Bug#771105: pulseaudio: Loops on daemon respawn
David Lynam
david.lynam at redbrick.dcu.ie
Wed Nov 26 21:41:29 UTC 2014
If I have Clementine open and it's trying to play something while stuck, it will get to about 10% CPU.
If GNOME Shell is the cause (for example, if I hold down the volume
change key combination), this reaches about 5% CPU.
During YouTube playback, Iceweasel gets to 13-15% CPU.
For a few seconds during the start of the loop, two Pulseaudio processes
will reach 3-5% CPU each, then die down a bit.
However, if I trigger this with a volume change, a few seconds later I
can still hear the looping and GNOME Shell is a bit unresponsive, but
none of the processes in question register >0.0% CPU usage.
I added tsched=0 because I was getting horrific distortion and echoing
from the likes of Google Hangouts. I thought timer-based scheduling was
on by default and tsched=0 enables the older, interrupt-based
scheduling.
Log is attached. The problem is present from the very start of the
process. In it, I:
- change volume via GNOME shell
- play a song in Clementine (and kill Clementine)
- play a sound in Iceweasel
- play a YouTube video in Iceweasel (uses non-free Flash)
Regards,
David
On Wed, Nov 26, 2014 at 05:32:54PM -0300, Felipe Sateler wrote:
> On Wed, Nov 26, 2014 at 5:26 PM, David Lynam
> <david.lynam at redbrick.dcu.ie> wrote:
> > Killing/restarting Clementine doesn't make a difference.
> >
> > I actually just rebooted a few minutes ago. As soon as GNOME loaded,
> > before doing anything else, I adjusted my volume (it was muted). The
> > problem appeared immediately. Is PA trying to restore some kind of
> > broken state?
> >
> > I have attached a syslog snippet from a couple of minutes ago.
>
> Is the cpu usage high when this happens? If so, is pulseaudio or the
> client using the cpu?
>
> Please run pulseaudio in verbose mode and attach that log[1].
>
> BTW, why did you add tsched=0 ? The default is to disable timer based
> scheduling as well.
>
> [1] https://wiki.ubuntu.com/PulseAudio/Log
>
> --
>
> Saludos,
> Felipe Sateler
>
--
Please consider using PGP to encrypt/sign your e-mails so that nobody other than
the intended recipient can read them. Privacy is important.
My public PGP key: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xDA2E99B41C39C7D2
-------------- next part --------------
( 0.000| 0.000) I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
( 0.000| 0.000) I: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
( 0.000| 0.000) D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
( 0.008| 0.007) D: [pulseaudio] core-util.c: RealtimeKit worked.
( 0.008| 0.000) I: [pulseaudio] core-util.c: Successfully gained nice level -11.
( 0.008| 0.000) I: [pulseaudio] main.c: This is PulseAudio 5.0
( 0.008| 0.000) D: [pulseaudio] main.c: Compilation host: x86_64-pc-linux-gnu
( 0.008| 0.000) D: [pulseaudio] main.c: Compilation CFLAGS: -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wall -W -Wextra -pipe -Wno-long-long -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -fno-common -fdiagnostics-show-option
( 0.008| 0.000) D: [pulseaudio] main.c: Running on host: Linux x86_64 3.16.0-4-amd64 #1 SMP Debian 3.16.7-2 (2014-11-06)
( 0.008| 0.000) D: [pulseaudio] main.c: Found 4 CPUs.
( 0.008| 0.000) I: [pulseaudio] main.c: Page size is 4096 bytes
( 0.008| 0.000) D: [pulseaudio] main.c: Compiled with Valgrind support: no
( 0.008| 0.000) D: [pulseaudio] main.c: Running in valgrind mode: no
( 0.008| 0.000) D: [pulseaudio] main.c: Running in VM: no
( 0.008| 0.000) D: [pulseaudio] main.c: Optimized build: yes
( 0.008| 0.000) D: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
( 0.008| 0.000) I: [pulseaudio] main.c: Machine ID is fb75a029cab0d31b5676ade754660933.
( 0.008| 0.000) I: [pulseaudio] main.c: Session ID is 1.
( 0.008| 0.000) I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
( 0.008| 0.000) I: [pulseaudio] main.c: Using state directory /home/david/.pulse.
( 0.008| 0.000) I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-5.0/modules.
( 0.008| 0.000) I: [pulseaudio] main.c: Running in system mode: no
( 0.008| 0.000) I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
( 0.009| 0.000) D: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
( 0.009| 0.000) I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2 MMXEXT
( 0.009| 0.000) I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
( 0.009| 0.000) I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
( 0.009| 0.000) I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
( 0.009| 0.000) I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
( 0.009| 0.000) I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
( 0.009| 0.000) I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
( 0.010| 0.001) D: [pulseaudio] database-tdb.c: Opened TDB database '/home/david/.pulse/fb75a029cab0d31b5676ade754660933-device-volumes.tdb'
( 0.010| 0.000) I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/david/.pulse/fb75a029cab0d31b5676ade754660933-device-volumes'.
( 0.010| 0.000) I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
( 0.011| 0.000) D: [pulseaudio] database-tdb.c: Opened TDB database '/home/david/.pulse/fb75a029cab0d31b5676ade754660933-stream-volumes.tdb'
( 0.011| 0.000) I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/david/.pulse/fb75a029cab0d31b5676ade754660933-stream-volumes'.
( 0.012| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 added for object /org/pulseaudio/stream_restore1
( 0.012| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry0
( 0.012| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry1
( 0.012| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry2
( 0.012| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry3
( 0.012| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry4
( 0.012| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry5
( 0.012| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry6
( 0.012| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry7
( 0.012| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry8
( 0.012| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry9
( 0.012| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry10
( 0.012| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry11
( 0.013| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry12
( 0.013| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry13
( 0.013| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry14
( 0.013| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry15
( 0.013| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry16
( 0.013| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry17
( 0.013| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry18
( 0.013| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry19
( 0.013| 0.000) I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
( 0.014| 0.000) D: [pulseaudio] database-tdb.c: Opened TDB database '/home/david/.pulse/fb75a029cab0d31b5676ade754660933-card-database.tdb'
( 0.014| 0.000) I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/david/.pulse/fb75a029cab0d31b5676ade754660933-card-database'.
( 0.014| 0.000) I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
( 0.015| 0.000) I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
( 0.015| 0.000) I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
( 0.015| 0.000) D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-udev-detect.so': success
( 0.018| 0.002) D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
( 0.018| 0.000) D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:01.1/sound/card0 is busy: no
( 0.018| 0.000) D: [pulseaudio] module-udev-detect.c: Loading module-alsa-card with arguments 'device_id="0" name="pci-0000_00_01.1" card_name="alsa_card.pci-0000_00_01.1" namereg_fail=false tsched=no fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"'
( 0.025| 0.007) D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus session bus 70b5672007b845f70d0dfe0f54763862 as :1.93
( 0.026| 0.000) D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio0'
( 0.026| 0.000) I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HD-Audio Generic/HD-Audio Generic.conf
( 0.026| 0.000) I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HD-Audio Generic
( 0.026| 0.000) I: [pulseaudio] (alsa-lib)main.c: error: failed to import HD-Audio Generic use case configuration -2
( 0.026| 0.000) I: [pulseaudio] alsa-ucm.c: UCM not available for card HD-Audio Generic
( 0.028| 0.001) D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-mono
( 0.028| 0.000) D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
( 0.028| 0.000) D: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
( 0.031| 0.003) I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0c' failed (-2)
( 0.031| 0.000) I: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: No such file or directory
( 0.031| 0.000) D: [pulseaudio] alsa-mixer.c: Caching failure to open input:analog-mono
( 0.031| 0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-stereo
( 0.031| 0.000) D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
( 0.031| 0.000) D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
( 0.037| 0.005) I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0c' failed (-2)
( 0.037| 0.000) I: [pulseaudio] alsa-util.c: Error opening PCM device front:0: No such file or directory
( 0.037| 0.000) D: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
( 0.037| 0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0c' failed (-2)
( 0.037| 0.000) I: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: No such file or directory
( 0.037| 0.000) D: [pulseaudio] alsa-mixer.c: Caching failure to open input:analog-stereo
( 0.037| 0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-4-channel-input
( 0.037| 0.000) D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog 4-channel Input (analog-4-channel-input)
( 0.037| 0.000) D: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
( 0.037| 0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0c' failed (-2)
( 0.037| 0.000) I: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: No such file or directory
( 0.037| 0.000) D: [pulseaudio] alsa-mixer.c: Caching failure to open input:analog-4-channel-input
( 0.037| 0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile input:iec958-stereo
( 0.037| 0.000) D: [pulseaudio] alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
( 0.037| 0.000) D: [pulseaudio] alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
( 0.038| 0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
( 0.038| 0.000) I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or directory
( 0.038| 0.000) D: [pulseaudio] alsa-mixer.c: Caching failure to open input:iec958-stereo
( 0.038| 0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-mono
( 0.038| 0.000) D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
( 0.038| 0.000) D: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
( 0.038| 0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
( 0.038| 0.000) I: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: No such file or directory
( 0.038| 0.000) D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-mono
( 0.038| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:analog-mono - will not be able to open output:analog-mono
( 0.038| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:analog-stereo - will not be able to open output:analog-mono
( 0.038| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:analog-4-channel-input - will not be able to open output:analog-mono
( 0.038| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:iec958-stereo - will not be able to open output:analog-mono
( 0.038| 0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-stereo
( 0.038| 0.000) D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Stereo (analog-stereo)
( 0.038| 0.000) D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
( 0.038| 0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
( 0.039| 0.000) I: [pulseaudio] alsa-util.c: Error opening PCM device front:0: No such file or directory
( 0.039| 0.000) D: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
( 0.039| 0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
( 0.039| 0.000) I: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: No such file or directory
( 0.039| 0.000) D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-stereo
( 0.039| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:analog-mono - will not be able to open output:analog-stereo
( 0.039| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:analog-stereo - will not be able to open output:analog-stereo
( 0.039| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:analog-4-channel-input - will not be able to open output:analog-stereo
( 0.039| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:iec958-stereo - will not be able to open output:analog-stereo
( 0.039| 0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-40
( 0.039| 0.000) D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.0 (analog-surround-40)
( 0.039| 0.000) D: [pulseaudio] alsa-util.c: Trying surround40:0 with SND_PCM_NO_AUTO_FORMAT ...
( 0.039| 0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
( 0.039| 0.000) I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:0: No such file or directory
( 0.039| 0.000) D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-40
( 0.039| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:analog-mono - will not be able to open output:analog-surround-40
( 0.039| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:analog-stereo - will not be able to open output:analog-surround-40
( 0.039| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:analog-4-channel-input - will not be able to open output:analog-surround-40
( 0.039| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:iec958-stereo - will not be able to open output:analog-surround-40
( 0.039| 0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-41
( 0.039| 0.000) D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.1 (analog-surround-41)
( 0.039| 0.000) D: [pulseaudio] alsa-util.c: Trying surround41:0 with SND_PCM_NO_AUTO_FORMAT ...
( 0.040| 0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
( 0.040| 0.000) I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:0: No such file or directory
( 0.040| 0.000) D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-41
( 0.040| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:analog-mono - will not be able to open output:analog-surround-41
( 0.040| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:analog-stereo - will not be able to open output:analog-surround-41
( 0.040| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:analog-4-channel-input - will not be able to open output:analog-surround-41
( 0.040| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:iec958-stereo - will not be able to open output:analog-surround-41
( 0.040| 0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-50
( 0.040| 0.000) D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.0 (analog-surround-50)
( 0.040| 0.000) D: [pulseaudio] alsa-util.c: Trying surround50:0 with SND_PCM_NO_AUTO_FORMAT ...
( 0.040| 0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
( 0.040| 0.000) I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:0: No such file or directory
( 0.040| 0.000) D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-50
( 0.040| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:analog-mono - will not be able to open output:analog-surround-50
( 0.040| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:analog-stereo - will not be able to open output:analog-surround-50
( 0.040| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:analog-4-channel-input - will not be able to open output:analog-surround-50
( 0.040| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:iec958-stereo - will not be able to open output:analog-surround-50
( 0.040| 0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-51
( 0.040| 0.000) D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.1 (analog-surround-51)
( 0.040| 0.000) D: [pulseaudio] alsa-util.c: Trying surround51:0 with SND_PCM_NO_AUTO_FORMAT ...
( 0.040| 0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
( 0.040| 0.000) I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:0: No such file or directory
( 0.040| 0.000) D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-51
( 0.040| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:analog-mono - will not be able to open output:analog-surround-51
( 0.040| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:analog-stereo - will not be able to open output:analog-surround-51
( 0.040| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:analog-4-channel-input - will not be able to open output:analog-surround-51
( 0.040| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:iec958-stereo - will not be able to open output:analog-surround-51
( 0.040| 0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-71
( 0.041| 0.000) D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 7.1 (analog-surround-71)
( 0.041| 0.000) D: [pulseaudio] alsa-util.c: Trying surround71:0 with SND_PCM_NO_AUTO_FORMAT ...
( 0.041| 0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
( 0.041| 0.000) I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:0: No such file or directory
( 0.041| 0.000) D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-71
( 0.041| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:analog-mono - will not be able to open output:analog-surround-71
( 0.041| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:analog-stereo - will not be able to open output:analog-surround-71
( 0.041| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:analog-4-channel-input - will not be able to open output:analog-surround-71
( 0.041| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:iec958-stereo - will not be able to open output:analog-surround-71
( 0.041| 0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-stereo
( 0.041| 0.000) D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (IEC958) (iec958-stereo)
( 0.041| 0.000) D: [pulseaudio] alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
( 0.041| 0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1p' failed (-2)
( 0.041| 0.000) I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or directory
( 0.041| 0.000) D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-stereo
( 0.041| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:analog-mono - will not be able to open output:iec958-stereo
( 0.041| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:analog-stereo - will not be able to open output:iec958-stereo
( 0.041| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:analog-4-channel-input - will not be able to open output:iec958-stereo
( 0.041| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:iec958-stereo - will not be able to open output:iec958-stereo
( 0.041| 0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-ac3-surround-40
( 0.041| 0.000) D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958/AC3) (iec958-ac3-surround-40)
( 0.041| 0.000) D: [pulseaudio] alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
( 0.041| 0.000) I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
( 0.042| 0.000) I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file or directory
( 0.042| 0.000) D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-ac3-surround-40
( 0.042| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:analog-mono - will not be able to open output:iec958-ac3-surround-40
( 0.042| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:analog-stereo - will not be able to open output:iec958-ac3-surround-40
( 0.042| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:analog-4-channel-input - will not be able to open output:iec958-ac3-surround-40
( 0.042| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:iec958-stereo - will not be able to open output:iec958-ac3-surround-40
( 0.042| 0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-ac3-surround-51
( 0.042| 0.000) D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/AC3) (iec958-ac3-surround-51)
( 0.042| 0.000) D: [pulseaudio] alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
( 0.042| 0.000) I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
( 0.042| 0.000) I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file or directory
( 0.042| 0.000) D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-ac3-surround-51
( 0.042| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:analog-mono - will not be able to open output:iec958-ac3-surround-51
( 0.042| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:analog-stereo - will not be able to open output:iec958-ac3-surround-51
( 0.042| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:analog-4-channel-input - will not be able to open output:iec958-ac3-surround-51
( 0.042| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:iec958-stereo - will not be able to open output:iec958-ac3-surround-51
( 0.042| 0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-dts-surround-51
( 0.042| 0.000) D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/DTS) (iec958-dts-surround-51)
( 0.042| 0.000) D: [pulseaudio] alsa-util.c: Trying dca:0 with SND_PCM_NO_AUTO_FORMAT ...
( 0.042| 0.000) I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:0
( 0.042| 0.000) I: [pulseaudio] alsa-util.c: Error opening PCM device dca:0: No such file or directory
( 0.042| 0.000) D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-dts-surround-51
( 0.042| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:analog-mono - will not be able to open output:iec958-dts-surround-51
( 0.042| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:analog-stereo - will not be able to open output:iec958-dts-surround-51
( 0.042| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:analog-4-channel-input - will not be able to open output:iec958-dts-surround-51
( 0.042| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:iec958-stereo - will not be able to open output:iec958-dts-surround-51
( 0.042| 0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-stereo
( 0.042| 0.000) D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (HDMI) (hdmi-stereo)
( 0.042| 0.000) D: [pulseaudio] alsa-util.c: Trying hdmi:0 with SND_PCM_NO_AUTO_FORMAT ...
( 0.043| 0.000) D: [pulseaudio] alsa-util.c: Managed to open hdmi:0
( 0.043| 0.000) D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 371 ms
( 0.043| 0.000) D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
( 0.043| 0.000) D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-stereo supported.
( 0.043| 0.000) I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0
( 0.043| 0.000) I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0: No such file or directory
( 0.043| 0.000) I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
( 0.043| 0.000) D: [pulseaudio] alsa-mixer.c: Probing path 'hdmi-output-0'
( 0.043| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'HDMI/DP,pcm=3 Jack' succeeded (found!)
( 0.043| 0.000) D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
( 0.043| 0.000) D: [pulseaudio] alsa-mixer.c: Path Set 0x1cf9580, direction=1
( 0.043| 0.000) D: [pulseaudio] alsa-mixer.c: Path hdmi-output-0 (HDMI / DisplayPort), direction=1, priority=59, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf
( 0.043| 0.000) D: [pulseaudio] alsa-mixer.c: Jack HDMI/DP,pcm=3, alsa_name='HDMI/DP,pcm=3 Jack', detection possible
( 0.043| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:analog-mono - will not be able to open input:analog-mono
( 0.043| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:analog-stereo - will not be able to open input:analog-stereo
( 0.043| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:analog-4-channel-input - will not be able to open input:analog-4-channel-input
( 0.043| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:iec958-stereo - will not be able to open input:iec958-stereo
( 0.044| 0.000) D: [pulseaudio] alsa-mixer.c: Profile set 0x1cad790, auto_profiles=yes, probed=yes, n_mappings=1, n_profiles=1, n_decibel_fixes=0
( 0.044| 0.000) D: [pulseaudio] alsa-mixer.c: Mapping hdmi-stereo (Digital Stereo (HDMI)), priority=54, channel_map=front-left,front-right, supported=yes, direction=1
( 0.044| 0.000) D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-stereo (Digital Stereo (HDMI) Output), priority=5400, supported=yes n_input_mappings=0, n_output_mappings=1
( 0.044| 0.000) D: [pulseaudio] alsa-mixer.c: Output hdmi-stereo
( 0.044| 0.000) I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_00_01.1.
( 0.044| 0.000) I: [pulseaudio] card.c: Created 0 "alsa_card.pci-0000_00_01.1"
( 0.044| 0.000) D: [pulseaudio] module-alsa-card.c: Found 1 jacks.
( 0.044| 0.000) I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
( 0.044| 0.000) D: [pulseaudio] module-alsa-card.c: Jack 'HDMI/DP,pcm=3 Jack' is now unplugged
( 0.044| 0.000) D: [pulseaudio] device-port.c: Setting port hdmi-output-0 to status no
( 0.044| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 0.044| 0.000) D: [pulseaudio] module-switch-on-port-available.c: finding port hdmi-output-0
( 0.045| 0.000) D: [pulseaudio] reserve-wrap.c: Successfully create reservation lock monitor for device 'Audio0'
( 0.045| 0.000) D: [pulseaudio] alsa-util.c: Trying hdmi:0 with SND_PCM_NO_AUTO_FORMAT ...
( 0.045| 0.000) D: [pulseaudio] alsa-util.c: Managed to open hdmi:0
( 0.045| 0.000) D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 371 ms
( 0.046| 0.000) D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
( 0.046| 0.000) I: [pulseaudio] alsa-sink.c: Successfully opened device hdmi:0.
( 0.046| 0.000) I: [pulseaudio] alsa-sink.c: Selected mapping 'Digital Stereo (HDMI)' (hdmi-stereo).
( 0.046| 0.000) I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
( 0.046| 0.000) I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0
( 0.046| 0.000) I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0: No such file or directory
( 0.046| 0.000) I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
( 0.046| 0.000) D: [pulseaudio] alsa-mixer.c: Added 1 ports
( 0.046| 0.000) I: [pulseaudio] module-device-restore.c: Restoring port for sink sink:alsa_output.pci-0000_00_01.1.hdmi-stereo.
( 0.046| 0.000) D: [pulseaudio] module-switch-on-port-available.c: Switching initial port for sink 'alsa_output.pci-0000_00_01.1.hdmi-stereo' to 'hdmi-output-0'
( 0.046| 0.000) I: [pulseaudio] module-device-restore.c: Restoring volume for sink alsa_output.pci-0000_00_01.1.hdmi-stereo: front-left: 64071 / 98%, front-right: 64071 / 98%
( 0.046| 0.000) I: [pulseaudio] sink.c: Created sink 0 "alsa_output.pci-0000_00_01.1.hdmi-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
( 0.046| 0.000) I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
( 0.046| 0.000) I: [pulseaudio] sink.c: device.api = "alsa"
( 0.046| 0.000) I: [pulseaudio] sink.c: device.class = "sound"
( 0.046| 0.000) I: [pulseaudio] sink.c: alsa.class = "generic"
( 0.046| 0.000) I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
( 0.046| 0.000) I: [pulseaudio] sink.c: alsa.name = "HDMI 0"
( 0.046| 0.000) I: [pulseaudio] sink.c: alsa.id = "HDMI 0"
( 0.046| 0.000) I: [pulseaudio] sink.c: alsa.subdevice = "0"
( 0.046| 0.000) I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
( 0.046| 0.000) I: [pulseaudio] sink.c: alsa.device = "3"
( 0.046| 0.000) I: [pulseaudio] sink.c: alsa.card = "0"
( 0.046| 0.000) I: [pulseaudio] sink.c: alsa.card_name = "HD-Audio Generic"
( 0.046| 0.000) I: [pulseaudio] sink.c: alsa.long_card_name = "HD-Audio Generic at 0xf1560000 irq 85"
( 0.046| 0.000) I: [pulseaudio] sink.c: alsa.driver_name = "snd_hda_intel"
( 0.046| 0.000) I: [pulseaudio] sink.c: device.bus_path = "pci-0000:00:01.1"
( 0.046| 0.000) I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:01.1/sound/card0"
( 0.046| 0.000) I: [pulseaudio] sink.c: device.bus = "pci"
( 0.046| 0.000) I: [pulseaudio] sink.c: device.vendor.id = "1002"
( 0.046| 0.000) I: [pulseaudio] sink.c: device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
( 0.046| 0.000) I: [pulseaudio] sink.c: device.product.id = "9840"
( 0.046| 0.000) I: [pulseaudio] sink.c: device.product.name = "Kabini HDMI/DP Audio"
( 0.046| 0.000) I: [pulseaudio] sink.c: device.form_factor = "internal"
( 0.046| 0.000) I: [pulseaudio] sink.c: device.string = "hdmi:0"
( 0.046| 0.000) I: [pulseaudio] sink.c: device.buffering.buffer_size = "17664"
( 0.046| 0.000) I: [pulseaudio] sink.c: device.buffering.fragment_size = "2944"
( 0.046| 0.000) I: [pulseaudio] sink.c: device.access_mode = "mmap"
( 0.046| 0.000) I: [pulseaudio] sink.c: device.profile.name = "hdmi-stereo"
( 0.046| 0.000) I: [pulseaudio] sink.c: device.profile.description = "Digital Stereo (HDMI)"
( 0.046| 0.000) I: [pulseaudio] sink.c: device.description = "Built-in Audio Digital Stereo (HDMI)"
( 0.046| 0.000) I: [pulseaudio] sink.c: alsa.mixer_name = "ATI R6xx HDMI"
( 0.046| 0.000) I: [pulseaudio] sink.c: alsa.components = "HDA:1002aa01,00aa0100,00100500"
( 0.046| 0.000) I: [pulseaudio] sink.c: module-udev-detect.discovered = "1"
( 0.046| 0.000) I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
( 0.047| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 0.047| 0.000) I: [pulseaudio] source.c: Created source 0 "alsa_output.pci-0000_00_01.1.hdmi-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
( 0.047| 0.000) I: [pulseaudio] source.c: device.description = "Monitor of Built-in Audio Digital Stereo (HDMI)"
( 0.047| 0.000) I: [pulseaudio] source.c: device.class = "monitor"
( 0.047| 0.000) I: [pulseaudio] source.c: alsa.card = "0"
( 0.047| 0.000) I: [pulseaudio] source.c: alsa.card_name = "HD-Audio Generic"
( 0.047| 0.000) I: [pulseaudio] source.c: alsa.long_card_name = "HD-Audio Generic at 0xf1560000 irq 85"
( 0.047| 0.000) I: [pulseaudio] source.c: alsa.driver_name = "snd_hda_intel"
( 0.047| 0.000) I: [pulseaudio] source.c: device.bus_path = "pci-0000:00:01.1"
( 0.047| 0.000) I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:01.1/sound/card0"
( 0.047| 0.000) I: [pulseaudio] source.c: device.bus = "pci"
( 0.047| 0.000) I: [pulseaudio] source.c: device.vendor.id = "1002"
( 0.047| 0.000) I: [pulseaudio] source.c: device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
( 0.047| 0.000) I: [pulseaudio] source.c: device.product.id = "9840"
( 0.047| 0.000) I: [pulseaudio] source.c: device.product.name = "Kabini HDMI/DP Audio"
( 0.047| 0.000) I: [pulseaudio] source.c: device.form_factor = "internal"
( 0.047| 0.000) I: [pulseaudio] source.c: device.string = "0"
( 0.047| 0.000) I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
( 0.047| 0.000) I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
( 0.047| 0.000) I: [pulseaudio] alsa-sink.c: Using 6.0 fragments of size 2944 bytes (16.69ms), buffer size is 17664 bytes (100.14ms)
( 0.047| 0.000) D: [pulseaudio] alsa-sink.c: hwbuf_unused=0
( 0.047| 0.000) D: [pulseaudio] alsa-sink.c: setting avail_min=1
( 0.047| 0.000) D: [pulseaudio] alsa-mixer.c: Activating path hdmi-output-0
( 0.047| 0.000) D: [pulseaudio] alsa-mixer.c: Path hdmi-output-0 (HDMI / DisplayPort), direction=1, priority=59, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf
( 0.047| 0.000) D: [pulseaudio] alsa-mixer.c: Jack HDMI/DP,pcm=3, alsa_name='HDMI/DP,pcm=3 Jack', detection possible
( 0.047| 0.000) I: [pulseaudio] alsa-sink.c: Driver does not support hardware volume control, falling back to software volume control.
( 0.047| 0.000) I: [pulseaudio] alsa-sink.c: Driver does not support hardware mute control, falling back to software mute control.
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_dump():
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: Hooks PCM
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: Its setup is:
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: stream : PLAYBACK
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: access : MMAP_INTERLEAVED
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: format : S16_LE
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: subformat : STD
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: channels : 2
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: rate : 44100
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: exact rate : 44100 (44100/1)
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: msbits : 16
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: buffer_size : 4416
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: period_size : 736
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: period_time : 16689
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: tstamp_mode : ENABLE
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: period_step : 1
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: avail_min : 736
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: period_event : 1
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: start_threshold : -1
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: stop_threshold : 4971973988617027584
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: silence_threshold: 0
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: silence_size : 0
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: boundary : 4971973988617027584
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: Slave: Hardware PCM card 0 'HD-Audio Generic' device 3 subdevice 0
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: Its setup is:
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: stream : PLAYBACK
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: access : MMAP_INTERLEAVED
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: format : S16_LE
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: subformat : STD
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: channels : 2
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: rate : 44100
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: exact rate : 44100 (44100/1)
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: msbits : 16
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: buffer_size : 4416
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: period_size : 736
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: period_time : 16689
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: tstamp_mode : ENABLE
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: period_step : 1
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: avail_min : 736
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: period_event : 1
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: start_threshold : -1
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: stop_threshold : 4971973988617027584
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: silence_threshold: 0
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: silence_size : 0
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: boundary : 4971973988617027584
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: appl_ptr : 0
( 0.047| 0.000) D: [pulseaudio] alsa-util.c: hw_ptr : 0
( 0.048| 0.000) D: [alsa-sink-HDMI 0] alsa-sink.c: Thread starting up
( 0.051| 0.002) I: [alsa-sink-HDMI 0] core-util.c: Clamping rlimit-rttime to 200000 for RealtimeKit
( 0.056| 0.005) D: [alsa-sink-HDMI 0] core-util.c: RealtimeKit worked.
( 0.056| 0.000) I: [alsa-sink-HDMI 0] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
( 0.056| 0.000) I: [alsa-sink-HDMI 0] alsa-sink.c: Starting playback.
( 0.056| 0.000) D: [pulseaudio] alsa-util.c: ELD info empty (for device=3)
( 0.056| 0.000) I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #6; argument: "device_id="0" name="pci-0000_00_01.1" card_name="alsa_card.pci-0000_00_01.1" namereg_fail=false tsched=no fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
( 0.056| 0.000) I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:01.1/sound/card0 (alsa_card.pci-0000_00_01.1) module loaded.
( 0.056| 0.000) D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC1 is accessible: yes
( 0.057| 0.000) D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:14.2/sound/card1 is busy: no
( 0.057| 0.000) D: [pulseaudio] module-udev-detect.c: Loading module-alsa-card with arguments 'device_id="1" name="pci-0000_00_14.2" card_name="alsa_card.pci-0000_00_14.2" namereg_fail=false tsched=no fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"'
( 0.058| 0.000) D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio1'
( 0.058| 0.000) I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HD-Audio Generic/HD-Audio Generic.conf
( 0.058| 0.000) I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HD-Audio Generic
( 0.058| 0.000) I: [pulseaudio] (alsa-lib)main.c: error: failed to import HD-Audio Generic use case configuration -2
( 0.058| 0.000) I: [pulseaudio] alsa-ucm.c: UCM not available for card HD-Audio Generic
( 0.060| 0.001) D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-mono
( 0.060| 0.000) D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
( 0.060| 0.000) D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
( 0.060| 0.000) D: [pulseaudio] alsa-util.c: Managed to open hw:1
( 0.060| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
( 0.061| 0.000) D: [pulseaudio] alsa-util.c: Trying hw:1 without SND_PCM_NO_AUTO_FORMAT ...
( 0.061| 0.000) D: [pulseaudio] alsa-util.c: Managed to open hw:1
( 0.061| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
( 0.061| 0.000) D: [pulseaudio] alsa-util.c: Trying plug:hw:1 with SND_PCM_NO_AUTO_FORMAT ...
( 0.061| 0.000) D: [pulseaudio] alsa-util.c: Managed to open plug:hw:1
( 0.062| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
( 0.062| 0.000) D: [pulseaudio] alsa-util.c: Trying plug:hw:1 without SND_PCM_NO_AUTO_FORMAT ...
( 0.062| 0.000) D: [pulseaudio] alsa-util.c: Managed to open plug:hw:1
( 0.062| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
( 0.062| 0.000) I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:1: Invalid argument
( 0.062| 0.000) D: [pulseaudio] alsa-mixer.c: Caching failure to open input:analog-mono
( 0.062| 0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-stereo
( 0.062| 0.000) D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
( 0.063| 0.000) D: [pulseaudio] alsa-util.c: Trying front:1 with SND_PCM_NO_AUTO_FORMAT ...
( 0.063| 0.000) D: [pulseaudio] alsa-util.c: Managed to open front:1
( 0.063| 0.000) D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 371 ms
( 0.063| 0.000) D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
( 0.063| 0.000) D: [pulseaudio] alsa-mixer.c: Profile input:analog-stereo supported.
( 0.071| 0.007) I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:1
( 0.071| 0.000) I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:1: No such file or directory
( 0.071| 0.000) I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
( 0.071| 0.000) D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-front-mic'
( 0.071| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Jack' succeeded (not found)
( 0.071| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Phantom Jack' succeeded (not found)
( 0.071| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
( 0.071| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.071| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.071| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=0).
( 0.071| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-front-mic', none of required-any elements preset.
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-rear-mic'
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Jack' succeeded (not found)
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Phantom Jack' succeeded (not found)
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=0).
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.072| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-rear-mic', none of required-any elements preset.
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-internal-mic'
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Jack' succeeded (found!)
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Jack' succeeded (not found)
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Jack' succeeded (not found)
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Jack' succeeded (not found)
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Internal Mic Phantom Jack' succeeded (found!)
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=1, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Int Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Int Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-dock-mic'
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Jack' succeeded (not found)
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Phantom Jack' succeeded (not found)
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
( 0.073| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-dock-mic', none of required-any elements preset.
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input'
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Int Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Int Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' failed.
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-mic'
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Jack' succeeded (found!)
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Phantom Jack' succeeded (not found)
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=1, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Select' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost (+20dB)' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-linein'
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Jack' succeeded (not found)
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Phantom Jack' succeeded (not found)
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
( 0.074| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-linein', none of required-any elements preset.
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-aux'
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' failed.
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-video'
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' failed.
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-tvtuner'
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' failed.
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-fm'
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' failed.
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-mic-line'
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' failed.
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-headphone-mic'
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Mic Jack' succeeded (not found)
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Auto-Mute Mode' succeeded (volume=0, switch=0, enumeration=1).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.075| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-headphone-mic', none of required-any elements preset.
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-headset-mic'
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headset Mic Jack' succeeded (not found)
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headset Mic Phantom Jack' succeeded (not found)
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Jack' succeeded (found!)
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Mic Jack' succeeded (not found)
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset' succeeded (volume=0, switch=0, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-headset-mic', none of required-any elements preset.
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Path Set 0x1cedb90, direction=2
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Path analog-input-internal-mic (Internal Microphone), direction=2, priority=89, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=80, min_dB=-74, max_dB=42
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Element Internal Mic Boost, direction=2, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Element Mic Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Jack Mic, alsa_name='Mic Jack', detection possible
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Jack Dock Mic, alsa_name='Dock Mic Jack', detection unavailable
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Jack Front Mic, alsa_name='Front Mic Jack', detection unavailable
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Jack Rear Mic, alsa_name='Rear Mic Jack', detection unavailable
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Jack Internal Mic Phantom, alsa_name='Internal Mic Phantom Jack', detection possible
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Path analog-input-mic (Microphone), direction=2, priority=87, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=80, min_dB=-74, max_dB=42
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Element Mic Boost, direction=2, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Element Internal Mic Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
( 0.076| 0.000) D: [pulseaudio] alsa-mixer.c: Jack Mic, alsa_name='Mic Jack', detection possible
( 0.077| 0.000) D: [pulseaudio] alsa-mixer.c: Jack Mic Phantom, alsa_name='Mic Phantom Jack', detection unavailable
( 0.077| 0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-4-channel-input
( 0.077| 0.000) D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog 4-channel Input (analog-4-channel-input)
( 0.077| 0.000) D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
( 0.077| 0.000) D: [pulseaudio] alsa-util.c: Managed to open hw:1
( 0.077| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
( 0.077| 0.000) D: [pulseaudio] alsa-util.c: Trying hw:1 without SND_PCM_NO_AUTO_FORMAT ...
( 0.077| 0.000) D: [pulseaudio] alsa-util.c: Managed to open hw:1
( 0.077| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
( 0.077| 0.000) D: [pulseaudio] alsa-util.c: Trying plug:hw:1 with SND_PCM_NO_AUTO_FORMAT ...
( 0.077| 0.000) D: [pulseaudio] alsa-util.c: Managed to open plug:hw:1
( 0.077| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
( 0.077| 0.000) D: [pulseaudio] alsa-util.c: Trying plug:hw:1 without SND_PCM_NO_AUTO_FORMAT ...
( 0.078| 0.000) D: [pulseaudio] alsa-util.c: Managed to open plug:hw:1
( 0.078| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
( 0.078| 0.000) I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:1: Invalid argument
( 0.078| 0.000) D: [pulseaudio] alsa-mixer.c: Caching failure to open input:analog-4-channel-input
( 0.078| 0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile input:iec958-stereo
( 0.078| 0.000) D: [pulseaudio] alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
( 0.078| 0.000) D: [pulseaudio] alsa-util.c: Trying iec958:1 with SND_PCM_NO_AUTO_FORMAT ...
( 0.078| 0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D1c' failed (-2)
( 0.078| 0.000) I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
( 0.078| 0.000) D: [pulseaudio] alsa-mixer.c: Caching failure to open input:iec958-stereo
( 0.078| 0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-mono
( 0.078| 0.000) D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
( 0.078| 0.000) D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
( 0.078| 0.000) D: [pulseaudio] alsa-util.c: Managed to open hw:1
( 0.079| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
( 0.079| 0.000) D: [pulseaudio] alsa-util.c: Trying hw:1 without SND_PCM_NO_AUTO_FORMAT ...
( 0.079| 0.000) D: [pulseaudio] alsa-util.c: Managed to open hw:1
( 0.079| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
( 0.079| 0.000) D: [pulseaudio] alsa-util.c: Trying plug:hw:1 with SND_PCM_NO_AUTO_FORMAT ...
( 0.079| 0.000) D: [pulseaudio] alsa-util.c: Managed to open plug:hw:1
( 0.079| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
( 0.079| 0.000) D: [pulseaudio] alsa-util.c: Trying plug:hw:1 without SND_PCM_NO_AUTO_FORMAT ...
( 0.079| 0.000) D: [pulseaudio] alsa-util.c: Managed to open plug:hw:1
( 0.079| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
( 0.079| 0.000) I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:1: Invalid argument
( 0.079| 0.000) D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-mono
( 0.079| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:analog-mono - will not be able to open output:analog-mono
( 0.079| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:analog-stereo - will not be able to open output:analog-mono
( 0.079| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:analog-4-channel-input - will not be able to open output:analog-mono
( 0.079| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:iec958-stereo - will not be able to open output:analog-mono
( 0.079| 0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-stereo
( 0.080| 0.000) D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Stereo (analog-stereo)
( 0.080| 0.000) D: [pulseaudio] alsa-util.c: Trying front:1 with SND_PCM_NO_AUTO_FORMAT ...
( 0.080| 0.000) D: [pulseaudio] alsa-util.c: Managed to open front:1
( 0.080| 0.000) D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 371 ms
( 0.080| 0.000) D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
( 0.080| 0.000) D: [pulseaudio] alsa-mixer.c: Profile output:analog-stereo supported.
( 0.082| 0.001) I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:1
( 0.082| 0.000) I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:1: No such file or directory
( 0.082| 0.000) I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
( 0.082| 0.000) D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output'
( 0.082| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Jack' succeeded (not found)
( 0.082| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Phantom Jack' succeeded (not found)
( 0.082| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
( 0.082| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
( 0.082| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
( 0.082| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Line HP Swap' succeeded (volume=0, switch=0, enumeration=0).
( 0.082| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded (volume=3, switch=1, enumeration=0).
( 0.082| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' succeeded (volume=0, switch=0, enumeration=0).
( 0.082| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker' succeeded (volume=2, switch=1, enumeration=0).
( 0.082| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Desktop Speaker' succeeded (volume=0, switch=0, enumeration=0).
( 0.082| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Front' succeeded (volume=0, switch=0, enumeration=0).
( 0.082| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear' succeeded (volume=0, switch=0, enumeration=0).
( 0.082| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Surround' succeeded (volume=0, switch=0, enumeration=0).
( 0.082| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Side' succeeded (volume=0, switch=0, enumeration=0).
( 0.082| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Center' succeeded (volume=0, switch=0, enumeration=0).
( 0.082| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'LFE' succeeded (volume=0, switch=0, enumeration=0).
( 0.082| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'CLFE' succeeded (volume=0, switch=0, enumeration=0).
( 0.082| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'PCM' succeeded (volume=1, switch=0, enumeration=0).
( 0.082| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'External Amplifier' succeeded (volume=0, switch=0, enumeration=0).
( 0.082| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.082| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958' succeeded (volume=0, switch=0, enumeration=0).
( 0.082| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958 Optical Raw' succeeded (volume=0, switch=0, enumeration=0).
( 0.082| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Analog Output' succeeded (volume=0, switch=0, enumeration=0).
( 0.082| 0.000) D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output-lineout'
( 0.082| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Jack' succeeded (not found)
( 0.082| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Phantom Jack' succeeded (not found)
( 0.082| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Front Jack' succeeded (not found)
( 0.082| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Front Phantom Jack' succeeded (not found)
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out CLFE Jack' succeeded (not found)
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out CLFE Phantom Jack' succeeded (not found)
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Surround Jack' succeeded (not found)
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Surround Phantom Jack' succeeded (not found)
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Side Jack' succeeded (not found)
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Side Phantom Jack' succeeded (not found)
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Line HP Swap' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded (volume=3, switch=1, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker' succeeded (volume=2, switch=1, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Desktop Speaker' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Front' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Surround' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Side' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Center' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'LFE' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'CLFE' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Speaker' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Front' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Surround' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Side' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker CLFE' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'PCM' succeeded (volume=1, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'External Amplifier' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958 Optical Raw' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Analog Output' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-output-lineout', none of required-any elements preset.
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output-speaker'
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Jack' succeeded (found!)
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Headphone Jack' succeeded (not found)
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Speaker Phantom Jack' succeeded (found!)
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Speaker Front Phantom Jack' succeeded (not found)
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded (volume=2, switch=2, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker' succeeded (volume=1, switch=1, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Desktop Speaker' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Front' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Speaker' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Front' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Surround' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Surround Speaker' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Surround' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Side' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Side' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Center' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Center Speaker' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'LFE' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'LFE Speaker' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Speaker' succeeded (volume=0, switch=0, enumeration=0).
( 0.083| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'CLFE' succeeded (volume=0, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker CLFE' succeeded (volume=0, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'PCM' succeeded (volume=1, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'External Amplifier' succeeded (volume=0, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958' succeeded (volume=0, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958 Optical Raw' succeeded (volume=0, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Analog Output' succeeded (volume=0, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output-desktop-speaker'
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded (volume=3, switch=1, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' succeeded (volume=0, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker' succeeded (volume=2, switch=2, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Desktop Speaker' failed.
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output-headphones'
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Headphone Jack' succeeded (not found)
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Headphone Phantom Jack' succeeded (not found)
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Jack' succeeded (found!)
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Phantom Jack' succeeded (not found)
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Mic Jack' succeeded (not found)
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded (volume=1, switch=1, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset' succeeded (volume=0, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Line HP Swap' succeeded (volume=0, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' succeeded (volume=0, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker' succeeded (volume=2, switch=2, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Desktop Speaker' succeeded (volume=0, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Front' succeeded (volume=0, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear' succeeded (volume=0, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Surround' succeeded (volume=0, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Side' succeeded (volume=0, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Center' succeeded (volume=0, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'LFE' succeeded (volume=0, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Speaker' succeeded (volume=0, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Front' succeeded (volume=0, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Surround' succeeded (volume=0, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Side' succeeded (volume=0, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker CLFE' succeeded (volume=0, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'PCM' succeeded (volume=1, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'External Amplifier' succeeded (volume=0, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Boost' succeeded (volume=0, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958' succeeded (volume=0, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958 Optical Raw' succeeded (volume=0, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Analog Output' succeeded (volume=0, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output-headphones-2'
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded (volume=3, switch=1, enumeration=0).
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' failed.
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Path Set 0x1d654e0, direction=1
( 0.084| 0.000) D: [pulseaudio] alsa-mixer.c: Path analog-output (Analog Output), direction=1, priority=99, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=74, min_dB=-125, max_dB=0
( 0.085| 0.000) D: [pulseaudio] alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=yes
( 0.085| 0.000) D: [pulseaudio] alsa-mixer.c: Element Headphone, direction=1, switch=1, volume=3, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
( 0.085| 0.000) D: [pulseaudio] alsa-mixer.c: Element Speaker, direction=1, switch=1, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
( 0.085| 0.000) D: [pulseaudio] alsa-mixer.c: Element PCM, direction=1, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
( 0.085| 0.000) D: [pulseaudio] alsa-mixer.c: Jack Line Out, alsa_name='Line Out Jack', detection unavailable
( 0.085| 0.000) D: [pulseaudio] alsa-mixer.c: Jack Line Out Phantom, alsa_name='Line Out Phantom Jack', detection unavailable
( 0.085| 0.000) D: [pulseaudio] alsa-mixer.c: Path analog-output-speaker (Speakers), direction=1, priority=100, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=74, min_dB=-199, max_dB=0
( 0.085| 0.000) D: [pulseaudio] alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=yes
( 0.085| 0.000) D: [pulseaudio] alsa-mixer.c: Element Headphone, direction=1, switch=2, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
( 0.085| 0.000) D: [pulseaudio] alsa-mixer.c: Element Speaker, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
( 0.085| 0.000) D: [pulseaudio] alsa-mixer.c: Element PCM, direction=1, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
( 0.085| 0.000) D: [pulseaudio] alsa-mixer.c: Jack Headphone, alsa_name='Headphone Jack', detection possible
( 0.085| 0.000) D: [pulseaudio] alsa-mixer.c: Jack Front Headphone, alsa_name='Front Headphone Jack', detection unavailable
( 0.085| 0.000) D: [pulseaudio] alsa-mixer.c: Jack Speaker Phantom, alsa_name='Speaker Phantom Jack', detection possible
( 0.085| 0.000) D: [pulseaudio] alsa-mixer.c: Jack Speaker Front Phantom, alsa_name='Speaker Front Phantom Jack', detection unavailable
( 0.085| 0.000) D: [pulseaudio] alsa-mixer.c: Path analog-output-headphones (Headphones), direction=1, priority=90, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=74, min_dB=-199, max_dB=0
( 0.085| 0.000) D: [pulseaudio] alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=yes
( 0.085| 0.000) D: [pulseaudio] alsa-mixer.c: Element Headphone, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
( 0.085| 0.000) D: [pulseaudio] alsa-mixer.c: Element Speaker, direction=1, switch=2, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
( 0.085| 0.000) D: [pulseaudio] alsa-mixer.c: Element PCM, direction=1, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
( 0.085| 0.000) D: [pulseaudio] alsa-mixer.c: Jack Front Headphone, alsa_name='Front Headphone Jack', detection unavailable
( 0.085| 0.000) D: [pulseaudio] alsa-mixer.c: Jack Front Headphone Phantom, alsa_name='Front Headphone Phantom Jack', detection unavailable
( 0.085| 0.000) D: [pulseaudio] alsa-mixer.c: Jack Headphone, alsa_name='Headphone Jack', detection possible
( 0.085| 0.000) D: [pulseaudio] alsa-mixer.c: Jack Headphone Phantom, alsa_name='Headphone Phantom Jack', detection unavailable
( 0.085| 0.000) D: [pulseaudio] alsa-mixer.c: Jack Headphone Mic, alsa_name='Headphone Mic Jack', detection unavailable
( 0.085| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:analog-mono - will not be able to open input:analog-mono
( 0.085| 0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-stereo+input:analog-stereo
( 0.085| 0.000) D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
( 0.085| 0.000) D: [pulseaudio] alsa-util.c: Trying front:1 with SND_PCM_NO_AUTO_FORMAT ...
( 0.085| 0.000) D: [pulseaudio] alsa-util.c: Managed to open front:1
( 0.085| 0.000) D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 371 ms
( 0.085| 0.000) D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
( 0.086| 0.000) D: [pulseaudio] alsa-mixer.c: Profile output:analog-stereo+input:analog-stereo supported.
( 0.086| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:analog-4-channel-input - will not be able to open input:analog-4-channel-input
( 0.086| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:iec958-stereo - will not be able to open input:iec958-stereo
( 0.086| 0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-40
( 0.086| 0.000) D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.0 (analog-surround-40)
( 0.086| 0.000) D: [pulseaudio] alsa-util.c: Trying surround40:1 with SND_PCM_NO_AUTO_FORMAT ...
( 0.086| 0.000) D: [pulseaudio] alsa-util.c: Managed to open surround40:1
( 0.086| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
( 0.086| 0.000) D: [pulseaudio] alsa-util.c: Trying surround40:1 without SND_PCM_NO_AUTO_FORMAT ...
( 0.086| 0.000) D: [pulseaudio] alsa-util.c: Managed to open surround40:1
( 0.087| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
( 0.087| 0.000) D: [pulseaudio] alsa-util.c: Trying plug:surround40:1 with SND_PCM_NO_AUTO_FORMAT ...
( 0.087| 0.000) D: [pulseaudio] alsa-util.c: Managed to open plug:surround40:1
( 0.087| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
( 0.087| 0.000) D: [pulseaudio] alsa-util.c: Trying plug:surround40:1 without SND_PCM_NO_AUTO_FORMAT ...
( 0.087| 0.000) D: [pulseaudio] alsa-util.c: Managed to open plug:surround40:1
( 0.088| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
( 0.088| 0.000) I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround40:1: Invalid argument
( 0.088| 0.000) D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-40
( 0.088| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:analog-mono - will not be able to open output:analog-surround-40
( 0.088| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:analog-stereo - will not be able to open output:analog-surround-40
( 0.088| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:analog-4-channel-input - will not be able to open output:analog-surround-40
( 0.088| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:iec958-stereo - will not be able to open output:analog-surround-40
( 0.088| 0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-41
( 0.088| 0.000) D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.1 (analog-surround-41)
( 0.088| 0.000) D: [pulseaudio] alsa-util.c: Trying surround41:1 with SND_PCM_NO_AUTO_FORMAT ...
( 0.088| 0.000) D: [pulseaudio] alsa-util.c: Managed to open surround41:1
( 0.088| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
( 0.088| 0.000) D: [pulseaudio] alsa-util.c: Trying surround41:1 without SND_PCM_NO_AUTO_FORMAT ...
( 0.089| 0.000) D: [pulseaudio] alsa-util.c: Managed to open surround41:1
( 0.089| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
( 0.089| 0.000) D: [pulseaudio] alsa-util.c: Trying plug:surround41:1 with SND_PCM_NO_AUTO_FORMAT ...
( 0.089| 0.000) D: [pulseaudio] alsa-util.c: Managed to open plug:surround41:1
( 0.089| 0.000) I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
( 0.089| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
( 0.089| 0.000) D: [pulseaudio] alsa-util.c: Trying plug:surround41:1 without SND_PCM_NO_AUTO_FORMAT ...
( 0.090| 0.000) D: [pulseaudio] alsa-util.c: Managed to open plug:surround41:1
( 0.090| 0.000) I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
( 0.090| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
( 0.090| 0.000) I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround41:1: Invalid argument
( 0.090| 0.000) D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-41
( 0.090| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:analog-mono - will not be able to open output:analog-surround-41
( 0.090| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:analog-stereo - will not be able to open output:analog-surround-41
( 0.090| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:analog-4-channel-input - will not be able to open output:analog-surround-41
( 0.090| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:iec958-stereo - will not be able to open output:analog-surround-41
( 0.090| 0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-50
( 0.090| 0.000) D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.0 (analog-surround-50)
( 0.090| 0.000) D: [pulseaudio] alsa-util.c: Trying surround50:1 with SND_PCM_NO_AUTO_FORMAT ...
( 0.090| 0.000) D: [pulseaudio] alsa-util.c: Managed to open surround50:1
( 0.090| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
( 0.090| 0.000) D: [pulseaudio] alsa-util.c: Trying surround50:1 without SND_PCM_NO_AUTO_FORMAT ...
( 0.090| 0.000) D: [pulseaudio] alsa-util.c: Managed to open surround50:1
( 0.091| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
( 0.091| 0.000) D: [pulseaudio] alsa-util.c: Trying plug:surround50:1 with SND_PCM_NO_AUTO_FORMAT ...
( 0.091| 0.000) D: [pulseaudio] alsa-util.c: Managed to open plug:surround50:1
( 0.091| 0.000) I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
( 0.091| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
( 0.091| 0.000) D: [pulseaudio] alsa-util.c: Trying plug:surround50:1 without SND_PCM_NO_AUTO_FORMAT ...
( 0.091| 0.000) D: [pulseaudio] alsa-util.c: Managed to open plug:surround50:1
( 0.091| 0.000) I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
( 0.091| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
( 0.091| 0.000) I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround50:1: Invalid argument
( 0.091| 0.000) D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-50
( 0.091| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:analog-mono - will not be able to open output:analog-surround-50
( 0.091| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:analog-stereo - will not be able to open output:analog-surround-50
( 0.091| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:analog-4-channel-input - will not be able to open output:analog-surround-50
( 0.092| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:iec958-stereo - will not be able to open output:analog-surround-50
( 0.092| 0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-51
( 0.092| 0.000) D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.1 (analog-surround-51)
( 0.092| 0.000) D: [pulseaudio] alsa-util.c: Trying surround51:1 with SND_PCM_NO_AUTO_FORMAT ...
( 0.092| 0.000) D: [pulseaudio] alsa-util.c: Managed to open surround51:1
( 0.092| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Invalid argument
( 0.092| 0.000) D: [pulseaudio] alsa-util.c: Trying surround51:1 without SND_PCM_NO_AUTO_FORMAT ...
( 0.092| 0.000) D: [pulseaudio] alsa-util.c: Managed to open surround51:1
( 0.092| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Invalid argument
( 0.092| 0.000) D: [pulseaudio] alsa-util.c: Trying plug:surround51:1 with SND_PCM_NO_AUTO_FORMAT ...
( 0.093| 0.000) D: [pulseaudio] alsa-util.c: Managed to open plug:surround51:1
( 0.093| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Invalid argument
( 0.093| 0.000) D: [pulseaudio] alsa-util.c: Trying plug:surround51:1 without SND_PCM_NO_AUTO_FORMAT ...
( 0.093| 0.000) D: [pulseaudio] alsa-util.c: Managed to open plug:surround51:1
( 0.094| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Invalid argument
( 0.094| 0.000) I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround51:1: Invalid argument
( 0.094| 0.000) D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-51
( 0.094| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:analog-mono - will not be able to open output:analog-surround-51
( 0.094| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:analog-stereo - will not be able to open output:analog-surround-51
( 0.094| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:analog-4-channel-input - will not be able to open output:analog-surround-51
( 0.094| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:iec958-stereo - will not be able to open output:analog-surround-51
( 0.094| 0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-71
( 0.094| 0.000) D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 7.1 (analog-surround-71)
( 0.094| 0.000) D: [pulseaudio] alsa-util.c: Trying surround71:1 with SND_PCM_NO_AUTO_FORMAT ...
( 0.094| 0.000) D: [pulseaudio] alsa-util.c: Managed to open surround71:1
( 0.094| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(8) failed: Invalid argument
( 0.094| 0.000) D: [pulseaudio] alsa-util.c: Trying surround71:1 without SND_PCM_NO_AUTO_FORMAT ...
( 0.095| 0.000) D: [pulseaudio] alsa-util.c: Managed to open surround71:1
( 0.095| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(8) failed: Invalid argument
( 0.095| 0.000) D: [pulseaudio] alsa-util.c: Trying plug:surround71:1 with SND_PCM_NO_AUTO_FORMAT ...
( 0.095| 0.000) D: [pulseaudio] alsa-util.c: Managed to open plug:surround71:1
( 0.095| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(8) failed: Invalid argument
( 0.095| 0.000) D: [pulseaudio] alsa-util.c: Trying plug:surround71:1 without SND_PCM_NO_AUTO_FORMAT ...
( 0.096| 0.000) D: [pulseaudio] alsa-util.c: Managed to open plug:surround71:1
( 0.096| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(8) failed: Invalid argument
( 0.096| 0.000) I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround71:1: Invalid argument
( 0.096| 0.000) D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-71
( 0.096| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:analog-mono - will not be able to open output:analog-surround-71
( 0.096| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:analog-stereo - will not be able to open output:analog-surround-71
( 0.096| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:analog-4-channel-input - will not be able to open output:analog-surround-71
( 0.096| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:iec958-stereo - will not be able to open output:analog-surround-71
( 0.096| 0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-stereo
( 0.096| 0.000) D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (IEC958) (iec958-stereo)
( 0.096| 0.000) D: [pulseaudio] alsa-util.c: Trying iec958:1 with SND_PCM_NO_AUTO_FORMAT ...
( 0.097| 0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D1p' failed (-2)
( 0.097| 0.000) I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
( 0.097| 0.000) D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-stereo
( 0.097| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:analog-mono - will not be able to open output:iec958-stereo
( 0.097| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:analog-stereo - will not be able to open output:iec958-stereo
( 0.097| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:analog-4-channel-input - will not be able to open output:iec958-stereo
( 0.097| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:iec958-stereo - will not be able to open output:iec958-stereo
( 0.097| 0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-ac3-surround-40
( 0.097| 0.000) D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958/AC3) (iec958-ac3-surround-40)
( 0.097| 0.000) D: [pulseaudio] alsa-util.c: Trying a52:1 with SND_PCM_NO_AUTO_FORMAT ...
( 0.097| 0.000) I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
( 0.097| 0.000) I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
( 0.097| 0.000) D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-ac3-surround-40
( 0.097| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:analog-mono - will not be able to open output:iec958-ac3-surround-40
( 0.097| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:analog-stereo - will not be able to open output:iec958-ac3-surround-40
( 0.097| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:analog-4-channel-input - will not be able to open output:iec958-ac3-surround-40
( 0.097| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:iec958-stereo - will not be able to open output:iec958-ac3-surround-40
( 0.097| 0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-ac3-surround-51
( 0.097| 0.000) D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/AC3) (iec958-ac3-surround-51)
( 0.097| 0.000) D: [pulseaudio] alsa-util.c: Trying a52:1 with SND_PCM_NO_AUTO_FORMAT ...
( 0.097| 0.000) I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
( 0.097| 0.000) I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
( 0.097| 0.000) D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-ac3-surround-51
( 0.097| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:analog-mono - will not be able to open output:iec958-ac3-surround-51
( 0.097| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:analog-stereo - will not be able to open output:iec958-ac3-surround-51
( 0.097| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:analog-4-channel-input - will not be able to open output:iec958-ac3-surround-51
( 0.097| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:iec958-stereo - will not be able to open output:iec958-ac3-surround-51
( 0.097| 0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-dts-surround-51
( 0.097| 0.000) D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/DTS) (iec958-dts-surround-51)
( 0.097| 0.000) D: [pulseaudio] alsa-util.c: Trying dca:1 with SND_PCM_NO_AUTO_FORMAT ...
( 0.097| 0.000) I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:1
( 0.097| 0.000) I: [pulseaudio] alsa-util.c: Error opening PCM device dca:1: No such file or directory
( 0.097| 0.000) D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-dts-surround-51
( 0.097| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:analog-mono - will not be able to open output:iec958-dts-surround-51
( 0.097| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:analog-stereo - will not be able to open output:iec958-dts-surround-51
( 0.097| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:analog-4-channel-input - will not be able to open output:iec958-dts-surround-51
( 0.097| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:iec958-stereo - will not be able to open output:iec958-dts-surround-51
( 0.097| 0.000) D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-stereo
( 0.097| 0.000) D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (HDMI) (hdmi-stereo)
( 0.097| 0.000) D: [pulseaudio] alsa-util.c: Trying hdmi:1 with SND_PCM_NO_AUTO_FORMAT ...
( 0.098| 0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D3p' failed (-2)
( 0.098| 0.000) I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1: No such file or directory
( 0.098| 0.000) D: [pulseaudio] alsa-mixer.c: Caching failure to open output:hdmi-stereo
( 0.098| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:analog-mono - will not be able to open output:hdmi-stereo
( 0.098| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:analog-stereo - will not be able to open output:hdmi-stereo
( 0.098| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:analog-4-channel-input - will not be able to open output:hdmi-stereo
( 0.098| 0.000) D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:iec958-stereo - will not be able to open output:hdmi-stereo
( 0.098| 0.000) D: [pulseaudio] alsa-mixer.c: Profile set 0x1cde7c0, auto_profiles=yes, probed=yes, n_mappings=1, n_profiles=3, n_decibel_fixes=0
( 0.098| 0.000) D: [pulseaudio] alsa-mixer.c: Mapping analog-stereo (Analog Stereo), priority=60, channel_map=front-left,front-right, supported=yes, direction=0
( 0.098| 0.000) D: [pulseaudio] alsa-mixer.c: Profile input:analog-stereo (Analog Stereo Input), priority=60, supported=yes n_input_mappings=1, n_output_mappings=0
( 0.098| 0.000) D: [pulseaudio] alsa-mixer.c: Input analog-stereo
( 0.098| 0.000) D: [pulseaudio] alsa-mixer.c: Profile output:analog-stereo (Analog Stereo Output), priority=6000, supported=yes n_input_mappings=0, n_output_mappings=1
( 0.098| 0.000) D: [pulseaudio] alsa-mixer.c: Output analog-stereo
( 0.098| 0.000) D: [pulseaudio] alsa-mixer.c: Profile output:analog-stereo+input:analog-stereo (Analog Stereo Duplex), priority=6060, supported=yes n_input_mappings=1, n_output_mappings=1
( 0.098| 0.000) D: [pulseaudio] alsa-mixer.c: Input analog-stereo
( 0.098| 0.000) D: [pulseaudio] alsa-mixer.c: Output analog-stereo
( 0.099| 0.000) I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_00_14.2.
( 0.099| 0.000) I: [pulseaudio] card.c: Created 1 "alsa_card.pci-0000_00_14.2"
( 0.099| 0.000) D: [pulseaudio] module-alsa-card.c: Found 6 jacks.
( 0.099| 0.000) I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
( 0.099| 0.000) D: [pulseaudio] module-alsa-card.c: Jack 'Headphone Jack' is now plugged in
( 0.099| 0.000) D: [pulseaudio] device-port.c: Setting port analog-output-speaker to status no
( 0.099| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 0.099| 0.000) D: [pulseaudio] module-switch-on-port-available.c: finding port analog-output-speaker
( 0.099| 0.000) D: [pulseaudio] module-alsa-card.c: Jack 'Speaker Phantom Jack' is now plugged in
( 0.099| 0.000) D: [pulseaudio] module-alsa-card.c: Jack 'Headphone Jack' is now plugged in
( 0.099| 0.000) D: [pulseaudio] device-port.c: Setting port analog-output-headphones to status yes
( 0.099| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 0.099| 0.000) D: [pulseaudio] module-switch-on-port-available.c: finding port analog-output-headphones
( 0.099| 0.000) D: [pulseaudio] module-alsa-card.c: Jack 'Mic Jack' is now unplugged
( 0.099| 0.000) D: [pulseaudio] module-alsa-card.c: Jack 'Internal Mic Phantom Jack' is now plugged in
( 0.099| 0.000) D: [pulseaudio] module-alsa-card.c: Jack 'Mic Jack' is now unplugged
( 0.099| 0.000) D: [pulseaudio] device-port.c: Setting port analog-input-mic to status no
( 0.099| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 0.099| 0.000) D: [pulseaudio] module-switch-on-port-available.c: finding port analog-input-mic
( 0.100| 0.000) D: [pulseaudio] reserve-wrap.c: Successfully create reservation lock monitor for device 'Audio1'
( 0.100| 0.000) D: [pulseaudio] alsa-util.c: Trying front:1 with SND_PCM_NO_AUTO_FORMAT ...
( 0.100| 0.000) D: [pulseaudio] alsa-util.c: Managed to open front:1
( 0.101| 0.000) D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 371 ms
( 0.101| 0.000) D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
( 0.101| 0.000) I: [pulseaudio] alsa-sink.c: Successfully opened device front:1.
( 0.101| 0.000) I: [pulseaudio] alsa-sink.c: Selected mapping 'Analog Stereo' (analog-stereo).
( 0.101| 0.000) I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
( 0.101| 0.000) I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:1
( 0.101| 0.000) I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:1: No such file or directory
( 0.101| 0.000) I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
( 0.101| 0.000) D: [pulseaudio] alsa-mixer.c: Added 3 ports
( 0.101| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 0.101| 0.000) I: [pulseaudio] module-device-restore.c: Restoring port for sink sink:alsa_output.pci-0000_00_14.2.analog-stereo.
( 0.102| 0.000) I: [pulseaudio] module-device-restore.c: Restoring volume for sink alsa_output.pci-0000_00_14.2.analog-stereo: front-left: 14920 / 23%, front-right: 14920 / 23%
( 0.102| 0.000) I: [pulseaudio] module-device-restore.c: Restoring mute state for sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 0.102| 0.000) I: [pulseaudio] sink.c: Created sink 1 "alsa_output.pci-0000_00_14.2.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
( 0.102| 0.000) I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
( 0.102| 0.000) I: [pulseaudio] sink.c: device.api = "alsa"
( 0.102| 0.000) I: [pulseaudio] sink.c: device.class = "sound"
( 0.102| 0.000) I: [pulseaudio] sink.c: alsa.class = "generic"
( 0.102| 0.000) I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
( 0.102| 0.000) I: [pulseaudio] sink.c: alsa.name = "CX20756 Analog"
( 0.102| 0.000) I: [pulseaudio] sink.c: alsa.id = "CX20756 Analog"
( 0.102| 0.000) I: [pulseaudio] sink.c: alsa.subdevice = "0"
( 0.102| 0.000) I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
( 0.102| 0.000) I: [pulseaudio] sink.c: alsa.device = "0"
( 0.102| 0.000) I: [pulseaudio] sink.c: alsa.card = "1"
( 0.102| 0.000) I: [pulseaudio] sink.c: alsa.card_name = "HD-Audio Generic"
( 0.102| 0.000) I: [pulseaudio] sink.c: alsa.long_card_name = "HD-Audio Generic at 0xf1564000 irq 86"
( 0.102| 0.000) I: [pulseaudio] sink.c: alsa.driver_name = "snd_hda_intel"
( 0.102| 0.000) I: [pulseaudio] sink.c: device.bus_path = "pci-0000:00:14.2"
( 0.102| 0.000) I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card1"
( 0.102| 0.000) I: [pulseaudio] sink.c: device.bus = "pci"
( 0.102| 0.000) I: [pulseaudio] sink.c: device.vendor.id = "1022"
( 0.102| 0.000) I: [pulseaudio] sink.c: device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
( 0.102| 0.000) I: [pulseaudio] sink.c: device.product.id = "780d"
( 0.102| 0.000) I: [pulseaudio] sink.c: device.product.name = "FCH Azalia Controller"
( 0.102| 0.000) I: [pulseaudio] sink.c: device.form_factor = "internal"
( 0.102| 0.000) I: [pulseaudio] sink.c: device.string = "front:1"
( 0.102| 0.000) I: [pulseaudio] sink.c: device.buffering.buffer_size = "17664"
( 0.102| 0.000) I: [pulseaudio] sink.c: device.buffering.fragment_size = "2944"
( 0.102| 0.000) I: [pulseaudio] sink.c: device.access_mode = "mmap"
( 0.102| 0.000) I: [pulseaudio] sink.c: device.profile.name = "analog-stereo"
( 0.102| 0.000) I: [pulseaudio] sink.c: device.profile.description = "Analog Stereo"
( 0.102| 0.000) I: [pulseaudio] sink.c: device.description = "Built-in Audio Analog Stereo"
( 0.102| 0.000) I: [pulseaudio] sink.c: alsa.mixer_name = "Conexant CX20756"
( 0.102| 0.000) I: [pulseaudio] sink.c: alsa.components = "HDA:14f15114,1179f920,00100100"
( 0.102| 0.000) I: [pulseaudio] sink.c: module-udev-detect.discovered = "1"
( 0.102| 0.000) I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
( 0.102| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 0.102| 0.000) I: [pulseaudio] source.c: Created source 1 "alsa_output.pci-0000_00_14.2.analog-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
( 0.102| 0.000) I: [pulseaudio] source.c: device.description = "Monitor of Built-in Audio Analog Stereo"
( 0.102| 0.000) I: [pulseaudio] source.c: device.class = "monitor"
( 0.102| 0.000) I: [pulseaudio] source.c: alsa.card = "1"
( 0.102| 0.000) I: [pulseaudio] source.c: alsa.card_name = "HD-Audio Generic"
( 0.102| 0.000) I: [pulseaudio] source.c: alsa.long_card_name = "HD-Audio Generic at 0xf1564000 irq 86"
( 0.102| 0.000) I: [pulseaudio] source.c: alsa.driver_name = "snd_hda_intel"
( 0.102| 0.000) I: [pulseaudio] source.c: device.bus_path = "pci-0000:00:14.2"
( 0.102| 0.000) I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card1"
( 0.102| 0.000) I: [pulseaudio] source.c: device.bus = "pci"
( 0.102| 0.000) I: [pulseaudio] source.c: device.vendor.id = "1022"
( 0.102| 0.000) I: [pulseaudio] source.c: device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
( 0.102| 0.000) I: [pulseaudio] source.c: device.product.id = "780d"
( 0.102| 0.000) I: [pulseaudio] source.c: device.product.name = "FCH Azalia Controller"
( 0.102| 0.000) I: [pulseaudio] source.c: device.form_factor = "internal"
( 0.102| 0.000) I: [pulseaudio] source.c: device.string = "1"
( 0.102| 0.000) I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
( 0.102| 0.000) I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
( 0.102| 0.000) I: [pulseaudio] alsa-sink.c: Using 6.0 fragments of size 2944 bytes (16.69ms), buffer size is 17664 bytes (100.14ms)
( 0.102| 0.000) D: [pulseaudio] alsa-sink.c: hwbuf_unused=0
( 0.102| 0.000) D: [pulseaudio] alsa-sink.c: setting avail_min=1
( 0.102| 0.000) D: [pulseaudio] alsa-mixer.c: Activating path analog-output
( 0.102| 0.000) D: [pulseaudio] alsa-mixer.c: Path analog-output (Analog Output), direction=1, priority=99, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=74, min_dB=-125, max_dB=0
( 0.103| 0.000) D: [pulseaudio] alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=yes
( 0.103| 0.000) D: [pulseaudio] alsa-mixer.c: Element Headphone, direction=1, switch=1, volume=3, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
( 0.103| 0.000) D: [pulseaudio] alsa-mixer.c: Element Speaker, direction=1, switch=1, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
( 0.103| 0.000) D: [pulseaudio] alsa-mixer.c: Element PCM, direction=1, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
( 0.103| 0.000) D: [pulseaudio] alsa-mixer.c: Jack Line Out, alsa_name='Line Out Jack', detection unavailable
( 0.103| 0.000) D: [pulseaudio] alsa-mixer.c: Jack Line Out Phantom, alsa_name='Line Out Phantom Jack', detection unavailable
( 0.103| 0.000) I: [pulseaudio] alsa-sink.c: Successfully enabled deferred volume.
( 0.103| 0.000) I: [pulseaudio] alsa-sink.c: Hardware volume ranges from -125.00 dB to 0.00 dB.
( 0.103| 0.000) I: [pulseaudio] alsa-sink.c: Fixing base volume to 0.00 dB
( 0.103| 0.000) I: [pulseaudio] alsa-sink.c: Using hardware volume control. Hardware dB scale supported.
( 0.103| 0.000) I: [pulseaudio] alsa-sink.c: Using hardware mute control.
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_dump():
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: Soft volume PCM
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: Control: PCM Playback Volume
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: min_dB: -51
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: max_dB: 0
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: resolution: 256
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: Its setup is:
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: stream : PLAYBACK
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: access : MMAP_INTERLEAVED
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: format : S16_LE
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: subformat : STD
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: channels : 2
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: rate : 44100
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: exact rate : 44100 (44100/1)
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: msbits : 16
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: buffer_size : 4416
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: period_size : 736
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: period_time : 16689
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: tstamp_mode : ENABLE
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: period_step : 1
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: avail_min : 736
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: period_event : 1
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: start_threshold : -1
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: stop_threshold : 4971973988617027584
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: silence_threshold: 0
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: silence_size : 0
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: boundary : 4971973988617027584
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: Slave: Hardware PCM card 1 'HD-Audio Generic' device 0 subdevice 0
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: Its setup is:
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: stream : PLAYBACK
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: access : MMAP_INTERLEAVED
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: format : S16_LE
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: subformat : STD
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: channels : 2
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: rate : 44100
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: exact rate : 44100 (44100/1)
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: msbits : 16
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: buffer_size : 4416
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: period_size : 736
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: period_time : 16689
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: tstamp_mode : ENABLE
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: period_step : 1
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: avail_min : 736
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: period_event : 1
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: start_threshold : -1
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: stop_threshold : 4971973988617027584
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: silence_threshold: 0
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: silence_size : 0
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: boundary : 4971973988617027584
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: appl_ptr : 0
( 0.103| 0.000) D: [pulseaudio] alsa-util.c: hw_ptr : 0
( 0.103| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Thread starting up
( 0.103| 0.000) D: [pulseaudio] alsa-sink.c: Requested volume: front-left: 14920 / 23% / -38.56 dB, front-right: 14920 / 23% / -38.56 dB
( 0.103| 0.000) D: [pulseaudio] alsa-sink.c: Got hardware volume: front-left: 15014 / 23% / -38.40 dB, front-right: 15014 / 23% / -38.40 dB
( 0.104| 0.000) D: [pulseaudio] alsa-sink.c: Calculated software volume: front-left: 65126 / 99% / -0.16 dB, front-right: 65126 / 99% / -0.16 dB (accurate-enough=yes)
( 0.104| 0.000) D: [pulseaudio] alsa-sink.c: Written HW volume did not match with the request: front-left: 14920 / 23% / -38.56 dB, front-right: 14920 / 23% / -38.56 dB (request) != front-left: 14672 / 22% / -39.00 dB, front-right: 14672 / 22% / -39.00 dB
( 0.113| 0.009) D: [alsa-sink-CX20756 Analog] core-util.c: RealtimeKit worked.
( 0.113| 0.000) I: [alsa-sink-CX20756 Analog] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
( 0.114| 0.000) I: [alsa-sink-CX20756 Analog] alsa-sink.c: Starting playback.
( 0.114| 0.000) D: [pulseaudio] module-device-restore.c: Could not set format on sink alsa_output.pci-0000_00_14.2.analog-stereo
( 0.114| 0.000) D: [pulseaudio] alsa-util.c: Trying front:1 with SND_PCM_NO_AUTO_FORMAT ...
( 0.115| 0.000) D: [pulseaudio] alsa-util.c: Managed to open front:1
( 0.115| 0.000) D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 371 ms
( 0.115| 0.000) D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
( 0.115| 0.000) I: [pulseaudio] alsa-source.c: Successfully opened device front:1.
( 0.115| 0.000) I: [pulseaudio] alsa-source.c: Selected mapping 'Analog Stereo' (analog-stereo).
( 0.115| 0.000) I: [pulseaudio] alsa-source.c: Successfully enabled mmap() mode.
( 0.115| 0.000) I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:1
( 0.115| 0.000) I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:1: No such file or directory
( 0.116| 0.000) I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
( 0.116| 0.000) D: [pulseaudio] alsa-mixer.c: Added 2 ports
( 0.116| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 0.116| 0.000) I: [pulseaudio] module-device-restore.c: Restoring port for source source:alsa_input.pci-0000_00_14.2.analog-stereo.
( 0.116| 0.000) I: [pulseaudio] module-device-restore.c: Restoring volume for source alsa_input.pci-0000_00_14.2.analog-stereo: front-left: 44205 / 67%, front-right: 44205 / 67%
( 0.116| 0.000) I: [pulseaudio] module-device-restore.c: Restoring mute state for source alsa_input.pci-0000_00_14.2.analog-stereo.
( 0.117| 0.000) I: [pulseaudio] source.c: Created source 2 "alsa_input.pci-0000_00_14.2.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
( 0.117| 0.000) I: [pulseaudio] source.c: alsa.resolution_bits = "16"
( 0.117| 0.000) I: [pulseaudio] source.c: device.api = "alsa"
( 0.117| 0.000) I: [pulseaudio] source.c: device.class = "sound"
( 0.117| 0.000) I: [pulseaudio] source.c: alsa.class = "generic"
( 0.117| 0.000) I: [pulseaudio] source.c: alsa.subclass = "generic-mix"
( 0.117| 0.000) I: [pulseaudio] source.c: alsa.name = "CX20756 Analog"
( 0.117| 0.000) I: [pulseaudio] source.c: alsa.id = "CX20756 Analog"
( 0.117| 0.000) I: [pulseaudio] source.c: alsa.subdevice = "0"
( 0.117| 0.000) I: [pulseaudio] source.c: alsa.subdevice_name = "subdevice #0"
( 0.117| 0.000) I: [pulseaudio] source.c: alsa.device = "0"
( 0.117| 0.000) I: [pulseaudio] source.c: alsa.card = "1"
( 0.117| 0.000) I: [pulseaudio] source.c: alsa.card_name = "HD-Audio Generic"
( 0.117| 0.000) I: [pulseaudio] source.c: alsa.long_card_name = "HD-Audio Generic at 0xf1564000 irq 86"
( 0.117| 0.000) I: [pulseaudio] source.c: alsa.driver_name = "snd_hda_intel"
( 0.117| 0.000) I: [pulseaudio] source.c: device.bus_path = "pci-0000:00:14.2"
( 0.117| 0.000) I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card1"
( 0.117| 0.000) I: [pulseaudio] source.c: device.bus = "pci"
( 0.117| 0.000) I: [pulseaudio] source.c: device.vendor.id = "1022"
( 0.117| 0.000) I: [pulseaudio] source.c: device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
( 0.117| 0.000) I: [pulseaudio] source.c: device.product.id = "780d"
( 0.117| 0.000) I: [pulseaudio] source.c: device.product.name = "FCH Azalia Controller"
( 0.117| 0.000) I: [pulseaudio] source.c: device.form_factor = "internal"
( 0.117| 0.000) I: [pulseaudio] source.c: device.string = "front:1"
( 0.117| 0.000) I: [pulseaudio] source.c: device.buffering.buffer_size = "17664"
( 0.117| 0.000) I: [pulseaudio] source.c: device.buffering.fragment_size = "2944"
( 0.117| 0.000) I: [pulseaudio] source.c: device.access_mode = "mmap"
( 0.117| 0.000) I: [pulseaudio] source.c: device.profile.name = "analog-stereo"
( 0.117| 0.000) I: [pulseaudio] source.c: device.profile.description = "Analog Stereo"
( 0.117| 0.000) I: [pulseaudio] source.c: device.description = "Built-in Audio Analog Stereo"
( 0.117| 0.000) I: [pulseaudio] source.c: alsa.mixer_name = "Conexant CX20756"
( 0.117| 0.000) I: [pulseaudio] source.c: alsa.components = "HDA:14f15114,1179f920,00100100"
( 0.117| 0.000) I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
( 0.117| 0.000) I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
( 0.117| 0.000) I: [pulseaudio] alsa-source.c: Using 6.0 fragments of size 2944 bytes (16.69ms), buffer size is 17664 bytes (100.14ms)
( 0.117| 0.000) D: [pulseaudio] alsa-source.c: hwbuf_unused=0
( 0.117| 0.000) D: [pulseaudio] alsa-source.c: setting avail_min=1
( 0.117| 0.000) D: [pulseaudio] alsa-mixer.c: Activating path analog-input-internal-mic
( 0.117| 0.000) D: [pulseaudio] alsa-mixer.c: Path analog-input-internal-mic (Internal Microphone), direction=2, priority=89, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=80, min_dB=-74, max_dB=42
( 0.118| 0.000) D: [pulseaudio] alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
( 0.118| 0.000) D: [pulseaudio] alsa-mixer.c: Element Internal Mic Boost, direction=2, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
( 0.118| 0.000) D: [pulseaudio] alsa-mixer.c: Element Mic Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
( 0.118| 0.000) D: [pulseaudio] alsa-mixer.c: Jack Mic, alsa_name='Mic Jack', detection possible
( 0.118| 0.000) D: [pulseaudio] alsa-mixer.c: Jack Dock Mic, alsa_name='Dock Mic Jack', detection unavailable
( 0.118| 0.000) D: [pulseaudio] alsa-mixer.c: Jack Front Mic, alsa_name='Front Mic Jack', detection unavailable
( 0.118| 0.000) D: [pulseaudio] alsa-mixer.c: Jack Rear Mic, alsa_name='Rear Mic Jack', detection unavailable
( 0.118| 0.000) D: [pulseaudio] alsa-mixer.c: Jack Internal Mic Phantom, alsa_name='Internal Mic Phantom Jack', detection possible
( 0.118| 0.000) I: [pulseaudio] alsa-source.c: Successfully enabled deferred volume.
( 0.118| 0.000) I: [pulseaudio] alsa-source.c: Hardware volume ranges from -74.00 dB to 42.00 dB.
( 0.118| 0.000) I: [pulseaudio] alsa-source.c: Fixing base volume to -42.00 dB
( 0.118| 0.000) I: [pulseaudio] alsa-source.c: Using hardware volume control. Hardware dB scale supported.
( 0.118| 0.000) I: [pulseaudio] alsa-source.c: Using hardware mute control.
( 0.118| 0.000) D: [pulseaudio] alsa-util.c: snd_pcm_dump():
( 0.118| 0.000) D: [pulseaudio] alsa-util.c: Hardware PCM card 1 'HD-Audio Generic' device 0 subdevice 0
( 0.118| 0.000) D: [pulseaudio] alsa-util.c: Its setup is:
( 0.118| 0.000) D: [pulseaudio] alsa-util.c: stream : CAPTURE
( 0.118| 0.000) D: [pulseaudio] alsa-util.c: access : MMAP_INTERLEAVED
( 0.118| 0.000) D: [pulseaudio] alsa-util.c: format : S16_LE
( 0.118| 0.000) D: [pulseaudio] alsa-util.c: subformat : STD
( 0.118| 0.000) D: [pulseaudio] alsa-util.c: channels : 2
( 0.118| 0.000) D: [pulseaudio] alsa-util.c: rate : 44100
( 0.118| 0.000) D: [pulseaudio] alsa-util.c: exact rate : 44100 (44100/1)
( 0.118| 0.000) D: [pulseaudio] alsa-util.c: msbits : 16
( 0.118| 0.000) D: [pulseaudio] alsa-util.c: buffer_size : 4416
( 0.118| 0.000) D: [pulseaudio] alsa-util.c: period_size : 736
( 0.118| 0.000) D: [pulseaudio] alsa-util.c: period_time : 16689
( 0.118| 0.000) D: [pulseaudio] alsa-util.c: tstamp_mode : ENABLE
( 0.118| 0.000) D: [pulseaudio] alsa-util.c: period_step : 1
( 0.118| 0.000) D: [pulseaudio] alsa-util.c: avail_min : 736
( 0.118| 0.000) D: [pulseaudio] alsa-util.c: period_event : 1
( 0.118| 0.000) D: [pulseaudio] alsa-util.c: start_threshold : -1
( 0.118| 0.000) D: [pulseaudio] alsa-util.c: stop_threshold : 4971973988617027584
( 0.118| 0.000) D: [pulseaudio] alsa-util.c: silence_threshold: 0
( 0.118| 0.000) D: [pulseaudio] alsa-util.c: silence_size : 0
( 0.118| 0.000) D: [pulseaudio] alsa-util.c: boundary : 4971973988617027584
( 0.118| 0.000) D: [pulseaudio] alsa-util.c: appl_ptr : 0
( 0.118| 0.000) D: [pulseaudio] alsa-util.c: hw_ptr : 0
( 0.119| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: Thread starting up
( 0.119| 0.000) D: [pulseaudio] alsa-source.c: Requested volume: front-left: 44205 / 67% / -10.26 dB, front-right: 44205 / 67% / -10.26 dB
( 0.119| 0.000) D: [pulseaudio] alsa-source.c: Got hardware volume: front-left: 41350 / 63% / -12.00 dB, front-right: 41350 / 63% / -12.00 dB
( 0.119| 0.000) D: [pulseaudio] alsa-source.c: Calculated software volume: front-left: 70061 / 107% / 1.74 dB, front-right: 70061 / 107% / 1.74 dB (accurate-enough=no)
( 0.119| 0.000) D: [pulseaudio] alsa-source.c: Written HW volume did not match with the request: front-left: 44205 / 67% / -10.26 dB, front-right: 44205 / 67% / -10.26 dB (request) != front-left: 41350 / 63% / -12.00 dB, front-right: 41350 / 63% / -12.00 dB
( 0.127| 0.008) D: [alsa-source-CX20756 Analog] core-util.c: RealtimeKit worked.
( 0.127| 0.000) I: [alsa-source-CX20756 Analog] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
( 0.127| 0.000) I: [alsa-source-CX20756 Analog] alsa-source.c: Starting capture.
( 0.127| 0.000) I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #7; argument: "device_id="1" name="pci-0000_00_14.2" card_name="alsa_card.pci-0000_00_14.2" namereg_fail=false tsched=no fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
( 0.127| 0.000) I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:14.2/sound/card1 (alsa_card.pci-0000_00_14.2) module loaded.
( 0.127| 0.000) I: [pulseaudio] module-udev-detect.c: Found 2 cards.
( 0.127| 0.000) I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "tsched=0").
( 0.128| 0.000) D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-jackdbus-detect.so': failure
( 0.128| 0.000) D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-bluetooth-policy.so': failure
( 0.128| 0.000) D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-bluetooth-discover.so': failure
( 0.128| 0.000) D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-esound-protocol-unix.so': failure
( 0.129| 0.001) I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #8; argument: "").
( 0.129| 0.000) D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-gconf.so': failure
( 0.130| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 0.130| 0.000) I: [pulseaudio] module-default-device-restore.c: Restored default sink 'alsa_output.pci-0000_00_14.2.analog-stereo'.
( 0.130| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 0.130| 0.000) I: [pulseaudio] module-default-device-restore.c: Restored default source 'alsa_input.pci-0000_00_14.2.analog-stereo'.
( 0.130| 0.000) I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #9; argument: "").
( 0.131| 0.000) I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #10; argument: "").
( 0.131| 0.000) I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #11; argument: "").
( 0.132| 0.000) I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #12; argument: "").
( 0.133| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_01.1.hdmi-stereo becomes idle, timeout in 5 seconds.
( 0.133| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 0.133| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 0.133| 0.000) I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #13; argument: "").
( 0.133| 0.000) D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-console-kit.so': success
( 0.134| 0.000) I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #14; argument: "").
( 0.134| 0.000) D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-systemd-login.so': success
( 0.135| 0.000) I: [pulseaudio] client.c: Created 0 "Login Session 6"
( 0.135| 0.000) D: [pulseaudio] module-systemd-login.c: Added new session 6
( 0.135| 0.000) I: [pulseaudio] client.c: Created 1 "Login Session 1"
( 0.135| 0.000) D: [pulseaudio] module-systemd-login.c: Added new session 1
( 0.135| 0.000) I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #15; argument: "").
( 0.136| 0.000) I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #16; argument: "").
( 0.137| 0.000) D: [pulseaudio] module-role-cork.c: Using role 'phone' as trigger role.
( 0.137| 0.000) D: [pulseaudio] module-role-cork.c: Using roles 'music' and 'video' as cork roles.
( 0.137| 0.000) I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #17; argument: "").
( 0.138| 0.000) I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #18; argument: "").
( 0.138| 0.000) I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #19; argument: "").
( 0.139| 0.000) D: [pulseaudio] main.c: Got org.PulseAudio1!
( 0.140| 0.000) D: [pulseaudio] main.c: Got org.pulseaudio.Server!
( 0.140| 0.000) I: [pulseaudio] main.c: Daemon startup complete.
( 0.141| 0.000) I: [pulseaudio] client.c: Created 2 "Native client (UNIX socket client)"
( 0.141| 0.000) D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
( 0.141| 0.000) D: [pulseaudio] module-udev-detect.c: Resuming all sinks and sources of card alsa_card.pci-0000_00_01.1.
( 0.141| 0.000) D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC1 is accessible: yes
( 0.141| 0.000) D: [pulseaudio] module-udev-detect.c: Resuming all sinks and sources of card alsa_card.pci-0000_00_14.2.
( 0.141| 0.000) I: [pulseaudio] client.c: Created 3 "Native client (UNIX socket client)"
( 0.141| 0.000) D: [pulseaudio] protocol-native.c: Protocol version: remote 29, local 29
( 0.141| 0.000) I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
( 0.141| 0.000) D: [pulseaudio] protocol-native.c: SHM possible: yes
( 0.141| 0.000) D: [pulseaudio] protocol-native.c: Negotiated SHM: yes
( 0.141| 0.000) D: [pulseaudio] protocol-native.c: Protocol version: remote 29, local 29
( 0.141| 0.000) I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
( 0.142| 0.000) D: [pulseaudio] protocol-native.c: SHM possible: yes
( 0.142| 0.000) D: [pulseaudio] protocol-native.c: Negotiated SHM: yes
( 0.142| 0.000) D: [pulseaudio] module-augment-properties.c: Looking for .desktop file for gnome-settings-daemon
( 0.142| 0.000) D: [pulseaudio] module-augment-properties.c: Looking for .desktop file for gnome-shell
( 0.142| 0.000) D: [pulseaudio] module-augment-properties.c: Found /usr/share/applications/gnome-shell.desktop.
( 5.136| 4.993) I: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_14.2.analog-stereo idle for too long, suspending ...
( 5.136| 0.000) D: [pulseaudio] source.c: Suspend cause of source alsa_input.pci-0000_00_14.2.analog-stereo is 0x0004, suspending
( 5.137| 0.000) I: [alsa-source-CX20756 Analog] alsa-source.c: Device suspended...
( 5.137| 0.000) D: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
( 5.137| 0.000) I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo idle for too long, suspending ...
( 5.137| 0.000) D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_14.2.analog-stereo is 0x0004, suspending
( 5.139| 0.001) I: [alsa-sink-CX20756 Analog] alsa-sink.c: Device suspended...
( 5.139| 0.000) D: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
( 5.139| 0.000) I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_01.1.hdmi-stereo idle for too long, suspending ...
( 5.139| 0.000) D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_01.1.hdmi-stereo is 0x0004, suspending
( 5.140| 0.000) I: [alsa-sink-HDMI 0] alsa-sink.c: Device suspended...
( 5.140| 0.000) D: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
( 5.140| 0.000) D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
( 5.140| 0.000) D: [pulseaudio] module-udev-detect.c: Resuming all sinks and sources of card alsa_card.pci-0000_00_01.1.
( 5.140| 0.000) D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC1 is accessible: yes
( 5.140| 0.000) D: [pulseaudio] module-udev-detect.c: Resuming all sinks and sources of card alsa_card.pci-0000_00_14.2.
( 9.152| 4.011) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 9.152| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 24033 / 37% / -26.14 dB, front-right: 24033 / 37% / -26.14 dB
( 9.152| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 24163 / 37% / -26.00 dB, front-right: 24163 / 37% / -26.00 dB
( 9.152| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65183 / 99% / -0.14 dB, front-right: 65183 / 99% / -0.14 dB (accurate-enough=yes)
( 9.152| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 24033 at 3786596100
( 9.152| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 7969 usec
( 9.152| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 7947 usec
( 9.152| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 9.160| 0.007) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 24033 at 3786596100 was written 53 usec late
( 9.602| 0.442) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 11.172| 1.570) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 36611 / 56% / -15.17 dB, front-right: 36611 / 56% / -15.17 dB
( 11.173| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 36854 / 56% / -15.00 dB, front-right: 36854 / 56% / -15.00 dB
( 11.173| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65104 / 99% / -0.17 dB, front-right: 65104 / 99% / -0.17 dB (accurate-enough=yes)
( 11.173| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 36611 at 3788616626
( 11.173| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 7939 usec
( 11.173| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 7892 usec
( 11.173| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 7837 usec
( 11.173| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 7797 usec
( 11.173| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 11.173| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 11.173| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 7429 usec
( 11.173| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 7364 usec
( 11.173| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 36885 / 56% / -14.98 dB, front-right: 36885 / 56% / -14.98 dB
( 11.174| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 37137 / 57% / -14.80 dB, front-right: 37137 / 57% / -14.80 dB
( 11.174| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65091 / 99% / -0.18 dB, front-right: 65091 / 99% / -0.18 dB (accurate-enough=yes)
( 11.174| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 36885 at 3788617555
( 11.174| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 7018 usec
( 11.174| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 6973 usec
( 11.174| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 11.174| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 11.174| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 6533 usec
( 11.174| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 40440 / 62% / -12.58 dB, front-right: 40440 / 62% / -12.58 dB
( 11.174| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 40720 / 62% / -12.40 dB, front-right: 40720 / 62% / -12.40 dB
( 11.174| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65085 / 99% / -0.18 dB, front-right: 65085 / 99% / -0.18 dB (accurate-enough=yes)
( 11.174| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 40440 at 3788618401
( 11.175| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 11.175| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 11.175| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 40713 / 62% / -12.40 dB, front-right: 40713 / 62% / -12.40 dB
( 11.175| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 40720 / 62% / -12.40 dB, front-right: 40720 / 62% / -12.40 dB
( 11.175| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65525 / 100% / -0.00 dB, front-right: 65525 / 100% / -0.00 dB (accurate-enough=yes)
( 11.175| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 40713 at 3788619169
( 11.175| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 11.176| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 11.176| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 41260 / 63% / -12.06 dB, front-right: 41260 / 63% / -12.06 dB
( 11.176| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 41350 / 63% / -12.00 dB, front-right: 41350 / 63% / -12.00 dB
( 11.176| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65393 / 100% / -0.06 dB, front-right: 65393 / 100% / -0.06 dB (accurate-enough=yes)
( 11.176| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 41260 at 3788619929
( 11.176| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 11.176| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 11.177| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 39072 / 60% / -13.48 dB, front-right: 39072 / 60% / -13.48 dB
( 11.177| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 39188 / 60% / -13.40 dB, front-right: 39188 / 60% / -13.40 dB
( 11.177| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65342 / 100% / -0.08 dB, front-right: 65342 / 100% / -0.08 dB (accurate-enough=yes)
( 11.177| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 39072 at 3788620689
( 11.177| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 40440 at 3788618401 was dropped
( 11.177| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 40713 at 3788619169 was dropped
( 11.177| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 41260 at 3788619929 was dropped
( 11.177| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 11.177| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 11.177| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 38526 / 59% / -13.84 dB, front-right: 38526 / 59% / -13.84 dB
( 11.177| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 38591 / 59% / -13.80 dB, front-right: 38591 / 59% / -13.80 dB
( 11.177| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65426 / 100% / -0.04 dB, front-right: 65426 / 100% / -0.04 dB (accurate-enough=yes)
( 11.178| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 38526 at 3788621439
( 11.178| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 39072 at 3788620689 was dropped
( 11.178| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 11.178| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 11.178| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 37705 / 58% / -14.40 dB, front-right: 37705 / 58% / -14.40 dB
( 11.178| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 37712 / 58% / -14.40 dB, front-right: 37712 / 58% / -14.40 dB
( 11.178| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65524 / 100% / -0.00 dB, front-right: 65524 / 100% / -0.00 dB (accurate-enough=yes)
( 11.178| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 37705 at 3788622188
( 11.178| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 38526 at 3788621439 was dropped
( 11.178| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 11.179| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 11.179| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 37158 / 57% / -14.79 dB, front-right: 37158 / 57% / -14.79 dB
( 11.179| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 37423 / 57% / -14.60 dB, front-right: 37423 / 57% / -14.60 dB
( 11.179| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65072 / 99% / -0.19 dB, front-right: 65072 / 99% / -0.19 dB (accurate-enough=yes)
( 11.179| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 37158 at 3788622984
( 11.179| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 37705 at 3788622188 was dropped
( 11.179| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 11.179| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 11.180| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 36338 / 55% / -15.37 dB, front-right: 36338 / 55% / -15.37 dB
( 11.180| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 36572 / 56% / -15.20 dB, front-right: 36572 / 56% / -15.20 dB
( 11.180| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65117 / 99% / -0.17 dB, front-right: 65117 / 99% / -0.17 dB (accurate-enough=yes)
( 11.180| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 36338 at 3788623742
( 11.180| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 36611 at 3788616626 was dropped
( 11.180| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 36885 at 3788617555 was dropped
( 11.180| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 37158 at 3788622984 was dropped
( 11.180| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 11.180| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 11.181| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 34971 / 53% / -16.37 dB, front-right: 34971 / 53% / -16.37 dB
( 11.181| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 35195 / 54% / -16.20 dB, front-right: 35195 / 54% / -16.20 dB
( 11.181| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65119 / 99% / -0.17 dB, front-right: 65119 / 99% / -0.17 dB (accurate-enough=yes)
( 11.181| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 34971 at 3788624655
( 11.181| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 36338 at 3788623742 was dropped
( 11.181| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 11.181| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 11.181| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 33057 / 50% / -17.83 dB, front-right: 33057 / 50% / -17.83 dB
( 11.181| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 33099 / 51% / -17.80 dB, front-right: 33099 / 51% / -17.80 dB
( 11.182| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65453 / 100% / -0.03 dB, front-right: 65453 / 100% / -0.03 dB (accurate-enough=yes)
( 11.182| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 33057 at 3788625503
( 11.182| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 34971 at 3788624655 was dropped
( 11.182| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 11.182| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 11.182| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 30328 / 46% / -20.08 dB, front-right: 30328 / 46% / -20.08 dB
( 11.182| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 30419 / 46% / -20.00 dB, front-right: 30419 / 46% / -20.00 dB
( 11.182| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65340 / 100% / -0.08 dB, front-right: 65340 / 100% / -0.08 dB (accurate-enough=yes)
( 11.182| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 30328 at 3788626185
( 11.182| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 33057 at 3788625503 was dropped
( 11.183| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 11.183| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 11.183| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 28219 / 43% / -21.96 dB, front-right: 28219 / 43% / -21.96 dB
( 11.183| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 28389 / 43% / -21.80 dB, front-right: 28389 / 43% / -21.80 dB
( 11.183| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65144 / 99% / -0.16 dB, front-right: 65144 / 99% / -0.16 dB (accurate-enough=yes)
( 11.183| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 28219 at 3788627045
( 11.183| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 30328 at 3788626185 was dropped
( 11.183| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 11.184| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 11.184| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 27235 / 42% / -22.88 dB, front-right: 27235 / 42% / -22.88 dB
( 11.184| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 27320 / 42% / -22.80 dB, front-right: 27320 / 42% / -22.80 dB
( 11.184| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65332 / 100% / -0.08 dB, front-right: 65332 / 100% / -0.08 dB (accurate-enough=yes)
( 11.184| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 27235 at 3788627840
( 11.184| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 28219 at 3788627045 was dropped
( 11.184| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 11.184| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 11.184| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 26961 / 41% / -23.14 dB, front-right: 26961 / 41% / -23.14 dB
( 11.184| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 27111 / 41% / -23.00 dB, front-right: 27111 / 41% / -23.00 dB
( 11.184| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65173 / 99% / -0.14 dB, front-right: 65173 / 99% / -0.14 dB (accurate-enough=yes)
( 11.184| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 26961 at 3788628399
( 11.185| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 27235 at 3788627840 was dropped
( 11.185| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 11.185| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 11.185| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 26688 / 41% / -23.41 dB, front-right: 26688 / 41% / -23.41 dB
( 11.185| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 26698 / 41% / -23.40 dB, front-right: 26698 / 41% / -23.40 dB
( 11.185| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65511 / 100% / -0.01 dB, front-right: 65511 / 100% / -0.01 dB (accurate-enough=yes)
( 11.185| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 26688 at 3788628855
( 11.185| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 26961 at 3788628399 was dropped
( 11.185| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 11.185| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 11.185| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 24774 / 38% / -25.35 dB, front-right: 24774 / 38% / -25.35 dB
( 11.185| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 24916 / 38% / -25.20 dB, front-right: 24916 / 38% / -25.20 dB
( 11.185| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65163 / 99% / -0.15 dB, front-right: 65163 / 99% / -0.15 dB (accurate-enough=yes)
( 11.185| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 24774 at 3788629293
( 11.185| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 26688 at 3788628855 was dropped
( 11.185| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 11.186| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 11.186| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 24774 / 38% / -25.35 dB, front-right: 24774 / 38% / -25.35 dB
( 11.186| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 24916 / 38% / -25.20 dB, front-right: 24916 / 38% / -25.20 dB
( 11.186| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65163 / 99% / -0.15 dB, front-right: 65163 / 99% / -0.15 dB (accurate-enough=yes)
( 11.186| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 24774 at 3788629725
( 11.186| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 24774 at 3788629293 was dropped
( 11.186| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 11.186| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 24774 / 38% / -25.35 dB, front-right: 24774 / 38% / -25.35 dB
( 11.186| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 24916 / 38% / -25.20 dB, front-right: 24916 / 38% / -25.20 dB
( 11.186| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65163 / 99% / -0.15 dB, front-right: 65163 / 99% / -0.15 dB (accurate-enough=yes)
( 11.186| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 24774 at 3788630012
( 11.186| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 24774 at 3788629725 was dropped
( 11.186| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 11.186| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 15959 / 24% / -36.81 dB, front-right: 15959 / 24% / -36.81 dB
( 11.186| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 15964 / 24% / -36.80 dB, front-right: 15964 / 24% / -36.80 dB
( 11.186| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65515 / 100% / -0.01 dB, front-right: 65515 / 100% / -0.01 dB (accurate-enough=yes)
( 11.186| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 15959 at 3788614376
( 11.186| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 24774 at 3788630012 was dropped
( 11.187| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 15959 at 3788614376 was written 8054 usec late
( 11.187| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 11.187| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 13.196| 2.009) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 15412 / 24% / -37.72 dB, front-right: 15412 / 24% / -37.72 dB
( 13.197| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 15481 / 24% / -37.60 dB, front-right: 15481 / 24% / -37.60 dB
( 13.197| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65244 / 100% / -0.12 dB, front-right: 65244 / 100% / -0.12 dB (accurate-enough=yes)
( 13.197| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 15412 at 3790624573
( 13.197| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 15412 at 3790624573 was written 8056 usec late
( 13.197| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 15.204| 2.007) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Written HW volume did not match with the request: front-left: 15412 / 24% / -37.72 dB, front-right: 15412 / 24% / -37.72 dB (request) != front-left: 15246 / 23% / -38.00 dB, front-right: 15246 / 23% / -38.00 dB
( 15.205| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 15.205| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 15138 / 23% / -38.18 dB, front-right: 15138 / 23% / -38.18 dB
( 15.205| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 15246 / 23% / -38.00 dB, front-right: 15246 / 23% / -38.00 dB
( 15.205| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65072 / 99% / -0.19 dB, front-right: 65072 / 99% / -0.19 dB (accurate-enough=yes)
( 15.205| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 15138 at 3792632602
( 15.205| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 15138 at 3792632602 was written 8028 usec late
( 15.205| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 15.205| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 15.205| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 12677 / 19% / -42.81 dB, front-right: 12677 / 19% / -42.81 dB
( 15.205| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 12681 / 19% / -42.80 dB, front-right: 12681 / 19% / -42.80 dB
( 15.205| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65515 / 100% / -0.01 dB, front-right: 65515 / 100% / -0.01 dB (accurate-enough=yes)
( 15.205| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 12677 at 3792633019
( 15.205| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 12677 at 3792633019 was written 8023 usec late
( 15.205| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 15.205| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 17.212| 2.007) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 35294 / 54% / -16.13 dB, front-right: 35294 / 54% / -16.13 dB
( 17.213| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 35466 / 54% / -16.00 dB, front-right: 35466 / 54% / -16.00 dB
( 17.213| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65218 / 100% / -0.13 dB, front-right: 65218 / 100% / -0.13 dB (accurate-enough=yes)
( 17.213| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 35294 at 3794656490
( 17.213| 0.000) D: [alsa-sink-CX20756 Analog] ratelimit.c: 73 events suppressed
( 17.213| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 7968 usec
( 17.213| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 7925 usec
( 17.213| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 7896 usec
( 17.213| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 7874 usec
( 17.213| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 17.213| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 17.213| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 7609 usec
( 17.213| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 7582 usec
( 17.213| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 35567 / 54% / -15.93 dB, front-right: 35567 / 54% / -15.93 dB
( 17.213| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 35740 / 55% / -15.80 dB, front-right: 35740 / 55% / -15.80 dB
( 17.213| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65219 / 100% / -0.13 dB, front-right: 65219 / 100% / -0.13 dB (accurate-enough=yes)
( 17.213| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 35567 at 3794657045
( 17.213| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 7419 usec
( 17.213| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 7396 usec
( 17.213| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 17.215| 0.001) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 17.215| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 5960 usec
( 17.215| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 5930 usec
( 17.215| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 35841 / 55% / -15.73 dB, front-right: 35841 / 55% / -15.73 dB
( 17.215| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 36015 / 55% / -15.60 dB, front-right: 36015 / 55% / -15.60 dB
( 17.215| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65219 / 100% / -0.13 dB, front-right: 65219 / 100% / -0.13 dB (accurate-enough=yes)
( 17.215| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 35841 at 3794658702
( 17.215| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 5764 usec
( 17.215| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 17.215| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 17.215| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 36935 / 56% / -14.94 dB, front-right: 36935 / 56% / -14.94 dB
( 17.215| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 37137 / 57% / -14.80 dB, front-right: 37137 / 57% / -14.80 dB
( 17.215| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65180 / 99% / -0.14 dB, front-right: 65180 / 99% / -0.14 dB (accurate-enough=yes)
( 17.215| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 36935 at 3794659037
( 17.215| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 17.215| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 17.215| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 38302 / 58% / -14.00 dB, front-right: 38302 / 58% / -14.00 dB
( 17.215| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 38591 / 59% / -13.80 dB, front-right: 38591 / 59% / -13.80 dB
( 17.215| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65045 / 99% / -0.20 dB, front-right: 65045 / 99% / -0.20 dB (accurate-enough=yes)
( 17.215| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 38302 at 3794659369
( 17.216| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 17.216| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 17.216| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 40216 / 61% / -12.72 dB, front-right: 40216 / 61% / -12.72 dB
( 17.216| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 40409 / 62% / -12.60 dB, front-right: 40409 / 62% / -12.60 dB
( 17.216| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65223 / 100% / -0.12 dB, front-right: 65223 / 100% / -0.12 dB (accurate-enough=yes)
( 17.216| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 40216 at 3794659694
( 17.216| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 17.216| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 17.216| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 40763 / 62% / -12.37 dB, front-right: 40763 / 62% / -12.37 dB
( 17.216| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 41034 / 63% / -12.20 dB, front-right: 41034 / 63% / -12.20 dB
( 17.216| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65103 / 99% / -0.17 dB, front-right: 65103 / 99% / -0.17 dB (accurate-enough=yes)
( 17.216| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 40763 at 3794660032
( 17.216| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 17.216| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 17.216| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 41036 / 63% / -12.20 dB, front-right: 41036 / 63% / -12.20 dB
( 17.216| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 41350 / 63% / -12.00 dB, front-right: 41350 / 63% / -12.00 dB
( 17.216| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65038 / 99% / -0.20 dB, front-right: 65038 / 99% / -0.20 dB (accurate-enough=yes)
( 17.216| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 41036 at 3794660354
( 17.217| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 17.217| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 17.217| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 41310 / 63% / -12.03 dB, front-right: 41310 / 63% / -12.03 dB
( 17.217| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 41350 / 63% / -12.00 dB, front-right: 41350 / 63% / -12.00 dB
( 17.217| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65473 / 100% / -0.03 dB, front-right: 65473 / 100% / -0.03 dB (accurate-enough=yes)
( 17.217| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 41310 at 3794660687
( 17.217| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 17.217| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 17.217| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 41857 / 64% / -11.68 dB, front-right: 41857 / 64% / -11.68 dB
( 17.217| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 41990 / 64% / -11.60 dB, front-right: 41990 / 64% / -11.60 dB
( 17.217| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65328 / 100% / -0.08 dB, front-right: 65328 / 100% / -0.08 dB (accurate-enough=yes)
( 17.217| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 41857 at 3794661009
( 17.217| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 17.217| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 17.217| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 42404 / 65% / -11.34 dB, front-right: 42404 / 65% / -11.34 dB
( 17.217| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 42640 / 65% / -11.20 dB, front-right: 42640 / 65% / -11.20 dB
( 17.217| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65173 / 99% / -0.14 dB, front-right: 65173 / 99% / -0.14 dB (accurate-enough=yes)
( 17.217| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 42404 at 3794661331
( 17.217| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 17.218| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 17.218| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 42950 / 66% / -11.01 dB, front-right: 42950 / 66% / -11.01 dB
( 17.218| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 42968 / 66% / -11.00 dB, front-right: 42968 / 66% / -11.00 dB
( 17.218| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65509 / 100% / -0.01 dB, front-right: 65509 / 100% / -0.01 dB (accurate-enough=yes)
( 17.218| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 42950 at 3794661651
( 17.218| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 17.218| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 17.218| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 43224 / 66% / -10.85 dB, front-right: 43224 / 66% / -10.85 dB
( 17.218| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 43299 / 66% / -10.80 dB, front-right: 43299 / 66% / -10.80 dB
( 17.218| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65422 / 100% / -0.05 dB, front-right: 65422 / 100% / -0.05 dB (accurate-enough=yes)
( 17.218| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 43224 at 3794661984
( 17.218| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 17.218| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 17.218| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 43224 / 66% / -10.85 dB, front-right: 43224 / 66% / -10.85 dB
( 17.218| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 43299 / 66% / -10.80 dB, front-right: 43299 / 66% / -10.80 dB
( 17.218| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65422 / 100% / -0.05 dB, front-right: 65422 / 100% / -0.05 dB (accurate-enough=yes)
( 17.218| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 43224 at 3794662302
( 17.218| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 43224 at 3794661984 was dropped
( 17.218| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 17.219| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 42950 / 66% / -11.01 dB, front-right: 42950 / 66% / -11.01 dB
( 17.219| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 42968 / 66% / -11.00 dB, front-right: 42968 / 66% / -11.00 dB
( 17.219| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65509 / 100% / -0.01 dB, front-right: 65509 / 100% / -0.01 dB (accurate-enough=yes)
( 17.219| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 42950 at 3794662574
( 17.219| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 42950 at 3794661651 was dropped
( 17.219| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 43224 at 3794662302 was dropped
( 17.219| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 17.219| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 17.219| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 42677 / 65% / -11.18 dB, front-right: 42677 / 65% / -11.18 dB
( 17.219| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 42968 / 66% / -11.00 dB, front-right: 42968 / 66% / -11.00 dB
( 17.219| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65092 / 99% / -0.18 dB, front-right: 65092 / 99% / -0.18 dB (accurate-enough=yes)
( 17.219| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 42677 at 3794662951
( 17.219| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 42950 at 3794662574 was dropped
( 17.219| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 17.219| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 17.219| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 41857 / 64% / -11.68 dB, front-right: 41857 / 64% / -11.68 dB
( 17.219| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 41990 / 64% / -11.60 dB, front-right: 41990 / 64% / -11.60 dB
( 17.219| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65328 / 100% / -0.08 dB, front-right: 65328 / 100% / -0.08 dB (accurate-enough=yes)
( 17.219| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 41857 at 3794663308
( 17.219| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 41857 at 3794661009 was dropped
( 17.219| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 42404 at 3794661331 was dropped
( 17.219| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 42677 at 3794662951 was dropped
( 17.220| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 17.220| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 17.220| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 40216 / 61% / -12.72 dB, front-right: 40216 / 61% / -12.72 dB
( 17.220| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 40409 / 62% / -12.60 dB, front-right: 40409 / 62% / -12.60 dB
( 17.220| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65223 / 100% / -0.12 dB, front-right: 65223 / 100% / -0.12 dB (accurate-enough=yes)
( 17.220| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 40216 at 3794663703
( 17.220| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 40216 at 3794659694 was dropped
( 17.220| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 40763 at 3794660032 was dropped
( 17.220| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 41036 at 3794660354 was dropped
( 17.220| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 41310 at 3794660687 was dropped
( 17.220| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 41857 at 3794663308 was dropped
( 17.220| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 17.220| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 17.220| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 38575 / 59% / -13.81 dB, front-right: 38575 / 59% / -13.81 dB
( 17.220| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 38591 / 59% / -13.80 dB, front-right: 38591 / 59% / -13.80 dB
( 17.220| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65509 / 100% / -0.01 dB, front-right: 65509 / 100% / -0.01 dB (accurate-enough=yes)
( 17.220| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 38575 at 3794664157
( 17.220| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 40216 at 3794663703 was dropped
( 17.220| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 17.220| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 17.221| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 35372 / 54% / -16.07 dB, front-right: 35372 / 54% / -16.07 dB
( 17.221| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 35466 / 54% / -16.00 dB, front-right: 35466 / 54% / -16.00 dB
( 17.221| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65362 / 100% / -0.07 dB, front-right: 65362 / 100% / -0.07 dB (accurate-enough=yes)
( 17.221| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 35372 at 3794664514
( 17.221| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 35567 at 3794657045 was dropped
( 17.221| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 35841 at 3794658702 was dropped
( 17.221| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 36935 at 3794659037 was dropped
( 17.221| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 38302 at 3794659369 was dropped
( 17.221| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 38575 at 3794664157 was dropped
( 17.221| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 35294 at 3794656490 was written 178 usec late
( 17.224| 0.003) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 17.224| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 19.228| 2.003) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 35372 at 3794664514 was written 1999630 usec late
( 19.228| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 31162 / 48% / -19.37 dB, front-right: 31162 / 48% / -19.37 dB
( 19.228| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 31367 / 48% / -19.20 dB, front-right: 31367 / 48% / -19.20 dB
( 19.228| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65108 / 99% / -0.17 dB, front-right: 65108 / 99% / -0.17 dB (accurate-enough=yes)
( 19.229| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 31162 at 3796656438
( 19.229| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 31162 at 3796656438 was written 8035 usec late
( 19.229| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 19.229| 0.000) I: [pulseaudio] module-device-restore.c: Synced.
( 21.237| 2.007) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 21.237| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 26909 / 41% / -23.19 dB, front-right: 26909 / 41% / -23.19 dB
( 21.237| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 27111 / 41% / -23.00 dB, front-right: 27111 / 41% / -23.00 dB
( 21.237| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65048 / 99% / -0.19 dB, front-right: 65048 / 99% / -0.19 dB (accurate-enough=yes)
( 21.237| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 26909 at 3798665018
( 21.237| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 26909 at 3798665018 was written 8060 usec late
( 21.237| 0.000) I: [pulseaudio] client.c: Created 4 "Native client (UNIX socket client)"
( 21.237| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 21.238| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 23.248| 2.010) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 23209 / 35% / -27.05 dB, front-right: 23209 / 35% / -27.05 dB
( 23.249| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 23253 / 35% / -27.00 dB, front-right: 23253 / 35% / -27.00 dB
( 23.249| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65412 / 100% / -0.05 dB, front-right: 65412 / 100% / -0.05 dB (accurate-enough=yes)
( 23.249| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 23209 at 3800676654
( 23.249| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 23209 at 3800676654 was written 8063 usec late
( 23.249| 0.000) D: [pulseaudio] protocol-native.c: Protocol version: remote 29, local 29
( 23.249| 0.000) I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
( 23.249| 0.000) D: [pulseaudio] protocol-native.c: SHM possible: yes
( 23.249| 0.000) D: [pulseaudio] protocol-native.c: Negotiated SHM: yes
( 23.249| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 25.257| 2.007) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 25.257| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 19130 / 29% / -32.09 dB, front-right: 19130 / 29% / -32.09 dB
( 25.257| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 19193 / 29% / -32.00 dB, front-right: 19193 / 29% / -32.00 dB
( 25.257| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65321 / 100% / -0.09 dB, front-right: 65321 / 100% / -0.09 dB (accurate-enough=yes)
( 25.257| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 19130 at 3802685038
( 25.257| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 19130 at 3802685038 was written 8059 usec late
( 25.257| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 25.258| 0.000) D: [pulseaudio] module-augment-properties.c: Looking for .desktop file for iceweasel
( 25.258| 0.000) D: [pulseaudio] module-augment-properties.c: Found /usr/share/applications/iceweasel.desktop.
( 25.258| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 27.264| 2.006) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 13895 / 21% / -40.42 dB, front-right: 13895 / 21% / -40.42 dB
( 27.265| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 13904 / 21% / -40.40 dB, front-right: 13904 / 21% / -40.40 dB
( 27.265| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65494 / 100% / -0.02 dB, front-right: 65494 / 100% / -0.02 dB (accurate-enough=yes)
( 27.265| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 13895 at 3804692583
( 27.265| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 13895 at 3804692583 was written 8033 usec late
( 27.265| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 29.277| 2.011) I: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-application-name:AudioStream.
( 29.277| 0.000) D: [pulseaudio] module-intended-roles.c: Not setting device for stream AudioStream, because already set.
( 29.277| 0.000) D: [pulseaudio] sink-input.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "48000" format.channels = "1" format.channel_map = "\"mono\""
( 29.277| 0.000) I: [pulseaudio] sink-input.c: Trying to change sample rate
( 29.277| 0.000) D: [pulseaudio] sink.c: Suspending sink alsa_output.pci-0000_00_14.2.analog-stereo due to changing the sample rate.
( 29.277| 0.000) I: [pulseaudio] alsa-sink.c: Updating rate for device front:1, new rate is 48000
( 29.277| 0.000) D: [pulseaudio] source.c: Suspending source alsa_output.pci-0000_00_14.2.analog-stereo.monitor due to changing the sample rate.
( 29.277| 0.000) I: [pulseaudio] source.c: Changed sampling rate successfully
( 29.277| 0.000) I: [pulseaudio] sink.c: Changed sampling rate successfully
( 29.277| 0.000) I: [pulseaudio] sink-input.c: Rate changed to 48000 Hz
( 29.277| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring volume for sink input sink-input-by-application-name:AudioStream.
( 29.277| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for sink input sink-input-by-application-name:AudioStream.
( 29.277| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 29.277| 0.000) D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_14.2.analog-stereo is 0x0000, resuming
( 29.279| 0.001) D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio1'
( 29.279| 0.000) I: [alsa-sink-CX20756 Analog] alsa-sink.c: Trying resume...
( 29.280| 0.001) D: [alsa-sink-CX20756 Analog] alsa-util.c: Maximum hw buffer size is 341 ms
( 33.312| 4.032) D: [alsa-sink-CX20756 Analog] alsa-util.c: Set buffer size first (to 4416 samples), period size second (to 736 samples).
( 33.312| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: hwbuf_unused=0
( 33.313| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: setting avail_min=1
( 33.313| 0.000) I: [alsa-sink-CX20756 Analog] alsa-sink.c: Resumed successfully...
( 33.313| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 33.313| 0.000) I: [alsa-sink-CX20756 Analog] alsa-sink.c: Starting playback.
( 33.313| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 33.313| 0.000) I: [pulseaudio] resampler.c: Forcing resampler 'copy', because of fixed, identical sample rates.
( 33.313| 0.000) D: [pulseaudio] resampler.c: Channel matrix:
( 33.313| 0.000) D: [pulseaudio] resampler.c: I00
( 33.313| 0.000) D: [pulseaudio] resampler.c: +------
( 33.313| 0.000) D: [pulseaudio] resampler.c: O00 | 1.000
( 33.313| 0.000) D: [pulseaudio] resampler.c: O01 | 1.000
( 33.313| 0.000) I: [pulseaudio] remap_sse.c: Using SSE2 mono to stereo remapping
( 33.313| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 33.313| 0.000) D: [pulseaudio] resampler.c: rate 48000 -> 48000 (method copy)
( 33.313| 0.000) D: [pulseaudio] resampler.c: format float32le -> s16le (intermediate s16le)
( 33.313| 0.000) D: [pulseaudio] resampler.c: channels 1 -> 2 (resampling 1)
( 33.314| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 33.314| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 33.314| 0.000) I: [pulseaudio] sink-input.c: Created input 0 "AudioStream" on alsa_output.pci-0000_00_14.2.analog-stereo with sample spec float32le 1ch 48000Hz and channel map mono
( 33.314| 0.000) I: [pulseaudio] sink-input.c: media.name = "AudioStream"
( 33.314| 0.000) I: [pulseaudio] sink-input.c: application.name = "AudioStream"
( 33.314| 0.000) I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
( 33.314| 0.000) I: [pulseaudio] sink-input.c: native-protocol.version = "29"
( 33.314| 0.000) I: [pulseaudio] sink-input.c: application.process.id = "4321"
( 33.314| 0.000) I: [pulseaudio] sink-input.c: application.process.user = "david"
( 33.314| 0.000) I: [pulseaudio] sink-input.c: application.process.host = "fuileach"
( 33.314| 0.000) I: [pulseaudio] sink-input.c: application.process.binary = "iceweasel"
( 33.314| 0.000) I: [pulseaudio] sink-input.c: window.x11.display = ":0"
( 33.314| 0.000) I: [pulseaudio] sink-input.c: application.language = "ga_IE.UTF-8"
( 33.314| 0.000) I: [pulseaudio] sink-input.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 33.314| 0.000) I: [pulseaudio] sink-input.c: application.process.session_id = "1"
( 33.314| 0.000) I: [pulseaudio] sink-input.c: application.icon_name = "iceweasel"
( 33.314| 0.000) I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-application-name:AudioStream"
( 33.314| 0.000) I: [pulseaudio] protocol-native.c: Requested tlength=100.00 ms, minreq=25.00 ms
( 33.314| 0.000) D: [pulseaudio] protocol-native.c: Traditional mode enabled, modifying sink usec only for compat with minreq.
( 33.314| 0.000) D: [pulseaudio] protocol-native.c: Requested latency=50.00 ms, Received latency=100.14 ms
( 33.314| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=28828, base=4, prebuf=24032, minreq=4800 maxrewind=0
( 33.314| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=28828, base=4, prebuf=24032, minreq=4800 maxrewind=0
( 33.314| 0.000) I: [pulseaudio] protocol-native.c: Final latency 250.28 ms = 100.14 ms + 2*25.00 ms + 100.14 ms
( 33.315| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 13895 / 21% / -40.42 dB, front-right: 13895 / 21% / -40.42 dB
( 33.315| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 13904 / 21% / -40.40 dB, front-right: 13904 / 21% / -40.40 dB
( 33.315| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65494 / 100% / -0.02 dB, front-right: 65494 / 100% / -0.02 dB (accurate-enough=yes)
( 33.315| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume not changing
( 33.315| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 33.315| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 33.315| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 33.316| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 12504 / 19% / -43.17 dB, front-right: 12504 / 19% / -43.17 dB
( 33.316| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 12584 / 19% / -43.00 dB, front-right: 12584 / 19% / -43.00 dB
( 33.316| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65119 / 99% / -0.17 dB, front-right: 65119 / 99% / -0.17 dB (accurate-enough=yes)
( 33.316| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 12504 at 3810835413
( 33.316| 0.000) D: [alsa-sink-CX20756 Analog] ratelimit.c: 68 events suppressed
( 33.316| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 83745 usec
( 33.316| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 83593 usec
( 33.316| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 33.316| 0.000) I: [pulseaudio] module-device-restore.c: Synced.
( 33.316| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 83037 usec
( 33.317| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 82891 usec
( 33.317| 0.000) D: [alsa-sink-CX20756 Analog] protocol-native.c: Requesting rewind due to end of underrun.
( 33.317| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 82735 usec
( 33.317| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 82599 usec
( 33.317| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 82540 usec
( 33.317| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 82350 usec
( 33.317| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 82291 usec
( 33.317| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 33.317| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 82122 usec
( 33.317| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 11957 / 18% / -44.33 dB, front-right: 11957 / 18% / -44.33 dB
( 33.318| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 12017 / 18% / -44.20 dB, front-right: 12017 / 18% / -44.20 dB
( 33.318| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65209 / 100% / -0.13 dB, front-right: 65209 / 100% / -0.13 dB (accurate-enough=yes)
( 33.318| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 11957 at 3810837287
( 33.318| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 81778 usec
( 33.318| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 33.318| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 33.319| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 11684 / 18% / -44.93 dB, front-right: 11684 / 18% / -44.93 dB
( 33.319| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 11744 / 18% / -44.80 dB, front-right: 11744 / 18% / -44.80 dB
( 33.319| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65201 / 99% / -0.13 dB, front-right: 65201 / 99% / -0.13 dB (accurate-enough=yes)
( 33.319| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 11684 at 3810838558
( 33.319| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 33.320| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 33.320| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 12231 / 19% / -43.74 dB, front-right: 12231 / 19% / -43.74 dB
( 33.320| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 12298 / 19% / -43.60 dB, front-right: 12298 / 19% / -43.60 dB
( 33.320| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65179 / 99% / -0.14 dB, front-right: 65179 / 99% / -0.14 dB (accurate-enough=yes)
( 33.320| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 12231 at 3810855726
( 33.320| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 33.321| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 33.321| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 15467 / 24% / -37.62 dB, front-right: 15467 / 24% / -37.62 dB
( 33.321| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 15481 / 24% / -37.60 dB, front-right: 15481 / 24% / -37.60 dB
( 33.321| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65477 / 100% / -0.02 dB, front-right: 65477 / 100% / -0.02 dB (accurate-enough=yes)
( 33.321| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 15467 at 3810857101
( 33.322| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 33.322| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 33.323| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 20278 / 31% / -30.57 dB, front-right: 20278 / 31% / -30.57 dB
( 33.323| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 20408 / 31% / -30.40 dB, front-right: 20408 / 31% / -30.40 dB
( 33.323| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65119 / 99% / -0.17 dB, front-right: 65119 / 99% / -0.17 dB (accurate-enough=yes)
( 33.323| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 20278 at 3810858434
( 33.323| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 33.324| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 33.324| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 26578 / 41% / -23.52 dB, front-right: 26578 / 41% / -23.52 dB
( 33.324| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 26698 / 41% / -23.40 dB, front-right: 26698 / 41% / -23.40 dB
( 33.324| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65241 / 100% / -0.12 dB, front-right: 65241 / 100% / -0.12 dB (accurate-enough=yes)
( 33.324| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 26578 at 3810859768
( 33.324| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 33.325| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 33.325| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 40743 / 62% / -12.39 dB, front-right: 40743 / 62% / -12.39 dB
( 33.325| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 41034 / 63% / -12.20 dB, front-right: 41034 / 63% / -12.20 dB
( 33.325| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65071 / 99% / -0.19 dB, front-right: 65071 / 99% / -0.19 dB (accurate-enough=yes)
( 33.325| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 40743 at 3810860808
( 33.325| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 33.325| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 40743 / 62% / -12.39 dB, front-right: 40743 / 62% / -12.39 dB
( 33.325| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 41034 / 63% / -12.20 dB, front-right: 41034 / 63% / -12.20 dB
( 33.325| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65071 / 99% / -0.19 dB, front-right: 65071 / 99% / -0.19 dB (accurate-enough=yes)
( 33.326| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 40743 at 3810861268
( 33.326| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 40743 at 3810860808 was dropped
( 33.326| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 33.326| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 33.326| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 17360 bytes.
( 33.326| 0.000) D: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
( 33.326| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 4340
( 33.326| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 4340
( 33.326| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 17360 bytes.
( 33.326| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 33.326| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 1211
( 33.326| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 12504 at 3810754869 was written 6791 usec late
( 33.326| 0.000) I: [pulseaudio] sink-input.c: Freeing input 0 "AudioStream"
( 33.326| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 11957 at 3810754869 was written 6791 usec late
( 33.326| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 11684 at 3810754869 was written 6791 usec late
( 35.332| 2.006) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 35.333| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 12231 at 3810770869 was written 1997700 usec late
( 35.333| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 15467 at 3810770869 was written 1997700 usec late
( 35.333| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 20278 at 3810770869 was written 1997700 usec late
( 35.333| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 26578 at 3810770869 was written 1997700 usec late
( 35.333| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 40743 at 3810770869 was written 1997700 usec late
( 37.341| 2.007) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 37.341| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 47217 / 72% / -8.54 dB, front-right: 47217 / 72% / -8.54 dB
( 37.341| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 47477 / 72% / -8.40 dB, front-right: 47477 / 72% / -8.40 dB
( 37.341| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65177 / 99% / -0.14 dB, front-right: 65177 / 99% / -0.14 dB (accurate-enough=yes)
( 37.341| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 47217 at 3814784897
( 37.341| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 37.341| 0.000) I: [pulseaudio] client.c: Created 5 "Native client (UNIX socket client)"
( 37.342| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-application-name:AudioStream.
( 37.342| 0.000) D: [pulseaudio] module-intended-roles.c: Not setting device for stream AudioStream, because already set.
( 37.342| 0.000) D: [pulseaudio] sink-input.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "48000" format.channels = "1" format.channel_map = "\"mono\""
( 37.342| 0.000) I: [pulseaudio] sink-input.c: Trying to change sample rate
( 37.342| 0.000) I: [pulseaudio] sink-input.c: Rate changed to 48000 Hz
( 37.342| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring volume for sink input sink-input-by-application-name:AudioStream.
( 37.342| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for sink input sink-input-by-application-name:AudioStream.
( 37.342| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 37.342| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 37.342| 0.000) I: [pulseaudio] resampler.c: Forcing resampler 'copy', because of fixed, identical sample rates.
( 37.342| 0.000) D: [pulseaudio] resampler.c: Channel matrix:
( 37.342| 0.000) D: [pulseaudio] resampler.c: I00
( 37.342| 0.000) D: [pulseaudio] resampler.c: +------
( 37.342| 0.000) D: [pulseaudio] resampler.c: O00 | 1.000
( 37.342| 0.000) D: [pulseaudio] resampler.c: O01 | 1.000
( 37.342| 0.000) I: [pulseaudio] remap_sse.c: Using SSE2 mono to stereo remapping
( 37.342| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 37.342| 0.000) D: [pulseaudio] resampler.c: rate 48000 -> 48000 (method copy)
( 37.342| 0.000) D: [pulseaudio] resampler.c: format float32le -> s16le (intermediate s16le)
( 37.342| 0.000) D: [pulseaudio] resampler.c: channels 1 -> 2 (resampling 1)
( 37.343| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 37.343| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 37.343| 0.000) I: [pulseaudio] sink-input.c: Created input 1 "AudioStream" on alsa_output.pci-0000_00_14.2.analog-stereo with sample spec float32le 1ch 48000Hz and channel map mono
( 37.343| 0.000) I: [pulseaudio] sink-input.c: media.name = "AudioStream"
( 37.343| 0.000) I: [pulseaudio] sink-input.c: application.name = "AudioStream"
( 37.343| 0.000) I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
( 37.343| 0.000) I: [pulseaudio] sink-input.c: native-protocol.version = "29"
( 37.343| 0.000) I: [pulseaudio] sink-input.c: application.process.id = "4321"
( 37.343| 0.000) I: [pulseaudio] sink-input.c: application.process.user = "david"
( 37.343| 0.000) I: [pulseaudio] sink-input.c: application.process.host = "fuileach"
( 37.343| 0.000) I: [pulseaudio] sink-input.c: application.process.binary = "iceweasel"
( 37.343| 0.000) I: [pulseaudio] sink-input.c: window.x11.display = ":0"
( 37.343| 0.000) I: [pulseaudio] sink-input.c: application.language = "ga_IE.UTF-8"
( 37.343| 0.000) I: [pulseaudio] sink-input.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 37.343| 0.000) I: [pulseaudio] sink-input.c: application.process.session_id = "1"
( 37.343| 0.000) I: [pulseaudio] sink-input.c: application.icon_name = "iceweasel"
( 37.343| 0.000) I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-application-name:AudioStream"
( 37.343| 0.000) I: [pulseaudio] protocol-native.c: Requested tlength=100.00 ms, minreq=25.00 ms
( 37.343| 0.000) D: [pulseaudio] protocol-native.c: Traditional mode enabled, modifying sink usec only for compat with minreq.
( 37.343| 0.000) D: [pulseaudio] protocol-native.c: Requested latency=50.00 ms, Received latency=100.14 ms
( 37.343| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=28828, base=4, prebuf=24032, minreq=4800 maxrewind=0
( 37.344| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=28828, base=4, prebuf=24032, minreq=4800 maxrewind=0
( 37.344| 0.000) I: [pulseaudio] protocol-native.c: Final latency 250.28 ms = 100.14 ms + 2*25.00 ms + 100.14 ms
( 37.344| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 47217 / 72% / -8.54 dB, front-right: 47217 / 72% / -8.54 dB
( 37.344| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 47477 / 72% / -8.40 dB, front-right: 47477 / 72% / -8.40 dB
( 37.344| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65177 / 99% / -0.14 dB, front-right: 65177 / 99% / -0.14 dB (accurate-enough=yes)
( 37.344| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 47217 at 3814787807
( 37.344| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 47217 at 3814784897 was dropped
( 37.344| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 37.344| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 37.345| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 50208 / 77% / -6.94 dB, front-right: 50208 / 77% / -6.94 dB
( 37.345| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 50483 / 77% / -6.80 dB, front-right: 50483 / 77% / -6.80 dB
( 37.345| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65179 / 99% / -0.14 dB, front-right: 65179 / 99% / -0.14 dB (accurate-enough=yes)
( 37.345| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 50208 at 3814788615
( 37.345| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 37.345| 0.000) D: [pulseaudio] protocol-native.c: Protocol version: remote 29, local 29
( 37.345| 0.000) I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
( 37.345| 0.000) D: [pulseaudio] protocol-native.c: SHM possible: yes
( 37.345| 0.000) D: [pulseaudio] protocol-native.c: Negotiated SHM: yes
( 37.345| 0.000) D: [alsa-sink-CX20756 Analog] protocol-native.c: Requesting rewind due to end of underrun.
( 37.346| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 37.346| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 49935 / 76% / -7.08 dB, front-right: 49935 / 76% / -7.08 dB
( 37.346| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 50097 / 76% / -7.00 dB, front-right: 50097 / 76% / -7.00 dB
( 37.346| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65324 / 100% / -0.08 dB, front-right: 65324 / 100% / -0.08 dB (accurate-enough=yes)
( 37.346| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 49935 at 3814790055
( 37.346| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 50208 at 3814788615 was dropped
( 37.346| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 37.347| 0.000) D: [pulseaudio] module-augment-properties.c: Looking for .desktop file for clementine
( 37.347| 0.000) D: [pulseaudio] module-augment-properties.c: Found /usr/share/applications/clementine.desktop.
( 37.347| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 37.348| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 45320 / 69% / -9.61 dB, front-right: 45320 / 69% / -9.61 dB
( 37.348| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 45340 / 69% / -9.60 dB, front-right: 45340 / 69% / -9.60 dB
( 37.348| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65507 / 100% / -0.01 dB, front-right: 65507 / 100% / -0.01 dB (accurate-enough=yes)
( 37.348| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 45320 at 3814791545
( 37.348| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 47217 at 3814787807 was dropped
( 37.348| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 49935 at 3814790055 was dropped
( 37.348| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 37.348| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 37.349| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 37870 / 58% / -14.29 dB, front-right: 37870 / 58% / -14.29 dB
( 37.349| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 38002 / 58% / -14.20 dB, front-right: 38002 / 58% / -14.20 dB
( 37.349| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65308 / 100% / -0.09 dB, front-right: 65308 / 100% / -0.09 dB (accurate-enough=yes)
( 37.349| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 37870 at 3814776818
( 37.349| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 45320 at 3814791545 was dropped
( 37.349| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 37870 at 3814776818 was written 8057 usec late
( 37.352| 0.003) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 39.357| 2.004) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 39.357| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 18729 / 29% / -32.64 dB, front-right: 18729 / 29% / -32.64 dB
( 39.358| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 18756 / 29% / -32.60 dB, front-right: 18756 / 29% / -32.60 dB
( 39.358| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65442 / 100% / -0.04 dB, front-right: 65442 / 100% / -0.04 dB (accurate-enough=yes)
( 39.358| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 18729 at 3816785565
( 39.358| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 18729 at 3816785565 was written 8058 usec late
( 39.358| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 41.368| 2.010) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Written HW volume did not match with the request: front-left: 18729 / 29% / -32.64 dB, front-right: 18729 / 29% / -32.64 dB (request) != front-left: 18471 / 28% / -33.00 dB, front-right: 18471 / 28% / -33.00 dB
( 41.369| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-application-name:Clementine.
( 41.369| 0.000) D: [pulseaudio] module-intended-roles.c: Not setting device for stream pulsesink probe, because already set.
( 41.369| 0.000) D: [pulseaudio] sink-input.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.channels = "2" format.rate = "44100" format.channel_map = "\"front-left,front-right\""
( 41.369| 0.000) I: [pulseaudio] sink-input.c: Trying to change sample rate
( 41.369| 0.000) D: [pulseaudio] sink.c: Suspending sink alsa_output.pci-0000_00_14.2.analog-stereo due to changing the sample rate.
( 41.369| 0.000) D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_14.2.analog-stereo is 0x0020, suspending
( 41.371| 0.002) I: [alsa-sink-CX20756 Analog] alsa-sink.c: Device suspended...
( 41.372| 0.000) I: [pulseaudio] alsa-sink.c: Updating rate for device front:1, new rate is 44100
( 41.372| 0.000) D: [pulseaudio] source.c: Suspending source alsa_output.pci-0000_00_14.2.analog-stereo.monitor due to changing the sample rate.
( 41.372| 0.000) I: [pulseaudio] source.c: Changed sampling rate successfully
( 41.372| 0.000) I: [pulseaudio] sink.c: Changed sampling rate successfully
( 41.372| 0.000) D: [pulseaudio] resampler.c: Channel matrix:
( 41.372| 0.000) D: [pulseaudio] resampler.c: I00
( 41.372| 0.000) D: [pulseaudio] resampler.c: +------
( 41.372| 0.000) D: [pulseaudio] resampler.c: O00 | 1.000
( 41.372| 0.000) D: [pulseaudio] resampler.c: O01 | 1.000
( 41.372| 0.000) I: [pulseaudio] remap_sse.c: Using SSE2 mono to stereo remapping
( 41.372| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 41.372| 0.000) D: [pulseaudio] resampler.c: rate 48000 -> 44100 (method speex-float-1)
( 41.372| 0.000) D: [pulseaudio] resampler.c: format float32le -> s16le (intermediate float32le)
( 41.372| 0.000) D: [pulseaudio] resampler.c: channels 1 -> 2 (resampling 1)
( 41.372| 0.000) I: [pulseaudio] resampler.c: Choosing speex quality setting 1.
( 41.372| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 41.372| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 41.372| 0.000) D: [pulseaudio] sink-input.c: Updated resampler for sink input 1
( 41.372| 0.000) D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_14.2.analog-stereo is 0x0000, resuming
( 41.374| 0.001) D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio1'
( 41.374| 0.000) I: [alsa-sink-CX20756 Analog] alsa-sink.c: Trying resume...
( 41.375| 0.001) D: [alsa-sink-CX20756 Analog] alsa-util.c: Maximum hw buffer size is 371 ms
( 45.404| 4.029) D: [alsa-sink-CX20756 Analog] alsa-util.c: Set buffer size first (to 4416 samples), period size second (to 736 samples).
( 45.405| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: hwbuf_unused=0
( 45.405| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: setting avail_min=1
( 45.405| 0.000) I: [alsa-sink-CX20756 Analog] alsa-sink.c: Resumed successfully...
( 45.405| 0.000) I: [alsa-sink-CX20756 Analog] alsa-sink.c: Starting playback.
( 45.405| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 45.405| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 45.405| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 45.405| 0.000) I: [pulseaudio] sink-input.c: Rate changed to 44100 Hz
( 45.405| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring volume for sink input sink-input-by-application-name:Clementine.
( 45.405| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for sink input sink-input-by-application-name:Clementine.
( 45.405| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 45.405| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 45.405| 0.000) I: [pulseaudio] resampler.c: Forcing resampler 'copy', because of fixed, identical sample rates.
( 45.405| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 45.405| 0.000) D: [pulseaudio] resampler.c: rate 44100 -> 44100 (method copy)
( 45.405| 0.000) D: [pulseaudio] resampler.c: format float32le -> s16le (intermediate s16le)
( 45.405| 0.000) D: [pulseaudio] resampler.c: channels 2 -> 2 (resampling 2)
( 45.405| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 45.405| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 45.405| 0.000) I: [pulseaudio] sink-input.c: Created input 2 "pulsesink probe" on alsa_output.pci-0000_00_14.2.analog-stereo with sample spec float32le 2ch 44100Hz and channel map front-left,front-right
( 45.405| 0.000) I: [pulseaudio] sink-input.c: media.name = "pulsesink probe"
( 45.405| 0.000) I: [pulseaudio] sink-input.c: application.name = "Clementine"
( 45.405| 0.000) I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
( 45.405| 0.000) I: [pulseaudio] sink-input.c: native-protocol.version = "29"
( 45.405| 0.000) I: [pulseaudio] sink-input.c: application.process.id = "2839"
( 45.405| 0.000) I: [pulseaudio] sink-input.c: application.process.user = "david"
( 45.405| 0.000) I: [pulseaudio] sink-input.c: application.process.host = "fuileach"
( 45.405| 0.000) I: [pulseaudio] sink-input.c: application.process.binary = "clementine"
( 45.405| 0.000) I: [pulseaudio] sink-input.c: application.language = "ga_IE.UTF-8"
( 45.405| 0.000) I: [pulseaudio] sink-input.c: window.x11.display = ":0"
( 45.405| 0.000) I: [pulseaudio] sink-input.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 45.405| 0.000) I: [pulseaudio] sink-input.c: application.process.session_id = "1"
( 45.405| 0.000) I: [pulseaudio] sink-input.c: application.icon_name = "application-x-clementine"
( 45.405| 0.000) I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-application-name:Clementine"
( 45.406| 0.000) I: [pulseaudio] protocol-native.c: Requested tlength=136.05 ms, minreq=20.00 ms
( 45.406| 0.000) D: [pulseaudio] protocol-native.c: Adjust latency mode enabled, configuring sink latency to half of overall latency.
( 45.406| 0.000) D: [pulseaudio] protocol-native.c: Requested latency=48.03 ms, Received latency=100.14 ms
( 45.406| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=49440, base=8, prebuf=42392, minreq=7056 maxrewind=0
( 45.406| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=49440, base=8, prebuf=42392, minreq=7056 maxrewind=0
( 45.406| 0.000) I: [pulseaudio] protocol-native.c: Final latency 240.27 ms = 100.14 ms + 2*20.00 ms + 100.14 ms
( 45.406| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 18729 / 29% / -32.64 dB, front-right: 18729 / 29% / -32.64 dB
( 45.406| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 18756 / 29% / -32.60 dB, front-right: 18756 / 29% / -32.60 dB
( 45.406| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65442 / 100% / -0.04 dB, front-right: 65442 / 100% / -0.04 dB (accurate-enough=yes)
( 45.406| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume not changing
( 45.407| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 45.407| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 45.407| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 45.407| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 6754 / 10% / -59.22 dB, front-right: 6754 / 10% / -59.22 dB
( 45.407| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 6758 / 10% / -59.20 dB, front-right: 6758 / 10% / -59.20 dB
( 45.407| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65497 / 100% / -0.02 dB, front-right: 65497 / 100% / -0.02 dB (accurate-enough=yes)
( 45.407| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 6754 at 3822935132
( 45.407| 0.000) D: [alsa-sink-CX20756 Analog] ratelimit.c: 153 events suppressed
( 45.407| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 92006 usec
( 45.407| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 91953 usec
( 45.412| 0.005) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 45.413| 0.000) I: [pulseaudio] module-device-restore.c: Synced.
( 45.413| 0.000) D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC1 is accessible: yes
( 45.413| 0.000) D: [pulseaudio] module-udev-detect.c: Resuming all sinks and sources of card alsa_card.pci-0000_00_14.2.
( 45.413| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 86304 usec
( 45.413| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 86192 usec
( 45.413| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 86155 usec
( 45.413| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 86113 usec
( 45.413| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 86086 usec
( 45.413| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 86038 usec
( 45.413| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 86011 usec
( 45.413| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 85972 usec
( 45.413| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 85945 usec
( 45.413| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 45.413| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 6318 / 10% / -60.95 dB, front-right: 6318 / 10% / -60.95 dB
( 45.413| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 6356 / 10% / -60.80 dB, front-right: 6356 / 10% / -60.80 dB
( 45.413| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65144 / 99% / -0.16 dB, front-right: 65144 / 99% / -0.16 dB (accurate-enough=yes)
( 45.414| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 6318 at 3822941413
( 45.414| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 45.414| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 6318 / 10% / -60.95 dB, front-right: 6318 / 10% / -60.95 dB
( 45.414| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 6356 / 10% / -60.80 dB, front-right: 6356 / 10% / -60.80 dB
( 45.414| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65144 / 99% / -0.16 dB, front-right: 65144 / 99% / -0.16 dB (accurate-enough=yes)
( 45.414| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 6318 at 3822941821
( 45.414| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 45.414| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 45.414| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 17376 bytes.
( 45.414| 0.000) I: [pulseaudio] sink-input.c: Freeing input 2 "pulsesink probe"
( 45.414| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 4344
( 45.414| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 4344
( 45.414| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 17376 bytes.
( 45.414| 0.000) D: [pulseaudio] sink.c: Suspending sink alsa_output.pci-0000_00_14.2.analog-stereo due to changing the sample rate.
( 45.414| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 45.414| 0.000) D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_14.2.analog-stereo is 0x0020, suspending
( 45.414| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 1306
( 45.414| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 6754 at 3822843337 was written 6695 usec late
( 45.414| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 6318 at 3822843337 was written 6695 usec late
( 47.424| 2.010) D: [alsa-sink-CX20756 Analog] sink-input.c: Have to rewind 17376 bytes on render memblockq.
( 47.424| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 47.425| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 6318 at 3822859337 was written 2001233 usec late
( 47.425| 0.000) I: [alsa-sink-CX20756 Analog] alsa-sink.c: Device suspended...
( 47.425| 0.000) I: [pulseaudio] alsa-sink.c: Updating rate for device front:1, new rate is 48000
( 47.425| 0.000) D: [pulseaudio] source.c: Suspending source alsa_output.pci-0000_00_14.2.analog-stereo.monitor due to changing the sample rate.
( 47.425| 0.000) I: [pulseaudio] source.c: Changed sampling rate successfully
( 47.425| 0.000) I: [pulseaudio] sink.c: Changed sampling rate successfully
( 47.425| 0.000) I: [pulseaudio] resampler.c: Forcing resampler 'copy', because of fixed, identical sample rates.
( 47.425| 0.000) D: [pulseaudio] resampler.c: Channel matrix:
( 47.425| 0.000) D: [pulseaudio] resampler.c: I00
( 47.425| 0.000) D: [pulseaudio] resampler.c: +------
( 47.425| 0.000) D: [pulseaudio] resampler.c: O00 | 1.000
( 47.425| 0.000) D: [pulseaudio] resampler.c: O01 | 1.000
( 47.425| 0.000) I: [pulseaudio] remap_sse.c: Using SSE2 mono to stereo remapping
( 47.425| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 47.426| 0.000) D: [pulseaudio] resampler.c: rate 48000 -> 48000 (method copy)
( 47.426| 0.000) D: [pulseaudio] resampler.c: format float32le -> s16le (intermediate s16le)
( 47.426| 0.000) D: [pulseaudio] resampler.c: channels 1 -> 2 (resampling 1)
( 47.426| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 47.426| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 47.426| 0.000) D: [pulseaudio] sink-input.c: Updated resampler for sink input 1
( 47.426| 0.000) D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_14.2.analog-stereo is 0x0000, resuming
( 47.427| 0.000) D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio1'
( 47.427| 0.000) I: [alsa-sink-CX20756 Analog] alsa-sink.c: Trying resume...
( 47.428| 0.001) D: [alsa-sink-CX20756 Analog] alsa-util.c: Maximum hw buffer size is 341 ms
( 51.468| 4.040) D: [alsa-sink-CX20756 Analog] alsa-util.c: Set buffer size first (to 4416 samples), period size second (to 736 samples).
( 51.468| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: hwbuf_unused=0
( 51.468| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: setting avail_min=1
( 51.469| 0.000) I: [alsa-sink-CX20756 Analog] alsa-sink.c: Resumed successfully...
( 51.469| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 51.469| 0.000) I: [alsa-sink-CX20756 Analog] alsa-sink.c: Starting playback.
( 51.469| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 51.469| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 51.469| 0.000) D: [alsa-sink-CX20756 Analog] protocol-native.c: Requesting rewind due to end of underrun.
( 51.469| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Requesting rewind due to uncorking
( 51.469| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 51.469| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 51.469| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 17372 bytes.
( 51.469| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 4343
( 51.469| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 4343
( 51.470| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 17372 bytes.
( 51.470| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 51.470| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 1091
( 51.470| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 51.470| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 51.472| 0.001) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 51.472| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 51.472| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 51.473| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 7436 / 11% / -56.71 dB, front-right: 7436 / 11% / -56.71 dB
( 51.473| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 7467 / 11% / -56.60 dB, front-right: 7467 / 11% / -56.60 dB
( 51.473| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65264 / 100% / -0.11 dB, front-right: 65264 / 100% / -0.11 dB (accurate-enough=yes)
( 51.473| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 7436 at 3829008316
( 51.473| 0.000) D: [alsa-sink-CX20756 Analog] ratelimit.c: 9 events suppressed
( 51.473| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 99594 usec
( 51.473| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 99038 usec
( 51.475| 0.001) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 51.476| 0.000) D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC1 is accessible: yes
( 51.476| 0.000) D: [pulseaudio] module-udev-detect.c: Resuming all sinks and sources of card alsa_card.pci-0000_00_14.2.
( 51.476| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-application-name:Clementine.
( 51.476| 0.000) D: [pulseaudio] module-intended-roles.c: Not setting device for stream pulsesink probe, because already set.
( 51.476| 0.000) D: [pulseaudio] sink-input.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.channels = "2" format.rate = "44100" format.channel_map = "\"front-left,front-right\""
( 51.476| 0.000) I: [pulseaudio] sink-input.c: Trying to change sample rate
( 51.476| 0.000) I: [pulseaudio] sink.c: Cannot update rate, SINK_IS_RUNNING, will keep using 48000 Hz
( 51.476| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring volume for sink input sink-input-by-application-name:Clementine.
( 51.476| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for sink input sink-input-by-application-name:Clementine.
( 51.477| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 51.477| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 51.477| 0.000) D: [pulseaudio] resampler.c: rate 44100 -> 48000 (method speex-float-1)
( 51.477| 0.000) D: [pulseaudio] resampler.c: format float32le -> s16le (intermediate float32le)
( 51.477| 0.000) D: [pulseaudio] resampler.c: channels 2 -> 2 (resampling 2)
( 51.477| 0.000) I: [pulseaudio] resampler.c: Choosing speex quality setting 1.
( 51.477| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 51.477| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 51.477| 0.000) I: [pulseaudio] sink-input.c: Created input 3 "pulsesink probe" on alsa_output.pci-0000_00_14.2.analog-stereo with sample spec float32le 2ch 44100Hz and channel map front-left,front-right
( 51.477| 0.000) I: [pulseaudio] sink-input.c: media.name = "pulsesink probe"
( 51.477| 0.000) I: [pulseaudio] sink-input.c: application.name = "Clementine"
( 51.477| 0.000) I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
( 51.477| 0.000) I: [pulseaudio] sink-input.c: native-protocol.version = "29"
( 51.477| 0.000) I: [pulseaudio] sink-input.c: application.process.id = "2839"
( 51.477| 0.000) I: [pulseaudio] sink-input.c: application.process.user = "david"
( 51.477| 0.000) I: [pulseaudio] sink-input.c: application.process.host = "fuileach"
( 51.477| 0.000) I: [pulseaudio] sink-input.c: application.process.binary = "clementine"
( 51.477| 0.000) I: [pulseaudio] sink-input.c: application.language = "ga_IE.UTF-8"
( 51.477| 0.000) I: [pulseaudio] sink-input.c: window.x11.display = ":0"
( 51.477| 0.000) I: [pulseaudio] sink-input.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 51.477| 0.000) I: [pulseaudio] sink-input.c: application.process.session_id = "1"
( 51.477| 0.000) I: [pulseaudio] sink-input.c: application.icon_name = "application-x-clementine"
( 51.477| 0.000) I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-application-name:Clementine"
( 51.478| 0.000) I: [pulseaudio] protocol-native.c: Requested tlength=136.05 ms, minreq=20.00 ms
( 51.478| 0.000) D: [pulseaudio] protocol-native.c: Adjust latency mode enabled, configuring sink latency to half of overall latency.
( 51.478| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 94550 usec
( 51.478| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 93968 usec
( 51.479| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 93900 usec
( 51.479| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 93414 usec
( 51.479| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 93348 usec
( 51.479| 0.000) D: [pulseaudio] protocol-native.c: Requested latency=48.03 ms, Received latency=100.14 ms
( 51.479| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=49440, base=8, prebuf=42392, minreq=7056 maxrewind=0
( 51.479| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=49440, base=8, prebuf=42392, minreq=7056 maxrewind=0
( 51.479| 0.000) I: [pulseaudio] protocol-native.c: Final latency 240.27 ms = 100.14 ms + 2*20.00 ms + 100.14 ms
( 51.480| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 92877 usec
( 51.480| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 7436 / 11% / -56.71 dB, front-right: 7436 / 11% / -56.71 dB
( 51.480| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 7467 / 11% / -56.60 dB, front-right: 7467 / 11% / -56.60 dB
( 51.480| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65264 / 100% / -0.11 dB, front-right: 65264 / 100% / -0.11 dB (accurate-enough=yes)
( 51.480| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 7436 at 3829015379
( 51.480| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 7436 at 3829008316 was dropped
( 51.480| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 99521 usec
( 51.481| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 98964 usec
( 51.481| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 98899 usec
( 51.481| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 51.481| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 51.482| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 16274 / 25% / -36.30 dB, front-right: 16274 / 25% / -36.30 dB
( 51.482| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 16336 / 25% / -36.20 dB, front-right: 16336 / 25% / -36.20 dB
( 51.482| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65287 / 100% / -0.10 dB, front-right: 65287 / 100% / -0.10 dB (accurate-enough=yes)
( 51.482| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 16274 at 3829017586
( 51.482| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 51.483| 0.001) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 51.483| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 27212 / 42% / -22.90 dB, front-right: 27212 / 42% / -22.90 dB
( 51.483| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 27320 / 42% / -22.80 dB, front-right: 27320 / 42% / -22.80 dB
( 51.484| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65277 / 100% / -0.10 dB, front-right: 65277 / 100% / -0.10 dB (accurate-enough=yes)
( 51.484| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 27212 at 3829019273
( 51.484| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 51.484| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 27212 / 42% / -22.90 dB, front-right: 27212 / 42% / -22.90 dB
( 51.484| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 27320 / 42% / -22.80 dB, front-right: 27320 / 42% / -22.80 dB
( 51.484| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65277 / 100% / -0.10 dB, front-right: 65277 / 100% / -0.10 dB (accurate-enough=yes)
( 51.484| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 27212 at 3829019774
( 51.484| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 27212 at 3829019273 was dropped
( 51.484| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 51.484| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 17348 bytes.
( 51.484| 0.000) I: [pulseaudio] sink-input.c: Freeing input 3 "pulsesink probe"
( 51.484| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 4337
( 51.484| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 4337
( 51.484| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 17348 bytes.
( 51.484| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 51.484| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 1191
( 51.484| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Have to rewind 17348 bytes on render memblockq.
( 51.484| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 51.486| 0.001) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 51.486| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 43619 / 67% / -10.61 dB, front-right: 43619 / 67% / -10.61 dB
( 51.486| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 43633 / 67% / -10.60 dB, front-right: 43633 / 67% / -10.60 dB
( 51.486| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65515 / 100% / -0.01 dB, front-right: 65515 / 100% / -0.01 dB (accurate-enough=yes)
( 51.486| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 43619 at 3829022003
( 51.486| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 51.488| 0.001) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 51.488| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 46038 / 70% / -9.20 dB, front-right: 46038 / 70% / -9.20 dB
( 51.488| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 46041 / 70% / -9.20 dB, front-right: 46041 / 70% / -9.20 dB
( 51.488| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65532 / 100% / -0.00 dB, front-right: 65532 / 100% / -0.00 dB (accurate-enough=yes)
( 51.488| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 46038 at 3829023629
( 51.488| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 51.488| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-application-name:Clementine.
( 51.488| 0.000) D: [pulseaudio] module-intended-roles.c: Not setting device for stream Playback Stream, because already set.
( 51.489| 0.000) D: [pulseaudio] sink-input.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.channels = "2" format.rate = "44100" format.channel_map = "\"front-left,front-right\""
( 51.489| 0.000) I: [pulseaudio] sink-input.c: Trying to change sample rate
( 51.489| 0.000) I: [pulseaudio] sink.c: Cannot update rate, SINK_IS_RUNNING, will keep using 48000 Hz
( 51.489| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring volume for sink input sink-input-by-application-name:Clementine.
( 51.489| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for sink input sink-input-by-application-name:Clementine.
( 51.489| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 51.489| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 51.489| 0.000) D: [pulseaudio] resampler.c: rate 44100 -> 48000 (method speex-float-1)
( 51.489| 0.000) D: [pulseaudio] resampler.c: format float32le -> s16le (intermediate float32le)
( 51.489| 0.000) D: [pulseaudio] resampler.c: channels 2 -> 2 (resampling 2)
( 51.489| 0.000) I: [pulseaudio] resampler.c: Choosing speex quality setting 1.
( 51.489| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 51.489| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 51.489| 0.000) I: [pulseaudio] sink-input.c: Created input 4 "Playback Stream" on alsa_output.pci-0000_00_14.2.analog-stereo with sample spec float32le 2ch 44100Hz and channel map front-left,front-right
( 51.489| 0.000) I: [pulseaudio] sink-input.c: media.name = "Playback Stream"
( 51.489| 0.000) I: [pulseaudio] sink-input.c: application.name = "Clementine"
( 51.489| 0.000) I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
( 51.489| 0.000) I: [pulseaudio] sink-input.c: native-protocol.version = "29"
( 51.489| 0.000) I: [pulseaudio] sink-input.c: application.process.id = "2839"
( 51.489| 0.000) I: [pulseaudio] sink-input.c: application.process.user = "david"
( 51.489| 0.000) I: [pulseaudio] sink-input.c: application.process.host = "fuileach"
( 51.489| 0.000) I: [pulseaudio] sink-input.c: application.process.binary = "clementine"
( 51.489| 0.000) I: [pulseaudio] sink-input.c: application.language = "ga_IE.UTF-8"
( 51.489| 0.000) I: [pulseaudio] sink-input.c: window.x11.display = ":0"
( 51.489| 0.000) I: [pulseaudio] sink-input.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 51.489| 0.000) I: [pulseaudio] sink-input.c: application.process.session_id = "1"
( 51.489| 0.000) I: [pulseaudio] sink-input.c: application.icon_name = "application-x-clementine"
( 51.489| 0.000) I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-application-name:Clementine"
( 51.489| 0.000) I: [pulseaudio] protocol-native.c: Requested tlength=200.00 ms, minreq=10.00 ms
( 51.489| 0.000) D: [pulseaudio] protocol-native.c: Adjust latency mode enabled, configuring sink latency to half of overall latency.
( 51.490| 0.000) D: [pulseaudio] protocol-native.c: Requested latency=90.00 ms, Received latency=100.14 ms
( 51.490| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=42384, base=8, prebuf=0, minreq=3528 maxrewind=0
( 51.490| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=42384, base=8, prebuf=0, minreq=3528 maxrewind=0
( 51.490| 0.000) I: [pulseaudio] protocol-native.c: Final latency 220.27 ms = 100.14 ms + 2*10.00 ms + 100.14 ms
( 51.490| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 46038 / 70% / -9.20 dB, front-right: 46038 / 70% / -9.20 dB
( 51.490| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 46041 / 70% / -9.20 dB, front-right: 46041 / 70% / -9.20 dB
( 51.490| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65532 / 100% / -0.00 dB, front-right: 65532 / 100% / -0.00 dB (accurate-enough=yes)
( 51.490| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 46038 at 3829026108
( 51.490| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 46038 at 3829023629 was dropped
( 51.491| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 51.491| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 51.491| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 42096 / 64% / -11.53 dB, front-right: 42096 / 64% / -11.53 dB
( 51.491| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 42314 / 65% / -11.40 dB, front-right: 42314 / 65% / -11.40 dB
( 51.491| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65198 / 99% / -0.13 dB, front-right: 65198 / 99% / -0.13 dB (accurate-enough=yes)
( 51.491| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 42096 at 3829026857
( 51.491| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 43619 at 3829022003 was dropped
( 51.491| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 46038 at 3829026108 was dropped
( 51.491| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 51.492| 0.001) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 51.493| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 24678 / 38% / -25.45 dB, front-right: 24678 / 38% / -25.45 dB
( 51.493| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 24726 / 38% / -25.40 dB, front-right: 24726 / 38% / -25.40 dB
( 51.493| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65409 / 100% / -0.05 dB, front-right: 65409 / 100% / -0.05 dB (accurate-enough=yes)
( 51.493| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 24678 at 3829012439
( 51.493| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 42096 at 3829026857 was dropped
( 51.493| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 51.493| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 51.493| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 51.494| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 7436 at 3828929437 was written 89 usec late
( 51.494| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 16274 at 3828929437 was written 89 usec late
( 51.494| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 27212 at 3828929437 was written 89 usec late
( 53.500| 2.006) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 19251 / 29% / -31.92 dB, front-right: 19251 / 29% / -31.92 dB
( 53.501| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 19341 / 30% / -31.80 dB, front-right: 19341 / 30% / -31.80 dB
( 53.501| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65231 / 100% / -0.12 dB, front-right: 65231 / 100% / -0.12 dB (accurate-enough=yes)
( 53.501| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 19251 at 3830928576
( 53.501| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 24678 at 3829012439 was written 1924197 usec late
( 53.501| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 19251 at 3830928576 was written 8060 usec late
( 53.501| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 55.512| 2.011) I: [pulseaudio] client.c: Created 6 "Native client (UNIX socket client)"
( 55.512| 0.000) D: [alsa-sink-CX20756 Analog] protocol-native.c: Implicit underrun of 'AudioStream'
( 55.513| 0.000) I: [pulseaudio] module-device-restore.c: Synced.
( 55.513| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 5388 bytes ago (12272 bytes ahead in playback buffer)
( 55.513| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 5468 bytes ago (12192 bytes ahead in playback buffer)
( 55.514| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 5552 bytes ago (12104 bytes ahead in playback buffer)
( 55.514| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 55.514| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 55.514| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 5668 bytes ago (11988 bytes ahead in playback buffer)
( 55.515| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 23843 / 36% / -26.35 dB, front-right: 23843 / 36% / -26.35 dB
( 55.515| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 23978 / 37% / -26.20 dB, front-right: 23978 / 37% / -26.20 dB
( 55.515| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65167 / 99% / -0.15 dB, front-right: 65167 / 99% / -0.15 dB (accurate-enough=yes)
( 55.515| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 23843 at 3832958682
( 55.515| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 55.515| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 5820 bytes ago (11840 bytes ahead in playback buffer)
( 55.515| 0.000) D: [pulseaudio] protocol-native.c: Protocol version: remote 29, local 29
( 55.516| 0.000) I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
( 55.516| 0.000) D: [pulseaudio] protocol-native.c: SHM possible: yes
( 55.516| 0.000) D: [pulseaudio] protocol-native.c: Negotiated SHM: yes
( 55.516| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 5924 bytes ago (11736 bytes ahead in playback buffer)
( 55.516| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 6016 bytes ago (11644 bytes ahead in playback buffer)
( 55.517| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 55.517| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 55.517| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 6096 bytes ago (11564 bytes ahead in playback buffer)
( 55.517| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 40750 / 62% / -12.38 dB, front-right: 40750 / 62% / -12.38 dB
( 55.517| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 41034 / 63% / -12.20 dB, front-right: 41034 / 63% / -12.20 dB
( 55.517| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65082 / 99% / -0.18 dB, front-right: 65082 / 99% / -0.18 dB (accurate-enough=yes)
( 55.517| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 40750 at 3832960856
( 55.517| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 55.517| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 6236 bytes ago (11420 bytes ahead in playback buffer)
( 55.517| 0.000) D: [pulseaudio] module-augment-properties.c: Looking for .desktop file for pavucontrol
( 55.518| 0.000) D: [pulseaudio] module-augment-properties.c: Found /usr/share/applications/pavucontrol.desktop.
( 55.519| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 6452 bytes ago (11204 bytes ahead in playback buffer)
( 55.519| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 6540 bytes ago (11120 bytes ahead in playback buffer)
( 55.519| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 6620 bytes ago (11040 bytes ahead in playback buffer)
( 55.520| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 55.520| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 55.520| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 6696 bytes ago (10960 bytes ahead in playback buffer)
( 55.520| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 41269 / 63% / -12.05 dB, front-right: 41269 / 63% / -12.05 dB
( 55.520| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 41350 / 63% / -12.00 dB, front-right: 41350 / 63% / -12.00 dB
( 55.520| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65408 / 100% / -0.05 dB, front-right: 65408 / 100% / -0.05 dB (accurate-enough=yes)
( 55.520| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 41269 at 3832963977
( 55.520| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 55.520| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 6832 bytes ago (10824 bytes ahead in playback buffer)
( 55.521| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 6916 bytes ago (10744 bytes ahead in playback buffer)
( 55.521| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 55.521| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 6992 bytes ago (10664 bytes ahead in playback buffer)
( 55.521| 0.000) D: [alsa-sink-CX20756 Analog] protocol-native.c: Requesting rewind due to end of underrun.
( 55.521| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 6992 bytes.
( 55.522| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 6992 bytes.
( 55.522| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 1748
( 55.522| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 1748
( 55.522| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 6992 bytes.
( 55.522| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 55.522| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 0
( 55.522| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Have to rewind 6992 bytes on render memblockq.
( 55.522| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Have to rewind 6992 bytes on render memblockq.
( 55.522| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 55.523| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 23843 at 3832958682 was written 160 usec late
( 57.528| 2.005) D: [alsa-sink-CX20756 Analog] ratelimit.c: 243 events suppressed
( 57.529| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 2014 usec
( 57.529| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 36122 / 55% / -15.52 dB, front-right: 36122 / 55% / -15.52 dB
( 57.529| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 36293 / 55% / -15.40 dB, front-right: 36293 / 55% / -15.40 dB
( 57.529| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65227 / 100% / -0.12 dB, front-right: 65227 / 100% / -0.12 dB (accurate-enough=yes)
( 57.529| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 36122 at 3834956835
( 57.529| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 40750 at 3832960856 was written 2004047 usec late
( 57.529| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 41269 at 3832963977 was written 2000926 usec late
( 57.529| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 36122 at 3834956835 was written 8068 usec late
( 57.529| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 59.536| 2.007) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Written HW volume did not match with the request: front-left: 36122 / 55% / -15.52 dB, front-right: 36122 / 55% / -15.52 dB (request) != front-left: 35466 / 54% / -16.00 dB, front-right: 35466 / 54% / -16.00 dB
( 59.538| 0.001) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 59.539| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 26552 / 41% / -23.54 dB, front-right: 26552 / 41% / -23.54 dB
( 59.539| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 26698 / 41% / -23.40 dB, front-right: 26698 / 41% / -23.40 dB
( 59.539| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65178 / 99% / -0.14 dB, front-right: 65178 / 99% / -0.14 dB (accurate-enough=yes)
( 59.539| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 26552 at 3836966676
( 59.539| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 26552 at 3836966676 was written 8063 usec late
( 59.539| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 61.544| 2.005) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Written HW volume did not match with the request: front-left: 26552 / 41% / -23.54 dB, front-right: 26552 / 41% / -23.54 dB (request) != front-left: 26090 / 40% / -24.00 dB, front-right: 26090 / 40% / -24.00 dB
( 61.545| 0.000) D: [alsa-sink-CX20756 Analog] protocol-native.c: Implicit underrun of 'AudioStream'
( 61.545| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 4260 bytes ago (13404 bytes ahead in playback buffer)
( 61.545| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 4276 bytes ago (13388 bytes ahead in playback buffer)
( 61.545| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 4288 bytes ago (13376 bytes ahead in playback buffer)
( 61.545| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 4304 bytes ago (13360 bytes ahead in playback buffer)
( 61.545| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 61.546| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 4336 bytes ago (13328 bytes ahead in playback buffer)
( 61.546| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 15887 / 24% / -36.93 dB, front-right: 15887 / 24% / -36.93 dB
( 61.546| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 15964 / 24% / -36.80 dB, front-right: 15964 / 24% / -36.80 dB
( 61.546| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65220 / 100% / -0.13 dB, front-right: 65220 / 100% / -0.13 dB (accurate-enough=yes)
( 61.546| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 15887 at 3838973680
( 61.546| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 15887 at 3838973680 was written 8026 usec late
( 61.546| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 63.557| 2.010) D: [alsa-sink-CX20756 Analog] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 63.558| 0.001) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 63.559| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 8715 / 13% / -52.57 dB, front-right: 8715 / 13% / -52.57 dB
( 63.559| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 8773 / 13% / -52.40 dB, front-right: 8773 / 13% / -52.40 dB
( 63.559| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65103 / 99% / -0.17 dB, front-right: 65103 / 99% / -0.17 dB (accurate-enough=yes)
( 63.559| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 8715 at 3840986725
( 63.559| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 8715 at 3840986725 was written 8057 usec late
( 63.559| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 65.568| 2.009) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Written HW volume did not match with the request: front-left: 8715 / 13% / -52.57 dB, front-right: 8715 / 13% / -52.57 dB (request) != front-left: 8573 / 13% / -53.00 dB, front-right: 8573 / 13% / -53.00 dB
( 65.569| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 65.569| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 9658 / 15% / -49.90 dB, front-right: 9658 / 15% / -49.90 dB
( 65.569| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 9694 / 15% / -49.80 dB, front-right: 9694 / 15% / -49.80 dB
( 65.570| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65293 / 100% / -0.10 dB, front-right: 65293 / 100% / -0.10 dB (accurate-enough=yes)
( 65.570| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 9658 at 3843013517
( 65.570| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 7942 usec
( 65.570| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 65.570| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 7654 usec
( 65.570| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 7587 usec
( 65.570| 0.000) I: [pulseaudio] module-device-restore.c: Synced.
( 65.570| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 7304 usec
( 65.570| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 7243 usec
( 65.571| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 6955 usec
( 65.571| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 6790 usec
( 65.571| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 6498 usec
( 65.571| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 6437 usec
( 65.571| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 6158 usec
( 65.572| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 65.573| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 15050 / 23% / -38.34 dB, front-right: 15050 / 23% / -38.34 dB
( 65.573| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 15129 / 23% / -38.20 dB, front-right: 15129 / 23% / -38.20 dB
( 65.573| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65194 / 99% / -0.14 dB, front-right: 65194 / 99% / -0.14 dB (accurate-enough=yes)
( 65.573| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 15050 at 3843016689
( 65.573| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 65.574| 0.001) D: [alsa-sink-CX20756 Analog] protocol-native.c: Requesting rewind due to end of underrun.
( 65.575| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 65.575| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 20318 / 31% / -30.52 dB, front-right: 20318 / 31% / -30.52 dB
( 65.575| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 20408 / 31% / -30.40 dB, front-right: 20408 / 31% / -30.40 dB
( 65.575| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65247 / 100% / -0.12 dB, front-right: 65247 / 100% / -0.12 dB (accurate-enough=yes)
( 65.575| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 20318 at 3843018816
( 65.575| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 65.576| 0.001) D: [alsa-sink-CX20756 Analog] protocol-native.c: Requesting rewind due to end of underrun.
( 65.577| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 65.577| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 20785 / 32% / -29.92 dB, front-right: 20785 / 32% / -29.92 dB
( 65.577| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 20884 / 32% / -29.80 dB, front-right: 20884 / 32% / -29.80 dB
( 65.577| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65225 / 100% / -0.12 dB, front-right: 65225 / 100% / -0.12 dB (accurate-enough=yes)
( 65.577| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 20785 at 3843021410
( 65.578| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 65.578| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 9658 at 3843013517 was written 193 usec late
( 67.588| 2.010) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 15050 at 3843016689 was written 2007614 usec late
( 67.589| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 20318 at 3843018816 was written 2005487 usec late
( 67.589| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 67.589| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 20785 at 3843021410 was written 2002893 usec late
( 69.601| 2.011) D: [alsa-sink-CX20756 Analog] protocol-native.c: Requesting rewind due to end of underrun.
( 69.601| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 69.601| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 17368 bytes.
( 69.601| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 4342
( 69.601| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 4342
( 69.601| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 17368 bytes.
( 69.601| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 69.601| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 0
( 69.601| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Have to rewind 17368 bytes on render memblockq.
( 69.601| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Have to rewind 17368 bytes on render memblockq.
( 69.601| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 69.602| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 20210 / 31% / -30.65 dB, front-right: 20210 / 31% / -30.65 dB
( 69.602| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 20252 / 31% / -30.60 dB, front-right: 20252 / 31% / -30.60 dB
( 69.602| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65400 / 100% / -0.05 dB, front-right: 65400 / 100% / -0.05 dB (accurate-enough=yes)
( 69.602| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 20210 at 3847029597
( 69.602| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 20210 at 3847029597 was written 8052 usec late
( 69.602| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 71.612| 2.010) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Written HW volume did not match with the request: front-left: 20210 / 31% / -30.65 dB, front-right: 20210 / 31% / -30.65 dB (request) != front-left: 19944 / 30% / -31.00 dB, front-right: 19944 / 30% / -31.00 dB
( 71.613| 0.000) D: [alsa-sink-CX20756 Analog] protocol-native.c: Implicit underrun of 'AudioStream'
( 71.613| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 4000 bytes ago (13660 bytes ahead in playback buffer)
( 71.613| 0.000) D: [alsa-sink-CX20756 Analog] protocol-native.c: Requesting rewind due to end of underrun.
( 71.613| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Requesting rewind due to uncorking
( 71.613| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 71.613| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 71.613| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 17364 bytes.
( 71.613| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 4341
( 71.613| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 4341
( 71.613| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 17364 bytes.
( 71.613| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 71.614| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 0
( 71.614| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Have to rewind 17364 bytes on render memblockq.
( 71.614| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 71.616| 0.002) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 4584 bytes ago (13064 bytes ahead in playback buffer)
( 71.617| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 4700 bytes ago (12956 bytes ahead in playback buffer)
( 71.617| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 4808 bytes ago (12848 bytes ahead in playback buffer)
( 71.617| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 71.618| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 71.618| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 4912 bytes ago (12744 bytes ahead in playback buffer)
( 71.618| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 19663 / 30% / -31.37 dB, front-right: 19663 / 30% / -31.37 dB
( 71.618| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 19792 / 30% / -31.20 dB, front-right: 19792 / 30% / -31.20 dB
( 71.618| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65109 / 99% / -0.17 dB, front-right: 65109 / 99% / -0.17 dB (accurate-enough=yes)
( 71.618| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 19663 at 3849046076
( 71.618| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 19663 at 3849046076 was written 8054 usec late
( 71.618| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 71.619| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 5100 bytes ago (12556 bytes ahead in playback buffer)
( 71.619| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 5200 bytes ago (12456 bytes ahead in playback buffer)
( 71.620| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 5304 bytes ago (12348 bytes ahead in playback buffer)
( 71.620| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 5416 bytes ago (12240 bytes ahead in playback buffer)
( 71.621| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 5516 bytes ago (12140 bytes ahead in playback buffer)
( 71.621| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 5616 bytes ago (12040 bytes ahead in playback buffer)
( 71.622| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 5720 bytes ago (11936 bytes ahead in playback buffer)
( 71.623| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 5816 bytes ago (11840 bytes ahead in playback buffer)
( 71.623| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 5916 bytes ago (11740 bytes ahead in playback buffer)
( 71.624| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 6032 bytes ago (11624 bytes ahead in playback buffer)
( 71.624| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 6136 bytes ago (11520 bytes ahead in playback buffer)
( 71.624| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Requesting rewind due to corking
( 71.624| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 71.624| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 17364 bytes.
( 71.624| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 4341
( 71.624| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 4341
( 71.625| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 17364 bytes.
( 71.625| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 71.625| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 0
( 71.625| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Have to rewind 17364 bytes on render memblockq.
( 71.625| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Have to rewind 17364 bytes on render memblockq.
( 71.625| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Have to rewind 31920 bytes on implementor.
( 71.625| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 71.626| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17624 bytes ago (36 bytes ahead in playback buffer)
( 71.626| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 6452 bytes ago (11208 bytes ahead in playback buffer)
( 71.626| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 6516 bytes ago (11144 bytes ahead in playback buffer)
( 71.626| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 6572 bytes ago (11088 bytes ahead in playback buffer)
( 71.627| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 6628 bytes ago (11028 bytes ahead in playback buffer)
( 71.627| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 6688 bytes ago (10972 bytes ahead in playback buffer)
( 71.627| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 6740 bytes ago (10924 bytes ahead in playback buffer)
( 71.627| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 6768 bytes ago (10896 bytes ahead in playback buffer)
( 71.628| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 6796 bytes ago (10868 bytes ahead in playback buffer)
( 71.628| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 6816 bytes ago (10848 bytes ahead in playback buffer)
( 71.628| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 6884 bytes ago (10780 bytes ahead in playback buffer)
( 71.628| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 6908 bytes ago (10756 bytes ahead in playback buffer)
( 71.628| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 6924 bytes ago (10740 bytes ahead in playback buffer)
( 71.628| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 6936 bytes ago (10728 bytes ahead in playback buffer)
( 71.628| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 6968 bytes ago (10696 bytes ahead in playback buffer)
( 71.629| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 6984 bytes ago (10680 bytes ahead in playback buffer)
( 71.629| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 7024 bytes ago (10640 bytes ahead in playback buffer)
( 71.629| 0.000) D: [alsa-sink-CX20756 Analog] protocol-native.c: Requesting rewind due to end of underrun.
( 71.629| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 7024 bytes.
( 71.629| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 7024 bytes.
( 71.629| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 1756
( 71.629| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 1756
( 71.629| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 7024 bytes.
( 71.629| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 71.629| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 0
( 71.629| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Have to rewind 7024 bytes on render memblockq.
( 71.629| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Have to rewind 7024 bytes on render memblockq.
( 71.629| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 71.659| 0.029) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 19663 / 30% / -31.37 dB, front-right: 19663 / 30% / -31.37 dB
( 71.659| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 19792 / 30% / -31.20 dB, front-right: 19792 / 30% / -31.20 dB
( 71.659| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65109 / 99% / -0.17 dB, front-right: 65109 / 99% / -0.17 dB (accurate-enough=yes)
( 71.659| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume not changing
( 71.659| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 71.659| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 17340 bytes.
( 71.659| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 4335
( 71.659| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 4335
( 71.659| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 17340 bytes.
( 71.659| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 71.659| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 0
( 71.659| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Have to rewind 17340 bytes on render memblockq.
( 71.659| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 71.663| 0.003) I: [pulseaudio] sink-input.c: Freeing input 4 "'180db_' by 'Aphex Twin'"
( 71.663| 0.000) I: [pulseaudio] client.c: Freed 5 "Clementine"
( 71.663| 0.000) I: [pulseaudio] protocol-native.c: Connection died.
( 71.665| 0.002) D: [alsa-sink-CX20756 Analog] ratelimit.c: 38 events suppressed
( 71.665| 0.000) D: [alsa-sink-CX20756 Analog] memblock.c: Pool full
( 71.665| 0.000) D: [alsa-sink-CX20756 Analog] memblock.c: Pool full
( 71.665| 0.000) D: [alsa-sink-CX20756 Analog] memblock.c: Pool full
( 71.665| 0.000) D: [alsa-sink-CX20756 Analog] memblock.c: Pool full
( 71.665| 0.000) D: [alsa-sink-CX20756 Analog] memblock.c: Pool full
( 71.665| 0.000) D: [alsa-sink-CX20756 Analog] memblock.c: Pool full
( 71.665| 0.000) D: [alsa-sink-CX20756 Analog] memblock.c: Pool full
( 71.665| 0.000) D: [alsa-sink-CX20756 Analog] memblock.c: Pool full
( 71.666| 0.000) D: [alsa-sink-CX20756 Analog] memblock.c: Pool full
( 71.666| 0.000) D: [alsa-sink-CX20756 Analog] memblock.c: Pool full
( 71.666| 0.000) D: [alsa-sink-CX20756 Analog] memblock.c: Pool full
( 71.677| 0.010) D: [pulseaudio] module-stream-restore.c: Not restoring device for stream source-output-by-application-id:org.PulseAudio.pavucontrol, because already set
( 71.677| 0.000) D: [pulseaudio] module-intended-roles.c: Not setting device for stream Peak detect, because already set.
( 71.677| 0.000) D: [pulseaudio] source-output.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\""
( 71.677| 0.000) I: [pulseaudio] source-output.c: Trying to change sample rate
( 71.677| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for source output source-output-by-application-id:org.PulseAudio.pavucontrol.
( 71.677| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_01.1.hdmi-stereo becomes busy, resuming.
( 71.677| 0.000) D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_01.1.hdmi-stereo is 0x0000, resuming
( 71.678| 0.000) D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio0'
( 71.678| 0.000) I: [alsa-sink-HDMI 0] alsa-sink.c: Trying resume...
( 71.679| 0.000) D: [alsa-sink-HDMI 0] alsa-util.c: Maximum hw buffer size is 371 ms
( 71.679| 0.000) D: [alsa-sink-HDMI 0] alsa-util.c: Set buffer size first (to 4416 samples), period size second (to 736 samples).
( 71.679| 0.000) D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=0
( 71.679| 0.000) D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=1
( 71.679| 0.000) I: [alsa-sink-HDMI 0] alsa-sink.c: Resumed successfully...
( 71.679| 0.000) I: [alsa-sink-HDMI 0] alsa-sink.c: Starting playback.
( 71.679| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_01.1.hdmi-stereo becomes idle, timeout in 5 seconds.
( 71.680| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_01.1.hdmi-stereo becomes idle, timeout in 5 seconds.
( 71.680| 0.000) D: [pulseaudio] resampler.c: Channel matrix:
( 71.680| 0.000) D: [pulseaudio] resampler.c: I00 I01
( 71.680| 0.000) D: [pulseaudio] resampler.c: +------------
( 71.680| 0.000) D: [pulseaudio] resampler.c: O00 | 0.500 0.500
( 71.680| 0.000) I: [pulseaudio] remap.c: Using generic matrix remapping
( 71.680| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 71.680| 0.000) D: [pulseaudio] resampler.c: rate 44100 -> 25 (method peaks)
( 71.680| 0.000) D: [pulseaudio] resampler.c: format s16le -> float32le (intermediate s16le)
( 71.680| 0.000) D: [pulseaudio] resampler.c: channels 2 -> 1 (resampling 1)
( 71.680| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 71.680| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 71.680| 0.000) I: [pulseaudio] source-output.c: Created output 0 "Peak detect" on alsa_output.pci-0000_00_01.1.hdmi-stereo.monitor with sample spec float32le 1ch 25Hz and channel map mono
( 71.680| 0.000) I: [pulseaudio] source-output.c: media.name = "Peak detect"
( 71.680| 0.000) I: [pulseaudio] source-output.c: application.name = "PulseAudio Volume Control"
( 71.680| 0.000) I: [pulseaudio] source-output.c: native-protocol.peer = "UNIX socket client"
( 71.680| 0.000) I: [pulseaudio] source-output.c: native-protocol.version = "29"
( 71.680| 0.000) I: [pulseaudio] source-output.c: application.id = "org.PulseAudio.pavucontrol"
( 71.680| 0.000) I: [pulseaudio] source-output.c: application.icon_name = "audio-card"
( 71.680| 0.000) I: [pulseaudio] source-output.c: application.version = "2.0"
( 71.680| 0.000) I: [pulseaudio] source-output.c: application.process.id = "3216"
( 71.680| 0.000) I: [pulseaudio] source-output.c: application.process.user = "david"
( 71.680| 0.000) I: [pulseaudio] source-output.c: application.process.host = "fuileach"
( 71.680| 0.000) I: [pulseaudio] source-output.c: application.process.binary = "pavucontrol"
( 71.680| 0.000) I: [pulseaudio] source-output.c: application.language = "ga_IE.UTF-8"
( 71.680| 0.000) I: [pulseaudio] source-output.c: window.x11.display = ":0"
( 71.680| 0.000) I: [pulseaudio] source-output.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 71.680| 0.000) I: [pulseaudio] source-output.c: application.process.session_id = "1"
( 71.680| 0.000) I: [pulseaudio] source-output.c: module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
( 71.680| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0
( 71.680| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0
( 71.681| 0.000) I: [pulseaudio] protocol-native.c: Final latency 180.14 ms = 80.00 ms + 100.14 ms
( 71.681| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 71.682| 0.001) D: [pulseaudio] module-stream-restore.c: Not restoring device for stream source-output-by-application-id:org.PulseAudio.pavucontrol, because already set
( 71.682| 0.000) D: [pulseaudio] module-intended-roles.c: Not setting device for stream Peak detect, because already set.
( 71.682| 0.000) D: [pulseaudio] source-output.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\""
( 71.682| 0.000) I: [pulseaudio] source-output.c: Trying to change sample rate
( 71.682| 0.000) I: [pulseaudio] source.c: Cannot update rate, this is a monitor source and the sink is running.
( 71.682| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for source output source-output-by-application-id:org.PulseAudio.pavucontrol.
( 71.682| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 71.682| 0.000) D: [pulseaudio] resampler.c: Channel matrix:
( 71.682| 0.000) D: [pulseaudio] resampler.c: I00 I01
( 71.682| 0.000) D: [pulseaudio] resampler.c: +------------
( 71.682| 0.000) D: [pulseaudio] resampler.c: O00 | 0.500 0.500
( 71.682| 0.000) I: [pulseaudio] remap.c: Using generic matrix remapping
( 71.682| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 71.682| 0.000) D: [pulseaudio] resampler.c: rate 48000 -> 25 (method peaks)
( 71.682| 0.000) D: [pulseaudio] resampler.c: format s16le -> float32le (intermediate s16le)
( 71.682| 0.000) D: [pulseaudio] resampler.c: channels 2 -> 1 (resampling 1)
( 71.683| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 71.683| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 71.683| 0.000) I: [pulseaudio] source-output.c: Created output 1 "Peak detect" on alsa_output.pci-0000_00_14.2.analog-stereo.monitor with sample spec float32le 1ch 25Hz and channel map mono
( 71.683| 0.000) I: [pulseaudio] source-output.c: media.name = "Peak detect"
( 71.683| 0.000) I: [pulseaudio] source-output.c: application.name = "PulseAudio Volume Control"
( 71.683| 0.000) I: [pulseaudio] source-output.c: native-protocol.peer = "UNIX socket client"
( 71.683| 0.000) I: [pulseaudio] source-output.c: native-protocol.version = "29"
( 71.683| 0.000) I: [pulseaudio] source-output.c: application.id = "org.PulseAudio.pavucontrol"
( 71.683| 0.000) I: [pulseaudio] source-output.c: application.icon_name = "audio-card"
( 71.683| 0.000) I: [pulseaudio] source-output.c: application.version = "2.0"
( 71.683| 0.000) I: [pulseaudio] source-output.c: application.process.id = "3216"
( 71.683| 0.000) I: [pulseaudio] source-output.c: application.process.user = "david"
( 71.683| 0.000) I: [pulseaudio] source-output.c: application.process.host = "fuileach"
( 71.683| 0.000) I: [pulseaudio] source-output.c: application.process.binary = "pavucontrol"
( 71.683| 0.000) I: [pulseaudio] source-output.c: application.language = "ga_IE.UTF-8"
( 71.683| 0.000) I: [pulseaudio] source-output.c: window.x11.display = ":0"
( 71.683| 0.000) I: [pulseaudio] source-output.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 71.683| 0.000) I: [pulseaudio] source-output.c: application.process.session_id = "1"
( 71.683| 0.000) I: [pulseaudio] source-output.c: module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
( 71.684| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0
( 71.684| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0
( 71.684| 0.000) I: [pulseaudio] protocol-native.c: Final latency 180.14 ms = 80.00 ms + 100.14 ms
( 71.685| 0.001) D: [pulseaudio] module-stream-restore.c: Not restoring device for stream source-output-by-application-id:org.PulseAudio.pavucontrol, because already set
( 71.686| 0.000) D: [pulseaudio] module-intended-roles.c: Not setting device for stream Peak detect, because already set.
( 71.686| 0.000) D: [pulseaudio] source-output.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\""
( 71.686| 0.000) I: [pulseaudio] source-output.c: Trying to change sample rate
( 71.686| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for source output source-output-by-application-id:org.PulseAudio.pavucontrol.
( 71.686| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 71.686| 0.000) D: [pulseaudio] source.c: Suspend cause of source alsa_input.pci-0000_00_14.2.analog-stereo is 0x0000, resuming
( 71.686| 0.000) I: [alsa-source-CX20756 Analog] alsa-source.c: Trying resume...
( 71.687| 0.000) D: [alsa-source-CX20756 Analog] alsa-util.c: Maximum hw buffer size is 371 ms
( 71.687| 0.000) D: [alsa-source-CX20756 Analog] alsa-util.c: Set buffer size first (to 4416 samples), period size second (to 736 samples).
( 71.687| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: hwbuf_unused=0
( 71.687| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: setting avail_min=1
( 71.687| 0.000) I: [alsa-source-CX20756 Analog] alsa-source.c: Resumed successfully...
( 71.687| 0.000) I: [alsa-source-CX20756 Analog] alsa-source.c: Starting capture.
( 71.687| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 71.687| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 71.687| 0.000) D: [pulseaudio] resampler.c: Channel matrix:
( 71.687| 0.000) D: [pulseaudio] resampler.c: I00 I01
( 71.687| 0.000) D: [pulseaudio] resampler.c: +------------
( 71.687| 0.000) D: [pulseaudio] resampler.c: O00 | 0.500 0.500
( 71.687| 0.000) I: [pulseaudio] remap.c: Using generic matrix remapping
( 71.687| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 71.687| 0.000) D: [pulseaudio] resampler.c: rate 44100 -> 25 (method peaks)
( 71.687| 0.000) D: [pulseaudio] resampler.c: format s16le -> float32le (intermediate s16le)
( 71.687| 0.000) D: [pulseaudio] resampler.c: channels 2 -> 1 (resampling 1)
( 71.687| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 71.687| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 71.687| 0.000) I: [pulseaudio] source-output.c: Created output 2 "Peak detect" on alsa_input.pci-0000_00_14.2.analog-stereo with sample spec float32le 1ch 25Hz and channel map mono
( 71.687| 0.000) I: [pulseaudio] source-output.c: media.name = "Peak detect"
( 71.687| 0.000) I: [pulseaudio] source-output.c: application.name = "PulseAudio Volume Control"
( 71.687| 0.000) I: [pulseaudio] source-output.c: native-protocol.peer = "UNIX socket client"
( 71.687| 0.000) I: [pulseaudio] source-output.c: native-protocol.version = "29"
( 71.687| 0.000) I: [pulseaudio] source-output.c: application.id = "org.PulseAudio.pavucontrol"
( 71.687| 0.000) I: [pulseaudio] source-output.c: application.icon_name = "audio-card"
( 71.687| 0.000) I: [pulseaudio] source-output.c: application.version = "2.0"
( 71.687| 0.000) I: [pulseaudio] source-output.c: application.process.id = "3216"
( 71.687| 0.000) I: [pulseaudio] source-output.c: application.process.user = "david"
( 71.687| 0.000) I: [pulseaudio] source-output.c: application.process.host = "fuileach"
( 71.687| 0.000) I: [pulseaudio] source-output.c: application.process.binary = "pavucontrol"
( 71.687| 0.000) I: [pulseaudio] source-output.c: application.language = "ga_IE.UTF-8"
( 71.687| 0.000) I: [pulseaudio] source-output.c: window.x11.display = ":0"
( 71.687| 0.000) I: [pulseaudio] source-output.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 71.687| 0.000) I: [pulseaudio] source-output.c: application.process.session_id = "1"
( 71.687| 0.000) I: [pulseaudio] source-output.c: module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
( 71.688| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0
( 71.688| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0
( 71.688| 0.000) I: [pulseaudio] protocol-native.c: Final latency 180.14 ms = 80.00 ms + 100.14 ms
( 71.688| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: Requested volume: front-left: 44205 / 67% / -10.26 dB, front-right: 44205 / 67% / -10.26 dB
( 71.688| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: Got hardware volume: front-left: 41350 / 63% / -12.00 dB, front-right: 41350 / 63% / -12.00 dB
( 71.688| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: Calculated software volume: front-left: 70061 / 107% / 1.74 dB, front-right: 70061 / 107% / 1.74 dB (accurate-enough=no)
( 71.688| 0.000) D: [alsa-source-CX20756 Analog] source.c: Volume going down to 41350 at 3849116516
( 71.688| 0.000) D: [alsa-source-CX20756 Analog] source.c: Volume change to 41350 at 3849116516 was written 7788 usec late
( 71.689| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 71.692| 0.003) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 71.692| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 34506 / 53% / -16.72 dB, front-right: 34506 / 53% / -16.72 dB
( 71.693| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 34659 / 53% / -16.60 dB, front-right: 34659 / 53% / -16.60 dB
( 71.693| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65247 / 100% / -0.12 dB, front-right: 65247 / 100% / -0.12 dB (accurate-enough=yes)
( 71.693| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 34506 at 3849136502
( 71.693| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 71.694| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 71.694| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 34779 / 53% / -16.51 dB, front-right: 34779 / 53% / -16.51 dB
( 71.694| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 34926 / 53% / -16.40 dB, front-right: 34926 / 53% / -16.40 dB
( 71.694| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65260 / 100% / -0.11 dB, front-right: 65260 / 100% / -0.11 dB (accurate-enough=yes)
( 71.694| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 34779 at 3849137972
( 71.694| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 71.694| 0.000) D: [pulseaudio] module-intended-roles.c: Not setting device for stream Peak detect, because already set.
( 71.694| 0.000) D: [pulseaudio] source-output.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\""
( 71.695| 0.000) I: [pulseaudio] source-output.c: Trying to change sample rate
( 71.695| 0.000) I: [pulseaudio] source.c: Cannot update rate, SOURCE_IS_RUNNING, will keep using 48000 Hz
( 71.695| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for source output source-output-by-application-id:org.PulseAudio.pavucontrol.
( 71.695| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 71.695| 0.000) D: [pulseaudio] resampler.c: Channel matrix:
( 71.695| 0.000) D: [pulseaudio] resampler.c: I00 I01
( 71.695| 0.000) D: [pulseaudio] resampler.c: +------------
( 71.695| 0.000) D: [pulseaudio] resampler.c: O00 | 0.500 0.500
( 71.695| 0.000) I: [pulseaudio] remap.c: Using generic matrix remapping
( 71.695| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 71.695| 0.000) D: [pulseaudio] resampler.c: rate 48000 -> 25 (method peaks)
( 71.695| 0.000) D: [pulseaudio] resampler.c: format s16le -> float32le (intermediate s16le)
( 71.695| 0.000) D: [pulseaudio] resampler.c: channels 2 -> 1 (resampling 1)
( 71.695| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 71.695| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 71.695| 0.000) I: [pulseaudio] source-output.c: Created output 3 "Peak detect" on alsa_output.pci-0000_00_14.2.analog-stereo.monitor with sample spec float32le 1ch 25Hz and channel map mono
( 71.695| 0.000) I: [pulseaudio] source-output.c: media.name = "Peak detect"
( 71.695| 0.000) I: [pulseaudio] source-output.c: application.name = "PulseAudio Volume Control"
( 71.695| 0.000) I: [pulseaudio] source-output.c: native-protocol.peer = "UNIX socket client"
( 71.695| 0.000) I: [pulseaudio] source-output.c: native-protocol.version = "29"
( 71.695| 0.000) I: [pulseaudio] source-output.c: application.id = "org.PulseAudio.pavucontrol"
( 71.695| 0.000) I: [pulseaudio] source-output.c: application.icon_name = "audio-card"
( 71.695| 0.000) I: [pulseaudio] source-output.c: application.version = "2.0"
( 71.695| 0.000) I: [pulseaudio] source-output.c: application.process.id = "3216"
( 71.695| 0.000) I: [pulseaudio] source-output.c: application.process.user = "david"
( 71.695| 0.000) I: [pulseaudio] source-output.c: application.process.host = "fuileach"
( 71.695| 0.000) I: [pulseaudio] source-output.c: application.process.binary = "pavucontrol"
( 71.695| 0.000) I: [pulseaudio] source-output.c: application.language = "ga_IE.UTF-8"
( 71.695| 0.000) I: [pulseaudio] source-output.c: window.x11.display = ":0"
( 71.695| 0.000) I: [pulseaudio] source-output.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 71.695| 0.000) I: [pulseaudio] source-output.c: application.process.session_id = "1"
( 71.695| 0.000) I: [pulseaudio] source-output.c: module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
( 71.696| 0.001) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0
( 71.696| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0
( 71.696| 0.000) I: [pulseaudio] protocol-native.c: Final latency 180.14 ms = 80.00 ms + 100.14 ms
( 71.697| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 71.697| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 35053 / 53% / -16.31 dB, front-right: 35053 / 53% / -16.31 dB
( 71.697| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 35195 / 54% / -16.20 dB, front-right: 35195 / 54% / -16.20 dB
( 71.697| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65272 / 100% / -0.11 dB, front-right: 65272 / 100% / -0.11 dB (accurate-enough=yes)
( 71.697| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 35053 at 3849141355
( 71.698| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 71.698| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 71.698| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 35053 / 53% / -16.31 dB, front-right: 35053 / 53% / -16.31 dB
( 71.699| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 35195 / 54% / -16.20 dB, front-right: 35195 / 54% / -16.20 dB
( 71.699| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65272 / 100% / -0.11 dB, front-right: 65272 / 100% / -0.11 dB (accurate-enough=yes)
( 71.699| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 35053 at 3849142512
( 71.699| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 35053 at 3849141355 was dropped
( 71.700| 0.001) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 71.700| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 35326 / 54% / -16.10 dB, front-right: 35326 / 54% / -16.10 dB
( 71.700| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 35466 / 54% / -16.00 dB, front-right: 35466 / 54% / -16.00 dB
( 71.700| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65277 / 100% / -0.10 dB, front-right: 65277 / 100% / -0.10 dB (accurate-enough=yes)
( 71.701| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 35326 at 3849144450
( 71.701| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 71.701| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 34506 at 3849136502 was written 336 usec late
( 73.708| 2.007) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Written HW volume did not match with the request: front-left: 34506 / 53% / -16.72 dB, front-right: 34506 / 53% / -16.72 dB (request) != front-left: 34131 / 52% / -17.00 dB, front-right: 34131 / 52% / -17.00 dB
( 73.709| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 34779 at 3849137972 was written 2006449 usec late
( 73.709| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 35053 at 3849142512 was written 2001909 usec late
( 73.709| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 35326 at 3849144450 was written 1999971 usec late
( 75.724| 2.015) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 75.724| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 36147 / 55% / -15.50 dB, front-right: 36147 / 55% / -15.50 dB
( 75.725| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 36293 / 55% / -15.40 dB, front-right: 36293 / 55% / -15.40 dB
( 75.725| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65272 / 100% / -0.11 dB, front-right: 65272 / 100% / -0.11 dB (accurate-enough=yes)
( 75.725| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 36147 at 3853168600
( 75.725| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 75.725| 0.000) I: [pulseaudio] module-device-restore.c: Synced.
( 75.729| 0.003) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 75.729| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 36420 / 56% / -15.31 dB, front-right: 36420 / 56% / -15.31 dB
( 75.729| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 36572 / 56% / -15.20 dB, front-right: 36572 / 56% / -15.20 dB
( 75.729| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65264 / 100% / -0.11 dB, front-right: 65264 / 100% / -0.11 dB (accurate-enough=yes)
( 75.729| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 36420 at 3853173231
( 75.730| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 75.732| 0.002) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 75.732| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 36694 / 56% / -15.11 dB, front-right: 36694 / 56% / -15.11 dB
( 75.732| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 36854 / 56% / -15.00 dB, front-right: 36854 / 56% / -15.00 dB
( 75.732| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65251 / 100% / -0.11 dB, front-right: 65251 / 100% / -0.11 dB (accurate-enough=yes)
( 75.732| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 36694 at 3853176354
( 75.733| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 75.733| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 36147 at 3853168600 was written 401 usec late
( 75.733| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Written HW volume did not match with the request: front-left: 36147 / 55% / -15.50 dB, front-right: 36147 / 55% / -15.50 dB (request) != front-left: 35466 / 54% / -16.00 dB, front-right: 35466 / 54% / -16.00 dB
( 75.733| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 75.734| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 36967 / 56% / -14.92 dB, front-right: 36967 / 56% / -14.92 dB
( 75.734| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 37137 / 57% / -14.80 dB, front-right: 37137 / 57% / -14.80 dB
( 75.734| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65236 / 100% / -0.12 dB, front-right: 65236 / 100% / -0.12 dB (accurate-enough=yes)
( 75.734| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 36967 at 3853178077
( 75.734| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 75.735| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 75.735| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 37514 / 57% / -14.54 dB, front-right: 37514 / 57% / -14.54 dB
( 75.735| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 37712 / 58% / -14.40 dB, front-right: 37712 / 58% / -14.40 dB
( 75.735| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65192 / 99% / -0.14 dB, front-right: 65192 / 99% / -0.14 dB (accurate-enough=yes)
( 75.735| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 37514 at 3853178911
( 75.735| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 75.736| 0.001) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 75.737| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 38061 / 58% / -14.16 dB, front-right: 38061 / 58% / -14.16 dB
( 75.737| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 38295 / 58% / -14.00 dB, front-right: 38295 / 58% / -14.00 dB
( 75.737| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65136 / 99% / -0.16 dB, front-right: 65136 / 99% / -0.16 dB (accurate-enough=yes)
( 75.737| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 38061 at 3853180640
( 75.737| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 75.738| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 36420 at 3853173231 was written 268 usec late
( 77.744| 2.006) D: [alsa-sink-CX20756 Analog] ratelimit.c: 2965 events suppressed
( 77.745| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 2855 usec
( 77.745| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 36694 at 3853176354 was written 2004155 usec late
( 77.745| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 36967 at 3853178077 was written 2002432 usec late
( 77.745| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 37514 at 3853178911 was written 2001598 usec late
( 77.745| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 38061 at 3853180640 was written 1999869 usec late
( 79.753| 2.007) D: [alsa-sink-CX20756 Analog] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 79.753| 0.000) D: [alsa-sink-CX20756 Analog] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 79.753| 0.000) D: [alsa-sink-CX20756 Analog] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 79.753| 0.000) D: [alsa-sink-CX20756 Analog] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 79.753| 0.000) D: [alsa-sink-CX20756 Analog] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 79.753| 0.000) D: [alsa-sink-CX20756 Analog] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 79.753| 0.000) D: [alsa-sink-CX20756 Analog] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 79.753| 0.000) D: [alsa-sink-CX20756 Analog] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 79.753| 0.000) D: [alsa-sink-CX20756 Analog] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 79.753| 0.000) D: [alsa-sink-CX20756 Analog] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 79.755| 0.001) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 79.755| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 38334 / 58% / -13.97 dB, front-right: 38334 / 58% / -13.97 dB
( 79.755| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 38591 / 59% / -13.80 dB, front-right: 38591 / 59% / -13.80 dB
( 79.755| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65100 / 99% / -0.17 dB, front-right: 65100 / 99% / -0.17 dB (accurate-enough=yes)
( 79.755| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 38334 at 3857199119
( 79.755| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 79.759| 0.003) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 79.759| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 39155 / 60% / -13.42 dB, front-right: 39155 / 60% / -13.42 dB
( 79.759| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 39188 / 60% / -13.40 dB, front-right: 39188 / 60% / -13.40 dB
( 79.759| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65481 / 100% / -0.02 dB, front-right: 65481 / 100% / -0.02 dB (accurate-enough=yes)
( 79.759| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 39155 at 3857203211
( 79.760| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 79.761| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 79.762| 0.001) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 40522 / 62% / -12.53 dB, front-right: 40522 / 62% / -12.53 dB
( 79.762| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 40720 / 62% / -12.40 dB, front-right: 40720 / 62% / -12.40 dB
( 79.762| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65217 / 100% / -0.13 dB, front-right: 65217 / 100% / -0.13 dB (accurate-enough=yes)
( 79.762| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 40522 at 3857205831
( 79.762| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 79.763| 0.001) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 79.764| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 38334 at 3857199119 was written 422 usec late
( 79.764| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 41069 / 63% / -12.18 dB, front-right: 41069 / 63% / -12.18 dB
( 79.764| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 41350 / 63% / -12.00 dB, front-right: 41350 / 63% / -12.00 dB
( 79.764| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65091 / 99% / -0.18 dB, front-right: 65091 / 99% / -0.18 dB (accurate-enough=yes)
( 79.764| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 41069 at 3857207940
( 79.764| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 79.765| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 79.765| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 41616 / 64% / -11.83 dB, front-right: 41616 / 64% / -11.83 dB
( 79.765| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 41669 / 64% / -11.80 dB, front-right: 41669 / 64% / -11.80 dB
( 79.765| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65453 / 100% / -0.03 dB, front-right: 65453 / 100% / -0.03 dB (accurate-enough=yes)
( 79.765| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 41616 at 3857208811
( 79.765| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 79.765| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 79.766| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 42163 / 64% / -11.49 dB, front-right: 42163 / 64% / -11.49 dB
( 79.766| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 42314 / 65% / -11.40 dB, front-right: 42314 / 65% / -11.40 dB
( 79.766| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65302 / 100% / -0.09 dB, front-right: 65302 / 100% / -0.09 dB (accurate-enough=yes)
( 79.766| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 42163 at 3857209583
( 79.766| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 79.766| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 79.767| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 42436 / 65% / -11.32 dB, front-right: 42436 / 65% / -11.32 dB
( 79.767| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 42640 / 65% / -11.20 dB, front-right: 42640 / 65% / -11.20 dB
( 79.767| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65222 / 100% / -0.13 dB, front-right: 65222 / 100% / -0.13 dB (accurate-enough=yes)
( 79.767| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 42436 at 3857210684
( 79.767| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 79.767| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 39155 at 3857203211 was written 139 usec late
( 79.767| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 81.780| 2.012) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 42983 / 66% / -10.99 dB, front-right: 42983 / 66% / -10.99 dB
( 81.781| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 43299 / 66% / -10.80 dB, front-right: 43299 / 66% / -10.80 dB
( 81.781| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65058 / 99% / -0.19 dB, front-right: 65058 / 99% / -0.19 dB (accurate-enough=yes)
( 81.781| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 42983 at 3859224544
( 81.781| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 40522 at 3857205831 was written 2010806 usec late
( 81.781| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 41069 at 3857207940 was written 2008697 usec late
( 81.781| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 41616 at 3857208811 was written 2007826 usec late
( 81.781| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 42163 at 3857209583 was written 2007054 usec late
( 81.781| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 81.781| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 42436 at 3857210684 was written 2005953 usec late
( 83.788| 2.007) D: [alsa-sink-CX20756 Analog] ratelimit.c: 251 events suppressed
( 83.789| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 7907 usec
( 83.790| 0.001) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 42983 at 3859224544 was written 2001501 usec late
( 83.792| 0.002) D: [pulseaudio] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 83.792| 0.000) D: [pulseaudio] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 83.792| 0.000) D: [pulseaudio] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 83.793| 0.000) D: [pulseaudio] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 83.793| 0.000) D: [pulseaudio] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 83.793| 0.000) D: [pulseaudio] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 83.793| 0.000) D: [pulseaudio] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 83.793| 0.000) D: [pulseaudio] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 83.793| 0.000) D: [pulseaudio] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 83.793| 0.000) D: [pulseaudio] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 83.794| 0.001) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 83.795| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 43256 / 66% / -10.83 dB, front-right: 43256 / 66% / -10.83 dB
( 83.795| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 43299 / 66% / -10.80 dB, front-right: 43299 / 66% / -10.80 dB
( 83.795| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65471 / 100% / -0.03 dB, front-right: 65471 / 100% / -0.03 dB (accurate-enough=yes)
( 83.795| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 43256 at 3861239305
( 83.796| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 83.796| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 83.797| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 48999 / 75% / -7.58 dB, front-right: 48999 / 75% / -7.58 dB
( 83.797| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 49334 / 75% / -7.40 dB, front-right: 49334 / 75% / -7.40 dB
( 83.797| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65091 / 99% / -0.18 dB, front-right: 65091 / 99% / -0.18 dB (accurate-enough=yes)
( 83.797| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 48999 at 3861240948
( 83.797| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 83.798| 0.001) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 83.799| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 49546 / 76% / -7.29 dB, front-right: 49546 / 76% / -7.29 dB
( 83.799| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 49714 / 76% / -7.20 dB, front-right: 49714 / 76% / -7.20 dB
( 83.799| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65315 / 100% / -0.09 dB, front-right: 65315 / 100% / -0.09 dB (accurate-enough=yes)
( 83.799| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 49546 at 3861242700
( 83.799| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 83.800| 0.001) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 83.800| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 49546 / 76% / -7.29 dB, front-right: 49546 / 76% / -7.29 dB
( 83.801| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 49714 / 76% / -7.20 dB, front-right: 49714 / 76% / -7.20 dB
( 83.801| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65315 / 100% / -0.09 dB, front-right: 65315 / 100% / -0.09 dB (accurate-enough=yes)
( 83.801| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 49546 at 3861244506
( 83.801| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 49546 at 3861242700 was dropped
( 83.801| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Requesting rewind due to corking
( 83.801| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 83.801| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 17384 bytes.
( 83.801| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 4346
( 83.801| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 4346
( 83.801| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 17384 bytes.
( 83.801| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 83.801| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 0
( 83.801| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Have to rewind 17384 bytes on render memblockq.
( 83.801| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Have to rewind 17384 bytes on implementor.
( 83.802| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 83.804| 0.001) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 43256 at 3861239305 was written 131 usec late
( 83.804| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 83.804| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 49546 / 76% / -7.29 dB, front-right: 49546 / 76% / -7.29 dB
( 83.804| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 49714 / 76% / -7.20 dB, front-right: 49714 / 76% / -7.20 dB
( 83.805| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65315 / 100% / -0.09 dB, front-right: 65315 / 100% / -0.09 dB (accurate-enough=yes)
( 83.805| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 49546 at 3861248480
( 83.805| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 49546 at 3861244506 was dropped
( 83.805| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 48999 at 3861240948 was written 83 usec late
( 85.812| 2.007) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Written HW volume did not match with the request: front-left: 48999 / 75% / -7.58 dB, front-right: 48999 / 75% / -7.58 dB (request) != front-left: 48211 / 74% / -8.00 dB, front-right: 48211 / 74% / -8.00 dB
( 85.813| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 49546 at 3861248480 was written 1999949 usec late
( 85.813| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 87.821| 2.008) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 49819 / 76% / -7.15 dB, front-right: 49819 / 76% / -7.15 dB
( 87.821| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 50097 / 76% / -7.00 dB, front-right: 50097 / 76% / -7.00 dB
( 87.821| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65172 / 99% / -0.15 dB, front-right: 65172 / 99% / -0.15 dB (accurate-enough=yes)
( 87.821| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 49819 at 3865265377
( 87.822| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 87.822| 0.000) I: [pulseaudio] module-device-restore.c: Synced.
( 87.822| 0.000) I: [pulseaudio] source-output.c: Freeing output 3 "Peak detect"
( 87.823| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 49819 / 76% / -7.15 dB, front-right: 49819 / 76% / -7.15 dB
( 87.823| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 50097 / 76% / -7.00 dB, front-right: 50097 / 76% / -7.00 dB
( 87.823| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65172 / 99% / -0.15 dB, front-right: 65172 / 99% / -0.15 dB (accurate-enough=yes)
( 87.823| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 49819 at 3865266787
( 87.823| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 49819 at 3865265377 was dropped
( 87.823| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 87.823| 0.000) I: [pulseaudio] sink-input.c: Freeing input 1 "AudioStream"
( 87.823| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 17324 bytes.
( 87.823| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 4331
( 87.823| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 4331
( 87.823| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 17324 bytes.
( 87.823| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 87.823| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 0
( 87.823| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 87.825| 0.002) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 87.826| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 49546 / 76% / -7.29 dB, front-right: 49546 / 76% / -7.29 dB
( 87.826| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 49714 / 76% / -7.20 dB, front-right: 49714 / 76% / -7.20 dB
( 87.826| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65315 / 100% / -0.09 dB, front-right: 65315 / 100% / -0.09 dB (accurate-enough=yes)
( 87.826| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 49546 at 3865253969
( 87.826| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 49819 at 3865266787 was dropped
( 87.826| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 49546 at 3865253969 was written 8105 usec late
( 87.826| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 87.827| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 87.827| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 48178 / 74% / -8.02 dB, front-right: 48178 / 74% / -8.02 dB
( 87.827| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 48211 / 74% / -8.00 dB, front-right: 48211 / 74% / -8.00 dB
( 87.828| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65491 / 100% / -0.02 dB, front-right: 65491 / 100% / -0.02 dB (accurate-enough=yes)
( 87.828| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 48178 at 3865255517
( 87.828| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 48178 at 3865255517 was written 8055 usec late
( 87.828| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 87.828| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 89.837| 2.008) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 46478 / 71% / -8.95 dB, front-right: 46478 / 71% / -8.95 dB
( 89.837| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 46754 / 71% / -8.80 dB, front-right: 46754 / 71% / -8.80 dB
( 89.837| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65149 / 99% / -0.15 dB, front-right: 65149 / 99% / -0.15 dB (accurate-enough=yes)
( 89.837| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 46478 at 3867265070
( 89.837| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 46478 at 3867265070 was written 8065 usec late
( 91.849| 2.011) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 91.851| 0.001) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 91.852| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 44564 / 68% / -10.05 dB, front-right: 44564 / 68% / -10.05 dB
( 91.852| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 44649 / 68% / -10.00 dB, front-right: 44649 / 68% / -10.00 dB
( 91.852| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65411 / 100% / -0.05 dB, front-right: 65411 / 100% / -0.05 dB (accurate-enough=yes)
( 91.852| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 44564 at 3869279626
( 91.852| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 44564 at 3869279626 was written 8053 usec late
( 91.852| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 93.861| 2.009) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 93.862| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 41309 / 63% / -12.03 dB, front-right: 41309 / 63% / -12.03 dB
( 93.862| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 41350 / 63% / -12.00 dB, front-right: 41350 / 63% / -12.00 dB
( 93.862| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65471 / 100% / -0.03 dB, front-right: 65471 / 100% / -0.03 dB (accurate-enough=yes)
( 93.862| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 41309 at 3871289676
( 93.862| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 41309 at 3871289676 was written 8057 usec late
( 93.862| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 93.876| 0.013) D: [alsa-sink-HDMI 0] ratelimit.c: 311 events suppressed
( 93.876| 0.000) D: [alsa-sink-HDMI 0] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 93.876| 0.000) D: [alsa-sink-HDMI 0] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 95.094| 1.218) D: [alsa-sink-HDMI 0] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 95.875| 0.780) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 95.875| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 34565 / 53% / -16.67 dB, front-right: 34565 / 53% / -16.67 dB
( 95.875| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 34659 / 53% / -16.60 dB, front-right: 34659 / 53% / -16.60 dB
( 95.875| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65358 / 100% / -0.07 dB, front-right: 65358 / 100% / -0.07 dB (accurate-enough=yes)
( 95.875| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 34565 at 3873303275
( 95.875| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 34565 at 3873303275 was written 8056 usec late
( 95.876| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 95.876| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 97.884| 2.008) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Written HW volume did not match with the request: front-left: 34565 / 53% / -16.67 dB, front-right: 34565 / 53% / -16.67 dB (request) != front-left: 34131 / 52% / -17.00 dB, front-right: 34131 / 52% / -17.00 dB
( 97.885| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 33136 / 51% / -17.77 dB, front-right: 33136 / 51% / -17.77 dB
( 97.885| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 33354 / 51% / -17.60 dB, front-right: 33354 / 51% / -17.60 dB
( 97.885| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65108 / 99% / -0.17 dB, front-right: 65108 / 99% / -0.17 dB (accurate-enough=yes)
( 97.885| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 33136 at 3875313166
( 97.885| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 33136 at 3875313166 was written 8062 usec late
( 97.886| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 97.886| 0.000) I: [pulseaudio] module-device-restore.c: Synced.
( 99.893| 2.007) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 99.893| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 32589 / 50% / -18.20 dB, front-right: 32589 / 50% / -18.20 dB
( 99.894| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 32595 / 50% / -18.20 dB, front-right: 32595 / 50% / -18.20 dB
( 99.894| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65524 / 100% / -0.00 dB, front-right: 65524 / 100% / -0.00 dB (accurate-enough=yes)
( 99.894| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 32589 at 3877321474
( 99.894| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 32589 at 3877321474 was written 8025 usec late
( 99.894| 0.000) I: [pulseaudio] client.c: Created 7 "Native client (UNIX socket client)"
( 99.894| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 99.894| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 99.894| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 30675 / 47% / -19.78 dB, front-right: 30675 / 47% / -19.78 dB
( 99.894| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 30889 / 47% / -19.60 dB, front-right: 30889 / 47% / -19.60 dB
( 99.894| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65082 / 99% / -0.18 dB, front-right: 65082 / 99% / -0.18 dB (accurate-enough=yes)
( 99.894| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 30675 at 3877322139
( 99.894| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 30675 at 3877322139 was written 8029 usec late
( 99.894| 0.000) D: [pulseaudio] protocol-native.c: Protocol version: remote 29, local 29
( 99.894| 0.000) I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
( 99.894| 0.000) D: [pulseaudio] protocol-native.c: SHM possible: yes
( 99.894| 0.000) D: [pulseaudio] protocol-native.c: Negotiated SHM: yes
( 99.894| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 99.895| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 101.904| 2.009) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 30401 / 46% / -20.02 dB, front-right: 30401 / 46% / -20.02 dB
( 101.904| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 30419 / 46% / -20.00 dB, front-right: 30419 / 46% / -20.00 dB
( 101.905| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65497 / 100% / -0.02 dB, front-right: 65497 / 100% / -0.02 dB (accurate-enough=yes)
( 101.905| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 30401 at 3879332463
( 101.905| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 30401 at 3879332463 was written 8028 usec late
( 101.905| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 101.906| 0.000) D: [pulseaudio] module-augment-properties.c: Looking for .desktop file for clementine
( 101.958| 0.052) I: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-application-name:Clementine.
( 101.958| 0.000) D: [pulseaudio] module-intended-roles.c: Not setting device for stream pulsesink probe, because already set.
( 101.959| 0.000) D: [pulseaudio] sink-input.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.channels = "2" format.rate = "44100" format.channel_map = "\"front-left,front-right\""
( 101.959| 0.000) I: [pulseaudio] sink-input.c: Trying to change sample rate
( 101.959| 0.000) I: [pulseaudio] sink.c: Cannot update rate, monitor source is RUNNING
( 101.959| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring volume for sink input sink-input-by-application-name:Clementine.
( 101.959| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for sink input sink-input-by-application-name:Clementine.
( 101.959| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 101.959| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 101.959| 0.000) D: [pulseaudio] resampler.c: rate 44100 -> 48000 (method speex-float-1)
( 101.959| 0.000) D: [pulseaudio] resampler.c: format float32le -> s16le (intermediate float32le)
( 101.959| 0.000) D: [pulseaudio] resampler.c: channels 2 -> 2 (resampling 2)
( 101.959| 0.000) I: [pulseaudio] resampler.c: Choosing speex quality setting 1.
( 101.959| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 101.959| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 101.959| 0.000) I: [pulseaudio] sink-input.c: Created input 5 "pulsesink probe" on alsa_output.pci-0000_00_14.2.analog-stereo with sample spec float32le 2ch 44100Hz and channel map front-left,front-right
( 101.959| 0.000) I: [pulseaudio] sink-input.c: media.name = "pulsesink probe"
( 101.959| 0.000) I: [pulseaudio] sink-input.c: application.name = "Clementine"
( 101.959| 0.000) I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
( 101.959| 0.000) I: [pulseaudio] sink-input.c: native-protocol.version = "29"
( 101.959| 0.000) I: [pulseaudio] sink-input.c: application.process.id = "3555"
( 101.959| 0.000) I: [pulseaudio] sink-input.c: application.process.user = "david"
( 101.959| 0.000) I: [pulseaudio] sink-input.c: application.process.host = "fuileach"
( 101.959| 0.000) I: [pulseaudio] sink-input.c: application.process.binary = "clementine"
( 101.959| 0.000) I: [pulseaudio] sink-input.c: application.language = "ga_IE.UTF-8"
( 101.959| 0.000) I: [pulseaudio] sink-input.c: window.x11.display = ":0"
( 101.959| 0.000) I: [pulseaudio] sink-input.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 101.959| 0.000) I: [pulseaudio] sink-input.c: application.process.session_id = "1"
( 101.959| 0.000) I: [pulseaudio] sink-input.c: application.icon_name = "application-x-clementine"
( 101.959| 0.000) I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-application-name:Clementine"
( 101.959| 0.000) I: [pulseaudio] protocol-native.c: Requested tlength=136.05 ms, minreq=20.00 ms
( 101.959| 0.000) D: [pulseaudio] protocol-native.c: Adjust latency mode enabled, configuring sink latency to half of overall latency.
( 101.960| 0.000) D: [pulseaudio] protocol-native.c: Requested latency=48.03 ms, Received latency=100.14 ms
( 101.960| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=49440, base=8, prebuf=42392, minreq=7056 maxrewind=0
( 101.960| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=49440, base=8, prebuf=42392, minreq=7056 maxrewind=0
( 101.960| 0.000) I: [pulseaudio] protocol-native.c: Final latency 240.27 ms = 100.14 ms + 2*20.00 ms + 100.14 ms
( 101.960| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 15424 / 24% / -37.70 dB, front-right: 15424 / 24% / -37.70 dB
( 101.960| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 15481 / 24% / -37.60 dB, front-right: 15481 / 24% / -37.60 dB
( 101.960| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65295 / 100% / -0.10 dB, front-right: 65295 / 100% / -0.10 dB (accurate-enough=yes)
( 101.960| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 15424 at 3879387863
( 101.960| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 15424 at 3879387863 was written 8025 usec late
( 103.968| 2.008) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Written HW volume did not match with the request: front-left: 15424 / 24% / -37.70 dB, front-right: 15424 / 24% / -37.70 dB (request) != front-left: 15246 / 23% / -38.00 dB, front-right: 15246 / 23% / -38.00 dB
( 103.970| 0.001) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 30401 / 46% / -20.02 dB, front-right: 30401 / 46% / -20.02 dB
( 103.970| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 30419 / 46% / -20.00 dB, front-right: 30419 / 46% / -20.00 dB
( 103.970| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65497 / 100% / -0.02 dB, front-right: 65497 / 100% / -0.02 dB (accurate-enough=yes)
( 103.970| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 30401 at 3881413991
( 103.970| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 7973 usec
( 103.970| 0.000) I: [pulseaudio] sink-input.c: Freeing input 5 "pulsesink probe"
( 103.970| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 103.970| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 17344 bytes.
( 103.970| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 4336
( 103.970| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 4336
( 103.970| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 17344 bytes.
( 103.970| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 103.970| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 0
( 103.970| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 7756 usec
( 103.970| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 103.970| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-application-name:Clementine.
( 103.970| 0.000) D: [pulseaudio] module-intended-roles.c: Not setting device for stream pulsesink probe, because already set.
( 103.970| 0.000) D: [pulseaudio] sink-input.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.channels = "2" format.rate = "44100" format.channel_map = "\"front-left,front-right\""
( 103.970| 0.000) I: [pulseaudio] sink-input.c: Trying to change sample rate
( 103.970| 0.000) I: [pulseaudio] sink.c: Cannot update rate, monitor source is RUNNING
( 103.971| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring volume for sink input sink-input-by-application-name:Clementine.
( 103.971| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for sink input sink-input-by-application-name:Clementine.
( 103.971| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 103.971| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 7507 usec
( 103.971| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 103.971| 0.000) D: [pulseaudio] resampler.c: rate 44100 -> 48000 (method speex-float-1)
( 103.971| 0.000) D: [pulseaudio] resampler.c: format float32le -> s16le (intermediate float32le)
( 103.971| 0.000) D: [pulseaudio] resampler.c: channels 2 -> 2 (resampling 2)
( 103.971| 0.000) I: [pulseaudio] resampler.c: Choosing speex quality setting 1.
( 103.971| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 103.971| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 103.971| 0.000) I: [pulseaudio] sink-input.c: Created input 6 "pulsesink probe" on alsa_output.pci-0000_00_14.2.analog-stereo with sample spec float32le 2ch 44100Hz and channel map front-left,front-right
( 103.971| 0.000) I: [pulseaudio] sink-input.c: media.name = "pulsesink probe"
( 103.971| 0.000) I: [pulseaudio] sink-input.c: application.name = "Clementine"
( 103.971| 0.000) I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
( 103.971| 0.000) I: [pulseaudio] sink-input.c: native-protocol.version = "29"
( 103.971| 0.000) I: [pulseaudio] sink-input.c: application.process.id = "3555"
( 103.971| 0.000) I: [pulseaudio] sink-input.c: application.process.user = "david"
( 103.971| 0.000) I: [pulseaudio] sink-input.c: application.process.host = "fuileach"
( 103.971| 0.000) I: [pulseaudio] sink-input.c: application.process.binary = "clementine"
( 103.971| 0.000) I: [pulseaudio] sink-input.c: application.language = "ga_IE.UTF-8"
( 103.971| 0.000) I: [pulseaudio] sink-input.c: window.x11.display = ":0"
( 103.971| 0.000) I: [pulseaudio] sink-input.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 103.971| 0.000) I: [pulseaudio] sink-input.c: application.process.session_id = "1"
( 103.971| 0.000) I: [pulseaudio] sink-input.c: application.icon_name = "application-x-clementine"
( 103.971| 0.000) I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-application-name:Clementine"
( 103.971| 0.000) I: [pulseaudio] protocol-native.c: Requested tlength=136.05 ms, minreq=20.00 ms
( 103.971| 0.000) D: [pulseaudio] protocol-native.c: Adjust latency mode enabled, configuring sink latency to half of overall latency.
( 103.971| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 6938 usec
( 103.971| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 6862 usec
( 103.971| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 6825 usec
( 103.971| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 6758 usec
( 103.971| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 6731 usec
( 103.971| 0.000) D: [pulseaudio] protocol-native.c: Requested latency=48.03 ms, Received latency=100.14 ms
( 103.971| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=49440, base=8, prebuf=42392, minreq=7056 maxrewind=0
( 103.971| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 6687 usec
( 103.971| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=49440, base=8, prebuf=42392, minreq=7056 maxrewind=0
( 103.971| 0.000) I: [pulseaudio] protocol-native.c: Final latency 240.27 ms = 100.14 ms + 2*20.00 ms + 100.14 ms
( 103.972| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 6573 usec
( 103.972| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 6506 usec
( 103.972| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 15424 / 24% / -37.70 dB, front-right: 15424 / 24% / -37.70 dB
( 103.972| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 15481 / 24% / -37.60 dB, front-right: 15481 / 24% / -37.60 dB
( 103.972| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65295 / 100% / -0.10 dB, front-right: 65295 / 100% / -0.10 dB (accurate-enough=yes)
( 103.972| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 15424 at 3881399637
( 103.972| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 30401 at 3881413991 was dropped
( 103.972| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 15424 at 3881399637 was written 8045 usec late
( 103.972| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Written HW volume did not match with the request: front-left: 15424 / 24% / -37.70 dB, front-right: 15424 / 24% / -37.70 dB (request) != front-left: 15246 / 23% / -38.00 dB, front-right: 15246 / 23% / -38.00 dB
( 103.972| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 30401 / 46% / -20.02 dB, front-right: 30401 / 46% / -20.02 dB
( 103.972| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 30419 / 46% / -20.00 dB, front-right: 30419 / 46% / -20.00 dB
( 103.972| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65497 / 100% / -0.02 dB, front-right: 65497 / 100% / -0.02 dB (accurate-enough=yes)
( 103.972| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 30401 at 3881416364
( 103.972| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 103.972| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 17372 bytes.
( 103.973| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 4343
( 103.973| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 4343
( 103.973| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 17372 bytes.
( 103.973| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 103.973| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 0
( 103.973| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 103.973| 0.000) I: [pulseaudio] sink-input.c: Freeing input 6 "pulsesink probe"
( 103.973| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-application-name:Clementine.
( 103.973| 0.000) D: [pulseaudio] module-intended-roles.c: Not setting device for stream Playback Stream, because already set.
( 103.973| 0.000) D: [pulseaudio] sink-input.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.channels = "2" format.rate = "44100" format.channel_map = "\"front-left,front-right\""
( 103.973| 0.000) I: [pulseaudio] sink-input.c: Trying to change sample rate
( 103.973| 0.000) I: [pulseaudio] sink.c: Cannot update rate, monitor source is RUNNING
( 103.973| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring volume for sink input sink-input-by-application-name:Clementine.
( 103.973| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for sink input sink-input-by-application-name:Clementine.
( 103.973| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 103.973| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 103.973| 0.000) D: [pulseaudio] resampler.c: rate 44100 -> 48000 (method speex-float-1)
( 103.973| 0.000) D: [pulseaudio] resampler.c: format float32le -> s16le (intermediate float32le)
( 103.973| 0.000) D: [pulseaudio] resampler.c: channels 2 -> 2 (resampling 2)
( 103.973| 0.000) I: [pulseaudio] resampler.c: Choosing speex quality setting 1.
( 103.973| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 103.973| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 103.974| 0.000) I: [pulseaudio] sink-input.c: Created input 7 "Playback Stream" on alsa_output.pci-0000_00_14.2.analog-stereo with sample spec float32le 2ch 44100Hz and channel map front-left,front-right
( 103.974| 0.000) I: [pulseaudio] sink-input.c: media.name = "Playback Stream"
( 103.974| 0.000) I: [pulseaudio] sink-input.c: application.name = "Clementine"
( 103.974| 0.000) I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
( 103.974| 0.000) I: [pulseaudio] sink-input.c: native-protocol.version = "29"
( 103.974| 0.000) I: [pulseaudio] sink-input.c: application.process.id = "3555"
( 103.974| 0.000) I: [pulseaudio] sink-input.c: application.process.user = "david"
( 103.974| 0.000) I: [pulseaudio] sink-input.c: application.process.host = "fuileach"
( 103.974| 0.000) I: [pulseaudio] sink-input.c: application.process.binary = "clementine"
( 103.974| 0.000) I: [pulseaudio] sink-input.c: application.language = "ga_IE.UTF-8"
( 103.974| 0.000) I: [pulseaudio] sink-input.c: window.x11.display = ":0"
( 103.974| 0.000) I: [pulseaudio] sink-input.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 103.974| 0.000) I: [pulseaudio] sink-input.c: application.process.session_id = "1"
( 103.974| 0.000) I: [pulseaudio] sink-input.c: application.icon_name = "application-x-clementine"
( 103.974| 0.000) I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-application-name:Clementine"
( 103.974| 0.000) I: [pulseaudio] protocol-native.c: Requested tlength=200.00 ms, minreq=10.00 ms
( 103.974| 0.000) D: [pulseaudio] protocol-native.c: Adjust latency mode enabled, configuring sink latency to half of overall latency.
( 103.974| 0.000) D: [pulseaudio] protocol-native.c: Requested latency=90.00 ms, Received latency=100.14 ms
( 103.974| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=42384, base=8, prebuf=0, minreq=3528 maxrewind=0
( 103.974| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=42384, base=8, prebuf=0, minreq=3528 maxrewind=0
( 103.974| 0.000) I: [pulseaudio] protocol-native.c: Final latency 220.27 ms = 100.14 ms + 2*10.00 ms + 100.14 ms
( 103.974| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 15424 / 24% / -37.70 dB, front-right: 15424 / 24% / -37.70 dB
( 103.974| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 15481 / 24% / -37.60 dB, front-right: 15481 / 24% / -37.60 dB
( 103.974| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65295 / 100% / -0.10 dB, front-right: 65295 / 100% / -0.10 dB (accurate-enough=yes)
( 103.974| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 15424 at 3881402153
( 103.974| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 30401 at 3881416364 was dropped
( 103.974| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 15424 at 3881402153 was written 8052 usec late
( 103.974| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Written HW volume did not match with the request: front-left: 15424 / 24% / -37.70 dB, front-right: 15424 / 24% / -37.70 dB (request) != front-left: 15246 / 23% / -38.00 dB, front-right: 15246 / 23% / -38.00 dB
( 103.976| 0.001) D: [alsa-sink-CX20756 Analog] protocol-native.c: Requesting rewind due to end of underrun.
( 103.976| 0.000) I: [pulseaudio] sink.c: Cannot update rate, monitor source is RUNNING
( 103.976| 0.000) D: [alsa-sink-CX20756 Analog] protocol-native.c: Requesting rewind due to end of underrun.
( 103.976| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Requesting rewind due to uncorking
( 103.976| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 103.976| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 103.976| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 17392 bytes.
( 103.976| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 4348
( 103.976| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 4348
( 103.977| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 17392 bytes.
( 103.977| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 103.977| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 0
( 103.977| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 107.308| 3.331) D: [alsa-sink-CX20756 Analog] sink-input.c: Requesting rewind due to corking
( 107.308| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 107.308| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 17372 bytes.
( 107.308| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 4343
( 107.308| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 4343
( 107.308| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 17372 bytes.
( 107.308| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 107.308| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 0
( 107.308| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Have to rewind 17372 bytes on render memblockq.
( 107.308| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Have to rewind 31936 bytes on implementor.
( 107.308| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 107.309| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17520 bytes ago (144 bytes ahead in playback buffer)
( 107.309| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17532 bytes ago (132 bytes ahead in playback buffer)
( 107.309| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17588 bytes ago (76 bytes ahead in playback buffer)
( 107.309| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17620 bytes ago (44 bytes ahead in playback buffer)
( 107.312| 0.002) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 30401 / 46% / -20.02 dB, front-right: 30401 / 46% / -20.02 dB
( 107.312| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 30419 / 46% / -20.00 dB, front-right: 30419 / 46% / -20.00 dB
( 107.312| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65497 / 100% / -0.02 dB, front-right: 65497 / 100% / -0.02 dB (accurate-enough=yes)
( 107.312| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 30401 at 3884755755
( 107.312| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 107.312| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 17344 bytes.
( 107.312| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 4336
( 107.312| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 4336
( 107.312| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 17344 bytes.
( 107.312| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 107.312| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 0
( 107.312| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 107.313| 0.000) I: [pulseaudio] sink-input.c: Freeing input 7 "'CIRCLONT6A (Syrobonkus Mix)' by 'Aphex Twin'"
( 107.314| 0.001) I: [pulseaudio] client.c: Freed 7 "Clementine"
( 107.314| 0.000) I: [pulseaudio] protocol-native.c: Connection died.
( 107.320| 0.006) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 30401 at 3884755755 was written 45 usec late
( 109.894| 2.574) I: [pulseaudio] module-device-restore.c: Synced.
( 111.301| 1.407) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_01.1.hdmi-stereo becomes idle, timeout in 5 seconds.
( 111.301| 0.000) I: [pulseaudio] source-output.c: Freeing output 0 "Peak detect"
( 111.301| 0.000) D: [pulseaudio] ratelimit.c: 49 events suppressed
( 111.301| 0.000) D: [pulseaudio] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 111.301| 0.000) D: [pulseaudio] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 111.301| 0.000) D: [pulseaudio] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 111.302| 0.000) D: [pulseaudio] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 111.302| 0.000) D: [pulseaudio] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 111.302| 0.000) D: [pulseaudio] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 111.302| 0.000) D: [pulseaudio] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 111.302| 0.000) D: [pulseaudio] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 111.302| 0.000) D: [pulseaudio] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 111.302| 0.000) D: [pulseaudio] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 111.302| 0.000) D: [pulseaudio] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 111.302| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 111.302| 0.000) I: [pulseaudio] source-output.c: Freeing output 1 "Peak detect"
( 111.302| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: Requested volume: front-left: 44205 / 67% / -10.26 dB, front-right: 44205 / 67% / -10.26 dB
( 111.302| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: Got hardware volume: front-left: 41350 / 63% / -12.00 dB, front-right: 41350 / 63% / -12.00 dB
( 111.302| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: Calculated software volume: front-left: 70061 / 107% / 1.74 dB, front-right: 70061 / 107% / 1.74 dB (accurate-enough=no)
( 111.302| 0.000) D: [alsa-source-CX20756 Analog] source.c: Volume not changing
( 111.302| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 111.303| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 111.303| 0.000) D: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
( 111.313| 0.009) I: [pulseaudio] source-output.c: Freeing output 2 "Peak detect"
( 111.313| 0.000) I: [pulseaudio] client.c: Freed 6 "PulseAudio Volume Control"
( 111.313| 0.000) I: [pulseaudio] protocol-native.c: Connection died.
( 116.306| 4.993) I: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_14.2.analog-stereo idle for too long, suspending ...
( 116.306| 0.000) D: [pulseaudio] source.c: Suspend cause of source alsa_input.pci-0000_00_14.2.analog-stereo is 0x0004, suspending
( 116.306| 0.000) I: [alsa-source-CX20756 Analog] alsa-source.c: Device suspended...
( 116.307| 0.000) D: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
( 116.312| 0.005) I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo idle for too long, suspending ...
( 116.312| 0.000) D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_14.2.analog-stereo is 0x0004, suspending
( 116.313| 0.001) I: [alsa-sink-CX20756 Analog] alsa-sink.c: Device suspended...
( 116.313| 0.000) D: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
( 116.316| 0.002) I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_01.1.hdmi-stereo idle for too long, suspending ...
( 116.316| 0.000) D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_01.1.hdmi-stereo is 0x0004, suspending
( 116.317| 0.000) I: [alsa-sink-HDMI 0] alsa-sink.c: Device suspended...
( 116.317| 0.000) D: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
( 116.321| 0.003) D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
( 116.321| 0.000) D: [pulseaudio] module-udev-detect.c: Resuming all sinks and sources of card alsa_card.pci-0000_00_01.1.
( 116.321| 0.000) D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC1 is accessible: yes
( 116.321| 0.000) D: [pulseaudio] module-udev-detect.c: Resuming all sinks and sources of card alsa_card.pci-0000_00_14.2.
( 127.856| 11.535) I: [pulseaudio] client.c: Created 8 "Native client (UNIX socket client)"
( 127.924| 0.067) D: [pulseaudio] protocol-native.c: Protocol version: remote 29, local 29
( 127.924| 0.000) I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
( 127.924| 0.000) D: [pulseaudio] protocol-native.c: SHM possible: yes
( 127.924| 0.000) D: [pulseaudio] protocol-native.c: Negotiated SHM: yes
( 127.925| 0.000) D: [pulseaudio] module-augment-properties.c: Looking for .desktop file for pavucontrol
( 128.075| 0.150) D: [pulseaudio] module-stream-restore.c: Not restoring device for stream source-output-by-application-id:org.PulseAudio.pavucontrol, because already set
( 128.076| 0.000) D: [pulseaudio] module-intended-roles.c: Not setting device for stream Peak detect, because already set.
( 128.076| 0.000) D: [pulseaudio] source-output.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\""
( 128.076| 0.000) I: [pulseaudio] source-output.c: Trying to change sample rate
( 128.076| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for source output source-output-by-application-id:org.PulseAudio.pavucontrol.
( 128.076| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_01.1.hdmi-stereo becomes busy, resuming.
( 128.076| 0.000) D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_01.1.hdmi-stereo is 0x0000, resuming
( 128.076| 0.000) D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio0'
( 128.076| 0.000) I: [alsa-sink-HDMI 0] alsa-sink.c: Trying resume...
( 128.077| 0.000) D: [alsa-sink-HDMI 0] alsa-util.c: Maximum hw buffer size is 371 ms
( 128.078| 0.000) D: [alsa-sink-HDMI 0] alsa-util.c: Set buffer size first (to 4416 samples), period size second (to 736 samples).
( 128.078| 0.000) D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=0
( 128.078| 0.000) D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=1
( 128.078| 0.000) I: [alsa-sink-HDMI 0] alsa-sink.c: Resumed successfully...
( 128.078| 0.000) I: [alsa-sink-HDMI 0] alsa-sink.c: Starting playback.
( 128.078| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_01.1.hdmi-stereo becomes idle, timeout in 5 seconds.
( 128.078| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_01.1.hdmi-stereo becomes idle, timeout in 5 seconds.
( 128.078| 0.000) D: [pulseaudio] resampler.c: Channel matrix:
( 128.078| 0.000) D: [pulseaudio] resampler.c: I00 I01
( 128.078| 0.000) D: [pulseaudio] resampler.c: +------------
( 128.078| 0.000) D: [pulseaudio] resampler.c: O00 | 0.500 0.500
( 128.078| 0.000) I: [pulseaudio] remap.c: Using generic matrix remapping
( 128.078| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 128.078| 0.000) D: [pulseaudio] resampler.c: rate 44100 -> 25 (method peaks)
( 128.079| 0.000) D: [pulseaudio] resampler.c: format s16le -> float32le (intermediate s16le)
( 128.079| 0.000) D: [pulseaudio] resampler.c: channels 2 -> 1 (resampling 1)
( 128.079| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 128.079| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 128.079| 0.000) I: [pulseaudio] source-output.c: Created output 4 "Peak detect" on alsa_output.pci-0000_00_01.1.hdmi-stereo.monitor with sample spec float32le 1ch 25Hz and channel map mono
( 128.079| 0.000) I: [pulseaudio] source-output.c: media.name = "Peak detect"
( 128.079| 0.000) I: [pulseaudio] source-output.c: application.name = "PulseAudio Volume Control"
( 128.079| 0.000) I: [pulseaudio] source-output.c: native-protocol.peer = "UNIX socket client"
( 128.079| 0.000) I: [pulseaudio] source-output.c: native-protocol.version = "29"
( 128.079| 0.000) I: [pulseaudio] source-output.c: application.id = "org.PulseAudio.pavucontrol"
( 128.079| 0.000) I: [pulseaudio] source-output.c: application.icon_name = "audio-card"
( 128.079| 0.000) I: [pulseaudio] source-output.c: application.version = "2.0"
( 128.079| 0.000) I: [pulseaudio] source-output.c: application.process.id = "3910"
( 128.079| 0.000) I: [pulseaudio] source-output.c: application.process.user = "david"
( 128.079| 0.000) I: [pulseaudio] source-output.c: application.process.host = "fuileach"
( 128.079| 0.000) I: [pulseaudio] source-output.c: application.process.binary = "pavucontrol"
( 128.079| 0.000) I: [pulseaudio] source-output.c: application.language = "ga_IE.UTF-8"
( 128.079| 0.000) I: [pulseaudio] source-output.c: window.x11.display = ":0"
( 128.079| 0.000) I: [pulseaudio] source-output.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 128.079| 0.000) I: [pulseaudio] source-output.c: application.process.session_id = "1"
( 128.079| 0.000) I: [pulseaudio] source-output.c: module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
( 128.079| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0
( 128.079| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0
( 128.079| 0.000) I: [pulseaudio] protocol-native.c: Final latency 180.14 ms = 80.00 ms + 100.14 ms
( 128.079| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 128.080| 0.000) D: [pulseaudio] module-stream-restore.c: Not restoring device for stream source-output-by-application-id:org.PulseAudio.pavucontrol, because already set
( 128.080| 0.000) D: [pulseaudio] module-intended-roles.c: Not setting device for stream Peak detect, because already set.
( 128.080| 0.000) D: [pulseaudio] source-output.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\""
( 128.080| 0.000) I: [pulseaudio] source-output.c: Trying to change sample rate
( 128.080| 0.000) D: [pulseaudio] source.c: Suspending source alsa_output.pci-0000_00_14.2.analog-stereo.monitor due to changing the sample rate.
( 128.080| 0.000) D: [pulseaudio] sink.c: Suspending sink alsa_output.pci-0000_00_14.2.analog-stereo due to changing the sample rate.
( 128.080| 0.000) I: [pulseaudio] alsa-sink.c: Updating rate for device front:1, new rate is 44100
( 128.080| 0.000) I: [pulseaudio] sink.c: Changed sampling rate successfully
( 128.080| 0.000) I: [pulseaudio] source.c: Changed sampling rate successfully
( 128.080| 0.000) I: [pulseaudio] source-output.c: Rate changed to 44100 Hz
( 128.080| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for source output source-output-by-application-id:org.PulseAudio.pavucontrol.
( 128.080| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 128.080| 0.000) D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_14.2.analog-stereo is 0x0000, resuming
( 128.081| 0.000) D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio1'
( 128.081| 0.000) I: [alsa-sink-CX20756 Analog] alsa-sink.c: Trying resume...
( 128.082| 0.000) D: [alsa-sink-CX20756 Analog] alsa-util.c: Maximum hw buffer size is 371 ms
( 132.120| 4.038) D: [alsa-sink-CX20756 Analog] alsa-util.c: Set buffer size first (to 4416 samples), period size second (to 736 samples).
( 132.120| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: hwbuf_unused=0
( 132.120| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: setting avail_min=1
( 132.121| 0.000) I: [alsa-sink-CX20756 Analog] alsa-sink.c: Resumed successfully...
( 132.121| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 132.121| 0.000) I: [alsa-sink-CX20756 Analog] alsa-sink.c: Starting playback.
( 132.121| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 132.121| 0.000) D: [pulseaudio] resampler.c: Channel matrix:
( 132.121| 0.000) D: [pulseaudio] resampler.c: I00 I01
( 132.121| 0.000) D: [pulseaudio] resampler.c: +------------
( 132.121| 0.000) D: [pulseaudio] resampler.c: O00 | 0.500 0.500
( 132.121| 0.000) I: [pulseaudio] remap.c: Using generic matrix remapping
( 132.121| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 132.121| 0.000) D: [pulseaudio] resampler.c: rate 44100 -> 25 (method peaks)
( 132.121| 0.000) D: [pulseaudio] resampler.c: format s16le -> float32le (intermediate s16le)
( 132.121| 0.000) D: [pulseaudio] resampler.c: channels 2 -> 1 (resampling 1)
( 132.121| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 132.121| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 132.121| 0.000) I: [pulseaudio] source-output.c: Created output 5 "Peak detect" on alsa_output.pci-0000_00_14.2.analog-stereo.monitor with sample spec float32le 1ch 25Hz and channel map mono
( 132.121| 0.000) I: [pulseaudio] source-output.c: media.name = "Peak detect"
( 132.121| 0.000) I: [pulseaudio] source-output.c: application.name = "PulseAudio Volume Control"
( 132.121| 0.000) I: [pulseaudio] source-output.c: native-protocol.peer = "UNIX socket client"
( 132.121| 0.000) I: [pulseaudio] source-output.c: native-protocol.version = "29"
( 132.121| 0.000) I: [pulseaudio] source-output.c: application.id = "org.PulseAudio.pavucontrol"
( 132.121| 0.000) I: [pulseaudio] source-output.c: application.icon_name = "audio-card"
( 132.121| 0.000) I: [pulseaudio] source-output.c: application.version = "2.0"
( 132.121| 0.000) I: [pulseaudio] source-output.c: application.process.id = "3910"
( 132.121| 0.000) I: [pulseaudio] source-output.c: application.process.user = "david"
( 132.121| 0.000) I: [pulseaudio] source-output.c: application.process.host = "fuileach"
( 132.121| 0.000) I: [pulseaudio] source-output.c: application.process.binary = "pavucontrol"
( 132.121| 0.000) I: [pulseaudio] source-output.c: application.language = "ga_IE.UTF-8"
( 132.121| 0.000) I: [pulseaudio] source-output.c: window.x11.display = ":0"
( 132.121| 0.000) I: [pulseaudio] source-output.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 132.121| 0.000) I: [pulseaudio] source-output.c: application.process.session_id = "1"
( 132.121| 0.000) I: [pulseaudio] source-output.c: module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
( 132.122| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0
( 132.122| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0
( 132.122| 0.000) I: [pulseaudio] protocol-native.c: Final latency 180.14 ms = 80.00 ms + 100.14 ms
( 132.122| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 132.123| 0.001) D: [pulseaudio] module-stream-restore.c: Not restoring device for stream source-output-by-application-id:org.PulseAudio.pavucontrol, because already set
( 132.123| 0.000) D: [pulseaudio] module-intended-roles.c: Not setting device for stream Peak detect, because already set.
( 132.123| 0.000) D: [pulseaudio] source-output.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\""
( 132.123| 0.000) I: [pulseaudio] source-output.c: Trying to change sample rate
( 132.123| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for source output source-output-by-application-id:org.PulseAudio.pavucontrol.
( 132.123| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 132.123| 0.000) D: [pulseaudio] source.c: Suspend cause of source alsa_input.pci-0000_00_14.2.analog-stereo is 0x0000, resuming
( 132.124| 0.000) I: [alsa-source-CX20756 Analog] alsa-source.c: Trying resume...
( 132.124| 0.000) D: [alsa-source-CX20756 Analog] alsa-util.c: Maximum hw buffer size is 371 ms
( 132.124| 0.000) D: [alsa-source-CX20756 Analog] alsa-util.c: Set buffer size first (to 4416 samples), period size second (to 736 samples).
( 132.124| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: hwbuf_unused=0
( 132.124| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: setting avail_min=1
( 132.125| 0.000) I: [alsa-source-CX20756 Analog] alsa-source.c: Resumed successfully...
( 132.125| 0.000) I: [alsa-source-CX20756 Analog] alsa-source.c: Starting capture.
( 132.125| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 132.125| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 132.125| 0.000) D: [pulseaudio] resampler.c: Channel matrix:
( 132.125| 0.000) D: [pulseaudio] resampler.c: I00 I01
( 132.125| 0.000) D: [pulseaudio] resampler.c: +------------
( 132.125| 0.000) D: [pulseaudio] resampler.c: O00 | 0.500 0.500
( 132.125| 0.000) I: [pulseaudio] remap.c: Using generic matrix remapping
( 132.125| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 132.125| 0.000) D: [pulseaudio] resampler.c: rate 44100 -> 25 (method peaks)
( 132.125| 0.000) D: [pulseaudio] resampler.c: format s16le -> float32le (intermediate s16le)
( 132.125| 0.000) D: [pulseaudio] resampler.c: channels 2 -> 1 (resampling 1)
( 132.125| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 132.125| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 132.125| 0.000) I: [pulseaudio] source-output.c: Created output 6 "Peak detect" on alsa_input.pci-0000_00_14.2.analog-stereo with sample spec float32le 1ch 25Hz and channel map mono
( 132.125| 0.000) I: [pulseaudio] source-output.c: media.name = "Peak detect"
( 132.125| 0.000) I: [pulseaudio] source-output.c: application.name = "PulseAudio Volume Control"
( 132.125| 0.000) I: [pulseaudio] source-output.c: native-protocol.peer = "UNIX socket client"
( 132.125| 0.000) I: [pulseaudio] source-output.c: native-protocol.version = "29"
( 132.125| 0.000) I: [pulseaudio] source-output.c: application.id = "org.PulseAudio.pavucontrol"
( 132.125| 0.000) I: [pulseaudio] source-output.c: application.icon_name = "audio-card"
( 132.125| 0.000) I: [pulseaudio] source-output.c: application.version = "2.0"
( 132.125| 0.000) I: [pulseaudio] source-output.c: application.process.id = "3910"
( 132.125| 0.000) I: [pulseaudio] source-output.c: application.process.user = "david"
( 132.125| 0.000) I: [pulseaudio] source-output.c: application.process.host = "fuileach"
( 132.125| 0.000) I: [pulseaudio] source-output.c: application.process.binary = "pavucontrol"
( 132.125| 0.000) I: [pulseaudio] source-output.c: application.language = "ga_IE.UTF-8"
( 132.125| 0.000) I: [pulseaudio] source-output.c: window.x11.display = ":0"
( 132.125| 0.000) I: [pulseaudio] source-output.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 132.125| 0.000) I: [pulseaudio] source-output.c: application.process.session_id = "1"
( 132.125| 0.000) I: [pulseaudio] source-output.c: module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
( 132.126| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0
( 132.126| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0
( 132.126| 0.000) I: [pulseaudio] protocol-native.c: Final latency 180.14 ms = 80.00 ms + 100.14 ms
( 132.126| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: Requested volume: front-left: 44205 / 67% / -10.26 dB, front-right: 44205 / 67% / -10.26 dB
( 132.126| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: Got hardware volume: front-left: 41350 / 63% / -12.00 dB, front-right: 41350 / 63% / -12.00 dB
( 132.126| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: Calculated software volume: front-left: 70061 / 107% / 1.74 dB, front-right: 70061 / 107% / 1.74 dB (accurate-enough=no)
( 132.126| 0.000) D: [alsa-source-CX20756 Analog] source.c: Volume not changing
( 132.126| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 133.616| 1.490) I: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-application-name:AudioStream.
( 133.616| 0.000) D: [pulseaudio] module-intended-roles.c: Not setting device for stream AudioStream, because already set.
( 133.616| 0.000) D: [pulseaudio] sink-input.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "48000" format.channels = "1" format.channel_map = "\"mono\""
( 133.616| 0.000) I: [pulseaudio] sink-input.c: Trying to change sample rate
( 133.616| 0.000) I: [pulseaudio] sink.c: Cannot update rate, monitor source is RUNNING
( 133.616| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring volume for sink input sink-input-by-application-name:AudioStream.
( 133.616| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for sink input sink-input-by-application-name:AudioStream.
( 133.617| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 133.617| 0.000) D: [pulseaudio] resampler.c: Channel matrix:
( 133.617| 0.000) D: [pulseaudio] resampler.c: I00
( 133.617| 0.000) D: [pulseaudio] resampler.c: +------
( 133.617| 0.000) D: [pulseaudio] resampler.c: O00 | 1.000
( 133.617| 0.000) D: [pulseaudio] resampler.c: O01 | 1.000
( 133.617| 0.000) I: [pulseaudio] remap_sse.c: Using SSE2 mono to stereo remapping
( 133.617| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 133.617| 0.000) D: [pulseaudio] resampler.c: rate 48000 -> 44100 (method speex-float-1)
( 133.617| 0.000) D: [pulseaudio] resampler.c: format float32le -> s16le (intermediate float32le)
( 133.617| 0.000) D: [pulseaudio] resampler.c: channels 1 -> 2 (resampling 1)
( 133.617| 0.000) I: [pulseaudio] resampler.c: Choosing speex quality setting 1.
( 133.617| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 133.617| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 133.617| 0.000) I: [pulseaudio] sink-input.c: Created input 8 "AudioStream" on alsa_output.pci-0000_00_14.2.analog-stereo with sample spec float32le 1ch 48000Hz and channel map mono
( 133.617| 0.000) I: [pulseaudio] sink-input.c: media.name = "AudioStream"
( 133.617| 0.000) I: [pulseaudio] sink-input.c: application.name = "AudioStream"
( 133.617| 0.000) I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
( 133.617| 0.000) I: [pulseaudio] sink-input.c: native-protocol.version = "29"
( 133.617| 0.000) I: [pulseaudio] sink-input.c: application.process.id = "4321"
( 133.617| 0.000) I: [pulseaudio] sink-input.c: application.process.user = "david"
( 133.617| 0.000) I: [pulseaudio] sink-input.c: application.process.host = "fuileach"
( 133.617| 0.000) I: [pulseaudio] sink-input.c: application.process.binary = "iceweasel"
( 133.617| 0.000) I: [pulseaudio] sink-input.c: window.x11.display = ":0"
( 133.617| 0.000) I: [pulseaudio] sink-input.c: application.language = "ga_IE.UTF-8"
( 133.617| 0.000) I: [pulseaudio] sink-input.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 133.617| 0.000) I: [pulseaudio] sink-input.c: application.process.session_id = "1"
( 133.617| 0.000) I: [pulseaudio] sink-input.c: application.icon_name = "iceweasel"
( 133.617| 0.000) I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-application-name:AudioStream"
( 133.617| 0.000) I: [pulseaudio] protocol-native.c: Requested tlength=100.00 ms, minreq=25.00 ms
( 133.617| 0.000) D: [pulseaudio] protocol-native.c: Traditional mode enabled, modifying sink usec only for compat with minreq.
( 133.618| 0.000) D: [pulseaudio] protocol-native.c: Requested latency=50.00 ms, Received latency=100.14 ms
( 133.618| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=28828, base=4, prebuf=24032, minreq=4800 maxrewind=0
( 133.618| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=28828, base=4, prebuf=24032, minreq=4800 maxrewind=0
( 133.618| 0.000) I: [pulseaudio] protocol-native.c: Final latency 250.28 ms = 100.14 ms + 2*25.00 ms + 100.14 ms
( 133.618| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 30401 / 46% / -20.02 dB, front-right: 30401 / 46% / -20.02 dB
( 133.618| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 30419 / 46% / -20.00 dB, front-right: 30419 / 46% / -20.00 dB
( 133.618| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65497 / 100% / -0.02 dB, front-right: 65497 / 100% / -0.02 dB (accurate-enough=yes)
( 133.618| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume not changing
( 133.618| 0.000) D: [alsa-sink-CX20756 Analog] protocol-native.c: Requesting rewind due to end of underrun.
( 133.625| 0.007) I: [pulseaudio] sink.c: Cannot update rate, monitor source is RUNNING
( 133.626| 0.000) D: [alsa-sink-CX20756 Analog] protocol-native.c: Requesting rewind due to end of underrun.
( 133.626| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Requesting rewind due to uncorking
( 133.626| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 133.626| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 17372 bytes.
( 133.626| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 4343
( 133.626| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 133.626| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 4343
( 133.626| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 17372 bytes.
( 133.626| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 133.626| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 0
( 133.626| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 133.643| 0.016) D: [pulseaudio] module-intended-roles.c: Not setting device for stream Peak detect, because already set.
( 133.643| 0.000) D: [pulseaudio] source-output.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\""
( 133.643| 0.000) I: [pulseaudio] source-output.c: Trying to change sample rate
( 133.643| 0.000) I: [pulseaudio] source.c: Cannot update rate, SOURCE_IS_RUNNING, will keep using 44100 Hz
( 133.643| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for source output source-output-by-application-id:org.PulseAudio.pavucontrol.
( 133.643| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 133.643| 0.000) D: [pulseaudio] resampler.c: Channel matrix:
( 133.643| 0.000) D: [pulseaudio] resampler.c: I00 I01
( 133.643| 0.000) D: [pulseaudio] resampler.c: +------------
( 133.643| 0.000) D: [pulseaudio] resampler.c: O00 | 0.500 0.500
( 133.643| 0.000) I: [pulseaudio] remap.c: Using generic matrix remapping
( 133.643| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 133.643| 0.000) D: [pulseaudio] resampler.c: rate 44100 -> 25 (method peaks)
( 133.643| 0.000) D: [pulseaudio] resampler.c: format s16le -> float32le (intermediate s16le)
( 133.643| 0.000) D: [pulseaudio] resampler.c: channels 2 -> 1 (resampling 1)
( 133.643| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 133.643| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 133.643| 0.000) I: [pulseaudio] source-output.c: Created output 7 "Peak detect" on alsa_output.pci-0000_00_14.2.analog-stereo.monitor with sample spec float32le 1ch 25Hz and channel map mono
( 133.643| 0.000) I: [pulseaudio] source-output.c: media.name = "Peak detect"
( 133.643| 0.000) I: [pulseaudio] source-output.c: application.name = "PulseAudio Volume Control"
( 133.643| 0.000) I: [pulseaudio] source-output.c: native-protocol.peer = "UNIX socket client"
( 133.643| 0.000) I: [pulseaudio] source-output.c: native-protocol.version = "29"
( 133.643| 0.000) I: [pulseaudio] source-output.c: application.id = "org.PulseAudio.pavucontrol"
( 133.643| 0.000) I: [pulseaudio] source-output.c: application.icon_name = "audio-card"
( 133.643| 0.000) I: [pulseaudio] source-output.c: application.version = "2.0"
( 133.643| 0.000) I: [pulseaudio] source-output.c: application.process.id = "3910"
( 133.643| 0.000) I: [pulseaudio] source-output.c: application.process.user = "david"
( 133.643| 0.000) I: [pulseaudio] source-output.c: application.process.host = "fuileach"
( 133.643| 0.000) I: [pulseaudio] source-output.c: application.process.binary = "pavucontrol"
( 133.643| 0.000) I: [pulseaudio] source-output.c: application.language = "ga_IE.UTF-8"
( 133.643| 0.000) I: [pulseaudio] source-output.c: window.x11.display = ":0"
( 133.643| 0.000) I: [pulseaudio] source-output.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 133.643| 0.000) I: [pulseaudio] source-output.c: application.process.session_id = "1"
( 133.643| 0.000) I: [pulseaudio] source-output.c: module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
( 133.644| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0
( 133.644| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0
( 133.644| 0.000) I: [pulseaudio] protocol-native.c: Final latency 180.14 ms = 80.00 ms + 100.14 ms
( 140.701| 7.056) D: [alsa-sink-CX20756 Analog] sink-input.c: Requesting rewind due to corking
( 140.701| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 140.701| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 17364 bytes.
( 140.701| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 4341
( 140.701| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 4341
( 140.701| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 17364 bytes.
( 140.701| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 140.701| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 0
( 140.701| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Have to rewind 17364 bytes on render memblockq.
( 140.701| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Have to rewind 18904 bytes on implementor.
( 140.701| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 140.702| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17592 bytes ago (72 bytes ahead in playback buffer)
( 140.702| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17648 bytes ago (12 bytes ahead in playback buffer)
( 140.704| 0.001) I: [pulseaudio] source-output.c: Freeing output 7 "Peak detect"
( 140.704| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 30401 / 46% / -20.02 dB, front-right: 30401 / 46% / -20.02 dB
( 140.704| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 30419 / 46% / -20.00 dB, front-right: 30419 / 46% / -20.00 dB
( 140.704| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65497 / 100% / -0.02 dB, front-right: 65497 / 100% / -0.02 dB (accurate-enough=yes)
( 140.704| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume not changing
( 140.704| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 140.704| 0.000) I: [pulseaudio] sink-input.c: Freeing input 8 "AudioStream"
( 140.704| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 17348 bytes.
( 140.704| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 4337
( 140.704| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 4337
( 140.704| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 17348 bytes.
( 140.704| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 140.704| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 0
( 140.704| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 142.669| 1.964) I: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-application-name:AudioStream.
( 142.669| 0.000) D: [pulseaudio] module-intended-roles.c: Not setting device for stream AudioStream, because already set.
( 142.669| 0.000) D: [pulseaudio] sink-input.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "48000" format.channels = "1" format.channel_map = "\"mono\""
( 142.669| 0.000) I: [pulseaudio] sink-input.c: Trying to change sample rate
( 142.669| 0.000) I: [pulseaudio] sink.c: Cannot update rate, monitor source is RUNNING
( 142.669| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring volume for sink input sink-input-by-application-name:AudioStream.
( 142.669| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for sink input sink-input-by-application-name:AudioStream.
( 142.669| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 142.669| 0.000) D: [pulseaudio] resampler.c: Channel matrix:
( 142.669| 0.000) D: [pulseaudio] resampler.c: I00
( 142.669| 0.000) D: [pulseaudio] resampler.c: +------
( 142.669| 0.000) D: [pulseaudio] resampler.c: O00 | 1.000
( 142.669| 0.000) D: [pulseaudio] resampler.c: O01 | 1.000
( 142.669| 0.000) I: [pulseaudio] remap_sse.c: Using SSE2 mono to stereo remapping
( 142.669| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 142.669| 0.000) D: [pulseaudio] resampler.c: rate 48000 -> 44100 (method speex-float-1)
( 142.669| 0.000) D: [pulseaudio] resampler.c: format float32le -> s16le (intermediate float32le)
( 142.669| 0.000) D: [pulseaudio] resampler.c: channels 1 -> 2 (resampling 1)
( 142.670| 0.000) I: [pulseaudio] resampler.c: Choosing speex quality setting 1.
( 142.670| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 142.670| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 142.670| 0.000) I: [pulseaudio] sink-input.c: Created input 9 "AudioStream" on alsa_output.pci-0000_00_14.2.analog-stereo with sample spec float32le 1ch 48000Hz and channel map mono
( 142.670| 0.000) I: [pulseaudio] sink-input.c: media.name = "AudioStream"
( 142.670| 0.000) I: [pulseaudio] sink-input.c: application.name = "AudioStream"
( 142.670| 0.000) I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
( 142.670| 0.000) I: [pulseaudio] sink-input.c: native-protocol.version = "29"
( 142.670| 0.000) I: [pulseaudio] sink-input.c: application.process.id = "4321"
( 142.670| 0.000) I: [pulseaudio] sink-input.c: application.process.user = "david"
( 142.670| 0.000) I: [pulseaudio] sink-input.c: application.process.host = "fuileach"
( 142.670| 0.000) I: [pulseaudio] sink-input.c: application.process.binary = "iceweasel"
( 142.670| 0.000) I: [pulseaudio] sink-input.c: window.x11.display = ":0"
( 142.670| 0.000) I: [pulseaudio] sink-input.c: application.language = "ga_IE.UTF-8"
( 142.670| 0.000) I: [pulseaudio] sink-input.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 142.670| 0.000) I: [pulseaudio] sink-input.c: application.process.session_id = "1"
( 142.670| 0.000) I: [pulseaudio] sink-input.c: application.icon_name = "iceweasel"
( 142.670| 0.000) I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-application-name:AudioStream"
( 142.670| 0.000) I: [pulseaudio] protocol-native.c: Requested tlength=100.00 ms, minreq=25.00 ms
( 142.670| 0.000) D: [pulseaudio] protocol-native.c: Traditional mode enabled, modifying sink usec only for compat with minreq.
( 142.670| 0.000) D: [pulseaudio] protocol-native.c: Requested latency=50.00 ms, Received latency=100.14 ms
( 142.670| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=28828, base=4, prebuf=24032, minreq=4800 maxrewind=0
( 142.671| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=28828, base=4, prebuf=24032, minreq=4800 maxrewind=0
( 142.671| 0.000) I: [pulseaudio] protocol-native.c: Final latency 250.28 ms = 100.14 ms + 2*25.00 ms + 100.14 ms
( 142.671| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 30401 / 46% / -20.02 dB, front-right: 30401 / 46% / -20.02 dB
( 142.671| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 30419 / 46% / -20.00 dB, front-right: 30419 / 46% / -20.00 dB
( 142.671| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65497 / 100% / -0.02 dB, front-right: 65497 / 100% / -0.02 dB (accurate-enough=yes)
( 142.671| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume not changing
( 142.671| 0.000) D: [alsa-sink-CX20756 Analog] protocol-native.c: Requesting rewind due to end of underrun.
( 142.683| 0.011) I: [pulseaudio] sink.c: Cannot update rate, monitor source is RUNNING
( 142.683| 0.000) D: [alsa-sink-CX20756 Analog] protocol-native.c: Requesting rewind due to end of underrun.
( 142.683| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Requesting rewind due to uncorking
( 142.683| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 142.683| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 142.683| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 17384 bytes.
( 142.683| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 4346
( 142.683| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 4346
( 142.683| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 17384 bytes.
( 142.683| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 142.683| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 0
( 142.683| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 142.690| 0.007) D: [pulseaudio] module-intended-roles.c: Not setting device for stream Peak detect, because already set.
( 142.690| 0.000) D: [pulseaudio] source-output.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\""
( 142.690| 0.000) I: [pulseaudio] source-output.c: Trying to change sample rate
( 142.690| 0.000) I: [pulseaudio] source.c: Cannot update rate, SOURCE_IS_RUNNING, will keep using 44100 Hz
( 142.690| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for source output source-output-by-application-id:org.PulseAudio.pavucontrol.
( 142.690| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 142.690| 0.000) D: [pulseaudio] resampler.c: Channel matrix:
( 142.690| 0.000) D: [pulseaudio] resampler.c: I00 I01
( 142.690| 0.000) D: [pulseaudio] resampler.c: +------------
( 142.690| 0.000) D: [pulseaudio] resampler.c: O00 | 0.500 0.500
( 142.690| 0.000) I: [pulseaudio] remap.c: Using generic matrix remapping
( 142.690| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 142.690| 0.000) D: [pulseaudio] resampler.c: rate 44100 -> 25 (method peaks)
( 142.690| 0.000) D: [pulseaudio] resampler.c: format s16le -> float32le (intermediate s16le)
( 142.690| 0.000) D: [pulseaudio] resampler.c: channels 2 -> 1 (resampling 1)
( 142.690| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 142.690| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 142.690| 0.000) I: [pulseaudio] source-output.c: Created output 8 "Peak detect" on alsa_output.pci-0000_00_14.2.analog-stereo.monitor with sample spec float32le 1ch 25Hz and channel map mono
( 142.690| 0.000) I: [pulseaudio] source-output.c: media.name = "Peak detect"
( 142.690| 0.000) I: [pulseaudio] source-output.c: application.name = "PulseAudio Volume Control"
( 142.690| 0.000) I: [pulseaudio] source-output.c: native-protocol.peer = "UNIX socket client"
( 142.690| 0.000) I: [pulseaudio] source-output.c: native-protocol.version = "29"
( 142.690| 0.000) I: [pulseaudio] source-output.c: application.id = "org.PulseAudio.pavucontrol"
( 142.690| 0.000) I: [pulseaudio] source-output.c: application.icon_name = "audio-card"
( 142.690| 0.000) I: [pulseaudio] source-output.c: application.version = "2.0"
( 142.690| 0.000) I: [pulseaudio] source-output.c: application.process.id = "3910"
( 142.690| 0.000) I: [pulseaudio] source-output.c: application.process.user = "david"
( 142.690| 0.000) I: [pulseaudio] source-output.c: application.process.host = "fuileach"
( 142.690| 0.000) I: [pulseaudio] source-output.c: application.process.binary = "pavucontrol"
( 142.690| 0.000) I: [pulseaudio] source-output.c: application.language = "ga_IE.UTF-8"
( 142.690| 0.000) I: [pulseaudio] source-output.c: window.x11.display = ":0"
( 142.690| 0.000) I: [pulseaudio] source-output.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 142.690| 0.000) I: [pulseaudio] source-output.c: application.process.session_id = "1"
( 142.690| 0.000) I: [pulseaudio] source-output.c: module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
( 142.691| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0
( 142.691| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0
( 142.691| 0.000) I: [pulseaudio] protocol-native.c: Final latency 180.14 ms = 80.00 ms + 100.14 ms
( 151.554| 8.863) D: [alsa-sink-CX20756 Analog] sink-input.c: Requesting rewind due to corking
( 151.554| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 151.555| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 17356 bytes.
( 151.555| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 4339
( 151.555| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 4339
( 151.555| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 17356 bytes.
( 151.555| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 151.555| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 0
( 151.555| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Have to rewind 17356 bytes on render memblockq.
( 151.555| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Have to rewind 18896 bytes on implementor.
( 151.555| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 151.558| 0.002) I: [pulseaudio] source-output.c: Freeing output 8 "Peak detect"
( 151.558| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 30401 / 46% / -20.02 dB, front-right: 30401 / 46% / -20.02 dB
( 151.558| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 30419 / 46% / -20.00 dB, front-right: 30419 / 46% / -20.00 dB
( 151.558| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65497 / 100% / -0.02 dB, front-right: 65497 / 100% / -0.02 dB (accurate-enough=yes)
( 151.559| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume not changing
( 151.559| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 151.559| 0.000) I: [pulseaudio] sink-input.c: Freeing input 9 "AudioStream"
( 151.559| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 17328 bytes.
( 151.559| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 4332
( 151.559| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 4332
( 151.559| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 17328 bytes.
( 151.559| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 151.559| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 0
( 151.559| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 160.858| 9.299) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_01.1.hdmi-stereo becomes idle, timeout in 5 seconds.
( 160.858| 0.000) I: [pulseaudio] source-output.c: Freeing output 4 "Peak detect"
( 160.859| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 160.859| 0.000) I: [pulseaudio] source-output.c: Freeing output 5 "Peak detect"
( 160.859| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: Requested volume: front-left: 44205 / 67% / -10.26 dB, front-right: 44205 / 67% / -10.26 dB
( 160.859| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: Got hardware volume: front-left: 41350 / 63% / -12.00 dB, front-right: 41350 / 63% / -12.00 dB
( 160.859| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: Calculated software volume: front-left: 70061 / 107% / 1.74 dB, front-right: 70061 / 107% / 1.74 dB (accurate-enough=no)
( 160.859| 0.000) D: [alsa-source-CX20756 Analog] source.c: Volume not changing
( 160.859| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 160.859| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 160.859| 0.000) D: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
( 160.867| 0.007) I: [pulseaudio] source-output.c: Freeing output 6 "Peak detect"
( 160.867| 0.000) I: [pulseaudio] client.c: Freed 8 "PulseAudio Volume Control"
( 160.867| 0.000) I: [pulseaudio] protocol-native.c: Connection died.
( 165.859| 4.991) I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo idle for too long, suspending ...
( 165.859| 0.000) D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_14.2.analog-stereo is 0x0004, suspending
( 165.860| 0.000) I: [alsa-sink-CX20756 Analog] alsa-sink.c: Device suspended...
( 165.860| 0.000) D: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
( 165.871| 0.011) I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_01.1.hdmi-stereo idle for too long, suspending ...
( 165.871| 0.000) D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_01.1.hdmi-stereo is 0x0004, suspending
( 165.873| 0.001) I: [alsa-sink-HDMI 0] alsa-sink.c: Device suspended...
( 165.873| 0.000) D: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
( 165.880| 0.007) I: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_14.2.analog-stereo idle for too long, suspending ...
( 165.881| 0.000) D: [pulseaudio] source.c: Suspend cause of source alsa_input.pci-0000_00_14.2.analog-stereo is 0x0004, suspending
( 165.882| 0.001) I: [alsa-source-CX20756 Analog] alsa-source.c: Device suspended...
( 165.882| 0.000) D: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
( 165.890| 0.007) D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
( 165.890| 0.000) D: [pulseaudio] module-udev-detect.c: Resuming all sinks and sources of card alsa_card.pci-0000_00_01.1.
( 165.890| 0.000) D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC1 is accessible: yes
( 165.890| 0.000) D: [pulseaudio] module-udev-detect.c: Resuming all sinks and sources of card alsa_card.pci-0000_00_14.2.
( 169.917| 4.027) I: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-application-name:AudioStream.
( 169.917| 0.000) D: [pulseaudio] module-intended-roles.c: Not setting device for stream AudioStream, because already set.
( 169.917| 0.000) D: [pulseaudio] sink-input.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "48000" format.channels = "1" format.channel_map = "\"mono\""
( 169.917| 0.000) I: [pulseaudio] sink-input.c: Trying to change sample rate
( 169.917| 0.000) D: [pulseaudio] sink.c: Suspending sink alsa_output.pci-0000_00_14.2.analog-stereo due to changing the sample rate.
( 169.917| 0.000) I: [pulseaudio] alsa-sink.c: Updating rate for device front:1, new rate is 48000
( 169.917| 0.000) D: [pulseaudio] source.c: Suspending source alsa_output.pci-0000_00_14.2.analog-stereo.monitor due to changing the sample rate.
( 169.917| 0.000) I: [pulseaudio] source.c: Changed sampling rate successfully
( 169.918| 0.000) I: [pulseaudio] sink.c: Changed sampling rate successfully
( 169.918| 0.000) I: [pulseaudio] sink-input.c: Rate changed to 48000 Hz
( 169.918| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring volume for sink input sink-input-by-application-name:AudioStream.
( 169.918| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for sink input sink-input-by-application-name:AudioStream.
( 169.918| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 169.918| 0.000) D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_14.2.analog-stereo is 0x0000, resuming
( 169.919| 0.000) D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio1'
( 169.919| 0.000) I: [alsa-sink-CX20756 Analog] alsa-sink.c: Trying resume...
( 169.920| 0.001) D: [alsa-sink-CX20756 Analog] alsa-util.c: Maximum hw buffer size is 341 ms
( 173.952| 4.032) D: [alsa-sink-CX20756 Analog] alsa-util.c: Set buffer size first (to 4416 samples), period size second (to 736 samples).
( 173.952| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: hwbuf_unused=0
( 173.953| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: setting avail_min=1
( 173.953| 0.000) I: [alsa-sink-CX20756 Analog] alsa-sink.c: Resumed successfully...
( 173.953| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 173.953| 0.000) I: [alsa-sink-CX20756 Analog] alsa-sink.c: Starting playback.
( 173.953| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 173.953| 0.000) I: [pulseaudio] resampler.c: Forcing resampler 'copy', because of fixed, identical sample rates.
( 173.953| 0.000) D: [pulseaudio] resampler.c: Channel matrix:
( 173.953| 0.000) D: [pulseaudio] resampler.c: I00
( 173.953| 0.000) D: [pulseaudio] resampler.c: +------
( 173.953| 0.000) D: [pulseaudio] resampler.c: O00 | 1.000
( 173.953| 0.000) D: [pulseaudio] resampler.c: O01 | 1.000
( 173.953| 0.000) I: [pulseaudio] remap_sse.c: Using SSE2 mono to stereo remapping
( 173.953| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 173.953| 0.000) D: [pulseaudio] resampler.c: rate 48000 -> 48000 (method copy)
( 173.953| 0.000) D: [pulseaudio] resampler.c: format float32le -> s16le (intermediate s16le)
( 173.953| 0.000) D: [pulseaudio] resampler.c: channels 1 -> 2 (resampling 1)
( 173.953| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 173.953| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 173.953| 0.000) I: [pulseaudio] sink-input.c: Created input 10 "AudioStream" on alsa_output.pci-0000_00_14.2.analog-stereo with sample spec float32le 1ch 48000Hz and channel map mono
( 173.953| 0.000) I: [pulseaudio] sink-input.c: media.name = "AudioStream"
( 173.953| 0.000) I: [pulseaudio] sink-input.c: application.name = "AudioStream"
( 173.953| 0.000) I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
( 173.953| 0.000) I: [pulseaudio] sink-input.c: native-protocol.version = "29"
( 173.953| 0.000) I: [pulseaudio] sink-input.c: application.process.id = "4321"
( 173.953| 0.000) I: [pulseaudio] sink-input.c: application.process.user = "david"
( 173.953| 0.000) I: [pulseaudio] sink-input.c: application.process.host = "fuileach"
( 173.953| 0.000) I: [pulseaudio] sink-input.c: application.process.binary = "iceweasel"
( 173.953| 0.000) I: [pulseaudio] sink-input.c: window.x11.display = ":0"
( 173.953| 0.000) I: [pulseaudio] sink-input.c: application.language = "ga_IE.UTF-8"
( 173.953| 0.000) I: [pulseaudio] sink-input.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 173.953| 0.000) I: [pulseaudio] sink-input.c: application.process.session_id = "1"
( 173.953| 0.000) I: [pulseaudio] sink-input.c: application.icon_name = "iceweasel"
( 173.953| 0.000) I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-application-name:AudioStream"
( 173.953| 0.000) I: [pulseaudio] protocol-native.c: Requested tlength=100.00 ms, minreq=25.00 ms
( 173.953| 0.000) D: [pulseaudio] protocol-native.c: Traditional mode enabled, modifying sink usec only for compat with minreq.
( 173.954| 0.000) D: [pulseaudio] protocol-native.c: Requested latency=50.00 ms, Received latency=100.14 ms
( 173.954| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=28828, base=4, prebuf=24032, minreq=4800 maxrewind=0
( 173.954| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=28828, base=4, prebuf=24032, minreq=4800 maxrewind=0
( 173.954| 0.000) I: [pulseaudio] protocol-native.c: Final latency 250.28 ms = 100.14 ms + 2*25.00 ms + 100.14 ms
( 173.954| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 30401 / 46% / -20.02 dB, front-right: 30401 / 46% / -20.02 dB
( 173.954| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 30419 / 46% / -20.00 dB, front-right: 30419 / 46% / -20.00 dB
( 173.954| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65497 / 100% / -0.02 dB, front-right: 65497 / 100% / -0.02 dB (accurate-enough=yes)
( 173.954| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume not changing
( 173.954| 0.000) D: [alsa-sink-CX20756 Analog] protocol-native.c: Requesting rewind due to end of underrun.
( 173.956| 0.001) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 30401 / 46% / -20.02 dB, front-right: 30401 / 46% / -20.02 dB
( 173.956| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 30419 / 46% / -20.00 dB, front-right: 30419 / 46% / -20.00 dB
( 173.956| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65497 / 100% / -0.02 dB, front-right: 65497 / 100% / -0.02 dB (accurate-enough=yes)
( 173.956| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume not changing
( 173.956| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 173.956| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 173.956| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 17364 bytes.
( 173.956| 0.000) D: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
( 173.956| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 4341
( 173.956| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 4341
( 173.956| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 17364 bytes.
( 173.956| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 173.956| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 1182
( 173.956| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 173.960| 0.003) I: [pulseaudio] sink-input.c: Freeing input 10 "AudioStream"
( 173.982| 0.022) I: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-application-name:AudioStream.
( 173.982| 0.000) D: [pulseaudio] module-intended-roles.c: Not setting device for stream AudioStream, because already set.
( 173.982| 0.000) D: [pulseaudio] sink-input.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "48000" format.channels = "1" format.channel_map = "\"mono\""
( 173.982| 0.000) I: [pulseaudio] sink-input.c: Trying to change sample rate
( 173.982| 0.000) I: [pulseaudio] sink-input.c: Rate changed to 48000 Hz
( 173.982| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring volume for sink input sink-input-by-application-name:AudioStream.
( 173.982| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for sink input sink-input-by-application-name:AudioStream.
( 173.982| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 173.982| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 173.982| 0.000) I: [pulseaudio] resampler.c: Forcing resampler 'copy', because of fixed, identical sample rates.
( 173.983| 0.000) D: [pulseaudio] resampler.c: Channel matrix:
( 173.983| 0.000) D: [pulseaudio] resampler.c: I00
( 173.983| 0.000) D: [pulseaudio] resampler.c: +------
( 173.983| 0.000) D: [pulseaudio] resampler.c: O00 | 1.000
( 173.983| 0.000) D: [pulseaudio] resampler.c: O01 | 1.000
( 173.983| 0.000) I: [pulseaudio] remap_sse.c: Using SSE2 mono to stereo remapping
( 173.983| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 173.983| 0.000) D: [pulseaudio] resampler.c: rate 48000 -> 48000 (method copy)
( 173.983| 0.000) D: [pulseaudio] resampler.c: format float32le -> s16le (intermediate s16le)
( 173.983| 0.000) D: [pulseaudio] resampler.c: channels 1 -> 2 (resampling 1)
( 173.983| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 173.983| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 173.983| 0.000) I: [pulseaudio] sink-input.c: Created input 11 "AudioStream" on alsa_output.pci-0000_00_14.2.analog-stereo with sample spec float32le 1ch 48000Hz and channel map mono
( 173.983| 0.000) I: [pulseaudio] sink-input.c: media.name = "AudioStream"
( 173.983| 0.000) I: [pulseaudio] sink-input.c: application.name = "AudioStream"
( 173.983| 0.000) I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
( 173.983| 0.000) I: [pulseaudio] sink-input.c: native-protocol.version = "29"
( 173.983| 0.000) I: [pulseaudio] sink-input.c: application.process.id = "4321"
( 173.983| 0.000) I: [pulseaudio] sink-input.c: application.process.user = "david"
( 173.983| 0.000) I: [pulseaudio] sink-input.c: application.process.host = "fuileach"
( 173.983| 0.000) I: [pulseaudio] sink-input.c: application.process.binary = "iceweasel"
( 173.983| 0.000) I: [pulseaudio] sink-input.c: window.x11.display = ":0"
( 173.983| 0.000) I: [pulseaudio] sink-input.c: application.language = "ga_IE.UTF-8"
( 173.983| 0.000) I: [pulseaudio] sink-input.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 173.983| 0.000) I: [pulseaudio] sink-input.c: application.process.session_id = "1"
( 173.983| 0.000) I: [pulseaudio] sink-input.c: application.icon_name = "iceweasel"
( 173.983| 0.000) I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-application-name:AudioStream"
( 173.984| 0.000) I: [pulseaudio] protocol-native.c: Requested tlength=100.00 ms, minreq=25.00 ms
( 173.984| 0.000) D: [pulseaudio] protocol-native.c: Traditional mode enabled, modifying sink usec only for compat with minreq.
( 173.984| 0.000) D: [pulseaudio] protocol-native.c: Requested latency=50.00 ms, Received latency=100.14 ms
( 173.984| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=28828, base=4, prebuf=24032, minreq=4800 maxrewind=0
( 173.984| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=28828, base=4, prebuf=24032, minreq=4800 maxrewind=0
( 173.984| 0.000) I: [pulseaudio] protocol-native.c: Final latency 250.28 ms = 100.14 ms + 2*25.00 ms + 100.14 ms
( 173.984| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 30401 / 46% / -20.02 dB, front-right: 30401 / 46% / -20.02 dB
( 173.984| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 30419 / 46% / -20.00 dB, front-right: 30419 / 46% / -20.00 dB
( 173.984| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65497 / 100% / -0.02 dB, front-right: 65497 / 100% / -0.02 dB (accurate-enough=yes)
( 173.984| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume not changing
( 173.987| 0.002) D: [alsa-sink-CX20756 Analog] protocol-native.c: Requesting rewind due to end of underrun.
( 173.989| 0.002) D: [alsa-sink-CX20756 Analog] protocol-native.c: Requesting rewind due to end of underrun.
( 173.989| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Requesting rewind due to uncorking
( 173.989| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 173.989| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 17380 bytes.
( 173.989| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 173.989| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 4345
( 173.989| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 4345
( 173.989| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 17380 bytes.
( 173.989| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 173.989| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 1160
( 173.989| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 190.066| 16.076) D: [alsa-sink-CX20756 Analog] sink-input.c: Requesting rewind due to corking
( 190.113| 0.047) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 190.113| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 8252 bytes.
( 190.113| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 2063
( 190.113| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 2063
( 190.113| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 8252 bytes.
( 190.113| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 190.113| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 30428
( 190.113| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Have to rewind 8252 bytes on render memblockq.
( 190.113| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Have to rewind 8252 bytes on implementor.
( 190.114| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 190.114| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17488 bytes ago (176 bytes ahead in playback buffer)
( 190.114| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 190.114| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17500 bytes ago (164 bytes ahead in playback buffer)
( 190.114| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17548 bytes ago (116 bytes ahead in playback buffer)
( 190.114| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17560 bytes ago (104 bytes ahead in playback buffer)
( 190.114| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17576 bytes ago (88 bytes ahead in playback buffer)
( 190.114| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17588 bytes ago (76 bytes ahead in playback buffer)
( 190.114| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17596 bytes ago (68 bytes ahead in playback buffer)
( 190.114| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17604 bytes ago (60 bytes ahead in playback buffer)
( 190.114| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17616 bytes ago (48 bytes ahead in playback buffer)
( 190.114| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17628 bytes ago (36 bytes ahead in playback buffer)
( 190.115| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17660 bytes ago (4 bytes ahead in playback buffer)
( 190.115| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 30401 / 46% / -20.02 dB, front-right: 30401 / 46% / -20.02 dB
( 190.115| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 30419 / 46% / -20.00 dB, front-right: 30419 / 46% / -20.00 dB
( 190.115| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65497 / 100% / -0.02 dB, front-right: 65497 / 100% / -0.02 dB (accurate-enough=yes)
( 190.115| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume not changing
( 190.115| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 190.115| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 17364 bytes.
( 190.115| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 190.115| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 4341
( 190.115| 0.000) D: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
( 190.115| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 4341
( 190.115| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 17364 bytes.
( 190.115| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 190.115| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 32366
( 190.115| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 190.121| 0.006) I: [pulseaudio] sink-input.c: Freeing input 11 "AudioStream"
( 195.117| 4.995) I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo idle for too long, suspending ...
( 195.117| 0.000) D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_14.2.analog-stereo is 0x0004, suspending
( 195.120| 0.002) I: [alsa-sink-CX20756 Analog] alsa-sink.c: Device suspended...
( 195.120| 0.000) D: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
( 195.123| 0.003) D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC1 is accessible: yes
( 195.124| 0.000) D: [pulseaudio] module-udev-detect.c: Resuming all sinks and sources of card alsa_card.pci-0000_00_14.2.
( 286.928| 91.804) I: [pulseaudio] client.c: Created 9 "Native client (UNIX socket client)"
( 286.995| 0.066) D: [pulseaudio] protocol-native.c: Protocol version: remote 29, local 29
( 286.995| 0.000) I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
( 286.995| 0.000) D: [pulseaudio] protocol-native.c: SHM possible: yes
( 286.995| 0.000) D: [pulseaudio] protocol-native.c: Negotiated SHM: yes
( 286.997| 0.002) D: [pulseaudio] module-augment-properties.c: Looking for .desktop file for pavucontrol
( 287.143| 0.145) D: [pulseaudio] module-stream-restore.c: Not restoring device for stream source-output-by-application-id:org.PulseAudio.pavucontrol, because already set
( 287.143| 0.000) D: [pulseaudio] module-intended-roles.c: Not setting device for stream Peak detect, because already set.
( 287.143| 0.000) D: [pulseaudio] source-output.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\""
( 287.143| 0.000) I: [pulseaudio] source-output.c: Trying to change sample rate
( 287.143| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for source output source-output-by-application-id:org.PulseAudio.pavucontrol.
( 287.143| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_01.1.hdmi-stereo becomes busy, resuming.
( 287.143| 0.000) D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_01.1.hdmi-stereo is 0x0000, resuming
( 287.144| 0.000) D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio0'
( 287.144| 0.000) I: [alsa-sink-HDMI 0] alsa-sink.c: Trying resume...
( 287.144| 0.000) D: [alsa-sink-HDMI 0] alsa-util.c: Maximum hw buffer size is 371 ms
( 287.145| 0.000) D: [alsa-sink-HDMI 0] alsa-util.c: Set buffer size first (to 4416 samples), period size second (to 736 samples).
( 287.145| 0.000) D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=0
( 287.145| 0.000) D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=1
( 287.145| 0.000) I: [alsa-sink-HDMI 0] alsa-sink.c: Resumed successfully...
( 287.145| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_01.1.hdmi-stereo becomes idle, timeout in 5 seconds.
( 287.145| 0.000) I: [alsa-sink-HDMI 0] alsa-sink.c: Starting playback.
( 287.145| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_01.1.hdmi-stereo becomes idle, timeout in 5 seconds.
( 287.145| 0.000) D: [pulseaudio] resampler.c: Channel matrix:
( 287.145| 0.000) D: [pulseaudio] resampler.c: I00 I01
( 287.145| 0.000) D: [pulseaudio] resampler.c: +------------
( 287.145| 0.000) D: [pulseaudio] resampler.c: O00 | 0.500 0.500
( 287.145| 0.000) I: [pulseaudio] remap.c: Using generic matrix remapping
( 287.145| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 287.145| 0.000) D: [pulseaudio] resampler.c: rate 44100 -> 25 (method peaks)
( 287.145| 0.000) D: [pulseaudio] resampler.c: format s16le -> float32le (intermediate s16le)
( 287.145| 0.000) D: [pulseaudio] resampler.c: channels 2 -> 1 (resampling 1)
( 287.145| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 287.145| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 287.145| 0.000) I: [pulseaudio] source-output.c: Created output 9 "Peak detect" on alsa_output.pci-0000_00_01.1.hdmi-stereo.monitor with sample spec float32le 1ch 25Hz and channel map mono
( 287.145| 0.000) I: [pulseaudio] source-output.c: media.name = "Peak detect"
( 287.145| 0.000) I: [pulseaudio] source-output.c: application.name = "PulseAudio Volume Control"
( 287.145| 0.000) I: [pulseaudio] source-output.c: native-protocol.peer = "UNIX socket client"
( 287.145| 0.000) I: [pulseaudio] source-output.c: native-protocol.version = "29"
( 287.145| 0.000) I: [pulseaudio] source-output.c: application.id = "org.PulseAudio.pavucontrol"
( 287.145| 0.000) I: [pulseaudio] source-output.c: application.icon_name = "audio-card"
( 287.145| 0.000) I: [pulseaudio] source-output.c: application.version = "2.0"
( 287.145| 0.000) I: [pulseaudio] source-output.c: application.process.id = "5368"
( 287.145| 0.000) I: [pulseaudio] source-output.c: application.process.user = "david"
( 287.145| 0.000) I: [pulseaudio] source-output.c: application.process.host = "fuileach"
( 287.145| 0.000) I: [pulseaudio] source-output.c: application.process.binary = "pavucontrol"
( 287.145| 0.000) I: [pulseaudio] source-output.c: application.language = "ga_IE.UTF-8"
( 287.145| 0.000) I: [pulseaudio] source-output.c: window.x11.display = ":0"
( 287.145| 0.000) I: [pulseaudio] source-output.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 287.145| 0.000) I: [pulseaudio] source-output.c: application.process.session_id = "1"
( 287.145| 0.000) I: [pulseaudio] source-output.c: module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
( 287.146| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0
( 287.146| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0
( 287.146| 0.000) I: [pulseaudio] protocol-native.c: Final latency 180.14 ms = 80.00 ms + 100.14 ms
( 287.146| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 287.146| 0.000) D: [pulseaudio] module-stream-restore.c: Not restoring device for stream source-output-by-application-id:org.PulseAudio.pavucontrol, because already set
( 287.146| 0.000) D: [pulseaudio] module-intended-roles.c: Not setting device for stream Peak detect, because already set.
( 287.146| 0.000) D: [pulseaudio] source-output.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\""
( 287.146| 0.000) I: [pulseaudio] source-output.c: Trying to change sample rate
( 287.146| 0.000) D: [pulseaudio] source.c: Suspending source alsa_output.pci-0000_00_14.2.analog-stereo.monitor due to changing the sample rate.
( 287.147| 0.000) D: [pulseaudio] sink.c: Suspending sink alsa_output.pci-0000_00_14.2.analog-stereo due to changing the sample rate.
( 287.147| 0.000) I: [pulseaudio] alsa-sink.c: Updating rate for device front:1, new rate is 44100
( 287.147| 0.000) I: [pulseaudio] sink.c: Changed sampling rate successfully
( 287.147| 0.000) I: [pulseaudio] source.c: Changed sampling rate successfully
( 287.147| 0.000) I: [pulseaudio] source-output.c: Rate changed to 44100 Hz
( 287.147| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for source output source-output-by-application-id:org.PulseAudio.pavucontrol.
( 287.147| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 287.147| 0.000) D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_14.2.analog-stereo is 0x0000, resuming
( 287.147| 0.000) D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio1'
( 287.147| 0.000) I: [alsa-sink-CX20756 Analog] alsa-sink.c: Trying resume...
( 287.148| 0.000) D: [alsa-sink-CX20756 Analog] alsa-util.c: Maximum hw buffer size is 371 ms
( 291.188| 4.040) D: [alsa-sink-CX20756 Analog] alsa-util.c: Set buffer size first (to 4416 samples), period size second (to 736 samples).
( 291.188| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: hwbuf_unused=0
( 291.189| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: setting avail_min=1
( 291.189| 0.000) I: [alsa-sink-CX20756 Analog] alsa-sink.c: Resumed successfully...
( 291.189| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 291.189| 0.000) I: [alsa-sink-CX20756 Analog] alsa-sink.c: Starting playback.
( 291.190| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 291.190| 0.000) D: [pulseaudio] resampler.c: Channel matrix:
( 291.190| 0.000) D: [pulseaudio] resampler.c: I00 I01
( 291.190| 0.000) D: [pulseaudio] resampler.c: +------------
( 291.190| 0.000) D: [pulseaudio] resampler.c: O00 | 0.500 0.500
( 291.190| 0.000) I: [pulseaudio] remap.c: Using generic matrix remapping
( 291.190| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 291.190| 0.000) D: [pulseaudio] resampler.c: rate 44100 -> 25 (method peaks)
( 291.190| 0.000) D: [pulseaudio] resampler.c: format s16le -> float32le (intermediate s16le)
( 291.190| 0.000) D: [pulseaudio] resampler.c: channels 2 -> 1 (resampling 1)
( 291.190| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 291.190| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 291.190| 0.000) I: [pulseaudio] source-output.c: Created output 10 "Peak detect" on alsa_output.pci-0000_00_14.2.analog-stereo.monitor with sample spec float32le 1ch 25Hz and channel map mono
( 291.190| 0.000) I: [pulseaudio] source-output.c: media.name = "Peak detect"
( 291.190| 0.000) I: [pulseaudio] source-output.c: application.name = "PulseAudio Volume Control"
( 291.190| 0.000) I: [pulseaudio] source-output.c: native-protocol.peer = "UNIX socket client"
( 291.190| 0.000) I: [pulseaudio] source-output.c: native-protocol.version = "29"
( 291.190| 0.000) I: [pulseaudio] source-output.c: application.id = "org.PulseAudio.pavucontrol"
( 291.190| 0.000) I: [pulseaudio] source-output.c: application.icon_name = "audio-card"
( 291.190| 0.000) I: [pulseaudio] source-output.c: application.version = "2.0"
( 291.190| 0.000) I: [pulseaudio] source-output.c: application.process.id = "5368"
( 291.190| 0.000) I: [pulseaudio] source-output.c: application.process.user = "david"
( 291.190| 0.000) I: [pulseaudio] source-output.c: application.process.host = "fuileach"
( 291.190| 0.000) I: [pulseaudio] source-output.c: application.process.binary = "pavucontrol"
( 291.190| 0.000) I: [pulseaudio] source-output.c: application.language = "ga_IE.UTF-8"
( 291.190| 0.000) I: [pulseaudio] source-output.c: window.x11.display = ":0"
( 291.190| 0.000) I: [pulseaudio] source-output.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 291.190| 0.000) I: [pulseaudio] source-output.c: application.process.session_id = "1"
( 291.190| 0.000) I: [pulseaudio] source-output.c: module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
( 291.191| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0
( 291.191| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0
( 291.191| 0.000) I: [pulseaudio] protocol-native.c: Final latency 180.14 ms = 80.00 ms + 100.14 ms
( 291.191| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 291.194| 0.002) D: [pulseaudio] module-stream-restore.c: Not restoring device for stream source-output-by-application-id:org.PulseAudio.pavucontrol, because already set
( 291.194| 0.000) D: [pulseaudio] module-intended-roles.c: Not setting device for stream Peak detect, because already set.
( 291.194| 0.000) D: [pulseaudio] source-output.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\""
( 291.194| 0.000) I: [pulseaudio] source-output.c: Trying to change sample rate
( 291.194| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for source output source-output-by-application-id:org.PulseAudio.pavucontrol.
( 291.194| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 291.194| 0.000) D: [pulseaudio] source.c: Suspend cause of source alsa_input.pci-0000_00_14.2.analog-stereo is 0x0000, resuming
( 291.195| 0.000) I: [alsa-source-CX20756 Analog] alsa-source.c: Trying resume...
( 291.195| 0.000) D: [alsa-source-CX20756 Analog] alsa-util.c: Maximum hw buffer size is 371 ms
( 291.195| 0.000) D: [alsa-source-CX20756 Analog] alsa-util.c: Set buffer size first (to 4416 samples), period size second (to 736 samples).
( 291.195| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: hwbuf_unused=0
( 291.195| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: setting avail_min=1
( 291.195| 0.000) I: [alsa-source-CX20756 Analog] alsa-source.c: Resumed successfully...
( 291.195| 0.000) I: [alsa-source-CX20756 Analog] alsa-source.c: Starting capture.
( 291.195| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 291.196| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 291.196| 0.000) D: [pulseaudio] resampler.c: Channel matrix:
( 291.196| 0.000) D: [pulseaudio] resampler.c: I00 I01
( 291.196| 0.000) D: [pulseaudio] resampler.c: +------------
( 291.196| 0.000) D: [pulseaudio] resampler.c: O00 | 0.500 0.500
( 291.196| 0.000) I: [pulseaudio] remap.c: Using generic matrix remapping
( 291.196| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 291.196| 0.000) D: [pulseaudio] resampler.c: rate 44100 -> 25 (method peaks)
( 291.196| 0.000) D: [pulseaudio] resampler.c: format s16le -> float32le (intermediate s16le)
( 291.196| 0.000) D: [pulseaudio] resampler.c: channels 2 -> 1 (resampling 1)
( 291.196| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 291.196| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 291.196| 0.000) I: [pulseaudio] source-output.c: Created output 11 "Peak detect" on alsa_input.pci-0000_00_14.2.analog-stereo with sample spec float32le 1ch 25Hz and channel map mono
( 291.196| 0.000) I: [pulseaudio] source-output.c: media.name = "Peak detect"
( 291.196| 0.000) I: [pulseaudio] source-output.c: application.name = "PulseAudio Volume Control"
( 291.196| 0.000) I: [pulseaudio] source-output.c: native-protocol.peer = "UNIX socket client"
( 291.196| 0.000) I: [pulseaudio] source-output.c: native-protocol.version = "29"
( 291.196| 0.000) I: [pulseaudio] source-output.c: application.id = "org.PulseAudio.pavucontrol"
( 291.196| 0.000) I: [pulseaudio] source-output.c: application.icon_name = "audio-card"
( 291.196| 0.000) I: [pulseaudio] source-output.c: application.version = "2.0"
( 291.196| 0.000) I: [pulseaudio] source-output.c: application.process.id = "5368"
( 291.196| 0.000) I: [pulseaudio] source-output.c: application.process.user = "david"
( 291.196| 0.000) I: [pulseaudio] source-output.c: application.process.host = "fuileach"
( 291.196| 0.000) I: [pulseaudio] source-output.c: application.process.binary = "pavucontrol"
( 291.196| 0.000) I: [pulseaudio] source-output.c: application.language = "ga_IE.UTF-8"
( 291.196| 0.000) I: [pulseaudio] source-output.c: window.x11.display = ":0"
( 291.196| 0.000) I: [pulseaudio] source-output.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 291.196| 0.000) I: [pulseaudio] source-output.c: application.process.session_id = "1"
( 291.196| 0.000) I: [pulseaudio] source-output.c: module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
( 291.196| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0
( 291.196| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0
( 291.196| 0.000) I: [pulseaudio] protocol-native.c: Final latency 180.14 ms = 80.00 ms + 100.14 ms
( 291.197| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: Requested volume: front-left: 44205 / 67% / -10.26 dB, front-right: 44205 / 67% / -10.26 dB
( 291.197| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: Got hardware volume: front-left: 41350 / 63% / -12.00 dB, front-right: 41350 / 63% / -12.00 dB
( 291.197| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: Calculated software volume: front-left: 70061 / 107% / 1.74 dB, front-right: 70061 / 107% / 1.74 dB (accurate-enough=no)
( 291.197| 0.000) D: [alsa-source-CX20756 Analog] source.c: Volume not changing
( 291.197| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 291.334| 0.137) I: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-application-name:AudioStream.
( 291.368| 0.033) D: [pulseaudio] module-intended-roles.c: Not setting device for stream AudioStream, because already set.
( 291.368| 0.000) D: [pulseaudio] sink-input.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "48000" format.channels = "1" format.channel_map = "\"mono\""
( 291.368| 0.000) I: [pulseaudio] sink-input.c: Trying to change sample rate
( 291.368| 0.000) I: [pulseaudio] sink.c: Cannot update rate, monitor source is RUNNING
( 291.369| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring volume for sink input sink-input-by-application-name:AudioStream.
( 291.369| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for sink input sink-input-by-application-name:AudioStream.
( 291.369| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 291.369| 0.000) D: [pulseaudio] resampler.c: Channel matrix:
( 291.369| 0.000) D: [pulseaudio] resampler.c: I00
( 291.369| 0.000) D: [pulseaudio] resampler.c: +------
( 291.369| 0.000) D: [pulseaudio] resampler.c: O00 | 1.000
( 291.369| 0.000) D: [pulseaudio] resampler.c: O01 | 1.000
( 291.369| 0.000) I: [pulseaudio] remap_sse.c: Using SSE2 mono to stereo remapping
( 291.369| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 291.369| 0.000) D: [pulseaudio] resampler.c: rate 48000 -> 44100 (method speex-float-1)
( 291.369| 0.000) D: [pulseaudio] resampler.c: format float32le -> s16le (intermediate float32le)
( 291.369| 0.000) D: [pulseaudio] resampler.c: channels 1 -> 2 (resampling 1)
( 291.369| 0.000) I: [pulseaudio] resampler.c: Choosing speex quality setting 1.
( 291.369| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 291.369| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 291.369| 0.000) I: [pulseaudio] sink-input.c: Created input 12 "AudioStream" on alsa_output.pci-0000_00_14.2.analog-stereo with sample spec float32le 1ch 48000Hz and channel map mono
( 291.369| 0.000) I: [pulseaudio] sink-input.c: media.name = "AudioStream"
( 291.369| 0.000) I: [pulseaudio] sink-input.c: application.name = "AudioStream"
( 291.369| 0.000) I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
( 291.369| 0.000) I: [pulseaudio] sink-input.c: native-protocol.version = "29"
( 291.369| 0.000) I: [pulseaudio] sink-input.c: application.process.id = "4321"
( 291.369| 0.000) I: [pulseaudio] sink-input.c: application.process.user = "david"
( 291.369| 0.000) I: [pulseaudio] sink-input.c: application.process.host = "fuileach"
( 291.369| 0.000) I: [pulseaudio] sink-input.c: application.process.binary = "iceweasel"
( 291.369| 0.000) I: [pulseaudio] sink-input.c: window.x11.display = ":0"
( 291.369| 0.000) I: [pulseaudio] sink-input.c: application.language = "ga_IE.UTF-8"
( 291.369| 0.000) I: [pulseaudio] sink-input.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 291.369| 0.000) I: [pulseaudio] sink-input.c: application.process.session_id = "1"
( 291.369| 0.000) I: [pulseaudio] sink-input.c: application.icon_name = "iceweasel"
( 291.369| 0.000) I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-application-name:AudioStream"
( 291.370| 0.000) I: [pulseaudio] protocol-native.c: Requested tlength=100.00 ms, minreq=25.00 ms
( 291.370| 0.000) D: [pulseaudio] protocol-native.c: Traditional mode enabled, modifying sink usec only for compat with minreq.
( 291.371| 0.001) D: [pulseaudio] protocol-native.c: Requested latency=50.00 ms, Received latency=100.14 ms
( 291.371| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=28828, base=4, prebuf=24032, minreq=4800 maxrewind=0
( 291.371| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=28828, base=4, prebuf=24032, minreq=4800 maxrewind=0
( 291.371| 0.000) I: [pulseaudio] protocol-native.c: Final latency 250.28 ms = 100.14 ms + 2*25.00 ms + 100.14 ms
( 291.372| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 30401 / 46% / -20.02 dB, front-right: 30401 / 46% / -20.02 dB
( 291.372| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 30419 / 46% / -20.00 dB, front-right: 30419 / 46% / -20.00 dB
( 291.372| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65497 / 100% / -0.02 dB, front-right: 65497 / 100% / -0.02 dB (accurate-enough=yes)
( 291.372| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume not changing
( 291.373| 0.001) D: [alsa-sink-CX20756 Analog] protocol-native.c: Requesting rewind due to end of underrun.
( 291.377| 0.003) I: [pulseaudio] sink.c: Cannot update rate, monitor source is RUNNING
( 291.377| 0.000) D: [alsa-sink-CX20756 Analog] protocol-native.c: Requesting rewind due to end of underrun.
( 291.377| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Requesting rewind due to uncorking
( 291.377| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 291.377| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 291.377| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 17376 bytes.
( 291.377| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 4344
( 291.377| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 4344
( 291.377| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 17376 bytes.
( 291.377| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 291.377| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 0
( 291.377| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 291.391| 0.013) D: [pulseaudio] module-intended-roles.c: Not setting device for stream Peak detect, because already set.
( 291.391| 0.000) D: [pulseaudio] source-output.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\""
( 291.391| 0.000) I: [pulseaudio] source-output.c: Trying to change sample rate
( 291.391| 0.000) I: [pulseaudio] source.c: Cannot update rate, SOURCE_IS_RUNNING, will keep using 44100 Hz
( 291.391| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for source output source-output-by-application-id:org.PulseAudio.pavucontrol.
( 291.391| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 291.391| 0.000) D: [pulseaudio] resampler.c: Channel matrix:
( 291.391| 0.000) D: [pulseaudio] resampler.c: I00 I01
( 291.391| 0.000) D: [pulseaudio] resampler.c: +------------
( 291.391| 0.000) D: [pulseaudio] resampler.c: O00 | 0.500 0.500
( 291.391| 0.000) I: [pulseaudio] remap.c: Using generic matrix remapping
( 291.391| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 291.391| 0.000) D: [pulseaudio] resampler.c: rate 44100 -> 25 (method peaks)
( 291.391| 0.000) D: [pulseaudio] resampler.c: format s16le -> float32le (intermediate s16le)
( 291.391| 0.000) D: [pulseaudio] resampler.c: channels 2 -> 1 (resampling 1)
( 291.391| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 291.391| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 291.391| 0.000) I: [pulseaudio] source-output.c: Created output 12 "Peak detect" on alsa_output.pci-0000_00_14.2.analog-stereo.monitor with sample spec float32le 1ch 25Hz and channel map mono
( 291.391| 0.000) I: [pulseaudio] source-output.c: media.name = "Peak detect"
( 291.391| 0.000) I: [pulseaudio] source-output.c: application.name = "PulseAudio Volume Control"
( 291.391| 0.000) I: [pulseaudio] source-output.c: native-protocol.peer = "UNIX socket client"
( 291.391| 0.000) I: [pulseaudio] source-output.c: native-protocol.version = "29"
( 291.391| 0.000) I: [pulseaudio] source-output.c: application.id = "org.PulseAudio.pavucontrol"
( 291.391| 0.000) I: [pulseaudio] source-output.c: application.icon_name = "audio-card"
( 291.391| 0.000) I: [pulseaudio] source-output.c: application.version = "2.0"
( 291.391| 0.000) I: [pulseaudio] source-output.c: application.process.id = "5368"
( 291.391| 0.000) I: [pulseaudio] source-output.c: application.process.user = "david"
( 291.391| 0.000) I: [pulseaudio] source-output.c: application.process.host = "fuileach"
( 291.391| 0.000) I: [pulseaudio] source-output.c: application.process.binary = "pavucontrol"
( 291.391| 0.000) I: [pulseaudio] source-output.c: application.language = "ga_IE.UTF-8"
( 291.391| 0.000) I: [pulseaudio] source-output.c: window.x11.display = ":0"
( 291.391| 0.000) I: [pulseaudio] source-output.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 291.391| 0.000) I: [pulseaudio] source-output.c: application.process.session_id = "1"
( 291.391| 0.000) I: [pulseaudio] source-output.c: module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
( 291.392| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0
( 291.392| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0
( 291.392| 0.000) I: [pulseaudio] protocol-native.c: Final latency 180.14 ms = 80.00 ms + 100.14 ms
( 297.523| 6.130) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_01.1.hdmi-stereo becomes idle, timeout in 5 seconds.
( 297.523| 0.000) I: [pulseaudio] source-output.c: Freeing output 9 "Peak detect"
( 297.524| 0.001) I: [pulseaudio] source-output.c: Freeing output 10 "Peak detect"
( 297.524| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: Requested volume: front-left: 44205 / 67% / -10.26 dB, front-right: 44205 / 67% / -10.26 dB
( 297.524| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: Got hardware volume: front-left: 41350 / 63% / -12.00 dB, front-right: 41350 / 63% / -12.00 dB
( 297.524| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: Calculated software volume: front-left: 70061 / 107% / 1.74 dB, front-right: 70061 / 107% / 1.74 dB (accurate-enough=no)
( 297.524| 0.000) D: [alsa-source-CX20756 Analog] source.c: Volume not changing
( 297.524| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 297.524| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 297.524| 0.000) I: [pulseaudio] source-output.c: Freeing output 11 "Peak detect"
( 297.525| 0.000) I: [pulseaudio] source-output.c: Freeing output 12 "Peak detect"
( 297.525| 0.000) I: [pulseaudio] client.c: Freed 9 "PulseAudio Volume Control"
( 297.525| 0.000) I: [pulseaudio] protocol-native.c: Connection died.
( 297.714| 0.188) D: [alsa-sink-CX20756 Analog] protocol-native.c: Implicit underrun of 'AudioStream'
( 297.714| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 1044 bytes ago (16620 bytes ahead in playback buffer)
( 297.714| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 1072 bytes ago (16592 bytes ahead in playback buffer)
( 297.714| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 1088 bytes ago (16576 bytes ahead in playback buffer)
( 297.714| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Requesting rewind due to corking
( 297.714| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 0 bytes.
( 297.714| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Mhmm, actually there is nothing to rewind.
( 297.715| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 1104 bytes ago (16560 bytes ahead in playback buffer)
( 297.715| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 1112 bytes ago (16552 bytes ahead in playback buffer)
( 297.715| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 297.715| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 1148 bytes ago (16516 bytes ahead in playback buffer)
( 297.715| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 1160 bytes ago (16504 bytes ahead in playback buffer)
( 297.715| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 1180 bytes ago (16484 bytes ahead in playback buffer)
( 297.715| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 1188 bytes ago (16476 bytes ahead in playback buffer)
( 297.715| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 1200 bytes ago (16464 bytes ahead in playback buffer)
( 297.715| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 1208 bytes ago (16456 bytes ahead in playback buffer)
( 297.715| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 1220 bytes ago (16444 bytes ahead in playback buffer)
( 297.715| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 1228 bytes ago (16436 bytes ahead in playback buffer)
( 297.715| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 1236 bytes ago (16428 bytes ahead in playback buffer)
( 297.715| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 1248 bytes ago (16416 bytes ahead in playback buffer)
( 297.715| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 30401 / 46% / -20.02 dB, front-right: 30401 / 46% / -20.02 dB
( 297.715| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 30419 / 46% / -20.00 dB, front-right: 30419 / 46% / -20.00 dB
( 297.715| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65497 / 100% / -0.02 dB, front-right: 65497 / 100% / -0.02 dB (accurate-enough=yes)
( 297.715| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume not changing
( 297.716| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 297.716| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 297.716| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 17372 bytes.
( 297.716| 0.000) D: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
( 297.716| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 4343
( 297.716| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 4343
( 297.716| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 17372 bytes.
( 297.716| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 297.716| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 77771
( 297.716| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 297.721| 0.005) I: [pulseaudio] sink-input.c: Freeing input 12 "AudioStream"
( 297.721| 0.000) D: [pulseaudio] ratelimit.c: 112 events suppressed
( 297.721| 0.000) D: [pulseaudio] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 302.528| 4.806) I: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_14.2.analog-stereo idle for too long, suspending ...
( 302.528| 0.000) D: [pulseaudio] source.c: Suspend cause of source alsa_input.pci-0000_00_14.2.analog-stereo is 0x0004, suspending
( 302.528| 0.000) I: [alsa-source-CX20756 Analog] alsa-source.c: Device suspended...
( 302.528| 0.000) D: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
( 302.539| 0.011) I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_01.1.hdmi-stereo idle for too long, suspending ...
( 302.540| 0.000) D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_01.1.hdmi-stereo is 0x0004, suspending
( 302.542| 0.002) I: [alsa-sink-HDMI 0] alsa-sink.c: Device suspended...
( 302.542| 0.000) D: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
( 302.549| 0.006) D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
( 302.549| 0.000) D: [pulseaudio] module-udev-detect.c: Resuming all sinks and sources of card alsa_card.pci-0000_00_01.1.
( 302.549| 0.000) D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC1 is accessible: yes
( 302.549| 0.000) D: [pulseaudio] module-udev-detect.c: Resuming all sinks and sources of card alsa_card.pci-0000_00_14.2.
( 302.716| 0.166) I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo idle for too long, suspending ...
( 302.716| 0.000) D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_14.2.analog-stereo is 0x0004, suspending
( 302.718| 0.001) I: [alsa-sink-CX20756 Analog] alsa-sink.c: Device suspended...
( 302.718| 0.000) D: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
( 302.725| 0.006) D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC1 is accessible: yes
( 302.725| 0.000) D: [pulseaudio] module-udev-detect.c: Resuming all sinks and sources of card alsa_card.pci-0000_00_14.2.
( 316.155| 13.430) I: [pulseaudio] client.c: Created 10 "Native client (UNIX socket client)"
( 316.155| 0.000) D: [pulseaudio] protocol-native.c: Protocol version: remote 29, local 29
( 316.155| 0.000) I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
( 316.155| 0.000) D: [pulseaudio] protocol-native.c: SHM possible: yes
( 316.155| 0.000) D: [pulseaudio] protocol-native.c: Negotiated SHM: yes
( 316.156| 0.000) D: [pulseaudio] module-augment-properties.c: Looking for .desktop file for clementine
( 316.214| 0.058) I: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-application-name:Clementine.
( 316.214| 0.000) D: [pulseaudio] module-intended-roles.c: Not setting device for stream pulsesink probe, because already set.
( 316.214| 0.000) D: [pulseaudio] sink-input.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.channels = "2" format.rate = "44100" format.channel_map = "\"front-left,front-right\""
( 316.214| 0.000) I: [pulseaudio] sink-input.c: Trying to change sample rate
( 316.215| 0.000) I: [pulseaudio] sink-input.c: Rate changed to 44100 Hz
( 316.215| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring volume for sink input sink-input-by-application-name:Clementine.
( 316.215| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for sink input sink-input-by-application-name:Clementine.
( 316.215| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 316.215| 0.000) D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_14.2.analog-stereo is 0x0000, resuming
( 316.215| 0.000) D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio1'
( 316.216| 0.000) I: [alsa-sink-CX20756 Analog] alsa-sink.c: Trying resume...
( 316.216| 0.000) D: [alsa-sink-CX20756 Analog] alsa-util.c: Maximum hw buffer size is 371 ms
( 316.217| 0.000) D: [alsa-sink-CX20756 Analog] alsa-util.c: Set buffer size first (to 4416 samples), period size second (to 736 samples).
( 316.218| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: hwbuf_unused=0
( 316.218| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: setting avail_min=1
( 316.218| 0.000) I: [alsa-sink-CX20756 Analog] alsa-sink.c: Resumed successfully...
( 316.218| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 316.218| 0.000) I: [alsa-sink-CX20756 Analog] alsa-sink.c: Starting playback.
( 316.218| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 316.218| 0.000) I: [pulseaudio] resampler.c: Forcing resampler 'copy', because of fixed, identical sample rates.
( 316.218| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 316.218| 0.000) D: [pulseaudio] resampler.c: rate 44100 -> 44100 (method copy)
( 316.218| 0.000) D: [pulseaudio] resampler.c: format float32le -> s16le (intermediate s16le)
( 316.218| 0.000) D: [pulseaudio] resampler.c: channels 2 -> 2 (resampling 2)
( 316.218| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 316.218| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 316.218| 0.000) I: [pulseaudio] sink-input.c: Created input 13 "pulsesink probe" on alsa_output.pci-0000_00_14.2.analog-stereo with sample spec float32le 2ch 44100Hz and channel map front-left,front-right
( 316.218| 0.000) I: [pulseaudio] sink-input.c: media.name = "pulsesink probe"
( 316.218| 0.000) I: [pulseaudio] sink-input.c: application.name = "Clementine"
( 316.218| 0.000) I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
( 316.218| 0.000) I: [pulseaudio] sink-input.c: native-protocol.version = "29"
( 316.218| 0.000) I: [pulseaudio] sink-input.c: application.process.id = "5537"
( 316.218| 0.000) I: [pulseaudio] sink-input.c: application.process.user = "david"
( 316.218| 0.000) I: [pulseaudio] sink-input.c: application.process.host = "fuileach"
( 316.218| 0.000) I: [pulseaudio] sink-input.c: application.process.binary = "clementine"
( 316.218| 0.000) I: [pulseaudio] sink-input.c: application.language = "ga_IE.UTF-8"
( 316.218| 0.000) I: [pulseaudio] sink-input.c: window.x11.display = ":0"
( 316.218| 0.000) I: [pulseaudio] sink-input.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 316.218| 0.000) I: [pulseaudio] sink-input.c: application.process.session_id = "1"
( 316.218| 0.000) I: [pulseaudio] sink-input.c: application.icon_name = "application-x-clementine"
( 316.218| 0.000) I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-application-name:Clementine"
( 316.219| 0.000) I: [pulseaudio] protocol-native.c: Requested tlength=136.05 ms, minreq=20.00 ms
( 316.219| 0.000) D: [pulseaudio] protocol-native.c: Adjust latency mode enabled, configuring sink latency to half of overall latency.
( 316.219| 0.000) D: [pulseaudio] protocol-native.c: Requested latency=48.03 ms, Received latency=100.14 ms
( 316.219| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=49440, base=8, prebuf=42392, minreq=7056 maxrewind=0
( 316.219| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=49440, base=8, prebuf=42392, minreq=7056 maxrewind=0
( 316.219| 0.000) I: [pulseaudio] protocol-native.c: Final latency 240.27 ms = 100.14 ms + 2*20.00 ms + 100.14 ms
( 316.220| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 15424 / 24% / -37.70 dB, front-right: 15424 / 24% / -37.70 dB
( 316.220| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 15481 / 24% / -37.60 dB, front-right: 15481 / 24% / -37.60 dB
( 316.220| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65295 / 100% / -0.10 dB, front-right: 65295 / 100% / -0.10 dB (accurate-enough=yes)
( 316.220| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 15424 at 4093747537
( 316.220| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 91808 usec
( 316.220| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 91655 usec
( 316.220| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 91428 usec
( 316.220| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 91362 usec
( 316.220| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 91327 usec
( 316.220| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 91280 usec
( 316.220| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 30401 / 46% / -20.02 dB, front-right: 30401 / 46% / -20.02 dB
( 316.220| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 30419 / 46% / -20.00 dB, front-right: 30419 / 46% / -20.00 dB
( 316.220| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65497 / 100% / -0.02 dB, front-right: 65497 / 100% / -0.02 dB (accurate-enough=yes)
( 316.220| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 30401 at 4093764375
( 316.221| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 91103 usec
( 316.221| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 316.221| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 17368 bytes.
( 316.221| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 4342
( 316.221| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 4342
( 316.221| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 17368 bytes.
( 316.221| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 316.221| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 1328
( 316.221| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 15424 at 4093649936 was written 6673 usec late
( 316.221| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 316.222| 0.001) D: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
( 316.227| 0.004) I: [pulseaudio] sink-input.c: Freeing input 13 "pulsesink probe"
( 316.227| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-application-name:Clementine.
( 316.227| 0.000) D: [pulseaudio] module-intended-roles.c: Not setting device for stream pulsesink probe, because already set.
( 316.227| 0.000) D: [pulseaudio] sink-input.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.channels = "2" format.rate = "44100" format.channel_map = "\"front-left,front-right\""
( 316.227| 0.000) I: [pulseaudio] sink-input.c: Trying to change sample rate
( 316.227| 0.000) I: [pulseaudio] sink-input.c: Rate changed to 44100 Hz
( 316.227| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring volume for sink input sink-input-by-application-name:Clementine.
( 316.227| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for sink input sink-input-by-application-name:Clementine.
( 316.227| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 316.227| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 316.227| 0.000) I: [pulseaudio] resampler.c: Forcing resampler 'copy', because of fixed, identical sample rates.
( 316.227| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 316.227| 0.000) D: [pulseaudio] resampler.c: rate 44100 -> 44100 (method copy)
( 316.227| 0.000) D: [pulseaudio] resampler.c: format float32le -> s16le (intermediate s16le)
( 316.227| 0.000) D: [pulseaudio] resampler.c: channels 2 -> 2 (resampling 2)
( 316.227| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 316.227| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 316.227| 0.000) I: [pulseaudio] sink-input.c: Created input 14 "pulsesink probe" on alsa_output.pci-0000_00_14.2.analog-stereo with sample spec float32le 2ch 44100Hz and channel map front-left,front-right
( 316.227| 0.000) I: [pulseaudio] sink-input.c: media.name = "pulsesink probe"
( 316.227| 0.000) I: [pulseaudio] sink-input.c: application.name = "Clementine"
( 316.227| 0.000) I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
( 316.227| 0.000) I: [pulseaudio] sink-input.c: native-protocol.version = "29"
( 316.227| 0.000) I: [pulseaudio] sink-input.c: application.process.id = "5537"
( 316.227| 0.000) I: [pulseaudio] sink-input.c: application.process.user = "david"
( 316.227| 0.000) I: [pulseaudio] sink-input.c: application.process.host = "fuileach"
( 316.227| 0.000) I: [pulseaudio] sink-input.c: application.process.binary = "clementine"
( 316.227| 0.000) I: [pulseaudio] sink-input.c: application.language = "ga_IE.UTF-8"
( 316.227| 0.000) I: [pulseaudio] sink-input.c: window.x11.display = ":0"
( 316.227| 0.000) I: [pulseaudio] sink-input.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 316.227| 0.000) I: [pulseaudio] sink-input.c: application.process.session_id = "1"
( 316.227| 0.000) I: [pulseaudio] sink-input.c: application.icon_name = "application-x-clementine"
( 316.227| 0.000) I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-application-name:Clementine"
( 316.228| 0.000) I: [pulseaudio] protocol-native.c: Requested tlength=136.05 ms, minreq=20.00 ms
( 316.228| 0.000) D: [pulseaudio] protocol-native.c: Adjust latency mode enabled, configuring sink latency to half of overall latency.
( 318.236| 2.008) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Written HW volume did not match with the request: front-left: 15424 / 24% / -37.70 dB, front-right: 15424 / 24% / -37.70 dB (request) != front-left: 15246 / 23% / -38.00 dB, front-right: 15246 / 23% / -38.00 dB
( 318.237| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 9327 usec
( 318.237| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 318.237| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 30401 at 4093665936 was written 2006692 usec late
( 320.244| 2.007) D: [pulseaudio] protocol-native.c: Requested latency=48.03 ms, Received latency=100.14 ms
( 320.244| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=49440, base=8, prebuf=42392, minreq=7056 maxrewind=0
( 320.244| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=49440, base=8, prebuf=42392, minreq=7056 maxrewind=0
( 320.244| 0.000) I: [pulseaudio] protocol-native.c: Final latency 240.27 ms = 100.14 ms + 2*20.00 ms + 100.14 ms
( 320.245| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 15424 / 24% / -37.70 dB, front-right: 15424 / 24% / -37.70 dB
( 320.245| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 15481 / 24% / -37.60 dB, front-right: 15481 / 24% / -37.60 dB
( 320.245| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65295 / 100% / -0.10 dB, front-right: 65295 / 100% / -0.10 dB (accurate-enough=yes)
( 320.245| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 15424 at 4097672563
( 320.245| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 15424 at 4097672563 was written 8024 usec late
( 322.252| 2.007) I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo idle for too long, suspending ...
( 322.252| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Written HW volume did not match with the request: front-left: 15424 / 24% / -37.70 dB, front-right: 15424 / 24% / -37.70 dB (request) != front-left: 15246 / 23% / -38.00 dB, front-right: 15246 / 23% / -38.00 dB
( 322.252| 0.000) D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_14.2.analog-stereo is 0x0004, suspending
( 322.254| 0.001) I: [alsa-sink-CX20756 Analog] alsa-sink.c: Device suspended...
( 322.255| 0.000) I: [pulseaudio] core.c: All sinks and sources are suspended, vacuuming memory
( 322.262| 0.007) I: [pulseaudio] client.c: Created 11 "Native client (UNIX socket client)"
( 322.263| 0.000) D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC1 is accessible: yes
( 322.263| 0.000) D: [pulseaudio] module-udev-detect.c: Resuming all sinks and sources of card alsa_card.pci-0000_00_14.2.
( 322.263| 0.000) D: [pulseaudio] protocol-native.c: Protocol version: remote 29, local 29
( 322.263| 0.000) I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
( 322.263| 0.000) D: [pulseaudio] protocol-native.c: SHM possible: yes
( 322.263| 0.000) D: [pulseaudio] protocol-native.c: Negotiated SHM: yes
( 322.263| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 30401 / 46% / -20.02 dB, front-right: 30401 / 46% / -20.02 dB
( 322.263| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 30419 / 46% / -20.00 dB, front-right: 30419 / 46% / -20.00 dB
( 322.263| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65497 / 100% / -0.02 dB, front-right: 65497 / 100% / -0.02 dB (accurate-enough=yes)
( 322.263| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 30401 at 4099707309
( 322.263| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 7953 usec
( 322.263| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 7914 usec
( 322.264| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 322.264| 0.000) D: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
( 322.268| 0.004) I: [pulseaudio] sink-input.c: Freeing input 14 "pulsesink probe"
( 322.269| 0.000) D: [pulseaudio] module-augment-properties.c: Looking for .desktop file for pavucontrol
( 322.269| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-application-name:Clementine.
( 322.269| 0.000) D: [pulseaudio] module-intended-roles.c: Not setting device for stream Playback Stream, because already set.
( 322.269| 0.000) D: [pulseaudio] sink-input.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.channels = "2" format.rate = "44100" format.channel_map = "\"front-left,front-right\""
( 322.269| 0.000) I: [pulseaudio] sink-input.c: Trying to change sample rate
( 322.269| 0.000) I: [pulseaudio] sink-input.c: Rate changed to 44100 Hz
( 322.269| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring volume for sink input sink-input-by-application-name:Clementine.
( 322.269| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for sink input sink-input-by-application-name:Clementine.
( 322.269| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 322.269| 0.000) D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_14.2.analog-stereo is 0x0000, resuming
( 322.270| 0.000) D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio1'
( 322.270| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 1189 usec
( 322.270| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 1145 usec
( 322.270| 0.000) I: [alsa-sink-CX20756 Analog] alsa-sink.c: Trying resume...
( 322.271| 0.000) D: [alsa-sink-CX20756 Analog] alsa-util.c: Maximum hw buffer size is 371 ms
( 322.271| 0.000) D: [alsa-sink-CX20756 Analog] alsa-util.c: Set buffer size first (to 4416 samples), period size second (to 736 samples).
( 322.271| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: hwbuf_unused=0
( 322.271| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: setting avail_min=1
( 322.272| 0.000) I: [alsa-sink-CX20756 Analog] alsa-sink.c: Resumed successfully...
( 322.272| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 30401 at 4099707309 was written 199 usec late
( 322.272| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 324.280| 2.008) I: [alsa-sink-CX20756 Analog] alsa-sink.c: Starting playback.
( 324.281| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 324.281| 0.000) I: [pulseaudio] resampler.c: Forcing resampler 'copy', because of fixed, identical sample rates.
( 324.281| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 324.281| 0.000) D: [pulseaudio] resampler.c: rate 44100 -> 44100 (method copy)
( 324.281| 0.000) D: [pulseaudio] resampler.c: format float32le -> s16le (intermediate s16le)
( 324.281| 0.000) D: [pulseaudio] resampler.c: channels 2 -> 2 (resampling 2)
( 324.281| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 324.281| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 324.281| 0.000) I: [pulseaudio] sink-input.c: Created input 15 "Playback Stream" on alsa_output.pci-0000_00_14.2.analog-stereo with sample spec float32le 2ch 44100Hz and channel map front-left,front-right
( 324.281| 0.000) I: [pulseaudio] sink-input.c: media.name = "Playback Stream"
( 324.281| 0.000) I: [pulseaudio] sink-input.c: application.name = "Clementine"
( 324.281| 0.000) I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
( 324.281| 0.000) I: [pulseaudio] sink-input.c: native-protocol.version = "29"
( 324.281| 0.000) I: [pulseaudio] sink-input.c: application.process.id = "5537"
( 324.281| 0.000) I: [pulseaudio] sink-input.c: application.process.user = "david"
( 324.281| 0.000) I: [pulseaudio] sink-input.c: application.process.host = "fuileach"
( 324.281| 0.000) I: [pulseaudio] sink-input.c: application.process.binary = "clementine"
( 324.281| 0.000) I: [pulseaudio] sink-input.c: application.language = "ga_IE.UTF-8"
( 324.281| 0.000) I: [pulseaudio] sink-input.c: window.x11.display = ":0"
( 324.281| 0.000) I: [pulseaudio] sink-input.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 324.281| 0.000) I: [pulseaudio] sink-input.c: application.process.session_id = "1"
( 324.281| 0.000) I: [pulseaudio] sink-input.c: application.icon_name = "application-x-clementine"
( 324.281| 0.000) I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-application-name:Clementine"
( 324.282| 0.000) I: [pulseaudio] protocol-native.c: Requested tlength=200.00 ms, minreq=10.00 ms
( 324.282| 0.000) D: [pulseaudio] protocol-native.c: Adjust latency mode enabled, configuring sink latency to half of overall latency.
( 324.282| 0.000) D: [pulseaudio] protocol-native.c: Requested latency=90.00 ms, Received latency=100.14 ms
( 324.282| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=42384, base=8, prebuf=0, minreq=3528 maxrewind=0
( 324.282| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=42384, base=8, prebuf=0, minreq=3528 maxrewind=0
( 324.282| 0.000) I: [pulseaudio] protocol-native.c: Final latency 220.27 ms = 100.14 ms + 2*10.00 ms + 100.14 ms
( 324.282| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 15424 / 24% / -37.70 dB, front-right: 15424 / 24% / -37.70 dB
( 324.282| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 15481 / 24% / -37.60 dB, front-right: 15481 / 24% / -37.60 dB
( 324.283| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65295 / 100% / -0.10 dB, front-right: 65295 / 100% / -0.10 dB (accurate-enough=yes)
( 324.283| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 15424 at 4101810385
( 324.283| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 91845 usec
( 324.283| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 91707 usec
( 324.283| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 91333 usec
( 324.283| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 91186 usec
( 324.283| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 91126 usec
( 324.284| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 90958 usec
( 324.284| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 90901 usec
( 324.290| 0.006) D: [alsa-sink-CX20756 Analog] protocol-native.c: Requesting rewind due to end of underrun.
( 324.290| 0.000) D: [alsa-sink-CX20756 Analog] protocol-native.c: Requesting rewind due to end of underrun.
( 324.290| 0.000) D: [alsa-sink-CX20756 Analog] protocol-native.c: Requesting rewind due to end of underrun.
( 324.290| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Requesting rewind due to uncorking
( 324.290| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 324.290| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 17384 bytes.
( 324.290| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 324.290| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 4346
( 324.291| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 4346
( 324.291| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 17384 bytes.
( 324.291| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 324.291| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 1304
( 324.291| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 15424 at 4101719859 was written 6697 usec late
( 326.304| 2.013) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Written HW volume did not match with the request: front-left: 15424 / 24% / -37.70 dB, front-right: 15424 / 24% / -37.70 dB (request) != front-left: 15246 / 23% / -38.00 dB, front-right: 15246 / 23% / -38.00 dB
( 326.305| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 326.312| 0.007) D: [pulseaudio] module-stream-restore.c: Not restoring device for stream source-output-by-application-id:org.PulseAudio.pavucontrol, because already set
( 326.312| 0.000) D: [pulseaudio] module-intended-roles.c: Not setting device for stream Peak detect, because already set.
( 326.312| 0.000) D: [pulseaudio] source-output.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\""
( 326.312| 0.000) I: [pulseaudio] source-output.c: Trying to change sample rate
( 326.312| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for source output source-output-by-application-id:org.PulseAudio.pavucontrol.
( 326.312| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_01.1.hdmi-stereo becomes busy, resuming.
( 326.312| 0.000) D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_01.1.hdmi-stereo is 0x0000, resuming
( 326.313| 0.000) D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio0'
( 326.313| 0.000) I: [alsa-sink-HDMI 0] alsa-sink.c: Trying resume...
( 326.315| 0.001) D: [alsa-sink-HDMI 0] alsa-util.c: Maximum hw buffer size is 371 ms
( 326.315| 0.000) D: [alsa-sink-HDMI 0] alsa-util.c: Set buffer size first (to 4416 samples), period size second (to 736 samples).
( 326.315| 0.000) D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=0
( 326.315| 0.000) D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=1
( 326.315| 0.000) I: [alsa-sink-HDMI 0] alsa-sink.c: Resumed successfully...
( 326.315| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_01.1.hdmi-stereo becomes idle, timeout in 5 seconds.
( 326.315| 0.000) I: [alsa-sink-HDMI 0] alsa-sink.c: Starting playback.
( 326.316| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_01.1.hdmi-stereo becomes idle, timeout in 5 seconds.
( 326.316| 0.000) D: [pulseaudio] resampler.c: Channel matrix:
( 326.316| 0.000) D: [pulseaudio] resampler.c: I00 I01
( 326.316| 0.000) D: [pulseaudio] resampler.c: +------------
( 326.316| 0.000) D: [pulseaudio] resampler.c: O00 | 0.500 0.500
( 326.316| 0.000) I: [pulseaudio] remap.c: Using generic matrix remapping
( 326.316| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 326.316| 0.000) D: [pulseaudio] resampler.c: rate 44100 -> 25 (method peaks)
( 326.316| 0.000) D: [pulseaudio] resampler.c: format s16le -> float32le (intermediate s16le)
( 326.316| 0.000) D: [pulseaudio] resampler.c: channels 2 -> 1 (resampling 1)
( 326.316| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 326.316| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 326.316| 0.000) I: [pulseaudio] source-output.c: Created output 13 "Peak detect" on alsa_output.pci-0000_00_01.1.hdmi-stereo.monitor with sample spec float32le 1ch 25Hz and channel map mono
( 326.316| 0.000) I: [pulseaudio] source-output.c: media.name = "Peak detect"
( 326.316| 0.000) I: [pulseaudio] source-output.c: application.name = "PulseAudio Volume Control"
( 326.316| 0.000) I: [pulseaudio] source-output.c: native-protocol.peer = "UNIX socket client"
( 326.316| 0.000) I: [pulseaudio] source-output.c: native-protocol.version = "29"
( 326.316| 0.000) I: [pulseaudio] source-output.c: application.id = "org.PulseAudio.pavucontrol"
( 326.316| 0.000) I: [pulseaudio] source-output.c: application.icon_name = "audio-card"
( 326.316| 0.000) I: [pulseaudio] source-output.c: application.version = "2.0"
( 326.316| 0.000) I: [pulseaudio] source-output.c: application.process.id = "5701"
( 326.316| 0.000) I: [pulseaudio] source-output.c: application.process.user = "david"
( 326.316| 0.000) I: [pulseaudio] source-output.c: application.process.host = "fuileach"
( 326.316| 0.000) I: [pulseaudio] source-output.c: application.process.binary = "pavucontrol"
( 326.316| 0.000) I: [pulseaudio] source-output.c: application.language = "ga_IE.UTF-8"
( 326.316| 0.000) I: [pulseaudio] source-output.c: window.x11.display = ":0"
( 326.316| 0.000) I: [pulseaudio] source-output.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 326.316| 0.000) I: [pulseaudio] source-output.c: application.process.session_id = "1"
( 326.316| 0.000) I: [pulseaudio] source-output.c: module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
( 326.317| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0
( 326.317| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0
( 326.317| 0.000) I: [pulseaudio] protocol-native.c: Final latency 180.14 ms = 80.00 ms + 100.14 ms
( 326.317| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 326.318| 0.000) D: [pulseaudio] module-stream-restore.c: Not restoring device for stream source-output-by-application-id:org.PulseAudio.pavucontrol, because already set
( 326.318| 0.000) D: [pulseaudio] module-intended-roles.c: Not setting device for stream Peak detect, because already set.
( 326.318| 0.000) D: [pulseaudio] source-output.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\""
( 326.318| 0.000) I: [pulseaudio] source-output.c: Trying to change sample rate
( 326.318| 0.000) I: [pulseaudio] source.c: Cannot update rate, this is a monitor source and the sink is running.
( 326.318| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for source output source-output-by-application-id:org.PulseAudio.pavucontrol.
( 326.318| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 326.318| 0.000) D: [pulseaudio] resampler.c: Channel matrix:
( 326.318| 0.000) D: [pulseaudio] resampler.c: I00 I01
( 326.318| 0.000) D: [pulseaudio] resampler.c: +------------
( 326.318| 0.000) D: [pulseaudio] resampler.c: O00 | 0.500 0.500
( 326.318| 0.000) I: [pulseaudio] remap.c: Using generic matrix remapping
( 326.318| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 326.318| 0.000) D: [pulseaudio] resampler.c: rate 44100 -> 25 (method peaks)
( 326.318| 0.000) D: [pulseaudio] resampler.c: format s16le -> float32le (intermediate s16le)
( 326.318| 0.000) D: [pulseaudio] resampler.c: channels 2 -> 1 (resampling 1)
( 326.318| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 326.318| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 326.318| 0.000) I: [pulseaudio] source-output.c: Created output 14 "Peak detect" on alsa_output.pci-0000_00_14.2.analog-stereo.monitor with sample spec float32le 1ch 25Hz and channel map mono
( 326.318| 0.000) I: [pulseaudio] source-output.c: media.name = "Peak detect"
( 326.318| 0.000) I: [pulseaudio] source-output.c: application.name = "PulseAudio Volume Control"
( 326.318| 0.000) I: [pulseaudio] source-output.c: native-protocol.peer = "UNIX socket client"
( 326.318| 0.000) I: [pulseaudio] source-output.c: native-protocol.version = "29"
( 326.318| 0.000) I: [pulseaudio] source-output.c: application.id = "org.PulseAudio.pavucontrol"
( 326.318| 0.000) I: [pulseaudio] source-output.c: application.icon_name = "audio-card"
( 326.318| 0.000) I: [pulseaudio] source-output.c: application.version = "2.0"
( 326.318| 0.000) I: [pulseaudio] source-output.c: application.process.id = "5701"
( 326.318| 0.000) I: [pulseaudio] source-output.c: application.process.user = "david"
( 326.318| 0.000) I: [pulseaudio] source-output.c: application.process.host = "fuileach"
( 326.318| 0.000) I: [pulseaudio] source-output.c: application.process.binary = "pavucontrol"
( 326.318| 0.000) I: [pulseaudio] source-output.c: application.language = "ga_IE.UTF-8"
( 326.318| 0.000) I: [pulseaudio] source-output.c: window.x11.display = ":0"
( 326.318| 0.000) I: [pulseaudio] source-output.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 326.318| 0.000) I: [pulseaudio] source-output.c: application.process.session_id = "1"
( 326.318| 0.000) I: [pulseaudio] source-output.c: module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
( 326.319| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0
( 326.319| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0
( 326.319| 0.000) I: [pulseaudio] protocol-native.c: Final latency 180.14 ms = 80.00 ms + 100.14 ms
( 326.321| 0.001) D: [pulseaudio] module-stream-restore.c: Not restoring device for stream source-output-by-application-id:org.PulseAudio.pavucontrol, because already set
( 326.321| 0.000) D: [pulseaudio] module-intended-roles.c: Not setting device for stream Peak detect, because already set.
( 326.321| 0.000) D: [pulseaudio] source-output.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\""
( 326.321| 0.000) I: [pulseaudio] source-output.c: Trying to change sample rate
( 326.321| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for source output source-output-by-application-id:org.PulseAudio.pavucontrol.
( 326.321| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 326.321| 0.000) D: [pulseaudio] source.c: Suspend cause of source alsa_input.pci-0000_00_14.2.analog-stereo is 0x0000, resuming
( 326.321| 0.000) I: [alsa-source-CX20756 Analog] alsa-source.c: Trying resume...
( 326.322| 0.000) D: [alsa-source-CX20756 Analog] alsa-util.c: Maximum hw buffer size is 371 ms
( 326.322| 0.000) D: [alsa-source-CX20756 Analog] alsa-util.c: Set buffer size first (to 4416 samples), period size second (to 736 samples).
( 326.322| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: hwbuf_unused=0
( 326.322| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: setting avail_min=1
( 326.322| 0.000) I: [alsa-source-CX20756 Analog] alsa-source.c: Resumed successfully...
( 326.322| 0.000) I: [alsa-source-CX20756 Analog] alsa-source.c: Starting capture.
( 326.322| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 326.322| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 326.322| 0.000) D: [pulseaudio] resampler.c: Channel matrix:
( 326.322| 0.000) D: [pulseaudio] resampler.c: I00 I01
( 326.322| 0.000) D: [pulseaudio] resampler.c: +------------
( 326.322| 0.000) D: [pulseaudio] resampler.c: O00 | 0.500 0.500
( 326.322| 0.000) I: [pulseaudio] remap.c: Using generic matrix remapping
( 326.322| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 326.322| 0.000) D: [pulseaudio] resampler.c: rate 44100 -> 25 (method peaks)
( 326.322| 0.000) D: [pulseaudio] resampler.c: format s16le -> float32le (intermediate s16le)
( 326.322| 0.000) D: [pulseaudio] resampler.c: channels 2 -> 1 (resampling 1)
( 326.322| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 326.322| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 326.322| 0.000) I: [pulseaudio] source-output.c: Created output 15 "Peak detect" on alsa_input.pci-0000_00_14.2.analog-stereo with sample spec float32le 1ch 25Hz and channel map mono
( 326.322| 0.000) I: [pulseaudio] source-output.c: media.name = "Peak detect"
( 326.322| 0.000) I: [pulseaudio] source-output.c: application.name = "PulseAudio Volume Control"
( 326.322| 0.000) I: [pulseaudio] source-output.c: native-protocol.peer = "UNIX socket client"
( 326.322| 0.000) I: [pulseaudio] source-output.c: native-protocol.version = "29"
( 326.322| 0.000) I: [pulseaudio] source-output.c: application.id = "org.PulseAudio.pavucontrol"
( 326.322| 0.000) I: [pulseaudio] source-output.c: application.icon_name = "audio-card"
( 326.322| 0.000) I: [pulseaudio] source-output.c: application.version = "2.0"
( 326.322| 0.000) I: [pulseaudio] source-output.c: application.process.id = "5701"
( 326.322| 0.000) I: [pulseaudio] source-output.c: application.process.user = "david"
( 326.322| 0.000) I: [pulseaudio] source-output.c: application.process.host = "fuileach"
( 326.322| 0.000) I: [pulseaudio] source-output.c: application.process.binary = "pavucontrol"
( 326.322| 0.000) I: [pulseaudio] source-output.c: application.language = "ga_IE.UTF-8"
( 326.322| 0.000) I: [pulseaudio] source-output.c: window.x11.display = ":0"
( 326.322| 0.000) I: [pulseaudio] source-output.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 326.322| 0.000) I: [pulseaudio] source-output.c: application.process.session_id = "1"
( 326.322| 0.000) I: [pulseaudio] source-output.c: module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
( 326.323| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0
( 326.323| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0
( 326.323| 0.000) I: [pulseaudio] protocol-native.c: Final latency 180.14 ms = 80.00 ms + 100.14 ms
( 326.323| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: Requested volume: front-left: 44205 / 67% / -10.26 dB, front-right: 44205 / 67% / -10.26 dB
( 326.323| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: Got hardware volume: front-left: 41350 / 63% / -12.00 dB, front-right: 41350 / 63% / -12.00 dB
( 326.323| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: Calculated software volume: front-left: 70061 / 107% / 1.74 dB, front-right: 70061 / 107% / 1.74 dB (accurate-enough=no)
( 326.323| 0.000) D: [alsa-source-CX20756 Analog] source.c: Volume not changing
( 326.323| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 326.327| 0.003) D: [pulseaudio] module-intended-roles.c: Not setting device for stream Peak detect, because already set.
( 326.327| 0.000) D: [pulseaudio] source-output.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\""
( 326.327| 0.000) I: [pulseaudio] source-output.c: Trying to change sample rate
( 326.327| 0.000) I: [pulseaudio] source.c: Cannot update rate, SOURCE_IS_RUNNING, will keep using 44100 Hz
( 326.327| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for source output source-output-by-application-id:org.PulseAudio.pavucontrol.
( 326.327| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 326.327| 0.000) D: [pulseaudio] resampler.c: Channel matrix:
( 326.327| 0.000) D: [pulseaudio] resampler.c: I00 I01
( 326.327| 0.000) D: [pulseaudio] resampler.c: +------------
( 326.327| 0.000) D: [pulseaudio] resampler.c: O00 | 0.500 0.500
( 326.327| 0.000) I: [pulseaudio] remap.c: Using generic matrix remapping
( 326.327| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 326.327| 0.000) D: [pulseaudio] resampler.c: rate 44100 -> 25 (method peaks)
( 326.327| 0.000) D: [pulseaudio] resampler.c: format s16le -> float32le (intermediate s16le)
( 326.327| 0.000) D: [pulseaudio] resampler.c: channels 2 -> 1 (resampling 1)
( 326.327| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 326.327| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 326.327| 0.000) I: [pulseaudio] source-output.c: Created output 16 "Peak detect" on alsa_output.pci-0000_00_14.2.analog-stereo.monitor with sample spec float32le 1ch 25Hz and channel map mono
( 326.327| 0.000) I: [pulseaudio] source-output.c: media.name = "Peak detect"
( 326.327| 0.000) I: [pulseaudio] source-output.c: application.name = "PulseAudio Volume Control"
( 326.327| 0.000) I: [pulseaudio] source-output.c: native-protocol.peer = "UNIX socket client"
( 326.327| 0.000) I: [pulseaudio] source-output.c: native-protocol.version = "29"
( 326.327| 0.000) I: [pulseaudio] source-output.c: application.id = "org.PulseAudio.pavucontrol"
( 326.327| 0.000) I: [pulseaudio] source-output.c: application.icon_name = "audio-card"
( 326.327| 0.000) I: [pulseaudio] source-output.c: application.version = "2.0"
( 326.327| 0.000) I: [pulseaudio] source-output.c: application.process.id = "5701"
( 326.327| 0.000) I: [pulseaudio] source-output.c: application.process.user = "david"
( 326.327| 0.000) I: [pulseaudio] source-output.c: application.process.host = "fuileach"
( 326.327| 0.000) I: [pulseaudio] source-output.c: application.process.binary = "pavucontrol"
( 326.327| 0.000) I: [pulseaudio] source-output.c: application.language = "ga_IE.UTF-8"
( 326.327| 0.000) I: [pulseaudio] source-output.c: window.x11.display = ":0"
( 326.327| 0.000) I: [pulseaudio] source-output.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 326.327| 0.000) I: [pulseaudio] source-output.c: application.process.session_id = "1"
( 326.327| 0.000) I: [pulseaudio] source-output.c: module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
( 326.328| 0.001) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0
( 326.328| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0
( 326.328| 0.000) I: [pulseaudio] protocol-native.c: Final latency 180.14 ms = 80.00 ms + 100.14 ms
( 328.863| 2.534) D: [alsa-sink-CX20756 Analog] ratelimit.c: 376 events suppressed
( 328.863| 0.000) D: [alsa-sink-CX20756 Analog] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 328.863| 0.000) D: [alsa-sink-CX20756 Analog] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 328.863| 0.000) D: [alsa-sink-CX20756 Analog] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 328.863| 0.000) D: [alsa-sink-CX20756 Analog] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 328.863| 0.000) D: [alsa-sink-CX20756 Analog] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 328.863| 0.000) D: [alsa-sink-CX20756 Analog] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 328.863| 0.000) D: [alsa-sink-CX20756 Analog] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 328.863| 0.000) D: [alsa-sink-CX20756 Analog] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 328.863| 0.000) D: [alsa-sink-CX20756 Analog] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 328.863| 0.000) D: [alsa-sink-CX20756 Analog] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 328.863| 0.000) D: [alsa-sink-CX20756 Analog] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 330.778| 1.914) D: [alsa-sink-CX20756 Analog] sink-input.c: Requesting rewind due to corking
( 330.778| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 330.778| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 17380 bytes.
( 330.778| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 4345
( 330.778| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 4345
( 330.778| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 17380 bytes.
( 330.778| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 330.778| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 0
( 330.778| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Have to rewind 17380 bytes on render memblockq.
( 330.778| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Have to rewind 34760 bytes on implementor.
( 330.778| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 330.778| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17512 bytes ago (152 bytes ahead in playback buffer)
( 330.779| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17528 bytes ago (136 bytes ahead in playback buffer)
( 330.779| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17584 bytes ago (80 bytes ahead in playback buffer)
( 330.779| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17608 bytes ago (56 bytes ahead in playback buffer)
( 330.779| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17636 bytes ago (28 bytes ahead in playback buffer)
( 330.779| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17652 bytes ago (12 bytes ahead in playback buffer)
( 330.781| 0.001) I: [pulseaudio] source-output.c: Freeing output 16 "Peak detect"
( 330.781| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 30401 / 46% / -20.02 dB, front-right: 30401 / 46% / -20.02 dB
( 330.781| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 30419 / 46% / -20.00 dB, front-right: 30419 / 46% / -20.00 dB
( 330.781| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65497 / 100% / -0.02 dB, front-right: 65497 / 100% / -0.02 dB (accurate-enough=yes)
( 330.781| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 30401 at 4108224837
( 330.781| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 330.781| 0.000) I: [pulseaudio] sink-input.c: Freeing input 15 "'180db_' by 'Aphex Twin'"
( 330.781| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 17372 bytes.
( 330.781| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 4343
( 330.781| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 4343
( 330.781| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 17372 bytes.
( 330.781| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 330.781| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 0
( 330.781| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 330.782| 0.000) I: [pulseaudio] client.c: Freed 10 "Clementine"
( 330.782| 0.000) I: [pulseaudio] protocol-native.c: Connection died.
( 330.789| 0.006) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 30401 at 4108224837 was written 35 usec late
( 349.664| 18.875) I: [pulseaudio] client.c: Created 12 "Native client (UNIX socket client)"
( 349.688| 0.024) I: [pulseaudio] client.c: Freed 12 "Native client (UNIX socket client)"
( 349.688| 0.000) I: [pulseaudio] protocol-native.c: Connection died.
( 349.689| 0.000) I: [pulseaudio] client.c: Created 13 "Native client (UNIX socket client)"
( 349.689| 0.000) D: [pulseaudio] protocol-native.c: Protocol version: remote 29, local 29
( 349.689| 0.000) I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
( 349.689| 0.000) D: [pulseaudio] protocol-native.c: SHM possible: yes
( 349.689| 0.000) D: [pulseaudio] protocol-native.c: Negotiated SHM: yes
( 349.689| 0.000) D: [pulseaudio] module-augment-properties.c: Looking for .desktop file for plugin-container
( 349.690| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-application-name:ALSA plug-in [plugin-container].
( 349.690| 0.000) D: [pulseaudio] module-intended-roles.c: Not setting device for stream ALSA Playback, because already set.
( 349.690| 0.000) D: [pulseaudio] sink-input.c: Negotiated format: pcm, format.sample_format = "\"s16le\"" format.rate = "44100" format.channels = "2" format.channel_map = "\"front-left,front-right\""
( 349.690| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for sink input sink-input-by-application-name:ALSA plug-in [plugin-container].
( 349.690| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 349.690| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 349.690| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 349.691| 0.000) I: [pulseaudio] sink-input.c: Created input 16 "ALSA Playback" on alsa_output.pci-0000_00_14.2.analog-stereo with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
( 349.691| 0.000) I: [pulseaudio] sink-input.c: media.name = "ALSA Playback"
( 349.691| 0.000) I: [pulseaudio] sink-input.c: application.name = "ALSA plug-in [plugin-container]"
( 349.691| 0.000) I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
( 349.691| 0.000) I: [pulseaudio] sink-input.c: native-protocol.version = "29"
( 349.691| 0.000) I: [pulseaudio] sink-input.c: application.process.id = "5919"
( 349.691| 0.000) I: [pulseaudio] sink-input.c: application.process.user = "david"
( 349.691| 0.000) I: [pulseaudio] sink-input.c: application.process.host = "fuileach"
( 349.691| 0.000) I: [pulseaudio] sink-input.c: application.process.binary = "plugin-container"
( 349.691| 0.000) I: [pulseaudio] sink-input.c: window.x11.display = ":0"
( 349.691| 0.000) I: [pulseaudio] sink-input.c: application.language = "ga_IE.UTF-8"
( 349.691| 0.000) I: [pulseaudio] sink-input.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 349.691| 0.000) I: [pulseaudio] sink-input.c: application.process.session_id = "1"
( 349.691| 0.000) I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-application-name:ALSA plug-in [plugin-container]"
( 349.691| 0.000) I: [pulseaudio] protocol-native.c: Requested tlength=500.00 ms, minreq=20.00 ms
( 349.691| 0.000) D: [pulseaudio] protocol-native.c: Early requests mode enabled, configuring sink latency to minreq.
( 349.691| 0.000) D: [pulseaudio] protocol-native.c: Requested latency=20.00 ms, Received latency=100.14 ms
( 349.691| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=88200, base=4, prebuf=3528, minreq=17660 maxrewind=0
( 349.691| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=88200, base=4, prebuf=3528, minreq=17660 maxrewind=0
( 349.691| 0.000) I: [pulseaudio] protocol-native.c: Final latency 600.14 ms = 299.77 ms + 2*100.11 ms + 100.14 ms
( 349.692| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 30401 / 46% / -20.02 dB, front-right: 30401 / 46% / -20.02 dB
( 349.692| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 30419 / 46% / -20.00 dB, front-right: 30419 / 46% / -20.00 dB
( 349.692| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65497 / 100% / -0.02 dB, front-right: 65497 / 100% / -0.02 dB (accurate-enough=yes)
( 349.692| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume not changing
( 349.694| 0.002) D: [alsa-sink-CX20756 Analog] protocol-native.c: Requesting rewind due to end of underrun.
( 349.694| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 349.695| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 17384 bytes.
( 349.695| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 4346
( 349.695| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 4346
( 349.695| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 17384 bytes.
( 349.695| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 349.695| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 0
( 349.695| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Have to rewind 17384 bytes on render memblockq.
( 349.695| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 349.695| 0.000) D: [alsa-sink-CX20756 Analog] protocol-native.c: Implicit underrun of 'ALSA Playback'
( 349.695| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 13984 bytes ago (3680 bytes ahead in playback buffer)
( 349.695| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 14016 bytes ago (3648 bytes ahead in playback buffer)
( 349.695| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 14036 bytes ago (3628 bytes ahead in playback buffer)
( 349.696| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 14072 bytes ago (3592 bytes ahead in playback buffer)
( 349.696| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 14084 bytes ago (3580 bytes ahead in playback buffer)
( 349.696| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 14168 bytes ago (3492 bytes ahead in playback buffer)
( 349.696| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 14196 bytes ago (3468 bytes ahead in playback buffer)
( 349.696| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 14220 bytes ago (3444 bytes ahead in playback buffer)
( 349.697| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 14260 bytes ago (3400 bytes ahead in playback buffer)
( 349.697| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 14292 bytes ago (3372 bytes ahead in playback buffer)
( 349.697| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 14308 bytes ago (3356 bytes ahead in playback buffer)
( 349.697| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 14352 bytes ago (3312 bytes ahead in playback buffer)
( 349.697| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 14372 bytes ago (3292 bytes ahead in playback buffer)
( 349.697| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 14400 bytes ago (3264 bytes ahead in playback buffer)
( 349.698| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 14416 bytes ago (3248 bytes ahead in playback buffer)
( 349.698| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 14444 bytes ago (3220 bytes ahead in playback buffer)
( 349.698| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 14484 bytes ago (3180 bytes ahead in playback buffer)
( 349.698| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 14536 bytes ago (3128 bytes ahead in playback buffer)
( 349.698| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 14572 bytes ago (3092 bytes ahead in playback buffer)
( 349.699| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 14620 bytes ago (3044 bytes ahead in playback buffer)
( 349.699| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 14636 bytes ago (3028 bytes ahead in playback buffer)
( 349.699| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 14672 bytes ago (2992 bytes ahead in playback buffer)
( 349.699| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 14700 bytes ago (2964 bytes ahead in playback buffer)
( 349.702| 0.002) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 15164 bytes ago (2500 bytes ahead in playback buffer)
( 349.702| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 30401 / 46% / -20.02 dB, front-right: 30401 / 46% / -20.02 dB
( 349.702| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 30419 / 46% / -20.00 dB, front-right: 30419 / 46% / -20.00 dB
( 349.702| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65497 / 100% / -0.02 dB, front-right: 65497 / 100% / -0.02 dB (accurate-enough=yes)
( 349.702| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume not changing
( 349.702| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 349.702| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 17344 bytes.
( 349.702| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 4336
( 349.702| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 4336
( 349.702| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 17344 bytes.
( 349.702| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 349.702| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 0
( 349.702| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 349.703| 0.000) I: [pulseaudio] sink-input.c: Freeing input 16 "ALSA Playback"
( 349.706| 0.003) I: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-application-name:ALSA plug-in [plugin-container].
( 349.706| 0.000) D: [pulseaudio] module-intended-roles.c: Not setting device for stream ALSA Playback, because already set.
( 349.706| 0.000) D: [pulseaudio] sink-input.c: Negotiated format: pcm, format.sample_format = "\"s16le\"" format.rate = "44100" format.channels = "2" format.channel_map = "\"front-left,front-right\""
( 349.706| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for sink input sink-input-by-application-name:ALSA plug-in [plugin-container].
( 349.706| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 349.706| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 349.706| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 349.706| 0.000) I: [pulseaudio] sink-input.c: Created input 17 "ALSA Playback" on alsa_output.pci-0000_00_14.2.analog-stereo with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
( 349.706| 0.000) I: [pulseaudio] sink-input.c: media.name = "ALSA Playback"
( 349.706| 0.000) I: [pulseaudio] sink-input.c: application.name = "ALSA plug-in [plugin-container]"
( 349.706| 0.000) I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
( 349.706| 0.000) I: [pulseaudio] sink-input.c: native-protocol.version = "29"
( 349.706| 0.000) I: [pulseaudio] sink-input.c: application.process.id = "5919"
( 349.706| 0.000) I: [pulseaudio] sink-input.c: application.process.user = "david"
( 349.706| 0.000) I: [pulseaudio] sink-input.c: application.process.host = "fuileach"
( 349.706| 0.000) I: [pulseaudio] sink-input.c: application.process.binary = "plugin-container"
( 349.706| 0.000) I: [pulseaudio] sink-input.c: window.x11.display = ":0"
( 349.706| 0.000) I: [pulseaudio] sink-input.c: application.language = "ga_IE.UTF-8"
( 349.706| 0.000) I: [pulseaudio] sink-input.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 349.706| 0.000) I: [pulseaudio] sink-input.c: application.process.session_id = "1"
( 349.706| 0.000) I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-application-name:ALSA plug-in [plugin-container]"
( 349.706| 0.000) I: [pulseaudio] protocol-native.c: Requested tlength=500.00 ms, minreq=20.00 ms
( 349.706| 0.000) D: [pulseaudio] protocol-native.c: Early requests mode enabled, configuring sink latency to minreq.
( 349.706| 0.000) D: [pulseaudio] protocol-native.c: Requested latency=20.00 ms, Received latency=100.14 ms
( 349.706| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=88200, base=4, prebuf=70544, minreq=17660 maxrewind=0
( 349.707| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=88200, base=4, prebuf=70544, minreq=17660 maxrewind=0
( 349.707| 0.000) I: [pulseaudio] protocol-native.c: Final latency 600.14 ms = 299.77 ms + 2*100.11 ms + 100.14 ms
( 349.707| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 30401 / 46% / -20.02 dB, front-right: 30401 / 46% / -20.02 dB
( 349.707| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 30419 / 46% / -20.00 dB, front-right: 30419 / 46% / -20.00 dB
( 349.707| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65497 / 100% / -0.02 dB, front-right: 65497 / 100% / -0.02 dB (accurate-enough=yes)
( 349.707| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume not changing
( 349.711| 0.004) D: [alsa-sink-CX20756 Analog] protocol-native.c: Requesting rewind due to end of underrun.
( 349.711| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 349.711| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 17392 bytes.
( 349.711| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 4348
( 349.711| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 4348
( 349.711| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 17392 bytes.
( 349.711| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 349.711| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 0
( 349.711| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Have to rewind 17392 bytes on render memblockq.
( 349.711| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 349.747| 0.036) D: [pulseaudio] module-intended-roles.c: Not setting device for stream Peak detect, because already set.
( 349.747| 0.000) D: [pulseaudio] source-output.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\""
( 349.747| 0.000) I: [pulseaudio] source-output.c: Trying to change sample rate
( 349.747| 0.000) I: [pulseaudio] source.c: Cannot update rate, SOURCE_IS_RUNNING, will keep using 44100 Hz
( 349.748| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for source output source-output-by-application-id:org.PulseAudio.pavucontrol.
( 349.748| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 349.748| 0.000) D: [pulseaudio] resampler.c: Channel matrix:
( 349.748| 0.000) D: [pulseaudio] resampler.c: I00 I01
( 349.748| 0.000) D: [pulseaudio] resampler.c: +------------
( 349.748| 0.000) D: [pulseaudio] resampler.c: O00 | 0.500 0.500
( 349.748| 0.000) I: [pulseaudio] remap.c: Using generic matrix remapping
( 349.748| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 349.748| 0.000) D: [pulseaudio] resampler.c: rate 44100 -> 25 (method peaks)
( 349.748| 0.000) D: [pulseaudio] resampler.c: format s16le -> float32le (intermediate s16le)
( 349.748| 0.000) D: [pulseaudio] resampler.c: channels 2 -> 1 (resampling 1)
( 349.748| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 349.748| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 349.748| 0.000) I: [pulseaudio] source-output.c: Created output 17 "Peak detect" on alsa_output.pci-0000_00_14.2.analog-stereo.monitor with sample spec float32le 1ch 25Hz and channel map mono
( 349.748| 0.000) I: [pulseaudio] source-output.c: media.name = "Peak detect"
( 349.748| 0.000) I: [pulseaudio] source-output.c: application.name = "PulseAudio Volume Control"
( 349.748| 0.000) I: [pulseaudio] source-output.c: native-protocol.peer = "UNIX socket client"
( 349.748| 0.000) I: [pulseaudio] source-output.c: native-protocol.version = "29"
( 349.748| 0.000) I: [pulseaudio] source-output.c: application.id = "org.PulseAudio.pavucontrol"
( 349.748| 0.000) I: [pulseaudio] source-output.c: application.icon_name = "audio-card"
( 349.748| 0.000) I: [pulseaudio] source-output.c: application.version = "2.0"
( 349.748| 0.000) I: [pulseaudio] source-output.c: application.process.id = "5701"
( 349.748| 0.000) I: [pulseaudio] source-output.c: application.process.user = "david"
( 349.748| 0.000) I: [pulseaudio] source-output.c: application.process.host = "fuileach"
( 349.748| 0.000) I: [pulseaudio] source-output.c: application.process.binary = "pavucontrol"
( 349.748| 0.000) I: [pulseaudio] source-output.c: application.language = "ga_IE.UTF-8"
( 349.748| 0.000) I: [pulseaudio] source-output.c: window.x11.display = ":0"
( 349.748| 0.000) I: [pulseaudio] source-output.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 349.748| 0.000) I: [pulseaudio] source-output.c: application.process.session_id = "1"
( 349.748| 0.000) I: [pulseaudio] source-output.c: module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
( 349.748| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0
( 349.748| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0
( 349.748| 0.000) I: [pulseaudio] protocol-native.c: Final latency 180.14 ms = 80.00 ms + 100.14 ms
( 354.945| 5.197) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 354.946| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 30401 / 46% / -20.02 dB, front-right: 30401 / 46% / -20.02 dB
( 354.946| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 30419 / 46% / -20.00 dB, front-right: 30419 / 46% / -20.00 dB
( 354.946| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65497 / 100% / -0.02 dB, front-right: 65497 / 100% / -0.02 dB (accurate-enough=yes)
( 354.946| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume not changing
( 354.979| 0.033) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 354.980| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 36955 / 56% / -14.93 dB, front-right: 36955 / 56% / -14.93 dB
( 354.980| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 37137 / 57% / -14.80 dB, front-right: 37137 / 57% / -14.80 dB
( 354.980| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65215 / 100% / -0.13 dB, front-right: 65215 / 100% / -0.13 dB (accurate-enough=yes)
( 354.980| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 36955 at 4132423780
( 354.980| 0.000) D: [alsa-sink-CX20756 Analog] ratelimit.c: 66 events suppressed
( 354.980| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 7972 usec
( 354.980| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 354.980| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 7815 usec
( 354.980| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 7523 usec
( 354.981| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 6942 usec
( 354.981| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 6876 usec
( 354.982| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 6353 usec
( 354.982| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 6297 usec
( 354.982| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 5778 usec
( 354.982| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 5710 usec
( 354.983| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 5191 usec
( 354.983| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Next volume change in 5100 usec
( 354.988| 0.005) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 36955 at 4132423780 was written 44 usec late
( 355.012| 0.024) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 356.997| 1.984) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 43509 / 66% / -10.67 dB, front-right: 43509 / 66% / -10.67 dB
( 356.997| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 43633 / 67% / -10.60 dB, front-right: 43633 / 67% / -10.60 dB
( 356.997| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65350 / 100% / -0.07 dB, front-right: 65350 / 100% / -0.07 dB (accurate-enough=yes)
( 356.997| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 43509 at 4134440564
( 356.997| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 356.998| 0.001) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 356.998| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 50063 / 76% / -7.02 dB, front-right: 50063 / 76% / -7.02 dB
( 356.998| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 50097 / 76% / -7.00 dB, front-right: 50097 / 76% / -7.00 dB
( 356.998| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65492 / 100% / -0.02 dB, front-right: 65492 / 100% / -0.02 dB (accurate-enough=yes)
( 356.998| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 50063 at 4134442254
( 356.998| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 357.001| 0.002) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 357.001| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 56617 / 86% / -3.81 dB, front-right: 56617 / 86% / -3.81 dB
( 357.001| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 56643 / 86% / -3.80 dB, front-right: 56643 / 86% / -3.80 dB
( 357.001| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65506 / 100% / -0.01 dB, front-right: 65506 / 100% / -0.01 dB (accurate-enough=yes)
( 357.001| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 56617 at 4134445178
( 357.001| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 357.002| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 357.002| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 63171 / 96% / -0.96 dB, front-right: 63171 / 96% / -0.96 dB
( 357.003| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 63555 / 97% / -0.80 dB, front-right: 63555 / 97% / -0.80 dB
( 357.003| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65140 / 99% / -0.16 dB, front-right: 65140 / 99% / -0.16 dB (accurate-enough=yes)
( 357.003| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 63171 at 4134446513
( 357.003| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 357.003| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 357.003| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
( 357.003| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
( 357.003| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB (accurate-enough=yes)
( 357.003| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 65536 at 4134447229
( 357.003| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 357.004| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 357.004| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
( 357.004| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
( 357.004| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB (accurate-enough=yes)
( 357.004| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 65536 at 4134447788
( 357.004| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 65536 at 4134447229 was dropped
( 357.004| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 357.004| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
( 357.004| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
( 357.004| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB (accurate-enough=yes)
( 357.004| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 65536 at 4134448362
( 357.004| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 65536 at 4134447788 was dropped
( 357.005| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 357.005| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 58982 / 90% / -2.75 dB, front-right: 58982 / 90% / -2.75 dB
( 357.005| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 59312 / 91% / -2.60 dB, front-right: 59312 / 91% / -2.60 dB
( 357.005| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65171 / 99% / -0.15 dB, front-right: 65171 / 99% / -0.15 dB (accurate-enough=yes)
( 357.005| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going up to 58982 at 4134448696
( 357.005| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 63171 at 4134446513 was dropped
( 357.005| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 65536 at 4134448362 was dropped
( 357.005| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 43509 at 4134440564 was written 210 usec late
( 357.005| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 357.005| 0.000) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 359.012| 2.007) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Written HW volume did not match with the request: front-left: 43509 / 66% / -10.67 dB, front-right: 43509 / 66% / -10.67 dB (request) != front-left: 42968 / 66% / -11.00 dB, front-right: 42968 / 66% / -11.00 dB
( 359.013| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 50063 at 4134442254 was written 2006277 usec late
( 359.013| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 56617 at 4134445178 was written 2003353 usec late
( 359.013| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 58982 at 4134448696 was written 1999835 usec late
( 361.024| 2.011) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 52428 / 80% / -5.81 dB, front-right: 52428 / 80% / -5.81 dB
( 361.024| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 52459 / 80% / -5.80 dB, front-right: 52459 / 80% / -5.80 dB
( 361.024| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65497 / 100% / -0.02 dB, front-right: 65497 / 100% / -0.02 dB (accurate-enough=yes)
( 361.024| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 52428 at 4138452283
( 361.024| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 52428 at 4138452283 was written 8031 usec late
( 361.025| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 363.034| 2.009) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 363.035| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 45874 / 70% / -9.29 dB, front-right: 45874 / 70% / -9.29 dB
( 363.035| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 46041 / 70% / -9.20 dB, front-right: 46041 / 70% / -9.20 dB
( 363.035| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65298 / 100% / -0.09 dB, front-right: 65298 / 100% / -0.09 dB (accurate-enough=yes)
( 363.035| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 45874 at 4140462739
( 363.035| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 45874 at 4140462739 was written 8032 usec late
( 363.035| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 365.042| 2.006) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 365.042| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 39320 / 60% / -13.31 dB, front-right: 39320 / 60% / -13.31 dB
( 365.042| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 39490 / 60% / -13.20 dB, front-right: 39490 / 60% / -13.20 dB
( 365.042| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65254 / 100% / -0.11 dB, front-right: 65254 / 100% / -0.11 dB (accurate-enough=yes)
( 365.042| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 39320 at 4142470061
( 365.042| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 39320 at 4142470061 was written 8053 usec late
( 365.042| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 365.043| 0.000) I: [pulseaudio] module-device-restore.c: Synced.
( 367.055| 2.012) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 367.055| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 32766 / 50% / -18.06 dB, front-right: 32766 / 50% / -18.06 dB
( 367.055| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 32846 / 50% / -18.00 dB, front-right: 32846 / 50% / -18.00 dB
( 367.055| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65376 / 100% / -0.06 dB, front-right: 65376 / 100% / -0.06 dB (accurate-enough=yes)
( 367.055| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 32766 at 4144483011
( 367.055| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 32766 at 4144483011 was written 8053 usec late
( 367.055| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 369.066| 2.010) D: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo.
( 369.066| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 26212 / 40% / -23.88 dB, front-right: 26212 / 40% / -23.88 dB
( 369.066| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 26291 / 40% / -23.80 dB, front-right: 26291 / 40% / -23.80 dB
( 369.066| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65339 / 100% / -0.08 dB, front-right: 65339 / 100% / -0.08 dB (accurate-enough=yes)
( 369.066| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume going down to 26212 at 4146493987
( 369.066| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume change to 26212 at 4146493987 was written 8052 usec late
( 369.066| 0.000) I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output.
( 377.055| 7.989) I: [pulseaudio] module-device-restore.c: Synced.
( 384.502| 7.446) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_01.1.hdmi-stereo becomes idle, timeout in 5 seconds.
( 384.502| 0.000) I: [pulseaudio] source-output.c: Freeing output 13 "Peak detect"
( 384.503| 0.000) I: [pulseaudio] source-output.c: Freeing output 14 "Peak detect"
( 384.503| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: Requested volume: front-left: 44205 / 67% / -10.26 dB, front-right: 44205 / 67% / -10.26 dB
( 384.503| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: Got hardware volume: front-left: 41350 / 63% / -12.00 dB, front-right: 41350 / 63% / -12.00 dB
( 384.503| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: Calculated software volume: front-left: 70061 / 107% / 1.74 dB, front-right: 70061 / 107% / 1.74 dB (accurate-enough=no)
( 384.503| 0.000) D: [alsa-source-CX20756 Analog] source.c: Volume not changing
( 384.504| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 384.504| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 384.504| 0.000) I: [pulseaudio] source-output.c: Freeing output 15 "Peak detect"
( 384.504| 0.000) I: [pulseaudio] source-output.c: Freeing output 17 "Peak detect"
( 384.504| 0.000) I: [pulseaudio] client.c: Freed 11 "PulseAudio Volume Control"
( 384.504| 0.000) I: [pulseaudio] protocol-native.c: Connection died.
( 387.745| 3.240) I: [pulseaudio] client.c: Created 14 "Native client (UNIX socket client)"
( 387.819| 0.074) D: [pulseaudio] protocol-native.c: Protocol version: remote 29, local 29
( 387.819| 0.000) I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
( 387.819| 0.000) D: [pulseaudio] protocol-native.c: SHM possible: yes
( 387.819| 0.000) D: [pulseaudio] protocol-native.c: Negotiated SHM: yes
( 387.820| 0.000) D: [pulseaudio] module-augment-properties.c: Looking for .desktop file for pavucontrol
( 387.966| 0.145) D: [pulseaudio] module-stream-restore.c: Not restoring device for stream source-output-by-application-id:org.PulseAudio.pavucontrol, because already set
( 387.966| 0.000) D: [pulseaudio] module-intended-roles.c: Not setting device for stream Peak detect, because already set.
( 387.966| 0.000) D: [pulseaudio] source-output.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\""
( 387.966| 0.000) I: [pulseaudio] source-output.c: Trying to change sample rate
( 387.966| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for source output source-output-by-application-id:org.PulseAudio.pavucontrol.
( 387.966| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_01.1.hdmi-stereo becomes busy, resuming.
( 387.966| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_01.1.hdmi-stereo becomes idle, timeout in 5 seconds.
( 387.966| 0.000) D: [pulseaudio] resampler.c: Channel matrix:
( 387.966| 0.000) D: [pulseaudio] resampler.c: I00 I01
( 387.966| 0.000) D: [pulseaudio] resampler.c: +------------
( 387.966| 0.000) D: [pulseaudio] resampler.c: O00 | 0.500 0.500
( 387.966| 0.000) I: [pulseaudio] remap.c: Using generic matrix remapping
( 387.966| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 387.966| 0.000) D: [pulseaudio] resampler.c: rate 44100 -> 25 (method peaks)
( 387.966| 0.000) D: [pulseaudio] resampler.c: format s16le -> float32le (intermediate s16le)
( 387.966| 0.000) D: [pulseaudio] resampler.c: channels 2 -> 1 (resampling 1)
( 387.966| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 387.966| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 387.966| 0.000) I: [pulseaudio] source-output.c: Created output 18 "Peak detect" on alsa_output.pci-0000_00_01.1.hdmi-stereo.monitor with sample spec float32le 1ch 25Hz and channel map mono
( 387.966| 0.000) I: [pulseaudio] source-output.c: media.name = "Peak detect"
( 387.966| 0.000) I: [pulseaudio] source-output.c: application.name = "PulseAudio Volume Control"
( 387.966| 0.000) I: [pulseaudio] source-output.c: native-protocol.peer = "UNIX socket client"
( 387.966| 0.000) I: [pulseaudio] source-output.c: native-protocol.version = "29"
( 387.966| 0.000) I: [pulseaudio] source-output.c: application.id = "org.PulseAudio.pavucontrol"
( 387.966| 0.000) I: [pulseaudio] source-output.c: application.icon_name = "audio-card"
( 387.966| 0.000) I: [pulseaudio] source-output.c: application.version = "2.0"
( 387.966| 0.000) I: [pulseaudio] source-output.c: application.process.id = "6297"
( 387.966| 0.000) I: [pulseaudio] source-output.c: application.process.user = "david"
( 387.966| 0.000) I: [pulseaudio] source-output.c: application.process.host = "fuileach"
( 387.966| 0.000) I: [pulseaudio] source-output.c: application.process.binary = "pavucontrol"
( 387.966| 0.000) I: [pulseaudio] source-output.c: application.language = "ga_IE.UTF-8"
( 387.966| 0.000) I: [pulseaudio] source-output.c: window.x11.display = ":0"
( 387.966| 0.000) I: [pulseaudio] source-output.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 387.966| 0.000) I: [pulseaudio] source-output.c: application.process.session_id = "1"
( 387.966| 0.000) I: [pulseaudio] source-output.c: module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
( 387.967| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0
( 387.967| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0
( 387.967| 0.000) I: [pulseaudio] protocol-native.c: Final latency 180.14 ms = 80.00 ms + 100.14 ms
( 387.967| 0.000) D: [pulseaudio] module-stream-restore.c: Not restoring device for stream source-output-by-application-id:org.PulseAudio.pavucontrol, because already set
( 387.967| 0.000) D: [pulseaudio] module-intended-roles.c: Not setting device for stream Peak detect, because already set.
( 387.967| 0.000) D: [pulseaudio] source-output.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\""
( 387.967| 0.000) I: [pulseaudio] source-output.c: Trying to change sample rate
( 387.967| 0.000) I: [pulseaudio] source.c: Cannot update rate, this is a monitor source and the sink is running.
( 387.967| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for source output source-output-by-application-id:org.PulseAudio.pavucontrol.
( 387.967| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 387.967| 0.000) D: [pulseaudio] resampler.c: Channel matrix:
( 387.967| 0.000) D: [pulseaudio] resampler.c: I00 I01
( 387.967| 0.000) D: [pulseaudio] resampler.c: +------------
( 387.967| 0.000) D: [pulseaudio] resampler.c: O00 | 0.500 0.500
( 387.968| 0.000) I: [pulseaudio] remap.c: Using generic matrix remapping
( 387.968| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 387.968| 0.000) D: [pulseaudio] resampler.c: rate 44100 -> 25 (method peaks)
( 387.968| 0.000) D: [pulseaudio] resampler.c: format s16le -> float32le (intermediate s16le)
( 387.968| 0.000) D: [pulseaudio] resampler.c: channels 2 -> 1 (resampling 1)
( 387.968| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 387.968| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 387.968| 0.000) I: [pulseaudio] source-output.c: Created output 19 "Peak detect" on alsa_output.pci-0000_00_14.2.analog-stereo.monitor with sample spec float32le 1ch 25Hz and channel map mono
( 387.968| 0.000) I: [pulseaudio] source-output.c: media.name = "Peak detect"
( 387.968| 0.000) I: [pulseaudio] source-output.c: application.name = "PulseAudio Volume Control"
( 387.968| 0.000) I: [pulseaudio] source-output.c: native-protocol.peer = "UNIX socket client"
( 387.968| 0.000) I: [pulseaudio] source-output.c: native-protocol.version = "29"
( 387.968| 0.000) I: [pulseaudio] source-output.c: application.id = "org.PulseAudio.pavucontrol"
( 387.968| 0.000) I: [pulseaudio] source-output.c: application.icon_name = "audio-card"
( 387.968| 0.000) I: [pulseaudio] source-output.c: application.version = "2.0"
( 387.968| 0.000) I: [pulseaudio] source-output.c: application.process.id = "6297"
( 387.968| 0.000) I: [pulseaudio] source-output.c: application.process.user = "david"
( 387.968| 0.000) I: [pulseaudio] source-output.c: application.process.host = "fuileach"
( 387.968| 0.000) I: [pulseaudio] source-output.c: application.process.binary = "pavucontrol"
( 387.968| 0.000) I: [pulseaudio] source-output.c: application.language = "ga_IE.UTF-8"
( 387.968| 0.000) I: [pulseaudio] source-output.c: window.x11.display = ":0"
( 387.968| 0.000) I: [pulseaudio] source-output.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 387.968| 0.000) I: [pulseaudio] source-output.c: application.process.session_id = "1"
( 387.968| 0.000) I: [pulseaudio] source-output.c: module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
( 387.968| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0
( 387.968| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0
( 387.968| 0.000) I: [pulseaudio] protocol-native.c: Final latency 180.14 ms = 80.00 ms + 100.14 ms
( 387.969| 0.001) D: [pulseaudio] module-stream-restore.c: Not restoring device for stream source-output-by-application-id:org.PulseAudio.pavucontrol, because already set
( 387.970| 0.000) D: [pulseaudio] module-intended-roles.c: Not setting device for stream Peak detect, because already set.
( 387.970| 0.000) D: [pulseaudio] source-output.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\""
( 387.970| 0.000) I: [pulseaudio] source-output.c: Trying to change sample rate
( 387.970| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for source output source-output-by-application-id:org.PulseAudio.pavucontrol.
( 387.970| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 387.970| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 387.970| 0.000) D: [pulseaudio] resampler.c: Channel matrix:
( 387.970| 0.000) D: [pulseaudio] resampler.c: I00 I01
( 387.970| 0.000) D: [pulseaudio] resampler.c: +------------
( 387.970| 0.000) D: [pulseaudio] resampler.c: O00 | 0.500 0.500
( 387.970| 0.000) I: [pulseaudio] remap.c: Using generic matrix remapping
( 387.970| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 387.970| 0.000) D: [pulseaudio] resampler.c: rate 44100 -> 25 (method peaks)
( 387.970| 0.000) D: [pulseaudio] resampler.c: format s16le -> float32le (intermediate s16le)
( 387.970| 0.000) D: [pulseaudio] resampler.c: channels 2 -> 1 (resampling 1)
( 387.970| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 387.970| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 387.970| 0.000) I: [pulseaudio] source-output.c: Created output 20 "Peak detect" on alsa_input.pci-0000_00_14.2.analog-stereo with sample spec float32le 1ch 25Hz and channel map mono
( 387.970| 0.000) I: [pulseaudio] source-output.c: media.name = "Peak detect"
( 387.970| 0.000) I: [pulseaudio] source-output.c: application.name = "PulseAudio Volume Control"
( 387.970| 0.000) I: [pulseaudio] source-output.c: native-protocol.peer = "UNIX socket client"
( 387.970| 0.000) I: [pulseaudio] source-output.c: native-protocol.version = "29"
( 387.970| 0.000) I: [pulseaudio] source-output.c: application.id = "org.PulseAudio.pavucontrol"
( 387.970| 0.000) I: [pulseaudio] source-output.c: application.icon_name = "audio-card"
( 387.970| 0.000) I: [pulseaudio] source-output.c: application.version = "2.0"
( 387.970| 0.000) I: [pulseaudio] source-output.c: application.process.id = "6297"
( 387.970| 0.000) I: [pulseaudio] source-output.c: application.process.user = "david"
( 387.970| 0.000) I: [pulseaudio] source-output.c: application.process.host = "fuileach"
( 387.970| 0.000) I: [pulseaudio] source-output.c: application.process.binary = "pavucontrol"
( 387.970| 0.000) I: [pulseaudio] source-output.c: application.language = "ga_IE.UTF-8"
( 387.970| 0.000) I: [pulseaudio] source-output.c: window.x11.display = ":0"
( 387.970| 0.000) I: [pulseaudio] source-output.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 387.970| 0.000) I: [pulseaudio] source-output.c: application.process.session_id = "1"
( 387.970| 0.000) I: [pulseaudio] source-output.c: module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
( 387.970| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0
( 387.971| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0
( 387.971| 0.000) I: [pulseaudio] protocol-native.c: Final latency 180.14 ms = 80.00 ms + 100.14 ms
( 387.971| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: Requested volume: front-left: 44205 / 67% / -10.26 dB, front-right: 44205 / 67% / -10.26 dB
( 387.971| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: Got hardware volume: front-left: 41350 / 63% / -12.00 dB, front-right: 41350 / 63% / -12.00 dB
( 387.971| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: Calculated software volume: front-left: 70061 / 107% / 1.74 dB, front-right: 70061 / 107% / 1.74 dB (accurate-enough=no)
( 387.971| 0.000) D: [alsa-source-CX20756 Analog] source.c: Volume not changing
( 387.989| 0.018) D: [pulseaudio] module-intended-roles.c: Not setting device for stream Peak detect, because already set.
( 387.989| 0.000) D: [pulseaudio] source-output.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\""
( 387.989| 0.000) I: [pulseaudio] source-output.c: Trying to change sample rate
( 387.989| 0.000) I: [pulseaudio] source.c: Cannot update rate, SOURCE_IS_RUNNING, will keep using 44100 Hz
( 387.989| 0.000) I: [pulseaudio] module-stream-restore.c: Restoring mute state for source output source-output-by-application-id:org.PulseAudio.pavucontrol.
( 387.989| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
( 387.989| 0.000) D: [pulseaudio] resampler.c: Channel matrix:
( 387.989| 0.000) D: [pulseaudio] resampler.c: I00 I01
( 387.989| 0.000) D: [pulseaudio] resampler.c: +------------
( 387.989| 0.000) D: [pulseaudio] resampler.c: O00 | 0.500 0.500
( 387.989| 0.000) I: [pulseaudio] remap.c: Using generic matrix remapping
( 387.989| 0.000) D: [pulseaudio] resampler.c: Resampler:
( 387.989| 0.000) D: [pulseaudio] resampler.c: rate 44100 -> 25 (method peaks)
( 387.989| 0.000) D: [pulseaudio] resampler.c: format s16le -> float32le (intermediate s16le)
( 387.989| 0.000) D: [pulseaudio] resampler.c: channels 2 -> 1 (resampling 1)
( 387.989| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
( 387.989| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
( 387.990| 0.000) I: [pulseaudio] source-output.c: Created output 21 "Peak detect" on alsa_output.pci-0000_00_14.2.analog-stereo.monitor with sample spec float32le 1ch 25Hz and channel map mono
( 387.990| 0.000) I: [pulseaudio] source-output.c: media.name = "Peak detect"
( 387.990| 0.000) I: [pulseaudio] source-output.c: application.name = "PulseAudio Volume Control"
( 387.990| 0.000) I: [pulseaudio] source-output.c: native-protocol.peer = "UNIX socket client"
( 387.990| 0.000) I: [pulseaudio] source-output.c: native-protocol.version = "29"
( 387.990| 0.000) I: [pulseaudio] source-output.c: application.id = "org.PulseAudio.pavucontrol"
( 387.990| 0.000) I: [pulseaudio] source-output.c: application.icon_name = "audio-card"
( 387.990| 0.000) I: [pulseaudio] source-output.c: application.version = "2.0"
( 387.990| 0.000) I: [pulseaudio] source-output.c: application.process.id = "6297"
( 387.990| 0.000) I: [pulseaudio] source-output.c: application.process.user = "david"
( 387.990| 0.000) I: [pulseaudio] source-output.c: application.process.host = "fuileach"
( 387.990| 0.000) I: [pulseaudio] source-output.c: application.process.binary = "pavucontrol"
( 387.990| 0.000) I: [pulseaudio] source-output.c: application.language = "ga_IE.UTF-8"
( 387.990| 0.000) I: [pulseaudio] source-output.c: window.x11.display = ":0"
( 387.990| 0.000) I: [pulseaudio] source-output.c: application.process.machine_id = "fb75a029cab0d31b5676ade754660933"
( 387.990| 0.000) I: [pulseaudio] source-output.c: application.process.session_id = "1"
( 387.990| 0.000) I: [pulseaudio] source-output.c: module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
( 387.990| 0.000) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0
( 387.990| 0.000) D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0
( 387.990| 0.000) I: [pulseaudio] protocol-native.c: Final latency 180.14 ms = 80.00 ms + 100.14 ms
( 390.265| 2.274) D: [pulseaudio] module-stream-restore.c: Client pavucontrol changes entry sink-input-by-media-role:event.
( 390.651| 0.386) D: [pulseaudio] module-stream-restore.c: Client pavucontrol changes entry sink-input-by-media-role:event.
( 394.045| 3.393) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_01.1.hdmi-stereo becomes idle, timeout in 5 seconds.
( 394.045| 0.000) I: [pulseaudio] source-output.c: Freeing output 18 "Peak detect"
( 394.046| 0.000) I: [pulseaudio] source-output.c: Freeing output 19 "Peak detect"
( 394.046| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: Requested volume: front-left: 44205 / 67% / -10.26 dB, front-right: 44205 / 67% / -10.26 dB
( 394.046| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: Got hardware volume: front-left: 41350 / 63% / -12.00 dB, front-right: 41350 / 63% / -12.00 dB
( 394.046| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: Calculated software volume: front-left: 70061 / 107% / 1.74 dB, front-right: 70061 / 107% / 1.74 dB (accurate-enough=no)
( 394.046| 0.000) D: [alsa-source-CX20756 Analog] source.c: Volume not changing
( 394.046| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 394.046| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 394.046| 0.000) I: [pulseaudio] source-output.c: Freeing output 20 "Peak detect"
( 394.046| 0.000) I: [pulseaudio] source-output.c: Freeing output 21 "Peak detect"
( 394.047| 0.000) I: [pulseaudio] client.c: Freed 14 "PulseAudio Volume Control"
( 394.047| 0.000) I: [pulseaudio] protocol-native.c: Connection died.
( 399.045| 4.998) I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_01.1.hdmi-stereo idle for too long, suspending ...
( 399.046| 0.000) D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_01.1.hdmi-stereo is 0x0004, suspending
( 399.048| 0.001) I: [alsa-sink-HDMI 0] alsa-sink.c: Device suspended...
( 399.048| 0.000) I: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_14.2.analog-stereo idle for too long, suspending ...
( 399.048| 0.000) D: [pulseaudio] source.c: Suspend cause of source alsa_input.pci-0000_00_14.2.analog-stereo is 0x0004, suspending
( 399.048| 0.000) I: [alsa-source-CX20756 Analog] alsa-source.c: Device suspended...
( 399.049| 0.000) D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
( 399.049| 0.000) D: [pulseaudio] module-udev-detect.c: Resuming all sinks and sources of card alsa_card.pci-0000_00_01.1.
( 399.049| 0.000) D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC1 is accessible: yes
( 399.049| 0.000) D: [pulseaudio] module-udev-detect.c: Resuming all sinks and sources of card alsa_card.pci-0000_00_14.2.
( 400.266| 1.217) I: [pulseaudio] module-stream-restore.c: Synced.
( 475.431| 75.164) D: [alsa-sink-CX20756 Analog] sink-input.c: Requesting rewind due to corking
( 475.470| 0.038) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 475.470| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 10588 bytes.
( 475.470| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 2647
( 475.470| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 2647
( 475.470| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 10588 bytes.
( 475.470| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 475.470| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 38065
( 475.470| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Have to rewind 10588 bytes on render memblockq.
( 475.470| 0.000) D: [alsa-sink-CX20756 Analog] sink-input.c: Have to rewind 10588 bytes on implementor.
( 475.470| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 475.470| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17452 bytes ago (212 bytes ahead in playback buffer)
( 475.470| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 475.470| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17464 bytes ago (200 bytes ahead in playback buffer)
( 475.470| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17504 bytes ago (160 bytes ahead in playback buffer)
( 475.470| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17516 bytes ago (148 bytes ahead in playback buffer)
( 475.471| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17528 bytes ago (136 bytes ahead in playback buffer)
( 475.471| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17536 bytes ago (128 bytes ahead in playback buffer)
( 475.471| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17548 bytes ago (116 bytes ahead in playback buffer)
( 475.471| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17560 bytes ago (104 bytes ahead in playback buffer)
( 475.471| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17568 bytes ago (96 bytes ahead in playback buffer)
( 475.471| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17576 bytes ago (88 bytes ahead in playback buffer)
( 475.471| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17584 bytes ago (80 bytes ahead in playback buffer)
( 475.471| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17592 bytes ago (72 bytes ahead in playback buffer)
( 475.471| 0.000) D: [alsa-sink-CX20756 Analog] ratelimit.c: 70 events suppressed
( 475.471| 0.000) D: [alsa-sink-CX20756 Analog] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 475.471| 0.000) D: [alsa-sink-CX20756 Analog] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 475.471| 0.000) D: [alsa-sink-CX20756 Analog] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 475.471| 0.000) D: [alsa-sink-CX20756 Analog] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 475.471| 0.000) D: [alsa-sink-CX20756 Analog] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
( 475.471| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17636 bytes ago (28 bytes ahead in playback buffer)
( 475.471| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Found underrun 17656 bytes ago (8 bytes ahead in playback buffer)
( 475.472| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested volume: front-left: 26212 / 40% / -23.88 dB, front-right: 26212 / 40% / -23.88 dB
( 475.472| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Got hardware volume: front-left: 26291 / 40% / -23.80 dB, front-right: 26291 / 40% / -23.80 dB
( 475.472| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Calculated software volume: front-left: 65339 / 100% / -0.08 dB, front-right: 65339 / 100% / -0.08 dB (accurate-enough=yes)
( 475.472| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Volume not changing
( 475.472| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Requested to rewind 17664 bytes.
( 475.472| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Limited to 17364 bytes.
( 475.472| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: before: 4341
( 475.472| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: after: 4341
( 475.472| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Rewound 17364 bytes.
( 475.473| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: Processing rewind...
( 475.473| 0.000) D: [alsa-sink-CX20756 Analog] sink.c: latency = 40457
( 475.473| 0.000) D: [alsa-sink-CX20756 Analog] source.c: Processing rewind...
( 475.473| 0.000) D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
( 475.473| 0.000) D: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
( 475.480| 0.007) I: [pulseaudio] sink-input.c: Freeing input 17 "ALSA Playback"
( 475.481| 0.000) I: [pulseaudio] client.c: Freed 13 "ALSA plug-in [plugin-container]"
( 475.481| 0.000) I: [pulseaudio] protocol-native.c: Connection died.
( 480.478| 4.997) I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo idle for too long, suspending ...
( 480.478| 0.000) D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_14.2.analog-stereo is 0x0004, suspending
( 480.479| 0.001) I: [alsa-sink-CX20756 Analog] alsa-sink.c: Device suspended...
( 480.479| 0.000) D: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
( 480.483| 0.003) D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC1 is accessible: yes
( 480.483| 0.000) D: [pulseaudio] module-udev-detect.c: Resuming all sinks and sources of card alsa_card.pci-0000_00_14.2.
( 514.224| 33.741) I: [pulseaudio] main.c: Got signal SIGINT.
( 514.224| 0.000) I: [pulseaudio] main.c: Exiting.
( 514.224| 0.000) I: [pulseaudio] main.c: Daemon shutdown initiated.
( 514.225| 0.000) I: [pulseaudio] module.c: Unloading "module-filter-apply" (index: #19).
( 514.225| 0.000) I: [pulseaudio] module.c: Unloaded "module-filter-apply" (index: #19).
( 514.225| 0.000) I: [pulseaudio] module.c: Unloading "module-filter-heuristics" (index: #18).
( 514.225| 0.000) I: [pulseaudio] module.c: Unloaded "module-filter-heuristics" (index: #18).
( 514.225| 0.000) I: [pulseaudio] module.c: Unloading "module-role-cork" (index: #17).
( 514.225| 0.000) I: [pulseaudio] module.c: Unloaded "module-role-cork" (index: #17).
( 514.225| 0.000) I: [pulseaudio] module.c: Unloading "module-position-event-sounds" (index: #16).
( 514.225| 0.000) I: [pulseaudio] module.c: Unloaded "module-position-event-sounds" (index: #16).
( 514.225| 0.000) I: [pulseaudio] module.c: Unloading "module-systemd-login" (index: #15).
( 514.225| 0.000) D: [pulseaudio] module-systemd-login.c: Removing session 6
( 514.225| 0.000) I: [pulseaudio] client.c: Freed 0 "Login Session 6"
( 514.225| 0.000) D: [pulseaudio] module-systemd-login.c: Removing session 1
( 514.225| 0.000) I: [pulseaudio] client.c: Freed 1 "Login Session 1"
( 514.225| 0.000) I: [pulseaudio] module.c: Unloaded "module-systemd-login" (index: #15).
( 514.225| 0.000) I: [pulseaudio] module.c: Unloading "module-console-kit" (index: #14).
( 514.225| 0.000) I: [pulseaudio] module.c: Unloaded "module-console-kit" (index: #14).
( 514.225| 0.000) I: [pulseaudio] module.c: Unloading "module-suspend-on-idle" (index: #13).
( 514.225| 0.000) I: [pulseaudio] module.c: Unloaded "module-suspend-on-idle" (index: #13).
( 514.225| 0.000) I: [pulseaudio] module.c: Unloading "module-intended-roles" (index: #12).
( 514.226| 0.000) I: [pulseaudio] module.c: Unloaded "module-intended-roles" (index: #12).
( 514.226| 0.000) I: [pulseaudio] module.c: Unloading "module-always-sink" (index: #11).
( 514.226| 0.000) I: [pulseaudio] module.c: Unloaded "module-always-sink" (index: #11).
( 514.226| 0.000) I: [pulseaudio] module.c: Unloading "module-rescue-streams" (index: #10).
( 514.226| 0.000) I: [pulseaudio] module.c: Unloaded "module-rescue-streams" (index: #10).
( 514.226| 0.000) I: [pulseaudio] module.c: Unloading "module-default-device-restore" (index: #9).
( 514.226| 0.000) I: [pulseaudio] module.c: Unloaded "module-default-device-restore" (index: #9).
( 514.226| 0.000) I: [pulseaudio] module.c: Unloading "module-native-protocol-unix" (index: #8).
( 514.226| 0.000) I: [pulseaudio] client.c: Freed 2 "GNOME Volume Control Media Keys"
( 514.226| 0.000) I: [pulseaudio] client.c: Freed 3 "GNOME Shell Volume Control"
( 514.226| 0.000) D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
( 514.226| 0.000) D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
( 514.226| 0.000) I: [pulseaudio] client.c: Freed 4 "AudioStream"
( 514.226| 0.000) D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
( 514.226| 0.000) D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
( 514.227| 0.000) D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
( 514.227| 0.000) D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
( 514.227| 0.000) D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
( 514.227| 0.000) D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
( 514.227| 0.000) D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
( 514.227| 0.000) D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
( 514.227| 0.000) D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
( 514.227| 0.000) I: [pulseaudio] module.c: Unloaded "module-native-protocol-unix" (index: #8).
( 514.227| 0.000) I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #7).
( 514.227| 0.000) D: [alsa-sink-CX20756 Analog] alsa-sink.c: Thread shutting down
( 514.227| 0.000) I: [pulseaudio] sink.c: Freeing sink 1 "alsa_output.pci-0000_00_14.2.analog-stereo"
( 514.228| 0.000) I: [pulseaudio] source.c: Freeing source 1 "alsa_output.pci-0000_00_14.2.analog-stereo.monitor"
( 514.228| 0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
( 514.228| 0.000) D: [alsa-source-CX20756 Analog] alsa-source.c: Thread shutting down
( 514.228| 0.000) I: [pulseaudio] source.c: Freeing source 2 "alsa_input.pci-0000_00_14.2.analog-stereo"
( 514.228| 0.000) I: [pulseaudio] card.c: Freed 1 "alsa_card.pci-0000_00_14.2"
( 514.229| 0.000) I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #7).
( 514.229| 0.000) I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #6).
( 514.229| 0.000) D: [alsa-sink-HDMI 0] alsa-sink.c: Thread shutting down
( 514.229| 0.000) I: [pulseaudio] sink.c: Freeing sink 0 "alsa_output.pci-0000_00_01.1.hdmi-stereo"
( 514.229| 0.000) I: [pulseaudio] source.c: Freeing source 0 "alsa_output.pci-0000_00_01.1.hdmi-stereo.monitor"
( 514.229| 0.000) I: [pulseaudio] card.c: Freed 0 "alsa_card.pci-0000_00_01.1"
( 514.230| 0.000) I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #6).
( 514.230| 0.000) I: [pulseaudio] module.c: Unloading "module-udev-detect" (index: #5).
( 514.230| 0.000) I: [pulseaudio] module.c: Unloaded "module-udev-detect" (index: #5).
( 514.231| 0.000) I: [pulseaudio] module.c: Unloading "module-switch-on-port-available" (index: #4).
( 514.231| 0.000) I: [pulseaudio] module.c: Unloaded "module-switch-on-port-available" (index: #4).
( 514.231| 0.000) I: [pulseaudio] module.c: Unloading "module-augment-properties" (index: #3).
( 514.231| 0.000) I: [pulseaudio] module.c: Unloaded "module-augment-properties" (index: #3).
( 514.231| 0.000) I: [pulseaudio] module.c: Unloading "module-card-restore" (index: #2).
( 514.231| 0.000) I: [pulseaudio] module.c: Unloaded "module-card-restore" (index: #2).
( 514.231| 0.000) I: [pulseaudio] module.c: Unloading "module-stream-restore" (index: #1).
( 514.231| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 removed from object /org/pulseaudio/stream_restore1
( 514.231| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry removed from object /org/pulseaudio/stream_restore1/entry0
( 514.231| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry removed from object /org/pulseaudio/stream_restore1/entry1
( 514.231| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry removed from object /org/pulseaudio/stream_restore1/entry2
( 514.231| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry removed from object /org/pulseaudio/stream_restore1/entry3
( 514.231| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry removed from object /org/pulseaudio/stream_restore1/entry4
( 514.231| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry removed from object /org/pulseaudio/stream_restore1/entry5
( 514.231| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry removed from object /org/pulseaudio/stream_restore1/entry6
( 514.232| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry removed from object /org/pulseaudio/stream_restore1/entry7
( 514.232| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry removed from object /org/pulseaudio/stream_restore1/entry8
( 514.232| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry removed from object /org/pulseaudio/stream_restore1/entry9
( 514.232| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry removed from object /org/pulseaudio/stream_restore1/entry10
( 514.232| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry removed from object /org/pulseaudio/stream_restore1/entry11
( 514.232| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry removed from object /org/pulseaudio/stream_restore1/entry12
( 514.232| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry removed from object /org/pulseaudio/stream_restore1/entry13
( 514.232| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry removed from object /org/pulseaudio/stream_restore1/entry14
( 514.232| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry removed from object /org/pulseaudio/stream_restore1/entry15
( 514.232| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry removed from object /org/pulseaudio/stream_restore1/entry16
( 514.232| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry removed from object /org/pulseaudio/stream_restore1/entry17
( 514.232| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry removed from object /org/pulseaudio/stream_restore1/entry18
( 514.233| 0.000) D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry removed from object /org/pulseaudio/stream_restore1/entry19
( 514.233| 0.000) I: [pulseaudio] module.c: Unloaded "module-stream-restore" (index: #1).
( 514.233| 0.000) I: [pulseaudio] module.c: Unloading "module-device-restore" (index: #0).
( 514.233| 0.000) I: [pulseaudio] module.c: Unloaded "module-device-restore" (index: #0).
( 514.233| 0.000) I: [pulseaudio] main.c: Daemon terminated.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.alioth.debian.org/pipermail/pkg-pulseaudio-devel/attachments/20141126/abbbae6a/attachment-0001.sig>
More information about the pkg-pulseaudio-devel
mailing list