Bug#670377: i965-va-driver: i965_drv_video.so init failed on Intel GM965/GL960 or 965GM
Jaime Silva
jaimealbertosilva at gmail.com
Wed Apr 25 03:13:19 UTC 2012
Package: i965-va-driver
Version: 1.0.16-4
Severity: important
Dear Maintainer,
When I run vainfo I get the following:
jaime at inspironjaime2:~$ vainfo
libva: VA-API version 0.32.0
libva: va_getDriverName() returns 0
libva: Trying to open /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so
libva error: /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so init failed
libva: va_openDriver() returns -1
vaInitialize failed with error code -1 (unknown libva error),exit
jaime at inspironjaime2:~$
I don't understand why if this card is supported the library fails.
It is also weird that reportbug keeps saying the package is not installed after
I purged it and reinstalled it:
reportbug 6.3.1
There may be a problem with your installation of
i965-va-driver;
the following problems were detected by debsums:
debsums: package i965-va-driver is not installed
Do you still want to file a report?
Thanks a lot for any help on this issue.
-- lspci
jaime at inspironjaime2:~$ lspci -vvv
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory
Controller Hub (rev 0c)
Subsystem: Dell Inspiron 1420
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation Mobile
GM965/GL960 Integrated Graphics Controller (primary) (rev 0c) (prog-if
00 [VGA controller])
Subsystem: Dell Inspiron 1420
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at fea00000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at eff8 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960
Integrated Graphics Controller (secondary) (rev 0c)
Subsystem: Dell Dell Inspiron 1420
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at feb00000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB
UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Inspiron 1420
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f20 [size=32]
Kernel driver in use: uhci_hcd
00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB
UHCI Controller #5 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Inspiron 1420
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f00 [size=32]
Kernel driver in use: uhci_hcd
00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2
EHCI Controller #2 (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Inspiron 1420
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller (rev 02)
Subsystem: Dell Inspiron 1420
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at fe9fc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 1 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: c0400000-c05fffff
Prefetchable memory behind bridge: 00000000c0600000-00000000c07fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 2 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: fe800000-fe8fffff
Prefetchable memory behind bridge: 00000000c0200000-00000000c03fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 4 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=0e, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe600000-fe7fffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 6 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fe500000-fe5fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000c01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB
UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Inspiron 1420
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f80 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB
UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Inspiron 1420
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f60 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB
UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Inspiron 1420
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 6f40 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2
EHCI Controller #1 (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Inspiron 1420
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2)
(prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fe400000-fe4fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface
Controller (rev 02)
Subsystem: Dell Inspiron 1420
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E)
IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Dell Inspiron 1420
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 6fa0 [size=16]
Kernel driver in use: ata_piix
00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E)
SATA Controller [AHCI mode] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device 01f3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 44
Region 0: I/O ports at 6eb0 [size=8]
Region 1: I/O ports at 6eb8 [size=4]
Region 2: I/O ports at 6ec0 [size=8]
Region 3: I/O ports at 6ec8 [size=4]
Region 4: I/O ports at 6ee0 [size=32]
Region 5: Memory at fe9fb800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
Subsystem: Dell Inspiron 1420
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe9fb700 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 10c0 [size=32]
Kernel driver in use: i801_smbus
03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller
(rev 05) (prog-if 10 [OHCI])
Subsystem: Dell Inspiron 1420
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fe4ff800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro
Host Adapter (rev 22) (prog-if 01)
Subsystem: Dell Inspiron 1420
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at fe4ff400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host
Adapter (rev 12)
Subsystem: Dell Inspiron 1420
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at fe4ff600 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: r592
03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
Subsystem: Dell Inspiron 1420
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at fe4ff700 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: r852
09:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M
Fast Ethernet PCI Express (rev 02)
Subsystem: Dell Inspiron 1420
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at fe5f0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
0c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG
[Golan] Network Connection (rev 02)
Subsystem: Intel Corporation Device 1020
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at fe8ff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: iwl3945
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (110, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages i965-va-driver depends on:
ii libc6 2.13-30
ii libdrm-intel1 2.4.33-1
ii libdrm2 2.4.33-1
ii libva-x11-1 1.0.15-4
ii libva1 1.0.15-4
ii multiarch-support 2.13-30
i965-va-driver recommends no packages.
i965-va-driver suggests no packages.
-- no debconf information
-- debsums errors found:
debsums: package i965-va-driver is not installed
*** /var/log/Xorg.0.log
[ 30.423]
X.Org X Server 1.11.4
Release Date: 2012-01-27
[ 30.436] X Protocol Version 11, Revision 0
[ 30.436] Build Operating System: Linux 3.2.0-1-amd64 x86_64 Debian
[ 30.436] Current Operating System: Linux inspironjaime2
3.2.0-2-amd64 #1 SMP Sun Apr 15 16:47:38 UTC 2012 x86_64
[ 30.436] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-amd64
root=UUID=15909586-41bf-4839-a62c-99f7e70087d4 ro
usbcore.autosuspend=1 splash quiet
[ 30.436] Build Date: 04 March 2012 11:42:13PM
[ 30.436] xorg-server 2:1.11.4-1 (Cyril Brulebois <kibi at debian.org>)
[ 30.436] Current version of pixman: 0.24.4
[ 30.436] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 30.436] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 30.436] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 24
19:52:52 2012
[ 30.570] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 30.642] (==) No Layout section. Using the first Screen section.
[ 30.642] (==) No screen section available. Using defaults.
[ 30.642] (**) |-->Screen "Default Screen Section" (0)
[ 30.642] (**) | |-->Monitor "<default monitor>"
[ 30.658] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 30.658] (==) Automatically adding devices
[ 30.658] (==) Automatically enabling devices
[ 30.721] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 30.721] Entry deleted from font path.
[ 30.980] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 30.980] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 30.980] (II) The server relies on udev to provide the list of
input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 30.980] (II) Loader magic: 0x7faafc419ae0
[ 30.980] (II) Module ABI versions:
[ 30.980] X.Org ANSI C Emulation: 0.4
[ 30.980] X.Org Video Driver: 11.0
[ 30.980] X.Org XInput driver : 13.0
[ 30.980] X.Org Server Extension : 6.0
[ 30.981] (--) PCI:*(0:0:2:0) 8086:2a02:1028:01f3 rev 12, Mem @
0xfea00000/1048576, 0xe0000000/268435456, I/O @ 0x0000eff8/8
[ 30.981] (--) PCI: (0:0:2:1) 8086:2a03:1028:01f3 rev 12, Mem @
0xfeb00000/1048576
[ 30.981] (II) Open ACPI successful (/var/run/acpid.socket)
[ 30.981] (II) LoadModule: "extmod"
[ 31.116] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 31.175] (II) Module extmod: vendor="X.Org Foundation"
[ 31.175] compiled for 1.11.4, module version = 1.0.0
[ 31.175] Module class: X.Org Server Extension
[ 31.175] ABI class: X.Org Server Extension, version 6.0
[ 31.175] (II) Loading extension SELinux
[ 31.175] (II) Loading extension MIT-SCREEN-SAVER
[ 31.175] (II) Loading extension XFree86-VidModeExtension
[ 31.175] (II) Loading extension XFree86-DGA
[ 31.175] (II) Loading extension DPMS
[ 31.175] (II) Loading extension XVideo
[ 31.175] (II) Loading extension XVideo-MotionCompensation
[ 31.175] (II) Loading extension X-Resource
[ 31.175] (II) LoadModule: "dbe"
[ 31.175] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 31.437] (II) Module dbe: vendor="X.Org Foundation"
[ 31.479] compiled for 1.11.4, module version = 1.0.0
[ 31.479] Module class: X.Org Server Extension
[ 31.479] ABI class: X.Org Server Extension, version 6.0
[ 31.479] (II) Loading extension DOUBLE-BUFFER
[ 31.479] (II) LoadModule: "glx"
[ 31.479] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 31.898] (II) Module glx: vendor="X.Org Foundation"
[ 31.898] compiled for 1.11.4, module version = 1.0.0
[ 31.898] ABI class: X.Org Server Extension, version 6.0
[ 31.898] (==) AIGLX enabled
[ 31.898] (II) Loading extension GLX
[ 31.905] (II) LoadModule: "record"
[ 31.905] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 31.933] (II) Module record: vendor="X.Org Foundation"
[ 31.933] compiled for 1.11.4, module version = 1.13.0
[ 31.933] Module class: X.Org Server Extension
[ 31.933] ABI class: X.Org Server Extension, version 6.0
[ 31.933] (II) Loading extension RECORD
[ 31.933] (II) LoadModule: "dri"
[ 31.933] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 31.961] (II) Module dri: vendor="X.Org Foundation"
[ 31.961] compiled for 1.11.4, module version = 1.0.0
[ 31.961] ABI class: X.Org Server Extension, version 6.0
[ 31.961] (II) Loading extension XFree86-DRI
[ 31.961] (II) LoadModule: "dri2"
[ 31.961] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 32.110] (II) Module dri2: vendor="X.Org Foundation"
[ 32.111] compiled for 1.11.4, module version = 1.2.0
[ 32.111] ABI class: X.Org Server Extension, version 6.0
[ 32.111] (II) Loading extension DRI2
[ 32.111] (==) Matched intel as autoconfigured driver 0
[ 32.111] (==) Matched vesa as autoconfigured driver 1
[ 32.111] (==) Matched fbdev as autoconfigured driver 2
[ 32.111] (==) Assigned the driver to the xf86ConfigLayout
[ 32.111] (II) LoadModule: "intel"
[ 32.111] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 32.302] (II) Module intel: vendor="X.Org Foundation"
[ 32.302] compiled for 1.11.4, module version = 2.18.0
[ 32.302] Module class: X.Org Video Driver
[ 32.302] ABI class: X.Org Video Driver, version 11.0
[ 32.302] (II) LoadModule: "vesa"
[ 32.366] (WW) Warning, couldn't open module vesa
[ 32.366] (II) UnloadModule: "vesa"
[ 32.366] (II) Unloading vesa
[ 32.366] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 32.366] (II) LoadModule: "fbdev"
[ 32.366] (WW) Warning, couldn't open module fbdev
[ 32.366] (II) UnloadModule: "fbdev"
[ 32.366] (II) Unloading fbdev
[ 32.366] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 32.366] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 32.366] (++) using VT number 7
[ 32.397] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 32.397] drmOpenDevice: node name is /dev/dri/card0
[ 32.397] drmOpenDevice: open result is 9, (OK)
[ 32.397] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 32.397] drmOpenDevice: node name is /dev/dri/card0
[ 32.397] drmOpenDevice: open result is 9, (OK)
[ 32.397] drmOpenByBusid: drmOpenMinor returns 9
[ 32.397] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 32.397] (II) intel(0): Creating default Display subsection in
Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 32.398] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 32.398] (==) intel(0): RGB weight 888
[ 32.398] (==) intel(0): Default visual is TrueColor
[ 32.398] (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
[ 32.398] (--) intel(0): Chipset: "965GM"
[ 32.398] (**) intel(0): Relaxed fencing enabled
[ 32.398] (**) intel(0): Wait on SwapBuffers? enabled
[ 32.398] (**) intel(0): Triple buffering? enabled
[ 32.398] (**) intel(0): Framebuffer tiled
[ 32.398] (**) intel(0): Pixmaps tiled
[ 32.398] (**) intel(0): 3D buffers tiled
[ 32.398] (**) intel(0): SwapBuffers wait enabled
[ 32.398] (==) intel(0): video overlay key set to 0x101fe
[ 32.398] (II) intel(0): Output LVDS1 has no monitor section
[ 32.399] (II) intel(0): found backlight control interface
/sys/class/backlight/acpi_video0
[ 32.424] (II) intel(0): Output VGA1 has no monitor section
[ 32.689] (II) intel(0): Output TV1 has no monitor section
[ 32.689] (II) intel(0): EDID for output LVDS1
[ 32.689] (II) intel(0): Manufacturer: AUO Model: 1447 Serial#: 0
[ 32.689] (II) intel(0): Year: 2006 Week: 1
[ 32.689] (II) intel(0): EDID Version: 1.3
[ 32.689] (II) intel(0): Digital Display Input
[ 32.689] (II) intel(0): Max Image Size [cm]: horiz.: 30 vert.: 19
[ 32.689] (II) intel(0): Gamma: 2.20
[ 32.689] (II) intel(0): No DPMS capabilities specified
[ 32.689] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 32.689] (II) intel(0): First detailed timing is preferred mode
[ 32.689] (II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310
greenY: 0.550
[ 32.689] (II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313
whiteY: 0.329
[ 32.689] (II) intel(0): Manufacturer's mask: 0
[ 32.689] (II) intel(0): Supported detailed timing:
[ 32.689] (II) intel(0): clock: 108.2 MHz Image Size: 303 x 189 mm
[ 32.689] (II) intel(0): h_active: 1440 h_sync: 1504 h_sync_end
1536 h_blank_end 1972 h_border: 0
[ 32.689] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 906
v_blanking: 914 v_border: 0
[ 32.689] (II) intel(0): TM247
[ 32.689] (II) intel(0): )9FOo���
[ 32.689] (II) intel(0): EDID (in hex):
[ 32.689] (II) intel(0): 00ffffffffffff0006af471400000000
[ 32.689] (II) intel(0): 01100103801e13780a87f594574f8c27
[ 32.689] (II) intel(0): 27505400000001010101010101010101
[ 32.689] (II) intel(0): 010101010101442aa01452840e304020
[ 32.689] (II) intel(0): 33002fbd100000190000000000000000
[ 32.689] (II) intel(0): 00000000000000000000000000fe0054
[ 32.689] (II) intel(0): 4d3234370042313431505731000000fe
[ 32.689] (II) intel(0): 002939464f6f8cb3ff02010a202000b1
[ 32.689] (II) intel(0): EDID vendor "AUO", prod id 5191
[ 32.689] (II) intel(0): Printing DDC gathered Modelines:
[ 32.689] (II) intel(0): Modeline "1440x900"x0.0 108.20 1440 1504
1536 1972 900 903 906 914 -hsync -vsync (54.9 kHz)
[ 32.713] (II) intel(0): Not using default mode "320x240"
(doublescan mode not supported)
[ 32.713] (II) intel(0): Not using default mode "400x300"
(doublescan mode not supported)
[ 32.713] (II) intel(0): Not using default mode "400x300"
(doublescan mode not supported)
[ 32.713] (II) intel(0): Not using default mode "512x384"
(doublescan mode not supported)
[ 32.713] (II) intel(0): Not using default mode "640x480"
(doublescan mode not supported)
[ 32.713] (II) intel(0): Not using default mode "640x512"
(doublescan mode not supported)
[ 32.713] (II) intel(0): Not using default mode "800x600"
(doublescan mode not supported)
[ 32.713] (II) intel(0): Not using default mode "896x672"
(doublescan mode not supported)
[ 32.713] (II) intel(0): Not using default mode "928x696"
(doublescan mode not supported)
[ 32.713] (II) intel(0): Not using default mode "960x720"
(doublescan mode not supported)
[ 32.713] (II) intel(0): Not using default mode "576x432"
(doublescan mode not supported)
[ 32.713] (II) intel(0): Not using default mode "680x384"
(doublescan mode not supported)
[ 32.713] (II) intel(0): Not using default mode "680x384"
(doublescan mode not supported)
[ 32.713] (II) intel(0): Not using default mode "700x525"
(doublescan mode not supported)
[ 32.713] (II) intel(0): Not using default mode "720x450"
(doublescan mode not supported)
[ 32.713] (II) intel(0): Not using default mode "800x512"
(doublescan mode not supported)
[ 32.713] (II) intel(0): Not using default mode "840x525"
(doublescan mode not supported)
[ 32.713] (II) intel(0): Not using default mode "840x525"
(doublescan mode not supported)
[ 32.713] (II) intel(0): Not using default mode "960x540"
(doublescan mode not supported)
[ 32.713] (II) intel(0): Not using default mode "960x600"
(doublescan mode not supported)
[ 32.713] (II) intel(0): Not using default mode "1024x768"
(doublescan mode not supported)
[ 32.713] (II) intel(0): Printing probed modes for output LVDS1
[ 32.713] (II) intel(0): Modeline "1440x900"x60.0 108.20 1440
1504 1536 1972 900 903 906 914 -hsync -vsync (54.9 kHz)
[ 32.713] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440
1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 32.713] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360
1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 32.714] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360
1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz)
[ 32.714] (II) intel(0): Modeline "1152x864"x60.0 81.62 1152
1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz)
[ 32.714] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024
1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 32.714] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840
968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 32.714] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824
896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 32.714] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656
752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 32.736] (II) intel(0): EDID for output VGA1
[ 33.005] (II) intel(0): EDID for output TV1
[ 33.005] (II) intel(0): Output LVDS1 connected
[ 33.005] (II) intel(0): Output VGA1 disconnected
[ 33.005] (II) intel(0): Output TV1 disconnected
[ 33.005] (II) intel(0): Using exact sizes for initial modes
[ 33.005] (II) intel(0): Output LVDS1 using initial mode 1440x900
[ 33.005] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0)
unless otherwise stated.
[ 33.005] (II) intel(0): Kernel page flipping support detected, enabling
[ 33.005] (**) intel(0): Display dimensions: (300, 190) mm
[ 33.005] (**) intel(0): DPI set to (121, 120)
[ 33.005] (II) Loading sub module "fb"
[ 33.005] (II) LoadModule: "fb"
[ 33.005] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 33.074] (II) Module fb: vendor="X.Org Foundation"
[ 33.074] compiled for 1.11.4, module version = 1.0.0
[ 33.074] ABI class: X.Org ANSI C Emulation, version 0.4
[ 33.074] (II) Loading sub module "dri2"
[ 33.074] (II) LoadModule: "dri2"
[ 33.074] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 33.074] (II) Module dri2: vendor="X.Org Foundation"
[ 33.074] compiled for 1.11.4, module version = 1.2.0
[ 33.074] ABI class: X.Org Server Extension, version 6.0
[ 33.074] (==) Depth 24 pixmap format is 32 bpp
[ 33.074] (II) intel(0): [DRI2] Setup complete
[ 33.074] (II) intel(0): [DRI2] DRI driver: i965
[ 33.074] (II) intel(0): Allocated new frame buffer 1472x900 stride
6144, tiled
[ 33.130] (II) UXA(0): Driver registered support for the following
operations:
[ 33.130] (II) solid
[ 33.130] (II) copy
[ 33.130] (II) composite (RENDER acceleration)
[ 33.130] (II) put_image
[ 33.130] (II) get_image
[ 33.130] (==) intel(0): Backing store disabled
[ 33.130] (==) intel(0): Silken mouse enabled
[ 33.130] (II) intel(0): Initializing HW Cursor
[ 33.148] (II) intel(0): RandR 1.2 enabled, ignore the following
RandR disabled message.
[ 33.153] (==) intel(0): DPMS enabled
[ 33.153] (==) intel(0): Intel XvMC decoder enabled
[ 33.153] (II) intel(0): Set up textured video
[ 33.153] (II) intel(0): Set up overlay video
[ 33.153] (II) intel(0): [XvMC] i965_xvmc driver initialized.
[ 33.153] (II) intel(0): direct rendering: DRI2 Enabled
[ 33.153] (==) intel(0): hotplug detection: "enabled"
[ 33.154] (--) RandR disabled
[ 33.154] (II) Initializing built-in extension Generic Event Extension
[ 33.154] (II) Initializing built-in extension SHAPE
[ 33.154] (II) Initializing built-in extension MIT-SHM
[ 33.154] (II) Initializing built-in extension XInputExtension
[ 33.154] (II) Initializing built-in extension XTEST
[ 33.154] (II) Initializing built-in extension BIG-REQUESTS
[ 33.154] (II) Initializing built-in extension SYNC
[ 33.154] (II) Initializing built-in extension XKEYBOARD
[ 33.154] (II) Initializing built-in extension XC-MISC
[ 33.154] (II) Initializing built-in extension SECURITY
[ 33.154] (II) Initializing built-in extension XINERAMA
[ 33.154] (II) Initializing built-in extension XFIXES
[ 33.154] (II) Initializing built-in extension RENDER
[ 33.154] (II) Initializing built-in extension RANDR
[ 33.154] (II) Initializing built-in extension COMPOSITE
[ 33.154] (II) Initializing built-in extension DAMAGE
[ 33.154] (II) SELinux: Disabled on system
[ 33.947] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 33.947] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 33.947] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 33.947] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 33.947] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 33.947] (II) AIGLX: Loaded and initialized i965
[ 33.947] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 33.947] (II) intel(0): Setting screen physical size to 381 x 238
[ 35.259] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 35.259] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 35.259] (II) LoadModule: "evdev"
[ 35.259] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 35.278] (II) Module evdev: vendor="X.Org Foundation"
[ 35.278] compiled for 1.11.4, module version = 2.7.0
[ 35.278] Module class: X.Org XInput Driver
[ 35.278] ABI class: X.Org XInput driver, version 13.0
[ 35.278] (II) Using input driver 'evdev' for 'Video Bus'
[ 35.278] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 35.278] (**) Video Bus: always reports core events
[ 35.278] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 35.278] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 35.278] (--) evdev: Video Bus: Found keys
[ 35.278] (II) evdev: Video Bus: Configuring as keyboard
[ 35.278] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input4/event4"
[ 35.278] (II) XINPUT: Adding extended input device "Video Bus"
(type: KEYBOARD, id 6)
[ 35.278] (**) Option "xkb_rules" "evdev"
[ 35.278] (**) Option "xkb_model" "pc105"
[ 35.278] (**) Option "xkb_layout" "latam"
[ 35.279] (**) Option "xkb_options" "lv3:ralt_switch"
[ 35.448] (II) config/udev: Adding input device Power Button
(/dev/input/event2)
[ 35.448] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 35.448] (II) Using input driver 'evdev' for 'Power Button'
[ 35.448] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 35.448] (**) Power Button: always reports core events
[ 35.448] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 35.448] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 35.448] (--) evdev: Power Button: Found keys
[ 35.448] (II) evdev: Power Button: Configuring as keyboard
[ 35.448] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 35.448] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD, id 7)
[ 35.448] (**) Option "xkb_rules" "evdev"
[ 35.448] (**) Option "xkb_model" "pc105"
[ 35.448] (**) Option "xkb_layout" "latam"
[ 35.448] (**) Option "xkb_options" "lv3:ralt_switch"
[ 35.448] (II) config/udev: Adding input device Lid Switch
(/dev/input/event1)
[ 35.448] (II) No input driver specified, ignoring this device.
[ 35.448] (II) This device may have been added with another device file.
[ 35.449] (II) config/udev: Adding input device Sleep Button
(/dev/input/event3)
[ 35.449] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 35.449] (II) Using input driver 'evdev' for 'Sleep Button'
[ 35.449] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 35.449] (**) Sleep Button: always reports core events
[ 35.449] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 35.449] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 35.449] (--) evdev: Sleep Button: Found keys
[ 35.449] (II) evdev: Sleep Button: Configuring as keyboard
[ 35.449] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 35.449] (II) XINPUT: Adding extended input device "Sleep Button"
(type: KEYBOARD, id 8)
[ 35.449] (**) Option "xkb_rules" "evdev"
[ 35.449] (**) Option "xkb_model" "pc105"
[ 35.449] (**) Option "xkb_layout" "latam"
[ 35.449] (**) Option "xkb_options" "lv3:ralt_switch"
[ 35.450] (II) config/udev: Adding input device Broadcom Corp
(/dev/input/event5)
[ 35.450] (**) Broadcom Corp: Applying InputClass "evdev keyboard catchall"
[ 35.450] (II) Using input driver 'evdev' for 'Broadcom Corp'
[ 35.450] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 35.450] (**) Broadcom Corp: always reports core events
[ 35.450] (**) evdev: Broadcom Corp: Device: "/dev/input/event5"
[ 35.450] (--) evdev: Broadcom Corp: Vendor 0xa5c Product 0x4502
[ 35.450] (--) evdev: Broadcom Corp: Found keys
[ 35.450] (II) evdev: Broadcom Corp: Configuring as keyboard
[ 35.450] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input5/event5"
[ 35.450] (II) XINPUT: Adding extended input device "Broadcom Corp"
(type: KEYBOARD, id 9)
[ 35.450] (**) Option "xkb_rules" "evdev"
[ 35.450] (**) Option "xkb_model" "pc105"
[ 35.450] (**) Option "xkb_layout" "latam"
[ 35.450] (**) Option "xkb_options" "lv3:ralt_switch"
[ 35.451] (II) config/udev: Adding input device Broadcom Corp
(/dev/input/event6)
[ 35.451] (**) Broadcom Corp: Applying InputClass "evdev pointer catchall"
[ 35.451] (II) Using input driver 'evdev' for 'Broadcom Corp'
[ 35.451] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 35.451] (**) Broadcom Corp: always reports core events
[ 35.451] (**) evdev: Broadcom Corp: Device: "/dev/input/event6"
[ 35.451] (--) evdev: Broadcom Corp: Vendor 0xa5c Product 0x4503
[ 35.451] (--) evdev: Broadcom Corp: Found 3 mouse buttons
[ 35.451] (--) evdev: Broadcom Corp: Found relative axes
[ 35.451] (--) evdev: Broadcom Corp: Found x and y relative axes
[ 35.451] (II) evdev: Broadcom Corp: Configuring as mouse
[ 35.451] (**) evdev: Broadcom Corp: YAxisMapping: buttons 4 and 5
[ 35.451] (**) evdev: Broadcom Corp: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 35.451] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input6/event6"
[ 35.451] (II) XINPUT: Adding extended input device "Broadcom Corp"
(type: MOUSE, id 10)
[ 35.451] (II) evdev: Broadcom Corp: initialized for relative axes.
[ 35.451] (**) Broadcom Corp: (accel) keeping acceleration scheme 1
[ 35.451] (**) Broadcom Corp: (accel) acceleration profile 0
[ 35.451] (**) Broadcom Corp: (accel) acceleration factor: 2.000
[ 35.451] (**) Broadcom Corp: (accel) acceleration threshold: 4
[ 35.451] (II) config/udev: Adding input device Broadcom Corp
(/dev/input/mouse0)
[ 35.451] (II) No input driver specified, ignoring this device.
[ 35.451] (II) This device may have been added with another device file.
[ 35.452] (II) config/udev: Adding input device HDA Digital PCBeep
(/dev/input/event11)
[ 35.452] (II) No input driver specified, ignoring this device.
[ 35.452] (II) This device may have been added with another device file.
[ 35.452] (II) config/udev: Adding input device HDA Intel Mic
(/dev/input/event12)
[ 35.452] (II) No input driver specified, ignoring this device.
[ 35.452] (II) This device may have been added with another device file.
[ 35.452] (II) config/udev: Adding input device HDA Intel Headphone
(/dev/input/event13)
[ 35.452] (II) No input driver specified, ignoring this device.
[ 35.452] (II) This device may have been added with another device file.
[ 35.453] (II) config/udev: Adding input device HDA Intel Headphone
(/dev/input/event14)
[ 35.453] (II) No input driver specified, ignoring this device.
[ 35.453] (II) This device may have been added with another device file.
[ 35.453] (II) config/udev: Adding input device Laptop Integrated
Webcam (/dev/input/event15)
[ 35.453] (**) Laptop Integrated Webcam: Applying InputClass "evdev
keyboard catchall"
[ 35.453] (II) Using input driver 'evdev' for 'Laptop Integrated Webcam'
[ 35.453] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 35.453] (**) Laptop Integrated Webcam: always reports core events
[ 35.453] (**) evdev: Laptop Integrated Webcam: Device: "/dev/input/event15"
[ 35.453] (--) evdev: Laptop Integrated Webcam: Vendor 0x5a9 Product 0x2640
[ 35.453] (--) evdev: Laptop Integrated Webcam: Found keys
[ 35.453] (II) evdev: Laptop Integrated Webcam: Configuring as keyboard
[ 35.453] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input15/event15"
[ 35.453] (II) XINPUT: Adding extended input device "Laptop
Integrated Webcam" (type: KEYBOARD, id 11)
[ 35.453] (**) Option "xkb_rules" "evdev"
[ 35.453] (**) Option "xkb_model" "pc105"
[ 35.453] (**) Option "xkb_layout" "latam"
[ 35.453] (**) Option "xkb_options" "lv3:ralt_switch"
[ 35.454] (II) config/udev: Adding input device AT Translated Set 2
keyboard (/dev/input/event0)
[ 35.454] (**) AT Translated Set 2 keyboard: Applying InputClass
"evdev keyboard catchall"
[ 35.454] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 35.454] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 35.454] (**) AT Translated Set 2 keyboard: always reports core events
[ 35.454] (**) evdev: AT Translated Set 2 keyboard: Device:
"/dev/input/event0"
[ 35.454] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 35.454] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 35.454] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 35.454] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 35.454] (II) XINPUT: Adding extended input device "AT Translated
Set 2 keyboard" (type: KEYBOARD, id 12)
[ 35.454] (**) Option "xkb_rules" "evdev"
[ 35.454] (**) Option "xkb_model" "pc105"
[ 35.454] (**) Option "xkb_layout" "latam"
[ 35.454] (**) Option "xkb_options" "lv3:ralt_switch"
[ 35.455] (II) config/udev: Adding input device AlpsPS/2 ALPS
GlidePoint (/dev/input/event10)
[ 35.455] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev
touchpad catchall"
[ 35.455] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass
"touchpad catchall"
[ 35.455] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass
"Default clickpad buttons"
[ 35.455] (II) LoadModule: "synaptics"
[ 35.455] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 35.623] (II) Module synaptics: vendor="X.Org Foundation"
[ 35.623] compiled for 1.11.4, module version = 1.5.99
[ 35.623] Module class: X.Org XInput Driver
[ 35.623] ABI class: X.Org XInput driver, version 13.0
[ 35.623] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[ 35.623] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 35.623] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 35.623] (**) Option "Device" "/dev/input/event10"
[ 35.632] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
[ 35.632] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
[ 35.632] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[ 35.632] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not
report finger width.
[ 35.632] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left
right scroll-buttons
[ 35.632] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[ 35.632] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger
width range. defaulting to 0 - 15
[ 35.632] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 35.632] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 35.660] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio1/input/input10/event10"
[ 35.660] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS
GlidePoint" (type: TOUCHPAD, id 13)
[ 35.660] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel)
MinSpeed is now constant deceleration 2.5
[ 35.660] (**) synaptics: AlpsPS/2 ALPS GlidePoint: MaxSpeed is now 1.75
[ 35.660] (**) synaptics: AlpsPS/2 ALPS GlidePoint: AccelFactor is now 0.156
[ 35.660] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping
acceleration scheme 1
[ 35.660] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[ 35.660] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[ 35.660] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[ 35.660] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 35.661] (II) config/udev: Adding input device AlpsPS/2 ALPS
GlidePoint (/dev/input/mouse2)
[ 35.661] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from
InputClass "touchpad ignore duplicates"
[ 35.661] (II) config/udev: Adding input device PS/2 Mouse
(/dev/input/event9)
[ 35.661] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
[ 35.661] (II) Using input driver 'evdev' for 'PS/2 Mouse'
[ 35.661] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 35.661] (**) PS/2 Mouse: always reports core events
[ 35.661] (**) evdev: PS/2 Mouse: Device: "/dev/input/event9"
[ 35.661] (--) evdev: PS/2 Mouse: Vendor 0x2 Product 0x8
[ 35.661] (--) evdev: PS/2 Mouse: Found 3 mouse buttons
[ 35.661] (--) evdev: PS/2 Mouse: Found relative axes
[ 35.661] (--) evdev: PS/2 Mouse: Found x and y relative axes
[ 35.661] (II) evdev: PS/2 Mouse: Configuring as mouse
[ 35.661] (**) evdev: PS/2 Mouse: YAxisMapping: buttons 4 and 5
[ 35.661] (**) evdev: PS/2 Mouse: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 35.661] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[ 35.661] (II) XINPUT: Adding extended input device "PS/2 Mouse"
(type: MOUSE, id 14)
[ 35.661] (II) evdev: PS/2 Mouse: initialized for relative axes.
[ 35.661] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
[ 35.661] (**) PS/2 Mouse: (accel) acceleration profile 0
[ 35.661] (**) PS/2 Mouse: (accel) acceleration factor: 2.000
[ 35.661] (**) PS/2 Mouse: (accel) acceleration threshold: 4
[ 35.662] (II) config/udev: Adding input device PS/2 Mouse
(/dev/input/mouse1)
[ 35.662] (II) No input driver specified, ignoring this device.
[ 35.662] (II) This device may have been added with another device file.
[ 35.662] (II) config/udev: Adding input device PC Speaker
(/dev/input/event7)
[ 35.662] (II) No input driver specified, ignoring this device.
[ 35.662] (II) This device may have been added with another device file.
[ 35.663] (II) config/udev: Adding input device Dell WMI hotkeys
(/dev/input/event8)
[ 35.663] (**) Dell WMI hotkeys: Applying InputClass "evdev
keyboard catchall"
[ 35.663] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 35.663] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 35.663] (**) Dell WMI hotkeys: always reports core events
[ 35.663] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event8"
[ 35.663] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[ 35.663] (--) evdev: Dell WMI hotkeys: Found keys
[ 35.663] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[ 35.663] (**) Option "config_info"
"udev:/sys/devices/virtual/input/input8/event8"
[ 35.663] (II) XINPUT: Adding extended input device "Dell WMI
hotkeys" (type: KEYBOARD, id 15)
[ 35.663] (**) Option "xkb_rules" "evdev"
[ 35.663] (**) Option "xkb_model" "pc105"
[ 35.663] (**) Option "xkb_layout" "latam"
[ 35.663] (**) Option "xkb_options" "lv3:ralt_switch"
[ 111.581] (II) intel(0): EDID vendor "AUO", prod id 5191
[ 111.581] (II) intel(0): Printing DDC gathered Modelines:
[ 111.581] (II) intel(0): Modeline "1440x900"x0.0 108.20 1440 1504
1536 1972 900 903 906 914 -hsync -vsync (54.9 kHz)
[ 169.846] (II) intel(0): EDID vendor "AUO", prod id 5191
[ 169.846] (II) intel(0): Printing DDC gathered Modelines:
[ 169.847] (II) intel(0): Modeline "1440x900"x0.0 108.20 1440 1504
1536 1972 900 903 906 914 -hsync -vsync (54.9 kHz)
--
Jaime Alberto Silva Colorado
More information about the pkg-multimedia-maintainers
mailing list