[Pkg-openldap-devel] r954 - in openldap/trunk/debian: . tests
Russ Allbery
rra at alioth.debian.org
Fri Dec 21 20:59:49 UTC 2007
Author: rra
Date: 2007-12-21 20:59:49 +0000 (Fri, 21 Dec 2007)
New Revision: 954
Added:
openldap/trunk/debian/tests/check_upgradepath
Removed:
openldap/trunk/debian/check_upgradepath
Log:
Move check_upgradepath into tests with the other scripts used by
maintainers to test the packaging.
Deleted: openldap/trunk/debian/check_upgradepath
===================================================================
--- openldap/trunk/debian/check_upgradepath 2007-12-21 20:59:24 UTC (rev 953)
+++ openldap/trunk/debian/check_upgradepath 2007-12-21 20:59:49 UTC (rev 954)
@@ -1,174 +0,0 @@
-#! /bin/sh
-
-set -e
-
-# WARNING: This script is obsolete and will require a fair bit of work to get
-# working again. It assumes woody, uses debconf questions that don't exist
-# any more, and probably doesn't check everything that you would want to
-# check. Preserved just because I haven't done the work to see if puiparts
-# can now do the same thing in a cleaner way.
-
-# Setup
-: ${chroot_dir:=../chroot}
-: ${debmirror:=http://ftp.de.debian.org/debian}
-: ${proxy:=http://proxy.galaxy:3128/}
-unset LC_ALL
-unset LC_CTYPE
-unset LC_MESSAGES
-# XXX: comment out when testing new versions. Needed so libc6 does not
-# ask for restarting services.
-export DEBIAN_FRONTEND=noninteractive
-
-woodytar=$chroot_dir/woody_base.tar.gz
-
-# List our packages
-list_packages() {
- local p ver
- ver=`dpkg-parsechangelog|sed -ne 's/^Version: //p'`
- for p in `dh_listpackages`; do
- (cd .. && echo ${p}_$ver*deb)
- done
-}
-
-# Run a command inside the chroot
-
-in_target() {
- chroot $chroot_dir/woody "$@"
-}
-
-# Set a debconf variable inside the chroot
-
-debconf_set() {
- local name=$1
- shift
- cat >>$chroot_dir/woody/var/cache/debconf/config.dat <<EOF
-Name: $name
-Template: $name
-Flags: seen
-Value: $@
-
-EOF
-}
-
-# Setup a woody chroot
-
-setup_chroot() {
- # Kill an existing chroot
- rm -Rf $chroot_dir/woody
-
- # If there is a tar archive with a base system we use it
- if [ -e $woodytar ]; then
- mkdir $chroot_dir/woody
- echo -n "Unpacking system from $woodytar"
- tar -C $chroot_dir/woody -xzf $woodytar
- echo "done."
- # Otherwise we need to create a new base system and save it
- # to a tar for the next time
- else
- debootstrap woody $chroot_dir/woody $debmirror | \
- shtool prop -p "Creating base system from $debmirror"
- tar -C $chroot_dir/woody -czvf $woodytar . | \
- shtool prop -p "Saving system to $woodytar"
- fi
-
- # Install a suitable apt configuration
- echo "deb $debmirror woody main" \
- > $chroot_dir/woody/etc/apt/sources.list
- echo "Acquire::HTTP::Proxy \"$proxy\";" \
- > $chroot_dir/woody/etc/apt/apt.conf
- in_target apt-get update
- in_target mount -t proc none /proc
-
- # We don't want any debconf interaction
- #debconf_set debconf/frontend Noninteractive
-}
-
-# These are our example configurations for testing the upgrade
-
-conf_domain_or_host() {
- debconf_set slapd/fill_method auto
- debconf_set slapd/suffix_type "domain or host"
- debconf_set slapd/domain "some.example.net"
- debconf_set slapd/replicate false
- debconf_set shared/organization Some Organization
-}
-
-
-check_domain_or_host() {
- sleep 2 # wait for slapd to startup
- in_target ldapsearch -h localhost -b dc=some,dc=example,dc=net -x \
- objectclass=\*
-}
-
-conf_location() {
- debconf_set slapd/fill_method auto
- debconf_set slapd/suffix_type "location"
- debconf_set shared/locale/countrycode de
- debconf_set shared/organization "Sample Organization"
- debconf_set slapd/replicate false
- debconf_set shared/organization Some Organization
-}
-
-check_location() {
- sleep 2 # wait for slapd to startup
- in_target ldapsearch -h localhost -b "o=Some Organization, c=de" \
- -x objectclass=\*
-}
-# Install slapd inside the chroot
-
-install_slapd() {
- in_target apt-get -y install slapd ldap-utils
-}
-
-# Do an upgrade of our packages inside the chroot
-
-upgrade() {
- # Link our packages into the chroot
- for p in `list_packages`; do
- ln ../$p $chroot_dir/woody/root/
- done
-
- # Create a packages file
- (cd $chroot_dir/woody/root && dpkg-scanpackages . /dev/null >Packages)
-
- # Switch to unstable
- echo "deb $debmirror unstable main" \
- > $chroot_dir/woody/etc/apt/sources.list
- echo "deb file:/root ./" >> $chroot_dir/woody/etc/apt/sources.list
-
- # Update package lists
- in_target apt-get update
-
- # Tell our scripts to fix the config
- debconf_set slapd/fix_directory true
- debconf_set slapd/password1 foobar
- debconf_set slapd/autoconf_modules true
- debconf_set slapd/allow_ldap_v2
-
- # Do an upgrade of our packages
- in_target apt-get install -y `dh_listpackages`
-}
-
-# Checks if upgrading a woody system with slapd configured with the
-# command given works.
-
-check_upgrade() {
- setup_chroot
- conf_$1
- debconf_set slapd/password1 foobar
- debconf_set slapd/password2 foobar
- install_slapd
- check_$1
- upgrade
- check_$1
- in_target /etc/init.d/slapd stop
- in_target umount /proc
-}
-
-# Try upgrading our example setups
-
-for i in location domain_or_host; do
- check_upgrade $i
-done
-
-echo "SUCCESS testing upgrading from woody"
Copied: openldap/trunk/debian/tests/check_upgradepath (from rev 942, openldap/trunk/debian/check_upgradepath)
===================================================================
--- openldap/trunk/debian/tests/check_upgradepath (rev 0)
+++ openldap/trunk/debian/tests/check_upgradepath 2007-12-21 20:59:49 UTC (rev 954)
@@ -0,0 +1,174 @@
+#! /bin/sh
+
+set -e
+
+# WARNING: This script is obsolete and will require a fair bit of work to get
+# working again. It assumes woody, uses debconf questions that don't exist
+# any more, and probably doesn't check everything that you would want to
+# check. Preserved just because I haven't done the work to see if puiparts
+# can now do the same thing in a cleaner way.
+
+# Setup
+: ${chroot_dir:=../chroot}
+: ${debmirror:=http://ftp.de.debian.org/debian}
+: ${proxy:=http://proxy.galaxy:3128/}
+unset LC_ALL
+unset LC_CTYPE
+unset LC_MESSAGES
+# XXX: comment out when testing new versions. Needed so libc6 does not
+# ask for restarting services.
+export DEBIAN_FRONTEND=noninteractive
+
+woodytar=$chroot_dir/woody_base.tar.gz
+
+# List our packages
+list_packages() {
+ local p ver
+ ver=`dpkg-parsechangelog|sed -ne 's/^Version: //p'`
+ for p in `dh_listpackages`; do
+ (cd .. && echo ${p}_$ver*deb)
+ done
+}
+
+# Run a command inside the chroot
+
+in_target() {
+ chroot $chroot_dir/woody "$@"
+}
+
+# Set a debconf variable inside the chroot
+
+debconf_set() {
+ local name=$1
+ shift
+ cat >>$chroot_dir/woody/var/cache/debconf/config.dat <<EOF
+Name: $name
+Template: $name
+Flags: seen
+Value: $@
+
+EOF
+}
+
+# Setup a woody chroot
+
+setup_chroot() {
+ # Kill an existing chroot
+ rm -Rf $chroot_dir/woody
+
+ # If there is a tar archive with a base system we use it
+ if [ -e $woodytar ]; then
+ mkdir $chroot_dir/woody
+ echo -n "Unpacking system from $woodytar"
+ tar -C $chroot_dir/woody -xzf $woodytar
+ echo "done."
+ # Otherwise we need to create a new base system and save it
+ # to a tar for the next time
+ else
+ debootstrap woody $chroot_dir/woody $debmirror | \
+ shtool prop -p "Creating base system from $debmirror"
+ tar -C $chroot_dir/woody -czvf $woodytar . | \
+ shtool prop -p "Saving system to $woodytar"
+ fi
+
+ # Install a suitable apt configuration
+ echo "deb $debmirror woody main" \
+ > $chroot_dir/woody/etc/apt/sources.list
+ echo "Acquire::HTTP::Proxy \"$proxy\";" \
+ > $chroot_dir/woody/etc/apt/apt.conf
+ in_target apt-get update
+ in_target mount -t proc none /proc
+
+ # We don't want any debconf interaction
+ #debconf_set debconf/frontend Noninteractive
+}
+
+# These are our example configurations for testing the upgrade
+
+conf_domain_or_host() {
+ debconf_set slapd/fill_method auto
+ debconf_set slapd/suffix_type "domain or host"
+ debconf_set slapd/domain "some.example.net"
+ debconf_set slapd/replicate false
+ debconf_set shared/organization Some Organization
+}
+
+
+check_domain_or_host() {
+ sleep 2 # wait for slapd to startup
+ in_target ldapsearch -h localhost -b dc=some,dc=example,dc=net -x \
+ objectclass=\*
+}
+
+conf_location() {
+ debconf_set slapd/fill_method auto
+ debconf_set slapd/suffix_type "location"
+ debconf_set shared/locale/countrycode de
+ debconf_set shared/organization "Sample Organization"
+ debconf_set slapd/replicate false
+ debconf_set shared/organization Some Organization
+}
+
+check_location() {
+ sleep 2 # wait for slapd to startup
+ in_target ldapsearch -h localhost -b "o=Some Organization, c=de" \
+ -x objectclass=\*
+}
+# Install slapd inside the chroot
+
+install_slapd() {
+ in_target apt-get -y install slapd ldap-utils
+}
+
+# Do an upgrade of our packages inside the chroot
+
+upgrade() {
+ # Link our packages into the chroot
+ for p in `list_packages`; do
+ ln ../$p $chroot_dir/woody/root/
+ done
+
+ # Create a packages file
+ (cd $chroot_dir/woody/root && dpkg-scanpackages . /dev/null >Packages)
+
+ # Switch to unstable
+ echo "deb $debmirror unstable main" \
+ > $chroot_dir/woody/etc/apt/sources.list
+ echo "deb file:/root ./" >> $chroot_dir/woody/etc/apt/sources.list
+
+ # Update package lists
+ in_target apt-get update
+
+ # Tell our scripts to fix the config
+ debconf_set slapd/fix_directory true
+ debconf_set slapd/password1 foobar
+ debconf_set slapd/autoconf_modules true
+ debconf_set slapd/allow_ldap_v2
+
+ # Do an upgrade of our packages
+ in_target apt-get install -y `dh_listpackages`
+}
+
+# Checks if upgrading a woody system with slapd configured with the
+# command given works.
+
+check_upgrade() {
+ setup_chroot
+ conf_$1
+ debconf_set slapd/password1 foobar
+ debconf_set slapd/password2 foobar
+ install_slapd
+ check_$1
+ upgrade
+ check_$1
+ in_target /etc/init.d/slapd stop
+ in_target umount /proc
+}
+
+# Try upgrading our example setups
+
+for i in location domain_or_host; do
+ check_upgrade $i
+done
+
+echo "SUCCESS testing upgrading from woody"
Property changes on: openldap/trunk/debian/tests/check_upgradepath
___________________________________________________________________
Name: svn:executable
+ *
More information about the Pkg-openldap-devel
mailing list