Bug#776768: module-tunnel-sink: nothing plays back properly/playback stops/media player issues

Steven Presser debian-bugs at pressers.name
Sun Feb 1 14:19:47 UTC 2015


Package: pulseaudio
Version: 5.0-13
Severity: important

Dear Maintainer,

I set up my home network to stream music to multiple rooms.  Upon starting to play music I noted that it would randomly (within 5 songs/~30minutes) stop playing.  In banshee the UI would be showing that the song immediately previous to the one it halted in was playing.  Additionally, both banshee & rhytmbox did not move the sliders indicating where in the song the playback was.  Other methods of playing music also exhibit problematic behavior.  Google play's online player does't move the trackbar, stutters, then skips to the next song.  Youtube shows the same trackbar not moving and does not display video, although sound plays.  It would appear this is present no matter the audio source.

I unfortunately have little to go on for this bug.  I have no experience debugging pulse and this behavior is too weird for me to even guess where to start.  My debugging consted of isolating the problem to tunneling sound.  In other words, after I observed the problem, I went back to using just my local speakers.  All problematic behavior disappeared.

pacmd dump:
### Configuration dump generated at Fri Jan 30 13:53:55 2015

load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
load-module module-augment-properties
load-module module-switch-on-port-available
load-module module-udev-detect
load-module module-alsa-card device_id="0" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"
load-module module-bluetooth-policy
load-module module-bluetooth-discover
load-module module-bluez5-discover
load-module module-bluez4-discover
load-module module-native-protocol-unix
load-module module-tunnel-sink server=mordor.pressers.name
load-module module-combine-sink sink_name=all-apartment slaves=tunnel-sink.mordor.pressers.name,alsa_output.pci-0000_00_1b.0.analog-stereo 
load-module module-default-device-restore
load-module module-rescue-streams
load-module module-always-sink
load-module module-intended-roles
load-module module-suspend-on-idle
load-module module-console-kit
load-module module-systemd-login
load-module module-position-event-sounds
load-module module-role-cork
load-module module-filter-heuristics
load-module module-filter-apply
load-module module-cli-protocol-unix
load-module module-bluez5-device path=/org/bluez/hci0/dev_88_C9_D0_84_87_DF
load-module module-loopback source="bluez_source.88_C9_D0_84_87_DF" source_dont_move="true" sink_input_properties="media.role=music"

set-sink-volume alsa_output.pci-0000_00_1b.0.analog-stereo 0x947c
set-sink-mute alsa_output.pci-0000_00_1b.0.analog-stereo no
suspend-sink alsa_output.pci-0000_00_1b.0.analog-stereo yes
set-sink-volume tunnel-sink.mordor.pressers.name 0xd1ec
set-sink-mute tunnel-sink.mordor.pressers.name no
suspend-sink tunnel-sink.mordor.pressers.name no
set-sink-volume all-apartment 0xee00
set-sink-mute all-apartment no
suspend-sink all-apartment yes

set-source-volume alsa_output.pci-0000_00_1b.0.analog-stereo.monitor 0x10000
set-source-mute alsa_output.pci-0000_00_1b.0.analog-stereo.monitor no
suspend-source alsa_output.pci-0000_00_1b.0.analog-stereo.monitor yes
set-source-volume alsa_input.pci-0000_00_1b.0.analog-stereo 0x2afb
set-source-mute alsa_input.pci-0000_00_1b.0.analog-stereo no
suspend-source alsa_input.pci-0000_00_1b.0.analog-stereo no
set-source-volume tunnel-sink.mordor.pressers.name.monitor 0x10000
set-source-mute tunnel-sink.mordor.pressers.name.monitor no
suspend-source tunnel-sink.mordor.pressers.name.monitor no
set-source-volume all-apartment.monitor 0x10000
set-source-mute all-apartment.monitor no
suspend-source all-apartment.monitor yes
set-source-volume bluez_source.88_C9_D0_84_87_DF 0x10000
set-source-mute bluez_source.88_C9_D0_84_87_DF no
suspend-source bluez_source.88_C9_D0_84_87_DF yes

set-card-profile alsa_card.pci-0000_00_1b.0 output:analog-stereo+input:analog-stereo
set-card-profile bluez_card.88_C9_D0_84_87_DF a2dp_source

set-default-sink tunnel-sink.mordor.pressers.name
set-default-source alsa_input.pci-0000_00_1b.0.analog-stereo

### EOF

>>> list-sinks
3 sink(s) available.
    index: 0
	name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 9959
	volume: front-left: 38012 /  58% / -14.19 dB,   front-right: 38012 /  58% / -14.19 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 0
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 371.52 ms
	card: 0 <alsa_card.pci-0000_00_1b.0>
	module: 6
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC269VC Analog"
		alsa.id = "ALC269VC Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xf3a30000 irq 49"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "1e20"
		device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller"
		device.form_factor = "internal"
		device.string = "front:0"
		device.buffering.buffer_size = "65536"
		device.buffering.fragment_size = "32768"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Built-in Audio Analog Stereo"
		alsa.mixer_name = "Realtek ALC269VC"
		alsa.components = "HDA:10ec0269,17aa21f6,00100203"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown)
			properties:
				
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-speakers"
		analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
	active port: <analog-output-speaker>
  * index: 1
	name: <tunnel-sink.mordor.pressers.name>
	driver: <module-tunnel.c>
	flags: NETWORK HW_MUTE_CTRL HW_VOLUME_CTRL LATENCY 
	state: RUNNING
	suspend cause: 
	priority: 0
	volume: front-left: 53740 /  82%,   front-right: 53740 /  82%
	        balance 0.00
	base volume: 65536 / 100%
	volume steps: 65537
	muted: no
	current latency: 7457098.54 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 2
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 1
	linked by: 2
	fixed latency: 250.00 ms
	module: 12
	properties:
		device.description = "Built-in Audio Analog Stereo on pulse at mordor"
		tunnel.remote.server = "mordor.pressers.name"
		device.icon_name = "audio-card"
		tunnel.remote_version = "29"
		tunnel.remote.user = "pulse"
		tunnel.remote.fqdn = "mordor"
		tunnel.remote.description = "Built-in Audio Analog Stereo"
    index: 2
	name: <all-apartment>
	driver: <module-combine-sink.c>
	flags: DECIBEL_VOLUME LATENCY FLAT_VOLUME 
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 1000
	volume: front-left: 60928 /  93% / -1.90 dB,   front-right: 60928 /  93% / -1.90 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max request: 34 KiB
	max rewind: 0 KiB
	monitor source: 3
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	fixed latency: 200.00 ms
	module: 13
	properties:
		device.class = "filter"
		combine.slaves = "tunnel-sink.mordor.pressers.name,alsa_output.pci-0000_00_1b.0.analog-stereo"
		device.description = "Simultaneous output to mordor.pressers.name, Built-in Audio Analog Stereo"
		device.icon_name = "audio-card"


As a final note, mordor (referenced in the configuration file) is a gentoo server running pulseaudio 5.0-r4 (stable).  As this is a sessionless server, it is running as a systemwide daemon.

mordor ~ # equery u pulseaudio
[ Legend : U - final flag setting for installation]
[        : I - package is installed with flag     ]
[ Colors : set, unset                             ]
 * Found these USE flags for media-sound/pulseaudio-5.0-r4:
 U I
 + + X             : Build the X11 publish module to export PulseAudio
                     information through X11 protocol for clients to make use.
                     Don't enable this flag if you want to use a system wide
                     instance. If unsure, enable this flag. 
 + + alsa          : Add support for media-libs/alsa-lib (Advanced Linux Sound
                     Architecture)
 + + asyncns       : Use libasyncns for asynchronous name resolution.
 - - avahi         : Add avahi/Zeroconf support
 - - bluetooth     : Enable Bluetooth Support
 + + caps          : Use Linux capabilities library to control privilege
 + + dbus          : Enable dbus support for anything that needs it (gpsd,
                     gnomemeeting, etc)
 - - doc           : Build the doxygen-described API documentation.
 - - equalizer     : Enable the equalizer module (requires sci-libs/fftw). 
 + + gdbm          : Use sys-libs/gdbm to store PulseAudio databases.
                     Recommended for desktop usage. This flag causes the whole
                     package to be licensed under GPL-2 or later. 
 + + glib          : Add support to dev-libs/glib-based mainloop for the
                     libpulse client library, to allow using libpulse on
                     glib-based programs. 
 - - gnome         : Use GConf to store user preferences on streams and so on.
                     Don't enable this flag if you want to use a system wide
                     instance. If unsure, enable this flag. 
 - - gtk           : Add support for x11-libs/gtk+ (The GIMP Toolkit)
 + + ipv6          : Add support for IP version 6
 - - jack          : Add support for the JACK Audio Connection Kit
 - - libsamplerate : Build with support for converting sample rates using
                     libsamplerate
 - - lirc          : Add support for lirc (Linux's Infra-Red Remote Control)
 + + orc           : Use dev-lang/orc for just-in-time optimization of array
                     operations
 - - qt4           : Add support for the Qt GUI/Application Toolkit version 4.x
 - - realtime      : (Restricted to >=media-sound/pulseaudio-0.9.21.2-r1)
                     Makes PulseAudio use RealtimeKit (sys-auth/rtkit) to get
                     real-time priority while running. 
 + + ssl           : Use dev-libs/openssl to provide support for RAOP (AirPort)
                     streaming. 
 + + system-wide   : (Restricted to >=media-sound/pulseaudio-0.9.21.1)
                     Allow preparation and installation of the system-wide init
                     script for PulseAudio. Since this support is only
                     supported for embedded situations, do not enable without
                     reading the upstream instructions at
                     http://pulseaudio.org/wiki/WhatIsWrongWithSystemMode . 
 - - systemd       : Build with sys-apps/systemd support to replace standalone
                     ConsoleKit. 
 + + tcpd          : Add support for TCP wrappers
 - - test          : Workaround to pull in packages needed to run with
                     FEATURES=test. Portage-2.1.2 handles this internally, so
                     don't set it in make.conf/package.use anymore
 + + udev          : Enable virtual/udev integration (device discovery, power
                     and storage device support, etc)
 + + webrtc-aec    : Uses the webrtc.org AudioProcessing library for enhancing
                     VoIP calls greatly in applications that support it by
                     performing acoustic echo cancellation, analog gain
                     control, noise suppression and other processing. 
 - - xen           : Builds a special paravirtualized module for running in a
                     Xen guest.


-- Package-specific info:
File '/etc/default/pulseaudio' does not exist


-- System Information:
Debian Release: 8.0
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'testing'), (500, 'stable'), (350, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.16.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages pulseaudio depends on:
ii  adduser                       3.113+nmu3
ii  libasound2                    1.0.28-1
ii  libasound2-plugins            1.0.28-1+b1
ii  libc6                         2.19-13
ii  libcap2                       1:2.24-6
ii  libdbus-1-3                   1.8.12-3
ii  libfftw3-single3              3.3.4-2
ii  libgcc1                       1:4.9.1-19
ii  libice6                       2:1.0.9-1+b1
ii  libltdl7                      2.4.2-1.11
ii  liborc-0.4-0                  1:0.4.22-1
ii  libpulse0                     5.0-13
ii  libsamplerate0                0.1.8-8
ii  libsm6                        2:1.2.2-1+b1
ii  libsndfile1                   1.0.25-9+b1
ii  libspeexdsp1                  1.2~rc1.2-1
ii  libstdc++6                    4.9.1-19
ii  libsystemd0                   215-10
ii  libtdb1                       1.3.1-1
ii  libudev1                      215-10
ii  libwebrtc-audio-processing-0  0.1-3
ii  libx11-6                      2:1.6.2-3
ii  libx11-xcb1                   2:1.6.2-3
ii  libxcb1                       1.10-3+b1
ii  libxtst6                      2:1.2.2-1+b1
ii  lsb-base                      4.1+Debian13+nmu1
ii  pulseaudio-utils              5.0-13
ii  udev                          215-10

Versions of packages pulseaudio recommends:
ii  pulseaudio-module-x11  5.0-13
ii  rtkit                  0.11-2

Versions of packages pulseaudio suggests:
pn  paman        <none>
pn  paprefs      <none>
pn  pavucontrol  <none>
pn  pavumeter    <none>

-- Configuration Files:
/etc/pulse/default.pa changed:
..nofail
..fail
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
load-module module-augment-properties
load-module module-switch-on-port-available
..ifexists module-udev-detect.so
load-module module-udev-detect
..else
load-module module-detect
..endif
..ifexists module-jackdbus-detect.so
..nofail
load-module module-jackdbus-detect channels=2
..fail
..endif
..ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
..endif
..ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
..endif
..ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
..endif
load-module module-native-protocol-unix
..ifexists module-gconf.so
..nofail
load-module module-gconf
..fail
..endif
load-module module-tunnel-sink server=mordor.pressers.name
load-module module-combine-sink sink_name=all-apartment slaves=tunnel-sink.mordor.pressers.name,alsa_output.pci-0000_00_1b.0.analog-stereo 
load-module module-default-device-restore
load-module module-rescue-streams
load-module module-always-sink
load-module module-intended-roles
load-module module-suspend-on-idle
..ifexists module-console-kit.so
load-module module-console-kit
..endif
..ifexists module-systemd-login.so
load-module module-systemd-login
..endif
load-module module-position-event-sounds
load-module module-role-cork
load-module module-filter-heuristics
load-module module-filter-apply


-- no debconf information
-------------- next part --------------
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
# USA.

## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
## more information. Default values are commented out.  Use either ; or # for
## commenting.

; default-sink =
; default-source =
; default-server =
; default-dbus-server =

; autospawn = yes
; daemon-binary = /usr/bin/pulseaudio
; extra-arguments = --log-target=syslog

; cookie-file =

; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB

; auto-connect-localhost = no
; auto-connect-display = no
-------------- next part --------------
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
# USA.

## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out.  Use either ; or # for
## commenting.

; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; lock-memory = no
; cpu-limit = no

; high-priority = yes
; nice-level = -11

; realtime-scheduling = yes
; realtime-priority = 5

; exit-idle-time = 20
; scache-idle-time = 20

; dl-search-path = (depends on architecture)

; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa

; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0

# resample-method defaults to  speex-float-1 on most architectures,
# speex-fixed-1 on ARM
; resample-method = speex-float-1
; enable-remixing = yes
; enable-lfe-remixing = no

; flat-volumes = yes

; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 1000000

; default-sample-format = s16le
; default-sample-rate = 44100
; alternate-sample-rate = 48000
; default-sample-channels = 2
; default-channel-map = front-left,front-right

; default-fragments = 4
; default-fragment-size-msec = 25

; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0
-------------- next part --------------
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)

..nofail

### Load something into the sample cache
#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
#load-sample-lazy pulse-access /usr/share/sounds/generic.wav

..fail

### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore

### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties

### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available

### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink

### Automatically load driver modules depending on the hardware available
..ifexists module-udev-detect.so
load-module module-udev-detect
..else
### Use the static hardware detection module (for systems that lack udev support)
load-module module-detect
..endif

### Automatically connect sink and source if JACK server is present
..ifexists module-jackdbus-detect.so
..nofail
load-module module-jackdbus-detect channels=2
..fail
..endif

### Automatically load driver modules for Bluetooth hardware
..ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
..endif

..ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
..endif

### Load several protocols
..ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
..endif
load-module module-native-protocol-unix

### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish

### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv

### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor

### Load additional modules from GConf settings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
..ifexists module-gconf.so
..nofail
load-module module-gconf
..fail
..endif

### Add remote sink (mordor)
load-module module-tunnel-sink server=mordor.pressers.name

### Create combined mordor/local headphones sink
load-module module-combine-sink sink_name=all-apartment slaves=tunnel-sink.mordor.pressers.name,alsa_output.pci-0000_00_1b.0.analog-stereo 

### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore

### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams

### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink

### Honour intended role device property
load-module module-intended-roles

### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle

### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
..ifexists module-console-kit.so
load-module module-console-kit
..endif
..ifexists module-systemd-login.so
load-module module-systemd-login
..endif

### Enable positioned event sounds
load-module module-position-event-sounds

### Cork music/video streams when a phone stream is active
load-module module-role-cork

### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply

# X11 modules should not be started from default.pa so that one daemon
# can be shared by multiple sessions.

### Load X11 bell module
#load-module module-x11-bell sample=bell-windowing-system

### Register ourselves in the X11 session manager
#load-module module-x11-xsmp

### Publish connection data in the X11 root window
#.ifexists module-x11-publish.so
#.nofail
#load-module module-x11-publish
#.fail
#.endif

### Make some devices default
#set-default-sink output
#set-default-source input

-------------- next part --------------
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

# This startup script is used only if PulseAudio is started in system
# mode.

### Automatically load driver modules depending on the hardware available
..ifexists module-udev-detect.so
load-module module-udev-detect
..else
### Use the static hardware detection module (for systems that lack udev/hal support)
load-module module-detect
..endif

### Load several protocols
..ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
..endif
load-module module-native-protocol-unix

### Automatically restore the volume of streams and devices
load-module module-stream-restore
load-module module-device-restore

### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore

### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams

### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink

### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle

### Enable positioned event sounds
load-module module-position-event-sounds
-------------- next part --------------
default
    Playback/recording through the PulseAudio sound server
null
    Discard all samples (playback) or generate zero samples (capture)
pulse
    PulseAudio Sound Server
sysdefault:CARD=PCH
    HDA Intel PCH, ALC269VC Analog
    Default Audio Device
front:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    Front speakers
surround21:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
dmix:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    Direct sample mixing device
dsnoop:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    Direct sample snooping device
hw:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    Direct hardware device without any conversions
plughw:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    Hardware device with all software conversions
-------------- next part --------------
Card #0
	Name: alsa_card.pci-0000_00_1b.0
	Driver: module-alsa-card.c
	Owner Module: 6
	Properties:
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xf3a30000 irq 49"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "1e20"
		device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller"
		device.form_factor = "internal"
		device.string = "0"
		device.description = "Built-in Audio"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Profiles:
		input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 60, available: yes)
		output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6000, available: yes)
		output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6060, available: yes)
		output:analog-surround-40: Analog Surround 4.0 Output (sinks: 1, sources: 0, priority: 700, available: yes)
		output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 760, available: yes)
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
	Active Profile: output:analog-stereo+input:analog-stereo
	Ports:
		analog-input-internal-mic: Internal Microphone (priority: 8900, latency offset: 0 usec)
			Properties:
				device.icon_name = "audio-input-microphone"
			Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-40+input:analog-stereo
		analog-input-dock-mic: Dock Microphone (priority: 7800, latency offset: 0 usec, not available)
			Properties:
				device.icon_name = "audio-input-microphone"
			Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-40+input:analog-stereo
		analog-input-mic: Microphone (priority: 8700, latency offset: 0 usec, not available)
			Properties:
				device.icon_name = "audio-input-microphone"
			Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-40+input:analog-stereo
		analog-output: Analog Output (priority: 9900, latency offset: 0 usec)
			Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+input:analog-stereo
		analog-output-speaker: Speakers (priority: 10000, latency offset: 0 usec, not available)
			Properties:
				device.icon_name = "audio-speakers"
			Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+input:analog-stereo
		analog-output-headphones: Headphones (priority: 9000, latency offset: 0 usec, available)
			Properties:
				device.icon_name = "audio-headphones"
			Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo

Card #87
	Name: bluez_card.88_C9_D0_84_87_DF
	Driver: module-bluez5-device.c
	Owner Module: 198
	Properties:
		device.description = "paperwing"
		device.string = "88:C9:D0:84:87:DF"
		device.api = "bluez"
		device.class = "sound"
		device.bus = "bluetooth"
		device.form_factor = "phone"
		bluez.path = "/org/bluez/hci0/dev_88_C9_D0_84_87_DF"
		bluez.class = "0x5a020c"
		bluez.alias = "paperwing"
		device.icon_name = "audio-card-bluetooth"
	Profiles:
		a2dp_source: High Fidelity Capture (A2DP Source) (sinks: 0, sources: 1, priority: 10, available: yes)
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
	Active Profile: a2dp_source
	Ports:
		phone-output: Phone (priority: 0, latency offset: 0 usec, not available)
		phone-input: Phone (priority: 0, latency offset: 0 usec)
			Part of profile(s): a2dp_source
-------------- next part --------------
Sink #0
	State: SUSPENDED
	Name: alsa_output.pci-0000_00_1b.0.analog-stereo
	Description: Built-in Audio Analog Stereo
	Driver: module-alsa-card.c
	Sample Specification: s16le 2ch 44100Hz
	Channel Map: front-left,front-right
	Owner Module: 6
	Mute: no
	Volume: front-left: 37930 /  58% / -14.25 dB,   front-right: 37930 /  58% / -14.25 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor Source: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC269VC Analog"
		alsa.id = "ALC269VC Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xf3a30000 irq 49"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "1e20"
		device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller"
		device.form_factor = "internal"
		device.string = "front:0"
		device.buffering.buffer_size = "65536"
		device.buffering.fragment_size = "32768"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Built-in Audio Analog Stereo"
		alsa.mixer_name = "Realtek ALC269VC"
		alsa.components = "HDA:10ec0269,17aa21f6,00100203"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Ports:
		analog-output: Analog Output (priority: 9900)
		analog-output-speaker: Speakers (priority: 10000, not available)
		analog-output-headphones: Headphones (priority: 9000, available)
	Active Port: analog-output-headphones
	Formats:
		pcm

Sink #2
	State: SUSPENDED
	Name: all-apartment
	Description: Simultaneous output to Built-in Audio Analog Stereo
	Driver: module-combine-sink.c
	Sample Specification: s16le 2ch 44100Hz
	Channel Map: front-left,front-right
	Owner Module: 13
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor Source: all-apartment.monitor
	Latency: 0 usec, configured 0 usec
	Flags: DECIBEL_VOLUME LATENCY 
	Properties:
		device.class = "filter"
		combine.slaves = "tunnel-sink.mordor.pressers.name,alsa_output.pci-0000_00_1b.0.analog-stereo"
		device.description = "Simultaneous output to Built-in Audio Analog Stereo"
		device.icon_name = "audio-card"
	Formats:
		pcm
-------------- next part --------------
Source #0
	State: SUSPENDED
	Name: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
	Description: Monitor of Built-in Audio Analog Stereo
	Driver: module-alsa-card.c
	Sample Specification: s16le 2ch 44100Hz
	Channel Map: front-left,front-right
	Owner Module: 6
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: alsa_output.pci-0000_00_1b.0.analog-stereo
	Latency: 0 usec, configured 0 usec
	Flags: DECIBEL_VOLUME LATENCY 
	Properties:
		device.description = "Monitor of Built-in Audio Analog Stereo"
		device.class = "monitor"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xf3a30000 irq 49"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "1e20"
		device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller"
		device.form_factor = "internal"
		device.string = "0"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Formats:
		pcm

Source #1
	State: RUNNING
	Name: alsa_input.pci-0000_00_1b.0.analog-stereo
	Description: Built-in Audio Analog Stereo
	Driver: module-alsa-card.c
	Sample Specification: s16le 2ch 44100Hz
	Channel Map: front-left,front-right
	Owner Module: 6
	Mute: no
	Volume: front-left: 11003 /  17% / -46.50 dB,   front-right: 11003 /  17% / -46.50 dB
	        balance 0.00
	Base Volume: 6554 /  10% / -60.00 dB
	Monitor of Sink: n/a
	Latency: 3729 usec, configured 86000 usec
	Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC269VC Analog"
		alsa.id = "ALC269VC Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xf3a30000 irq 49"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "1e20"
		device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller"
		device.form_factor = "internal"
		device.string = "front:0"
		device.buffering.buffer_size = "65536"
		device.buffering.fragment_size = "32768"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Built-in Audio Analog Stereo"
		alsa.mixer_name = "Realtek ALC269VC"
		alsa.components = "HDA:10ec0269,17aa21f6,00100203"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Ports:
		analog-input-internal-mic: Internal Microphone (priority: 8900)
		analog-input-dock-mic: Dock Microphone (priority: 7800, not available)
		analog-input-mic: Microphone (priority: 8700, not available)
	Active Port: analog-input-internal-mic
	Formats:
		pcm

Source #3
	State: SUSPENDED
	Name: all-apartment.monitor
	Description: Monitor Source of Simultaneous output to Built-in Audio Analog Stereo
	Driver: module-combine-sink.c
	Sample Specification: s16le 2ch 44100Hz
	Channel Map: front-left,front-right
	Owner Module: 13
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: all-apartment
	Latency: 0 usec, configured 0 usec
	Flags: DECIBEL_VOLUME LATENCY 
	Properties:
		device.description = "Monitor Source of Simultaneous output to Built-in Audio Analog Stereo"
		device.class = "monitor"
		device.icon_name = "audio-input-microphone"
	Formats:
		pcm

Source #90
	State: SUSPENDED
	Name: bluez_source.88_C9_D0_84_87_DF
	Description: paperwing
	Driver: module-bluez5-device.c
	Sample Specification: s16le 2ch 44100Hz
	Channel Map: front-left,front-right
	Owner Module: 198
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: n/a
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY 
	Properties:
		bluetooth.protocol = "a2dp_source"
		device.description = "paperwing"
		device.string = "88:C9:D0:84:87:DF"
		device.api = "bluez"
		device.class = "sound"
		device.bus = "bluetooth"
		device.form_factor = "phone"
		bluez.path = "/org/bluez/hci0/dev_88_C9_D0_84_87_DF"
		bluez.class = "0x5a020c"
		bluez.alias = "paperwing"
		device.icon_name = "audio-card-bluetooth"
	Ports:
		phone-input: Phone (priority: 0)
	Active Port: phone-input
	Formats:
		pcm
-------------- next part --------------
Module #0
	Name: module-device-restore
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the volume/mute state of devices"
		module.version = "5.0"

Module #1
	Name: module-stream-restore
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the volume/mute/device state of streams"
		module.version = "5.0"

Module #2
	Name: module-card-restore
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore profile of cards"
		module.version = "5.0"

Module #3
	Name: module-augment-properties
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Augment the property sets of streams with additional static information"
		module.version = "5.0"

Module #4
	Name: module-switch-on-port-available
	Argument: 
	Usage counter: n/a
	Properties:
		

Module #5
	Name: module-udev-detect
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Detect available audio hardware and load matching drivers"
		module.version = "5.0"

Module #6
	Name: module-alsa-card
	Argument: device_id="0" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"
	Usage counter: 2
	Properties:
		module.author = "Lennart Poettering"
		module.description = "ALSA Card"
		module.version = "5.0"

Module #7
	Name: module-bluetooth-policy
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Fr?d?ric Dalleau"
		module.description = "When a bluetooth sink or source is added, load module-loopback"
		module.version = "5.0"

Module #8
	Name: module-bluetooth-discover
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Jo?o Paulo Rechi Vita"
		module.description = "Detect available Bluetooth daemon and load the corresponding discovery module"
		module.version = "5.0"

Module #9
	Name: module-bluez5-discover
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Jo?o Paulo Rechi Vita"
		module.description = "Detect available BlueZ 5 Bluetooth audio devices and load BlueZ 5 Bluetooth audio drivers"
		module.version = "5.0"

Module #10
	Name: module-bluez4-discover
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Jo?o Paulo Rechi Vita"
		module.description = "Detect available BlueZ 4 Bluetooth audio devices and load BlueZ 4 Bluetooth audio drivers"
		module.version = "5.0"

Module #11
	Name: module-native-protocol-unix
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Native protocol (UNIX sockets)"
		module.version = "5.0"

Module #13
	Name: module-combine-sink
	Argument: sink_name=all-apartment slaves=tunnel-sink.mordor.pressers.name,alsa_output.pci-0000_00_1b.0.analog-stereo 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Combine multiple sinks to one"
		module.version = "5.0"

Module #14
	Name: module-default-device-restore
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the default sink and source"
		module.version = "5.0"

Module #15
	Name: module-rescue-streams
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "When a sink/source is removed, try to move its streams to the default sink/source"
		module.version = "5.0"

Module #16
	Name: module-always-sink
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Colin Guthrie"
		module.description = "Always keeps at least one sink loaded even if it's a null one"
		module.version = "5.0"

Module #17
	Name: module-intended-roles
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically set device of streams based on intended roles of devices"
		module.version = "5.0"

Module #18
	Name: module-suspend-on-idle
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "When a sink/source is idle for too long, suspend it"
		module.version = "5.0"

Module #19
	Name: module-console-kit
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Create a client for each ConsoleKit session of this user"
		module.version = "5.0"

Module #20
	Name: module-systemd-login
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Create a client for each login session of this user"
		module.version = "5.0"

Module #21
	Name: module-position-event-sounds
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
		module.version = "5.0"

Module #22
	Name: module-role-cork
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Mute & cork streams with certain roles while others exist"
		module.version = "5.0"

Module #23
	Name: module-filter-heuristics
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Colin Guthrie"
		module.description = "Detect when various filters are desirable"
		module.version = "5.0"

Module #24
	Name: module-filter-apply
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Colin Guthrie"
		module.description = "Load filter sinks automatically when needed"
		module.version = "5.0"

Module #27
	Name: module-cli-protocol-unix
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Command line interface protocol (UNIX sockets)"
		module.version = "5.0"

Module #198
	Name: module-bluez5-device
	Argument: path=/org/bluez/hci0/dev_88_C9_D0_84_87_DF
	Usage counter: 1
	Properties:
		module.author = "Jo?o Paulo Rechi Vita"
		module.description = "BlueZ 5 Bluetooth audio sink and source"
		module.version = "5.0"

Module #199
	Name: module-loopback
	Argument: source="bluez_source.88_C9_D0_84_87_DF" source_dont_move="true" sink_input_properties="media.role=music"
	Usage counter: n/a
	Properties:
		module.author = "Pierre-Louis Bossart"
		module.description = "Loopback from source to sink"
		module.version = "5.0"
-------------- next part --------------
Server String: unix:/run/user/1000/pulse/native
Library Protocol Version: 29
Server Protocol Version: 29
Is Local: yes
Client Index: 75
Tile Size: 65472
User Name: steve
Host Name: mogget
Server Name: pulseaudio
Server Version: 5.0
Default Sample Specification: s16le 2ch 44100Hz
Default Channel Map: front-left,front-right
Default Sink: alsa_output.pci-0000_00_1b.0.analog-stereo
Default Source: alsa_input.pci-0000_00_1b.0.analog-stereo
Cookie: 89f9:ea4d


More information about the pkg-pulseaudio-devel mailing list