Bug#1070733: linux-image-5.10.0-29-amd64 fails to boot with Error 16: Inconsistent filesystem structure
Dan Poltawski
dan.poltawski at tnp.net.uk
Wed May 15 21:03:56 BST 2024
Package: src:linux
Version: 5.10.216-1
Severity: grave
Justification: renders package unusable
Dear Maintainer,
After upgrading to linux-image-5.10.0-29 the system fails to boot with
grub 'Error 16: Inconsistent filesystem structure'. Booting into linux-image-5.10.0-28-amd64
and the system is once again bootable
The console displays:
Booting 'Debian GNU/Linux, kernel 5.10.0-29-amd64'
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz-5.10.0-29-amd64 root=UUID=ca38e015-f8d1-4ef0-9dc9-b56d7c8
le0f1 ro
[Linux-bzImage, setup=0x3c00, size=0x6b5f40]
Initrd /boot/initrd. img-5.10.0-29-amd64
Error 16: Inconsistent filesystem structure
Press any key to continue...-
-- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
sys_vendor: QEMU
product_name: Standard PC (i440FX + PIIX, 1996)
product_version: pc-i440fx-8.1
chassis_vendor: QEMU
chassis_version: pc-i440fx-8.1
bios_vendor: SeaBIOS
bios_version: rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] [8086:1237] (rev 02)
Subsystem: Red Hat, Inc. Qemu virtual machine [1af4:1100]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] [8086:7000]
Subsystem: Red Hat, Inc. Qemu virtual machine [1af4:1100]
Physical Slot: 1
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:01.1 IDE interface [0101]: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] [8086:7010] (prog-if 80 [ISA Compatibility mode-only controller, supports bus mastering])
Subsystem: Red Hat, Inc. Qemu virtual machine [1af4:1100]
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at 000001f0 (32-bit, non-prefetchable) [virtual] [size=8]
Region 1: Memory at 000003f0 (type 3, non-prefetchable) [virtual]
Region 2: Memory at 00000170 (32-bit, non-prefetchable) [virtual] [size=8]
Region 3: Memory at 00000370 (type 3, non-prefetchable) [virtual]
Region 4: I/O ports at e0e0 [virtual] [size=16]
Kernel driver in use: ata_piix
Kernel modules: ata_piix, ata_generic
00:01.2 USB controller [0c03]: Intel Corporation 82371SB PIIX3 USB [Natoma/Triton II] [8086:7020] (rev 01) (prog-if 00 [UHCI])
Subsystem: Red Hat, Inc. QEMU Virtual Machine [1af4:1100]
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at e080 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:01.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 03)
Subsystem: Red Hat, Inc. Qemu virtual machine [1af4:1100]
Physical Slot: 1
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 9
Kernel driver in use: piix4_smbus
Kernel modules: i2c_piix4
00:02.0 VGA compatible controller [0300]: Device [1234:1111] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Red Hat, Inc. Device [1af4:1100]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at fd000000 (32-bit, prefetchable) [size=16M]
Region 2: Memory at fea90000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at 000c0000 [disabled] [size=128K]
Kernel driver in use: bochs-drm
Kernel modules: bochs_drm
00:03.0 Unclassified device [00ff]: Red Hat, Inc. Virtio memory balloon [1af4:1002]
Subsystem: Red Hat, Inc. Virtio memory balloon [1af4:0005]
Physical Slot: 3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at e000 [size=64]
Region 4: Memory at fe400000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: virtio-pci
Kernel modules: virtio_pci
00:05.0 SCSI storage controller [0100]: Red Hat, Inc. Virtio SCSI [1af4:1004]
Subsystem: Red Hat, Inc. Virtio SCSI [1af4:0008]
Physical Slot: 5
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at e040 [size=64]
Region 1: Memory at fea91000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at fe404000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: virtio-pci
Kernel modules: virtio_pci
00:12.0 Ethernet controller [0200]: Red Hat, Inc. Virtio network device [1af4:1000]
Subsystem: Red Hat, Inc. Virtio network device [1af4:0001]
Physical Slot: 18
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at e0a0 [size=32]
Region 1: Memory at fea92000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at fe408000 (64-bit, prefetchable) [size=16K]
Expansion ROM at fea00000 [disabled] [size=256K]
Capabilities: <access denied>
Kernel driver in use: virtio-pci
Kernel modules: virtio_pci
00:13.0 Ethernet controller [0200]: Red Hat, Inc. Virtio network device [1af4:1000]
Subsystem: Red Hat, Inc. Virtio network device [1af4:0001]
Physical Slot: 19
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at e0c0 [size=32]
Region 1: Memory at fea93000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at fe40c000 (64-bit, prefetchable) [size=16K]
Expansion ROM at fea40000 [disabled] [size=256K]
Capabilities: <access denied>
Kernel driver in use: virtio-pci
Kernel modules: virtio_pci
00:1e.0 PCI bridge [0604]: Red Hat, Inc. QEMU PCI-PCI bridge [1b36:0001] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fea94000 (64-bit, non-prefetchable) [size=256]
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff [size=4K]
Memory behind bridge: fe800000-fe9fffff [size=2M]
Prefetchable memory behind bridge: 00000000fe200000-00000000fe3fffff [size=2M]
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 PCI bridge [0604]: Red Hat, Inc. QEMU PCI-PCI bridge [1b36:0001] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fea95000 (64-bit, non-prefetchable) [size=256]
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff [size=4K]
Memory behind bridge: fe600000-fe7fffff [size=2M]
Prefetchable memory behind bridge: 00000000fe000000-00000000fe1fffff [size=2M]
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
** USB devices:
not available
-- System Information:
Debian Release: 11.9
APT prefers oldstable-security
APT policy: (500, 'oldstable-security'), (500, 'oldstable')
Architecture: amd64 (x86_64)
Kernel: Linux 5.10.0-28-amd64 (SMP w/6 CPU threads)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-5.10.0-29-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.140
ii kmod 28-1
ii linux-base 4.6
Versions of packages linux-image-5.10.0-29-amd64 recommends:
ii apparmor 2.13.6-10
ii firmware-linux-free 20200122-1
Versions of packages linux-image-5.10.0-29-amd64 suggests:
pn debian-kernel-handbook <none>
pn grub-pc | grub-efi-amd64 | extlinux <none>
pn linux-doc-5.10 <none>
Versions of packages linux-image-5.10.0-29-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
More information about the Pkg-grub-devel
mailing list