Bug#756585: nvclock: [nvclock] not work with modern cards

[YK]

Package: nvclock
Version: 0.8b4-1+b1
Severity: normal

Hi,
Sorry my bad English, I will be brief))

First:
root at aspera:~# nvclock -s
Card:           Unknown Nvidia card
Card number:    1
Memory clock:   -2147483.750 MHz
GPU clock:      -2147483.750 MHz

root at aspera:~# nvclock -i
It seems your card isn't officialy supported in NVClock yet.
The reason can be that your card is too new.
If you want to try it anyhow [DANGEROUS], use the option -f to force the setting(s).
NVClock will then assume your card is a 'normal', it might be dangerous on other cards.
Also please email the author the pci_id of the card for further investigation.
[Get that value using the -i option].

Second:

root at aspera:~# lspci -vvxxx -s 02:00.0
02:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 430] (rev a1) (prog-if 00 [VGA controller])
        Subsystem: ASUSTeK Computer Inc. Device 83b8
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 45
        Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at d8000000 (64-bit, prefetchable) [size=128M]
        Region 3: Memory at d6000000 (64-bit, prefetchable) [size=32M]
        Region 5: I/O ports at b800 [size=128]
        [virtual] Expansion ROM at fe980000 [disabled] [size=512K]
        Capabilities: [60] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
                Address: 00000000fee0300c  Data: 4142
        Capabilities: [78] Express (v2) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us
                        ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us
                        ClockPM+ Surprise- LLActRep- BwNot-
                LnkCtl: ASPM L0s L1 Enabled; RCB 128 bytes Disabled- CommClk+
                        ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
        Capabilities: [b4] Vendor Specific Information: Len=14 <?>
        Capabilities: [100 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
                        Status: NegoPending- InProgress-
        Capabilities: [128 v1] Power Budgeting <?>
	Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
        Kernel driver in use: nvidia
00: de 10 e1 0d 07 00 10 00 a1 00 00 03 00 00 80 00
10: 00 00 00 fd 0c 00 00 d8 00 00 00 00 0c 00 00 d6
20: 00 00 00 00 01 b8 00 00 00 00 00 00 43 10 b8 83
30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 00 00
40: 43 10 b8 83 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
60: 01 68 03 00 08 00 00 00 05 78 81 00 0c 30 e0 fe
70: 00 00 00 00 42 41 00 00 10 b4 02 00 e0 8d 2c 01
80: 00 29 00 00 01 2d 05 00 4b 01 01 11 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 10 00 00 00
a0: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00
b0: 00 00 00 00 09 00 14 01 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Thank for your attention.

-- System Information:
Debian Release: jessie/sid
  APT prefers testing-proposed-updates
  APT policy: (500, 'testing-proposed-updates'), (500, 'testing'), (500, 'oldstable')
Architecture: amd64 (x86_64)

Kernel: Linux 3.14-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages nvclock depends on:
ii  libc6     2.19-7
ii  libx11-6  2:1.6.2-2
ii  libxext6  2:1.3.2-1

nvclock recommends no packages.

Versions of packages nvclock suggests:
pn  nvidia-glx  <none>

-- no debconf information