[Pkg-kde-extras] Bug#688091: k3b: Fails to write CD-disks (error 254)
Matyashov Andrey
sysadmin at gorod0k.ru
Wed Sep 19 08:30:45 UTC 2012
Package: k3b
Version: 2.0.2-6
Severity: important
Tags: upstream
-- Package-specific info:
Device was not specified. Trying to find an appropriate drive...
Detected CD-R drive: /dev/cdrw
Using /dev/cdrom of unknown capabilities
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'Optiarc '
Identification : 'DVD RW AD-7173A '
Revision : '1-02'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.5.0 (SMP w/4 CPU cores; PREEMPT)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages k3b depends on:
ii cdparanoia 3.10.2+debian-10.1
ii cdrdao 1:1.2.3-0.3
ii genisoimage 9:1.1.11-2
ii k3b-data 2.0.2-6
ii kde-runtime 4:4.8.4-1
ii libc6 2.13-35
ii libk3b6 2.0.2-6
ii libkcddb4 4:4.8.4-2
ii libkcmutils4 4:4.8.4-3
ii libkde3support4 4:4.8.4-3
ii libkdecore5 4:4.8.4-3
ii libkdeui5 4:4.8.4-3
ii libkfile4 4:4.8.4-3
ii libkio5 4:4.8.4-3
ii libknotifyconfig4 4:4.8.4-3
ii libqt4-qt3support 4:4.8.2+dfsg-2
ii libqt4-xml 4:4.8.2+dfsg-2
ii libqtcore4 4:4.8.2+dfsg-2
ii libqtgui4 4:4.8.2+dfsg-2
ii libqtwebkit4 2.2.1-4+b1
ii libsolid4 4:4.8.4-3
ii libstdc++6 4.7.1-7
ii wodim 9:1.1.11-2
Versions of packages k3b recommends:
ii dvd+rw-tools 7.1-10
ii libk3b6-extracodecs 2.0.2-6
ii vcdimager 0.7.24-1+b1
Versions of packages k3b suggests:
pn k3b-extrathemes <none>
ii k3b-i18n 2.0.2-6
pn movixmaker-2 <none>
pn normalize-audio <none>
pn sox <none>
-- no debconf information
If you select "burn ISO-image", then after 10-15 seconds after recording starts an error: Programm cdrecord return unknown error (code 254)
Debug output:
Devices
-----------------------
Optiarc DVD RW AD-7173A 1-02 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, Последовательный DVD-R, Двухслойный последовательный DVD-R, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW с ограниченной перезаписью, Последовательный DVD-RW, DVD+RW, DVD+R, Двухслойный DVD+R, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96R, RAW/R96R, Ограниченная перезапись, Layer Jump] [%7]
System
-----------------------
K3b Version: 2.0.2
KDE Version: 4.8.4 (4.8.4)
QT Version: 4.8.2
Kernel: 3.5.0
Used versions
-----------------------
cdrecord: 1.1.11
cdrecord
-----------------------
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.11
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'Optiarc '
Identification : 'DVD RW AD-7173A '
Revision : '1-02'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM) (current)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Drive buf size : 890880 = 870 KB
FIFO size : 12582912 = 12288 KB
Speed set to 8467 KB/s
Track 01: data 255 MB
Total size: 292 MB (29:00.82) = 130562 sectors
Lout start: 293 MB (29:02/62) = 130562 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11634 (97:26/66)
ATIP start of lead out: 359846 (79:59/71)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 229284
Starting to write CD/DVD at speed 48.0 in real TAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01: 0 of 255 MB written.
Track 01: 1 of 255 MB written (fifo 100%) [buf 100%] 3.8x.
Track 01: 2 of 255 MB written (fifo 100%) [buf 100%] 6.5x.
Track 01: 3 of 255 MB written (fifo 100%) [buf 100%] 22.6x.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 00 07 A1 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 00 00 00 0A 00 00 00 00 08 03 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x08 Qual 0x03 (logical unit communication crc error (ultra-dma/32)) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.020s timeout 40s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
write track data: error after 3999744 bytes
Writing time: 26.664s
Average write speed 171.5x.
Min drive buffer fill was 100%
Fixating...
Fixating time: 24.603s
/usr/bin/wodim: fifo had 254 puts and 64 gets.
/usr/bin/wodim: fifo was 0 times empty and 49 times full, min fill was 96%.
BURN-Free was 1 times used.
cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=48 -tao driveropts=burnfree -data -tsize=130560s -
More information about the pkg-kde-extras
mailing list