Bug#881543: -- updating --
gcab_dzan at libero.it
gcab_dzan at libero.it
Thu Nov 16 23:03:45 UTC 2017
Upon various retrials in installation and investigation I could determine the following facts.
a) booting on an installation with KDE selected, the stop point occurred at
“[ 31.724333] sddm-greeter[459]: segfault at 4 ip af76076d sp bfeca190 error 4 in libLLVM-3.9.so.1[aee5a000+2d1b000]”
(see att. dmesg3a.txt)
b) installing from the DVD without any DE, then adding the non-free ati drivers, the X11 and finally the Xfce packages,
I could successfuly boot into the Xfce desktop.
c) adding to the installation above the basic KDE files (unselecting the sddm) I could arrive up to the Xfce login prompt,
get the due selection for choosing to start the Plasma environment, and got blocked with a
“[ 255.753733] ksplashqml[1091]: segfault at 4 ip adc0e76d sp bf8a8040 error 4 in libLLVM-3.9.so.1[ad308000+2d1b000]”
“[ 323.574779] plasmashell[1452]: segfault at 4 ip a92e476d sp bfecb690 error 4 in libLLVM-3.9.so.1[a89de000+2d1b000]”
(see att. dmesg6a.txt)
So I re-assigned this bug to libLLVM, but I do not have the competence to definitely assert that.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/pkg-llvm-team/attachments/20171117/4603be59/attachment-0001.html>
-------------- next part --------------
## Upon installation of KDE (without smmd) together with Xfce ###
[ 0.000000] Linux version 4.9.0-4-686-pae (debian-kernel at lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.51-1 (2017-09-28)
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fffafff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003fffb000-0x000000003fffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003ffff000-0x000000003fffffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: System Manufacturer System Name/A7V600-X, BIOS ASUS A7V600-X ACPI BIOS Revision 1009 06/28/2005
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x3fffb max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 base 0F8000000 mask FFC000000 write-combining
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] initial memory mapped: [mem 0x00000000-0x03dfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] BRK [0x03957000, 0x03957fff] PGTABLE
[ 0.000000] BRK [0x03958000, 0x03959fff] PGTABLE
[ 0.000000] BRK [0x0395a000, 0x0395afff] PGTABLE
[ 0.000000] BRK [0x0395b000, 0x0395bfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35ec4000-0x36f59fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F5E30 000014 (v00 ASUS )
[ 0.000000] ACPI: RSDT 0x000000003FFFB000 000030 (v01 ASUS A7V600-X 42302E31 MSFT 31313031)
[ 0.000000] ACPI: FACP 0x000000003FFFB0B2 000074 (v01 ASUS A7V600-X 42302E31 MSFT 31313031)
[ 0.000000] ACPI: DSDT 0x000000003FFFB126 003098 (v01 ASUS A7V600-X 00001000 MSFT 0100000B)
[ 0.000000] ACPI: FACS 0x000000003FFFF000 000040
[ 0.000000] ACPI: BOOT 0x000000003FFFB030 000028 (v01 ASUS A7V600-X 42302E31 MSFT 31313031)
[ 0.000000] ACPI: APIC 0x000000003FFFB058 00005A (v01 ASUS A7V600-X 42302E31 MSFT 31313031)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 133MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000379fdfff]
[ 0.000000] HighMem [mem 0x00000000379fe000-0x000000003fffafff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000003fffafff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003fffafff]
[ 0.000000] On node 0 totalpages: 262041
[ 0.000000] free_area_init_node: node 0, pgdat c37e67c0, node_mem_map f70fe024
[ 0.000000] DMA zone: 36 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1967 pages used for memmap
[ 0.000000] Normal zone: 223742 pages, LIFO batch:31
[ 0.000000] HighMem zone: 34301 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0xe408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x40000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] percpu: Embedded 20 pages/cpu @f70e7000 s50764 r0 d31156 u81920
[ 0.000000] pcpu-alloc: s50764 r0 d31156 u81920 alloc=20*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260038
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz root=/dev/sda6
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:0003fffb)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 1011428K/1048164K available (5825K kernel code, 646K rwdata, 1716K rodata, 752K init, 456K bss, 36736K reserved, 0K cma-reserved, 137204K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
.init : 0xc3803000 - 0xc38bf000 ( 752 kB)
.data : 0xc35b0b14 - 0xc3801b00 (2371 kB)
.text : 0xc3000000 - 0xc35b0b14 (5826 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f582e000 soft=f5830000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1990.296 MHz processor
[ 0.004018] Calibrating delay loop (skipped), value calculated using timer frequency.. 3980.59 BogoMIPS (lpj=7961184)
[ 0.004109] pid_max: default: 32768 minimum: 301
[ 0.004199] ACPI: Core revision 20160831
[ 0.008443] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.008583] Security Framework initialized
[ 0.008628] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.008688] AppArmor: AppArmor disabled by boot time parameter
[ 0.008767] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.008815] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.009496] mce: CPU supports 4 MCE banks
[ 0.009565] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.009609] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.016316] Freeing SMP alternatives memory: 24K
[ 0.020019] ftrace: allocating 24038 entries in 47 pages
[ 0.028244] smpboot: Max logical packages: 1
[ 0.028306] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.029552] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.072000] smpboot: CPU0: AMD Athlon(TM) XP 2400+ (family: 0x6, model: 0x8, stepping: 0x1)
[ 0.072000] Performance Events: AMD PMU driver.
[ 0.072000] ... version: 0
[ 0.072000] ... bit width: 48
[ 0.072000] ... generic registers: 4
[ 0.072000] ... value mask: 0000ffffffffffff
[ 0.072000] ... max period: 00007fffffffffff
[ 0.072000] ... fixed-purpose events: 0
[ 0.072000] ... event mask: 000000000000000f
[ 0.072000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.072000] x86: Booted up 1 node, 1 CPUs
[ 0.072000] smpboot: Total of 1 processors activated (3980.59 BogoMIPS)
[ 0.072000] devtmpfs: initialized
[ 0.072000] PM: Registering ACPI NVS region [mem 0x3ffff000-0x3fffffff] (4096 bytes)
[ 0.072000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.072000] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.072000] pinctrl core: initialized pinctrl subsystem
[ 0.072000] NET: Registered protocol family 16
[ 0.072178] cpuidle: using governor ladder
[ 0.072221] cpuidle: using governor menu
[ 0.072291] Simple Boot Flag at 0x3a set to 0x1
[ 0.072355] ACPI: bus type PCI registered
[ 0.072399] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.072557] PCI: Using configuration type 1 for base access
[ 0.074553] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.075167] ACPI: Added _OSI(Module Device)
[ 0.075214] ACPI: Added _OSI(Processor Device)
[ 0.075255] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.075296] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.080054] ACPI: Interpreter enabled
[ 0.080136] ACPI: (supports S0 S1 S4 S5)
[ 0.080179] ACPI: Using IOAPIC for interrupt routing
[ 0.080280] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.089817] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
[ 0.090278] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12)
[ 0.090722] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
[ 0.091227] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 9 10 11 12)
[ 0.091772] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12)
[ 0.092274] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12)
[ 0.092787] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12)
[ 0.093254] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12) *15, disabled.
[ 0.093764] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.093819] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.093872] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.093922] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.094060] acpi PNP0A03:00: ignoring host bridge window [mem 0x000c8000-0x000dffff window] (conflicts with Video ROM [mem 0x000c0000-0x000ccfff])
[ 0.094344] PCI host bridge to bus 0000:00
[ 0.094388] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.094433] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.094479] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.094531] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff window]
[ 0.094583] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.094652] pci 0000:00:00.0: [1106:3189] type 00 class 0x060000
[ 0.094667] pci 0000:00:00.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[ 0.094848] pci 0000:00:01.0: [1106:b198] type 01 class 0x060400
[ 0.094895] pci 0000:00:01.0: supports D1
[ 0.094951] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.095094] pci 0000:00:0b.0: [14f1:2f00] type 00 class 0x078000
[ 0.095108] pci 0000:00:0b.0: reg 0x10: [mem 0xde800000-0xde80ffff]
[ 0.095117] pci 0000:00:0b.0: reg 0x14: [io 0xb800-0xb807]
[ 0.095174] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
[ 0.095300] pci 0000:00:0e.0: [11bd:0040] type 00 class 0x048000
[ 0.095314] pci 0000:00:0e.0: reg 0x10: [mem 0xde000000-0xde000fff]
[ 0.095377] pci 0000:00:0e.0: supports D1 D2
[ 0.095486] pci 0000:00:0e.1: [11bd:0041] type 00 class 0x048000
[ 0.095500] pci 0000:00:0e.1: reg 0x10: [mem 0xdd800000-0xdd800fff]
[ 0.095563] pci 0000:00:0e.1: supports D1 D2
[ 0.095667] pci 0000:00:0e.2: [11bd:0042] type 00 class 0x048000
[ 0.095682] pci 0000:00:0e.2: reg 0x10: [mem 0xdd000000-0xdd000fff]
[ 0.095744] pci 0000:00:0e.2: supports D1 D2
[ 0.095746] pci 0000:00:0e.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.095869] pci 0000:00:0f.0: [1106:3149] type 00 class 0x010400
[ 0.095884] pci 0000:00:0f.0: reg 0x10: [io 0xb400-0xb407]
[ 0.095893] pci 0000:00:0f.0: reg 0x14: [io 0xb000-0xb003]
[ 0.095902] pci 0000:00:0f.0: reg 0x18: [io 0xa800-0xa807]
[ 0.095911] pci 0000:00:0f.0: reg 0x1c: [io 0xa400-0xa403]
[ 0.095920] pci 0000:00:0f.0: reg 0x20: [io 0xa000-0xa00f]
[ 0.095929] pci 0000:00:0f.0: reg 0x24: [io 0x9800-0x98ff]
[ 0.096111] pci 0000:00:0f.1: [1106:0571] type 00 class 0x01018a
[ 0.096155] pci 0000:00:0f.1: reg 0x20: [io 0x9400-0x940f]
[ 0.096174] pci 0000:00:0f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.096221] pci 0000:00:0f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.096266] pci 0000:00:0f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.096311] pci 0000:00:0f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.096503] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
[ 0.096543] pci 0000:00:10.0: reg 0x20: [io 0x9000-0x901f]
[ 0.096582] pci 0000:00:10.0: supports D1 D2
[ 0.096584] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.096634] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.096762] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
[ 0.096802] pci 0000:00:10.1: reg 0x20: [io 0x8800-0x881f]
[ 0.096841] pci 0000:00:10.1: supports D1 D2
[ 0.096843] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.096893] pci 0000:00:10.1: System wakeup disabled by ACPI
[ 0.097022] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
[ 0.097062] pci 0000:00:10.2: reg 0x20: [io 0x8400-0x841f]
[ 0.097101] pci 0000:00:10.2: supports D1 D2
[ 0.097103] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.097152] pci 0000:00:10.2: System wakeup disabled by ACPI
[ 0.097282] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300
[ 0.097322] pci 0000:00:10.3: reg 0x20: [io 0x8000-0x801f]
[ 0.097361] pci 0000:00:10.3: supports D1 D2
[ 0.097363] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.097413] pci 0000:00:10.3: System wakeup disabled by ACPI
[ 0.097544] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
[ 0.097558] pci 0000:00:10.4: reg 0x10: [mem 0xdc800000-0xdc8000ff]
[ 0.097623] pci 0000:00:10.4: supports D1 D2
[ 0.097625] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.097678] pci 0000:00:10.4: System wakeup disabled by ACPI
[ 0.097810] pci 0000:00:11.0: [1106:3227] type 00 class 0x060100
[ 0.097869] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.097919] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices
[ 0.098106] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100
[ 0.098122] pci 0000:00:11.5: reg 0x10: [io 0xe000-0xe0ff]
[ 0.098190] pci 0000:00:11.5: supports D1 D2
[ 0.098311] pci 0000:00:11.6: [1106:3068] type 00 class 0x078000
[ 0.098324] pci 0000:00:11.6: reg 0x10: [io 0xe500-0xe5ff]
[ 0.098427] pci 0000:00:11.6: System wakeup disabled by ACPI
[ 0.098560] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000
[ 0.098575] pci 0000:00:12.0: reg 0x10: [io 0x7800-0x78ff]
[ 0.098584] pci 0000:00:12.0: reg 0x14: [mem 0xdc000000-0xdc0000ff]
[ 0.098644] pci 0000:00:12.0: supports D1 D2
[ 0.098646] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.098696] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.098904] pci 0000:01:00.0: [1002:5961] type 00 class 0x030000
[ 0.098918] pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf7ffffff pref]
[ 0.098925] pci 0000:01:00.0: reg 0x14: [io 0xd800-0xd8ff]
[ 0.098933] pci 0000:01:00.0: reg 0x18: [mem 0xdf800000-0xdf80ffff]
[ 0.098957] pci 0000:01:00.0: reg 0x30: [mem 0xeffe0000-0xefffffff pref]
[ 0.098987] pci 0000:01:00.0: supports D1 D2
[ 0.099066] pci 0000:01:00.1: [1002:5941] type 00 class 0x038000
[ 0.099078] pci 0000:01:00.1: reg 0x10: [mem 0xe0000000-0xe7ffffff pref]
[ 0.099086] pci 0000:01:00.1: reg 0x14: [mem 0xdf000000-0xdf00ffff]
[ 0.099137] pci 0000:01:00.1: supports D1 D2
[ 0.099237] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.099283] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.099287] pci 0000:00:01.0: bridge window [mem 0xdf000000-0xdfffffff]
[ 0.099291] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf7ffffff pref]
[ 0.099299] pci_bus 0000:00: on NUMA node 0
[ 0.101903] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.101957] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.102009] vgaarb: loaded
[ 0.102049] vgaarb: bridge control possible 0000:01:00.0
[ 0.102305] PCI: Using ACPI for IRQ routing
[ 0.102350] PCI: pci_cache_line_size set to 32 bytes
[ 0.102417] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.102420] e820: reserve RAM buffer [mem 0x3fffb000-0x3fffffff]
[ 0.102805] clocksource: Switched to clocksource refined-jiffies
[ 0.121661] VFS: Disk quotas dquot_6.6.0
[ 0.121764] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.122033] pnp: PnP ACPI init
[ 0.122410] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.122459] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.123680] system 00:00: [mem 0x00100000-0x3fffffff] could not be reserved
[ 0.123728] system 00:00: [mem 0xfec00000-0xfec000ff] could not be reserved
[ 0.123774] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.123824] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.124271] system 00:01: [io 0xe400-0xe47f] has been reserved
[ 0.124318] system 00:01: [io 0xe800-0xe81f] has been reserved
[ 0.124363] system 00:01: [mem 0xfff80000-0xffffffff] could not be reserved
[ 0.124409] system 00:01: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.124455] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.124569] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.124616] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.124776] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.125037] pnp 00:04: [dma 2]
[ 0.125101] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.125778] pnp 00:05: [dma 3]
[ 0.125857] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.126398] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.126900] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.127030] pnp 00:08: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.127765] pnp 00:09: Plug and Play ACPI device, IDs PNPb02f (active)
[ 0.127867] system 00:0a: [io 0x0290-0x0297] has been reserved
[ 0.127914] system 00:0a: [io 0x0370-0x0375] has been reserved
[ 0.127960] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.128087] pnp: PnP ACPI: found 11 devices
[ 0.128133] PnPBIOS: Disabled
[ 0.166558] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.166651] clocksource: Switched to clocksource acpi_pm
[ 0.166748] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.166794] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.166844] pci 0000:00:01.0: bridge window [mem 0xdf000000-0xdfffffff]
[ 0.166891] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf7ffffff pref]
[ 0.166950] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.166952] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.166955] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.166957] pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff window]
[ 0.166960] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.166962] pci_bus 0000:01: resource 1 [mem 0xdf000000-0xdfffffff]
[ 0.166964] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf7ffffff pref]
[ 0.167129] NET: Registered protocol family 2
[ 0.167517] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.167629] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.167795] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.167984] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.167984] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.167984] NET: Registered protocol family 1
[ 0.167984] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.167984] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
[ 0.167984] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.167984] PCI: CLS 32 bytes, default 32
[ 0.167984] Unpacking initramfs...
[ 0.762333] Freeing initrd memory: 16984K
[ 0.763284] audit: initializing netlink subsys (disabled)
[ 0.763385] audit: type=2000 audit(1510850460.759:1): initialized
[ 0.764129] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.764209] zbud: loaded
[ 0.765448] bounce: pool size: 64 pages
[ 0.765553] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.765664] io scheduler noop registered
[ 0.765706] io scheduler deadline registered
[ 0.765771] io scheduler cfq registered (default)
[ 0.766035] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.766091] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.766338] GHES: HEST is not enabled!
[ 0.766467] isapnp: Scanning for PnP cards...
[ 1.119941] isapnp: No Plug & Play device found
[ 1.120150] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.140602] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.141382] Linux agpgart interface v0.103
[ 1.141623] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[ 1.146474] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[ 1.146926] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.149665] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.149721] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.150087] mousedev: PS/2 mouse device common for all mice
[ 1.150221] rtc_cmos 00:03: RTC can wake from S4
[ 1.150475] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.150562] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram
[ 1.150645] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.151558] NET: Registered protocol family 10
[ 1.152120] mip6: Mobile IPv6
[ 1.152166] NET: Registered protocol family 17
[ 1.152210] mpls_gso: MPLS GSO support
[ 1.152530] microcode: AMD CPU family 0x6 not supported
[ 1.152580] Using IPI No-Shortcut mode
[ 1.152873] registered taskstats version 1
[ 1.152943] zswap: loaded using pool lzo/zbud
[ 1.153084] ima: No TPM chip found, activating TPM-bypass!
[ 1.153667] rtc_cmos 00:03: setting system clock to 2017-11-16 16:41:01 UTC (1510850461)
[ 1.153799] PM: Hibernation image not present or could not be loaded.
[ 1.155182] Freeing unused kernel memory: 752K
[ 1.155369] Write protecting the kernel text: 5828k
[ 1.155480] Write protecting the kernel read-only data: 1724k
[ 1.175287] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.199301] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.199764] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.200854] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.201111] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.203603] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.203855] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.204810] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.204994] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.205209] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.205396] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.307568] SCSI subsystem initialized
[ 1.322237] ACPI: bus type USB registered
[ 1.322356] usbcore: registered new interface driver usbfs
[ 1.322426] usbcore: registered new interface driver hub
[ 1.338071] libata version 3.00 loaded.
[ 1.338710] pata_via 0000:00:0f.1: version 0.3.4
[ 1.341583] usbcore: registered new device driver usb
[ 1.342999] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.343950] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.345239] ehci-pci: EHCI PCI platform driver
[ 1.350060] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[ 1.354133] Floppy drive(s): fd0 is 1.44M
[ 1.357803] scsi host0: pata_via
[ 1.364635] scsi host1: pata_via
[ 1.364873] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x9400 irq 14
[ 1.364920] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x9408 irq 15
[ 1.365375] ehci-pci 0000:00:10.4: EHCI Host Controller
[ 1.365453] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 1.365600] ehci-pci 0000:00:10.4: irq 21, io mem 0xdc800000
[ 1.379374] FDC 0 is a post-1991 82077
[ 1.380545] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 1.380747] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.380794] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.380846] usb usb1: Product: EHCI Host Controller
[ 1.380888] usb usb1: Manufacturer: Linux 4.9.0-4-686-pae ehci_hcd
[ 1.380933] usb usb1: SerialNumber: 0000:00:10.4
[ 1.381309] hub 1-0:1.0: USB hub found
[ 1.381953] hub 1-0:1.0: 8 ports detected
[ 1.383209] via-rhine 0000:00:12.0 eth0: VIA Rhine II at 0x17800, 00:0e:a6:38:b2:31, IRQ 23
[ 1.384075] via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 41e1
[ 1.384466] sata_via 0000:00:0f.0: version 2.6
[ 1.384757] sata_via 0000:00:0f.0: routed to hard irq line 0
[ 1.398559] scsi host2: sata_via
[ 1.408945] scsi host3: sata_via
[ 1.409175] ata3: SATA max UDMA/133 cmd 0xb400 ctl 0xb000 bmdma 0xa000 irq 20
[ 1.409223] ata4: SATA max UDMA/133 cmd 0xa800 ctl 0xa400 bmdma 0xa008 irq 20
[ 1.409626] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 1.409687] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 1.409749] uhci_hcd 0000:00:10.0: detected 2 ports
[ 1.409817] uhci_hcd 0000:00:10.0: irq 21, io base 0x00009000
[ 1.410182] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.410229] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.410280] usb usb2: Product: UHCI Host Controller
[ 1.410323] usb usb2: Manufacturer: Linux 4.9.0-4-686-pae uhci_hcd
[ 1.410366] usb usb2: SerialNumber: 0000:00:10.0
[ 1.410737] hub 2-0:1.0: USB hub found
[ 1.410795] hub 2-0:1.0: 2 ports detected
[ 1.411289] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 1.411344] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 1.411403] uhci_hcd 0000:00:10.1: detected 2 ports
[ 1.411469] uhci_hcd 0000:00:10.1: irq 21, io base 0x00008800
[ 1.411632] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.411678] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.411730] usb usb3: Product: UHCI Host Controller
[ 1.411772] usb usb3: Manufacturer: Linux 4.9.0-4-686-pae uhci_hcd
[ 1.411816] usb usb3: SerialNumber: 0000:00:10.1
[ 1.412226] hub 3-0:1.0: USB hub found
[ 1.412284] hub 3-0:1.0: 2 ports detected
[ 1.412873] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 1.412928] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 1.412987] uhci_hcd 0000:00:10.2: detected 2 ports
[ 1.413053] uhci_hcd 0000:00:10.2: irq 21, io base 0x00008400
[ 1.414179] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.414237] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.414289] usb usb4: Product: UHCI Host Controller
[ 1.414331] usb usb4: Manufacturer: Linux 4.9.0-4-686-pae uhci_hcd
[ 1.414375] usb usb4: SerialNumber: 0000:00:10.2
[ 1.415679] hub 4-0:1.0: USB hub found
[ 1.416072] hub 4-0:1.0: 2 ports detected
[ 1.418722] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 1.418793] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 1.418855] uhci_hcd 0000:00:10.3: detected 2 ports
[ 1.418926] uhci_hcd 0000:00:10.3: irq 21, io base 0x00008000
[ 1.420084] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.420142] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.420195] usb usb5: Product: UHCI Host Controller
[ 1.420237] usb usb5: Manufacturer: Linux 4.9.0-4-686-pae uhci_hcd
[ 1.420281] usb usb5: SerialNumber: 0000:00:10.3
[ 1.422257] hub 5-0:1.0: USB hub found
[ 1.423771] hub 5-0:1.0: 2 ports detected
[ 1.477329] via-rhine 0000:00:12.0 enp0s18: renamed from eth0
[ 1.533321] ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
[ 1.533382] ata1.00: 160086528 sectors, multi 16: LBA
[ 1.544298] ata1.01: ATA-7: WDC WD2500JB-00REA0, 20.00K20, max UDMA/100
[ 1.544344] ata1.01: 488397168 sectors, multi 16: LBA48
[ 1.549165] ata1.00: configured for UDMA/133
[ 1.551850] ata1.01: configured for UDMA/100
[ 1.552235] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y080L0 1BW0 PQ: 0 ANSI: 5
[ 1.553658] scsi 0:0:1:0: Direct-Access ATA WDC WD2500JB-00R 0K20 PQ: 0 ANSI: 5
[ 1.616051] ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 1.708018] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 1.732778] ata2.00: ATAPI: JLMS XJ-HD166S, DS1A, max UDMA/33
[ 1.732830] ata2.01: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL12, max UDMA/33
[ 1.733334] ata2.00: configured for UDMA/33
[ 1.756227] ata2.01: configured for UDMA/33
[ 1.759110] scsi 1:0:0:0: CD-ROM JLMS XJ-HD166S DS1A PQ: 0 ANSI: 5
[ 1.773432] psmouse serio1: logips2pp: Detected unknown Logitech mouse model 105
[ 1.773587] scsi 1:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-H10N JL12 PQ: 0 ANSI: 5
[ 1.792033] tsc: Refined TSC clocksource calibration: 1990.226 MHz
[ 1.792098] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39603a5bb21, max_idle_ns: 881590497410 ns
[ 1.860654] usb 1-3: New USB device found, idVendor=1a40, idProduct=0101
[ 1.860703] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.860749] usb 1-3: Product: USB 2.0 Hub
[ 1.862063] hub 1-3:1.0: USB hub found
[ 1.862421] hub 1-3:1.0: 4 ports detected
[ 1.992030] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 2.019204] sd 0:0:0:0: [sda] 160086528 512-byte logical blocks: (82.0 GB/76.3 GiB)
[ 2.019355] sd 0:0:0:0: [sda] Write Protect is off
[ 2.019400] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.019439] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.024650] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 2.024719] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.026328] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.043848] sr 1:0:1:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.045341] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 2.052234] sd 0:0:1:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 2.052513] sd 0:0:1:0: [sdb] Write Protect is off
[ 2.052558] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.068600] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.099601] random: fast init done
[ 2.099677] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[ 2.110069] sdb: sdb1 sdb2
[ 2.111612] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.112999] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 2.269618] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[ 2.816117] clocksource: Switched to clocksource tsc
[ 4.076143] random: crng init done
[ 4.254042] PM: Starting manual resume from disk
[ 4.254114] PM: Hibernation image partition 8:8 present
[ 4.254115] PM: Looking for hibernation image.
[ 4.254581] PM: Image not found (code -22)
[ 4.254584] PM: Hibernation image not present or could not be loaded.
[ 4.615895] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 5.747378] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.825631] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 5.826038] systemd[1]: Detected architecture x86.
[ 5.851142] systemd[1]: Set hostname to <sar-dst>.
[ 6.971165] systemd[1]: Created slice System Slice.
[ 6.971936] systemd[1]: Listening on udev Kernel Socket.
[ 6.972466] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 6.972903] systemd[1]: Listening on udev Control Socket.
[ 6.973437] systemd[1]: Listening on Journal Audit Socket.
[ 6.973865] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 6.974290] systemd[1]: Listening on Journal Socket.
[ 7.548425] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 7.936669] systemd-journald[173]: Received request to flush runtime journal from PID 1
[ 9.279577] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 9.279651] ACPI: Power Button [PWRB]
[ 9.279850] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 9.279903] ACPI: Power Button [PWRF]
[ 9.415556] parport_pc 00:05: reported by Plug and Play ACPI
[ 9.415734] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 9.434632] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.622987] MPU-401 device not found or device busy
[ 9.685849] gameport gameport0: NS558 PnP Gameport is pnp00:09/gameport0, io 0x200, speed 1036kHz
[ 9.896089] [drm] Initialized
[ 10.035350] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 10.035576] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 10.035698] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 10.035817] sr 1:0:1:0: Attached scsi generic sg3 type 5
[ 10.225389] [drm] radeon kernel modesetting enabled.
[ 10.232448] [drm] initializing kernel modesetting (RV280 0x1002:0x5961 0x174B:0x7C13 0x01).
[ 10.232544] [drm] register mmio base: 0xDF800000
[ 10.232586] [drm] register mmio size: 65536
[ 10.234644] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[ 10.234700] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
[ 10.234801] radeon 0000:01:00.0: putting AGP V3 device into 8x mode
[ 10.234849] radeon 0000:01:00.0: GTT: 64M 0xF8000000 - 0xFBFFFFFF
[ 10.234895] [drm] Generation 2 PCI interface, using max accessible memory
[ 10.234942] radeon 0000:01:00.0: limiting VRAM to PCI aperture size
[ 10.234987] radeon 0000:01:00.0: VRAM: 128M 0x00000000F0000000 - 0x00000000F7FFFFFF (128M used)
[ 10.244592] [drm] Detected VRAM RAM=128M, BAR=128M
[ 10.244649] [drm] RAM width 128bits DDR
[ 10.248568] [TTM] Zone kernel: Available graphics memory: 445992 kiB
[ 10.248626] [TTM] Zone highmem: Available graphics memory: 514594 kiB
[ 10.248670] [TTM] Initializing pool allocator
[ 10.248723] [TTM] Initializing DMA pool allocator
[ 10.248836] [drm] radeon: 128M of VRAM memory ready
[ 10.248880] [drm] radeon: 64M of GTT memory ready.
[ 10.250029] radeon 0000:01:00.0: WB disabled
[ 10.250094] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000f8000000 and cpu addr 0xf8325000
[ 10.250152] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 10.250196] [drm] Driver supports precise vblank timestamp query.
[ 10.250281] [drm] radeon: irq initialized.
[ 10.250365] [drm] Loading R200 Microcode
[ 10.321834] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/R200_cp.bin
[ 10.322236] [drm] radeon: ring at 0x00000000F8001000
[ 10.322303] [drm] ring test succeeded in 1 usecs
[ 10.322679] [drm] ib test succeeded in 0 usecs
[ 10.323473] [drm] Radeon Display Connectors
[ 10.323519] [drm] Connector 0:
[ 10.323557] [drm] VGA-1
[ 10.323597] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 10.323640] [drm] Encoders:
[ 10.323678] [drm] CRT1: INTERNAL_DAC1
[ 10.323718] [drm] Connector 1:
[ 10.323757] [drm] DVI-I-1
[ 10.323795] [drm] HPD1
[ 10.323833] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 10.323876] [drm] Encoders:
[ 10.323914] [drm] CRT2: INTERNAL_DAC2
[ 10.323953] [drm] DFP1: INTERNAL_TMDS1
[ 10.323993] [drm] Connector 2:
[ 10.324093] [drm] SVIDEO-1
[ 10.324132] [drm] Encoders:
[ 10.324171] [drm] TV1: INTERNAL_DAC2
[ 10.389276] [drm] fb mappable at 0xF0040000
[ 10.389334] [drm] vram apper at 0xF0000000
[ 10.389374] [drm] size 3145728
[ 10.389413] [drm] fb depth is 24
[ 10.389452] [drm] pitch is 4096
[ 10.416268] fbcon: radeondrmfb (fb0) is primary device
[ 10.564490] Console: switching to colour frame buffer device 128x48
[ 10.616328] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 10.616555] [drm] Initialized radeon 2.49.0 20080528 for 0000:01:00.0 on minor 0
[ 10.764099] snd_via82xx 0000:00:11.5: codec_read: codec 0 is not valid [0xfe0000]
[ 10.771364] snd_via82xx 0000:00:11.5: codec_read: codec 0 is not valid [0xfe0000]
[ 10.782894] snd_via82xx 0000:00:11.5: codec_read: codec 0 is not valid [0xfe0000]
[ 10.792980] snd_via82xx 0000:00:11.5: codec_read: codec 0 is not valid [0xfe0000]
[ 10.813272] snd_via82xx_modem 0000:00:11.6: enabling device (0000 -> 0001)
[ 11.326460] Adding 1034236k swap on /dev/sda8. Priority:-1 extents:1 across:1034236k FS
[ 11.855773] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 12.097479] snd_via82xx_modem: probe of 0000:00:11.6 failed with error -13
[ 12.678249] ppdev: user-space parallel port driver
[ 18.796763] IPv6: ADDRCONF(NETDEV_UP): enp0s18: link is not ready
[ 255.753733] ksplashqml[1091]: segfault at 4 ip adc0e76d sp bf8a8040 error 4 in libLLVM-3.9.so.1[ad308000+2d1b000]
[ 323.574779] plasmashell[1452]: segfault at 4 ip a92e476d sp bfecb690 error 4 in libLLVM-3.9.so.1[a89de000+2d1b000]
More information about the Pkg-llvm-team
mailing list