[Pkg-phototools-devel] Bug#459017: News about #459017?

[Andy Goss]

On Fri, 20 Mar 2009 02:36:12 pm Cyril Brulebois wrote:
> Hello,
> 
> looking at the soon-to-be-uploaded (a few hours) 2.4.4-1 package, the
> following IDs are known:
> | ./camlibs/sierra/sierra.c:	{"Olympus", "SP-500UZ", 	SIERRA_MODEL_CAM_DESC,	0x07b4, 0x109,
> | ./camlibs/sierra/sierra.c:	{"Olympus", "C-370Z", 	SIERRA_MODEL_CAM_DESC,	0x07b4, 0x109,
> | ./camlibs/sierra/sierra.c:	{"Olympus", "X-450", 	SIERRA_MODEL_CAM_DESC,	0x07b4, 0x109,
> | ./camlibs/sierra/sierra.c:	{"Olympus", "D-535Z", 	SIERRA_MODEL_CAM_DESC,	0x07b4, 0x109,
> | ./camlibs/sierra/sierra.c:	{"Olympus", "fe-200", 	SIERRA_MODEL_CAM_DESC,	0x07b4, 0x109,
> 
> Furthermore, one can see (./packaging/generic/print-camera-list.c):
> |                 if (a->usb_vendor == 0x07b4 && (a->usb_product == 0x105 || a->usb_product == 0x109) ) {
> |                         /* Marcus says: The Olympus Sierra/Storage dual mode camera firmware.
> |                          * Some HAL using software gets deeply confused by this being here
> |                          * and also detected as mass storage elsewhere, so blacklist
> |                          * it here.
> |                          */
> |                         return 0;
> 
> So I'd think this bug might be fixed. If you can't wait for 2.4.4-1 in
> unstable, you could give a try with 2.4.3-1 (in experimental).
> 
> If your problem still isn't fixed, we'll try and debug that together.
> 
> Thanks for your time.
> 
> Mraw,
> KiBi.
> 

This problem seems to be limited to Etch, the camera connects perfectly in Lenny.

Andy