Bug#707783: FATAL: Error inserting bbswitch (/lib/modules/3.2.0-0.bpo.4-amd64/updates/dkms/bbswitch.ko): No such device

Mathieu Malaterre malat at debian.org
Sun May 12 17:14:31 UTC 2013


On Sun, May 12, 2013 at 2:33 AM, Vincent Cheng <vincentc1208 at gmail.com> wrote:
> Can you also attach your dmesg output as well?

Attached. Thanks.

> Note that I haven't tested my bbswitch/bumblebee/primus packages in a
> squeeze+backports environment, so I wouldn't know if there are any
> incompatibilities with squeeze and my packages.

Ok. I understand.

I have also attached the output of: ./get-acpi-info.sh

I could not get the ACPI stuff working:

$ sudo make load
rmmod acpi_dump_info
ERROR: Module acpi_dump_info does not exist in /proc/modules
make: [load] Error 1 (ignored)
insmod acpi_dump_info.ko
insmod: error inserting 'acpi_dump_info.ko': -1 Cannot allocate memory
make: *** [load] Error 1
-------------- next part --------------
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-0.bpo.4-amd64 (debian-kernel at lists.debian.org) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Debian 3.2.41-2~bpo60+1
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-0.bpo.4-amd64 root=UUID=0b17f6ae-4025-41be-ab21-1f6e2472ad73 ro quiet
[    0.000000] Disabled fast string operations
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[    0.000000]  BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bac8f000 (usable)
[    0.000000]  BIOS-e820: 00000000bac8f000 - 00000000bacac000 (reserved)
[    0.000000]  BIOS-e820: 00000000bacac000 - 00000000bacb8000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bacb8000 - 00000000badcf000 (reserved)
[    0.000000]  BIOS-e820: 00000000badcf000 - 00000000badd0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000badd0000 - 00000000badfb000 (reserved)
[    0.000000]  BIOS-e820: 00000000badfb000 - 00000000badfd000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000badfd000 - 00000000badff000 (reserved)
[    0.000000]  BIOS-e820: 00000000badff000 - 00000000bae02000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bae02000 - 00000000bae0a000 (reserved)
[    0.000000]  BIOS-e820: 00000000bae0a000 - 00000000bae1b000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bae1b000 - 00000000baf18000 (reserved)
[    0.000000]  BIOS-e820: 00000000baf18000 - 00000000baf1c000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000baf1c000 - 00000000baf1f000 (reserved)
[    0.000000]  BIOS-e820: 00000000baf1f000 - 00000000baf9f000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000baf9f000 - 00000000bafff000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bafff000 - 00000000bb000000 (usable)
[    0.000000]  BIOS-e820: 00000000bb000000 - 00000000bfa00000 (reserved)
[    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed08000 - 00000000fed09000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 00000001be9ff000 (usable)
[    0.000000]  BIOS-e820: 00000001be9ff000 - 00000001bfe00000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Dell Inc.          Dell System Vostro 3750/0VP036, BIOS A14 09/26/2012
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x1be9ff max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 0BC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0BB000000 mask FFF000000 uncachable
[    0.000000]   5 base 100000000 mask F80000000 write-back
[    0.000000]   6 base 180000000 mask FC0000000 write-back
[    0.000000]   7 base 1BFE00000 mask FFFE00000 uncachable
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] init_memory_mapping: 0000000000000000-00000000bb000000
[    0.000000]  0000000000 - 00bb000000 page 2M
[    0.000000] kernel direct mapping tables up to bb000000 @ 1fffc000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-00000001be9ff000
[    0.000000]  0100000000 - 01be800000 page 2M
[    0.000000]  01be800000 - 01be9ff000 page 4k
[    0.000000] kernel direct mapping tables up to 1be9ff000 @ bac8a000-bac8f000
[    0.000000] RAMDISK: 3754e000 - 37ff0000
[    0.000000] ACPI: RSDP 00000000000f00e0 00024 (v02 DELL  )
[    0.000000] ACPI: XSDT 00000000baffe120 00094 (v01 DELL    QA09    00000002 LOHR 00000002)
[    0.000000] ACPI: FACP 00000000bafed000 000F4 (v03 DELL    QA09    00000002 PTL  00000002)
[    0.000000] ACPI: DSDT 00000000baff0000 09E27 (v02 DELL    SNB-CPT 00000000 INTL 20061109)
[    0.000000] ACPI: FACS 00000000baf40000 00040
[    0.000000] ACPI: SLIC 00000000baffd000 00176 (v01 DELL    QA09    00000002 LOHR 00000001)
[    0.000000] ACPI: BOOT 00000000baffc000 00028 (v01                 00000001 PTL  00000001)
[    0.000000] ACPI: SSDT 00000000baffa000 01068 (v01 DELL   PtidDevc 00001000 INTL 20061109)
[    0.000000] ACPI: ASF! 00000000bafef000 000A5 (v32 DELL    QA09    00000002 PTL  00000002)
[    0.000000] ACPI: HPET 00000000bafec000 00038 (v01 DELL    QA09    00000002 PTL  00000002)
[    0.000000] ACPI: APIC 00000000bafeb000 00098 (v01 DELL    QA09    00000002 PTL  00000002)
[    0.000000] ACPI: MCFG 00000000bafea000 0003C (v01 DELL    QA09    00000002 PTL  00000002)
[    0.000000] ACPI: SSDT 00000000bafe9000 00F3D (v01 NvORef NvOptTbl 00001000 INTL 20061109)
[    0.000000] ACPI: SSDT 00000000bafe8000 0090C (v01  PmRef  Cpu0Ist 00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 00000000bafe7000 00996 (v01  PmRef    CpuPm 00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 00000000bafe6000 0003E (v01 DELL    QA09    00000002 PTL  00000002)
[    0.000000] ACPI: UEFI 00000000bafe5000 00042 (v01 PTL      COMBUF 00000001 PTL  00000001)
[    0.000000] ACPI: UEFI 00000000bafe4000 00256 (v01 DELL    QA09    00000002 PTL  00000002)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-00000001be9ff000
[    0.000000] Initmem setup node 0 0000000000000000-00000001be9ff000
[    0.000000]   NODE_DATA [00000001be9fa000 - 00000001be9fefff]
[    0.000000]  [ffffea0000000000-ffffea00061fffff] PMD -> [ffff8801b8000000-ffff8801bd3fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x001be9ff
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[4] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x000bac8f
[    0.000000]     0: 0x000bafff -> 0x000bb000
[    0.000000]     0: 0x00100000 -> 0x001be9ff
[    0.000000] On node 0 totalpages: 1545756
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 141 pages reserved
[    0.000000]   DMA zone: 3784 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 746696 pages, LIFO batch:31
[    0.000000]   Normal zone: 10675 pages used for memmap
[    0.000000]   Normal zone: 770124 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000bac8f000 - 00000000bacac000
[    0.000000] PM: Registered nosave memory: 00000000bacac000 - 00000000bacb8000
[    0.000000] PM: Registered nosave memory: 00000000bacb8000 - 00000000badcf000
[    0.000000] PM: Registered nosave memory: 00000000badcf000 - 00000000badd0000
[    0.000000] PM: Registered nosave memory: 00000000badd0000 - 00000000badfb000
[    0.000000] PM: Registered nosave memory: 00000000badfb000 - 00000000badfd000
[    0.000000] PM: Registered nosave memory: 00000000badfd000 - 00000000badff000
[    0.000000] PM: Registered nosave memory: 00000000badff000 - 00000000bae02000
[    0.000000] PM: Registered nosave memory: 00000000bae02000 - 00000000bae0a000
[    0.000000] PM: Registered nosave memory: 00000000bae0a000 - 00000000bae1b000
[    0.000000] PM: Registered nosave memory: 00000000bae1b000 - 00000000baf18000
[    0.000000] PM: Registered nosave memory: 00000000baf18000 - 00000000baf1c000
[    0.000000] PM: Registered nosave memory: 00000000baf1c000 - 00000000baf1f000
[    0.000000] PM: Registered nosave memory: 00000000baf1f000 - 00000000baf9f000
[    0.000000] PM: Registered nosave memory: 00000000baf9f000 - 00000000bafff000
[    0.000000] PM: Registered nosave memory: 00000000bb000000 - 00000000bfa00000
[    0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[    0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
[    0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
[    0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
[    0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
[    0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at bfa00000 (gap: bfa00000:38600000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff8801be600000 s82880 r8192 d23616 u262144
[    0.000000] pcpu-alloc: s82880 r8192 d23616 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1520604
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-0.bpo.4-amd64 root=UUID=0b17f6ae-4025-41be-ab21-1f6e2472ad73 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 6010020k/7317500k available (3531k kernel code, 1134476k absent, 173004k reserved, 3208k data, 616k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 1993.833 MHz processor.
[    0.000006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3987.66 BogoMIPS (lpj=7975332)
[    0.000017] pid_max: default: 32768 minimum: 301
[    0.000118] Security Framework initialized
[    0.000127] AppArmor: AppArmor disabled by boot time parameter
[    0.001439] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.006251] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.008291] Mount-cache hash table entries: 256
[    0.008588] Initializing cgroup subsys cpuacct
[    0.008601] Initializing cgroup subsys memory
[    0.008637] Initializing cgroup subsys devices
[    0.008643] Initializing cgroup subsys freezer
[    0.008647] Initializing cgroup subsys net_cls
[    0.008652] Initializing cgroup subsys blkio
[    0.008672] Initializing cgroup subsys perf_event
[    0.008744] Disabled fast string operations
[    0.008749] CPU: Physical Processor ID: 0
[    0.008752] CPU: Processor Core ID: 0
[    0.008765] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.008767] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.008775] mce: CPU supports 9 MCE banks
[    0.008805] CPU0: Thermal monitoring handled by SMI
[    0.008821] using mwait in idle threads.
[    0.012184] ACPI: Core revision 20110623
[    0.039260] x2apic not enabled, IRQ remapping init failed
[    0.039735] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.079381] CPU0: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz stepping 07
[    0.185977] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[    0.185990] PEBS disabled due to CPU errata.
[    0.185997] ... version:                3
[    0.186000] ... bit width:              48
[    0.186004] ... generic registers:      4
[    0.186007] ... value mask:             0000ffffffffffff
[    0.186012] ... max period:             000000007fffffff
[    0.186016] ... fixed-purpose events:   3
[    0.186019] ... event mask:             000000070000000f
[    0.187046] NMI watchdog enabled, takes one hw-pmu counter.
[    0.187327] Booting Node   0, Processors  #1
[    0.187333] smpboot cpu 1: start_ip = 98000
[    0.277865] Disabled fast string operations
[    0.277885] CPU1: Thermal monitoring handled by SMI
[    0.298018] NMI watchdog enabled, takes one hw-pmu counter.
[    0.298275]  #2
[    0.298279] smpboot cpu 2: start_ip = 98000
[    0.581459] Disabled fast string operations
[    0.581478] CPU2: Thermal monitoring handled by SMI
[    0.601540] NMI watchdog enabled, takes one hw-pmu counter.
[    0.601798]  #3
[    0.601802] smpboot cpu 3: start_ip = 98000
[    0.689315] Disabled fast string operations
[    0.689332] CPU3: Thermal monitoring handled by SMI
[    0.709382] NMI watchdog enabled, takes one hw-pmu counter.
[    0.709632]  #4
[    0.709636] smpboot cpu 4: start_ip = 98000
[    0.797171] Disabled fast string operations
[    0.797190] CPU4: Thermal monitoring handled by SMI
[    0.817309] NMI watchdog enabled, takes one hw-pmu counter.
[    0.817557]  #5
[    0.817560] smpboot cpu 5: start_ip = 98000
[    0.905027] Disabled fast string operations
[    0.905045] CPU5: Thermal monitoring handled by SMI
[    0.925136] NMI watchdog enabled, takes one hw-pmu counter.
[    0.925383]  #6
[    0.925386] smpboot cpu 6: start_ip = 98000
[    1.012883] Disabled fast string operations
[    1.012902] CPU6: Thermal monitoring handled by SMI
[    1.032958] NMI watchdog enabled, takes one hw-pmu counter.
[    1.033198]  #7 Ok.
[    1.033202] smpboot cpu 7: start_ip = 98000
[    1.120739] Disabled fast string operations
[    1.120757] CPU7: Thermal monitoring handled by SMI
[    1.140875] NMI watchdog enabled, takes one hw-pmu counter.
[    1.140926] Brought up 8 CPUs
[    1.140932] Total of 8 processors activated (31896.09 BogoMIPS).
[    1.150153] devtmpfs: initialized
[    1.158202] PM: Registering ACPI NVS region at bacac000 (49152 bytes)
[    1.158213] PM: Registering ACPI NVS region at badcf000 (4096 bytes)
[    1.158218] PM: Registering ACPI NVS region at badfb000 (8192 bytes)
[    1.158224] PM: Registering ACPI NVS region at badff000 (12288 bytes)
[    1.158230] PM: Registering ACPI NVS region at bae0a000 (69632 bytes)
[    1.158241] PM: Registering ACPI NVS region at baf18000 (16384 bytes)
[    1.158247] PM: Registering ACPI NVS region at baf1f000 (524288 bytes)
[    1.158689] print_constraints: dummy: 
[    1.158854] NET: Registered protocol family 16
[    1.159132] ACPI: bus type pci registered
[    1.159354] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    1.159362] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    1.177586] PCI: Using configuration type 1 for base access
[    1.180405] bio: create slab <bio-0> at 0
[    1.180658] ACPI: Added _OSI(Module Device)
[    1.180663] ACPI: Added _OSI(Processor Device)
[    1.180668] ACPI: Added _OSI(3.0 _SCP Extensions)
[    1.180673] ACPI: Added _OSI(Processor Aggregator Device)
[    1.184326] ACPI: EC: Look up EC in DSDT
[    1.187899] ACPI: Executed 2 blocks of module-level executable AML code
[    1.216688] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    1.218333] ACPI: SSDT 00000000bae06718 0067C (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
[    1.219314] ACPI: Dynamic OEM Table Load:
[    1.219321] ACPI: SSDT           (null) 0067C (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
[    1.229387] ACPI: SSDT 00000000bae07a98 00303 (v01  PmRef    ApIst 00003000 INTL 20061109)
[    1.230475] ACPI: Dynamic OEM Table Load:
[    1.230482] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20061109)
[    1.240892] ACPI: SSDT 00000000bae05d98 00119 (v01  PmRef    ApCst 00003000 INTL 20061109)
[    1.241840] ACPI: Dynamic OEM Table Load:
[    1.241845] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20061109)
[    1.260280] ACPI: Interpreter enabled
[    1.260290] ACPI: (supports S0 S3 S4 S5)
[    1.260355] ACPI: Using IOAPIC for interrupt routing
[    1.275233] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    1.275656] ACPI: No dock devices found.
[    1.275660] HEST: Table not found.
[    1.275668] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.276809] \_SB_.PCI0:_OSC invalid UUID
[    1.276814] _OSC request data:1 8 1f 
[    1.276824] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    1.278758] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    1.278764] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    1.278771] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    1.278780] pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xfeafffff]
[    1.278785] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[    1.278818] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
[    1.278918] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
[    1.279000] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    1.279056] pci 0000:00:02.0: [8086:0116] type 0 class 0x000300
[    1.279084] pci 0000:00:02.0: reg 10: [mem 0xf1400000-0xf17fffff 64bit]
[    1.279100] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[    1.279113] pci 0000:00:02.0: reg 20: [io  0x5000-0x503f]
[    1.279253] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[    1.279302] pci 0000:00:16.0: reg 10: [mem 0xf2b05000-0xf2b0500f 64bit]
[    1.279461] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.279544] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[    1.279588] pci 0000:00:1a.0: reg 10: [mem 0xf2b0a000-0xf2b0a3ff]
[    1.279778] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.279843] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[    1.279880] pci 0000:00:1b.0: reg 10: [mem 0xf2b00000-0xf2b03fff 64bit]
[    1.280049] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.280107] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[    1.280286] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.280351] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604
[    1.280538] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    1.280610] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
[    1.280790] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    1.280854] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604
[    1.281033] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    1.281108] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[    1.281152] pci 0000:00:1d.0: reg 10: [mem 0xf2b09000-0xf2b093ff]
[    1.281342] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.281400] pci 0000:00:1f.0: [8086:1c4b] type 0 class 0x000601
[    1.281646] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
[    1.281695] pci 0000:00:1f.2: reg 10: [io  0x5088-0x508f]
[    1.281716] pci 0000:00:1f.2: reg 14: [io  0x5094-0x5097]
[    1.281736] pci 0000:00:1f.2: reg 18: [io  0x5080-0x5087]
[    1.281757] pci 0000:00:1f.2: reg 1c: [io  0x5090-0x5093]
[    1.281778] pci 0000:00:1f.2: reg 20: [io  0x5060-0x507f]
[    1.281799] pci 0000:00:1f.2: reg 24: [mem 0xf2b08000-0xf2b087ff]
[    1.281921] pci 0000:00:1f.2: PME# supported from D3hot
[    1.281972] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[    1.282010] pci 0000:00:1f.3: reg 10: [mem 0xf2b04000-0xf2b040ff 64bit]
[    1.282063] pci 0000:00:1f.3: reg 20: [io  0xefa0-0xefbf]
[    1.282205] pci 0000:01:00.0: [10de:0df5] type 0 class 0x000300
[    1.282222] pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf0ffffff]
[    1.282241] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    1.282260] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    1.282274] pci 0000:01:00.0: reg 24: [io  0x4000-0x407f]
[    1.282288] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
[    1.288526] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    1.288534] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    1.288541] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf10fffff]
[    1.288550] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    1.288971] pci 0000:02:00.0: [8086:008a] type 0 class 0x000280
[    1.289332] pci 0000:02:00.0: reg 10: [mem 0xf2a00000-0xf2a01fff 64bit]
[    1.291127] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    1.296636] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    1.296650] pci 0000:00:1c.0:   bridge window [mem 0xf2a00000-0xf2afffff]
[    1.296811] pci 0000:03:00.0: [1033:0194] type 0 class 0x000c03
[    1.296856] pci 0000:03:00.0: reg 10: [mem 0xf2900000-0xf2901fff 64bit]
[    1.297081] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    1.297174] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[    1.297188] pci 0000:00:1c.2:   bridge window [mem 0xf2900000-0xf29fffff]
[    1.297341] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
[    1.297374] pci 0000:04:00.0: reg 10: [io  0x3000-0x30ff]
[    1.297432] pci 0000:04:00.0: reg 18: [mem 0xf1804000-0xf1804fff 64bit pref]
[    1.297470] pci 0000:04:00.0: reg 20: [mem 0xf1800000-0xf1803fff 64bit pref]
[    1.297623] pci 0000:04:00.0: supports D1 D2
[    1.297628] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.304512] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[    1.304521] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    1.304540] pci 0000:00:1c.4:   bridge window [mem 0xf1800000-0xf18fffff 64bit pref]
[    1.304645] pci 0000:00:1c.5: PCI bridge to [bus 05-09]
[    1.304655] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[    1.304667] pci 0000:00:1c.5:   bridge window [mem 0xf2100000-0xf28fffff]
[    1.304682] pci 0000:00:1c.5:   bridge window [mem 0xf1900000-0xf20fffff 64bit pref]
[    1.304737] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.305141] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    1.305268] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    1.305384] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[    1.305501] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[    1.305635] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[    1.305868] \_SB_.PCI0:_OSC invalid UUID
[    1.305872] _OSC request data:1 1f 1f 
[    1.305882]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    1.305989] \_SB_.PCI0:_OSC invalid UUID
[    1.305992] _OSC request data:1 0 1d 
[    1.306002]  pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[    1.306006] ACPI _OSC control for PCIe not granted, disabling ASPM
[    1.315556] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    1.315704] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[    1.315844] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    1.315979] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[    1.316115] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.316253] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.316390] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    1.316538] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    1.316816] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.316839] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    1.316847] vgaarb: loaded
[    1.316851] vgaarb: bridge control possible 0000:01:00.0
[    1.316855] vgaarb: no bridge control possible 0000:00:02.0
[    1.316983] PCI: Using ACPI for IRQ routing
[    1.321031] PCI: pci_cache_line_size set to 64 bytes
[    1.321228] reserve RAM buffer: 000000000009d800 - 000000000009ffff 
[    1.321235] reserve RAM buffer: 00000000bac8f000 - 00000000bbffffff 
[    1.321243] reserve RAM buffer: 00000000bb000000 - 00000000bbffffff 
[    1.321249] reserve RAM buffer: 00000001be9ff000 - 00000001bfffffff 
[    1.321543] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.321558] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.323590] Switching to clocksource hpet
[    1.327529] pnp: PnP ACPI init
[    1.327576] ACPI: bus type pnp registered
[    1.328564] pnp 00:00: [bus 00-3e]
[    1.328571] pnp 00:00: [io  0x0000-0x0cf7 window]
[    1.328576] pnp 00:00: [io  0x0cf8-0x0cff]
[    1.328581] pnp 00:00: [io  0x0d00-0xffff window]
[    1.328587] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    1.328592] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    1.328597] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    1.328603] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    1.328608] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    1.328613] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    1.328618] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    1.328623] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    1.328628] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    1.328633] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    1.328638] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    1.328643] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    1.328648] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    1.328653] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    1.328659] pnp 00:00: [mem 0xbfa00000-0xfeafffff window]
[    1.328664] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    1.328786] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    1.328824] pnp 00:01: [io  0x0000-0x001f]
[    1.328829] pnp 00:01: [io  0x0081-0x0091]
[    1.328835] pnp 00:01: [io  0x0093-0x009f]
[    1.328840] pnp 00:01: [io  0x00c0-0x00df]
[    1.328845] pnp 00:01: [dma 4]
[    1.328912] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.329117] pnp 00:02: [mem 0xfed00000-0xfed003ff]
[    1.329187] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.329216] pnp 00:03: [io  0x00f0]
[    1.329232] pnp 00:03: [irq 13]
[    1.329299] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.329330] pnp 00:04: [io  0x002e-0x002f]
[    1.329334] pnp 00:04: [io  0x004e-0x004f]
[    1.329338] pnp 00:04: [io  0x0061]
[    1.329342] pnp 00:04: [io  0x0063]
[    1.329346] pnp 00:04: [io  0x0065]
[    1.329351] pnp 00:04: [io  0x0067]
[    1.329355] pnp 00:04: [io  0x0068]
[    1.329359] pnp 00:04: [io  0x006c]
[    1.329363] pnp 00:04: [io  0x0070]
[    1.329367] pnp 00:04: [io  0x0080]
[    1.329371] pnp 00:04: [io  0x0092]
[    1.329375] pnp 00:04: [io  0x00b2-0x00b3]
[    1.329379] pnp 00:04: [io  0x0680-0x069f]
[    1.329384] pnp 00:04: [io  0x1000-0x1003]
[    1.329388] pnp 00:04: [io  0x1004-0x1013]
[    1.329392] pnp 00:04: [io  0xffff]
[    1.329397] pnp 00:04: [io  0x0400-0x0453]
[    1.329401] pnp 00:04: [io  0x0458-0x047f]
[    1.329405] pnp 00:04: [io  0x0500-0x057f]
[    1.329410] pnp 00:04: [io  0x164e-0x164f]
[    1.329534] system 00:04: [io  0x0680-0x069f] has been reserved
[    1.329541] system 00:04: [io  0x1000-0x1003] has been reserved
[    1.329547] system 00:04: [io  0x1004-0x1013] has been reserved
[    1.329553] system 00:04: [io  0xffff] has been reserved
[    1.329559] system 00:04: [io  0x0400-0x0453] has been reserved
[    1.329565] system 00:04: [io  0x0458-0x047f] has been reserved
[    1.329571] system 00:04: [io  0x0500-0x057f] has been reserved
[    1.329578] system 00:04: [io  0x164e-0x164f] has been reserved
[    1.329584] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.329608] pnp 00:05: [io  0x0070-0x0077]
[    1.329619] pnp 00:05: [irq 8]
[    1.329684] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.329762] pnp 00:06: [io  0x0454-0x0457]
[    1.329869] system 00:06: [io  0x0454-0x0457] has been reserved
[    1.329876] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    1.329970] pnp 00:07: [io  0x0060]
[    1.329975] pnp 00:07: [io  0x0064]
[    1.329991] pnp 00:07: [irq 1]
[    1.330066] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.330148] pnp 00:08: [irq 12]
[    1.330219] pnp 00:08: Plug and Play ACPI device, IDs DLL04c6 PNP0f13 (active)
[    1.330528] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[    1.330533] pnp 00:09: [mem 0xfed10000-0xfed17fff]
[    1.330538] pnp 00:09: [mem 0xfed18000-0xfed18fff]
[    1.330543] pnp 00:09: [mem 0xfed19000-0xfed19fff]
[    1.330547] pnp 00:09: [mem 0xf8000000-0xfbffffff]
[    1.330552] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
[    1.330557] pnp 00:09: [mem 0xfed90000-0xfed93fff]
[    1.330562] pnp 00:09: [mem 0xfed45000-0xfed8ffff]
[    1.330566] pnp 00:09: [mem 0xff000000-0xffffffff]
[    1.330571] pnp 00:09: [mem 0xfee00000-0xfeefffff]
[    1.330575] pnp 00:09: [mem 0xfff00000-0xfff00fff]
[    1.330701] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.330708] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    1.330714] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.330721] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.330728] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[    1.330734] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.330741] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[    1.330747] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.330755] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    1.330762] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.330769] system 00:09: [mem 0xfff00000-0xfff00fff] has been reserved
[    1.330776] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.331112] pnp 00:0a: [irq 20]
[    1.331218] pnp 00:0a: Plug and Play ACPI device, IDs SMO8800 (active)
[    1.331613] pnp: PnP ACPI: found 11 devices
[    1.331617] ACPI: ACPI bus type pnp unregistered
[    1.341594] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[    1.341607] PCI: max bus depth: 1 pci_try_num: 2
[    1.341692] pci 0000:01:00.0: BAR 6: assigned [mem 0xf1000000-0xf107ffff pref]
[    1.341699] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    1.341705] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    1.341713] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf10fffff]
[    1.341721] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    1.341731] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    1.341743] pci 0000:00:1c.0:   bridge window [mem 0xf2a00000-0xf2afffff]
[    1.341762] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[    1.341774] pci 0000:00:1c.2:   bridge window [mem 0xf2900000-0xf29fffff]
[    1.341793] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[    1.341800] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    1.341817] pci 0000:00:1c.4:   bridge window [mem 0xf1800000-0xf18fffff 64bit pref]
[    1.341832] pci 0000:00:1c.5: PCI bridge to [bus 05-09]
[    1.341838] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[    1.341850] pci 0000:00:1c.5:   bridge window [mem 0xf2100000-0xf28fffff]
[    1.341860] pci 0000:00:1c.5:   bridge window [mem 0xf1900000-0xf20fffff 64bit pref]
[    1.341900] pci 0000:00:01.0: setting latency timer to 64
[    1.341917] pci 0000:00:1c.0: setting latency timer to 64
[    1.341942] pci 0000:00:1c.2: setting latency timer to 64
[    1.341960] pci 0000:00:1c.4: setting latency timer to 64
[    1.341985] pci 0000:00:1c.5: setting latency timer to 64
[    1.341994] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.341999] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.342005] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.342010] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
[    1.342015] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[    1.342021] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    1.342026] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf10fffff]
[    1.342031] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    1.342037] pci_bus 0000:02: resource 1 [mem 0xf2a00000-0xf2afffff]
[    1.342043] pci_bus 0000:03: resource 1 [mem 0xf2900000-0xf29fffff]
[    1.342048] pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
[    1.342053] pci_bus 0000:04: resource 2 [mem 0xf1800000-0xf18fffff 64bit pref]
[    1.342058] pci_bus 0000:05: resource 0 [io  0x2000-0x2fff]
[    1.342063] pci_bus 0000:05: resource 1 [mem 0xf2100000-0xf28fffff]
[    1.342068] pci_bus 0000:05: resource 2 [mem 0xf1900000-0xf20fffff 64bit pref]
[    1.342254] NET: Registered protocol family 2
[    1.342765] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    1.347587] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    1.351113] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.351433] TCP: Hash tables configured (established 524288 bind 65536)
[    1.351438] TCP reno registered
[    1.351471] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.351584] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.351948] NET: Registered protocol family 1
[    1.351983] pci 0000:00:02.0: Boot video device
[    1.352296] PCI: CLS 64 bytes, default 64
[    1.352395] Unpacking initramfs...
[    2.089506] Freeing initrd memory: 10888k freed
[    2.094806] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    2.094815] Placing 64MB software IO TLB between ffff8800b6c8a000 - ffff8800bac8a000
[    2.094821] software IO TLB at phys 0xb6c8a000 - 0xbac8a000
[    2.094850] Simple Boot Flag at 0x66 set to 0x1
[    2.096682] audit: initializing netlink socket (disabled)
[    2.096705] type=2000 audit(1368385383.668:1): initialized
[    2.132687] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    2.134111] VFS: Disk quotas dquot_6.5.2
[    2.134192] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.134371] msgmni has been set to 11759
[    2.134703] alg: No test for stdrng (krng)
[    2.134769] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    2.134776] io scheduler noop registered
[    2.134780] io scheduler deadline registered
[    2.134828] io scheduler cfq registered (default)
[    2.135015] pcieport 0000:00:01.0: setting latency timer to 64
[    2.135078] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    2.135630] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.135694] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.135698] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    2.136458] intel_idle: MWAIT substates: 0x21120
[    2.136462] intel_idle: v0.4 model 0x2A
[    2.136466] intel_idle: lapic_timer_reliable_states 0xffffffff
[    2.136562] ERST: Table is not found!
[    2.136565] GHES: HEST is not enabled!
[    2.136682] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.314742] Linux agpgart interface v0.103
[    2.314827] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[    2.314917] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    2.316303] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[    2.316423] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[    2.316568] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.321318] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.321323] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.321454] mousedev: PS/2 mouse device common for all mice
[    2.321491] rtc_cmos 00:05: RTC can wake from S4
[    2.321633] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    2.321679] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    2.322168] cpuidle: using governor ladder
[    2.322774] cpuidle: using governor menu
[    2.323311] TCP cubic registered
[    2.323628] NET: Registered protocol family 10
[    2.324991] Mobile IPv6
[    2.324997] NET: Registered protocol family 17
[    2.325008] Registering the dns_resolver key type
[    2.325773] PM: Hibernation image not present or could not be loaded.
[    2.325806] registered taskstats version 1
[    2.326479] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.327071] rtc_cmos 00:05: setting system clock to 2013-05-12 19:03:04 UTC (1368385384)
[    2.327304] Initializing network drop monitor service
[    2.330232] Freeing unused kernel memory: 616k freed
[    2.330541] Write protecting the kernel read-only data: 6144k
[    2.334149] Freeing unused kernel memory: 548k freed
[    2.339970] Freeing unused kernel memory: 712k freed
[    2.355564] udev[78]: starting version 164
[    2.367687] thermal LNXTHERM:00: registered as thermal_zone0
[    2.367691] ACPI: Thermal Zone [TZ00] (56 C)
[    2.368009] thermal LNXTHERM:01: registered as thermal_zone1
[    2.368013] ACPI: Thermal Zone [TZ01] (56 C)
[    2.368239] usbcore: registered new interface driver usbfs
[    2.368270] usbcore: registered new interface driver hub
[    2.370291] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.370365] r8169 0000:04:00.0: setting latency timer to 64
[    2.370378] usbcore: registered new device driver usb
[    2.370455] r8169 0000:04:00.0: irq 41 for MSI/MSI-X
[    2.371035] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.371057] r8169 0000:04:00.0: eth0: RTL8168e/8111e at 0xffffc90000c3c000, 14:fe:b5:b3:f9:4a, XID 0c200000 IRQ 41
[    2.371061] r8169 0000:04:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.371075] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    2.371081] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    2.371116] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.371162] ehci_hcd 0000:00:1a.0: debug port 2
[    2.372192] SCSI subsystem initialized
[    2.375056] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    2.375086] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf2b0a000
[    2.375908] libata version 3.00 loaded.
[    2.390225] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.390289] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.390296] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.390302] usb usb1: Product: EHCI Host Controller
[    2.390315] usb usb1: Manufacturer: Linux 3.2.0-0.bpo.4-amd64 ehci_hcd
[    2.390317] usb usb1: SerialNumber: 0000:00:1a.0
[    2.390522] hub 1-0:1.0: USB hub found
[    2.390527] hub 1-0:1.0: 2 ports detected
[    2.390636] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.390639] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    2.390648] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.390680] ehci_hcd 0000:00:1d.0: debug port 2
[    2.394557] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    2.394579] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf2b09000
[    2.394956] xhci_hcd 0000:03:00.0: setting latency timer to 64
[    2.394962] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    2.394972] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[    2.395191] xhci_hcd 0000:03:00.0: irq 18, io mem 0xf2900000
[    2.395271] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
[    2.395277] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
[    2.395282] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
[    2.395287] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[    2.395292] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
[    2.395297] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X
[    2.395302] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X
[    2.395307] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X
[    2.395466] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    2.395469] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.395471] usb usb3: Product: xHCI Host Controller
[    2.395473] usb usb3: Manufacturer: Linux 3.2.0-0.bpo.4-amd64 xhci_hcd
[    2.395475] usb usb3: SerialNumber: 0000:03:00.0
[    2.395573] xHCI xhci_add_endpoint called for root hub
[    2.395575] xHCI xhci_check_bandwidth called for root hub
[    2.395608] hub 3-0:1.0: USB hub found
[    2.395616] hub 3-0:1.0: 2 ports detected
[    2.395680] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    2.395686] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[    2.398478] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    2.398481] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.398483] usb usb4: Product: xHCI Host Controller
[    2.398485] usb usb4: Manufacturer: Linux 3.2.0-0.bpo.4-amd64 xhci_hcd
[    2.398486] usb usb4: SerialNumber: 0000:03:00.0
[    2.398583] xHCI xhci_add_endpoint called for root hub
[    2.398585] xHCI xhci_check_bandwidth called for root hub
[    2.398614] hub 4-0:1.0: USB hub found
[    2.398623] hub 4-0:1.0: 2 ports detected
[    2.410255] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.410322] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.410326] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.410329] usb usb2: Product: EHCI Host Controller
[    2.410331] usb usb2: Manufacturer: Linux 3.2.0-0.bpo.4-amd64 ehci_hcd
[    2.410333] usb usb2: SerialNumber: 0000:00:1d.0
[    2.410586] hub 2-0:1.0: USB hub found
[    2.410592] hub 2-0:1.0: 2 ports detected
[    2.410706] ahci 0000:00:1f.2: version 3.0
[    2.410827] ahci 0000:00:1f.2: irq 50 for MSI/MSI-X
[    2.410907] ahci: SSS flag set, parallel bus scan disabled
[    2.426277] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode
[    2.426282] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst 
[    2.426289] ahci 0000:00:1f.2: setting latency timer to 64
[    2.442978] scsi0 : ahci
[    2.443268] scsi1 : ahci
[    2.443517] scsi2 : ahci
[    2.443714] scsi3 : ahci
[    2.443916] scsi4 : ahci
[    2.444119] scsi5 : ahci
[    2.444303] ata1: SATA max UDMA/133 abar m2048 at 0xf2b08000 port 0xf2b08100 irq 50
[    2.444307] ata2: SATA max UDMA/133 abar m2048 at 0xf2b08000 port 0xf2b08180 irq 50
[    2.444309] ata3: DUMMY
[    2.444311] ata4: DUMMY
[    2.444314] ata5: SATA max UDMA/133 abar m2048 at 0xf2b08000 port 0xf2b08300 irq 50
[    2.444315] ata6: DUMMY
[    2.701889] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    2.761809] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.764983] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    2.765367] ata1.00: ATA-8: WDC WD7500BPKT-75PK4T0, 01.01A01, max UDMA/133
[    2.765377] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.768454] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    2.768917] ata1.00: configured for UDMA/133
[    2.769296] scsi 0:0:0:0: Direct-Access     ATA      WDC WD7500BPKT-7 01.0 PQ: 0 ANSI: 5
[    2.834412] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.834421] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.835037] hub 1-1:1.0: USB hub found
[    2.835211] hub 1-1:1.0: 6 ports detected
[    2.945589] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    3.078075] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    3.078085] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.078709] hub 2-1:1.0: USB hub found
[    3.078894] hub 2-1:1.0: 8 ports detected
[    3.089393] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.093387] Refined TSC clocksource calibration: 1993.524 MHz.
[    3.093399] Switching to clocksource tsc
[    3.099312] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-L633J, D400, max UDMA/100
[    3.114906] ata2.00: configured for UDMA/100
[    3.127103] scsi 1:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-L633J D400 PQ: 0 ANSI: 5
[    3.149469] usb 1-1.3: new full-speed USB device number 3 using ehci_hcd
[    3.242727] usb 1-1.3: New USB device found, idVendor=138a, idProduct=0011
[    3.242736] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    3.242743] usb 1-1.3: SerialNumber: d5dc099e51ff
[    3.313273] usb 1-1.4: new high-speed USB device number 4 using ehci_hcd
[    3.444919] ata5: SATA link down (SStatus 0 SControl 300)
[    3.449341] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[    3.449350] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    3.449660] sd 0:0:0:0: [sda] Write Protect is off
[    3.449669] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.449773] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.453700] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.453708] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.454019] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.549743]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    3.551547] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.554199] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.554246] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    3.572818] usb 1-1.4: New USB device found, idVendor=1bcf, idProduct=2b81
[    3.572827] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.572833] usb 1-1.4: Product: Laptop_Integrated_Webcam_FHD
[    3.572838] usb 1-1.4: Manufacturer: CNFA151H1810278A3752
[    3.864481] usb 2-1.5: new full-speed USB device number 3 using ehci_hcd
[    3.960115] usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189
[    3.960125] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.346923] device-mapper: uevent: version 1.0.3
[    4.346989] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel at redhat.com
[    4.352400] PM: Starting manual resume from disk
[    4.352404] PM: Hibernation image partition 8:6 present
[    4.352405] PM: Looking for hibernation image.
[    4.352641] PM: Image not found (code -22)
[    4.352648] PM: Hibernation image not present or could not be loaded.
[    4.405966] kjournald starting.  Commit interval 5 seconds
[    4.406294] EXT3-fs (sda5): mounted filesystem with ordered data mode
[    6.060964] udev[342]: starting version 164
[    6.450253] wmi: Mapper loaded
[    6.634006] ACPI: resource 0000:00:1f.3 [io  0xefa0-0xefbf] conflicts with ACPI region SMBI [io 0xefa0-0xefaf]
[    6.634009] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.634843] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    6.634851] ACPI: Power Button [PWRB]
[    6.634944] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    6.634950] ACPI: Sleep Button [SLPB]
[    6.635033] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[    6.636044] ACPI: Lid Switch [LID0]
[    6.636206] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    6.636217] ACPI: Power Button [PWRF]
[    6.664389] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    6.685333] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    6.700555] input: Dell WMI hotkeys as /devices/virtual/input/input6
[    6.733539] ACPI: Requesting acpi_cpufreq
[    6.747059] cfg80211: Calling CRDA to update world regulatory domain
[    6.876523] ACPI: AC Adapter [ADP0] (off-line)
[    6.892056] ACPI: Battery Slot [BAT0] (battery present)
[    6.940478] Bluetooth: Core ver 2.16
[    6.940495] NET: Registered protocol family 31
[    6.940497] Bluetooth: HCI device and connection manager initialized
[    6.940499] Bluetooth: HCI socket layer initialized
[    6.940501] Bluetooth: L2CAP socket layer initialized
[    6.940506] Bluetooth: SCO socket layer initialized
[    6.964514] Linux media interface: v0.10
[    6.985909] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    6.986232] usbcore: registered new interface driver btusb
[    7.044401] Linux video capture interface: v2.00
[    7.058675] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_FHD (1bcf:2b81)
[    7.080560] input: Laptop_Integrated_Webcam_FHD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input7
[    7.080705] usbcore: registered new interface driver uvcvideo
[    7.080709] USB Video Class driver (1.1.1)
[    7.113230] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[    7.133751] [drm] Initialized drm 1.1.0 20060810
[    7.563442] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[    7.563444] Copyright(c) 2003-2011 Intel Corporation
[    7.563597] iwlwifi 0000:02:00.0: setting latency timer to 64
[    7.563642] iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000
[    7.563652] iwlwifi 0000:02:00.0: pci_resource_base = ffffc90000c78000
[    7.563654] iwlwifi 0000:02:00.0: HW Revision ID = 0x34
[    7.563779] iwlwifi 0000:02:00.0: irq 51 for MSI/MSI-X
[    7.563869] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 1030 BGN, REV=0xB0
[    7.563989] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[    7.579568] iwlwifi 0000:02:00.0: device EEPROM VER=0x716, CALIB=0x6
[    7.579570] iwlwifi 0000:02:00.0: Device SKU: 0X150
[    7.579572] iwlwifi 0000:02:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3
[    7.579707] iwlwifi 0000:02:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
[    7.731395] i915 0000:00:02.0: setting latency timer to 64
[    7.816753] i915 0000:00:02.0: irq 52 for MSI/MSI-X
[    7.816758] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    7.816759] [drm] Driver supports precise vblank timestamp query.
[    7.816874] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[    7.816951] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[    7.817028] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    7.817030] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[    7.873586] iwlwifi 0000:02:00.0: firmware: agent loaded iwlwifi-6000g2b-6.ucode into memory
[    7.873592] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1
[    7.874520] Registered led device: phy0-led
[    7.881401] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input8
[    7.897927] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input9
[    7.923716] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    8.212677] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    8.409818] fbcon: inteldrmfb (fb0) is primary device
[    8.596998] Console: switching to colour frame buffer device 200x56
[    8.599691] fb0: inteldrmfb frame buffer device
[    8.599692] drm: registered panic notifier
[    8.599870] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    8.603551] acpi device:27: registered as cooling_device8
[    8.603607] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:26/LNXVIDEO:00/input/input10
[    8.603696] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    8.676503] acpi device:2a: registered as cooling_device9
[    8.677019] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input11
[    8.677211] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    8.677249] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    8.677444] snd_hda_intel 0000:00:1b.0: irq 53 for MSI/MSI-X
[    8.677500] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    9.130814] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
[    9.133376] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    9.133523] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    9.995719] Adding 11802620k swap on /dev/sda6.  Priority:-1 extents:1 across:11802620k 
[   10.203162] EXT3-fs (sda5): using internal journal
[   10.395350] loop: module loaded
[   12.709833] fuse init (API version 7.17)
[   14.301411] RPC: Registered named UNIX socket transport module.
[   14.301417] RPC: Registered udp transport module.
[   14.301421] RPC: Registered tcp transport module.
[   14.301424] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   14.528070] FS-Cache: Loaded
[   14.774774] FS-Cache: Netfs 'nfs' registered for caching
[   14.823284] Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
[   15.063720] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input15
[   16.845063] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[   16.851828] iwlwifi 0000:02:00.0: Radio type=0x2-0x2-0x1
[   16.945351] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[   16.952104] iwlwifi 0000:02:00.0: Radio type=0x2-0x2-0x1
[   17.065394] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.342694] r8169 0000:04:00.0: firmware: agent loaded rtl_nic/rtl8168e-2.fw into memory
[   17.486538] r8169 0000:04:00.0: eth0: link down
[   17.487220] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.588433] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   20.588438] Bluetooth: BNEP filters: protocol multicast
[   20.660794] Bluetooth: RFCOMM TTY layer initialized
[   20.660814] Bluetooth: RFCOMM socket layer initialized
[   20.660818] Bluetooth: RFCOMM ver 1.11
[   20.663292] Bridge firewalling registered
[   22.709694] lp: driver loaded but no devices found
[   22.715487] ppdev: user-space parallel port driver
[   30.514778] ip_tables: (C) 2000-2006 Netfilter Core Team
[   31.102305] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   31.426516] ADDRCONF(NETDEV_UP): virbr0: link is not ready
[   33.444969] Ebtables v2.0 registered
[   33.599059] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   42.743124] sshd (2123): /proc/2123/oom_adj is deprecated, please use /proc/2123/oom_score_adj instead.
[   96.554837] wlan0: authenticate with ce:0c:76:da:f1:08 (try 1)
[   96.564675] wlan0: authenticated
[   96.564731] wlan0: waiting for beacon from ce:0c:76:da:f1:08
[   96.651602] wlan0: beacon received
[   96.651726] wlan0: associate with ce:0c:76:da:f1:08 (try 1)
[   96.668925] wlan0: RX AssocResp from ce:0c:76:da:f1:08 (capab=0x411 status=0 aid=1)
[   96.668929] wlan0: associated
[   96.672784] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  107.470395] wlan0: no IPv6 routers present
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Dell_Inc.-Dell_System_Vostro_3750.tar.gz
Type: application/x-gzip
Size: 112255 bytes
Desc: not available
URL: <http://lists.alioth.debian.org/pipermail/pkg-nvidia-devel/attachments/20130512/298c8245/attachment-0001.bin>


More information about the pkg-nvidia-devel mailing list