Bug#686277: GeForce 8300 and 8400 GS non-functional since 290.xx

Andres Cimmarusti acimmarusti at gmail.com
Sat Feb 1 00:26:37 UTC 2014


found 686277 nvidia-graphics-drivers/304.88-1+deb7u1
found 686277 nvidia-graphics-drivers/319.82-1~bpo70+1
thanks

I have just tested a newer versions of nvidia graphics driver. The
problem remains. With 319.82 system freezes temporarily after a
successful lightdm login and then kicks me out to login screen again.
Switching VT works but after a few seconds of a hard-freeze (mouse doesn't move)

dmesg and Xorg server logs attached, but once again, they are not helpful

I can't help but think that nvidia has forsaken linux users of these
two old video cards, since there has been no report whatsoever on the
status of this bug. I suppose I will try version 331.xx in due time,
but I suspect it will just be a waste of my time..

Andres
-------------- next part --------------
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-4-amd64 (debian-kernel at lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.51-1
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=a9299f70-8062-4abc-8c33-a5b4bffc428a ro quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[    0.000000]  BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cfe90000 (usable)
[    0.000000]  BIOS-e820: 00000000cfe90000 - 00000000cfee3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: Dell Inc. Vostro 400/0GN723, BIOS 1.0.11 01/31/2008
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0xcfe90 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CBFFF write-protect
[    0.000000]   CC000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 100000000 mask FE0000000 write-back
[    0.000000]   1 base 120000000 mask FF0000000 write-back
[    0.000000]   2 base 000000000 mask F80000000 write-back
[    0.000000]   3 base 080000000 mask FC0000000 write-back
[    0.000000]   4 base 0C0000000 mask FF0000000 write-back
[    0.000000]   5 base 0CFF00000 mask FFFF00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] found SMP MP-table at [ffff8800000f3f00] f3f00
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000cfe90000
[    0.000000]  0000000000 - 00cfe00000 page 2M
[    0.000000]  00cfe00000 - 00cfe90000 page 4k
[    0.000000] kernel direct mapping tables up to cfe90000 @ 1fffa000-20000000
[    0.000000] RAMDISK: 36b56000 - 375a3000
[    0.000000] ACPI: RSDP 00000000000f97a0 00024 (v02 DELL  )
[    0.000000] ACPI: XSDT 00000000cfee3080 0005C (v01 DELL    FX09    42302E31 AWRD 00000000)
[    0.000000] ACPI: FACP 00000000cfee7200 000F4 (v03 DELL    FX09    42302E31 AWRD 00000000)
[    0.000000] ACPI: DSDT 00000000cfee3200 03FFC (v01 DELL   AWRDACPI 00001000 MSFT 03000000)
[    0.000000] ACPI: FACS 00000000cfe90000 00040
[    0.000000] ACPI: HPET 00000000cfee73c0 00038 (v01 DELL    FX09    42302E31 AWRD 00000098)
[    0.000000] ACPI: MCFG 00000000cfee7400 0003C (v01 DELL    FX09    42302E31 AWRD 00000000)
[    0.000000] ACPI: SLIC 00000000cfee7440 00176 (v01 DELL    FX09    42302E31 AWRD 00000000)
[    0.000000] ACPI: DMY2 00000000cfee75c0 00080 (v01 DELL    FX09    42302E31 AWRD 00000000)
[    0.000000] ACPI: APIC 00000000cfee7300 00084 (v01 DELL    FX09    42302E31 AWRD 00000000)
[    0.000000] ACPI: SSDT 00000000cfee7ca0 00380 (v01  PmRef    CpuPm 00003000 INTL 20041203)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-00000000cfe90000
[    0.000000] Initmem setup node 0 0000000000000000-00000000cfe90000
[    0.000000]   NODE_DATA [00000000cfe8b000 - 00000000cfe8ffff]
[    0.000000]  [ffffea0000000000-ffffea0002dfffff] PMD -> [ffff8800cc200000-ffff8800ceffffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x000cfe90
[    0.000000] On node 0 totalpages: 851486
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3921 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11587 pages used for memmap
[    0.000000]   DMA32 zone: 835917 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:10100000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800cfc00000 s82944 r8192 d23552 u524288
[    0.000000] pcpu-alloc: s82944 r8192 d23552 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 839838
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=a9299f70-8062-4abc-8c33-a5b4bffc428a ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3339312k/3406400k available (3426k kernel code, 456k absent, 66632k reserved, 3312k data, 576k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:712 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2660.361 MHz processor.
[    0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.72 BogoMIPS (lpj=10641444)
[    0.004007] pid_max: default: 32768 minimum: 301
[    0.004045] Security Framework initialized
[    0.004050] AppArmor: AppArmor disabled by boot time parameter
[    0.004334] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.008058] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.009044] Mount-cache hash table entries: 256
[    0.009173] Initializing cgroup subsys cpuacct
[    0.009178] Initializing cgroup subsys memory
[    0.009190] Initializing cgroup subsys devices
[    0.009192] Initializing cgroup subsys freezer
[    0.009194] Initializing cgroup subsys net_cls
[    0.009196] Initializing cgroup subsys blkio
[    0.009203] Initializing cgroup subsys perf_event
[    0.009232] CPU: Physical Processor ID: 0
[    0.009234] CPU: Processor Core ID: 0
[    0.009236] mce: CPU supports 6 MCE banks
[    0.009243] CPU0: Thermal monitoring enabled (TM2)
[    0.009247] using mwait in idle threads.
[    0.009625] ACPI: Core revision 20110623
[    0.012412] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.052770] CPU0: Intel(R) Core(TM)2 Duo CPU     E6750  @ 2.66GHz stepping 0b
[    0.056003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.056003] PEBS disabled due to CPU errata.
[    0.056003] ... version:                2
[    0.056003] ... bit width:              40
[    0.056003] ... generic registers:      2
[    0.056003] ... value mask:             000000ffffffffff
[    0.056003] ... max period:             000000007fffffff
[    0.056003] ... fixed-purpose events:   3
[    0.056003] ... event mask:             0000000700000003
[    0.056003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.056003] Booting Node   0, Processors  #1
[    0.056003] smpboot cpu 1: start_ip = 99000
[    0.144035] NMI watchdog enabled, takes one hw-pmu counter.
[    0.144068] Brought up 2 CPUs
[    0.144070] Total of 2 processors activated (10640.71 BogoMIPS).
[    0.145676] devtmpfs: initialized
[    0.148253] PM: Registering ACPI NVS region at cfe90000 (339968 bytes)
[    0.148253] print_constraints: dummy: 
[    0.148253] NET: Registered protocol family 16
[    0.148292] ACPI: bus type pci registered
[    0.148350] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.148353] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.163166] PCI: Using configuration type 1 for base access
[    0.163738] bio: create slab <bio-0> at 0
[    0.163738] ACPI: Added _OSI(Module Device)
[    0.163738] ACPI: Added _OSI(Processor Device)
[    0.163738] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.163738] ACPI: Added _OSI(Processor Aggregator Device)
[    0.164654] ACPI: EC: Look up EC in DSDT
[    0.167917] ACPI: SSDT 00000000cfee7680 0022A (v01  PmRef  Cpu0Ist 00003000 INTL 20041203)
[    0.168097] ACPI: Dynamic OEM Table Load:
[    0.168100] ACPI: SSDT           (null) 0022A (v01  PmRef  Cpu0Ist 00003000 INTL 20041203)
[    0.168258] ACPI: SSDT 00000000cfee7b40 00152 (v01  PmRef  Cpu1Ist 00003000 INTL 20041203)
[    0.168416] ACPI: Dynamic OEM Table Load:
[    0.168419] ACPI: SSDT           (null) 00152 (v01  PmRef  Cpu1Ist 00003000 INTL 20041203)
[    0.168547] ACPI: Interpreter enabled
[    0.168551] ACPI: (supports S0 S3 S4 S5)
[    0.168569] ACPI: Using IOAPIC for interrupt routing
[    0.172033] ACPI: No dock devices found.
[    0.172035] HEST: Table not found.
[    0.172038] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.172086] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.172197] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.172199] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.172202] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.172204] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
[    0.172206] pci_root PNP0A08:00: host bridge window [mem 0xcff00000-0xfebfffff]
[    0.172217] pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600
[    0.172253] pci 0000:00:01.0: [8086:29c1] type 1 class 0x000604
[    0.172284] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.172319] pci 0000:00:19.0: [8086:10c0] type 0 class 0x000200
[    0.172335] pci 0000:00:19.0: reg 10: [mem 0xfdfc0000-0xfdfdffff]
[    0.172342] pci 0000:00:19.0: reg 14: [mem 0xfdfff000-0xfdffffff]
[    0.172349] pci 0000:00:19.0: reg 18: [io  0xff00-0xff1f]
[    0.172402] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.172420] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[    0.172456] pci 0000:00:1a.0: reg 20: [io  0xfe00-0xfe1f]
[    0.172500] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[    0.172536] pci 0000:00:1a.1: reg 20: [io  0xfd00-0xfd1f]
[    0.172580] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
[    0.172615] pci 0000:00:1a.2: reg 20: [io  0xfc00-0xfc1f]
[    0.172663] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[    0.172678] pci 0000:00:1a.7: reg 10: [mem 0xfdffe000-0xfdffe3ff]
[    0.172740] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.172760] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[    0.172772] pci 0000:00:1b.0: reg 10: [mem 0xfdff4000-0xfdff7fff 64bit]
[    0.172828] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.172848] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[    0.172884] pci 0000:00:1d.0: reg 20: [io  0xfb00-0xfb1f]
[    0.172928] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[    0.172963] pci 0000:00:1d.1: reg 20: [io  0xfa00-0xfa1f]
[    0.173008] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[    0.173043] pci 0000:00:1d.2: reg 20: [io  0xf900-0xf91f]
[    0.173091] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[    0.173106] pci 0000:00:1d.7: reg 10: [mem 0xfdffd000-0xfdffd3ff]
[    0.173168] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.173184] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[    0.173237] pci 0000:00:1f.0: [8086:2916] type 0 class 0x000601
[    0.173307] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f)
[    0.173311] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 003f)
[    0.173352] pci 0000:00:1f.2: [8086:2920] type 0 class 0x000101
[    0.173365] pci 0000:00:1f.2: reg 10: [io  0xf800-0xf807]
[    0.173371] pci 0000:00:1f.2: reg 14: [io  0xf700-0xf703]
[    0.173378] pci 0000:00:1f.2: reg 18: [io  0xf600-0xf607]
[    0.173385] pci 0000:00:1f.2: reg 1c: [io  0xf500-0xf503]
[    0.173392] pci 0000:00:1f.2: reg 20: [io  0xf400-0xf40f]
[    0.173398] pci 0000:00:1f.2: reg 24: [io  0xf300-0xf30f]
[    0.173439] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[    0.173452] pci 0000:00:1f.3: reg 10: [mem 0xfdffc000-0xfdffc0ff 64bit]
[    0.173469] pci 0000:00:1f.3: reg 20: [io  0x0500-0x051f]
[    0.173498] pci 0000:00:1f.5: [8086:2926] type 0 class 0x000101
[    0.173511] pci 0000:00:1f.5: reg 10: [io  0xf100-0xf107]
[    0.173518] pci 0000:00:1f.5: reg 14: [io  0xf000-0xf003]
[    0.173525] pci 0000:00:1f.5: reg 18: [io  0xef00-0xef07]
[    0.173531] pci 0000:00:1f.5: reg 1c: [io  0xee00-0xee03]
[    0.173538] pci 0000:00:1f.5: reg 20: [io  0xed00-0xed0f]
[    0.173545] pci 0000:00:1f.5: reg 24: [io  0xec00-0xec0f]
[    0.173609] pci 0000:01:00.0: [10de:0423] type 0 class 0x000300
[    0.173618] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[    0.173627] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.173637] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
[    0.173644] pci 0000:01:00.0: reg 24: [io  0xcf00-0xcf7f]
[    0.173650] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.173696] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.173699] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.173702] pci 0000:00:01.0:   bridge window [mem 0xf8000000-0xfbffffff]
[    0.173705] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.173757] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
[    0.173761] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.173764] pci 0000:00:1e.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.173769] pci 0000:00:1e.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.173772] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.173774] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.173776] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.173779] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.173781] pci 0000:00:1e.0:   bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode)
[    0.173790] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.173940] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.174030]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.174033]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.174035] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.183581] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[    0.183626] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.183671] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[    0.183714] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.183758] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[    0.183802] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.183846] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 7 9 10 11 12 14 15)
[    0.183889] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 *4 5 7 9 10 11 12 14 15)
[    0.183970] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.183970] vgaarb: loaded
[    0.184012] vgaarb: bridge control possible 0000:01:00.0
[    0.184050] PCI: Using ACPI for IRQ routing
[    0.189100] PCI: pci_cache_line_size set to 64 bytes
[    0.189154] reserve RAM buffer: 000000000009e800 - 000000000009ffff 
[    0.189157] reserve RAM buffer: 00000000cfe90000 - 00000000cfffffff 
[    0.189256] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.189261] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.189265] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.192082] Switching to clocksource hpet
[    0.193700] pnp: PnP ACPI init
[    0.193713] ACPI: bus type pnp registered
[    0.193782] pnp 00:00: [bus 00-ff]
[    0.193784] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.193786] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.193788] pnp 00:00: [io  0x0d00-0xffff window]
[    0.193790] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.193792] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[    0.193794] pnp 00:00: [mem 0xcff00000-0xfebfffff window]
[    0.193839] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.193897] pnp 00:01: [io  0x0010-0x001f]
[    0.193899] pnp 00:01: [io  0x0022-0x003f]
[    0.193900] pnp 00:01: [io  0x0044-0x005f]
[    0.193902] pnp 00:01: [io  0x0060]
[    0.193904] pnp 00:01: [io  0x0064]
[    0.193905] pnp 00:01: [io  0x0062-0x0063]
[    0.193907] pnp 00:01: [io  0x0065-0x006f]
[    0.193908] pnp 00:01: [io  0x0074-0x007f]
[    0.193910] pnp 00:01: [io  0x0091-0x0093]
[    0.193912] pnp 00:01: [io  0x00a2-0x00bf]
[    0.193914] pnp 00:01: [io  0x00e0-0x00ef]
[    0.193915] pnp 00:01: [io  0x04d0-0x04d1]
[    0.193917] pnp 00:01: [io  0x0800-0x087f]
[    0.193919] pnp 00:01: [io  0x0290-0x0297]
[    0.193920] pnp 00:01: [io  0x0880-0x088f]
[    0.193973] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.193976] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.193979] system 00:01: [io  0x0290-0x0297] has been reserved
[    0.193981] system 00:01: [io  0x0880-0x088f] has been reserved
[    0.193984] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.193996] pnp 00:02: [dma 4]
[    0.193998] pnp 00:02: [io  0x0000-0x000f]
[    0.194000] pnp 00:02: [io  0x0080-0x0090]
[    0.194002] pnp 00:02: [io  0x0094-0x009f]
[    0.194004] pnp 00:02: [io  0x00c0-0x00df]
[    0.194030] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.194075] pnp 00:03: [irq 0 disabled]
[    0.194083] pnp 00:03: [irq 8]
[    0.194085] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    0.194111] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.194136] pnp 00:04: [io  0x0070-0x0073]
[    0.194163] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.194172] pnp 00:05: [io  0x0061]
[    0.194197] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.194206] pnp 00:06: [io  0x00f0-0x00ff]
[    0.194211] pnp 00:06: [irq 13]
[    0.194237] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.194368] pnp 00:07: [io  0x03f0-0x03f5]
[    0.194370] pnp 00:07: [io  0x03f7]
[    0.194375] pnp 00:07: [irq 6]
[    0.194376] pnp 00:07: [dma 2]
[    0.194415] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.194468] pnp 00:08: [io  0x0400-0x04bf]
[    0.194512] system 00:08: [io  0x0400-0x04bf] has been reserved
[    0.194515] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.194533] pnp 00:09: [mem 0xffb80000-0xffbfffff]
[    0.194562] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
[    0.194737] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[    0.194786] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[    0.194789] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.194854] pnp 00:0b: [mem 0x000f0000-0x000fffff]
[    0.194857] pnp 00:0b: [mem 0xcff00000-0xcfffffff]
[    0.194859] pnp 00:0b: [mem 0xfed00000-0xfed000ff]
[    0.194860] pnp 00:0b: [mem 0xcfe90000-0xcfefffff]
[    0.194862] pnp 00:0b: [mem 0x00000000-0x0009ffff]
[    0.194864] pnp 00:0b: [mem 0x00100000-0xcfe8ffff]
[    0.194866] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[    0.194868] pnp 00:0b: [mem 0xfed14000-0xfed1dfff]
[    0.194870] pnp 00:0b: [mem 0xfed20000-0xfed9ffff]
[    0.194871] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[    0.194874] pnp 00:0b: [mem 0xffb00000-0xffb7ffff]
[    0.194876] pnp 00:0b: [mem 0xfff00000-0xffffffff]
[    0.194878] pnp 00:0b: [mem 0x000e0000-0x000effff]
[    0.194932] system 00:0b: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.194935] system 00:0b: [mem 0xcff00000-0xcfffffff] has been reserved
[    0.194938] system 00:0b: [mem 0xfed00000-0xfed000ff] has been reserved
[    0.194940] system 00:0b: [mem 0xcfe90000-0xcfefffff] could not be reserved
[    0.194943] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.194945] system 00:0b: [mem 0x00100000-0xcfe8ffff] could not be reserved
[    0.194948] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.194950] system 00:0b: [mem 0xfed14000-0xfed1dfff] has been reserved
[    0.194953] system 00:0b: [mem 0xfed20000-0xfed9ffff] has been reserved
[    0.194955] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.194958] system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.194961] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
[    0.194964] system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
[    0.194967] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.194975] pnp: PnP ACPI: found 12 devices
[    0.194976] ACPI: ACPI bus type pnp unregistered
[    0.201473] PCI: max bus depth: 1 pci_try_num: 2
[    0.201490] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
[    0.201493] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.201495] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.201498] pci 0000:00:01.0:   bridge window [mem 0xf8000000-0xfbffffff]
[    0.201501] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.201505] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[    0.201508] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.201512] pci 0000:00:1e.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.201515] pci 0000:00:1e.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.201529] pci 0000:00:01.0: setting latency timer to 64
[    0.201535] pci 0000:00:1e.0: setting latency timer to 64
[    0.201538] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.201540] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.201542] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.201544] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.201546] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
[    0.201548] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.201550] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
[    0.201552] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.201554] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.201556] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[    0.201558] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.201560] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7]
[    0.201562] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff]
[    0.201564] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[    0.201566] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff]
[    0.201568] pci_bus 0000:02: resource 8 [mem 0xcff00000-0xfebfffff]
[    0.201614] NET: Registered protocol family 2
[    0.201739] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.202652] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.205850] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.206310] TCP: Hash tables configured (established 524288 bind 65536)
[    0.206312] TCP reno registered
[    0.206321] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.206357] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.206502] NET: Registered protocol family 1
[    0.206708] pci 0000:01:00.0: Boot video device
[    0.206711] PCI: CLS 64 bytes, default 64
[    0.206762] Unpacking initramfs...
[    0.407843] Freeing initrd memory: 10548k freed
[    0.411368] audit: initializing netlink socket (disabled)
[    0.411383] type=2000 audit(1391212953.404:1): initialized
[    0.422641] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.423178] VFS: Disk quotas dquot_6.5.2
[    0.423205] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.423271] msgmni has been set to 6542
[    0.423416] alg: No test for stdrng (krng)
[    0.423440] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.423443] io scheduler noop registered
[    0.423445] io scheduler deadline registered
[    0.423456] io scheduler cfq registered (default)
[    0.423527] pcieport 0000:00:01.0: setting latency timer to 64
[    0.423554] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.423617] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.423637] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.423638] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.423924] intel_idle: does not run on family 6 model 15
[    0.423946] ERST: Table is not found!
[    0.423948] GHES: HEST is not enabled!
[    0.424010] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.468388] Linux agpgart interface v0.103
[    0.468586] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.468926] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.468932] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.469046] mousedev: PS/2 mouse device common for all mice
[    0.469089] rtc_cmos 00:04: RTC can wake from S4
[    0.469182] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.469205] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.469215] cpuidle: using governor ladder
[    0.469216] cpuidle: using governor menu
[    0.469391] TCP cubic registered
[    0.469426] NET: Registered protocol family 10
[    0.469817] Mobile IPv6
[    0.469820] NET: Registered protocol family 17
[    0.469823] Registering the dns_resolver key type
[    0.469933] PM: Hibernation image not present or could not be loaded.
[    0.469942] registered taskstats version 1
[    0.470329] rtc_cmos 00:04: setting system clock to 2014-02-01 00:02:34 UTC (1391212954)
[    0.470360] Initializing network drop monitor service
[    0.471456] Freeing unused kernel memory: 576k freed
[    0.471580] Write protecting the kernel read-only data: 6144k
[    0.473754] Freeing unused kernel memory: 652k freed
[    0.476142] Freeing unused kernel memory: 688k freed
[    0.485024] udevd[49]: starting version 175
[    0.502852] SCSI subsystem initialized
[    0.503950] usbcore: registered new interface driver usbfs
[    0.503971] usbcore: registered new interface driver hub
[    0.512740] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[    0.512743] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[    0.512785] e1000e 0000:00:19.0: setting latency timer to 64
[    0.512863] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[    0.527299] usbcore: registered new device driver usb
[    0.527661] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.537133] libata version 3.00 loaded.
[    0.540693] uhci_hcd: USB Universal Host Controller Interface driver
[    0.544968] ACPI: Fan [FAN] (on)
[    0.558423] thermal LNXTHERM:00: registered as thermal_zone0
[    0.558426] ACPI: Thermal Zone [THRM] (40 C)
[    0.575641] FDC 0 is a post-1991 82077
[    0.699951] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1d:09:86:69:53
[    0.699954] e1000e 0000:00:19.0: eth0: Intel(R) PRO/10/100 Network Connection
[    0.699974] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 7, PBA No: FFFFFF-0FF
[    0.700029] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.700033] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.700057] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.703958] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[    0.703974] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdffe000
[    0.716024] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.716048] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.716051] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.716054] usb usb1: Product: EHCI Host Controller
[    0.716056] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    0.716059] usb usb1: SerialNumber: 0000:00:1a.7
[    0.716189] hub 1-0:1.0: USB hub found
[    0.716195] hub 1-0:1.0: 6 ports detected
[    0.716279] ata_piix 0000:00:1f.2: version 2.13
[    0.716289] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.716326] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.716579] scsi0 : ata_piix
[    0.716659] scsi1 : ata_piix
[    0.717131] ata1: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19
[    0.717136] ata2: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19
[    0.717157] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.717189] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.717438] scsi2 : ata_piix
[    0.717494] scsi3 : ata_piix
[    0.717701] ata3: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 19
[    0.717705] ata4: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 19
[    0.717729] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.717733] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.717741] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[    0.717776] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fe00
[    0.717806] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.717808] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.717810] usb usb2: Product: UHCI Host Controller
[    0.717812] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[    0.717814] usb usb2: SerialNumber: 0000:00:1a.0
[    0.717919] hub 2-0:1.0: USB hub found
[    0.717924] hub 2-0:1.0: 2 ports detected
[    0.717988] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.717991] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.718000] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
[    0.718029] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fd00
[    0.718059] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.718061] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.718063] usb usb3: Product: UHCI Host Controller
[    0.718065] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[    0.718067] usb usb3: SerialNumber: 0000:00:1a.1
[    0.718468] hub 3-0:1.0: USB hub found
[    0.718472] hub 3-0:1.0: 2 ports detected
[    0.718538] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.718541] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.718548] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4
[    0.718570] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fc00
[    0.718600] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.718602] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.718604] usb usb4: Product: UHCI Host Controller
[    0.718606] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[    0.718608] usb usb4: SerialNumber: 0000:00:1a.2
[    0.718935] hub 4-0:1.0: USB hub found
[    0.718940] hub 4-0:1.0: 2 ports detected
[    0.719004] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.719006] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.719013] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    0.719043] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fb00
[    0.719072] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.719074] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.719076] usb usb5: Product: UHCI Host Controller
[    0.719078] usb usb5: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[    0.719079] usb usb5: SerialNumber: 0000:00:1d.0
[    0.719706] hub 5-0:1.0: USB hub found
[    0.719710] hub 5-0:1.0: 2 ports detected
[    0.719777] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.719779] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.719788] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    0.719810] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fa00
[    0.719839] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.719842] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.719844] usb usb6: Product: UHCI Host Controller
[    0.719845] usb usb6: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[    0.719847] usb usb6: SerialNumber: 0000:00:1d.1
[    0.719939] hub 6-0:1.0: USB hub found
[    0.719943] hub 6-0:1.0: 2 ports detected
[    0.720020] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.720023] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.720029] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    0.720051] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f900
[    0.720080] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.720082] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.720084] usb usb7: Product: UHCI Host Controller
[    0.720086] usb usb7: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[    0.720088] usb usb7: SerialNumber: 0000:00:1d.2
[    0.720172] hub 7-0:1.0: USB hub found
[    0.720176] hub 7-0:1.0: 2 ports detected
[    0.720281] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.720284] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.720291] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[    0.724200] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    0.724207] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffd000
[    0.740023] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.740044] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[    0.740047] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.740049] usb usb8: Product: EHCI Host Controller
[    0.740052] usb usb8: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    0.740054] usb usb8: SerialNumber: 0000:00:1d.7
[    0.740180] hub 8-0:1.0: USB hub found
[    0.740186] hub 8-0:1.0: 6 ports detected
[    1.046588] ata3: SATA link down (SStatus 0 SControl 300)
[    1.057176] ata4: SATA link down (SStatus 0 SControl 300)
[    1.268023] usb 4-1: new low-speed USB device number 2 using uhci_hcd
[    1.408032] Refined TSC clocksource calibration: 2659.999 MHz.
[    1.408036] Switching to clocksource tsc
[    1.442603] usb 4-1: New USB device found, idVendor=413c, idProduct=2003
[    1.442606] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.442609] usb 4-1: Product: Dell USB Keyboard
[    1.442611] usb 4-1: Manufacturer: Dell
[    1.512097] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.512108] ata1.01: SATA link down (SStatus 0 SControl 300)
[    1.520232] ata1.00: ATA-8: ST3250310AS, 3.ADA, max UDMA/133
[    1.520234] ata1.00: 488281250 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.524065] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.524078] ata2.01: SATA link down (SStatus 0 SControl 300)
[    1.524089] ata2.01: link offline, clearing class 3 to NONE
[    1.532125] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-H653B, D300, max UDMA/100
[    1.532128] ata2.00: applying bridge limits
[    1.536229] ata1.00: configured for UDMA/133
[    1.536324] scsi 0:0:0:0: Direct-Access     ATA      ST3250310AS      3.AD PQ: 0 ANSI: 5
[    1.548138] ata2.00: configured for UDMA/100
[    1.549939] scsi 1:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-H653B D300 PQ: 0 ANSI: 5
[    1.555846] sd 0:0:0:0: [sda] 488281250 512-byte logical blocks: (250 GB/232 GiB)
[    1.555922] sd 0:0:0:0: [sda] Write Protect is off
[    1.555924] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.555949] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.557131] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    1.557134] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.557356] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.567853] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.2/usb4/4-1/4-1:1.0/input/input0
[    1.567904] generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.2-1/input0
[    1.567919] usbcore: registered new interface driver usbhid
[    1.567921] usbhid: USB HID core driver
[    1.586310]  sda: sda1 sda2 < sda5 >
[    1.586573] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.589745] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.589790] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.684016] usb 4-2: new low-speed USB device number 3 using uhci_hcd
[    1.851606] usb 4-2: New USB device found, idVendor=0461, idProduct=4d22
[    1.851610] usb 4-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    1.851612] usb 4-2: Product: USB Optical Mouse
[    1.867812] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.2/usb4/4-2/4-2:1.0/input/input1
[    1.867874] generic-usb 0003:0461:4D22.0002: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.2-2/input0
[    1.965770] microcode: CPU0 sig=0x6fb, pf=0x1, revision=0xb6
[    1.967569] platform microcode: firmware: agent loaded intel-ucode/06-0f-0b into memory
[    1.971547] microcode: CPU0 updated to revision 0xba, date = 2010-10-03
[    1.972683] microcode: CPU1 sig=0x6fb, pf=0x1, revision=0xb6
[    1.974727] platform microcode: firmware: agent loaded intel-ucode/06-0f-0b into memory
[    1.978676] microcode: CPU1 updated to revision 0xba, date = 2010-10-03
[    1.979844] microcode: Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
[    2.036488] PM: Starting manual resume from disk
[    2.036491] PM: Hibernation image partition 8:5 present
[    2.036492] PM: Looking for hibernation image.
[    2.036642] PM: Image not found (code -22)
[    2.036644] PM: Hibernation image not present or could not be loaded.
[    2.091497] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.009412] udevd[351]: starting version 175
[    4.593755] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    4.593761] ACPI: Power Button [PWRB]
[    4.593825] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    4.593828] ACPI: Power Button [PWRF]
[    4.627315] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    4.678438] ACPI: Requesting acpi_cpufreq
[    4.760029] coretemp coretemp.0: Using relative temperature scale!
[    4.760043] coretemp coretemp.0: Using relative temperature scale!
[    4.941541] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    5.408775] iTCO_vendor_support: vendor-support=0
[    5.409525] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[    5.409616] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0460)
[    5.409670] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    5.486760] nvidia: module license 'NVIDIA' taints kernel.
[    5.486764] Disabling lock debugging due to kernel taint
[    5.633762] nvidia 0000:01:00.0: setting latency timer to 64
[    5.633767] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    5.633847] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  319.82  Mon Dec 30 02:18:32 PST 2013
[    5.727412] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[    5.727435] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    5.903683] hda_codec: ALC888: BIOS auto-probing.
[    5.906101] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[    5.911155] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    7.636027] Adding 6809596k swap on /dev/sda5.  Priority:-1 extents:1 across:6809596k 
[    7.649193] EXT4-fs (sda1): re-mounted. Opts: (null)
[    7.854061] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    8.074481] loop: module loaded
[    8.118688] it87: Found IT8718F chip at 0x290, revision 3
[    8.118730] ACPI: resource it87 [io  0x0295-0x0296] conflicts with ACPI region IP__ [io 0x295-0x296]
[    8.118732] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.327700] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[    9.380049] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[    9.380672] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.627178] RPC: Registered named UNIX socket transport module.
[    9.627181] RPC: Registered udp transport module.
[    9.627182] RPC: Registered tcp transport module.
[    9.627184] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    9.676984] FS-Cache: Loaded
[    9.741750] FS-Cache: Netfs 'nfs' registered for caching
[    9.750334] Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
[   10.836777] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[   10.836781] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[   10.837229] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   11.239351] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   11.260335] NFSD: starting 90-second grace period
[   15.316286] lp: driver loaded but no devices found
[   15.578130] Bluetooth: Core ver 2.16
[   15.578144] NET: Registered protocol family 31
[   15.578145] Bluetooth: HCI device and connection manager initialized
[   15.578148] Bluetooth: HCI socket layer initialized
[   15.578149] Bluetooth: L2CAP socket layer initialized
[   15.578154] Bluetooth: SCO socket layer initialized
[   15.599511] ppdev: user-space parallel port driver
[   15.870869] Bluetooth: RFCOMM TTY layer initialized
[   15.870873] Bluetooth: RFCOMM socket layer initialized
[   15.870875] Bluetooth: RFCOMM ver 1.11
[   16.496040] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.496043] Bluetooth: BNEP filters: protocol multicast
[   19.424464] FS-Cache: Netfs 'cifs' registered for caching
[   19.475130] CIFS VFS: default security mechanism requested.  The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3
[   28.864028] eth0: no IPv6 routers present
[   43.427032] fuse init (API version 7.17)
[   53.739960] NVRM: GPU at 0000:01:00: GPU-5ce65206-c06f-2412-9fbd-c7ef3a441617
[   53.739965] NVRM: Xid (0000:01:00): 13, 0001 00000000 00005097 000015e0 00000000 00000080
-------------- next part --------------
[    94.416] 
X.Org X Server 1.12.4
Release Date: 2012-08-27
[    94.416] X Protocol Version 11, Revision 0
[    94.416] Build Operating System: Linux 3.11-2-amd64 x86_64 Debian
[    94.416] Current Operating System: Linux phonon 3.2.0-4-amd64 #1 SMP Debian 3.2.51-1 x86_64
[    94.416] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=a9299f70-8062-4abc-8c33-a5b4bffc428a ro quiet
[    94.416] Build Date: 17 December 2013  07:37:58PM
[    94.416] xorg-server 2:1.12.4-6+deb7u2 (Julien Cristau <jcristau at debian.org>) 
[    94.416] Current version of pixman: 0.26.0
[    94.416] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    94.416] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    94.416] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 31 19:04:08 2014
[    94.416] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    94.416] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    94.416] (==) No Layout section.  Using the first Screen section.
[    94.416] (==) No screen section available. Using defaults.
[    94.416] (**) |-->Screen "Default Screen Section" (0)
[    94.416] (**) |   |-->Monitor "<default monitor>"
[    94.417] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[    94.417] (**) |   |-->Device "GeForce 8300 GS"
[    94.417] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    94.417] (**) Option "BlankTime" "0"
[    94.417] (==) Automatically adding devices
[    94.417] (==) Automatically enabling devices
[    94.417] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    94.417] 	Entry deleted from font path.
[    94.417] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    94.417] 	Entry deleted from font path.
[    94.417] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
[    94.417] (==) ModulePath set to "/usr/lib/xorg/modules"
[    94.417] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    94.417] (II) Loader magic: 0x7fca95823ae0
[    94.417] (II) Module ABI versions:
[    94.417] 	X.Org ANSI C Emulation: 0.4
[    94.417] 	X.Org Video Driver: 12.1
[    94.417] 	X.Org XInput driver : 16.0
[    94.417] 	X.Org Server Extension : 6.0
[    94.417] (--) PCI:*(0:1:0:0) 10de:0423:10de:0494 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000cf00/128, BIOS @ 0x????????/131072
[    94.418] (II) Open ACPI successful (/var/run/acpid.socket)
[    94.418] (II) LoadModule: "extmod"
[    94.418] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    94.418] (II) Module extmod: vendor="X.Org Foundation"
[    94.418] 	compiled for 1.12.4, module version = 1.0.0
[    94.418] 	Module class: X.Org Server Extension
[    94.418] 	ABI class: X.Org Server Extension, version 6.0
[    94.418] (II) Loading extension SELinux
[    94.418] (II) Loading extension MIT-SCREEN-SAVER
[    94.418] (II) Loading extension XFree86-VidModeExtension
[    94.418] (II) Loading extension XFree86-DGA
[    94.418] (II) Loading extension DPMS
[    94.418] (II) Loading extension XVideo
[    94.418] (II) Loading extension XVideo-MotionCompensation
[    94.418] (II) Loading extension X-Resource
[    94.418] (II) LoadModule: "dbe"
[    94.418] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    94.418] (II) Module dbe: vendor="X.Org Foundation"
[    94.418] 	compiled for 1.12.4, module version = 1.0.0
[    94.418] 	Module class: X.Org Server Extension
[    94.418] 	ABI class: X.Org Server Extension, version 6.0
[    94.418] (II) Loading extension DOUBLE-BUFFER
[    94.419] (II) LoadModule: "glx"
[    94.419] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[    94.433] (II) Module glx: vendor="NVIDIA Corporation"
[    94.433] 	compiled for 4.0.2, module version = 1.0.0
[    94.433] 	Module class: X.Org Server Extension
[    94.433] (II) NVIDIA GLX Module  319.82  Sun Dec 29 23:17:58 PST 2013
[    94.433] (II) Loading extension GLX
[    94.433] (II) LoadModule: "record"
[    94.433] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    94.433] (II) Module record: vendor="X.Org Foundation"
[    94.433] 	compiled for 1.12.4, module version = 1.13.0
[    94.433] 	Module class: X.Org Server Extension
[    94.433] 	ABI class: X.Org Server Extension, version 6.0
[    94.433] (II) Loading extension RECORD
[    94.433] (II) LoadModule: "dri"
[    94.433] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    94.433] (II) Module dri: vendor="X.Org Foundation"
[    94.433] 	compiled for 1.12.4, module version = 1.0.0
[    94.433] 	ABI class: X.Org Server Extension, version 6.0
[    94.433] (II) Loading extension XFree86-DRI
[    94.433] (II) LoadModule: "dri2"
[    94.433] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    94.434] (II) Module dri2: vendor="X.Org Foundation"
[    94.434] 	compiled for 1.12.4, module version = 1.2.0
[    94.434] 	ABI class: X.Org Server Extension, version 6.0
[    94.434] (II) Loading extension DRI2
[    94.434] (II) LoadModule: "nvidia"
[    94.434] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    94.434] (II) Module nvidia: vendor="NVIDIA Corporation"
[    94.434] 	compiled for 4.0.2, module version = 1.0.0
[    94.434] 	Module class: X.Org Video Driver
[    94.434] (II) NVIDIA dlloader X Driver  319.82  Sun Dec 29 22:59:30 PST 2013
[    94.434] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    94.434] (++) using VT number 7

[    94.436] (II) Loading sub module "fb"
[    94.436] (II) LoadModule: "fb"
[    94.436] (II) Loading /usr/lib/xorg/modules/libfb.so
[    94.437] (II) Module fb: vendor="X.Org Foundation"
[    94.437] 	compiled for 1.12.4, module version = 1.0.0
[    94.437] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    94.437] (II) Loading sub module "wfb"
[    94.437] (II) LoadModule: "wfb"
[    94.437] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    94.437] (II) Module wfb: vendor="X.Org Foundation"
[    94.437] 	compiled for 1.12.4, module version = 1.0.0
[    94.437] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    94.437] (II) Loading sub module "shadow"
[    94.437] (II) LoadModule: "shadow"
[    94.437] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    94.437] (II) Module shadow: vendor="X.Org Foundation"
[    94.437] 	compiled for 1.12.4, module version = 1.1.0
[    94.437] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    94.437] (II) Loading sub module "ramdac"
[    94.437] (II) LoadModule: "ramdac"
[    94.437] (II) Module "ramdac" already built-in
[    94.437] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    94.437] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    94.437] (==) NVIDIA(0): RGB weight 888
[    94.437] (==) NVIDIA(0): Default visual is TrueColor
[    94.437] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    94.437] (**) NVIDIA(0): Option "NoLogo" "True"
[    94.437] (**) NVIDIA(0): Enabling 2D acceleration
[    94.733] drmOpenDevice: node name is /dev/dri/card0
[    94.737] drmOpenByBusid: Searching for BusID PCI:1:0:0
[    94.737] drmOpenDevice: node name is /dev/dri/card0
[    94.741] drmOpenByBusid: drmOpenMinor returns -1
[    94.741] drmOpenDevice: node name is /dev/dri/card1
[    94.745] drmOpenByBusid: drmOpenMinor returns -1
[    94.745] drmOpenDevice: node name is /dev/dri/card2
[    94.748] drmOpenByBusid: drmOpenMinor returns -1
[    94.748] drmOpenDevice: node name is /dev/dri/card3
[    94.752] drmOpenByBusid: drmOpenMinor returns -1
[    94.752] drmOpenDevice: node name is /dev/dri/card4
[    94.756] drmOpenByBusid: drmOpenMinor returns -1
[    94.756] drmOpenDevice: node name is /dev/dri/card5
[    94.759] drmOpenByBusid: drmOpenMinor returns -1
[    94.759] drmOpenDevice: node name is /dev/dri/card6
[    94.763] drmOpenByBusid: drmOpenMinor returns -1
[    94.763] drmOpenDevice: node name is /dev/dri/card7
[    94.767] drmOpenByBusid: drmOpenMinor returns -1
[    94.767] drmOpenDevice: node name is /dev/dri/card8
[    94.771] drmOpenByBusid: drmOpenMinor returns -1
[    94.771] drmOpenDevice: node name is /dev/dri/card9
[    94.774] drmOpenByBusid: drmOpenMinor returns -1
[    94.774] drmOpenDevice: node name is /dev/dri/card10
[    94.778] drmOpenByBusid: drmOpenMinor returns -1
[    94.778] drmOpenDevice: node name is /dev/dri/card11
[    94.782] drmOpenByBusid: drmOpenMinor returns -1
[    94.782] drmOpenDevice: node name is /dev/dri/card12
[    94.786] drmOpenByBusid: drmOpenMinor returns -1
[    94.786] drmOpenDevice: node name is /dev/dri/card13
[    94.789] drmOpenByBusid: drmOpenMinor returns -1
[    94.789] drmOpenDevice: node name is /dev/dri/card14
[    94.793] drmOpenByBusid: drmOpenMinor returns -1
[    94.793] drmOpenDevice: node name is /dev/dri/card15
[    94.797] drmOpenByBusid: drmOpenMinor returns -1
[    94.934] (II) NVIDIA(GPU-0): Display (DELL E198WFP (DFP-0)) does not support NVIDIA 3D
[    94.934] (II) NVIDIA(GPU-0):     Vision stereo.
[    94.940] (II) NVIDIA(0): NVIDIA GPU GeForce 8300 GS (G86) at PCI:1:0:0 (GPU-0)
[    94.940] (--) NVIDIA(0): Memory: 131072 kBytes
[    94.940] (--) NVIDIA(0): VideoBIOS: 60.86.49.00.19
[    94.940] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    94.944] (--) NVIDIA(0): Valid display device(s) on GeForce 8300 GS at PCI:1:0:0
[    94.944] (--) NVIDIA(0):     CRT-0
[    94.944] (--) NVIDIA(0):     CRT-1
[    94.944] (--) NVIDIA(0):     TV-0
[    94.944] (--) NVIDIA(0):     DELL E198WFP (DFP-0) (boot, connected)
[    94.944] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[    94.944] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[    94.944] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[    94.944] (--) NVIDIA(0): DELL E198WFP (DFP-0): 165.0 MHz maximum pixel clock
[    94.944] (--) NVIDIA(0): DELL E198WFP (DFP-0): Internal Single Link TMDS
[    94.944] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    94.944] (**) NVIDIA(0):     device DELL E198WFP (DFP-0) (Using EDID frequencies has
[    94.944] (**) NVIDIA(0):     been enabled on all display devices.)
[    94.946] (==) NVIDIA(0): 
[    94.946] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    94.946] (==) NVIDIA(0):     will be used as the requested mode.
[    94.946] (==) NVIDIA(0): 
[    94.947] (II) NVIDIA(0): Validated MetaModes:
[    94.947] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select{}"
[    94.947] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[    94.979] (--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config
[    94.979] (--) NVIDIA(0):     option
[    94.979] (--) Depth 24 pixmap format is 32 bpp
[    94.979] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[    94.986] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select{}"
[    95.012] (II) Loading extension NV-GLX
[    95.034] (==) NVIDIA(0): Disabling shared memory pixmaps
[    95.034] (==) NVIDIA(0): Backing store disabled
[    95.034] (==) NVIDIA(0): Silken mouse enabled
[    95.035] (==) NVIDIA(0): DPMS enabled
[    95.035] (II) Loading extension NV-CONTROL
[    95.035] (II) Loading extension XINERAMA
[    95.035] (WW) NVIDIA(0): Option "RandRRotation" is not used
[    95.035] (II) Loading sub module "dri2"
[    95.035] (II) LoadModule: "dri2"
[    95.035] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    95.035] (II) Module dri2: vendor="X.Org Foundation"
[    95.035] 	compiled for 1.12.4, module version = 1.2.0
[    95.035] 	ABI class: X.Org Server Extension, version 6.0
[    95.035] (II) NVIDIA(0): [DRI2] Setup complete
[    95.035] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    95.035] (--) RandR disabled
[    95.036] (II) Initializing built-in extension Generic Event Extension
[    95.036] (II) Initializing built-in extension SHAPE
[    95.036] (II) Initializing built-in extension MIT-SHM
[    95.036] (II) Initializing built-in extension XInputExtension
[    95.036] (II) Initializing built-in extension XTEST
[    95.036] (II) Initializing built-in extension BIG-REQUESTS
[    95.036] (II) Initializing built-in extension SYNC
[    95.036] (II) Initializing built-in extension XKEYBOARD
[    95.036] (II) Initializing built-in extension XC-MISC
[    95.036] (II) Initializing built-in extension SECURITY
[    95.036] (II) Initializing built-in extension XINERAMA
[    95.036] (II) Initializing built-in extension XFIXES
[    95.036] (II) Initializing built-in extension RENDER
[    95.036] (II) Initializing built-in extension RANDR
[    95.036] (II) Initializing built-in extension COMPOSITE
[    95.036] (II) Initializing built-in extension DAMAGE
[    95.036] (II) SELinux: Disabled on system
[    95.037] (II) Initializing extension GLX
[    95.083] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    95.083] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    95.083] (II) LoadModule: "evdev"
[    95.083] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    95.084] (II) Module evdev: vendor="X.Org Foundation"
[    95.084] 	compiled for 1.12.1, module version = 2.7.0
[    95.084] 	Module class: X.Org XInput Driver
[    95.084] 	ABI class: X.Org XInput driver, version 16.0
[    95.084] (II) Using input driver 'evdev' for 'Power Button'
[    95.084] (**) Power Button: always reports core events
[    95.084] (**) evdev: Power Button: Device: "/dev/input/event3"
[    95.084] (--) evdev: Power Button: Vendor 0 Product 0x1
[    95.084] (--) evdev: Power Button: Found keys
[    95.084] (II) evdev: Power Button: Configuring as keyboard
[    95.084] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    95.084] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    95.084] (**) Option "xkb_rules" "evdev"
[    95.084] (**) Option "xkb_model" "pc105"
[    95.084] (**) Option "xkb_layout" "us"
[    95.084] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    95.084] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    95.084] (II) Using input driver 'evdev' for 'Power Button'
[    95.084] (**) Power Button: always reports core events
[    95.084] (**) evdev: Power Button: Device: "/dev/input/event2"
[    95.084] (--) evdev: Power Button: Vendor 0 Product 0x1
[    95.084] (--) evdev: Power Button: Found keys
[    95.084] (II) evdev: Power Button: Configuring as keyboard
[    95.084] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[    95.084] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    95.084] (**) Option "xkb_rules" "evdev"
[    95.084] (**) Option "xkb_model" "pc105"
[    95.084] (**) Option "xkb_layout" "us"
[    95.085] (II) config/udev: Adding input device Dell Dell USB Keyboard (/dev/input/event0)
[    95.085] (**) Dell Dell USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    95.085] (II) Using input driver 'evdev' for 'Dell Dell USB Keyboard'
[    95.085] (**) Dell Dell USB Keyboard: always reports core events
[    95.085] (**) evdev: Dell Dell USB Keyboard: Device: "/dev/input/event0"
[    95.085] (--) evdev: Dell Dell USB Keyboard: Vendor 0x413c Product 0x2003
[    95.085] (--) evdev: Dell Dell USB Keyboard: Found keys
[    95.085] (II) evdev: Dell Dell USB Keyboard: Configuring as keyboard
[    95.085] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb4/4-1/4-1:1.0/input/input0/event0"
[    95.085] (II) XINPUT: Adding extended input device "Dell Dell USB Keyboard" (type: KEYBOARD, id 8)
[    95.085] (**) Option "xkb_rules" "evdev"
[    95.085] (**) Option "xkb_model" "pc105"
[    95.085] (**) Option "xkb_layout" "us"
[    95.085] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event1)
[    95.085] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    95.085] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[    95.085] (**) USB Optical Mouse: always reports core events
[    95.085] (**) evdev: USB Optical Mouse: Device: "/dev/input/event1"
[    95.085] (--) evdev: USB Optical Mouse: Vendor 0x461 Product 0x4d22
[    95.085] (--) evdev: USB Optical Mouse: Found 3 mouse buttons
[    95.085] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[    95.085] (--) evdev: USB Optical Mouse: Found relative axes
[    95.085] (--) evdev: USB Optical Mouse: Found x and y relative axes
[    95.085] (II) evdev: USB Optical Mouse: Configuring as mouse
[    95.085] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[    95.085] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    95.085] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    95.086] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb4/4-2/4-2:1.0/input/input1/event1"
[    95.086] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 9)
[    95.086] (II) evdev: USB Optical Mouse: initialized for relative axes.
[    95.086] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[    95.086] (**) USB Optical Mouse: (accel) acceleration profile 0
[    95.086] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[    95.086] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[    95.086] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[    95.086] (II) No input driver specified, ignoring this device.
[    95.086] (II) This device may have been added with another device file.
[    95.086] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[    95.086] (II) No input driver specified, ignoring this device.
[    95.086] (II) This device may have been added with another device file.
[    95.086] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event6)
[    95.086] (II) No input driver specified, ignoring this device.
[    95.086] (II) This device may have been added with another device file.
[    95.087] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[    95.087] (II) No input driver specified, ignoring this device.
[    95.087] (II) This device may have been added with another device file.


More information about the pkg-nvidia-devel mailing list