[Pkg-opt-media-team] Bug#524071: i have same issue
vishnu vardhan
vishnuvardhan.linux at gmail.com
Wed Mar 3 06:18:56 UTC 2010
here you can view the output of dmesg :
Script started on Wednesday 03 March 2010 11:49:04 AM IST
root:/home/user# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-21lenny3) (
dannf at debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian
4.1.2-25)) #1 SMP Wed Feb 10 08:59:21 UTC 2010
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001f6e0000 (usable)
[ 0.000000] BIOS-e820: 000000001f6e0000 - 000000001f6f7000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001f6f7000 - 000000001f6f9000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001f700000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 502MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 128736) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 128736
[ 0.000000] HighMem 128736 -> 128736
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 128736
[ 0.000000] On node 0 totalpages: 128736
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 974 pages used for memmap
[ 0.000000] Normal zone: 123666 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F6DA0, 0024 (r2 IBM )
[ 0.000000] ACPI: XSDT 1F6EB16B, 004C (r1 IBM TP-1V 1290
LTP 0)
[ 0.000000] ACPI: FACP 1F6EB200, 00F4 (r3 IBM TP-1V 1290
IBM 1)
[ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has
zero address or length: 000000000000102C/0 [20080321]
[ 0.000000] ACPI: DSDT 1F6EB3E7, BA37 (r1 IBM TP-1V 1290 MSFT
100000E)
[ 0.000000] ACPI: FACS 1F6F8000, 0040
[ 0.000000] ACPI: SSDT 1F6EB3B4, 0033 (r1 IBM TP-1V 1290 MSFT
100000E)
[ 0.000000] ACPI: ECDT 1F6F6E1E, 0052 (r1 IBM TP-1V 1290
IBM 1)
[ 0.000000] ACPI: TCPA 1F6F6E70, 0032 (r1 IBM TP-1V 1290
PTL 1)
[ 0.000000] ACPI: BOOT 1F6F6FD8, 0028 (r1 IBM TP-1V 1290
LTP 1)
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] Allocating PCI resources starting at 30000000 (gap:
20000000:df800000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 -
0000000000100000
[ 0.000000] SMP: Allowing 0 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37992 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 127730
[ 0.000000] Kernel command line: root=/dev/hda1 ro quiet
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffb000 (013fd000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Detected 1298.931 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.004000] Memory: 499524k/514944k available (1771k kernel code, 14776k
reserved, 750k data, 244k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xe0000000 - 0xff7fe000 ( 503 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xdf6e0000 ( 502 MB)
[ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
[ 0.004000] .data : 0xc02bacb5 - 0xc0376620 ( 750 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02bacb5 (1771 kB)
[ 0.004000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.084135] Calibrating delay using timer specific routine.. 2600.16
BogoMIPS (lpj=5200339)
[ 0.084179] Security Framework initialized
[ 0.084187] SELinux: Disabled at boot.
[ 0.084191] Capability LSM initialized
[ 0.084209] Mount-cache hash table entries: 512
[ 0.084381] Initializing cgroup subsys ns
[ 0.084386] Initializing cgroup subsys cpuacct
[ 0.084389] Initializing cgroup subsys devices
[ 0.084412] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.084415] CPU: L2 cache: 1024K
[ 0.084420] Intel machine check architecture supported.
[ 0.084426] Intel machine check reporting enabled on CPU#0.
[ 0.084440] Checking 'hlt' instruction... OK.
[ 0.100506] SMP alternatives: switching to UP code
[ 0.107192] Freeing SMP alternatives: 16k freed
[ 0.107195] ACPI: Core revision 20080321
[ 0.128008] ACPI: setting ELCR to 0200 (from 0800)
[ 0.132008] weird, boot CPU (#0) not listedby the BIOS.
[ 0.132008] SMP motherboard not detected.
[ 0.132008] Local APIC not detected. Using dummy APIC emulation.
[ 0.132008] SMP disabled
[ 0.132008] Brought up 1 CPUs
[ 0.132008] Total of 1 processors activated (2600.16 BogoMIPS).
[ 0.132008] CPU0 attaching sched-domain:
[ 0.132008] domain 0: span 0
[ 0.132008] groups: 0
[ 0.132008] net_namespace: 660 bytes
[ 0.132008] Booting paravirtualized kernel on bare hardware
[ 0.132008] NET: Registered protocol family 16
[ 0.132008] ACPI: bus type pci registered
[ 0.132008] PCI: PCI BIOS revision 2.10 entry at 0xfd8e6, last bus=5
[ 0.132008] PCI: Using configuration type 1 for base access
[ 0.132008] Setting up standard PCI resources
[ 0.135417] ACPI: EC: EC description table is found, configuring boot EC
[ 0.144009] ACPI: EC: non-query interrupt received, switching to
interrupt mode
[ 0.162555] ACPI: Interpreter enabled
[ 0.162559] ACPI: (supports S0 S3 S4 S5)
[ 0.162579] ACPI: Using PIC for interrupt routing
[ 0.177013] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.177017] ACPI: EC: driver started in interrupt mode
[ 0.177078] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.177581] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4
ACPI/GPIO/TCO
[ 0.177587] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4
GPIO
[ 0.177884] PCI: Transparent bridge - 0000:00:1e.0
[ 0.177919] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.178019] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.182237] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.182518] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.182795] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.183074] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.183353] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.183609] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0,
disabled.
[ 0.183866] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0,
disabled.
[ 0.184156] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.184732] ACPI: Power Resource [PUBS] (on)
[ 0.184853] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.184895] pnp: PnP ACPI init
[ 0.184903] ACPI: bus type pnp registered
[ 0.190252] pnp: PnP ACPI: found 13 devices
[ 0.190256] ACPI: ACPI bus type pnp unregistered
[ 0.190260] PnPBIOS: Disabled by ACPI PNP
[ 0.190573] PCI: Using ACPI for IRQ routing
[ 0.190761] ACPI: RTC can wake from S4
[ 0.190793] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.190797] system 00:00: iomem range 0xc0000-0xc3fff could not be
reserved
[ 0.190801] system 00:00: iomem range 0xc4000-0xc7fff could not be
reserved
[ 0.190805] system 00:00: iomem range 0xc8000-0xcbfff has been reserved
[ 0.190810] system 00:00: iomem range 0xcc000-0xcffff could not be
reserved
[ 0.190814] system 00:00: iomem range 0xdc000-0xdffff has been reserved
[ 0.190818] system 00:00: iomem range 0xe0000-0xe3fff could not be
reserved
[ 0.190822] system 00:00: iomem range 0xe4000-0xe7fff could not be
reserved
[ 0.190826] system 00:00: iomem range 0xe8000-0xebfff could not be
reserved
[ 0.190830] system 00:00: iomem range 0xec000-0xeffff could not be
reserved
[ 0.190834] system 00:00: iomem range 0xf0000-0xfffff could not be
reserved
[ 0.190839] system 00:00: iomem range 0x100000-0x1fffffff could not be
reserved
[ 0.190843] system 00:00: iomem range 0xfec00000-0xffffffff could not be
reserved
[ 0.190852] system 00:02: ioport range 0x1000-0x107f has been reserved
[ 0.190856] system 00:02: ioport range 0x1180-0x11bf has been reserved
[ 0.190860] system 00:02: ioport range 0x15e0-0x15ef has been reserved
[ 0.190864] system 00:02: ioport range 0x1600-0x167f has been reserved
[ 0.221373] PCI: Bus 3, cardbus bridge: 0000:02:00.0
[ 0.221376] IO window: 0x00003000-0x000030ff
[ 0.221381] IO window: 0x00003400-0x000034ff
[ 0.221386] PREFETCH window: 0xf0000000-0xf3ffffff
[ 0.221391] MEM window: 0xd4000000-0xd7ffffff
[ 0.221395] PCI: Bridge: 0000:00:1e.0
[ 0.221399] IO window: 3000-7fff
[ 0.221404] MEM window: 0xd0200000-0xdfffffff
[ 0.221409] PREFETCH window: 0x00000000f0000000-0x00000000f7ffffff
[ 0.221424] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.221926] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 0.221931] PCI: setting IRQ 11 as level-triggered
[ 0.221935] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11
(level, low) -> IRQ 11
[ 0.221967] NET: Registered protocol family 2
[ 0.222083] IP route cache hash table entries: 4096 (order: 2, 16384
bytes)
[ 0.222334] TCP established hash table entries: 16384 (order: 5, 131072
bytes)
[ 0.222466] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.222595] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.222599] TCP reno registered
[ 0.222689] NET: Registered protocol family 1
[ 0.222833] checking if image is initramfs... it is
[ 0.724064] Switched to high resolution mode on CPU 0
[ 1.085636] Freeing initrd memory: 7034k freed
[ 1.085892] Simple Boot Flag at 0x35 set to 0x1
[ 1.086372] audit: initializing netlink socket (disabled)
[ 1.086393] type=2000 audit(1267594492.084:1): initialized
[ 1.086545] Total HugeTLB memory allocated, 0
[ 1.086645] VFS: Disk quotas dquot_6.5.1
[ 1.086681] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.086731] msgmni has been set to 989
[ 1.086880] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 1.086885] io scheduler noop registered
[ 1.086888] io scheduler anticipatory registered
[ 1.086890] io scheduler deadline registered
[ 1.086906] io scheduler cfq registered (default)
[ 1.086928] pci 0000:00:02.0: Boot video device
[ 1.087007] pci 0000:02:08.0: Firmware left e100 interrupts enabled;
disabling
[ 1.087436] isapnp: Scanning for PnP cards...
[ 1.440491] isapnp: No Plug & Play device found
[ 1.443690] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
[ 1.443804] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 1.443908] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[ 1.444397] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 1.445121] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 1.445126] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11
(level, low) -> IRQ 11
[ 1.445137] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[ 1.446819] brd: module loaded
[ 1.446947] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64
irq 1,12
[ 1.453401] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.453408] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.453584] mice: PS/2 mouse device common for all mice
[ 1.453736] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.453751] rtc0: alarms up to one month, y3k
[ 1.453792] cpuidle: using governor ladder
[ 1.453795] cpuidle: using governor menu
[ 1.453801] No iBFT detected.
[ 1.454354] TCP cubic registered
[ 1.454358] NET: Registered protocol family 17
[ 1.454366] Using IPI No-Shortcut mode
[ 1.454524] registered taskstats version 1
[ 1.454698] rtc_cmos 00:06: setting system clock to 2010-03-03 05:34:53
UTC (1267594493)
[ 1.454845] Freeing unused kernel memory: 244k freed
[ 1.458583] input: AT Translated Set 2 keyboard as /class/input/input0
[ 1.582651] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.582710] ACPI: ACPI0007:00 is registered as cooling_device0
[ 1.582716] ACPI: Processor [CPU] (supports 8 throttling states)
[ 1.584679] Marking TSC unstable due to: TSC halts in idle.
[ 1.585691] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 1.586506] ACPI: Thermal Zone [THM0] (72 C)
[ 2.302354] ACPI: ACPI Dock Station Driver
[ 2.435710] usbcore: registered new interface driver usbfs
[ 2.435749] usbcore: registered new interface driver hub
[ 2.435801] usbcore: registered new device driver usb
[ 2.447070] USB Universal Host Controller Interface driver v3.0
[ 2.447127] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11
(level, low) -> IRQ 11
[ 2.447141] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 2.447146] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.447308] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 1
[ 2.447336] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001820
[ 2.447450] usb usb1: configuration #1 chosen from 1 choice
[ 2.447487] hub 1-0:1.0: USB hub found
[ 2.447495] hub 1-0:1.0: 2 ports detected
[ 2.548198] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.548204] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.548208] usb usb1: Product: UHCI Host Controller
[ 2.548211] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 2.548214] usb usb1: SerialNumber: 0000:00:1d.0
[ 2.548822] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 2.548827] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11
(level, low) -> IRQ 11
[ 2.548841] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 2.548846] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.548879] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 2
[ 2.548905] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001840
[ 2.549008] usb usb2: configuration #1 chosen from 1 choice
[ 2.549043] hub 2-0:1.0: USB hub found
[ 2.549052] hub 2-0:1.0: 2 ports detected
[ 2.580381] SCSI subsystem initialized
[ 2.622152] libata version 3.00 loaded.
[ 2.627061] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[ 2.627066] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2.652183] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.652189] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.652192] usb usb2: Product: UHCI Host Controller
[ 2.652195] usb usb2: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 2.652198] usb usb2: SerialNumber: 0000:00:1d.1
[ 2.652849] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 2.652854] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11
(level, low) -> IRQ 11
[ 2.652869] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 2.652874] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.652907] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 3
[ 2.652932] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001860
[ 2.653032] usb usb3: configuration #1 chosen from 1 choice
[ 2.653067] hub 3-0:1.0: USB hub found
[ 2.653077] hub 3-0:1.0: 2 ports detected
[ 2.748540] Floppy drive(s): fd0 is 1.44M
[ 2.756221] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.756226] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.756230] usb usb3: Product: UHCI Host Controller
[ 2.756233] usb usb3: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 2.756236] usb usb3: SerialNumber: 0000:00:1d.2
[ 2.757590] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 2.757595] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11
(level, low) -> IRQ 11
[ 2.757614] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 2.757620] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.757660] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 4
[ 2.761558] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.761565] PCI: cache line size of 32 is not supported by device
0000:00:1d.7
[ 2.761574] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xd0100000
[ 2.768528] FDC 0 is a National Semiconductor PC87306
[ 2.776176] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10
Dec 2004
[ 2.776279] usb usb4: configuration #1 chosen from 1 choice
[ 2.776318] hub 4-0:1.0: USB hub found
[ 2.776328] hub 4-0:1.0: 6 ports detected
[ 2.880188] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.880193] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.880197] usb usb4: Product: EHCI Host Controller
[ 2.880200] usb usb4: Manufacturer: Linux 2.6.26-2-686 ehci_hcd
[ 2.880203] usb usb4: SerialNumber: 0000:00:1d.7
[ 2.891620] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[ 2.891625] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11
(level, low) -> IRQ 11
[ 2.915417] e100: eth0: e100_probe: addr 0xd0200000, irq 11, MAC addr
00:10:c6:e3:be:55
[ 2.915524] Uniform Multi-Platform E-IDE driver
[ 2.915528] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 2.916227] ICH4: IDE controller (0x8086:0x24ca rev 0x01) at PCI slot
0000:00:1f.1
[ 2.916236] PIIX_IDE 0000:00:1f.1: enabling device (0005 -> 0007)
[ 2.916243] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11
(level, low) -> IRQ 11
[ 2.916253] ICH4: not 100% native mode: will probe irqs later
[ 2.916265] ide0: BM-DMA at 0x1810-0x1817
[ 2.916273] ide1: BM-DMA at 0x1818-0x181f
[ 2.916278] Probing IDE interface ide0...
[ 3.204164] hda: HTS541040G9AT00, ATA DISK drive
[ 3.876084] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 3.876330] hda: UDMA/100 mode selected
[ 3.876569] Probing IDE interface ide1...
[ 4.220127] Clocksource tsc unstable (delta = -332417607 ns)
[ 4.612268] hdc: HL-DT-STCD-RW/DVD DRIVE GCC-4244N, ATAPI CD/DVD-ROM
drive
[ 4.948167] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 4.949136] hdc: UDMA/33 mode selected
[ 4.950164] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.967607] ide1 at 0x170-0x177,0x376 on irq 15
[ 5.013884] hda: max request size: 128KiB
[ 5.014316] hda: 78140160 sectors (40007 MB) w/7539KiB Cache,
CHS=65535/16/63
[ 5.014980] hda: cache flushes supported
[ 5.015037] hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 >
[ 5.091812] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
[ 5.091820] Uniform CD-ROM driver Revision: 3.20
[ 5.505994] PM: Starting manual resume from disk
[ 5.562757] kjournald starting. Commit interval 5 seconds
[ 5.562757] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.919176] udevd version 125 started
[ 7.645613] Non-volatile memory driver v1.2
[ 7.815168] thinkpad_acpi: ThinkPad ACPI Extras v0.20
[ 7.815172] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 7.815175] thinkpad_acpi: ThinkPad BIOS 1VET71WW (1.29 ), EC
1VHT28WW-1.04
[ 7.815179] thinkpad_acpi: IBM ThinkPad R51, model 2887MQ5
[ 7.823346] Registered led device: tpacpi::thinklight
[ 7.823648] Registered led device: tpacpi::power
[ 7.823669] Registered led device: tpacpi:orange:batt
[ 7.823688] Registered led device: tpacpi:green:batt
[ 7.823708] Registered led device: tpacpi::dock_active
[ 7.823728] Registered led device: tpacpi::bay_active
[ 7.823748] Registered led device: tpacpi::dock_batt
[ 7.823769] Registered led device: tpacpi::unknown_led
[ 7.823791] Registered led device: tpacpi::standby
[ 7.826248] input: ThinkPad Extra Buttons as /class/input/input1
[ 8.186593] Linux agpgart interface v0.103
[ 8.201000] agpgart: Detected an Intel 855GM Chipset.
[ 8.201225] agpgart: Detected 8060K stolen memory.
[ 8.210409] agpgart: AGP aperture is 128M @ 0xe0000000
[ 8.488274] input: Power Button (FF) as /class/input/input2
[ 8.518700] ACPI: Power Button (FF) [PWRF]
[ 8.518789] input: Lid Switch as /class/input/input3
[ 8.538710] ACPI: Lid Switch [LID]
[ 8.538786] input: Sleep Button (CM) as /class/input/input4
[ 8.564089] ACPI: Sleep Button (CM) [SLPB]
[ 9.905457] ACPI: AC Adapter [AC] (on-line)
[ 10.208785] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: found ejectable bay
[ 10.208793] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: Adding notify handler
[ 10.208831] ACPI: Error installing bay notify handler
[ 10.226237] ACPI: Battery Slot [BAT0] (battery present)
[ 10.227216] input: Video Bus as /class/input/input5
[ 10.256072] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 10.524267] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 10.579885] intel_rng: FWH not detected
[ 10.580109] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.752800] input: PC Speaker as /class/input/input6
[ 10.770169] ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 11
(level, low) -> IRQ 11
[ 11.450923] Yenta: CardBus bridge found at 0000:02:00.0 [1014:0512]
[ 11.450942] Yenta: Using INTVAL to route CSC interrupts to PCI
[ 11.450945] Yenta: Routing CardBus interrupts to PCI
[ 11.450950] Yenta TI: socket 0000:02:00.0, mfunc 0x01d21022, devctl 0x64
[ 11.630991] NET: Registered protocol family 23
[ 11.680590] Yenta: ISA IRQ mask 0x04b8, PCI irq 11
[ 11.680595] Socket status: 30000007
[ 11.680599] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff
[ 11.680603] cs: IO port probe 0x3000-0x7fff: clean.
[ 11.682371] pcmcia: parent PCI bridge Memory window: 0xd0200000 -
0xdfffffff
[ 11.682374] pcmcia: parent PCI bridge Memory window: 0xf0000000 -
0xf7ffffff
[ 11.785537] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps:
0x884793/0x0
[ 11.785545] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 11.822042] input: SynPS/2 Synaptics TouchPad as /class/input/input7
[ 11.851158] parport_pc 00:0b: reported by Plug and Play ACPI
[ 11.851200] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[ 11.944943] nsc-ircc, chip->init
[ 11.944954] nsc-ircc, Found chip at base=0x02e
[ 11.944978] nsc-ircc, driver loaded (Dag Brattli)
[ 11.944984] nsc_ircc_open(), can't get iobase of 0x2f8
[ 11.945010] nsc-ircc, Found chip at base=0x02e
[ 11.945034] nsc-ircc, driver loaded (Dag Brattli)
[ 11.945037] nsc_ircc_open(), can't get iobase of 0x2f8
[ 11.945642] nsc-ircc 00:0c: disabled
[ 12.044856] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11
(level, low) -> IRQ 11
[ 12.044878] PCI: Setting latency timer of device 0000:00:1f.6 to 64
[ 12.148137] MC'97 1 converters and GPIO not ready (0xff00)
[ 12.149095] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11
(level, low) -> IRQ 11
[ 12.149124] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 12.946308] cs: IO port probe 0x100-0x3af: clean.
[ 12.947216] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 12.947578] cs: IO port probe 0x820-0x8ff: clean.
[ 12.947883] cs: IO port probe 0xc00-0xcf7: clean.
[ 12.948512] cs: IO port probe 0xa00-0xaff: clean.
[ 13.072030] intel8x0_measure_ac97_clock: measured 55441 usecs
[ 13.072036] intel8x0: clocking to 48000
[ 13.462416] Adding 979924k swap on /dev/hda8. Priority:-1 extents:1
across:979924k
[ 13.809840] EXT3 FS on hda1, internal journal
[ 14.032668] loop: module loaded
[ 15.260429] kjournald starting. Commit interval 5 seconds
[ 15.264338] EXT3 FS on hda2, internal journal
[ 15.264344] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.313778] kjournald starting. Commit interval 5 seconds
[ 15.316360] EXT3 FS on hda9, internal journal
[ 15.316365] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.365834] kjournald starting. Commit interval 5 seconds
[ 15.368401] EXT3 FS on hda6, internal journal
[ 15.368405] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.420742] kjournald starting. Commit interval 5 seconds
[ 15.424375] EXT3 FS on hda5, internal journal
[ 15.424380] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.463952] kjournald starting. Commit interval 5 seconds
[ 15.471862] EXT3 FS on hda7, internal journal
[ 15.471866] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.745121] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 16.956957] input: TPPS/2 IBM TrackPoint as /class/input/input8
[ 20.281622] NET: Registered protocol family 10
[ 20.282172] lo: Disabled Privacy Extensions
[ 22.062720] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 22.062726] vboxdrv: Successfully done.
[ 22.062728] vboxdrv: Found 1 processor cores.
[ 22.062818] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 22.062822] vboxdrv: Successfully loaded version 3.1.4 (interface
0x00100001).
[ 23.765672] ttyS1: LSR safety check engaged!
[ 25.122861] Bluetooth: Core ver 2.11
[ 25.125661] NET: Registered protocol family 31
[ 25.125666] Bluetooth: HCI device and connection manager initialized
[ 25.125671] Bluetooth: HCI socket layer initialized
[ 25.278465] Bluetooth: L2CAP ver 2.9
[ 25.278470] Bluetooth: L2CAP socket layer initialized
[ 25.363247] Bluetooth: RFCOMM socket layer initialized
[ 25.363263] Bluetooth: RFCOMM TTY layer initialized
[ 25.363266] Bluetooth: RFCOMM ver 1.8
[ 29.506713] [drm] Initialized drm 1.1.0 20060810
[ 29.512880] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11
(level, low) -> IRQ 11
[ 29.512890] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 29.512991] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 29.513005] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 29.513077] [drm] Initialized i915 1.6.0 20060119 on minor 1
[ 29.662292] thinkpad_acpi: CMOS NVRAM (7) and EC (6) do not agree on
display brightness level
[ 65.576969] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 65.580140] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 65.588136] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 66.980524] vboxNetAdpOpen returns 0
[ 76.340022] eth0: no IPv6 routers present
[ 77.748023] vboxnet0: no IPv6 routers present
[ 95.816318] e100: eth0: e100_watchdog: link down
[ 103.816131] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 121.517122] usb 4-3: new high speed USB device using ehci_hcd and address
2
[ 121.661979] usb 4-3: configuration #1 chosen from 1 choice
[ 121.670658] usb 4-3: New USB device found, idVendor=04cf, idProduct=8818
[ 121.670664] usb 4-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 121.670668] usb 4-3: Product: USB Mass Storage Device
[ 121.670671] usb 4-3: Manufacturer: Myson Century, Inc.
[ 121.670674] usb 4-3: SerialNumber: 100
[ 121.858306] Initializing USB Mass Storage driver...
[ 121.860462] scsi0 : SCSI emulation for USB Mass Storage devices
[ 121.860832] usbcore: registered new interface driver usb-storage
[ 121.860838] USB Mass Storage support registered.
[ 121.881298] usb-storage: device found at 2
[ 121.881302] usb-storage: waiting for device to settle before scanning
[ 126.880241] usb-storage: device scan complete
[ 126.898723] scsi 0:0:0:0: CD-ROM MOSER BAER DH-20A4P
9M74 PQ: 0 ANSI: 0
[ 127.093647] Driver 'sr' needs updating - please use bus_type methods
[ 127.429589] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2
cdda tray
[ 127.429719] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 127.493138] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 128.024162] usb 4-3: reset high speed USB device using ehci_hcd and
address 2
[ 128.520036] usb 4-3: reset high speed USB device using ehci_hcd and
address 2
[ 173.896043] usb 4-3: reset high speed USB device using ehci_hcd and
address 2
[ 263.080043] usb 4-3: reset high speed USB device using ehci_hcd and
address 2
[ 263.252386] usb 4-3: can't restore configuration #1 (error=-71)
[ 263.252463] sr 0:0:0:0: [sr0] Result: hostbyte=DID_ERROR
driverbyte=DRIVER_OK,SUGGEST_OK
[ 263.252470] end_request: I/O error, dev sr0, sector 9176320
[ 263.252474] Buffer I/O error on device sr0, logical block 1147040
[ 263.254149] Buffer I/O error on device sr0, logical block 1147040
[ 263.254202] Buffer I/O error on device sr0, logical block 0
[ 263.254212] Buffer I/O error on device sr0, logical block 1
[ 263.254221] Buffer I/O error on device sr0, logical block 2
[ 263.254229] Buffer I/O error on device sr0, logical block 3
[ 263.254238] Buffer I/O error on device sr0, logical block 4
[ 263.254246] Buffer I/O error on device sr0, logical block 5
[ 263.254254] Buffer I/O error on device sr0, logical block 6
[ 263.254262] Buffer I/O error on device sr0, logical block 7
[ 263.339242] usb 4-3: USB disconnect, address 2
[ 263.448066] usb 4-3: new high speed USB device using ehci_hcd and address
3
[ 263.968029] usb 4-3: device not accepting address 3, error -71
[ 264.080031] usb 4-3: new high speed USB device using ehci_hcd and address
4
[ 264.212991] usb 4-3: configuration #1 chosen from 1 choice
[ 264.220437] scsi1 : SCSI emulation for USB Mass Storage devices
[ 264.220568] usb-storage: device found at 4
[ 264.220571] usb-storage: waiting for device to settle before scanning
[ 264.220815] usb 4-3: New USB device found, idVendor=04cf, idProduct=8818
[ 264.220819] usb 4-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 264.220823] usb 4-3: Product: USB Mass Storage Device
[ 264.220826] usb 4-3: Manufacturer: Myson Century, Inc.
[ 264.220829] usb 4-3: SerialNumber: 100
[ 269.220274] usb-storage: device scan complete
[ 269.221121] scsi 1:0:0:0: CD-ROM MOSER BAER DH-20A4P
9M74 PQ: 0 ANSI: 0
[ 269.225441] sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2
cdda tray
[ 269.225567] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 269.225624] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 299.044038] usb 4-3: reset high speed USB device using ehci_hcd and
address 4
[ 299.924096] usb 4-3: can't restore configuration #1 (error=-71)
[ 299.924182] sr 1:0:0:0: [sr0] Result: hostbyte=DID_ERROR
driverbyte=DRIVER_OK,SUGGEST_OK
[ 299.924204] end_request: I/O error, dev sr0, sector 9176320
[ 299.924209] __ratelimit: 12 messages suppressed
[ 299.924213] Buffer I/O error on device sr0, logical block 1147040
[ 299.925888] Buffer I/O error on device sr0, logical block 1147040
[ 299.925937] Buffer I/O error on device sr0, logical block 0
[ 299.925948] Buffer I/O error on device sr0, logical block 1
[ 299.925956] Buffer I/O error on device sr0, logical block 2
[ 299.925965] Buffer I/O error on device sr0, logical block 3
[ 299.925973] Buffer I/O error on device sr0, logical block 4
[ 299.992354] usb 4-3: USB disconnect, address 4
[ 300.104043] usb 4-3: new high speed USB device using ehci_hcd and address
5
[ 300.624047] usb 4-3: device not accepting address 5, error -71
[ 300.736038] usb 4-3: new high speed USB device using ehci_hcd and address
6
[ 300.869069] usb 4-3: configuration #1 chosen from 1 choice
[ 300.879431] scsi2 : SCSI emulation for USB Mass Storage devices
[ 300.879556] usb-storage: device found at 6
[ 300.879559] usb-storage: waiting for device to settle before scanning
[ 300.880594] usb 4-3: New USB device found, idVendor=04cf, idProduct=8818
[ 300.880599] usb 4-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 300.880603] usb 4-3: Product: USB Mass Storage Device
[ 300.880606] usb 4-3: Manufacturer: Myson Century, Inc.
[ 300.880609] usb 4-3: SerialNumber: 100
[ 305.876219] usb-storage: device scan complete
[ 305.877070] scsi 2:0:0:0: CD-ROM MOSER BAER DH-20A4P
9M74 PQ: 0 ANSI: 0
[ 305.890591] sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2
cdda tray
[ 305.890721] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 305.890778] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 338.560047] usb 4-3: reset high speed USB device using ehci_hcd and
address 6
[ 339.722654] usb 4-3: can't restore configuration #1 (error=-71)
[ 339.722757] sr 2:0:0:0: [sr0] Result: hostbyte=DID_ERROR
driverbyte=DRIVER_OK,SUGGEST_OK
[ 339.722764] end_request: I/O error, dev sr0, sector 9176320
[ 339.722769] __ratelimit: 15 messages suppressed
[ 339.722773] Buffer I/O error on device sr0, logical block 1147040
[ 339.722959] sr 2:0:0:0: [sr0] Result: hostbyte=DID_ERROR
driverbyte=DRIVER_OK,SUGGEST_OK
[ 339.722964] end_request: I/O error, dev sr0, sector 9176320
[ 339.722968] Buffer I/O error on device sr0, logical block 1147040
[ 339.723116] sr 2:0:0:0: [sr0] Result: hostbyte=DID_ERROR
driverbyte=DRIVER_OK,SUGGEST_OK
[ 339.723121] end_request: I/O error, dev sr0, sector 0
[ 339.723125] Buffer I/O error on device sr0, logical block 0
[ 339.723179] sr 2:0:0:0: [sr0] Result: hostbyte=DID_ERROR
driverbyte=DRIVER_OK,SUGGEST_OK
[ 339.723184] end_request: I/O error, dev sr0, sector 8
[ 339.723187] Buffer I/O error on device sr0, logical block 1
[ 339.723191] Buffer I/O error on device sr0, logical block 2
[ 339.723194] Buffer I/O error on device sr0, logical block 3
[ 339.723198] Buffer I/O error on device sr0, logical block 4
[ 339.723201] Buffer I/O error on device sr0, logical block 5
[ 339.795650] usb 4-3: USB disconnect, address 6
[ 339.908072] usb 4-3: new high speed USB device using ehci_hcd and address
7
[ 340.428029] usb 4-3: device not accepting address 7, error -71
[ 340.540954] usb 4-3: new high speed USB device using ehci_hcd and address
8
[ 340.672997] usb 4-3: configuration #1 chosen from 1 choice
[ 340.682642] scsi3 : SCSI emulation for USB Mass Storage devices
[ 340.682767] usb-storage: device found at 8
[ 340.682770] usb-storage: waiting for device to settle before scanning
[ 340.683622] usb 4-3: New USB device found, idVendor=04cf, idProduct=8818
[ 340.683626] usb 4-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 340.683630] usb 4-3: Product: USB Mass Storage Device
[ 340.683633] usb 4-3: Manufacturer: Myson Century, Inc.
[ 340.683636] usb 4-3: SerialNumber: 100
[ 345.680275] usb-storage: device scan complete
[ 345.681122] scsi 3:0:0:0: CD-ROM MOSER BAER DH-20A4P
9M74 PQ: 0 ANSI: 0
[ 345.692849] sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2
cdda tray
[ 345.692984] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 345.693041] sr 3:0:0:0: Attached scsi generic sg0 type 5
[ 369.891137] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 369.976416] ISO 9660 Extensions: RRIP_1991A
[ 411.364036] usb 4-3: reset high speed USB device using ehci_hcd and
address 8
[ 411.780060] usb 4-3: reset high speed USB device using ehci_hcd and
address 8
[ 413.368044] usb 4-3: reset high speed USB device using ehci_hcd and
address 8
[ 413.965964] usb 4-3: can't restore configuration #1 (error=-71)
[ 413.969750] usb 4-3: USB disconnect, address 8
[ 414.088043] usb 4-3: new high speed USB device using ehci_hcd and address
9
[ 414.608029] usb 4-3: device not accepting address 9, error -71
[ 414.720036] usb 4-3: new high speed USB device using ehci_hcd and address
10
[ 414.853045] usb 4-3: configuration #1 chosen from 1 choice
[ 414.862577] scsi4 : SCSI emulation for USB Mass Storage devices
[ 414.862667] usb-storage: device found at 10
[ 414.862670] usb-storage: waiting for device to settle before scanning
[ 414.864602] usb 4-3: New USB device found, idVendor=04cf, idProduct=8818
[ 414.864607] usb 4-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 414.864611] usb 4-3: Product: USB Mass Storage Device
[ 414.864614] usb 4-3: Manufacturer: Myson Century, Inc.
[ 414.864617] usb 4-3: SerialNumber: 100
[ 419.860192] usb-storage: device scan complete
[ 419.861044] scsi 4:0:0:0: CD-ROM MOSER BAER DH-20A4P
9M74 PQ: 0 ANSI: 0
[ 419.906781] sr1: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2
cdda tray
[ 419.906927] sr 4:0:0:0: Attached scsi CD-ROM sr1
[ 419.906982] sr 4:0:0:0: Attached scsi generic sg0 type 5
[ 420.436034] usb 4-3: reset high speed USB device using ehci_hcd and
address 10
[ 422.300037] usb 4-3: reset high speed USB device using ehci_hcd and
address 10
[ 436.544041] usb 4-3: reset high speed USB device using ehci_hcd and
address 10
[ 449.225351] cdrom: This disc doesn't have any tracks I recognize!
[ 508.880035] usb 4-3: reset high speed USB device using ehci_hcd and
address 10
[ 510.544486] usb 4-3: can't restore configuration #1 (error=-71)
[ 510.555038] usb 4-3: USB disconnect, address 10
[ 510.664048] usb 4-3: new high speed USB device using ehci_hcd and address
11
[ 511.184033] usb 4-3: device not accepting address 11, error -71
[ 511.296116] usb 4-3: new high speed USB device using ehci_hcd and address
12
[ 511.428952] usb 4-3: configuration #1 chosen from 1 choice
[ 513.524706] usb 4-3: can't set config #1, error -71
[ 513.524842] usb 4-3: New USB device found, idVendor=04cf, idProduct=8818
[ 513.524847] usb 4-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 513.524851] usb 4-3: Product: USB Mass Storage Device
[ 513.524854] usb 4-3: Manufacturer: Myson Century, Inc.
[ 513.524856] usb 4-3: SerialNumber: 100
[ 652.748047] usb 4-3: USB disconnect, address 12
[ 656.408035] usb 4-3: new high speed USB device using ehci_hcd and address
13
[ 656.553332] usb 4-3: configuration #1 chosen from 1 choice
[ 656.558039] scsi5 : SCSI emulation for USB Mass Storage devices
[ 656.558131] usb-storage: device found at 13
[ 656.558134] usb-storage: waiting for device to settle before scanning
[ 656.558654] usb 4-3: New USB device found, idVendor=04cf, idProduct=8818
[ 656.558659] usb 4-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 656.558662] usb 4-3: Product: USB Mass Storage Device
[ 656.558665] usb 4-3: Manufacturer: Myson Century, Inc.
[ 656.558669] usb 4-3: SerialNumber: 100
[ 661.556234] usb-storage: device scan complete
[ 661.557079] scsi 5:0:0:0: CD-ROM MOSER BAER DH-20A4P
9M74 PQ: 0 ANSI: 0
[ 661.576817] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2
cdda tray
[ 661.576945] sr 5:0:0:0: Attached scsi CD-ROM sr1
[ 661.576999] sr 5:0:0:0: Attached scsi generic sg0 type 5
[ 662.056077] usb 4-3: reset high speed USB device using ehci_hcd and
address 13
[ 664.096073] usb 4-3: reset high speed USB device using ehci_hcd and
address 13
[ 672.260036] usb 4-3: reset high speed USB device using ehci_hcd and
address 13
[ 674.176118] usb 4-3: reset high speed USB device using ehci_hcd and
address 13
[ 674.379592] cdrom: This disc doesn't have any tracks I recognize!
[ 737.464118] usb 4-3: reset high speed USB device using ehci_hcd and
address 13
[ 741.156037] usb 4-3: reset high speed USB device using ehci_hcd and
address 13
[ 741.470426] usb 4-3: can't restore configuration #1 (error=-71)
[ 741.487446] usb 4-3: USB disconnect, address 13
[ 741.600042] usb 4-3: new high speed USB device using ehci_hcd and address
14
[ 742.120031] usb 4-3: device not accepting address 14, error -71
[ 742.248565] usb 4-3: new high speed USB device using ehci_hcd and address
15
[ 742.425517] usb 4-3: configuration #1 chosen from 1 choice
[ 742.747589] usb 4-3: can't set config #1, error -71
[ 742.747721] usb 4-3: New USB device found, idVendor=04cf, idProduct=8818
[ 742.747725] usb 4-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 742.747729] usb 4-3: Product: USB Mass Storage Device
[ 742.747732] usb 4-3: Manufacturer: Myson Century, Inc.
[ 742.747735] usb 4-3: SerialNumber: 100
[ 775.408915] usb 4-3: USB disconnect, address 15
[ 781.548171] usb 4-3: new high speed USB device using ehci_hcd and address
16
[ 781.693054] usb 4-3: configuration #1 chosen from 1 choice
[ 781.694212] scsi6 : SCSI emulation for USB Mass Storage devices
[ 781.694299] usb-storage: device found at 16
[ 781.694302] usb-storage: waiting for device to settle before scanning
[ 781.694607] usb 4-3: New USB device found, idVendor=04cf, idProduct=8818
[ 781.694611] usb 4-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 781.694615] usb 4-3: Product: USB Mass Storage Device
[ 781.694618] usb 4-3: Manufacturer: Myson Century, Inc.
[ 781.694621] usb 4-3: SerialNumber: 100
[ 786.692542] usb-storage: device scan complete
[ 786.705436] scsi 6:0:0:0: CD-ROM MOSER BAER DH-20A4P
9M74 PQ: 0 ANSI: 0
[ 786.845941] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2
cdda tray
[ 786.846075] sr 6:0:0:0: Attached scsi CD-ROM sr1
[ 786.846131] sr 6:0:0:0: Attached scsi generic sg0 type 5
[ 787.132085] usb 4-3: reset high speed USB device using ehci_hcd and
address 16
[ 787.844045] usb 4-3: reset high speed USB device using ehci_hcd and
address 16
[ 790.145886] usb 4-3: can't restore configuration #1 (error=-71)
[ 790.153397] usb 4-3: USB disconnect, address 16
[ 790.264055] usb 4-3: new high speed USB device using ehci_hcd and address
17
[ 790.784098] usb 4-3: device not accepting address 17, error -71
[ 790.896197] usb 4-3: new high speed USB device using ehci_hcd and address
18
[ 791.028984] usb 4-3: configuration #1 chosen from 1 choice
[ 791.068709] usb 4-3: can't set config #1, error -71
[ 791.068846] usb 4-3: New USB device found, idVendor=04cf, idProduct=8818
[ 791.068851] usb 4-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 791.068855] usb 4-3: Product: USB Mass Storage Device
[ 791.068858] usb 4-3: Manufacturer: Myson Century, Inc.
[ 791.068860] usb 4-3: SerialNumber: 100
[ 1096.715318] usb 4-3: USB disconnect, address 18
[ 1100.516046] usb 4-3: new high speed USB device using ehci_hcd and address
19
[ 1100.661012] usb 4-3: configuration #1 chosen from 1 choice
[ 1100.664497] scsi7 : SCSI emulation for USB Mass Storage devices
[ 1100.664586] usb-storage: device found at 19
[ 1100.664589] usb-storage: waiting for device to settle before scanning
[ 1100.665445] usb 4-3: New USB device found, idVendor=04cf, idProduct=8818
[ 1100.665449] usb 4-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 1100.665453] usb 4-3: Product: USB Mass Storage Device
[ 1100.665456] usb 4-3: Manufacturer: Myson Century, Inc.
[ 1100.665459] usb 4-3: SerialNumber: 100
[ 1105.666037] usb-storage: device scan complete
[ 1105.666760] scsi 7:0:0:0: CD-ROM MOSER BAER DH-20A4P
9M74 PQ: 0 ANSI: 0
[ 1105.723738] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2
cdda tray
[ 1105.723885] sr 7:0:0:0: Attached scsi CD-ROM sr1
[ 1105.723938] sr 7:0:0:0: Attached scsi generic sg0 type 5
[ 1108.196083] usb 4-3: reset high speed USB device using ehci_hcd and
address 19
[ 1113.361012] usb 4-3: reset high speed USB device using ehci_hcd and
address 19
[ 1115.471935] cdrom: This disc doesn't have any tracks I recognize!
[ 1141.932047] usb 4-3: reset high speed USB device using ehci_hcd and
address 19
[ 1143.375590] usb 4-3: can't restore configuration #1 (error=-71)
[ 1143.388935] usb 4-3: USB disconnect, address 19
[ 1143.500054] usb 4-3: new high speed USB device using ehci_hcd and address
20
[ 1143.633040] usb 4-3: configuration #1 chosen from 1 choice
[ 1148.113496] usb 4-3: can't set config #1, error -71
[ 1148.113636] usb 4-3: New USB device found, idVendor=04cf, idProduct=8818
[ 1148.113640] usb 4-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 1148.113644] usb 4-3: Product: USB Mass Storage Device
[ 1148.113647] usb 4-3: Manufacturer: Myson Century, Inc.
[ 1148.113650] usb 4-3: SerialNumber: 100
[ 1723.296701] usb 4-3: USB disconnect, address 20
[ 1727.088378] usb 4-3: new high speed USB device using ehci_hcd and address
21
[ 1727.233036] usb 4-3: configuration #1 chosen from 1 choice
[ 1727.240480] scsi8 : SCSI emulation for USB Mass Storage devices
[ 1727.240566] usb-storage: device found at 21
[ 1727.240569] usb-storage: waiting for device to settle before scanning
[ 1727.243181] usb 4-3: New USB device found, idVendor=04cf, idProduct=8818
[ 1727.243187] usb 4-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 1727.243191] usb 4-3: Product: USB Mass Storage Device
[ 1727.243194] usb 4-3: Manufacturer: Myson Century, Inc.
[ 1727.243197] usb 4-3: SerialNumber: 100
[ 1732.240477] usb-storage: device scan complete
[ 1732.243095] scsi 8:0:0:0: CD-ROM MOSER BAER DH-20A4P
9M74 PQ: 0 ANSI: 0
[ 1733.142972] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2
cdda tray
[ 1733.143101] sr 8:0:0:0: Attached scsi CD-ROM sr1
[ 1733.143154] sr 8:0:0:0: Attached scsi generic sg0 type 5
[ 1734.448035] usb 4-3: reset high speed USB device using ehci_hcd and
address 21
[ 1736.424037] usb 4-3: reset high speed USB device using ehci_hcd and
address 21
[ 1736.848041] usb 4-3: reset high speed USB device using ehci_hcd and
address 21
[ 1738.116037] usb 4-3: reset high speed USB device using ehci_hcd and
address 21
[ 1740.304078] usb 4-3: reset high speed USB device using ehci_hcd and
address 21
[ 1742.352037] usb 4-3: reset high speed USB device using ehci_hcd and
address 21
[ 1744.468039] usb 4-3: reset high speed USB device using ehci_hcd and
address 21
[ 1746.190270] cdrom: This disc doesn't have any tracks I recognize!
[ 1871.708038] usb 4-3: reset high speed USB device using ehci_hcd and
address 21
[ 1874.960093] usb 4-3: reset high speed USB device using ehci_hcd and
address 21
[ 1878.104584] usb 4-3: can't restore configuration #1 (error=-71)
[ 1878.119299] usb 4-3: USB disconnect, address 21
[ 1878.228083] usb 4-3: new high speed USB device using ehci_hcd and address
22
[ 1878.748040] usb 4-3: device not accepting address 22, error -71
[ 1878.860043] usb 4-3: new high speed USB device using ehci_hcd and address
23
[ 1878.993057] usb 4-3: configuration #1 chosen from 1 choice
[ 1879.519137] usb 4-3: can't set config #1, error -71
[ 1879.519269] usb 4-3: New USB device found, idVendor=04cf, idProduct=8818
[ 1879.519274] usb 4-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 1879.519277] usb 4-3: Product: USB Mass Storage Device
[ 1879.519280] usb 4-3: Manufacturer: Myson Century, Inc.
[ 1879.519283] usb 4-3: SerialNumber: 100
[ 1923.120202] usb 4-3: USB disconnect, address 23
[ 1932.372623] usb 4-3: new high speed USB device using ehci_hcd and address
24
[ 1932.519326] usb 4-3: configuration #1 chosen from 1 choice
[ 1932.520682] scsi9 : SCSI emulation for USB Mass Storage devices
[ 1932.520771] usb-storage: device found at 24
[ 1932.520774] usb-storage: waiting for device to settle before scanning
[ 1932.521007] usb 4-3: New USB device found, idVendor=04cf, idProduct=8818
[ 1932.521011] usb 4-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 1932.521015] usb 4-3: Product: USB Mass Storage Device
[ 1932.521018] usb 4-3: Manufacturer: Myson Century, Inc.
[ 1932.521021] usb 4-3: SerialNumber: 100
[ 1937.523787] usb-storage: device scan complete
[ 1937.524576] scsi 9:0:0:0: CD-ROM MOSER BAER DH-20A4P
9M74 PQ: 0 ANSI: 0
[ 1937.581684] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2
cdda tray
[ 1937.581827] sr 9:0:0:0: Attached scsi CD-ROM sr1
[ 1937.581882] sr 9:0:0:0: Attached scsi generic sg0 type 5
[ 1946.876831] usb 4-3: reset high speed USB device using ehci_hcd and
address 24
[ 1948.237768] cdrom: This disc doesn't have any tracks I recognize!
[ 1969.344086] usb 4-3: reset high speed USB device using ehci_hcd and
address 24
[ 1972.628454] usb 4-3: can't restore configuration #1 (error=-71)
[ 1972.642107] usb 4-3: USB disconnect, address 24
[ 1972.752303] usb 4-3: new high speed USB device using ehci_hcd and address
25
[ 1973.272110] usb 4-3: device not accepting address 25, error -71
[ 1973.384042] usb 4-3: new high speed USB device using ehci_hcd and address
26
[ 1973.517043] usb 4-3: configuration #1 chosen from 1 choice
[ 1975.880119] usb 4-3: can't set config #1, error -71
[ 1975.880259] usb 4-3: New USB device found, idVendor=04cf, idProduct=8818
[ 1975.880263] usb 4-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 1975.880267] usb 4-3: Product: USB Mass Storage Device
[ 1975.880270] usb 4-3: Manufacturer: Myson Century, Inc.
[ 1975.880273] usb 4-3: SerialNumber: 100
[ 1995.116449] usb 4-3: USB disconnect, address 26
[ 1998.536114] usb 4-3: new high speed USB device using ehci_hcd and address
27
[ 1998.681322] usb 4-3: configuration #1 chosen from 1 choice
[ 1998.682396] scsi10 : SCSI emulation for USB Mass Storage devices
[ 1998.682482] usb-storage: device found at 27
[ 1998.682485] usb-storage: waiting for device to settle before scanning
[ 1998.682742] usb 4-3: New USB device found, idVendor=04cf, idProduct=8818
[ 1998.682746] usb 4-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 1998.682750] usb 4-3: Product: USB Mass Storage Device
[ 1998.682753] usb 4-3: Manufacturer: Myson Century, Inc.
[ 1998.682756] usb 4-3: SerialNumber: 100
[ 2003.680212] usb-storage: device scan complete
[ 2003.693825] scsi 10:0:0:0: CD-ROM MOSER BAER DH-20A4P
9M74 PQ: 0 ANSI: 0
[ 2003.834312] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2
cdda tray
[ 2003.834443] sr 10:0:0:0: Attached scsi CD-ROM sr1
[ 2003.834496] sr 10:0:0:0: Attached scsi generic sg0 type 5
[ 2011.354295] cdrom: This disc doesn't have any tracks I recognize!
[ 2139.028043] usb 4-3: reset high speed USB device using ehci_hcd and
address 27
[ 2139.312037] usb 4-3: reset high speed USB device using ehci_hcd and
address 27
[ 2140.234004] cdrom: This disc doesn't have any tracks I recognize!
[ 2175.280078] usb 4-3: reset high speed USB device using ehci_hcd and
address 27
[ 2175.624062] usb 4-3: reset high speed USB device using ehci_hcd and
address 27
[ 2237.999662] warning: `growisofs' uses 32-bit capabilities (legacy support
in use)
[ 2245.980041] usb 4-3: reset high speed USB device using ehci_hcd and
address 27
[ 2246.859386] usb 4-3: can't restore configuration #1 (error=-71)
[ 2246.867581] usb 4-3: USB disconnect, address 27
[ 2247.040044] usb 4-3: new high speed USB device using ehci_hcd and address
28
[ 2247.560028] usb 4-3: device not accepting address 28, error -71
[ 2247.672043] usb 4-3: new high speed USB device using ehci_hcd and address
29
[ 2247.804965] usb 4-3: configuration #1 chosen from 1 choice
[ 2252.804187] usb 4-3: can't set config #1, error -110
[ 2252.804317] usb 4-3: New USB device found, idVendor=04cf, idProduct=8818
[ 2252.804321] usb 4-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 2252.804325] usb 4-3: Product: USB Mass Storage Device
[ 2252.804328] usb 4-3: Manufacturer: Myson Century, Inc.
[ 2252.804331] usb 4-3: SerialNumber: 100
[ 2267.429934] usb 4-3: USB disconnect, address 29
[ 2271.256047] usb 4-3: new high speed USB device using ehci_hcd and address
30
[ 2271.400987] usb 4-3: configuration #1 chosen from 1 choice
[ 2271.408322] scsi11 : SCSI emulation for USB Mass Storage devices
[ 2271.408409] usb-storage: device found at 30
[ 2271.408412] usb-storage: waiting for device to settle before scanning
[ 2271.411062] usb 4-3: New USB device found, idVendor=04cf, idProduct=8818
[ 2271.411068] usb 4-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 2271.411072] usb 4-3: Product: USB Mass Storage Device
[ 2271.411075] usb 4-3: Manufacturer: Myson Century, Inc.
[ 2271.411078] usb 4-3: SerialNumber: 100
[ 2276.408251] usb-storage: device scan complete
[ 2276.412739] scsi 11:0:0:0: CD-ROM MOSER BAER DH-20A4P
9M74 PQ: 0 ANSI: 0
[ 2276.495730] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2
cdda tray
[ 2276.495861] sr 11:0:0:0: Attached scsi CD-ROM sr1
[ 2276.495914] sr 11:0:0:0: Attached scsi generic sg0 type 5
[ 2292.220045] usb 4-3: reset high speed USB device using ehci_hcd and
address 30
[ 2407.480906] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 2407.584378] ISO 9660 Extensions: RRIP_1991A
[ 2414.168041] usb 4-3: reset high speed USB device using ehci_hcd and
address 30
root:/home/user# exit
Script done on Wednesday 03 March 2010 11:49:09 AM IST
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/pkg-opt-media-team/attachments/20100303/87951690/attachment-0001.htm>
More information about the Pkg-opt-media-team
mailing list