[Pkg-openssl-changes] r407 - openssl/branches/lenny/ssl
Kurt Roeckx
kroeckx at alioth.debian.org
Mon Jun 8 17:43:54 UTC 2009
Author: kroeckx
Date: 2009-06-08 17:43:54 +0000 (Mon, 08 Jun 2009)
New Revision: 407
Added:
openssl/branches/lenny/ssl/s3_pkt.c
openssl/branches/lenny/ssl/ssl_err.c
Log:
Add upstream versions from 0.9.8g
Added: openssl/branches/lenny/ssl/s3_pkt.c
===================================================================
--- openssl/branches/lenny/ssl/s3_pkt.c (rev 0)
+++ openssl/branches/lenny/ssl/s3_pkt.c 2009-06-08 17:43:54 UTC (rev 407)
@@ -0,0 +1,1311 @@
+/* ssl/s3_pkt.c */
+/* Copyright (C) 1995-1998 Eric Young (eay at cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay at cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ *
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to. The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code. The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh at cryptsoft.com).
+ *
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * "This product includes cryptographic software written by
+ * Eric Young (eay at cryptsoft.com)"
+ * The word 'cryptographic' can be left out if the rouines from the library
+ * being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from
+ * the apps directory (application code) you must include an acknowledgement:
+ * "This product includes software written by Tim Hudson (tjh at cryptsoft.com)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed. i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+/* ====================================================================
+ * Copyright (c) 1998-2002 The OpenSSL Project. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ * software must display the following acknowledgment:
+ * "This product includes software developed by the OpenSSL Project
+ * for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ * endorse or promote products derived from this software without
+ * prior written permission. For written permission, please contact
+ * openssl-core at openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ * nor may "OpenSSL" appear in their names without prior written
+ * permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ * acknowledgment:
+ * "This product includes software developed by the OpenSSL Project
+ * for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay at cryptsoft.com). This product includes software written by Tim
+ * Hudson (tjh at cryptsoft.com).
+ *
+ */
+
+#include <stdio.h>
+#include <errno.h>
+#define USE_SOCKETS
+#include "ssl_locl.h"
+#include <openssl/evp.h>
+#include <openssl/buffer.h>
+
+static int do_ssl3_write(SSL *s, int type, const unsigned char *buf,
+ unsigned int len, int create_empty_fragment);
+static int ssl3_get_record(SSL *s);
+
+int ssl3_read_n(SSL *s, int n, int max, int extend)
+ {
+ /* If extend == 0, obtain new n-byte packet; if extend == 1, increase
+ * packet by another n bytes.
+ * The packet will be in the sub-array of s->s3->rbuf.buf specified
+ * by s->packet and s->packet_length.
+ * (If s->read_ahead is set, 'max' bytes may be stored in rbuf
+ * [plus s->packet_length bytes if extend == 1].)
+ */
+ int i,off,newb;
+
+ if (!extend)
+ {
+ /* start with empty packet ... */
+ if (s->s3->rbuf.left == 0)
+ s->s3->rbuf.offset = 0;
+ s->packet = s->s3->rbuf.buf + s->s3->rbuf.offset;
+ s->packet_length = 0;
+ /* ... now we can act as if 'extend' was set */
+ }
+
+ /* extend reads should not span multiple packets for DTLS */
+ if ( SSL_version(s) == DTLS1_VERSION &&
+ extend)
+ {
+ if ( s->s3->rbuf.left > 0 && n > s->s3->rbuf.left)
+ n = s->s3->rbuf.left;
+ }
+
+ /* if there is enough in the buffer from a previous read, take some */
+ if (s->s3->rbuf.left >= (int)n)
+ {
+ s->packet_length+=n;
+ s->s3->rbuf.left-=n;
+ s->s3->rbuf.offset+=n;
+ return(n);
+ }
+
+ /* else we need to read more data */
+ if (!s->read_ahead)
+ max=n;
+
+ {
+ /* avoid buffer overflow */
+ int max_max = s->s3->rbuf.len - s->packet_length;
+ if (max > max_max)
+ max = max_max;
+ }
+ if (n > max) /* does not happen */
+ {
+ SSLerr(SSL_F_SSL3_READ_N,ERR_R_INTERNAL_ERROR);
+ return -1;
+ }
+
+ off = s->packet_length;
+ newb = s->s3->rbuf.left;
+ /* Move any available bytes to front of buffer:
+ * 'off' bytes already pointed to by 'packet',
+ * 'newb' extra ones at the end */
+ if (s->packet != s->s3->rbuf.buf)
+ {
+ /* off > 0 */
+ memmove(s->s3->rbuf.buf, s->packet, off+newb);
+ s->packet = s->s3->rbuf.buf;
+ }
+
+ while (newb < n)
+ {
+ /* Now we have off+newb bytes at the front of s->s3->rbuf.buf and need
+ * to read in more until we have off+n (up to off+max if possible) */
+
+ clear_sys_error();
+ if (s->rbio != NULL)
+ {
+ s->rwstate=SSL_READING;
+ i=BIO_read(s->rbio, &(s->s3->rbuf.buf[off+newb]), max-newb);
+ }
+ else
+ {
+ SSLerr(SSL_F_SSL3_READ_N,SSL_R_READ_BIO_NOT_SET);
+ i = -1;
+ }
+
+ if (i <= 0)
+ {
+ s->s3->rbuf.left = newb;
+ return(i);
+ }
+ newb+=i;
+ }
+
+ /* done reading, now the book-keeping */
+ s->s3->rbuf.offset = off + n;
+ s->s3->rbuf.left = newb - n;
+ s->packet_length += n;
+ s->rwstate=SSL_NOTHING;
+ return(n);
+ }
+
+/* Call this to get a new input record.
+ * It will return <= 0 if more data is needed, normally due to an error
+ * or non-blocking IO.
+ * When it finishes, one packet has been decoded and can be found in
+ * ssl->s3->rrec.type - is the type of record
+ * ssl->s3->rrec.data, - data
+ * ssl->s3->rrec.length, - number of bytes
+ */
+/* used only by ssl3_read_bytes */
+static int ssl3_get_record(SSL *s)
+ {
+ int ssl_major,ssl_minor,al;
+ int enc_err,n,i,ret= -1;
+ SSL3_RECORD *rr;
+ SSL_SESSION *sess;
+ unsigned char *p;
+ unsigned char md[EVP_MAX_MD_SIZE];
+ short version;
+ unsigned int mac_size;
+ int clear=0;
+ size_t extra;
+ int decryption_failed_or_bad_record_mac = 0;
+ unsigned char *mac = NULL;
+
+ rr= &(s->s3->rrec);
+ sess=s->session;
+
+ if (s->options & SSL_OP_MICROSOFT_BIG_SSLV3_BUFFER)
+ extra=SSL3_RT_MAX_EXTRA;
+ else
+ extra=0;
+ if (extra != s->s3->rbuf.len - SSL3_RT_MAX_PACKET_SIZE)
+ {
+ /* actually likely an application error: SLS_OP_MICROSOFT_BIG_SSLV3_BUFFER
+ * set after ssl3_setup_buffers() was done */
+ SSLerr(SSL_F_SSL3_GET_RECORD, ERR_R_INTERNAL_ERROR);
+ return -1;
+ }
+
+again:
+ /* check if we have the header */
+ if ( (s->rstate != SSL_ST_READ_BODY) ||
+ (s->packet_length < SSL3_RT_HEADER_LENGTH))
+ {
+ n=ssl3_read_n(s, SSL3_RT_HEADER_LENGTH, s->s3->rbuf.len, 0);
+ if (n <= 0) return(n); /* error or non-blocking */
+ s->rstate=SSL_ST_READ_BODY;
+
+ p=s->packet;
+
+ /* Pull apart the header into the SSL3_RECORD */
+ rr->type= *(p++);
+ ssl_major= *(p++);
+ ssl_minor= *(p++);
+ version=(ssl_major<<8)|ssl_minor;
+ n2s(p,rr->length);
+
+ /* Lets check version */
+ if (!s->first_packet)
+ {
+ if (version != s->version)
+ {
+ SSLerr(SSL_F_SSL3_GET_RECORD,SSL_R_WRONG_VERSION_NUMBER);
+ /* Send back error using their
+ * version number :-) */
+ s->version=version;
+ al=SSL_AD_PROTOCOL_VERSION;
+ goto f_err;
+ }
+ }
+
+ if ((version>>8) != SSL3_VERSION_MAJOR)
+ {
+ SSLerr(SSL_F_SSL3_GET_RECORD,SSL_R_WRONG_VERSION_NUMBER);
+ goto err;
+ }
+
+ if (rr->length > SSL3_RT_MAX_ENCRYPTED_LENGTH+extra)
+ {
+ al=SSL_AD_RECORD_OVERFLOW;
+ SSLerr(SSL_F_SSL3_GET_RECORD,SSL_R_PACKET_LENGTH_TOO_LONG);
+ goto f_err;
+ }
+
+ /* now s->rstate == SSL_ST_READ_BODY */
+ }
+
+ /* s->rstate == SSL_ST_READ_BODY, get and decode the data */
+
+ if (rr->length > s->packet_length-SSL3_RT_HEADER_LENGTH)
+ {
+ /* now s->packet_length == SSL3_RT_HEADER_LENGTH */
+ i=rr->length;
+ n=ssl3_read_n(s,i,i,1);
+ if (n <= 0) return(n); /* error or non-blocking io */
+ /* now n == rr->length,
+ * and s->packet_length == SSL3_RT_HEADER_LENGTH + rr->length */
+ }
+
+ s->rstate=SSL_ST_READ_HEADER; /* set state for later operations */
+
+ /* At this point, s->packet_length == SSL3_RT_HEADER_LNGTH + rr->length,
+ * and we have that many bytes in s->packet
+ */
+ rr->input= &(s->packet[SSL3_RT_HEADER_LENGTH]);
+
+ /* ok, we can now read from 's->packet' data into 'rr'
+ * rr->input points at rr->length bytes, which
+ * need to be copied into rr->data by either
+ * the decryption or by the decompression
+ * When the data is 'copied' into the rr->data buffer,
+ * rr->input will be pointed at the new buffer */
+
+ /* We now have - encrypted [ MAC [ compressed [ plain ] ] ]
+ * rr->length bytes of encrypted compressed stuff. */
+
+ /* check is not needed I believe */
+ if (rr->length > SSL3_RT_MAX_ENCRYPTED_LENGTH+extra)
+ {
+ al=SSL_AD_RECORD_OVERFLOW;
+ SSLerr(SSL_F_SSL3_GET_RECORD,SSL_R_ENCRYPTED_LENGTH_TOO_LONG);
+ goto f_err;
+ }
+
+ /* decrypt in place in 'rr->input' */
+ rr->data=rr->input;
+
+ enc_err = s->method->ssl3_enc->enc(s,0);
+ if (enc_err <= 0)
+ {
+ if (enc_err == 0)
+ /* SSLerr() and ssl3_send_alert() have been called */
+ goto err;
+
+ /* Otherwise enc_err == -1, which indicates bad padding
+ * (rec->length has not been changed in this case).
+ * To minimize information leaked via timing, we will perform
+ * the MAC computation anyway. */
+ decryption_failed_or_bad_record_mac = 1;
+ }
+
+#ifdef TLS_DEBUG
+printf("dec %d\n",rr->length);
+{ unsigned int z; for (z=0; z<rr->length; z++) printf("%02X%c",rr->data[z],((z+1)%16)?' ':'\n'); }
+printf("\n");
+#endif
+
+ /* r->length is now the compressed data plus mac */
+ if ( (sess == NULL) ||
+ (s->enc_read_ctx == NULL) ||
+ (s->read_hash == NULL))
+ clear=1;
+
+ if (!clear)
+ {
+ mac_size=EVP_MD_size(s->read_hash);
+
+ if (rr->length > SSL3_RT_MAX_COMPRESSED_LENGTH+extra+mac_size)
+ {
+#if 0 /* OK only for stream ciphers (then rr->length is visible from ciphertext anyway) */
+ al=SSL_AD_RECORD_OVERFLOW;
+ SSLerr(SSL_F_SSL3_GET_RECORD,SSL_R_PRE_MAC_LENGTH_TOO_LONG);
+ goto f_err;
+#else
+ decryption_failed_or_bad_record_mac = 1;
+#endif
+ }
+ /* check the MAC for rr->input (it's in mac_size bytes at the tail) */
+ if (rr->length >= mac_size)
+ {
+ rr->length -= mac_size;
+ mac = &rr->data[rr->length];
+ }
+ else
+ {
+ /* record (minus padding) is too short to contain a MAC */
+#if 0 /* OK only for stream ciphers */
+ al=SSL_AD_DECODE_ERROR;
+ SSLerr(SSL_F_SSL3_GET_RECORD,SSL_R_LENGTH_TOO_SHORT);
+ goto f_err;
+#else
+ decryption_failed_or_bad_record_mac = 1;
+ rr->length = 0;
+#endif
+ }
+ i=s->method->ssl3_enc->mac(s,md,0);
+ if (mac == NULL || memcmp(md, mac, mac_size) != 0)
+ {
+ decryption_failed_or_bad_record_mac = 1;
+ }
+ }
+
+ if (decryption_failed_or_bad_record_mac)
+ {
+ /* A separate 'decryption_failed' alert was introduced with TLS 1.0,
+ * SSL 3.0 only has 'bad_record_mac'. But unless a decryption
+ * failure is directly visible from the ciphertext anyway,
+ * we should not reveal which kind of error occured -- this
+ * might become visible to an attacker (e.g. via a logfile) */
+ al=SSL_AD_BAD_RECORD_MAC;
+ SSLerr(SSL_F_SSL3_GET_RECORD,SSL_R_DECRYPTION_FAILED_OR_BAD_RECORD_MAC);
+ goto f_err;
+ }
+
+ /* r->length is now just compressed */
+ if (s->expand != NULL)
+ {
+ if (rr->length > SSL3_RT_MAX_COMPRESSED_LENGTH+extra)
+ {
+ al=SSL_AD_RECORD_OVERFLOW;
+ SSLerr(SSL_F_SSL3_GET_RECORD,SSL_R_COMPRESSED_LENGTH_TOO_LONG);
+ goto f_err;
+ }
+ if (!ssl3_do_uncompress(s))
+ {
+ al=SSL_AD_DECOMPRESSION_FAILURE;
+ SSLerr(SSL_F_SSL3_GET_RECORD,SSL_R_BAD_DECOMPRESSION);
+ goto f_err;
+ }
+ }
+
+ if (rr->length > SSL3_RT_MAX_PLAIN_LENGTH+extra)
+ {
+ al=SSL_AD_RECORD_OVERFLOW;
+ SSLerr(SSL_F_SSL3_GET_RECORD,SSL_R_DATA_LENGTH_TOO_LONG);
+ goto f_err;
+ }
+
+ rr->off=0;
+ /* So at this point the following is true
+ * ssl->s3->rrec.type is the type of record
+ * ssl->s3->rrec.length == number of bytes in record
+ * ssl->s3->rrec.off == offset to first valid byte
+ * ssl->s3->rrec.data == where to take bytes from, increment
+ * after use :-).
+ */
+
+ /* we have pulled in a full packet so zero things */
+ s->packet_length=0;
+
+ /* just read a 0 length packet */
+ if (rr->length == 0) goto again;
+
+ return(1);
+
+f_err:
+ ssl3_send_alert(s,SSL3_AL_FATAL,al);
+err:
+ return(ret);
+ }
+
+int ssl3_do_uncompress(SSL *ssl)
+ {
+#ifndef OPENSSL_NO_COMP
+ int i;
+ SSL3_RECORD *rr;
+
+ rr= &(ssl->s3->rrec);
+ i=COMP_expand_block(ssl->expand,rr->comp,
+ SSL3_RT_MAX_PLAIN_LENGTH,rr->data,(int)rr->length);
+ if (i < 0)
+ return(0);
+ else
+ rr->length=i;
+ rr->data=rr->comp;
+#endif
+ return(1);
+ }
+
+int ssl3_do_compress(SSL *ssl)
+ {
+#ifndef OPENSSL_NO_COMP
+ int i;
+ SSL3_RECORD *wr;
+
+ wr= &(ssl->s3->wrec);
+ i=COMP_compress_block(ssl->compress,wr->data,
+ SSL3_RT_MAX_COMPRESSED_LENGTH,
+ wr->input,(int)wr->length);
+ if (i < 0)
+ return(0);
+ else
+ wr->length=i;
+
+ wr->input=wr->data;
+#endif
+ return(1);
+ }
+
+/* Call this to write data in records of type 'type'
+ * It will return <= 0 if not all data has been sent or non-blocking IO.
+ */
+int ssl3_write_bytes(SSL *s, int type, const void *buf_, int len)
+ {
+ const unsigned char *buf=buf_;
+ unsigned int tot,n,nw;
+ int i;
+
+ s->rwstate=SSL_NOTHING;
+ tot=s->s3->wnum;
+ s->s3->wnum=0;
+
+ if (SSL_in_init(s) && !s->in_handshake)
+ {
+ i=s->handshake_func(s);
+ if (i < 0) return(i);
+ if (i == 0)
+ {
+ SSLerr(SSL_F_SSL3_WRITE_BYTES,SSL_R_SSL_HANDSHAKE_FAILURE);
+ return -1;
+ }
+ }
+
+ n=(len-tot);
+ for (;;)
+ {
+ if (n > SSL3_RT_MAX_PLAIN_LENGTH)
+ nw=SSL3_RT_MAX_PLAIN_LENGTH;
+ else
+ nw=n;
+
+ i=do_ssl3_write(s, type, &(buf[tot]), nw, 0);
+ if (i <= 0)
+ {
+ s->s3->wnum=tot;
+ return i;
+ }
+
+ if ((i == (int)n) ||
+ (type == SSL3_RT_APPLICATION_DATA &&
+ (s->mode & SSL_MODE_ENABLE_PARTIAL_WRITE)))
+ {
+ /* next chunk of data should get another prepended empty fragment
+ * in ciphersuites with known-IV weakness: */
+ s->s3->empty_fragment_done = 0;
+
+ return tot+i;
+ }
+
+ n-=i;
+ tot+=i;
+ }
+ }
+
+static int do_ssl3_write(SSL *s, int type, const unsigned char *buf,
+ unsigned int len, int create_empty_fragment)
+ {
+ unsigned char *p,*plen;
+ int i,mac_size,clear=0;
+ int prefix_len = 0;
+ SSL3_RECORD *wr;
+ SSL3_BUFFER *wb;
+ SSL_SESSION *sess;
+
+ /* first check if there is a SSL3_BUFFER still being written
+ * out. This will happen with non blocking IO */
+ if (s->s3->wbuf.left != 0)
+ return(ssl3_write_pending(s,type,buf,len));
+
+ /* If we have an alert to send, lets send it */
+ if (s->s3->alert_dispatch)
+ {
+ i=s->method->ssl_dispatch_alert(s);
+ if (i <= 0)
+ return(i);
+ /* if it went, fall through and send more stuff */
+ }
+
+ if (len == 0 && !create_empty_fragment)
+ return 0;
+
+ wr= &(s->s3->wrec);
+ wb= &(s->s3->wbuf);
+ sess=s->session;
+
+ if ( (sess == NULL) ||
+ (s->enc_write_ctx == NULL) ||
+ (s->write_hash == NULL))
+ clear=1;
+
+ if (clear)
+ mac_size=0;
+ else
+ mac_size=EVP_MD_size(s->write_hash);
+
+ /* 'create_empty_fragment' is true only when this function calls itself */
+ if (!clear && !create_empty_fragment && !s->s3->empty_fragment_done)
+ {
+ /* countermeasure against known-IV weakness in CBC ciphersuites
+ * (see http://www.openssl.org/~bodo/tls-cbc.txt) */
+
+ if (s->s3->need_empty_fragments && type == SSL3_RT_APPLICATION_DATA)
+ {
+ /* recursive function call with 'create_empty_fragment' set;
+ * this prepares and buffers the data for an empty fragment
+ * (these 'prefix_len' bytes are sent out later
+ * together with the actual payload) */
+ prefix_len = do_ssl3_write(s, type, buf, 0, 1);
+ if (prefix_len <= 0)
+ goto err;
+
+ if (s->s3->wbuf.len < (size_t)prefix_len + SSL3_RT_MAX_PACKET_SIZE)
+ {
+ /* insufficient space */
+ SSLerr(SSL_F_DO_SSL3_WRITE, ERR_R_INTERNAL_ERROR);
+ goto err;
+ }
+ }
+
+ s->s3->empty_fragment_done = 1;
+ }
+
+ p = wb->buf + prefix_len;
+
+ /* write the header */
+
+ *(p++)=type&0xff;
+ wr->type=type;
+
+ *(p++)=(s->version>>8);
+ *(p++)=s->version&0xff;
+
+ /* field where we are to write out packet length */
+ plen=p;
+ p+=2;
+
+ /* lets setup the record stuff. */
+ wr->data=p;
+ wr->length=(int)len;
+ wr->input=(unsigned char *)buf;
+
+ /* we now 'read' from wr->input, wr->length bytes into
+ * wr->data */
+
+ /* first we compress */
+ if (s->compress != NULL)
+ {
+ if (!ssl3_do_compress(s))
+ {
+ SSLerr(SSL_F_DO_SSL3_WRITE,SSL_R_COMPRESSION_FAILURE);
+ goto err;
+ }
+ }
+ else
+ {
+ memcpy(wr->data,wr->input,wr->length);
+ wr->input=wr->data;
+ }
+
+ /* we should still have the output to wr->data and the input
+ * from wr->input. Length should be wr->length.
+ * wr->data still points in the wb->buf */
+
+ if (mac_size != 0)
+ {
+ s->method->ssl3_enc->mac(s,&(p[wr->length]),1);
+ wr->length+=mac_size;
+ wr->input=p;
+ wr->data=p;
+ }
+
+ /* ssl3_enc can only have an error on read */
+ s->method->ssl3_enc->enc(s,1);
+
+ /* record length after mac and block padding */
+ s2n(wr->length,plen);
+
+ /* we should now have
+ * wr->data pointing to the encrypted data, which is
+ * wr->length long */
+ wr->type=type; /* not needed but helps for debugging */
+ wr->length+=SSL3_RT_HEADER_LENGTH;
+
+ if (create_empty_fragment)
+ {
+ /* we are in a recursive call;
+ * just return the length, don't write out anything here
+ */
+ return wr->length;
+ }
+
+ /* now let's set up wb */
+ wb->left = prefix_len + wr->length;
+ wb->offset = 0;
+
+ /* memorize arguments so that ssl3_write_pending can detect bad write retries later */
+ s->s3->wpend_tot=len;
+ s->s3->wpend_buf=buf;
+ s->s3->wpend_type=type;
+ s->s3->wpend_ret=len;
+
+ /* we now just need to write the buffer */
+ return ssl3_write_pending(s,type,buf,len);
+err:
+ return -1;
+ }
+
+/* if s->s3->wbuf.left != 0, we need to call this */
+int ssl3_write_pending(SSL *s, int type, const unsigned char *buf,
+ unsigned int len)
+ {
+ int i;
+
+/* XXXX */
+ if ((s->s3->wpend_tot > (int)len)
+ || ((s->s3->wpend_buf != buf) &&
+ !(s->mode & SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER))
+ || (s->s3->wpend_type != type))
+ {
+ SSLerr(SSL_F_SSL3_WRITE_PENDING,SSL_R_BAD_WRITE_RETRY);
+ return(-1);
+ }
+
+ for (;;)
+ {
+ clear_sys_error();
+ if (s->wbio != NULL)
+ {
+ s->rwstate=SSL_WRITING;
+ i=BIO_write(s->wbio,
+ (char *)&(s->s3->wbuf.buf[s->s3->wbuf.offset]),
+ (unsigned int)s->s3->wbuf.left);
+ }
+ else
+ {
+ SSLerr(SSL_F_SSL3_WRITE_PENDING,SSL_R_BIO_NOT_SET);
+ i= -1;
+ }
+ if (i == s->s3->wbuf.left)
+ {
+ s->s3->wbuf.left=0;
+ s->rwstate=SSL_NOTHING;
+ return(s->s3->wpend_ret);
+ }
+ else if (i <= 0)
+ return(i);
+ s->s3->wbuf.offset+=i;
+ s->s3->wbuf.left-=i;
+ }
+ }
+
+/* Return up to 'len' payload bytes received in 'type' records.
+ * 'type' is one of the following:
+ *
+ * - SSL3_RT_HANDSHAKE (when ssl3_get_message calls us)
+ * - SSL3_RT_APPLICATION_DATA (when ssl3_read calls us)
+ * - 0 (during a shutdown, no data has to be returned)
+ *
+ * If we don't have stored data to work from, read a SSL/TLS record first
+ * (possibly multiple records if we still don't have anything to return).
+ *
+ * This function must handle any surprises the peer may have for us, such as
+ * Alert records (e.g. close_notify), ChangeCipherSpec records (not really
+ * a surprise, but handled as if it were), or renegotiation requests.
+ * Also if record payloads contain fragments too small to process, we store
+ * them until there is enough for the respective protocol (the record protocol
+ * may use arbitrary fragmentation and even interleaving):
+ * Change cipher spec protocol
+ * just 1 byte needed, no need for keeping anything stored
+ * Alert protocol
+ * 2 bytes needed (AlertLevel, AlertDescription)
+ * Handshake protocol
+ * 4 bytes needed (HandshakeType, uint24 length) -- we just have
+ * to detect unexpected Client Hello and Hello Request messages
+ * here, anything else is handled by higher layers
+ * Application data protocol
+ * none of our business
+ */
+int ssl3_read_bytes(SSL *s, int type, unsigned char *buf, int len, int peek)
+ {
+ int al,i,j,ret;
+ unsigned int n;
+ SSL3_RECORD *rr;
+ void (*cb)(const SSL *ssl,int type2,int val)=NULL;
+
+ if (s->s3->rbuf.buf == NULL) /* Not initialized yet */
+ if (!ssl3_setup_buffers(s))
+ return(-1);
+
+ if ((type && (type != SSL3_RT_APPLICATION_DATA) && (type != SSL3_RT_HANDSHAKE) && type) ||
+ (peek && (type != SSL3_RT_APPLICATION_DATA)))
+ {
+ SSLerr(SSL_F_SSL3_READ_BYTES, ERR_R_INTERNAL_ERROR);
+ return -1;
+ }
+
+ if ((type == SSL3_RT_HANDSHAKE) && (s->s3->handshake_fragment_len > 0))
+ /* (partially) satisfy request from storage */
+ {
+ unsigned char *src = s->s3->handshake_fragment;
+ unsigned char *dst = buf;
+ unsigned int k;
+
+ /* peek == 0 */
+ n = 0;
+ while ((len > 0) && (s->s3->handshake_fragment_len > 0))
+ {
+ *dst++ = *src++;
+ len--; s->s3->handshake_fragment_len--;
+ n++;
+ }
+ /* move any remaining fragment bytes: */
+ for (k = 0; k < s->s3->handshake_fragment_len; k++)
+ s->s3->handshake_fragment[k] = *src++;
+ return n;
+ }
+
+ /* Now s->s3->handshake_fragment_len == 0 if type == SSL3_RT_HANDSHAKE. */
+
+ if (!s->in_handshake && SSL_in_init(s))
+ {
+ /* type == SSL3_RT_APPLICATION_DATA */
+ i=s->handshake_func(s);
+ if (i < 0) return(i);
+ if (i == 0)
+ {
+ SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_SSL_HANDSHAKE_FAILURE);
+ return(-1);
+ }
+ }
+start:
+ s->rwstate=SSL_NOTHING;
+
+ /* s->s3->rrec.type - is the type of record
+ * s->s3->rrec.data, - data
+ * s->s3->rrec.off, - offset into 'data' for next read
+ * s->s3->rrec.length, - number of bytes. */
+ rr = &(s->s3->rrec);
+
+ /* get new packet if necessary */
+ if ((rr->length == 0) || (s->rstate == SSL_ST_READ_BODY))
+ {
+ ret=ssl3_get_record(s);
+ if (ret <= 0) return(ret);
+ }
+
+ /* we now have a packet which can be read and processed */
+
+ if (s->s3->change_cipher_spec /* set when we receive ChangeCipherSpec,
+ * reset by ssl3_get_finished */
+ && (rr->type != SSL3_RT_HANDSHAKE))
+ {
+ al=SSL_AD_UNEXPECTED_MESSAGE;
+ SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_DATA_BETWEEN_CCS_AND_FINISHED);
+ goto f_err;
+ }
+
+ /* If the other end has shut down, throw anything we read away
+ * (even in 'peek' mode) */
+ if (s->shutdown & SSL_RECEIVED_SHUTDOWN)
+ {
+ rr->length=0;
+ s->rwstate=SSL_NOTHING;
+ return(0);
+ }
+
+
+ if (type == rr->type) /* SSL3_RT_APPLICATION_DATA or SSL3_RT_HANDSHAKE */
+ {
+ /* make sure that we are not getting application data when we
+ * are doing a handshake for the first time */
+ if (SSL_in_init(s) && (type == SSL3_RT_APPLICATION_DATA) &&
+ (s->enc_read_ctx == NULL))
+ {
+ al=SSL_AD_UNEXPECTED_MESSAGE;
+ SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_APP_DATA_IN_HANDSHAKE);
+ goto f_err;
+ }
+
+ if (len <= 0) return(len);
+
+ if ((unsigned int)len > rr->length)
+ n = rr->length;
+ else
+ n = (unsigned int)len;
+
+ memcpy(buf,&(rr->data[rr->off]),n);
+ if (!peek)
+ {
+ rr->length-=n;
+ rr->off+=n;
+ if (rr->length == 0)
+ {
+ s->rstate=SSL_ST_READ_HEADER;
+ rr->off=0;
+ }
+ }
+ return(n);
+ }
+
+
+ /* If we get here, then type != rr->type; if we have a handshake
+ * message, then it was unexpected (Hello Request or Client Hello). */
+
+ /* In case of record types for which we have 'fragment' storage,
+ * fill that so that we can process the data at a fixed place.
+ */
+ {
+ unsigned int dest_maxlen = 0;
+ unsigned char *dest = NULL;
+ unsigned int *dest_len = NULL;
+
+ if (rr->type == SSL3_RT_HANDSHAKE)
+ {
+ dest_maxlen = sizeof s->s3->handshake_fragment;
+ dest = s->s3->handshake_fragment;
+ dest_len = &s->s3->handshake_fragment_len;
+ }
+ else if (rr->type == SSL3_RT_ALERT)
+ {
+ dest_maxlen = sizeof s->s3->alert_fragment;
+ dest = s->s3->alert_fragment;
+ dest_len = &s->s3->alert_fragment_len;
+ }
+
+ if (dest_maxlen > 0)
+ {
+ n = dest_maxlen - *dest_len; /* available space in 'dest' */
+ if (rr->length < n)
+ n = rr->length; /* available bytes */
+
+ /* now move 'n' bytes: */
+ while (n-- > 0)
+ {
+ dest[(*dest_len)++] = rr->data[rr->off++];
+ rr->length--;
+ }
+
+ if (*dest_len < dest_maxlen)
+ goto start; /* fragment was too small */
+ }
+ }
+
+ /* s->s3->handshake_fragment_len == 4 iff rr->type == SSL3_RT_HANDSHAKE;
+ * s->s3->alert_fragment_len == 2 iff rr->type == SSL3_RT_ALERT.
+ * (Possibly rr is 'empty' now, i.e. rr->length may be 0.) */
+
+ /* If we are a client, check for an incoming 'Hello Request': */
+ if ((!s->server) &&
+ (s->s3->handshake_fragment_len >= 4) &&
+ (s->s3->handshake_fragment[0] == SSL3_MT_HELLO_REQUEST) &&
+ (s->session != NULL) && (s->session->cipher != NULL))
+ {
+ s->s3->handshake_fragment_len = 0;
+
+ if ((s->s3->handshake_fragment[1] != 0) ||
+ (s->s3->handshake_fragment[2] != 0) ||
+ (s->s3->handshake_fragment[3] != 0))
+ {
+ al=SSL_AD_DECODE_ERROR;
+ SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_BAD_HELLO_REQUEST);
+ goto f_err;
+ }
+
+ if (s->msg_callback)
+ s->msg_callback(0, s->version, SSL3_RT_HANDSHAKE, s->s3->handshake_fragment, 4, s, s->msg_callback_arg);
+
+ if (SSL_is_init_finished(s) &&
+ !(s->s3->flags & SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS) &&
+ !s->s3->renegotiate)
+ {
+ ssl3_renegotiate(s);
+ if (ssl3_renegotiate_check(s))
+ {
+ i=s->handshake_func(s);
+ if (i < 0) return(i);
+ if (i == 0)
+ {
+ SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_SSL_HANDSHAKE_FAILURE);
+ return(-1);
+ }
+
+ if (!(s->mode & SSL_MODE_AUTO_RETRY))
+ {
+ if (s->s3->rbuf.left == 0) /* no read-ahead left? */
+ {
+ BIO *bio;
+ /* In the case where we try to read application data,
+ * but we trigger an SSL handshake, we return -1 with
+ * the retry option set. Otherwise renegotiation may
+ * cause nasty problems in the blocking world */
+ s->rwstate=SSL_READING;
+ bio=SSL_get_rbio(s);
+ BIO_clear_retry_flags(bio);
+ BIO_set_retry_read(bio);
+ return(-1);
+ }
+ }
+ }
+ }
+ /* we either finished a handshake or ignored the request,
+ * now try again to obtain the (application) data we were asked for */
+ goto start;
+ }
+
+ if (s->s3->alert_fragment_len >= 2)
+ {
+ int alert_level = s->s3->alert_fragment[0];
+ int alert_descr = s->s3->alert_fragment[1];
+
+ s->s3->alert_fragment_len = 0;
+
+ if (s->msg_callback)
+ s->msg_callback(0, s->version, SSL3_RT_ALERT, s->s3->alert_fragment, 2, s, s->msg_callback_arg);
+
+ if (s->info_callback != NULL)
+ cb=s->info_callback;
+ else if (s->ctx->info_callback != NULL)
+ cb=s->ctx->info_callback;
+
+ if (cb != NULL)
+ {
+ j = (alert_level << 8) | alert_descr;
+ cb(s, SSL_CB_READ_ALERT, j);
+ }
+
+ if (alert_level == 1) /* warning */
+ {
+ s->s3->warn_alert = alert_descr;
+ if (alert_descr == SSL_AD_CLOSE_NOTIFY)
+ {
+ s->shutdown |= SSL_RECEIVED_SHUTDOWN;
+ return(0);
+ }
+ }
+ else if (alert_level == 2) /* fatal */
+ {
+ char tmp[16];
+
+ s->rwstate=SSL_NOTHING;
+ s->s3->fatal_alert = alert_descr;
+ SSLerr(SSL_F_SSL3_READ_BYTES, SSL_AD_REASON_OFFSET + alert_descr);
+ BIO_snprintf(tmp,sizeof tmp,"%d",alert_descr);
+ ERR_add_error_data(2,"SSL alert number ",tmp);
+ s->shutdown|=SSL_RECEIVED_SHUTDOWN;
+ SSL_CTX_remove_session(s->ctx,s->session);
+ return(0);
+ }
+ else
+ {
+ al=SSL_AD_ILLEGAL_PARAMETER;
+ SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_UNKNOWN_ALERT_TYPE);
+ goto f_err;
+ }
+
+ goto start;
+ }
+
+ if (s->shutdown & SSL_SENT_SHUTDOWN) /* but we have not received a shutdown */
+ {
+ s->rwstate=SSL_NOTHING;
+ rr->length=0;
+ return(0);
+ }
+
+ if (rr->type == SSL3_RT_CHANGE_CIPHER_SPEC)
+ {
+ /* 'Change Cipher Spec' is just a single byte, so we know
+ * exactly what the record payload has to look like */
+ if ( (rr->length != 1) || (rr->off != 0) ||
+ (rr->data[0] != SSL3_MT_CCS))
+ {
+ al=SSL_AD_ILLEGAL_PARAMETER;
+ SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_BAD_CHANGE_CIPHER_SPEC);
+ goto f_err;
+ }
+
+ /* Check we have a cipher to change to */
+ if (s->s3->tmp.new_cipher == NULL)
+ {
+ al=SSL_AD_UNEXPECTED_MESSAGE;
+ SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_CCS_RECEIVED_EARLY);
+ goto f_err;
+ }
+
+ rr->length=0;
+
+ if (s->msg_callback)
+ s->msg_callback(0, s->version, SSL3_RT_CHANGE_CIPHER_SPEC, rr->data, 1, s, s->msg_callback_arg);
+
+ s->s3->change_cipher_spec=1;
+ if (!ssl3_do_change_cipher_spec(s))
+ goto err;
+ else
+ goto start;
+ }
+
+ /* Unexpected handshake message (Client Hello, or protocol violation) */
+ if ((s->s3->handshake_fragment_len >= 4) && !s->in_handshake)
+ {
+ if (((s->state&SSL_ST_MASK) == SSL_ST_OK) &&
+ !(s->s3->flags & SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS))
+ {
+#if 0 /* worked only because C operator preferences are not as expected (and
+ * because this is not really needed for clients except for detecting
+ * protocol violations): */
+ s->state=SSL_ST_BEFORE|(s->server)
+ ?SSL_ST_ACCEPT
+ :SSL_ST_CONNECT;
+#else
+ s->state = s->server ? SSL_ST_ACCEPT : SSL_ST_CONNECT;
+#endif
+ s->new_session=1;
+ }
+ i=s->handshake_func(s);
+ if (i < 0) return(i);
+ if (i == 0)
+ {
+ SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_SSL_HANDSHAKE_FAILURE);
+ return(-1);
+ }
+
+ if (!(s->mode & SSL_MODE_AUTO_RETRY))
+ {
+ if (s->s3->rbuf.left == 0) /* no read-ahead left? */
+ {
+ BIO *bio;
+ /* In the case where we try to read application data,
+ * but we trigger an SSL handshake, we return -1 with
+ * the retry option set. Otherwise renegotiation may
+ * cause nasty problems in the blocking world */
+ s->rwstate=SSL_READING;
+ bio=SSL_get_rbio(s);
+ BIO_clear_retry_flags(bio);
+ BIO_set_retry_read(bio);
+ return(-1);
+ }
+ }
+ goto start;
+ }
+
+ switch (rr->type)
+ {
+ default:
+#ifndef OPENSSL_NO_TLS
+ /* TLS just ignores unknown message types */
+ if (s->version == TLS1_VERSION)
+ {
+ rr->length = 0;
+ goto start;
+ }
+#endif
+ al=SSL_AD_UNEXPECTED_MESSAGE;
+ SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_UNEXPECTED_RECORD);
+ goto f_err;
+ case SSL3_RT_CHANGE_CIPHER_SPEC:
+ case SSL3_RT_ALERT:
+ case SSL3_RT_HANDSHAKE:
+ /* we already handled all of these, with the possible exception
+ * of SSL3_RT_HANDSHAKE when s->in_handshake is set, but that
+ * should not happen when type != rr->type */
+ al=SSL_AD_UNEXPECTED_MESSAGE;
+ SSLerr(SSL_F_SSL3_READ_BYTES,ERR_R_INTERNAL_ERROR);
+ goto f_err;
+ case SSL3_RT_APPLICATION_DATA:
+ /* At this point, we were expecting handshake data,
+ * but have application data. If the library was
+ * running inside ssl3_read() (i.e. in_read_app_data
+ * is set) and it makes sense to read application data
+ * at this point (session renegotiation not yet started),
+ * we will indulge it.
+ */
+ if (s->s3->in_read_app_data &&
+ (s->s3->total_renegotiations != 0) &&
+ ((
+ (s->state & SSL_ST_CONNECT) &&
+ (s->state >= SSL3_ST_CW_CLNT_HELLO_A) &&
+ (s->state <= SSL3_ST_CR_SRVR_HELLO_A)
+ ) || (
+ (s->state & SSL_ST_ACCEPT) &&
+ (s->state <= SSL3_ST_SW_HELLO_REQ_A) &&
+ (s->state >= SSL3_ST_SR_CLNT_HELLO_A)
+ )
+ ))
+ {
+ s->s3->in_read_app_data=2;
+ return(-1);
+ }
+ else
+ {
+ al=SSL_AD_UNEXPECTED_MESSAGE;
+ SSLerr(SSL_F_SSL3_READ_BYTES,SSL_R_UNEXPECTED_RECORD);
+ goto f_err;
+ }
+ }
+ /* not reached */
+
+f_err:
+ ssl3_send_alert(s,SSL3_AL_FATAL,al);
+err:
+ return(-1);
+ }
+
+int ssl3_do_change_cipher_spec(SSL *s)
+ {
+ int i;
+ const char *sender;
+ int slen;
+
+ if (s->state & SSL_ST_ACCEPT)
+ i=SSL3_CHANGE_CIPHER_SERVER_READ;
+ else
+ i=SSL3_CHANGE_CIPHER_CLIENT_READ;
+
+ if (s->s3->tmp.key_block == NULL)
+ {
+ s->session->cipher=s->s3->tmp.new_cipher;
+ if (!s->method->ssl3_enc->setup_key_block(s)) return(0);
+ }
+
+ if (!s->method->ssl3_enc->change_cipher_state(s,i))
+ return(0);
+
+ /* we have to record the message digest at
+ * this point so we can get it before we read
+ * the finished message */
+ if (s->state & SSL_ST_CONNECT)
+ {
+ sender=s->method->ssl3_enc->server_finished_label;
+ slen=s->method->ssl3_enc->server_finished_label_len;
+ }
+ else
+ {
+ sender=s->method->ssl3_enc->client_finished_label;
+ slen=s->method->ssl3_enc->client_finished_label_len;
+ }
+
+ s->s3->tmp.peer_finish_md_len = s->method->ssl3_enc->final_finish_mac(s,
+ &(s->s3->finish_dgst1),
+ &(s->s3->finish_dgst2),
+ sender,slen,s->s3->tmp.peer_finish_md);
+
+ return(1);
+ }
+
+void ssl3_send_alert(SSL *s, int level, int desc)
+ {
+ /* Map tls/ssl alert value to correct one */
+ desc=s->method->ssl3_enc->alert_value(desc);
+ if (s->version == SSL3_VERSION && desc == SSL_AD_PROTOCOL_VERSION)
+ desc = SSL_AD_HANDSHAKE_FAILURE; /* SSL 3.0 does not have protocol_version alerts */
+ if (desc < 0) return;
+ /* If a fatal one, remove from cache */
+ if ((level == 2) && (s->session != NULL))
+ SSL_CTX_remove_session(s->ctx,s->session);
+
+ s->s3->alert_dispatch=1;
+ s->s3->send_alert[0]=level;
+ s->s3->send_alert[1]=desc;
+ if (s->s3->wbuf.left == 0) /* data still being written out? */
+ s->method->ssl_dispatch_alert(s);
+ /* else data is still being written out, we will get written
+ * some time in the future */
+ }
+
+int ssl3_dispatch_alert(SSL *s)
+ {
+ int i,j;
+ void (*cb)(const SSL *ssl,int type,int val)=NULL;
+
+ s->s3->alert_dispatch=0;
+ i = do_ssl3_write(s, SSL3_RT_ALERT, &s->s3->send_alert[0], 2, 0);
+ if (i <= 0)
+ {
+ s->s3->alert_dispatch=1;
+ }
+ else
+ {
+ /* Alert sent to BIO. If it is important, flush it now.
+ * If the message does not get sent due to non-blocking IO,
+ * we will not worry too much. */
+ if (s->s3->send_alert[0] == SSL3_AL_FATAL)
+ (void)BIO_flush(s->wbio);
+
+ if (s->msg_callback)
+ s->msg_callback(1, s->version, SSL3_RT_ALERT, s->s3->send_alert, 2, s, s->msg_callback_arg);
+
+ if (s->info_callback != NULL)
+ cb=s->info_callback;
+ else if (s->ctx->info_callback != NULL)
+ cb=s->ctx->info_callback;
+
+ if (cb != NULL)
+ {
+ j=(s->s3->send_alert[0]<<8)|s->s3->send_alert[1];
+ cb(s,SSL_CB_WRITE_ALERT,j);
+ }
+ }
+ return(i);
+ }
Added: openssl/branches/lenny/ssl/ssl_err.c
===================================================================
--- openssl/branches/lenny/ssl/ssl_err.c (rev 0)
+++ openssl/branches/lenny/ssl/ssl_err.c 2009-06-08 17:43:54 UTC (rev 407)
@@ -0,0 +1,512 @@
+/* ssl/ssl_err.c */
+/* ====================================================================
+ * Copyright (c) 1999-2007 The OpenSSL Project. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ * software must display the following acknowledgment:
+ * "This product includes software developed by the OpenSSL Project
+ * for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ * endorse or promote products derived from this software without
+ * prior written permission. For written permission, please contact
+ * openssl-core at OpenSSL.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ * nor may "OpenSSL" appear in their names without prior written
+ * permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ * acknowledgment:
+ * "This product includes software developed by the OpenSSL Project
+ * for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay at cryptsoft.com). This product includes software written by Tim
+ * Hudson (tjh at cryptsoft.com).
+ *
+ */
+
+/* NOTE: this file was auto generated by the mkerr.pl script: any changes
+ * made to it will be overwritten when the script next updates this file,
+ * only reason strings will be preserved.
+ */
+
+#include <stdio.h>
+#include <openssl/err.h>
+#include <openssl/ssl.h>
+
+/* BEGIN ERROR CODES */
+#ifndef OPENSSL_NO_ERR
+
+#define ERR_FUNC(func) ERR_PACK(ERR_LIB_SSL,func,0)
+#define ERR_REASON(reason) ERR_PACK(ERR_LIB_SSL,0,reason)
+
+static ERR_STRING_DATA SSL_str_functs[]=
+ {
+{ERR_FUNC(SSL_F_CLIENT_CERTIFICATE), "CLIENT_CERTIFICATE"},
+{ERR_FUNC(SSL_F_CLIENT_FINISHED), "CLIENT_FINISHED"},
+{ERR_FUNC(SSL_F_CLIENT_HELLO), "CLIENT_HELLO"},
+{ERR_FUNC(SSL_F_CLIENT_MASTER_KEY), "CLIENT_MASTER_KEY"},
+{ERR_FUNC(SSL_F_D2I_SSL_SESSION), "d2i_SSL_SESSION"},
+{ERR_FUNC(SSL_F_DO_DTLS1_WRITE), "DO_DTLS1_WRITE"},
+{ERR_FUNC(SSL_F_DO_SSL3_WRITE), "DO_SSL3_WRITE"},
+{ERR_FUNC(SSL_F_DTLS1_ACCEPT), "DTLS1_ACCEPT"},
+{ERR_FUNC(SSL_F_DTLS1_BUFFER_RECORD), "DTLS1_BUFFER_RECORD"},
+{ERR_FUNC(SSL_F_DTLS1_CLIENT_HELLO), "DTLS1_CLIENT_HELLO"},
+{ERR_FUNC(SSL_F_DTLS1_CONNECT), "DTLS1_CONNECT"},
+{ERR_FUNC(SSL_F_DTLS1_ENC), "DTLS1_ENC"},
+{ERR_FUNC(SSL_F_DTLS1_GET_HELLO_VERIFY), "DTLS1_GET_HELLO_VERIFY"},
+{ERR_FUNC(SSL_F_DTLS1_GET_MESSAGE), "DTLS1_GET_MESSAGE"},
+{ERR_FUNC(SSL_F_DTLS1_GET_MESSAGE_FRAGMENT), "DTLS1_GET_MESSAGE_FRAGMENT"},
+{ERR_FUNC(SSL_F_DTLS1_GET_RECORD), "DTLS1_GET_RECORD"},
+{ERR_FUNC(SSL_F_DTLS1_OUTPUT_CERT_CHAIN), "DTLS1_OUTPUT_CERT_CHAIN"},
+{ERR_FUNC(SSL_F_DTLS1_PREPROCESS_FRAGMENT), "DTLS1_PREPROCESS_FRAGMENT"},
+{ERR_FUNC(SSL_F_DTLS1_PROCESS_OUT_OF_SEQ_MESSAGE), "DTLS1_PROCESS_OUT_OF_SEQ_MESSAGE"},
+{ERR_FUNC(SSL_F_DTLS1_PROCESS_RECORD), "DTLS1_PROCESS_RECORD"},
+{ERR_FUNC(SSL_F_DTLS1_READ_BYTES), "DTLS1_READ_BYTES"},
+{ERR_FUNC(SSL_F_DTLS1_READ_FAILED), "DTLS1_READ_FAILED"},
+{ERR_FUNC(SSL_F_DTLS1_SEND_CERTIFICATE_REQUEST), "DTLS1_SEND_CERTIFICATE_REQUEST"},
+{ERR_FUNC(SSL_F_DTLS1_SEND_CLIENT_CERTIFICATE), "DTLS1_SEND_CLIENT_CERTIFICATE"},
+{ERR_FUNC(SSL_F_DTLS1_SEND_CLIENT_KEY_EXCHANGE), "DTLS1_SEND_CLIENT_KEY_EXCHANGE"},
+{ERR_FUNC(SSL_F_DTLS1_SEND_CLIENT_VERIFY), "DTLS1_SEND_CLIENT_VERIFY"},
+{ERR_FUNC(SSL_F_DTLS1_SEND_HELLO_VERIFY_REQUEST), "DTLS1_SEND_HELLO_VERIFY_REQUEST"},
+{ERR_FUNC(SSL_F_DTLS1_SEND_SERVER_CERTIFICATE), "DTLS1_SEND_SERVER_CERTIFICATE"},
+{ERR_FUNC(SSL_F_DTLS1_SEND_SERVER_HELLO), "DTLS1_SEND_SERVER_HELLO"},
+{ERR_FUNC(SSL_F_DTLS1_SEND_SERVER_KEY_EXCHANGE), "DTLS1_SEND_SERVER_KEY_EXCHANGE"},
+{ERR_FUNC(SSL_F_DTLS1_WRITE_APP_DATA_BYTES), "DTLS1_WRITE_APP_DATA_BYTES"},
+{ERR_FUNC(SSL_F_GET_CLIENT_FINISHED), "GET_CLIENT_FINISHED"},
+{ERR_FUNC(SSL_F_GET_CLIENT_HELLO), "GET_CLIENT_HELLO"},
+{ERR_FUNC(SSL_F_GET_CLIENT_MASTER_KEY), "GET_CLIENT_MASTER_KEY"},
+{ERR_FUNC(SSL_F_GET_SERVER_FINISHED), "GET_SERVER_FINISHED"},
+{ERR_FUNC(SSL_F_GET_SERVER_HELLO), "GET_SERVER_HELLO"},
+{ERR_FUNC(SSL_F_GET_SERVER_VERIFY), "GET_SERVER_VERIFY"},
+{ERR_FUNC(SSL_F_I2D_SSL_SESSION), "i2d_SSL_SESSION"},
+{ERR_FUNC(SSL_F_READ_N), "READ_N"},
+{ERR_FUNC(SSL_F_REQUEST_CERTIFICATE), "REQUEST_CERTIFICATE"},
+{ERR_FUNC(SSL_F_SERVER_FINISH), "SERVER_FINISH"},
+{ERR_FUNC(SSL_F_SERVER_HELLO), "SERVER_HELLO"},
+{ERR_FUNC(SSL_F_SERVER_VERIFY), "SERVER_VERIFY"},
+{ERR_FUNC(SSL_F_SSL23_ACCEPT), "SSL23_ACCEPT"},
+{ERR_FUNC(SSL_F_SSL23_CLIENT_HELLO), "SSL23_CLIENT_HELLO"},
+{ERR_FUNC(SSL_F_SSL23_CONNECT), "SSL23_CONNECT"},
+{ERR_FUNC(SSL_F_SSL23_GET_CLIENT_HELLO), "SSL23_GET_CLIENT_HELLO"},
+{ERR_FUNC(SSL_F_SSL23_GET_SERVER_HELLO), "SSL23_GET_SERVER_HELLO"},
+{ERR_FUNC(SSL_F_SSL23_PEEK), "SSL23_PEEK"},
+{ERR_FUNC(SSL_F_SSL23_READ), "SSL23_READ"},
+{ERR_FUNC(SSL_F_SSL23_WRITE), "SSL23_WRITE"},
+{ERR_FUNC(SSL_F_SSL2_ACCEPT), "SSL2_ACCEPT"},
+{ERR_FUNC(SSL_F_SSL2_CONNECT), "SSL2_CONNECT"},
+{ERR_FUNC(SSL_F_SSL2_ENC_INIT), "SSL2_ENC_INIT"},
+{ERR_FUNC(SSL_F_SSL2_GENERATE_KEY_MATERIAL), "SSL2_GENERATE_KEY_MATERIAL"},
+{ERR_FUNC(SSL_F_SSL2_PEEK), "SSL2_PEEK"},
+{ERR_FUNC(SSL_F_SSL2_READ), "SSL2_READ"},
+{ERR_FUNC(SSL_F_SSL2_READ_INTERNAL), "SSL2_READ_INTERNAL"},
+{ERR_FUNC(SSL_F_SSL2_SET_CERTIFICATE), "SSL2_SET_CERTIFICATE"},
+{ERR_FUNC(SSL_F_SSL2_WRITE), "SSL2_WRITE"},
+{ERR_FUNC(SSL_F_SSL3_ACCEPT), "SSL3_ACCEPT"},
+{ERR_FUNC(SSL_F_SSL3_CALLBACK_CTRL), "SSL3_CALLBACK_CTRL"},
+{ERR_FUNC(SSL_F_SSL3_CHANGE_CIPHER_STATE), "SSL3_CHANGE_CIPHER_STATE"},
+{ERR_FUNC(SSL_F_SSL3_CHECK_CERT_AND_ALGORITHM), "SSL3_CHECK_CERT_AND_ALGORITHM"},
+{ERR_FUNC(SSL_F_SSL3_CLIENT_HELLO), "SSL3_CLIENT_HELLO"},
+{ERR_FUNC(SSL_F_SSL3_CONNECT), "SSL3_CONNECT"},
+{ERR_FUNC(SSL_F_SSL3_CTRL), "SSL3_CTRL"},
+{ERR_FUNC(SSL_F_SSL3_CTX_CTRL), "SSL3_CTX_CTRL"},
+{ERR_FUNC(SSL_F_SSL3_ENC), "SSL3_ENC"},
+{ERR_FUNC(SSL_F_SSL3_GENERATE_KEY_BLOCK), "SSL3_GENERATE_KEY_BLOCK"},
+{ERR_FUNC(SSL_F_SSL3_GET_CERTIFICATE_REQUEST), "SSL3_GET_CERTIFICATE_REQUEST"},
+{ERR_FUNC(SSL_F_SSL3_GET_CERT_VERIFY), "SSL3_GET_CERT_VERIFY"},
+{ERR_FUNC(SSL_F_SSL3_GET_CLIENT_CERTIFICATE), "SSL3_GET_CLIENT_CERTIFICATE"},
+{ERR_FUNC(SSL_F_SSL3_GET_CLIENT_HELLO), "SSL3_GET_CLIENT_HELLO"},
+{ERR_FUNC(SSL_F_SSL3_GET_CLIENT_KEY_EXCHANGE), "SSL3_GET_CLIENT_KEY_EXCHANGE"},
+{ERR_FUNC(SSL_F_SSL3_GET_FINISHED), "SSL3_GET_FINISHED"},
+{ERR_FUNC(SSL_F_SSL3_GET_KEY_EXCHANGE), "SSL3_GET_KEY_EXCHANGE"},
+{ERR_FUNC(SSL_F_SSL3_GET_MESSAGE), "SSL3_GET_MESSAGE"},
+{ERR_FUNC(SSL_F_SSL3_GET_NEW_SESSION_TICKET), "SSL3_GET_NEW_SESSION_TICKET"},
+{ERR_FUNC(SSL_F_SSL3_GET_RECORD), "SSL3_GET_RECORD"},
+{ERR_FUNC(SSL_F_SSL3_GET_SERVER_CERTIFICATE), "SSL3_GET_SERVER_CERTIFICATE"},
+{ERR_FUNC(SSL_F_SSL3_GET_SERVER_DONE), "SSL3_GET_SERVER_DONE"},
+{ERR_FUNC(SSL_F_SSL3_GET_SERVER_HELLO), "SSL3_GET_SERVER_HELLO"},
+{ERR_FUNC(SSL_F_SSL3_NEW_SESSION_TICKET), "SSL3_NEW_SESSION_TICKET"},
+{ERR_FUNC(SSL_F_SSL3_OUTPUT_CERT_CHAIN), "SSL3_OUTPUT_CERT_CHAIN"},
+{ERR_FUNC(SSL_F_SSL3_PEEK), "SSL3_PEEK"},
+{ERR_FUNC(SSL_F_SSL3_READ_BYTES), "SSL3_READ_BYTES"},
+{ERR_FUNC(SSL_F_SSL3_READ_N), "SSL3_READ_N"},
+{ERR_FUNC(SSL_F_SSL3_SEND_CERTIFICATE_REQUEST), "SSL3_SEND_CERTIFICATE_REQUEST"},
+{ERR_FUNC(SSL_F_SSL3_SEND_CLIENT_CERTIFICATE), "SSL3_SEND_CLIENT_CERTIFICATE"},
+{ERR_FUNC(SSL_F_SSL3_SEND_CLIENT_KEY_EXCHANGE), "SSL3_SEND_CLIENT_KEY_EXCHANGE"},
+{ERR_FUNC(SSL_F_SSL3_SEND_CLIENT_VERIFY), "SSL3_SEND_CLIENT_VERIFY"},
+{ERR_FUNC(SSL_F_SSL3_SEND_SERVER_CERTIFICATE), "SSL3_SEND_SERVER_CERTIFICATE"},
+{ERR_FUNC(SSL_F_SSL3_SEND_SERVER_HELLO), "SSL3_SEND_SERVER_HELLO"},
+{ERR_FUNC(SSL_F_SSL3_SEND_SERVER_KEY_EXCHANGE), "SSL3_SEND_SERVER_KEY_EXCHANGE"},
+{ERR_FUNC(SSL_F_SSL3_SETUP_BUFFERS), "SSL3_SETUP_BUFFERS"},
+{ERR_FUNC(SSL_F_SSL3_SETUP_KEY_BLOCK), "SSL3_SETUP_KEY_BLOCK"},
+{ERR_FUNC(SSL_F_SSL3_WRITE_BYTES), "SSL3_WRITE_BYTES"},
+{ERR_FUNC(SSL_F_SSL3_WRITE_PENDING), "SSL3_WRITE_PENDING"},
+{ERR_FUNC(SSL_F_SSL_ADD_CLIENTHELLO_TLSEXT), "SSL_ADD_CLIENTHELLO_TLSEXT"},
+{ERR_FUNC(SSL_F_SSL_ADD_DIR_CERT_SUBJECTS_TO_STACK), "SSL_add_dir_cert_subjects_to_stack"},
+{ERR_FUNC(SSL_F_SSL_ADD_FILE_CERT_SUBJECTS_TO_STACK), "SSL_add_file_cert_subjects_to_stack"},
+{ERR_FUNC(SSL_F_SSL_ADD_SERVERHELLO_TLSEXT), "SSL_ADD_SERVERHELLO_TLSEXT"},
+{ERR_FUNC(SSL_F_SSL_BAD_METHOD), "SSL_BAD_METHOD"},
+{ERR_FUNC(SSL_F_SSL_BYTES_TO_CIPHER_LIST), "SSL_BYTES_TO_CIPHER_LIST"},
+{ERR_FUNC(SSL_F_SSL_CERT_DUP), "SSL_CERT_DUP"},
+{ERR_FUNC(SSL_F_SSL_CERT_INST), "SSL_CERT_INST"},
+{ERR_FUNC(SSL_F_SSL_CERT_INSTANTIATE), "SSL_CERT_INSTANTIATE"},
+{ERR_FUNC(SSL_F_SSL_CERT_NEW), "SSL_CERT_NEW"},
+{ERR_FUNC(SSL_F_SSL_CHECK_PRIVATE_KEY), "SSL_check_private_key"},
+{ERR_FUNC(SSL_F_SSL_CHECK_SERVERHELLO_TLSEXT), "SSL_CHECK_SERVERHELLO_TLSEXT"},
+{ERR_FUNC(SSL_F_SSL_CIPHER_PROCESS_RULESTR), "SSL_CIPHER_PROCESS_RULESTR"},
+{ERR_FUNC(SSL_F_SSL_CIPHER_STRENGTH_SORT), "SSL_CIPHER_STRENGTH_SORT"},
+{ERR_FUNC(SSL_F_SSL_CLEAR), "SSL_clear"},
+{ERR_FUNC(SSL_F_SSL_COMP_ADD_COMPRESSION_METHOD), "SSL_COMP_add_compression_method"},
+{ERR_FUNC(SSL_F_SSL_CREATE_CIPHER_LIST), "SSL_CREATE_CIPHER_LIST"},
+{ERR_FUNC(SSL_F_SSL_CTRL), "SSL_ctrl"},
+{ERR_FUNC(SSL_F_SSL_CTX_CHECK_PRIVATE_KEY), "SSL_CTX_check_private_key"},
+{ERR_FUNC(SSL_F_SSL_CTX_NEW), "SSL_CTX_new"},
+{ERR_FUNC(SSL_F_SSL_CTX_SET_CIPHER_LIST), "SSL_CTX_set_cipher_list"},
+{ERR_FUNC(SSL_F_SSL_CTX_SET_PURPOSE), "SSL_CTX_set_purpose"},
+{ERR_FUNC(SSL_F_SSL_CTX_SET_SESSION_ID_CONTEXT), "SSL_CTX_set_session_id_context"},
+{ERR_FUNC(SSL_F_SSL_CTX_SET_SSL_VERSION), "SSL_CTX_set_ssl_version"},
+{ERR_FUNC(SSL_F_SSL_CTX_SET_TRUST), "SSL_CTX_set_trust"},
+{ERR_FUNC(SSL_F_SSL_CTX_USE_CERTIFICATE), "SSL_CTX_use_certificate"},
+{ERR_FUNC(SSL_F_SSL_CTX_USE_CERTIFICATE_ASN1), "SSL_CTX_use_certificate_ASN1"},
+{ERR_FUNC(SSL_F_SSL_CTX_USE_CERTIFICATE_CHAIN_FILE), "SSL_CTX_use_certificate_chain_file"},
+{ERR_FUNC(SSL_F_SSL_CTX_USE_CERTIFICATE_FILE), "SSL_CTX_use_certificate_file"},
+{ERR_FUNC(SSL_F_SSL_CTX_USE_PRIVATEKEY), "SSL_CTX_use_PrivateKey"},
+{ERR_FUNC(SSL_F_SSL_CTX_USE_PRIVATEKEY_ASN1), "SSL_CTX_use_PrivateKey_ASN1"},
+{ERR_FUNC(SSL_F_SSL_CTX_USE_PRIVATEKEY_FILE), "SSL_CTX_use_PrivateKey_file"},
+{ERR_FUNC(SSL_F_SSL_CTX_USE_RSAPRIVATEKEY), "SSL_CTX_use_RSAPrivateKey"},
+{ERR_FUNC(SSL_F_SSL_CTX_USE_RSAPRIVATEKEY_ASN1), "SSL_CTX_use_RSAPrivateKey_ASN1"},
+{ERR_FUNC(SSL_F_SSL_CTX_USE_RSAPRIVATEKEY_FILE), "SSL_CTX_use_RSAPrivateKey_file"},
+{ERR_FUNC(SSL_F_SSL_DO_HANDSHAKE), "SSL_do_handshake"},
+{ERR_FUNC(SSL_F_SSL_GET_NEW_SESSION), "SSL_GET_NEW_SESSION"},
+{ERR_FUNC(SSL_F_SSL_GET_PREV_SESSION), "SSL_GET_PREV_SESSION"},
+{ERR_FUNC(SSL_F_SSL_GET_SERVER_SEND_CERT), "SSL_GET_SERVER_SEND_CERT"},
+{ERR_FUNC(SSL_F_SSL_GET_SIGN_PKEY), "SSL_GET_SIGN_PKEY"},
+{ERR_FUNC(SSL_F_SSL_INIT_WBIO_BUFFER), "SSL_INIT_WBIO_BUFFER"},
+{ERR_FUNC(SSL_F_SSL_LOAD_CLIENT_CA_FILE), "SSL_load_client_CA_file"},
+{ERR_FUNC(SSL_F_SSL_NEW), "SSL_new"},
+{ERR_FUNC(SSL_F_SSL_PEEK), "SSL_peek"},
+{ERR_FUNC(SSL_F_SSL_PREPARE_CLIENTHELLO_TLSEXT), "SSL_PREPARE_CLIENTHELLO_TLSEXT"},
+{ERR_FUNC(SSL_F_SSL_PREPARE_SERVERHELLO_TLSEXT), "SSL_PREPARE_SERVERHELLO_TLSEXT"},
+{ERR_FUNC(SSL_F_SSL_READ), "SSL_read"},
+{ERR_FUNC(SSL_F_SSL_RSA_PRIVATE_DECRYPT), "SSL_RSA_PRIVATE_DECRYPT"},
+{ERR_FUNC(SSL_F_SSL_RSA_PUBLIC_ENCRYPT), "SSL_RSA_PUBLIC_ENCRYPT"},
+{ERR_FUNC(SSL_F_SSL_SESSION_NEW), "SSL_SESSION_new"},
+{ERR_FUNC(SSL_F_SSL_SESSION_PRINT_FP), "SSL_SESSION_print_fp"},
+{ERR_FUNC(SSL_F_SSL_SESS_CERT_NEW), "SSL_SESS_CERT_NEW"},
+{ERR_FUNC(SSL_F_SSL_SET_CERT), "SSL_SET_CERT"},
+{ERR_FUNC(SSL_F_SSL_SET_CIPHER_LIST), "SSL_set_cipher_list"},
+{ERR_FUNC(SSL_F_SSL_SET_FD), "SSL_set_fd"},
+{ERR_FUNC(SSL_F_SSL_SET_PKEY), "SSL_SET_PKEY"},
+{ERR_FUNC(SSL_F_SSL_SET_PURPOSE), "SSL_set_purpose"},
+{ERR_FUNC(SSL_F_SSL_SET_RFD), "SSL_set_rfd"},
+{ERR_FUNC(SSL_F_SSL_SET_SESSION), "SSL_set_session"},
+{ERR_FUNC(SSL_F_SSL_SET_SESSION_ID_CONTEXT), "SSL_set_session_id_context"},
+{ERR_FUNC(SSL_F_SSL_SET_TRUST), "SSL_set_trust"},
+{ERR_FUNC(SSL_F_SSL_SET_WFD), "SSL_set_wfd"},
+{ERR_FUNC(SSL_F_SSL_SHUTDOWN), "SSL_shutdown"},
+{ERR_FUNC(SSL_F_SSL_UNDEFINED_CONST_FUNCTION), "SSL_UNDEFINED_CONST_FUNCTION"},
+{ERR_FUNC(SSL_F_SSL_UNDEFINED_FUNCTION), "SSL_UNDEFINED_FUNCTION"},
+{ERR_FUNC(SSL_F_SSL_UNDEFINED_VOID_FUNCTION), "SSL_UNDEFINED_VOID_FUNCTION"},
+{ERR_FUNC(SSL_F_SSL_USE_CERTIFICATE), "SSL_use_certificate"},
+{ERR_FUNC(SSL_F_SSL_USE_CERTIFICATE_ASN1), "SSL_use_certificate_ASN1"},
+{ERR_FUNC(SSL_F_SSL_USE_CERTIFICATE_FILE), "SSL_use_certificate_file"},
+{ERR_FUNC(SSL_F_SSL_USE_PRIVATEKEY), "SSL_use_PrivateKey"},
+{ERR_FUNC(SSL_F_SSL_USE_PRIVATEKEY_ASN1), "SSL_use_PrivateKey_ASN1"},
+{ERR_FUNC(SSL_F_SSL_USE_PRIVATEKEY_FILE), "SSL_use_PrivateKey_file"},
+{ERR_FUNC(SSL_F_SSL_USE_RSAPRIVATEKEY), "SSL_use_RSAPrivateKey"},
+{ERR_FUNC(SSL_F_SSL_USE_RSAPRIVATEKEY_ASN1), "SSL_use_RSAPrivateKey_ASN1"},
+{ERR_FUNC(SSL_F_SSL_USE_RSAPRIVATEKEY_FILE), "SSL_use_RSAPrivateKey_file"},
+{ERR_FUNC(SSL_F_SSL_VERIFY_CERT_CHAIN), "SSL_VERIFY_CERT_CHAIN"},
+{ERR_FUNC(SSL_F_SSL_WRITE), "SSL_write"},
+{ERR_FUNC(SSL_F_TLS1_CHANGE_CIPHER_STATE), "TLS1_CHANGE_CIPHER_STATE"},
+{ERR_FUNC(SSL_F_TLS1_ENC), "TLS1_ENC"},
+{ERR_FUNC(SSL_F_TLS1_SETUP_KEY_BLOCK), "TLS1_SETUP_KEY_BLOCK"},
+{ERR_FUNC(SSL_F_WRITE_PENDING), "WRITE_PENDING"},
+{0,NULL}
+ };
+
+static ERR_STRING_DATA SSL_str_reasons[]=
+ {
+{ERR_REASON(SSL_R_APP_DATA_IN_HANDSHAKE) ,"app data in handshake"},
+{ERR_REASON(SSL_R_ATTEMPT_TO_REUSE_SESSION_IN_DIFFERENT_CONTEXT),"attempt to reuse session in different context"},
+{ERR_REASON(SSL_R_BAD_ALERT_RECORD) ,"bad alert record"},
+{ERR_REASON(SSL_R_BAD_AUTHENTICATION_TYPE),"bad authentication type"},
+{ERR_REASON(SSL_R_BAD_CHANGE_CIPHER_SPEC),"bad change cipher spec"},
+{ERR_REASON(SSL_R_BAD_CHECKSUM) ,"bad checksum"},
+{ERR_REASON(SSL_R_BAD_DATA_RETURNED_BY_CALLBACK),"bad data returned by callback"},
+{ERR_REASON(SSL_R_BAD_DECOMPRESSION) ,"bad decompression"},
+{ERR_REASON(SSL_R_BAD_DH_G_LENGTH) ,"bad dh g length"},
+{ERR_REASON(SSL_R_BAD_DH_PUB_KEY_LENGTH) ,"bad dh pub key length"},
+{ERR_REASON(SSL_R_BAD_DH_P_LENGTH) ,"bad dh p length"},
+{ERR_REASON(SSL_R_BAD_DIGEST_LENGTH) ,"bad digest length"},
+{ERR_REASON(SSL_R_BAD_DSA_SIGNATURE) ,"bad dsa signature"},
+{ERR_REASON(SSL_R_BAD_ECC_CERT) ,"bad ecc cert"},
+{ERR_REASON(SSL_R_BAD_ECDSA_SIGNATURE) ,"bad ecdsa signature"},
+{ERR_REASON(SSL_R_BAD_ECPOINT) ,"bad ecpoint"},
+{ERR_REASON(SSL_R_BAD_HELLO_REQUEST) ,"bad hello request"},
+{ERR_REASON(SSL_R_BAD_LENGTH) ,"bad length"},
+{ERR_REASON(SSL_R_BAD_MAC_DECODE) ,"bad mac decode"},
+{ERR_REASON(SSL_R_BAD_MESSAGE_TYPE) ,"bad message type"},
+{ERR_REASON(SSL_R_BAD_PACKET_LENGTH) ,"bad packet length"},
+{ERR_REASON(SSL_R_BAD_PROTOCOL_VERSION_NUMBER),"bad protocol version number"},
+{ERR_REASON(SSL_R_BAD_RESPONSE_ARGUMENT) ,"bad response argument"},
+{ERR_REASON(SSL_R_BAD_RSA_DECRYPT) ,"bad rsa decrypt"},
+{ERR_REASON(SSL_R_BAD_RSA_ENCRYPT) ,"bad rsa encrypt"},
+{ERR_REASON(SSL_R_BAD_RSA_E_LENGTH) ,"bad rsa e length"},
+{ERR_REASON(SSL_R_BAD_RSA_MODULUS_LENGTH),"bad rsa modulus length"},
+{ERR_REASON(SSL_R_BAD_RSA_SIGNATURE) ,"bad rsa signature"},
+{ERR_REASON(SSL_R_BAD_SIGNATURE) ,"bad signature"},
+{ERR_REASON(SSL_R_BAD_SSL_FILETYPE) ,"bad ssl filetype"},
+{ERR_REASON(SSL_R_BAD_SSL_SESSION_ID_LENGTH),"bad ssl session id length"},
+{ERR_REASON(SSL_R_BAD_STATE) ,"bad state"},
+{ERR_REASON(SSL_R_BAD_WRITE_RETRY) ,"bad write retry"},
+{ERR_REASON(SSL_R_BIO_NOT_SET) ,"bio not set"},
+{ERR_REASON(SSL_R_BLOCK_CIPHER_PAD_IS_WRONG),"block cipher pad is wrong"},
+{ERR_REASON(SSL_R_BN_LIB) ,"bn lib"},
+{ERR_REASON(SSL_R_CA_DN_LENGTH_MISMATCH) ,"ca dn length mismatch"},
+{ERR_REASON(SSL_R_CA_DN_TOO_LONG) ,"ca dn too long"},
+{ERR_REASON(SSL_R_CCS_RECEIVED_EARLY) ,"ccs received early"},
+{ERR_REASON(SSL_R_CERTIFICATE_VERIFY_FAILED),"certificate verify failed"},
+{ERR_REASON(SSL_R_CERT_LENGTH_MISMATCH) ,"cert length mismatch"},
+{ERR_REASON(SSL_R_CHALLENGE_IS_DIFFERENT),"challenge is different"},
+{ERR_REASON(SSL_R_CIPHER_CODE_WRONG_LENGTH),"cipher code wrong length"},
+{ERR_REASON(SSL_R_CIPHER_OR_HASH_UNAVAILABLE),"cipher or hash unavailable"},
+{ERR_REASON(SSL_R_CIPHER_TABLE_SRC_ERROR),"cipher table src error"},
+{ERR_REASON(SSL_R_CLIENTHELLO_TLSEXT) ,"clienthello tlsext"},
+{ERR_REASON(SSL_R_COMPRESSED_LENGTH_TOO_LONG),"compressed length too long"},
+{ERR_REASON(SSL_R_COMPRESSION_FAILURE) ,"compression failure"},
+{ERR_REASON(SSL_R_COMPRESSION_ID_NOT_WITHIN_PRIVATE_RANGE),"compression id not within private range"},
+{ERR_REASON(SSL_R_COMPRESSION_LIBRARY_ERROR),"compression library error"},
+{ERR_REASON(SSL_R_CONNECTION_ID_IS_DIFFERENT),"connection id is different"},
+{ERR_REASON(SSL_R_CONNECTION_TYPE_NOT_SET),"connection type not set"},
+{ERR_REASON(SSL_R_COOKIE_MISMATCH) ,"cookie mismatch"},
+{ERR_REASON(SSL_R_DATA_BETWEEN_CCS_AND_FINISHED),"data between ccs and finished"},
+{ERR_REASON(SSL_R_DATA_LENGTH_TOO_LONG) ,"data length too long"},
+{ERR_REASON(SSL_R_DECRYPTION_FAILED) ,"decryption failed"},
+{ERR_REASON(SSL_R_DECRYPTION_FAILED_OR_BAD_RECORD_MAC),"decryption failed or bad record mac"},
+{ERR_REASON(SSL_R_DH_PUBLIC_VALUE_LENGTH_IS_WRONG),"dh public value length is wrong"},
+{ERR_REASON(SSL_R_DIGEST_CHECK_FAILED) ,"digest check failed"},
+{ERR_REASON(SSL_R_DUPLICATE_COMPRESSION_ID),"duplicate compression id"},
+{ERR_REASON(SSL_R_ECGROUP_TOO_LARGE_FOR_CIPHER),"ecgroup too large for cipher"},
+{ERR_REASON(SSL_R_ENCRYPTED_LENGTH_TOO_LONG),"encrypted length too long"},
+{ERR_REASON(SSL_R_ERROR_GENERATING_TMP_RSA_KEY),"error generating tmp rsa key"},
+{ERR_REASON(SSL_R_ERROR_IN_RECEIVED_CIPHER_LIST),"error in received cipher list"},
+{ERR_REASON(SSL_R_EXCESSIVE_MESSAGE_SIZE),"excessive message size"},
+{ERR_REASON(SSL_R_EXTRA_DATA_IN_MESSAGE) ,"extra data in message"},
+{ERR_REASON(SSL_R_GOT_A_FIN_BEFORE_A_CCS),"got a fin before a ccs"},
+{ERR_REASON(SSL_R_HTTPS_PROXY_REQUEST) ,"https proxy request"},
+{ERR_REASON(SSL_R_HTTP_REQUEST) ,"http request"},
+{ERR_REASON(SSL_R_ILLEGAL_PADDING) ,"illegal padding"},
+{ERR_REASON(SSL_R_INVALID_CHALLENGE_LENGTH),"invalid challenge length"},
+{ERR_REASON(SSL_R_INVALID_COMMAND) ,"invalid command"},
+{ERR_REASON(SSL_R_INVALID_PURPOSE) ,"invalid purpose"},
+{ERR_REASON(SSL_R_INVALID_TICKET_KEYS_LENGTH),"invalid ticket keys length"},
+{ERR_REASON(SSL_R_INVALID_TRUST) ,"invalid trust"},
+{ERR_REASON(SSL_R_KEY_ARG_TOO_LONG) ,"key arg too long"},
+{ERR_REASON(SSL_R_KRB5) ,"krb5"},
+{ERR_REASON(SSL_R_KRB5_C_CC_PRINC) ,"krb5 client cc principal (no tkt?)"},
+{ERR_REASON(SSL_R_KRB5_C_GET_CRED) ,"krb5 client get cred"},
+{ERR_REASON(SSL_R_KRB5_C_INIT) ,"krb5 client init"},
+{ERR_REASON(SSL_R_KRB5_C_MK_REQ) ,"krb5 client mk_req (expired tkt?)"},
+{ERR_REASON(SSL_R_KRB5_S_BAD_TICKET) ,"krb5 server bad ticket"},
+{ERR_REASON(SSL_R_KRB5_S_INIT) ,"krb5 server init"},
+{ERR_REASON(SSL_R_KRB5_S_RD_REQ) ,"krb5 server rd_req (keytab perms?)"},
+{ERR_REASON(SSL_R_KRB5_S_TKT_EXPIRED) ,"krb5 server tkt expired"},
+{ERR_REASON(SSL_R_KRB5_S_TKT_NYV) ,"krb5 server tkt not yet valid"},
+{ERR_REASON(SSL_R_KRB5_S_TKT_SKEW) ,"krb5 server tkt skew"},
+{ERR_REASON(SSL_R_LENGTH_MISMATCH) ,"length mismatch"},
+{ERR_REASON(SSL_R_LENGTH_TOO_SHORT) ,"length too short"},
+{ERR_REASON(SSL_R_LIBRARY_BUG) ,"library bug"},
+{ERR_REASON(SSL_R_LIBRARY_HAS_NO_CIPHERS),"library has no ciphers"},
+{ERR_REASON(SSL_R_MESSAGE_TOO_LONG) ,"message too long"},
+{ERR_REASON(SSL_R_MISSING_DH_DSA_CERT) ,"missing dh dsa cert"},
+{ERR_REASON(SSL_R_MISSING_DH_KEY) ,"missing dh key"},
+{ERR_REASON(SSL_R_MISSING_DH_RSA_CERT) ,"missing dh rsa cert"},
+{ERR_REASON(SSL_R_MISSING_DSA_SIGNING_CERT),"missing dsa signing cert"},
+{ERR_REASON(SSL_R_MISSING_EXPORT_TMP_DH_KEY),"missing export tmp dh key"},
+{ERR_REASON(SSL_R_MISSING_EXPORT_TMP_RSA_KEY),"missing export tmp rsa key"},
+{ERR_REASON(SSL_R_MISSING_RSA_CERTIFICATE),"missing rsa certificate"},
+{ERR_REASON(SSL_R_MISSING_RSA_ENCRYPTING_CERT),"missing rsa encrypting cert"},
+{ERR_REASON(SSL_R_MISSING_RSA_SIGNING_CERT),"missing rsa signing cert"},
+{ERR_REASON(SSL_R_MISSING_TMP_DH_KEY) ,"missing tmp dh key"},
+{ERR_REASON(SSL_R_MISSING_TMP_ECDH_KEY) ,"missing tmp ecdh key"},
+{ERR_REASON(SSL_R_MISSING_TMP_RSA_KEY) ,"missing tmp rsa key"},
+{ERR_REASON(SSL_R_MISSING_TMP_RSA_PKEY) ,"missing tmp rsa pkey"},
+{ERR_REASON(SSL_R_MISSING_VERIFY_MESSAGE),"missing verify message"},
+{ERR_REASON(SSL_R_NON_SSLV2_INITIAL_PACKET),"non sslv2 initial packet"},
+{ERR_REASON(SSL_R_NO_CERTIFICATES_RETURNED),"no certificates returned"},
+{ERR_REASON(SSL_R_NO_CERTIFICATE_ASSIGNED),"no certificate assigned"},
+{ERR_REASON(SSL_R_NO_CERTIFICATE_RETURNED),"no certificate returned"},
+{ERR_REASON(SSL_R_NO_CERTIFICATE_SET) ,"no certificate set"},
+{ERR_REASON(SSL_R_NO_CERTIFICATE_SPECIFIED),"no certificate specified"},
+{ERR_REASON(SSL_R_NO_CIPHERS_AVAILABLE) ,"no ciphers available"},
+{ERR_REASON(SSL_R_NO_CIPHERS_PASSED) ,"no ciphers passed"},
+{ERR_REASON(SSL_R_NO_CIPHERS_SPECIFIED) ,"no ciphers specified"},
+{ERR_REASON(SSL_R_NO_CIPHER_LIST) ,"no cipher list"},
+{ERR_REASON(SSL_R_NO_CIPHER_MATCH) ,"no cipher match"},
+{ERR_REASON(SSL_R_NO_CLIENT_CERT_RECEIVED),"no client cert received"},
+{ERR_REASON(SSL_R_NO_COMPRESSION_SPECIFIED),"no compression specified"},
+{ERR_REASON(SSL_R_NO_METHOD_SPECIFIED) ,"no method specified"},
+{ERR_REASON(SSL_R_NO_PRIVATEKEY) ,"no privatekey"},
+{ERR_REASON(SSL_R_NO_PRIVATE_KEY_ASSIGNED),"no private key assigned"},
+{ERR_REASON(SSL_R_NO_PROTOCOLS_AVAILABLE),"no protocols available"},
+{ERR_REASON(SSL_R_NO_PUBLICKEY) ,"no publickey"},
+{ERR_REASON(SSL_R_NO_SHARED_CIPHER) ,"no shared cipher"},
+{ERR_REASON(SSL_R_NO_VERIFY_CALLBACK) ,"no verify callback"},
+{ERR_REASON(SSL_R_NULL_SSL_CTX) ,"null ssl ctx"},
+{ERR_REASON(SSL_R_NULL_SSL_METHOD_PASSED),"null ssl method passed"},
+{ERR_REASON(SSL_R_OLD_SESSION_CIPHER_NOT_RETURNED),"old session cipher not returned"},
+{ERR_REASON(SSL_R_ONLY_TLS_ALLOWED_IN_FIPS_MODE),"only tls allowed in fips mode"},
+{ERR_REASON(SSL_R_PACKET_LENGTH_TOO_LONG),"packet length too long"},
+{ERR_REASON(SSL_R_PARSE_TLSEXT) ,"parse tlsext"},
+{ERR_REASON(SSL_R_PATH_TOO_LONG) ,"path too long"},
+{ERR_REASON(SSL_R_PEER_DID_NOT_RETURN_A_CERTIFICATE),"peer did not return a certificate"},
+{ERR_REASON(SSL_R_PEER_ERROR) ,"peer error"},
+{ERR_REASON(SSL_R_PEER_ERROR_CERTIFICATE),"peer error certificate"},
+{ERR_REASON(SSL_R_PEER_ERROR_NO_CERTIFICATE),"peer error no certificate"},
+{ERR_REASON(SSL_R_PEER_ERROR_NO_CIPHER) ,"peer error no cipher"},
+{ERR_REASON(SSL_R_PEER_ERROR_UNSUPPORTED_CERTIFICATE_TYPE),"peer error unsupported certificate type"},
+{ERR_REASON(SSL_R_PRE_MAC_LENGTH_TOO_LONG),"pre mac length too long"},
+{ERR_REASON(SSL_R_PROBLEMS_MAPPING_CIPHER_FUNCTIONS),"problems mapping cipher functions"},
+{ERR_REASON(SSL_R_PROTOCOL_IS_SHUTDOWN) ,"protocol is shutdown"},
+{ERR_REASON(SSL_R_PUBLIC_KEY_ENCRYPT_ERROR),"public key encrypt error"},
+{ERR_REASON(SSL_R_PUBLIC_KEY_IS_NOT_RSA) ,"public key is not rsa"},
+{ERR_REASON(SSL_R_PUBLIC_KEY_NOT_RSA) ,"public key not rsa"},
+{ERR_REASON(SSL_R_READ_BIO_NOT_SET) ,"read bio not set"},
+{ERR_REASON(SSL_R_READ_TIMEOUT_EXPIRED) ,"read timeout expired"},
+{ERR_REASON(SSL_R_READ_WRONG_PACKET_TYPE),"read wrong packet type"},
+{ERR_REASON(SSL_R_RECORD_LENGTH_MISMATCH),"record length mismatch"},
+{ERR_REASON(SSL_R_RECORD_TOO_LARGE) ,"record too large"},
+{ERR_REASON(SSL_R_RECORD_TOO_SMALL) ,"record too small"},
+{ERR_REASON(SSL_R_REQUIRED_CIPHER_MISSING),"required cipher missing"},
+{ERR_REASON(SSL_R_REUSE_CERT_LENGTH_NOT_ZERO),"reuse cert length not zero"},
+{ERR_REASON(SSL_R_REUSE_CERT_TYPE_NOT_ZERO),"reuse cert type not zero"},
+{ERR_REASON(SSL_R_REUSE_CIPHER_LIST_NOT_ZERO),"reuse cipher list not zero"},
+{ERR_REASON(SSL_R_SERVERHELLO_TLSEXT) ,"serverhello tlsext"},
+{ERR_REASON(SSL_R_SESSION_ID_CONTEXT_UNINITIALIZED),"session id context uninitialized"},
+{ERR_REASON(SSL_R_SHORT_READ) ,"short read"},
+{ERR_REASON(SSL_R_SIGNATURE_FOR_NON_SIGNING_CERTIFICATE),"signature for non signing certificate"},
+{ERR_REASON(SSL_R_SSL23_DOING_SESSION_ID_REUSE),"ssl23 doing session id reuse"},
+{ERR_REASON(SSL_R_SSL2_CONNECTION_ID_TOO_LONG),"ssl2 connection id too long"},
+{ERR_REASON(SSL_R_SSL3_EXT_INVALID_SERVERNAME),"ssl3 ext invalid servername"},
+{ERR_REASON(SSL_R_SSL3_EXT_INVALID_SERVERNAME_TYPE),"ssl3 ext invalid servername type"},
+{ERR_REASON(SSL_R_SSL3_SESSION_ID_TOO_LONG),"ssl3 session id too long"},
+{ERR_REASON(SSL_R_SSL3_SESSION_ID_TOO_SHORT),"ssl3 session id too short"},
+{ERR_REASON(SSL_R_SSLV3_ALERT_BAD_CERTIFICATE),"sslv3 alert bad certificate"},
+{ERR_REASON(SSL_R_SSLV3_ALERT_BAD_RECORD_MAC),"sslv3 alert bad record mac"},
+{ERR_REASON(SSL_R_SSLV3_ALERT_CERTIFICATE_EXPIRED),"sslv3 alert certificate expired"},
+{ERR_REASON(SSL_R_SSLV3_ALERT_CERTIFICATE_REVOKED),"sslv3 alert certificate revoked"},
+{ERR_REASON(SSL_R_SSLV3_ALERT_CERTIFICATE_UNKNOWN),"sslv3 alert certificate unknown"},
+{ERR_REASON(SSL_R_SSLV3_ALERT_DECOMPRESSION_FAILURE),"sslv3 alert decompression failure"},
+{ERR_REASON(SSL_R_SSLV3_ALERT_HANDSHAKE_FAILURE),"sslv3 alert handshake failure"},
+{ERR_REASON(SSL_R_SSLV3_ALERT_ILLEGAL_PARAMETER),"sslv3 alert illegal parameter"},
+{ERR_REASON(SSL_R_SSLV3_ALERT_NO_CERTIFICATE),"sslv3 alert no certificate"},
+{ERR_REASON(SSL_R_SSLV3_ALERT_UNEXPECTED_MESSAGE),"sslv3 alert unexpected message"},
+{ERR_REASON(SSL_R_SSLV3_ALERT_UNSUPPORTED_CERTIFICATE),"sslv3 alert unsupported certificate"},
+{ERR_REASON(SSL_R_SSL_CTX_HAS_NO_DEFAULT_SSL_VERSION),"ssl ctx has no default ssl version"},
+{ERR_REASON(SSL_R_SSL_HANDSHAKE_FAILURE) ,"ssl handshake failure"},
+{ERR_REASON(SSL_R_SSL_LIBRARY_HAS_NO_CIPHERS),"ssl library has no ciphers"},
+{ERR_REASON(SSL_R_SSL_SESSION_ID_CALLBACK_FAILED),"ssl session id callback failed"},
+{ERR_REASON(SSL_R_SSL_SESSION_ID_CONFLICT),"ssl session id conflict"},
+{ERR_REASON(SSL_R_SSL_SESSION_ID_CONTEXT_TOO_LONG),"ssl session id context too long"},
+{ERR_REASON(SSL_R_SSL_SESSION_ID_HAS_BAD_LENGTH),"ssl session id has bad length"},
+{ERR_REASON(SSL_R_SSL_SESSION_ID_IS_DIFFERENT),"ssl session id is different"},
+{ERR_REASON(SSL_R_TLSV1_ALERT_ACCESS_DENIED),"tlsv1 alert access denied"},
+{ERR_REASON(SSL_R_TLSV1_ALERT_DECODE_ERROR),"tlsv1 alert decode error"},
+{ERR_REASON(SSL_R_TLSV1_ALERT_DECRYPTION_FAILED),"tlsv1 alert decryption failed"},
+{ERR_REASON(SSL_R_TLSV1_ALERT_DECRYPT_ERROR),"tlsv1 alert decrypt error"},
+{ERR_REASON(SSL_R_TLSV1_ALERT_EXPORT_RESTRICTION),"tlsv1 alert export restriction"},
+{ERR_REASON(SSL_R_TLSV1_ALERT_INSUFFICIENT_SECURITY),"tlsv1 alert insufficient security"},
+{ERR_REASON(SSL_R_TLSV1_ALERT_INTERNAL_ERROR),"tlsv1 alert internal error"},
+{ERR_REASON(SSL_R_TLSV1_ALERT_NO_RENEGOTIATION),"tlsv1 alert no renegotiation"},
+{ERR_REASON(SSL_R_TLSV1_ALERT_PROTOCOL_VERSION),"tlsv1 alert protocol version"},
+{ERR_REASON(SSL_R_TLSV1_ALERT_RECORD_OVERFLOW),"tlsv1 alert record overflow"},
+{ERR_REASON(SSL_R_TLSV1_ALERT_UNKNOWN_CA),"tlsv1 alert unknown ca"},
+{ERR_REASON(SSL_R_TLSV1_ALERT_USER_CANCELLED),"tlsv1 alert user cancelled"},
+{ERR_REASON(SSL_R_TLS_CLIENT_CERT_REQ_WITH_ANON_CIPHER),"tls client cert req with anon cipher"},
+{ERR_REASON(SSL_R_TLS_INVALID_ECPOINTFORMAT_LIST),"tls invalid ecpointformat list"},
+{ERR_REASON(SSL_R_TLS_PEER_DID_NOT_RESPOND_WITH_CERTIFICATE_LIST),"tls peer did not respond with certificate list"},
+{ERR_REASON(SSL_R_TLS_RSA_ENCRYPTED_VALUE_LENGTH_IS_WRONG),"tls rsa encrypted value length is wrong"},
+{ERR_REASON(SSL_R_TRIED_TO_USE_UNSUPPORTED_CIPHER),"tried to use unsupported cipher"},
+{ERR_REASON(SSL_R_UNABLE_TO_DECODE_DH_CERTS),"unable to decode dh certs"},
+{ERR_REASON(SSL_R_UNABLE_TO_DECODE_ECDH_CERTS),"unable to decode ecdh certs"},
+{ERR_REASON(SSL_R_UNABLE_TO_EXTRACT_PUBLIC_KEY),"unable to extract public key"},
+{ERR_REASON(SSL_R_UNABLE_TO_FIND_DH_PARAMETERS),"unable to find dh parameters"},
+{ERR_REASON(SSL_R_UNABLE_TO_FIND_ECDH_PARAMETERS),"unable to find ecdh parameters"},
+{ERR_REASON(SSL_R_UNABLE_TO_FIND_PUBLIC_KEY_PARAMETERS),"unable to find public key parameters"},
+{ERR_REASON(SSL_R_UNABLE_TO_FIND_SSL_METHOD),"unable to find ssl method"},
+{ERR_REASON(SSL_R_UNABLE_TO_LOAD_SSL2_MD5_ROUTINES),"unable to load ssl2 md5 routines"},
+{ERR_REASON(SSL_R_UNABLE_TO_LOAD_SSL3_MD5_ROUTINES),"unable to load ssl3 md5 routines"},
+{ERR_REASON(SSL_R_UNABLE_TO_LOAD_SSL3_SHA1_ROUTINES),"unable to load ssl3 sha1 routines"},
+{ERR_REASON(SSL_R_UNEXPECTED_MESSAGE) ,"unexpected message"},
+{ERR_REASON(SSL_R_UNEXPECTED_RECORD) ,"unexpected record"},
+{ERR_REASON(SSL_R_UNINITIALIZED) ,"uninitialized"},
+{ERR_REASON(SSL_R_UNKNOWN_ALERT_TYPE) ,"unknown alert type"},
+{ERR_REASON(SSL_R_UNKNOWN_CERTIFICATE_TYPE),"unknown certificate type"},
+{ERR_REASON(SSL_R_UNKNOWN_CIPHER_RETURNED),"unknown cipher returned"},
+{ERR_REASON(SSL_R_UNKNOWN_CIPHER_TYPE) ,"unknown cipher type"},
+{ERR_REASON(SSL_R_UNKNOWN_KEY_EXCHANGE_TYPE),"unknown key exchange type"},
+{ERR_REASON(SSL_R_UNKNOWN_PKEY_TYPE) ,"unknown pkey type"},
+{ERR_REASON(SSL_R_UNKNOWN_PROTOCOL) ,"unknown protocol"},
+{ERR_REASON(SSL_R_UNKNOWN_REMOTE_ERROR_TYPE),"unknown remote error type"},
+{ERR_REASON(SSL_R_UNKNOWN_SSL_VERSION) ,"unknown ssl version"},
+{ERR_REASON(SSL_R_UNKNOWN_STATE) ,"unknown state"},
+{ERR_REASON(SSL_R_UNSUPPORTED_CIPHER) ,"unsupported cipher"},
+{ERR_REASON(SSL_R_UNSUPPORTED_COMPRESSION_ALGORITHM),"unsupported compression algorithm"},
+{ERR_REASON(SSL_R_UNSUPPORTED_ELLIPTIC_CURVE),"unsupported elliptic curve"},
+{ERR_REASON(SSL_R_UNSUPPORTED_PROTOCOL) ,"unsupported protocol"},
+{ERR_REASON(SSL_R_UNSUPPORTED_SSL_VERSION),"unsupported ssl version"},
+{ERR_REASON(SSL_R_WRITE_BIO_NOT_SET) ,"write bio not set"},
+{ERR_REASON(SSL_R_WRONG_CIPHER_RETURNED) ,"wrong cipher returned"},
+{ERR_REASON(SSL_R_WRONG_MESSAGE_TYPE) ,"wrong message type"},
+{ERR_REASON(SSL_R_WRONG_NUMBER_OF_KEY_BITS),"wrong number of key bits"},
+{ERR_REASON(SSL_R_WRONG_SIGNATURE_LENGTH),"wrong signature length"},
+{ERR_REASON(SSL_R_WRONG_SIGNATURE_SIZE) ,"wrong signature size"},
+{ERR_REASON(SSL_R_WRONG_SSL_VERSION) ,"wrong ssl version"},
+{ERR_REASON(SSL_R_WRONG_VERSION_NUMBER) ,"wrong version number"},
+{ERR_REASON(SSL_R_X509_LIB) ,"x509 lib"},
+{ERR_REASON(SSL_R_X509_VERIFICATION_SETUP_PROBLEMS),"x509 verification setup problems"},
+{0,NULL}
+ };
+
+#endif
+
+void ERR_load_SSL_strings(void)
+ {
+#ifndef OPENSSL_NO_ERR
+
+ if (ERR_func_error_string(SSL_str_functs[0].error) == NULL)
+ {
+ ERR_load_strings(0,SSL_str_functs);
+ ERR_load_strings(0,SSL_str_reasons);
+ }
+#endif
+ }
More information about the Pkg-openssl-changes
mailing list