[Pkg-net-snmp-devel] Bug#788228: snmpd: Wrong label in ifDescr
Michael Schwartzkopff
ms at sys4.de
Tue Jun 9 15:22:11 UTC 2015
Package: snmpd
Version: 5.7.2.1+dfsg-1
Severity: important
Hi,
in my system all infaces are labeled as "Intel Corporation 82540EM Gigabit Ethernet Controller" in the ifDescr entries if ifTable. It should be eth0, eth1, ff.
Greetings,
Michael Schwartzkopff.
-- System Information:
Debian Release: 8.0
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.16.0-4-amd64 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages snmpd depends on:
ii adduser 3.113+nmu3
ii debconf [debconf-2.0] 1.5.56
ii libc6 2.19-18
ii libsnmp-base 5.7.2.1+dfsg-1
ii libsnmp30 5.7.2.1+dfsg-1
ii lsb-base 4.1+Debian13+nmu1
snmpd recommends no packages.
Versions of packages snmpd suggests:
pn snmptrapd <none>
-- Configuration Files:
/etc/default/snmpd changed:
export MIBS=
SNMPDRUN=yes
SNMPDOPTS='-Lsd -Lf /dev/null -u snmp -g adm -I -smux,mteTrigger,mteTriggerConf -p /run/snmpd.pid'
/etc/snmp/snmpd.conf changed:
agentAddress udp:161,udp6:[::1]:161
# system + hrSystem groups only
view systemonly included .1.3.6.1.2.1.1
view systemonly included .1.3.6.1.2.1.25.1
# Full access from the local host
# Default access to basic system info
rocommunity public default
# rocommunity6 is for IPv6
rocommunity6 public default
# Full access from an example network
# Adjust this network address to match your local
# settings, change the community string,
# and check the 'agentAddress' setting above
# Full read-only access for SNMPv3
rouser authOnlyUser
# Full write access for encrypted requests
# Remember to activate the 'createUser' lines above
sysLocation DE;Essen;Antonienallee 1;Hauptgeb.;1;2;4
sysContact noc at linuxhotel.de (Tel: +49 211 12345) <noc at linuxhotel.de>
# Application + End-to-End layers
sysServices 72
# At least one 'mountd' process
# No more than 4 'ntalkd' processes - 0 is OK
# At least one 'sendmail' process, but no more than 10
proc exim4
# 10MBs required on root disk, 5% free on /var, 10% free on all other disks
includeAllDisks 10%
load 12 10 5
# send SNMPv1 traps
trapsink localhost public
# send SNMPv2c traps
# send SNMPv2c INFORMs
# Remember to activate the 'createUser' lines above
iquerySecName internalUser
rouser internalUser
# generate traps on UCD error conditions
defaultMonitors yes
# generate traps on linkUp/Down
linkUpDownNotifications yes
extend test1 /bin/echo Hello, world!
extend-sh test2 echo Hello, world! ; echo Hi there ; exit 35
# Run as an AgentX master agent
master agentx
# Listen for network connections (from localhost)
# rather than the default named socket /var/agentx/master
logmatch marker /var/log/syslog 60 marker
-- debconf information:
snmpd/upgradefrom521:
More information about the Pkg-net-snmp-devel
mailing list