[Pkg-libvirt-maintainers] Bug#758688: Bug#758688: libvirt-daemon-system (1.2.7-9) dist-upgrade failed

[Neutron Soutmun]

Hello, Guido

  As it's reproducible on my laptop also, below is the postinst traces
and full file is attached.

# apt-get -f install

Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
  linux-image-3.11-1-amd64 linux-image-3.11-2-amd64 linux-image-3.12-1-amd64
  linux-image-3.13-1-amd64 linux-image-3.13-1-amd64-dbg
  linux-image-3.14-1-amd64-dbg
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
2 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Setting up libvirt-daemon-system (1.2.7-10+b1) ...
+ set -e

[snip]

+ [ -d /run/systemd/system ]
+ systemctl is-enabled virtlockd.service
+ systemctl reload virtlockd.service
Job for virtlockd.service failed. See 'systemctl status virtlockd.service' and 'journalctl -xn' for details.
dpkg: error processing package libvirt-daemon-system (--configure):
 subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of libvirt-bin:
 libvirt-bin depends on libvirt-daemon-system (>= 1.2.7-10+b1); however:
  Package libvirt-daemon-system is not configured yet.

dpkg: error processing package libvirt-bin (--configure):
 dependency problems - leaving unconfigured
Errors were encountered while processing:
 libvirt-daemon-system
 libvirt-bin

----

To reproduce this, make the virtlockd.service inactive (it's already
inactive on my laptop on upgrade, not by this command)

# systemctl stop virtlockd.service
Warning: Stopping virtlockd.service, but it can still be activated by:
  virtlockd.socket

# apt-get install --reinstall libvirt-daemon-system
Reading package lists... Done
Building dependency tree       
Reading state information... Done
0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 0 not
upgraded.
Need to get 0 B/142 kB of archives.
After this operation, 0 B of additional disk space will be used.
(Reading database ... 192685 files and directories currently installed.)
Preparing to unpack .../libvirt-daemon-system_1.2.7-10+b1_amd64.deb ...
Unpacking libvirt-daemon-system (1.2.7-10+b1) over (1.2.7-10+b1) ...
Setting up libvirt-daemon-system (1.2.7-10+b1) ...
Job for virtlockd.service failed. See 'systemctl status
virtlockd.service' and 'journalctl -xn' for details.
dpkg: error processing package libvirt-daemon-system (--configure):
 subprocess installed post-installation script returned error exit
status 1
Errors were encountered while processing:
 libvirt-daemon-system
E: Sub-process /usr/bin/dpkg returned an error code (1)

Therefore, The patch to fix this is proposed earlier.

Cheers,
Neutron Soutmun
-------------- next part --------------
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
  linux-image-3.11-1-amd64 linux-image-3.11-2-amd64 linux-image-3.12-1-amd64
  linux-image-3.13-1-amd64 linux-image-3.13-1-amd64-dbg
  linux-image-3.14-1-amd64-dbg
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
2 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Setting up libvirt-daemon-system (1.2.7-10+b1) ...
+ set -e
+ add_users_groups
+ getent group libvirt
+ getent group kvm
+ getent passwd libvirt-qemu
+ getent group libvirt-qemu
+ add_statoverrides
+ ROOT_DIRS=        /var/lib/libvirt/images/         /var/lib/libvirt/boot/           /var/cache/libvirt/          
+ QEMU_DIRS=         /var/lib/libvirt/qemu/            /var/cache/libvirt/qemu/          /var/lib/libvirt/qemu/channel/          /var/lib/libvirt/qemu/channel/target/     
+ SANLOCK_DIR=/var/lib/libvirt/sanlock
+ QEMU_CONF=/etc/libvirt/qemu.conf
+ dpkg-statoverride --list /var/lib/libvirt/images/
+ [ ! -e /var/lib/libvirt/images/ ]
+ chown root:root /var/lib/libvirt/images/
+ [ ! -e /var/lib/libvirt/images/ ]
+ chmod 0711 /var/lib/libvirt/images/
+ dpkg-statoverride --list /var/lib/libvirt/boot/
+ [ ! -e /var/lib/libvirt/boot/ ]
+ chown root:root /var/lib/libvirt/boot/
+ [ ! -e /var/lib/libvirt/boot/ ]
+ chmod 0711 /var/lib/libvirt/boot/
+ dpkg-statoverride --list /var/cache/libvirt/
+ [ ! -e /var/cache/libvirt/ ]
+ chown root:root /var/cache/libvirt/
+ [ ! -e /var/cache/libvirt/ ]
+ chmod 0711 /var/cache/libvirt/
+ dpkg-statoverride --list /var/lib/libvirt/qemu/
+ [ ! -e /var/lib/libvirt/qemu/ ]
+ chown libvirt-qemu:libvirt-qemu /var/lib/libvirt/qemu/
+ [ ! -e /var/lib/libvirt/qemu/ ]
+ chmod 0750 /var/lib/libvirt/qemu/
+ dpkg-statoverride --list /var/cache/libvirt/qemu/
+ [ ! -e /var/cache/libvirt/qemu/ ]
+ chown libvirt-qemu:libvirt-qemu /var/cache/libvirt/qemu/
+ [ ! -e /var/cache/libvirt/qemu/ ]
+ chmod 0750 /var/cache/libvirt/qemu/
+ dpkg-statoverride --list /var/lib/libvirt/qemu/channel/
+ [ ! -e /var/lib/libvirt/qemu/channel/ ]
+ chown libvirt-qemu:libvirt-qemu /var/lib/libvirt/qemu/channel/
+ [ ! -e /var/lib/libvirt/qemu/channel/ ]
+ chmod 0750 /var/lib/libvirt/qemu/channel/
+ dpkg-statoverride --list /var/lib/libvirt/qemu/channel/target/
+ [ ! -e /var/lib/libvirt/qemu/channel/target/ ]
+ chown libvirt-qemu:libvirt-qemu /var/lib/libvirt/qemu/channel/target/
+ [ ! -e /var/lib/libvirt/qemu/channel/target/ ]
+ chmod 0750 /var/lib/libvirt/qemu/channel/target/
+ dpkg-statoverride --list /var/lib/libvirt/sanlock
+ [ ! -e /var/lib/libvirt/sanlock ]
+ chown root:root /var/lib/libvirt/sanlock
+ [ ! -e /var/lib/libvirt/sanlock ]
+ chmod 0700 /var/lib/libvirt/sanlock
+ dpkg-statoverride --list /etc/libvirt/qemu.conf
+ [ ! -e /etc/libvirt/qemu.conf ]
+ chown root:root /etc/libvirt/qemu.conf
+ [ ! -e /etc/libvirt/qemu.conf ]
+ chmod 0600 /etc/libvirt/qemu.conf
+ touch /var/log/libvirt/qemu/.placeholder
+ touch /var/log/libvirt/uml/.placeholder
+ touch /var/log/libvirt/lxc/.placeholder
+ [ ! -d /etc/apparmor.d/libvirtd ]
+ rmdir --ignore-fail-on-non-empty /etc/apparmor.d/libvirtd
+ [ -d /run/systemd/system ]
+ systemctl is-enabled virtlockd.service
+ systemctl reload virtlockd.service
Job for virtlockd.service failed. See 'systemctl status virtlockd.service' and 'journalctl -xn' for details.
dpkg: error processing package libvirt-daemon-system (--configure):
 subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of libvirt-bin:
 libvirt-bin depends on libvirt-daemon-system (>= 1.2.7-10+b1); however:
  Package libvirt-daemon-system is not configured yet.

dpkg: error processing package libvirt-bin (--configure):
 dependency problems - leaving unconfigured
Errors were encountered while processing:
 libvirt-daemon-system
 libvirt-bin
======  How can you help?  (doc: http://wiki.debian.org/how-can-i-help ) ======

-----  Show old opportunities as well as new ones: how-can-i-help --old  -----
E: Sub-process /usr/bin/dpkg returned an error code (1)
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.alioth.debian.org/pipermail/pkg-libvirt-maintainers/attachments/20140823/43b4d951/attachment.sig>