Bug#776632: pulseaudio: fails to add bluetooth speakers as audio output device
Stefan Nagy
public at stefan-nagy.at
Fri Jan 30 10:33:59 UTC 2015
Package: pulseaudio
Version: 5.0-13
Severity: normal
Dear Maintainer,
After pairing the 'Creative T30 Wireless' bluetooth speakers with my notebook I
never had any problems connecting them, but in most cases they won't appear in
GNOME audio settings (or pavucontrol) as audio output device.
Over the last months I used to disconnect them, switch bluetooth off and on
again and then connect the speakers again – after some attempts the speakers
appeared in GNOME audio settings and I was able to use them. Yesterday I
realized that it seems to work immediately if I restart bluetoothd before I try
to connect the speakers.
I'll attach three log files:
- dmesg output
At the end you can see that I connected my speakers three times
(00:02:3C:49:93:08) until I was able to use them
- pulseaudio-log1
Here I started pulseaudio, entered GNOME bluetooth settings, connected to my
bluetooth speakers and then entered GNOME audio settings. In this case the
speakers were not added as audio output device.
- pulseaudio-log2
Here I started pulseaudio, entered GNOME bluetooth settings, connected to my
bluetooth speakers and then entered GNOME audio settings. This time the
speakers were addded as audio output device.
Please tell me if I can provide any more useful information.
-- Package-specific info:
File '/etc/default/pulseaudio' does not exist
-- System Information:
Debian Release: 8.0
APT prefers testing
APT policy: (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.18.0-trunk-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_AT.utf8, LC_CTYPE=de_AT.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages pulseaudio depends on:
ii adduser 3.113+nmu3
ii libasound2 1.0.28-1
ii libasound2-plugins 1.0.28-1+b1
ii libc6 2.19-13
ii libcap2 1:2.24-6
ii libdbus-1-3 1.8.12-3
ii libfftw3-single3 3.3.4-2
ii libgcc1 1:4.9.1-19
ii libice6 2:1.0.9-1+b1
ii libltdl7 2.4.2-1.11
ii liborc-0.4-0 1:0.4.22-1
ii libpulse0 5.0-13
ii libsamplerate0 0.1.8-8
ii libsm6 2:1.2.2-1+b1
ii libsndfile1 1.0.25-9+b1
ii libspeexdsp1 1.2~rc1.2-1
ii libstdc++6 4.9.1-19
ii libsystemd0 215-10
ii libtdb1 1.3.1-1
ii libudev1 215-10
ii libwebrtc-audio-processing-0 0.1-3
ii libx11-6 2:1.6.2-3
ii libx11-xcb1 2:1.6.2-3
ii libxcb1 1.10-3+b1
ii libxtst6 2:1.2.2-1+b1
ii lsb-base 4.1+Debian13+nmu1
ii pulseaudio-utils 5.0-13
ii udev 215-10
Versions of packages pulseaudio recommends:
ii pulseaudio-module-x11 5.0-13
ii rtkit 0.11-2
Versions of packages pulseaudio suggests:
pn paman <none>
ii paprefs 0.9.10-1
ii pavucontrol 2.0-3
pn pavumeter <none>
-- Configuration Files:
/etc/pulse/daemon.conf changed [not included]
-- no debconf information
-------------- next part --------------
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
# USA.
## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; default-sink =
; default-source =
; default-server =
; default-dbus-server =
; autospawn = yes
; daemon-binary = /usr/bin/pulseaudio
; extra-arguments = --log-target=syslog
; cookie-file =
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; auto-connect-localhost = no
; auto-connect-display = no
-------------- next part --------------
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
# USA.
## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; lock-memory = no
; cpu-limit = no
; high-priority = yes
; nice-level = -11
; realtime-scheduling = yes
; realtime-priority = 5
; exit-idle-time = 20
; scache-idle-time = 20
; dl-search-path = (depends on architecture)
; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa
; log-target = syslog
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0
# resample-method defaults to speex-float-1 on most architectures,
# speex-fixed-1 on ARM
; resample-method = speex-float-1
; enable-remixing = yes
; enable-lfe-remixing = no
; flat-volumes = yes
; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 1000000
; default-sample-format = s16le
; default-sample-rate = 44100
; alternate-sample-rate = 48000
; default-sample-channels = 2
; default-channel-map = front-left,front-right
; default-fragments = 4
; default-fragment-size-msec = 25
; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0
-------------- next part --------------
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)
..nofail
### Load something into the sample cache
#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
..fail
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink
### Automatically load driver modules depending on the hardware available
..ifexists module-udev-detect.so
load-module module-udev-detect
..else
### Use the static hardware detection module (for systems that lack udev support)
load-module module-detect
..endif
### Automatically connect sink and source if JACK server is present
..ifexists module-jackdbus-detect.so
..nofail
load-module module-jackdbus-detect channels=2
..fail
..endif
### Automatically load driver modules for Bluetooth hardware
..ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
..endif
..ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
..endif
### Load several protocols
..ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
..endif
load-module module-native-protocol-unix
### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish
### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv
### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor
### Load additional modules from GConf settings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
..ifexists module-gconf.so
..nofail
load-module module-gconf
..fail
..endif
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Honour intended role device property
load-module module-intended-roles
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
..ifexists module-console-kit.so
load-module module-console-kit
..endif
..ifexists module-systemd-login.so
load-module module-systemd-login
..endif
### Enable positioned event sounds
load-module module-position-event-sounds
### Cork music/video streams when a phone stream is active
load-module module-role-cork
### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply
# X11 modules should not be started from default.pa so that one daemon
# can be shared by multiple sessions.
### Load X11 bell module
#load-module module-x11-bell sample=bell-windowing-system
### Register ourselves in the X11 session manager
#load-module module-x11-xsmp
### Publish connection data in the X11 root window
#.ifexists module-x11-publish.so
#.nofail
#load-module module-x11-publish
#.fail
#.endif
### Make some devices default
#set-default-sink output
#set-default-source input
-------------- next part --------------
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
# This startup script is used only if PulseAudio is started in system
# mode.
### Automatically load driver modules depending on the hardware available
..ifexists module-udev-detect.so
load-module module-udev-detect
..else
### Use the static hardware detection module (for systems that lack udev/hal support)
load-module module-detect
..endif
### Load several protocols
..ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
..endif
load-module module-native-protocol-unix
### Automatically restore the volume of streams and devices
load-module module-stream-restore
load-module module-device-restore
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### Enable positioned event sounds
load-module module-position-event-sounds
-------------- next part --------------
default
Playback/recording through the PulseAudio sound server
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
sysdefault:CARD=PCH
HDA Intel PCH, 92HD99BXX Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, 92HD99BXX Analog
Front speakers
surround21:CARD=PCH,DEV=0
HDA Intel PCH, 92HD99BXX Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, 92HD99BXX Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, 92HD99BXX Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, 92HD99BXX Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, 92HD99BXX Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, 92HD99BXX Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=PCH,DEV=0
HDA Intel PCH, HDMI 0
HDMI Audio Output
dmix:CARD=PCH,DEV=0
HDA Intel PCH, 92HD99BXX Analog
Direct sample mixing device
dmix:CARD=PCH,DEV=3
HDA Intel PCH, HDMI 0
Direct sample mixing device
dsnoop:CARD=PCH,DEV=0
HDA Intel PCH, 92HD99BXX Analog
Direct sample snooping device
dsnoop:CARD=PCH,DEV=3
HDA Intel PCH, HDMI 0
Direct sample snooping device
hw:CARD=PCH,DEV=0
HDA Intel PCH, 92HD99BXX Analog
Direct hardware device without any conversions
hw:CARD=PCH,DEV=3
HDA Intel PCH, HDMI 0
Direct hardware device without any conversions
plughw:CARD=PCH,DEV=0
HDA Intel PCH, 92HD99BXX Analog
Hardware device with all software conversions
plughw:CARD=PCH,DEV=3
HDA Intel PCH, HDMI 0
Hardware device with all software conversions
-------------- next part --------------
Card #0
Name: alsa_card.pci-0000_00_1b.0
Driver: module-alsa-card.c
Owner Module: 6
Properties:
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xc2700000 irq 29"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1c20"
device.product.name = "6 Series/C200 Series Chipset Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "0"
device.description = "Internes Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 60, available: yes)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6000, available: yes)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6060, available: yes)
output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5400, available: yes)
output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5460, available: yes)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 300, available: yes)
output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 360, available: yes)
off: Aus (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:analog-stereo+input:analog-stereo
Ports:
analog-input-internal-mic: Internes Mikrofon (priority: 8900, latency offset: 0 usec)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo
analog-input-mic: Mikrofon (priority: 8700, latency offset: 0 usec, not available)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo
analog-output: Analoge Ausgabe (priority: 9900, latency offset: 0 usec)
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
analog-output-speaker: Speakers (priority: 10000, latency offset: 0 usec)
Properties:
device.icon_name = "audio-speakers"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
analog-output-headphones: Analoge Kopfhörer (priority: 9000, latency offset: 0 usec, not available)
Properties:
device.icon_name = "audio-headphones"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
hdmi-output-0: HDMI / DisplayPort (priority: 5900, latency offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround, output:hdmi-surround+input:analog-stereo
-------------- next part --------------
Sink #0
State: SUSPENDED
Name: alsa_output.pci-0000_00_1b.0.analog-stereo
Description: Internes Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: no
Volume: front-left: 64047 / 98% / -0.60 dB, front-right: 64047 / 98% / -0.60 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "92HD99BXX Analog"
alsa.id = "92HD99BXX Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xc2700000 irq 29"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1c20"
device.product.name = "6 Series/C200 Series Chipset Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Internes Audio Analog Stereo"
alsa.mixer_name = "Intel CougarPoint HDMI"
alsa.components = "HDA:111d76e5,103c1899,00100102 HDA:80862805,80860101,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-output: Analoge Ausgabe (priority: 9900)
analog-output-speaker: Speakers (priority: 10000)
analog-output-headphones: Analoge Kopfhörer (priority: 9000, not available)
Active Port: analog-output-speaker
Formats:
pcm
-------------- next part --------------
Source #0
State: SUSPENDED
Name: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Description: Monitor of Internes Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_00_1b.0.analog-stereo
Latency: 0 usec, configured 0 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Internes Audio Analog Stereo"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xc2700000 irq 29"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1c20"
device.product.name = "6 Series/C200 Series Chipset Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formats:
pcm
Source #1
State: SUSPENDED
Name: alsa_input.pci-0000_00_1b.0.analog-stereo
Description: Internes Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: no
Volume: front-left: 18472 / 28% / -33.00 dB, front-right: 18472 / 28% / -33.00 dB
balance 0.00
Base Volume: 6554 / 10% / -60.00 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "92HD99BXX Analog"
alsa.id = "92HD99BXX Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xc2700000 irq 29"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1c20"
device.product.name = "6 Series/C200 Series Chipset Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Internes Audio Analog Stereo"
alsa.mixer_name = "Intel CougarPoint HDMI"
alsa.components = "HDA:111d76e5,103c1899,00100102 HDA:80862805,80860101,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-input-internal-mic: Internes Mikrofon (priority: 8900)
analog-input-mic: Mikrofon (priority: 8700, not available)
Active Port: analog-input-internal-mic
Formats:
pcm
-------------- next part --------------
Module #0
Name: module-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "5.0"
Module #1
Name: module-stream-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "5.0"
Module #2
Name: module-card-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "5.0"
Module #3
Name: module-augment-properties
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "5.0"
Module #4
Name: module-switch-on-port-available
Argument:
Usage counter: n/a
Properties:
Module #5
Name: module-udev-detect
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load matching drivers"
module.version = "5.0"
Module #6
Name: module-alsa-card
Argument: device_id="0" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "5.0"
Module #7
Name: module-bluetooth-policy
Argument:
Usage counter: n/a
Properties:
module.author = "Frédéric Dalleau"
module.description = "When a bluetooth sink or source is added, load module-loopback"
module.version = "5.0"
Module #8
Name: module-bluetooth-discover
Argument:
Usage counter: n/a
Properties:
module.author = "João Paulo Rechi Vita"
module.description = "Detect available Bluetooth daemon and load the corresponding discovery module"
module.version = "5.0"
Module #9
Name: module-bluez5-discover
Argument:
Usage counter: n/a
Properties:
module.author = "João Paulo Rechi Vita"
module.description = "Detect available BlueZ 5 Bluetooth audio devices and load BlueZ 5 Bluetooth audio drivers"
module.version = "5.0"
Module #10
Name: module-bluez4-discover
Argument:
Usage counter: n/a
Properties:
module.author = "João Paulo Rechi Vita"
module.description = "Detect available BlueZ 4 Bluetooth audio devices and load BlueZ 4 Bluetooth audio drivers"
module.version = "5.0"
Module #11
Name: module-native-protocol-unix
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "5.0"
Module #12
Name: module-gconf
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "GConf Adapter"
module.version = "5.0"
Module #13
Name: module-default-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink and source"
module.version = "5.0"
Module #14
Name: module-rescue-streams
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to move its streams to the default sink/source"
module.version = "5.0"
Module #15
Name: module-always-sink
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Hält stets einen Sink geladen, selbst wenn dies ein Null-Sink ist"
module.version = "5.0"
Module #16
Name: module-intended-roles
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based on intended roles of devices"
module.version = "5.0"
Module #17
Name: module-suspend-on-idle
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long, suspend it"
module.version = "5.0"
Module #18
Name: module-console-kit
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each ConsoleKit session of this user"
module.version = "5.0"
Module #19
Name: module-systemd-login
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of this user"
module.version = "5.0"
Module #20
Name: module-position-event-sounds
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
module.version = "5.0"
Module #21
Name: module-role-cork
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles while others exist"
module.version = "5.0"
Module #22
Name: module-filter-heuristics
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "5.0"
Module #23
Name: module-filter-apply
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when needed"
module.version = "5.0"
Module #24
Name: module-x11-publish
Argument: display=:0
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "X11 credential publisher"
module.version = "5.0"
Module #25
Name: module-x11-cork-request
Argument: display=:0
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Synthesize X11 media key events when cork/uncork is requested"
module.version = "5.0"
Module #26
Name: module-x11-xsmp
Argument: display=:0 session_manager=local/rosa:@/tmp/.ICE-unix/1487,unix/rosa:/tmp/.ICE-unix/1487
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "X11 session management"
module.version = "5.0"
-------------- next part --------------
Server String: unix:/run/user/1000/pulse/native
Library Protocol Version: 29
Server Protocol Version: 29
Is Local: yes
Client Index: 14
Tile Size: 65472
User Name: stefan
Host Name: rosa
Server Name: pulseaudio
Server Version: 5.0
Default Sample Specification: s16le 2ch 44100Hz
Default Channel Map: front-left,front-right
Default Sink: alsa_output.pci-0000_00_1b.0.analog-stereo
Default Source: alsa_input.pci-0000_00_1b.0.analog-stereo
Cookie: 992d:1073
-------------- next part --------------
[ 0.000000] CPU0 microcode updated early to revision 0x29, date = 2013-06-12
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.18.0-trunk-amd64 (debian-kernel at lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-9) ) #1 SMP Debian 3.18.3-1~exp1 (2015-01-18)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.18.0-trunk-amd64 root=/dev/mapper/rosa-root ro quiet splash
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000aa83dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000aa83e000-0x00000000aaa68fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000aaa69000-0x00000000acdd8fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000acdd9000-0x00000000ace1afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ace1b000-0x00000000ace3efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ace3f000-0x00000000acebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000acebf000-0x00000000acfbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000acfbf000-0x00000000acffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000acfff000-0x00000000acffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ad000000-0x00000000af9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP Folio 13 - 2000 Notebook PC/1899, BIOS F.19 01/23/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x14fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0AD000000 mask FFF000000 uncachable
[ 0.000000] 3 base 0AE000000 mask FFE000000 uncachable
[ 0.000000] 4 base 0B0000000 mask FF0000000 uncachable
[ 0.000000] 5 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 6 base 100000000 mask FC0000000 write-back
[ 0.000000] 7 base 140000000 mask FF0000000 write-back
[ 0.000000] 8 base 14FE00000 mask FFFE00000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xad000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b11000, 0x01b11fff] PGTABLE
[ 0.000000] BRK [0x01b12000, 0x01b12fff] PGTABLE
[ 0.000000] BRK [0x01b13000, 0x01b13fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x14fc00000-0x14fdfffff]
[ 0.000000] [mem 0x14fc00000-0x14fdfffff] page 2M
[ 0.000000] BRK [0x01b14000, 0x01b14fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x14c000000-0x14fbfffff]
[ 0.000000] [mem 0x14c000000-0x14fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff]
[ 0.000000] [mem 0x100000000-0x14bffffff] page 2M
[ 0.000000] BRK [0x01b15000, 0x01b15fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xaa83dfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xaa7fffff] page 2M
[ 0.000000] [mem 0xaa800000-0xaa83dfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xaaa69000-0xacdd8fff]
[ 0.000000] [mem 0xaaa69000-0xaabfffff] page 4k
[ 0.000000] [mem 0xaac00000-0xacbfffff] page 2M
[ 0.000000] [mem 0xacc00000-0xacdd8fff] page 4k
[ 0.000000] BRK [0x01b16000, 0x01b16fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xace1b000-0xace3efff]
[ 0.000000] [mem 0xace1b000-0xace3efff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xacfff000-0xacffffff]
[ 0.000000] [mem 0xacfff000-0xacffffff] page 4k
[ 0.000000] RAMDISK: [mem 0x35198000-0x368c3fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 0x00000000ACFFE120 00009C (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP 0x00000000ACFFB000 0000F4 (v04 HPQOEM SLIC-MPC 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x00000000ACFEA000 00D6E7 (v01 HP INSYDE 00000000 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x00000000ACF6B000 000040
[ 0.000000] ACPI: TCPA 0x00000000ACFFD000 000032 (v02 HP INSYDE 00000000 ACPI 00040000)
[ 0.000000] ACPI: HPET 0x00000000ACFFA000 000038 (v01 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x00000000ACFF9000 00008C (v02 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x00000000ACFF8000 00003C (v01 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: SLIC 0x00000000ACFE9000 000176 (v01 HPQOEM SLIC-MPC 00000001 ACPI 00040000)
[ 0.000000] ACPI: MSDM 0x00000000ACFE8000 000055 (v03 HPQOEM SLIC-MPC 00000001 ACPI 00040000)
[ 0.000000] ACPI: WDAT 0x00000000ACFE7000 000224 (v01 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x00000000ACFE6000 0006FE (v01 HP INSYDE 00001000 ACPI 00040000)
[ 0.000000] ACPI: BOOT 0x00000000ACFE4000 000028 (v01 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASPT 0x00000000ACFE1000 000034 (v07 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 0x00000000ACFFC000 0000A5 (v32 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x00000000ACFE0000 000804 (v01 HP INSYDE 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x00000000ACFDF000 000996 (v01 HP INSYDE 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x00000000ACFDE000 000335 (v01 HP INSYDE 00001000 INTL 20100121)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000014fdfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x14fdf7000-0x14fdfafff]
[ 0.000000] [ffffea0000000000-ffffea00049fffff] PMD -> [ffff88014b400000-ffff88014edfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x14fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xaa83dfff]
[ 0.000000] node 0: [mem 0xaaa69000-0xacdd8fff]
[ 0.000000] node 0: [mem 0xace1b000-0xace3efff]
[ 0.000000] node 0: [mem 0xacfff000-0xacffffff]
[ 0.000000] node 0: [mem 0x100000000-0x14fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x14fdfffff]
[ 0.000000] On node 0 totalpages: 1034607
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 156 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9618 pages used for memmap
[ 0.000000] DMA32 zone: 703443 pages, LIFO batch:31
[ 0.000000] Normal zone: 4473 pages used for memmap
[ 0.000000] Normal zone: 327168 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xada00000-0xaf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaa83e000-0xaaa68fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xacdd9000-0xace1afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xace3f000-0xacebefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xacebf000-0xacfbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xacfbf000-0xacffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xad000000-0xaf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[ 0.000000] e820: [mem 0xafa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88014fa00000 s83008 r8192 d31680 u262144
[ 0.000000] pcpu-alloc: s83008 r8192 d31680 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1020304
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.18.0-trunk-amd64 root=/dev/mapper/rosa-root ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3976008K/4138428K available (5416K kernel code, 1020K rwdata, 1868K rodata, 1228K init, 856K bss, 162420K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:33024 nr_irqs:488 0
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1596.298 MHz processor
[ 0.000048] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.59 BogoMIPS (lpj=6385192)
[ 0.000052] pid_max: default: 32768 minimum: 301
[ 0.000062] ACPI: Core revision 20140926
[ 0.014333] ACPI: All ACPI Tables successfully acquired
[ 0.026990] Security Framework initialized
[ 0.027001] AppArmor: AppArmor disabled by boot time parameter
[ 0.027003] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.027392] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.028654] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.029183] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.029193] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.029491] Initializing cgroup subsys memory
[ 0.029499] Initializing cgroup subsys devices
[ 0.029503] Initializing cgroup subsys freezer
[ 0.029507] Initializing cgroup subsys net_cls
[ 0.029509] Initializing cgroup subsys blkio
[ 0.029513] Initializing cgroup subsys perf_event
[ 0.029516] Initializing cgroup subsys net_prio
[ 0.029548] CPU: Physical Processor ID: 0
[ 0.029549] CPU: Processor Core ID: 0
[ 0.029555] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.029559] mce: CPU supports 7 MCE banks
[ 0.029571] CPU0: Thermal monitoring handled by SMI
[ 0.029582] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.029728] Freeing SMP alternatives memory: 20K (ffffffff81a34000 - ffffffff81a39000)
[ 0.031328] ftrace: allocating 21981 entries in 86 pages
[ 0.046266] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.085923] smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz (fam: 06, model: 2a, stepping: 07)
[ 0.085934] TSC deadline timer enabled
[ 0.085965] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[ 0.085995] ... version: 3
[ 0.085996] ... bit width: 48
[ 0.085998] ... generic registers: 4
[ 0.085999] ... value mask: 0000ffffffffffff
[ 0.086001] ... max period: 0000ffffffffffff
[ 0.086002] ... fixed-purpose events: 3
[ 0.086003] ... event mask: 000000070000000f
[ 0.087989] x86: Booting SMP configuration:
[ 0.087992] .... node #0, CPUs: #1
[ 0.098985] CPU1: Thermal monitoring handled by SMI
[ 0.101156] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.101278] #2
[ 0.112764] CPU2 microcode updated early to revision 0x29, date = 2013-06-12
[ 0.112806] CPU2: Thermal monitoring handled by SMI
[ 0.115034] #3
[ 0.126091] CPU3: Thermal monitoring handled by SMI
[ 0.128183] x86: Booted up 1 node, 4 CPUs
[ 0.128187] smpboot: Total of 4 processors activated (12770.38 BogoMIPS)
[ 0.132425] devtmpfs: initialized
[ 0.135815] PM: Registering ACPI NVS region [mem 0xacebf000-0xacfbefff] (1048576 bytes)
[ 0.137129] pinctrl core: initialized pinctrl subsystem
[ 0.137296] NET: Registered protocol family 16
[ 0.148179] cpuidle: using governor ladder
[ 0.158918] cpuidle: using governor menu
[ 0.159016] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.159018] ACPI: bus type PCI registered
[ 0.159020] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.159145] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.159148] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.159605] PCI: Using configuration type 1 for base access
[ 0.172788] ACPI: Added _OSI(Module Device)
[ 0.172791] ACPI: Added _OSI(Processor Device)
[ 0.172793] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.172795] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.177761] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.181762] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.182300] ACPI: Dynamic OEM Table Load:
[ 0.182314] ACPI: SSDT 0xFFFF88014F02C800 000727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.196533] ACPI: Dynamic OEM Table Load:
[ 0.196545] ACPI: SSDT 0xFFFF88014AB06C00 000303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.207088] ACPI: Dynamic OEM Table Load:
[ 0.207100] ACPI: SSDT 0xFFFF88014AAB6600 000119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.216973] ACPI: Interpreter enabled
[ 0.216983] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
[ 0.216990] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
[ 0.217011] ACPI: (supports S0 S3 S4 S5)
[ 0.217013] ACPI: Using IOAPIC for interrupt routing
[ 0.217053] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.279117] acpi ABCDEFGH:00: ACPI dock station (docks/bays count: 1)
[ 0.296476] ACPI: Power Resource [FN00] (off)
[ 0.296605] ACPI: Power Resource [FN01] (off)
[ 0.297585] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.297592] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.297642] \_SB_.PCI0:_OSC invalid UUID
[ 0.297644] _OSC request data:1 1f 0
[ 0.297649] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.298627] PCI host bridge to bus 0000:00
[ 0.298631] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.298634] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.298636] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.298639] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.298642] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff]
[ 0.298652] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.298785] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[ 0.298800] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
[ 0.298809] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.298815] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.298989] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.299022] pci 0000:00:16.0: reg 0x10: [mem 0xc2704000-0xc270400f 64bit]
[ 0.299124] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.299260] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.299608] pci 0000:00:1a.0: reg 0x10: [mem 0xc2709000-0xc27093ff]
[ 0.301653] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.301780] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.301808] pci 0000:00:1b.0: reg 0x10: [mem 0xc2700000-0xc2703fff 64bit]
[ 0.301927] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.301991] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.302054] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.302175] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.302242] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.302305] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[ 0.302421] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.302485] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.302547] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.302660] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.302724] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.302788] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 0.302935] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.303071] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.303419] pci 0000:00:1d.0: reg 0x10: [mem 0xc2708000-0xc27083ff]
[ 0.305465] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.305553] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.305621] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[ 0.305869] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.305898] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
[ 0.305911] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
[ 0.305923] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
[ 0.305934] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
[ 0.305947] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.305960] pci 0000:00:1f.2: reg 0x24: [mem 0xc2707000-0xc27077ff]
[ 0.306033] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.306145] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.306170] pci 0000:00:1f.3: reg 0x10: [mem 0xc2705000-0xc27050ff 64bit]
[ 0.306205] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
[ 0.306515] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.306602] pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.306732] pci 0000:01:00.0: reg 0x18: [mem 0xc0404000-0xc0404fff 64bit pref]
[ 0.306812] pci 0000:01:00.0: reg 0x20: [mem 0xc0400000-0xc0403fff 64bit pref]
[ 0.307207] pci 0000:01:00.0: supports D1 D2
[ 0.307209] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.307365] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.312495] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.312502] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.312512] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[ 0.312829] pci 0000:02:00.0: [8086:008b] type 00 class 0x028000
[ 0.313068] pci 0000:02:00.0: reg 0x10: [mem 0xc2600000-0xc2601fff 64bit]
[ 0.314235] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.314453] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.320569] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.320578] pci 0000:00:1c.2: bridge window [mem 0xc2600000-0xc26fffff]
[ 0.320756] pci 0000:03:00.0: [10ec:5209] type 00 class 0xff0000
[ 0.320828] pci 0000:03:00.0: reg 0x10: [mem 0xc1600000-0xc1600fff]
[ 0.321365] pci 0000:03:00.0: supports D1 D2
[ 0.321367] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
[ 0.321460] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.328491] pci 0000:00:1c.3: PCI bridge to [bus 03-08]
[ 0.328497] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.328502] pci 0000:00:1c.3: bridge window [mem 0xc1600000-0xc25fffff]
[ 0.328510] pci 0000:00:1c.3: bridge window [mem 0xc0500000-0xc14fffff 64bit pref]
[ 0.328761] pci 0000:09:00.0: [1b73:1009] type 00 class 0x0c0330
[ 0.328846] pci 0000:09:00.0: reg 0x10: [mem 0xc1500000-0xc150ffff 64bit]
[ 0.328906] pci 0000:09:00.0: reg 0x18: [mem 0xc1510000-0xc1510fff 64bit]
[ 0.328966] pci 0000:09:00.0: reg 0x20: [mem 0xc1511000-0xc1511fff 64bit]
[ 0.329236] pci 0000:09:00.0: supports D1
[ 0.329238] pci 0000:09:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.329339] pci 0000:09:00.0: System wakeup disabled by ACPI
[ 0.336539] pci 0000:00:1c.4: PCI bridge to [bus 09]
[ 0.336547] pci 0000:00:1c.4: bridge window [mem 0xc1500000-0xc15fffff]
[ 0.360682] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.360759] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.360832] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.360904] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.360975] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.361047] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.361118] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.361189] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.361529] ACPI: Enabled 7 GPEs in block 00 to 3F
[ 0.361581] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.362936] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.362939] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.362943] vgaarb: loaded
[ 0.362944] vgaarb: bridge control possible 0000:00:02.0
[ 0.363084] PCI: Using ACPI for IRQ routing
[ 0.370925] PCI: pci_cache_line_size set to 64 bytes
[ 0.371145] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.371147] e820: reserve RAM buffer [mem 0xaa83e000-0xabffffff]
[ 0.371149] e820: reserve RAM buffer [mem 0xacdd9000-0xafffffff]
[ 0.371152] e820: reserve RAM buffer [mem 0xace3f000-0xafffffff]
[ 0.371154] e820: reserve RAM buffer [mem 0xad000000-0xafffffff]
[ 0.371156] e820: reserve RAM buffer [mem 0x14fe00000-0x14fffffff]
[ 0.371352] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.371359] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.373392] Switched to clocksource hpet
[ 0.380538] pnp: PnP ACPI init
[ 0.380694] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.380786] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.380836] pnp 00:02: Plug and Play ACPI device, IDs SYN1e5a SYN0100 SYN0002 PNP0f13 (active)
[ 0.449583] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.449586] system 00:03: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.449589] system 00:03: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.449592] system 00:03: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.449595] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.449597] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.449600] system 00:03: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.449603] system 00:03: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.449606] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.449609] system 00:03: [mem 0xafa00000-0xafa00fff] has been reserved
[ 0.449613] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.449921] system 00:04: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.449924] system 00:04: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.449928] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.450027] pnp 00:05: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.450033] pnp: PnP ACPI: found 6 devices
[ 0.457690] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.457696] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.457708] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[ 0.457719] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.457726] pci 0000:00:1c.2: bridge window [mem 0xc2600000-0xc26fffff]
[ 0.457740] pci 0000:00:1c.3: PCI bridge to [bus 03-08]
[ 0.457744] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.457751] pci 0000:00:1c.3: bridge window [mem 0xc1600000-0xc25fffff]
[ 0.457757] pci 0000:00:1c.3: bridge window [mem 0xc0500000-0xc14fffff 64bit pref]
[ 0.457767] pci 0000:00:1c.4: PCI bridge to [bus 09]
[ 0.457775] pci 0000:00:1c.4: bridge window [mem 0xc1500000-0xc15fffff]
[ 0.457790] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.457793] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.457795] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.457798] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff]
[ 0.457800] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.457803] pci_bus 0000:01: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref]
[ 0.457805] pci_bus 0000:02: resource 1 [mem 0xc2600000-0xc26fffff]
[ 0.457808] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.457810] pci_bus 0000:03: resource 1 [mem 0xc1600000-0xc25fffff]
[ 0.457813] pci_bus 0000:03: resource 2 [mem 0xc0500000-0xc14fffff 64bit pref]
[ 0.457815] pci_bus 0000:09: resource 1 [mem 0xc1500000-0xc15fffff]
[ 0.457884] NET: Registered protocol family 2
[ 0.458151] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.458269] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.458372] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.458400] TCP: reno registered
[ 0.458408] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.458434] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.458522] NET: Registered protocol family 1
[ 0.458542] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.491292] PCI: CLS 64 bytes, default 64
[ 0.491351] Unpacking initramfs...
[ 1.121781] Freeing initrd memory: 23728K (ffff880035198000 - ffff8800368c4000)
[ 1.121806] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.121809] software IO TLB [mem 0xa683e000-0xaa83e000] (64MB) mapped at [ffff8800a683e000-ffff8800aa83dfff]
[ 1.121866] Simple Boot Flag at 0x44 set to 0x80
[ 1.122109] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 1.122170] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
[ 1.122180] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x29
[ 1.122190] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x29
[ 1.122199] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
[ 1.122281] microcode: Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
[ 1.122769] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 1.122832] audit: initializing netlink subsys (disabled)
[ 1.122854] audit: type=2000 audit(1422612062.108:1): initialized
[ 1.123301] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.123331] zpool: loaded
[ 1.123550] VFS: Disk quotas dquot_6.5.2
[ 1.123579] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.123664] msgmni has been set to 7812
[ 1.124196] alg: No test for stdrng (krng)
[ 1.124236] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.124285] io scheduler noop registered
[ 1.124289] io scheduler deadline registered
[ 1.124296] io scheduler cfq registered (default)
[ 1.125016] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.125039] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.125109] intel_idle: MWAIT substates: 0x21120
[ 1.125111] intel_idle: v0.4 model 0x2A
[ 1.125113] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.125413] GHES: HEST is not enabled!
[ 1.125514] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.126082] Linux agpgart interface v0.103
[ 1.126238] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.165836] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.165843] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.166036] mousedev: PS/2 mouse device common for all mice
[ 1.166241] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 1.166277] rtc_cmos 00:00: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.166297] Intel P-state driver initializing.
[ 1.167827] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.168411] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel at amd.com>
[ 1.168415] AMD IOMMUv2 functionality not available on this system
[ 1.168658] TCP: cubic registered
[ 1.168754] NET: Registered protocol family 10
[ 1.169419] mip6: Mobile IPv6
[ 1.169431] NET: Registered protocol family 17
[ 1.169448] mpls_gso: MPLS GSO support
[ 1.170396] registered taskstats version 1
[ 1.171621] rtc_cmos 00:00: setting system clock to 2015-01-30 10:01:02 UTC (1422612062)
[ 1.171864] PM: Hibernation image not present or could not be loaded.
[ 1.175127] Freeing unused kernel memory: 1228K (ffffffff81901000 - ffffffff81a34000)
[ 1.175131] Write protecting the kernel read-only data: 8192k
[ 1.179460] Freeing unused kernel memory: 716K (ffff88000154d000 - ffff880001600000)
[ 1.180537] Freeing unused kernel memory: 180K (ffff8800017d3000 - ffff880001800000)
[ 1.213988] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.244844] systemd-udevd[76]: starting version 215
[ 1.245238] random: systemd-udevd urandom read with 2 bits of entropy available
[ 1.255581] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 1.256579] ACPI: Lid Switch [LID0]
[ 1.257610] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.257618] ACPI: Power Button [PWRF]
[ 1.262391] wmi: Mapper loaded
[ 1.266209] ACPI: bus type USB registered
[ 1.266260] usbcore: registered new interface driver usbfs
[ 1.266285] usbcore: registered new interface driver hub
[ 1.266343] usbcore: registered new device driver usb
[ 1.266987] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.266992] ACPI: Thermal Zone [TZ00] (62 C)
[ 1.267927] [drm] Initialized drm 1.1.0 20060810
[ 1.269572] rtsx_pci 0000:03:00.0: irq 24 for MSI/MSI-X
[ 1.269600] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 24
[ 1.270423] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.271015] ehci-pci: EHCI PCI platform driver
[ 1.271264] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.272443] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.272470] ehci-pci 0000:00:1a.0: debug port 2
[ 1.273437] SCSI subsystem initialized
[ 1.276378] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.276447] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc2709000
[ 1.278292] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.278308] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.278376] AVX version of gcm_enc/dec engaged.
[ 1.278378] AES CTR mode by8 optimization enabled
[ 1.278761] r8169 0000:01:00.0: irq 25 for MSI/MSI-X
[ 1.278802] libata version 3.00 loaded.
[ 1.279113] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000670000, 28:92:4a:1d:09:94, XID 0c900800 IRQ 25
[ 1.279118] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.284781] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.285070] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.285077] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.285081] usb usb1: Product: EHCI Host Controller
[ 1.285085] usb usb1: Manufacturer: Linux 3.18.0-trunk-amd64 ehci_hcd
[ 1.285089] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.285573] hub 1-0:1.0: USB hub found
[ 1.285596] hub 1-0:1.0: 2 ports detected
[ 1.286270] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.286283] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.286305] ehci-pci 0000:00:1d.0: debug port 2
[ 1.290220] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.290251] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc2708000
[ 1.291194] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 1.298351] alg: No test for crc32 (crc32-pclmul)
[ 1.300757] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.300994] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.300999] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.301002] usb usb2: Product: EHCI Host Controller
[ 1.301004] usb usb2: Manufacturer: Linux 3.18.0-trunk-amd64 ehci_hcd
[ 1.301006] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.301239] hub 2-0:1.0: USB hub found
[ 1.301262] hub 2-0:1.0: 2 ports detected
[ 1.301475] ahci 0000:00:1f.2: version 3.0
[ 1.301696] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
[ 1.301744] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.301778] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[ 1.301784] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems apst
[ 1.303098] scsi host0: ahci
[ 1.303260] scsi host1: ahci
[ 1.303403] scsi host2: ahci
[ 1.303543] scsi host3: ahci
[ 1.303686] scsi host4: ahci
[ 1.303824] scsi host5: ahci
[ 1.303893] ata1: SATA max UDMA/133 abar m2048 at 0xc2707000 port 0xc2707100 irq 26
[ 1.303895] ata2: DUMMY
[ 1.303897] ata3: DUMMY
[ 1.303898] ata4: DUMMY
[ 1.303900] ata5: DUMMY
[ 1.303901] ata6: DUMMY
[ 1.304693] [drm] Memory usable by graphics device = 2048M
[ 1.304697] [drm] Replacing VGA console driver
[ 1.305226] Console: switching to colour dummy device 80x25
[ 1.328774] i915 0000:00:02.0: irq 27 for MSI/MSI-X
[ 1.328785] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.328786] [drm] Driver supports precise vblank timestamp query.
[ 1.328828] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1.328874] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.328901] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1.328950] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1.328969] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1.329285] pci_bus 0000:01: Allocating resources
[ 1.329308] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 400000
[ 1.329317] pci_bus 0000:02: Allocating resources
[ 1.329382] pcieport 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 1.329385] pcieport 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 1.329396] pci_bus 0000:03: Allocating resources
[ 1.329421] pci_bus 0000:09: Allocating resources
[ 1.329520] pcieport 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 09] add_size 1000
[ 1.329523] pcieport 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000
[ 1.329526] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1.329532] pcieport 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[ 1.329535] pcieport 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 1.329538] pcieport 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 1.329541] pcieport 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 1.329543] pcieport 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 1.329549] pcieport 0000:00:1c.0: BAR 14: assigned [mem 0xafb00000-0xafefffff]
[ 1.329556] pcieport 0000:00:1c.2: BAR 15: assigned [mem 0xc2800000-0xc29fffff 64bit pref]
[ 1.329562] pcieport 0000:00:1c.4: BAR 15: assigned [mem 0xc2a00000-0xc2bfffff 64bit pref]
[ 1.329566] pcieport 0000:00:1c.2: BAR 13: assigned [io 0x1000-0x1fff]
[ 1.329570] pcieport 0000:00:1c.4: BAR 13: assigned [io 0x5000-0x5fff]
[ 1.329725] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1.369796] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.370370] acpi device:32: registered as cooling_device2
[ 1.370495] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 1.370541] [drm] Initialized i915 1.6.0 20140905 for 0000:00:02.0 on minor 0
[ 1.424723] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[ 1.442559] fbcon: inteldrmfb (fb0) is primary device
[ 1.596688] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.612670] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.620630] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.623987] ata1.00: ATA-8: SAMSUNG MZMPA128HMFU-000H1, AXM18H1Q, max UDMA/133
[ 1.623991] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.625787] ata1.00: configured for UDMA/133
[ 1.626217] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZMPA128 8H1Q PQ: 0 ANSI: 5
[ 1.729293] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.729298] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.730010] hub 1-1:1.0: USB hub found
[ 1.730183] hub 1-1:1.0: 6 ports detected
[ 1.745298] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.745303] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.745974] hub 2-1:1.0: USB hub found
[ 1.746081] hub 2-1:1.0: 6 ports detected
[ 2.000629] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[ 2.016573] usb 2-1.2: new full-speed USB device number 3 using ehci-pci
[ 2.112745] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c52b
[ 2.112749] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.112752] usb 2-1.2: Product: USB Receiver
[ 2.112754] usb 2-1.2: Manufacturer: Logitech
[ 2.116446] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.120229] tsc: Refined TSC clocksource calibration: 1596.373 MHz
[ 2.122236] usbcore: registered new interface driver usbhid
[ 2.122238] usbhid: USB HID core driver
[ 2.125692] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input2
[ 2.164852] Console: switching to colour frame buffer device 170x48
[ 2.171568] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.171573] i915 0000:00:02.0: registered panic notifier
[ 2.181991] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 2.182114] sd 0:0:0:0: [sda] Write Protect is off
[ 2.182120] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.182159] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.182728] input: Logitech Unifying Device. Wireless PID:4002 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input5
[ 2.182833] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4002] on usb-0000:00:1d.0-1.2:1
[ 2.184619] input: Logitech Unifying Device. Wireless PID:101b as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0005/input/input6
[ 2.184811] sda: sda1 sda2 < sda5 >
[ 2.184851] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101b] on usb-0000:00:1d.0-1.2:2
[ 2.185778] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.186818] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.424308] usb 1-1.1: New USB device found, idVendor=1bcf, idProduct=2c07
[ 2.424315] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.424319] usb 1-1.1: Product: HP TrueVision HD
[ 2.424323] usb 1-1.1: Manufacturer: PK40000GO00LOE40A1CO0001A9B
[ 2.599403] device-mapper: uevent: version 1.0.3
[ 2.599521] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel at redhat.com
[ 2.716108] usb 1-1.2: new full-speed USB device number 4 using ehci-pci
[ 2.812906] usb 1-1.2: New USB device found, idVendor=8086, idProduct=0189
[ 2.812914] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.119846] Switched to clocksource tsc
[ 22.099822] NET: Registered protocol family 38
[ 22.308608] random: nonblocking pool is initialized
[ 22.410269] PM: Starting manual resume from disk
[ 22.410278] PM: Hibernation image partition 254:2 present
[ 22.410280] PM: Looking for hibernation image.
[ 22.410709] PM: Image not found (code -22)
[ 22.410714] PM: Hibernation image not present or could not be loaded.
[ 22.427556] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 22.990372] lp: driver loaded but no devices found
[ 22.993120] ppdev: user-space parallel port driver
[ 23.000410] fuse init (API version 7.23)
[ 23.014627] loop: module loaded
[ 23.026385] systemd-udevd[299]: starting version 215
[ 23.189375] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 23.235654] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 23.236976] mei_me 0000:00:16.0: irq 28 for MSI/MSI-X
[ 23.237219] Initializing HPQ6001 module
[ 23.237806] tpm_tis 00:05: 1.2 TPM (device-id 0xB, rev-id 16)
[ 23.264342] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140926/utaddress-258)
[ 23.264354] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 23.264360] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-258)
[ 23.264368] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 23.264371] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-258)
[ 23.264378] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 23.264381] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-258)
[ 23.264387] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 23.264390] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 23.266619] snd_hda_intel 0000:00:1b.0: irq 29 for MSI/MSI-X
[ 23.269703] ACPI Warning: SystemIO range 0x0000000000004040-0x000000000000405f conflicts with OpRegion 0x0000000000004040-0x000000000000404f (\_SB_.PCI0.SBUS.SMBI) (20140926/utaddress-258)
[ 23.269715] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 23.273032] xhci_hcd 0000:09:00.0: xHCI Host Controller
[ 23.273047] xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 3
[ 23.274121] xhci_hcd 0000:09:00.0: irq 30 for MSI/MSI-X
[ 23.274131] xhci_hcd 0000:09:00.0: irq 31 for MSI/MSI-X
[ 23.274139] xhci_hcd 0000:09:00.0: irq 32 for MSI/MSI-X
[ 23.274148] xhci_hcd 0000:09:00.0: irq 33 for MSI/MSI-X
[ 23.274156] xhci_hcd 0000:09:00.0: irq 34 for MSI/MSI-X
[ 23.274848] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 23.274854] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 23.274858] usb usb3: Product: xHCI Host Controller
[ 23.274861] usb usb3: Manufacturer: Linux 3.18.0-trunk-amd64 xhci-hcd
[ 23.274865] usb usb3: SerialNumber: 0000:09:00.0
[ 23.275216] hub 3-0:1.0: USB hub found
[ 23.275320] hub 3-0:1.0: 2 ports detected
[ 23.278713] xhci_hcd 0000:09:00.0: xHCI Host Controller
[ 23.278723] xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 4
[ 23.278888] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 23.278893] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 23.278897] usb usb4: Product: xHCI Host Controller
[ 23.278901] usb usb4: Manufacturer: Linux 3.18.0-trunk-amd64 xhci-hcd
[ 23.278905] usb usb4: SerialNumber: 0000:09:00.0
[ 23.280482] hub 4-0:1.0: USB hub found
[ 23.280583] hub 4-0:1.0: 2 ports detected
[ 23.293262] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 23.303086] Bluetooth: Core ver 2.19
[ 23.303109] NET: Registered protocol family 31
[ 23.303112] Bluetooth: HCI device and connection manager initialized
[ 23.303123] Bluetooth: HCI socket layer initialized
[ 23.303127] Bluetooth: L2CAP socket layer initialized
[ 23.303139] Bluetooth: SCO socket layer initialized
[ 23.304928] cfg80211: Calling CRDA to update world regulatory domain
[ 23.313549] sound hdaudioC0D0: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[ 23.313557] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 23.313562] sound hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[ 23.313565] sound hdaudioC0D0: mono: mono_out=0x0
[ 23.313569] sound hdaudioC0D0: inputs:
[ 23.313573] sound hdaudioC0D0: Internal Mic=0x11
[ 23.313577] sound hdaudioC0D0: Mic=0xa
[ 23.313644] usbcore: registered new interface driver btusb
[ 23.317806] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 23.317811] Copyright(c) 2003- 2014 Intel Corporation
[ 23.318025] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 23.318199] iwlwifi 0000:02:00.0: irq 35 for MSI/MSI-X
[ 23.320727] media: Linux media interface: v0.10
[ 23.329777] Linux video capture interface: v2.00
[ 23.345591] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-6000g2b-6.ucode
[ 23.345891] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 23.353785] kvm: disabled by bios
[ 23.360815] intel_rapl: Found RAPL domain package
[ 23.360822] intel_rapl: Found RAPL domain core
[ 23.360825] intel_rapl: Found RAPL domain uncore
[ 23.365725] uvcvideo: Found UVC 1.00 device HP TrueVision HD (1bcf:2c07)
[ 23.374427] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input9
[ 23.378044] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 23.381834] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 23.382772] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 23.397146] ACPI: AC Adapter [ACAD] (off-line)
[ 23.400699] iTCO_vendor_support: vendor-support=0
[ 23.405100] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 23.405154] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 23.405355] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 23.405361] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 23.405365] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 23.405370] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 1030 BGN, REV=0xB0
[ 23.406254] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[ 23.410025] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 23.429136] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 23.447458] input: HP TrueVision HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input14
[ 23.447565] usbcore: registered new interface driver uvcvideo
[ 23.447568] USB Video Class driver (1.1.1)
[ 23.449810] Adding 4624380k swap on /dev/mapper/rosa-swap_1. Priority:-1 extents:1 across:4624380k SSFS
[ 23.465670] cfg80211: World regulatory domain updated:
[ 23.465675] cfg80211: DFS Master region: unset
[ 23.465677] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 23.465681] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 23.465684] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 23.465686] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 23.465689] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 23.465692] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 23.465694] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 23.465697] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 23.465699] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 23.492911] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 23.505377] tpm_tis 00:05: TPM is disabled/deactivated (0x7)
[ 23.641029] ACPI: Battery Slot [BAT1] (battery present)
[ 23.870210] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 23.876968] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 23.885197] systemd-journald[281]: Received request to flush runtime journal from PID 1
[ 24.050280] input: HP WMI hotkeys as /devices/virtual/input/input10
[ 24.187518] RPC: Registered named UNIX socket transport module.
[ 24.187523] RPC: Registered udp transport module.
[ 24.187525] RPC: Registered tcp transport module.
[ 24.187526] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 24.192847] FS-Cache: Loaded
[ 24.207984] FS-Cache: Netfs 'nfs' registered for caching
[ 24.223599] Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
[ 24.568838] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 24.568843] Bluetooth: BNEP filters: protocol multicast
[ 24.568854] Bluetooth: BNEP socket layer initialized
[ 25.153322] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126c00, board id: 2031, fw id: 988796
[ 25.275311] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 27.363647] r8169 0000:01:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw
[ 27.480435] r8169 0000:01:00.0 eth0: link down
[ 27.485774] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[ 27.492457] iwlwifi 0000:02:00.0: Radio type=0x2-0x2-0x1
[ 27.562396] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[ 27.569069] iwlwifi 0000:02:00.0: Radio type=0x2-0x2-0x1
[ 74.639656] wlan0: authenticate with 70:72:3c:20:76:08
[ 74.642305] wlan0: send auth to 70:72:3c:20:76:08 (try 1/3)
[ 74.647794] wlan0: authenticated
[ 74.650767] wlan0: associate with 70:72:3c:20:76:08 (try 1/3)
[ 74.656997] wlan0: RX AssocResp from 70:72:3c:20:76:08 (capab=0x431 status=0 aid=4)
[ 74.665088] wlan0: associated
[ 74.665197] cfg80211: Calling CRDA for country: CA
[ 74.671345] cfg80211: Regulatory domain changed to country: CA
[ 74.671353] cfg80211: DFS Master region: FCC
[ 74.671356] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 74.671362] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[ 74.671368] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
[ 74.671373] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2400 mBm), (0 s)
[ 74.671378] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2400 mBm), (0 s)
[ 74.671382] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 1368.263642] input: 00:02:3C:49:93:08 as /devices/virtual/input/input15
[ 1401.558197] input: 00:02:3C:49:93:08 as /devices/virtual/input/input16
[ 1426.880218] input: 00:02:3C:49:93:08 as /devices/virtual/input/input17
-------------- next part --------------
I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) fehlgeschlagen: Die Operation ist nicht erlaubt
I: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) fehlgeschlagen: Die Operation ist nicht erlaubt
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: Dies ist PulseAudio 5.0
I: [pulseaudio] main.c: Seitengröße ist 4096 Bytes.
I: [pulseaudio] main.c: System- ID ist d1eaf6bfa0e7963ebd090de1537e54cd.
I: [pulseaudio] main.c: System- ID ist 1.
I: [pulseaudio] main.c: Nutze Laufzeit-Verzeichnis /run/user/1000/pulse.
I: [pulseaudio] main.c: Nutze Zustands-Verzeichnis /home/stefan/.pulse.
I: [pulseaudio] main.c: Modul-Verzeichnis /usr/lib/pulse-5.0/modules benutzen.
I: [pulseaudio] main.c: Laufe im System-Modus: no
I: [pulseaudio] main.c: Neue hochauslösende Timer verfügbar! Guten Appetit!
I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2
I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/stefan/.pulse/d1eaf6bfa0e7963ebd090de1537e54cd-device-volumes'.
I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/stefan/.pulse/d1eaf6bfa0e7963ebd090de1537e54cd-stream-volumes'.
I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/stefan/.pulse/d1eaf6bfa0e7963ebd090de1537e54cd-card-database'.
I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HDA Intel PCH/HDA Intel PCH.conf
I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HDA Intel PCH
I: [pulseaudio] (alsa-lib)main.c: error: failed to import HDA Intel PCH use case configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card HDA Intel PCH
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:0: Das Argument ist ungültig
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: Datei oder Verzeichnis nicht gefunden
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: Datei oder Verzeichnis nicht gefunden
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:0: Das Argument ist ungültig
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: Datei oder Verzeichnis nicht gefunden
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround40:0: Das Argument ist ungültig
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround41:0: Das Argument ist ungültig
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround50:0: Das Argument ist ungültig
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround51:0: Das Argument ist ungültig
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround71:0: Das Argument ist ungültig
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: Datei oder Verzeichnis nicht gefunden
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: Datei oder Verzeichnis nicht gefunden
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: Datei oder Verzeichnis nicht gefunden
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:0
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:0: Datei oder Verzeichnis nicht gefunden
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0: Datei oder Verzeichnis nicht gefunden
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0: Datei oder Verzeichnis nicht gefunden
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D7p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,1: Datei oder Verzeichnis nicht gefunden
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D7p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,1: Datei oder Verzeichnis nicht gefunden
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D8p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,2: Datei oder Verzeichnis nicht gefunden
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D8p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,2: Datei oder Verzeichnis nicht gefunden
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D9p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,3: Datei oder Verzeichnis nicht gefunden
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D9p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,3: Datei oder Verzeichnis nicht gefunden
I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_00_1b.0.
I: [pulseaudio] card.c: Created 0 "alsa_card.pci-0000_00_1b.0"
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
I: [pulseaudio] alsa-sink.c: Successfully opened device front:0.
I: [pulseaudio] alsa-sink.c: Selected mapping 'Analog Stereo' (analog-stereo).
I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: Datei oder Verzeichnis nicht gefunden
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] module-device-restore.c: Restoring port for sink sink:alsa_output.pci-0000_00_1b.0.analog-stereo.
I: [pulseaudio] module-device-restore.c: Restoring volume for sink alsa_output.pci-0000_00_1b.0.analog-stereo: front-left: 59910 / 91%, front-right: 59910 / 91%
I: [pulseaudio] module-device-restore.c: Restoring mute state for sink alsa_output.pci-0000_00_1b.0.analog-stereo.
I: [pulseaudio] sink.c: Created sink 0 "alsa_output.pci-0000_00_1b.0.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
I: [pulseaudio] sink.c: device.api = "alsa"
I: [pulseaudio] sink.c: device.class = "sound"
I: [pulseaudio] sink.c: alsa.class = "generic"
I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
I: [pulseaudio] sink.c: alsa.name = "92HD99BXX Analog"
I: [pulseaudio] sink.c: alsa.id = "92HD99BXX Analog"
I: [pulseaudio] sink.c: alsa.subdevice = "0"
I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] sink.c: alsa.device = "0"
I: [pulseaudio] sink.c: alsa.card = "0"
I: [pulseaudio] sink.c: alsa.card_name = "HDA Intel PCH"
I: [pulseaudio] sink.c: alsa.long_card_name = "HDA Intel PCH at 0xc2700000 irq 34"
I: [pulseaudio] sink.c: alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] sink.c: device.bus_path = "pci-0000:00:1b.0"
I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
I: [pulseaudio] sink.c: device.bus = "pci"
I: [pulseaudio] sink.c: device.vendor.id = "8086"
I: [pulseaudio] sink.c: device.vendor.name = "Intel Corporation"
I: [pulseaudio] sink.c: device.product.id = "1c20"
I: [pulseaudio] sink.c: device.product.name = "6 Series/C200 Series Chipset Family High Definition Audio Controller"
I: [pulseaudio] sink.c: device.form_factor = "internal"
I: [pulseaudio] sink.c: device.string = "front:0"
I: [pulseaudio] sink.c: device.buffering.buffer_size = "65536"
I: [pulseaudio] sink.c: device.buffering.fragment_size = "32768"
I: [pulseaudio] sink.c: device.access_mode = "mmap+timer"
I: [pulseaudio] sink.c: device.profile.name = "analog-stereo"
I: [pulseaudio] sink.c: device.profile.description = "Analog Stereo"
I: [pulseaudio] sink.c: device.description = "Internes Audio Analog Stereo"
I: [pulseaudio] sink.c: alsa.mixer_name = "Intel CougarPoint HDMI"
I: [pulseaudio] sink.c: alsa.components = "HDA:111d76e5,103c1899,00100102 HDA:80862805,80860101,00100000"
I: [pulseaudio] sink.c: module-udev-detect.discovered = "1"
I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] source.c: Created source 0 "alsa_output.pci-0000_00_1b.0.analog-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c: device.description = "Monitor of Internes Audio Analog Stereo"
I: [pulseaudio] source.c: device.class = "monitor"
I: [pulseaudio] source.c: alsa.card = "0"
I: [pulseaudio] source.c: alsa.card_name = "HDA Intel PCH"
I: [pulseaudio] source.c: alsa.long_card_name = "HDA Intel PCH at 0xc2700000 irq 34"
I: [pulseaudio] source.c: alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] source.c: device.bus_path = "pci-0000:00:1b.0"
I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
I: [pulseaudio] source.c: device.bus = "pci"
I: [pulseaudio] source.c: device.vendor.id = "8086"
I: [pulseaudio] source.c: device.vendor.name = "Intel Corporation"
I: [pulseaudio] source.c: device.product.id = "1c20"
I: [pulseaudio] source.c: device.product.name = "6 Series/C200 Series Chipset Family High Definition Audio Controller"
I: [pulseaudio] source.c: device.form_factor = "internal"
I: [pulseaudio] source.c: device.string = "0"
I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] alsa-sink.c: Using 2,0 fragments of size 32768 bytes (185,76ms), buffer size is 65536 bytes (371,52ms)
I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20,00ms
I: [pulseaudio] alsa-sink.c: Successfully enabled deferred volume.
I: [pulseaudio] alsa-sink.c: Hardware volume ranges from -200050,98 dB to 0,00 dB.
I: [pulseaudio] alsa-sink.c: Fixing base volume to 0,00 dB
I: [pulseaudio] alsa-sink.c: Using hardware volume control. Hardware dB scale supported.
I: [pulseaudio] alsa-sink.c: Using hardware mute control.
I: [alsa-sink-92HD99BXX Analog] core-util.c: Clamping rlimit-rttime to 200000 for RealtimeKit
I: [alsa-sink-92HD99BXX Analog] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-sink-92HD99BXX Analog] alsa-sink.c: Starting playback.
I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
I: [pulseaudio] alsa-source.c: Successfully opened device front:0.
I: [pulseaudio] alsa-source.c: Selected mapping 'Analog Stereo' (analog-stereo).
I: [pulseaudio] alsa-source.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-source.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: Datei oder Verzeichnis nicht gefunden
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] module-device-restore.c: Restoring port for source source:alsa_input.pci-0000_00_1b.0.analog-stereo.
I: [pulseaudio] module-device-restore.c: Restoring volume for source alsa_input.pci-0000_00_1b.0.analog-stereo: front-left: 18472 / 28%, front-right: 18472 / 28%
I: [pulseaudio] source.c: Created source 1 "alsa_input.pci-0000_00_1b.0.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c: alsa.resolution_bits = "16"
I: [pulseaudio] source.c: device.api = "alsa"
I: [pulseaudio] source.c: device.class = "sound"
I: [pulseaudio] source.c: alsa.class = "generic"
I: [pulseaudio] source.c: alsa.subclass = "generic-mix"
I: [pulseaudio] source.c: alsa.name = "92HD99BXX Analog"
I: [pulseaudio] source.c: alsa.id = "92HD99BXX Analog"
I: [pulseaudio] source.c: alsa.subdevice = "0"
I: [pulseaudio] source.c: alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] source.c: alsa.device = "0"
I: [pulseaudio] source.c: alsa.card = "0"
I: [pulseaudio] source.c: alsa.card_name = "HDA Intel PCH"
I: [pulseaudio] source.c: alsa.long_card_name = "HDA Intel PCH at 0xc2700000 irq 34"
I: [pulseaudio] source.c: alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] source.c: device.bus_path = "pci-0000:00:1b.0"
I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
I: [pulseaudio] source.c: device.bus = "pci"
I: [pulseaudio] source.c: device.vendor.id = "8086"
I: [pulseaudio] source.c: device.vendor.name = "Intel Corporation"
I: [pulseaudio] source.c: device.product.id = "1c20"
I: [pulseaudio] source.c: device.product.name = "6 Series/C200 Series Chipset Family High Definition Audio Controller"
I: [pulseaudio] source.c: device.form_factor = "internal"
I: [pulseaudio] source.c: device.string = "front:0"
I: [pulseaudio] source.c: device.buffering.buffer_size = "65536"
I: [pulseaudio] source.c: device.buffering.fragment_size = "32768"
I: [pulseaudio] source.c: device.access_mode = "mmap+timer"
I: [pulseaudio] source.c: device.profile.name = "analog-stereo"
I: [pulseaudio] source.c: device.profile.description = "Analog Stereo"
I: [pulseaudio] source.c: device.description = "Internes Audio Analog Stereo"
I: [pulseaudio] source.c: alsa.mixer_name = "Intel CougarPoint HDMI"
I: [pulseaudio] source.c: alsa.components = "HDA:111d76e5,103c1899,00100102 HDA:80862805,80860101,00100000"
I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] alsa-source.c: Using 2,0 fragments of size 32768 bytes (185,76ms), buffer size is 65536 bytes (371,52ms)
I: [pulseaudio] alsa-source.c: Time scheduling watermark is 20,00ms
I: [pulseaudio] alsa-source.c: Successfully enabled deferred volume.
I: [pulseaudio] alsa-source.c: Hardware volume ranges from -16,00 dB to 60,00 dB.
I: [pulseaudio] alsa-source.c: Fixing base volume to -60,00 dB
I: [pulseaudio] alsa-source.c: Using hardware volume control. Hardware dB scale supported.
I: [pulseaudio] alsa-source.c: Using hardware mute control.
I: [alsa-source-92HD99BXX Analog] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-source-92HD99BXX Analog] alsa-source.c: Starting capture.
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #6; argument: "device_id="0" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:1b.0/sound/card0 (alsa_card.pci-0000_00_1b.0) module loaded.
I: [pulseaudio] module-udev-detect.c: Found 1 cards.
I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "").
I: [pulseaudio] module.c: Loaded "module-bluetooth-policy" (index: #7; argument: "").
I: [pulseaudio] module.c: Loaded "module-bluez5-discover" (index: #9; argument: "").
I: [pulseaudio] module.c: Loaded "module-bluez4-discover" (index: #10; argument: "").
I: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #8; argument: "").
I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #11; argument: "").
I: [pulseaudio] module.c: Loaded "module-gconf" (index: #12; argument: "").
I: [pulseaudio] module-default-device-restore.c: Saved default sink 'bluez_sink.00_02_3C_49_93_08' not existent, not restoring default sink setting.
I: [pulseaudio] module-default-device-restore.c: Restored default source 'alsa_input.pci-0000_00_1b.0.analog-stereo'.
I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #13; argument: "").
I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #14; argument: "").
I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #15; argument: "").
I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #16; argument: "").
I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #17; argument: "").
I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #18; argument: "").
I: [pulseaudio] client.c: Created 0 "Login Session 1"
I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #19; argument: "").
I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #20; argument: "").
I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #21; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #22; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #23; argument: "").
I: [pulseaudio] main.c: Start des Daemons abgeschlossen.
I: [pulseaudio] client.c: Created 1 "Native client (UNIX socket client)"
E: [pulseaudio] bluez4-util.c: org.bluez.Manager.GetProperties() failed: org.freedesktop.DBus.Error.UnknownMethod: Method "GetProperties" with signature "" on interface "org.bluez.Manager" doesn't exist
I: [pulseaudio] client.c: Created 2 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
I: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_1b.0.analog-stereo idle for too long, suspending ...
I: [alsa-source-92HD99BXX Analog] alsa-source.c: Device suspended...
I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo idle for too long, suspending ...
I: [alsa-sink-92HD99BXX Analog] alsa-sink.c: Device suspended...
I: [pulseaudio] client.c: Created 3 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
I: [pulseaudio] source-output.c: Trying to change sample rate
I: [alsa-source-92HD99BXX Analog] alsa-source.c: Trying resume...
I: [alsa-source-92HD99BXX Analog] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
I: [alsa-source-92HD99BXX Analog] alsa-util.c: ALSA period wakeups disabled
I: [alsa-source-92HD99BXX Analog] alsa-source.c: Time scheduling watermark is 20,00ms
I: [alsa-source-92HD99BXX Analog] alsa-source.c: Resumed successfully...
I: [alsa-source-92HD99BXX Analog] alsa-source.c: Starting capture.
I: [pulseaudio] remap.c: Using generic matrix remapping
I: [pulseaudio] source-output.c: Created output 0 "Spitzenpegelerkennung" on alsa_input.pci-0000_00_1b.0.analog-stereo with sample spec float32le 1ch 25Hz and channel map mono
I: [pulseaudio] source-output.c: application.id = "org.gnome.VolumeControl"
I: [pulseaudio] source-output.c: media.name = "Spitzenpegelerkennung"
I: [pulseaudio] source-output.c: application.name = "GNOME Volume Control Dialog"
I: [pulseaudio] source-output.c: native-protocol.peer = "UNIX socket client"
I: [pulseaudio] source-output.c: native-protocol.version = "29"
I: [pulseaudio] source-output.c: application.icon_name = "multimedia-volume-control"
I: [pulseaudio] source-output.c: application.version = "3.14.2"
I: [pulseaudio] source-output.c: application.process.id = "2304"
I: [pulseaudio] source-output.c: application.process.user = "stefan"
I: [pulseaudio] source-output.c: application.process.host = "rosa"
I: [pulseaudio] source-output.c: application.process.binary = "gnome-control-center"
I: [pulseaudio] source-output.c: application.language = "de_AT.utf8"
I: [pulseaudio] source-output.c: window.x11.display = ":0"
I: [pulseaudio] source-output.c: application.process.machine_id = "d1eaf6bfa0e7963ebd090de1537e54cd"
I: [pulseaudio] source-output.c: application.process.session_id = "1"
I: [pulseaudio] source-output.c: module-stream-restore.id = "source-output-by-application-id:org.gnome.VolumeControl"
I: [pulseaudio] protocol-native.c: Final latency 60,00 ms = 40,00 ms + 20,00 ms
I: [pulseaudio] source-output.c: Freeing output 0 "Spitzenpegelerkennung"
I: [pulseaudio] client.c: Freed 3 "GNOME Volume Control Dialog"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] main.c: Signal SIGINT empfangen.
I: [pulseaudio] main.c: Wird beendet.
I: [pulseaudio] main.c: Herunterfahren des Daemon gestartet.
I: [pulseaudio] module.c: Unloading "module-filter-apply" (index: #23).
I: [pulseaudio] module.c: Unloaded "module-filter-apply" (index: #23).
I: [pulseaudio] module.c: Unloading "module-filter-heuristics" (index: #22).
I: [pulseaudio] module.c: Unloaded "module-filter-heuristics" (index: #22).
I: [pulseaudio] module.c: Unloading "module-role-cork" (index: #21).
I: [pulseaudio] module.c: Unloaded "module-role-cork" (index: #21).
I: [pulseaudio] module.c: Unloading "module-position-event-sounds" (index: #20).
I: [pulseaudio] module.c: Unloaded "module-position-event-sounds" (index: #20).
I: [pulseaudio] module.c: Unloading "module-systemd-login" (index: #19).
I: [pulseaudio] client.c: Freed 0 "Login Session 1"
I: [pulseaudio] module.c: Unloaded "module-systemd-login" (index: #19).
I: [pulseaudio] module.c: Unloading "module-console-kit" (index: #18).
I: [pulseaudio] module.c: Unloaded "module-console-kit" (index: #18).
I: [pulseaudio] module.c: Unloading "module-suspend-on-idle" (index: #17).
I: [pulseaudio] module.c: Unloaded "module-suspend-on-idle" (index: #17).
I: [pulseaudio] module.c: Unloading "module-intended-roles" (index: #16).
I: [pulseaudio] module.c: Unloaded "module-intended-roles" (index: #16).
I: [pulseaudio] module.c: Unloading "module-always-sink" (index: #15).
I: [pulseaudio] module.c: Unloaded "module-always-sink" (index: #15).
I: [pulseaudio] module.c: Unloading "module-rescue-streams" (index: #14).
I: [pulseaudio] module.c: Unloaded "module-rescue-streams" (index: #14).
I: [pulseaudio] module.c: Unloading "module-default-device-restore" (index: #13).
I: [pulseaudio] module.c: Unloaded "module-default-device-restore" (index: #13).
I: [pulseaudio] module.c: Unloading "module-gconf" (index: #12).
I: [pulseaudio] module.c: Unloaded "module-gconf" (index: #12).
I: [pulseaudio] module.c: Unloading "module-native-protocol-unix" (index: #11).
I: [pulseaudio] client.c: Freed 1 "GNOME Volume Control Media Keys"
I: [pulseaudio] client.c: Freed 2 "GNOME Shell Volume Control"
I: [pulseaudio] module.c: Unloaded "module-native-protocol-unix" (index: #11).
I: [pulseaudio] module.c: Unloading "module-bluez4-discover" (index: #10).
I: [pulseaudio] module.c: Unloaded "module-bluez4-discover" (index: #10).
I: [pulseaudio] module.c: Unloading "module-bluez5-discover" (index: #9).
I: [pulseaudio] module.c: Unloaded "module-bluez5-discover" (index: #9).
I: [pulseaudio] module.c: Unloading "module-bluetooth-discover" (index: #8).
I: [pulseaudio] module.c: Unloaded "module-bluetooth-discover" (index: #8).
I: [pulseaudio] module.c: Unloading "module-bluetooth-policy" (index: #7).
I: [pulseaudio] module.c: Unloaded "module-bluetooth-policy" (index: #7).
I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #6).
I: [pulseaudio] sink.c: Freeing sink 0 "alsa_output.pci-0000_00_1b.0.analog-stereo"
I: [pulseaudio] source.c: Freeing source 0 "alsa_output.pci-0000_00_1b.0.analog-stereo.monitor"
I: [pulseaudio] source.c: Freeing source 1 "alsa_input.pci-0000_00_1b.0.analog-stereo"
I: [pulseaudio] card.c: Freed 0 "alsa_card.pci-0000_00_1b.0"
I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #6).
I: [pulseaudio] module.c: Unloading "module-udev-detect" (index: #5).
I: [pulseaudio] module.c: Unloaded "module-udev-detect" (index: #5).
I: [pulseaudio] module.c: Unloading "module-switch-on-port-available" (index: #4).
I: [pulseaudio] module.c: Unloaded "module-switch-on-port-available" (index: #4).
I: [pulseaudio] module.c: Unloading "module-augment-properties" (index: #3).
I: [pulseaudio] module.c: Unloaded "module-augment-properties" (index: #3).
I: [pulseaudio] module.c: Unloading "module-card-restore" (index: #2).
I: [pulseaudio] module.c: Unloaded "module-card-restore" (index: #2).
I: [pulseaudio] module.c: Unloading "module-stream-restore" (index: #1).
I: [pulseaudio] module.c: Unloaded "module-stream-restore" (index: #1).
I: [pulseaudio] module.c: Unloading "module-device-restore" (index: #0).
I: [pulseaudio] module.c: Unloaded "module-device-restore" (index: #0).
I: [pulseaudio] main.c: Daemon beendet.
-------------- next part --------------
I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) fehlgeschlagen: Die Operation ist nicht erlaubt
I: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) fehlgeschlagen: Die Operation ist nicht erlaubt
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: Dies ist PulseAudio 5.0
I: [pulseaudio] main.c: Seitengröße ist 4096 Bytes.
I: [pulseaudio] main.c: System- ID ist d1eaf6bfa0e7963ebd090de1537e54cd.
I: [pulseaudio] main.c: System- ID ist 1.
I: [pulseaudio] main.c: Nutze Laufzeit-Verzeichnis /run/user/1000/pulse.
I: [pulseaudio] main.c: Nutze Zustands-Verzeichnis /home/stefan/.pulse.
I: [pulseaudio] main.c: Modul-Verzeichnis /usr/lib/pulse-5.0/modules benutzen.
I: [pulseaudio] main.c: Laufe im System-Modus: no
I: [pulseaudio] main.c: Neue hochauslösende Timer verfügbar! Guten Appetit!
I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2
I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/stefan/.pulse/d1eaf6bfa0e7963ebd090de1537e54cd-device-volumes'.
I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/stefan/.pulse/d1eaf6bfa0e7963ebd090de1537e54cd-stream-volumes'.
I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/stefan/.pulse/d1eaf6bfa0e7963ebd090de1537e54cd-card-database'.
I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HDA Intel PCH/HDA Intel PCH.conf
I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HDA Intel PCH
I: [pulseaudio] (alsa-lib)main.c: error: failed to import HDA Intel PCH use case configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card HDA Intel PCH
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:0: Das Argument ist ungültig
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: Datei oder Verzeichnis nicht gefunden
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: Datei oder Verzeichnis nicht gefunden
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:0: Das Argument ist ungültig
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: Datei oder Verzeichnis nicht gefunden
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround40:0: Das Argument ist ungültig
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround41:0: Das Argument ist ungültig
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround50:0: Das Argument ist ungültig
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround51:0: Das Argument ist ungültig
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround71:0: Das Argument ist ungültig
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: Datei oder Verzeichnis nicht gefunden
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: Datei oder Verzeichnis nicht gefunden
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: Datei oder Verzeichnis nicht gefunden
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:0
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:0: Datei oder Verzeichnis nicht gefunden
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0: Datei oder Verzeichnis nicht gefunden
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0: Datei oder Verzeichnis nicht gefunden
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D7p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,1: Datei oder Verzeichnis nicht gefunden
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D7p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,1: Datei oder Verzeichnis nicht gefunden
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D8p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,2: Datei oder Verzeichnis nicht gefunden
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D8p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,2: Datei oder Verzeichnis nicht gefunden
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D9p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,3: Datei oder Verzeichnis nicht gefunden
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D9p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,3: Datei oder Verzeichnis nicht gefunden
I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_00_1b.0.
I: [pulseaudio] card.c: Created 0 "alsa_card.pci-0000_00_1b.0"
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
I: [pulseaudio] alsa-sink.c: Successfully opened device front:0.
I: [pulseaudio] alsa-sink.c: Selected mapping 'Analog Stereo' (analog-stereo).
I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: Datei oder Verzeichnis nicht gefunden
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] module-device-restore.c: Restoring port for sink sink:alsa_output.pci-0000_00_1b.0.analog-stereo.
I: [pulseaudio] module-device-restore.c: Restoring volume for sink alsa_output.pci-0000_00_1b.0.analog-stereo: front-left: 59910 / 91%, front-right: 59910 / 91%
I: [pulseaudio] module-device-restore.c: Restoring mute state for sink alsa_output.pci-0000_00_1b.0.analog-stereo.
I: [pulseaudio] sink.c: Created sink 0 "alsa_output.pci-0000_00_1b.0.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
I: [pulseaudio] sink.c: device.api = "alsa"
I: [pulseaudio] sink.c: device.class = "sound"
I: [pulseaudio] sink.c: alsa.class = "generic"
I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
I: [pulseaudio] sink.c: alsa.name = "92HD99BXX Analog"
I: [pulseaudio] sink.c: alsa.id = "92HD99BXX Analog"
I: [pulseaudio] sink.c: alsa.subdevice = "0"
I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] sink.c: alsa.device = "0"
I: [pulseaudio] sink.c: alsa.card = "0"
I: [pulseaudio] sink.c: alsa.card_name = "HDA Intel PCH"
I: [pulseaudio] sink.c: alsa.long_card_name = "HDA Intel PCH at 0xc2700000 irq 34"
I: [pulseaudio] sink.c: alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] sink.c: device.bus_path = "pci-0000:00:1b.0"
I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
I: [pulseaudio] sink.c: device.bus = "pci"
I: [pulseaudio] sink.c: device.vendor.id = "8086"
I: [pulseaudio] sink.c: device.vendor.name = "Intel Corporation"
I: [pulseaudio] sink.c: device.product.id = "1c20"
I: [pulseaudio] sink.c: device.product.name = "6 Series/C200 Series Chipset Family High Definition Audio Controller"
I: [pulseaudio] sink.c: device.form_factor = "internal"
I: [pulseaudio] sink.c: device.string = "front:0"
I: [pulseaudio] sink.c: device.buffering.buffer_size = "65536"
I: [pulseaudio] sink.c: device.buffering.fragment_size = "32768"
I: [pulseaudio] sink.c: device.access_mode = "mmap+timer"
I: [pulseaudio] sink.c: device.profile.name = "analog-stereo"
I: [pulseaudio] sink.c: device.profile.description = "Analog Stereo"
I: [pulseaudio] sink.c: device.description = "Internes Audio Analog Stereo"
I: [pulseaudio] sink.c: alsa.mixer_name = "Intel CougarPoint HDMI"
I: [pulseaudio] sink.c: alsa.components = "HDA:111d76e5,103c1899,00100102 HDA:80862805,80860101,00100000"
I: [pulseaudio] sink.c: module-udev-detect.discovered = "1"
I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] source.c: Created source 0 "alsa_output.pci-0000_00_1b.0.analog-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c: device.description = "Monitor of Internes Audio Analog Stereo"
I: [pulseaudio] source.c: device.class = "monitor"
I: [pulseaudio] source.c: alsa.card = "0"
I: [pulseaudio] source.c: alsa.card_name = "HDA Intel PCH"
I: [pulseaudio] source.c: alsa.long_card_name = "HDA Intel PCH at 0xc2700000 irq 34"
I: [pulseaudio] source.c: alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] source.c: device.bus_path = "pci-0000:00:1b.0"
I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
I: [pulseaudio] source.c: device.bus = "pci"
I: [pulseaudio] source.c: device.vendor.id = "8086"
I: [pulseaudio] source.c: device.vendor.name = "Intel Corporation"
I: [pulseaudio] source.c: device.product.id = "1c20"
I: [pulseaudio] source.c: device.product.name = "6 Series/C200 Series Chipset Family High Definition Audio Controller"
I: [pulseaudio] source.c: device.form_factor = "internal"
I: [pulseaudio] source.c: device.string = "0"
I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] alsa-sink.c: Using 2,0 fragments of size 32768 bytes (185,76ms), buffer size is 65536 bytes (371,52ms)
I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20,00ms
I: [pulseaudio] alsa-sink.c: Successfully enabled deferred volume.
I: [pulseaudio] alsa-sink.c: Hardware volume ranges from -200050,98 dB to 0,00 dB.
I: [pulseaudio] alsa-sink.c: Fixing base volume to 0,00 dB
I: [pulseaudio] alsa-sink.c: Using hardware volume control. Hardware dB scale supported.
I: [pulseaudio] alsa-sink.c: Using hardware mute control.
I: [alsa-sink-92HD99BXX Analog] core-util.c: Clamping rlimit-rttime to 200000 for RealtimeKit
I: [alsa-sink-92HD99BXX Analog] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-sink-92HD99BXX Analog] alsa-sink.c: Starting playback.
I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
I: [pulseaudio] alsa-source.c: Successfully opened device front:0.
I: [pulseaudio] alsa-source.c: Selected mapping 'Analog Stereo' (analog-stereo).
I: [pulseaudio] alsa-source.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-source.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: Datei oder Verzeichnis nicht gefunden
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] module-device-restore.c: Restoring port for source source:alsa_input.pci-0000_00_1b.0.analog-stereo.
I: [pulseaudio] module-device-restore.c: Restoring volume for source alsa_input.pci-0000_00_1b.0.analog-stereo: front-left: 18472 / 28%, front-right: 18472 / 28%
I: [pulseaudio] source.c: Created source 1 "alsa_input.pci-0000_00_1b.0.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c: alsa.resolution_bits = "16"
I: [pulseaudio] source.c: device.api = "alsa"
I: [pulseaudio] source.c: device.class = "sound"
I: [pulseaudio] source.c: alsa.class = "generic"
I: [pulseaudio] source.c: alsa.subclass = "generic-mix"
I: [pulseaudio] source.c: alsa.name = "92HD99BXX Analog"
I: [pulseaudio] source.c: alsa.id = "92HD99BXX Analog"
I: [pulseaudio] source.c: alsa.subdevice = "0"
I: [pulseaudio] source.c: alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] source.c: alsa.device = "0"
I: [pulseaudio] source.c: alsa.card = "0"
I: [pulseaudio] source.c: alsa.card_name = "HDA Intel PCH"
I: [pulseaudio] source.c: alsa.long_card_name = "HDA Intel PCH at 0xc2700000 irq 34"
I: [pulseaudio] source.c: alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] source.c: device.bus_path = "pci-0000:00:1b.0"
I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
I: [pulseaudio] source.c: device.bus = "pci"
I: [pulseaudio] source.c: device.vendor.id = "8086"
I: [pulseaudio] source.c: device.vendor.name = "Intel Corporation"
I: [pulseaudio] source.c: device.product.id = "1c20"
I: [pulseaudio] source.c: device.product.name = "6 Series/C200 Series Chipset Family High Definition Audio Controller"
I: [pulseaudio] source.c: device.form_factor = "internal"
I: [pulseaudio] source.c: device.string = "front:0"
I: [pulseaudio] source.c: device.buffering.buffer_size = "65536"
I: [pulseaudio] source.c: device.buffering.fragment_size = "32768"
I: [pulseaudio] source.c: device.access_mode = "mmap+timer"
I: [pulseaudio] source.c: device.profile.name = "analog-stereo"
I: [pulseaudio] source.c: device.profile.description = "Analog Stereo"
I: [pulseaudio] source.c: device.description = "Internes Audio Analog Stereo"
I: [pulseaudio] source.c: alsa.mixer_name = "Intel CougarPoint HDMI"
I: [pulseaudio] source.c: alsa.components = "HDA:111d76e5,103c1899,00100102 HDA:80862805,80860101,00100000"
I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] alsa-source.c: Using 2,0 fragments of size 32768 bytes (185,76ms), buffer size is 65536 bytes (371,52ms)
I: [pulseaudio] alsa-source.c: Time scheduling watermark is 20,00ms
I: [pulseaudio] alsa-source.c: Successfully enabled deferred volume.
I: [pulseaudio] alsa-source.c: Hardware volume ranges from -16,00 dB to 60,00 dB.
I: [pulseaudio] alsa-source.c: Fixing base volume to -60,00 dB
I: [pulseaudio] alsa-source.c: Using hardware volume control. Hardware dB scale supported.
I: [pulseaudio] alsa-source.c: Using hardware mute control.
I: [alsa-source-92HD99BXX Analog] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-source-92HD99BXX Analog] alsa-source.c: Starting capture.
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #6; argument: "device_id="0" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:1b.0/sound/card0 (alsa_card.pci-0000_00_1b.0) module loaded.
I: [pulseaudio] module-udev-detect.c: Found 1 cards.
I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "").
I: [pulseaudio] module.c: Loaded "module-bluetooth-policy" (index: #7; argument: "").
I: [pulseaudio] module.c: Loaded "module-bluez5-discover" (index: #9; argument: "").
I: [pulseaudio] module.c: Loaded "module-bluez4-discover" (index: #10; argument: "").
I: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #8; argument: "").
I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #11; argument: "").
I: [pulseaudio] module.c: Loaded "module-gconf" (index: #12; argument: "").
I: [pulseaudio] module-default-device-restore.c: Restored default sink 'alsa_output.pci-0000_00_1b.0.analog-stereo'.
I: [pulseaudio] module-default-device-restore.c: Restored default source 'alsa_input.pci-0000_00_1b.0.analog-stereo'.
I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #13; argument: "").
I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #14; argument: "").
I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #15; argument: "").
I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #16; argument: "").
I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #17; argument: "").
I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #18; argument: "").
I: [pulseaudio] client.c: Created 0 "Login Session 1"
I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #19; argument: "").
I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #20; argument: "").
I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #21; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #22; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #23; argument: "").
I: [pulseaudio] main.c: Start des Daemons abgeschlossen.
I: [pulseaudio] client.c: Created 1 "Native client (UNIX socket client)"
E: [pulseaudio] bluez4-util.c: org.bluez.Manager.GetProperties() failed: org.freedesktop.DBus.Error.UnknownMethod: Method "GetProperties" with signature "" on interface "org.bluez.Manager" doesn't exist
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
I: [pulseaudio] client.c: Created 2 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
I: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_1b.0.analog-stereo idle for too long, suspending ...
I: [alsa-source-92HD99BXX Analog] alsa-source.c: Device suspended...
I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo idle for too long, suspending ...
I: [alsa-sink-92HD99BXX Analog] alsa-sink.c: Device suspended...
I: [pulseaudio] client.c: Created 3 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
I: [pulseaudio] source-output.c: Trying to change sample rate
I: [alsa-source-92HD99BXX Analog] alsa-source.c: Trying resume...
I: [alsa-source-92HD99BXX Analog] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
I: [alsa-source-92HD99BXX Analog] alsa-util.c: ALSA period wakeups disabled
I: [alsa-source-92HD99BXX Analog] alsa-source.c: Time scheduling watermark is 20,00ms
I: [alsa-source-92HD99BXX Analog] alsa-source.c: Resumed successfully...
I: [alsa-source-92HD99BXX Analog] alsa-source.c: Starting capture.
I: [pulseaudio] remap.c: Using generic matrix remapping
I: [pulseaudio] source-output.c: Created output 0 "Spitzenpegelerkennung" on alsa_input.pci-0000_00_1b.0.analog-stereo with sample spec float32le 1ch 25Hz and channel map mono
I: [pulseaudio] source-output.c: application.id = "org.gnome.VolumeControl"
I: [pulseaudio] source-output.c: media.name = "Spitzenpegelerkennung"
I: [pulseaudio] source-output.c: application.name = "GNOME Volume Control Dialog"
I: [pulseaudio] source-output.c: native-protocol.peer = "UNIX socket client"
I: [pulseaudio] source-output.c: native-protocol.version = "29"
I: [pulseaudio] source-output.c: application.icon_name = "multimedia-volume-control"
I: [pulseaudio] source-output.c: application.version = "3.14.2"
I: [pulseaudio] source-output.c: application.process.id = "2645"
I: [pulseaudio] source-output.c: application.process.user = "stefan"
I: [pulseaudio] source-output.c: application.process.host = "rosa"
I: [pulseaudio] source-output.c: application.process.binary = "gnome-control-center"
I: [pulseaudio] source-output.c: application.language = "de_AT.utf8"
I: [pulseaudio] source-output.c: window.x11.display = ":0"
I: [pulseaudio] source-output.c: application.process.machine_id = "d1eaf6bfa0e7963ebd090de1537e54cd"
I: [pulseaudio] source-output.c: application.process.session_id = "1"
I: [pulseaudio] source-output.c: module-stream-restore.id = "source-output-by-application-id:org.gnome.VolumeControl"
I: [pulseaudio] protocol-native.c: Final latency 60,00 ms = 40,00 ms + 20,00 ms
I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card bluez_card.00_02_3C_49_93_08.
I: [pulseaudio] card.c: Created 1 "bluez_card.00_02_3C_49_93_08"
I: [pulseaudio] module-bluez5-device.c: Transport /org/bluez/hci0/dev_00_02_3C_49_93_08/fd3 acquired: fd 35
I: [pulseaudio] module-bluez5-device.c: SBC parameters: allocation=0, subbands=1, blocks=3, bitpool=53
I: [pulseaudio] sink.c: Created sink 1 "bluez_sink.00_02_3C_49_93_08" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink.c: bluetooth.protocol = "a2dp_sink"
I: [pulseaudio] sink.c: device.description = "Creative T30 Wireless"
I: [pulseaudio] sink.c: device.string = "00:02:3C:49:93:08"
I: [pulseaudio] sink.c: device.api = "bluez"
I: [pulseaudio] sink.c: device.class = "sound"
I: [pulseaudio] sink.c: device.bus = "bluetooth"
I: [pulseaudio] sink.c: device.form_factor = "speaker"
I: [pulseaudio] sink.c: bluez.path = "/org/bluez/hci0/dev_00_02_3C_49_93_08"
I: [pulseaudio] sink.c: bluez.class = "0x240414"
I: [pulseaudio] sink.c: bluez.alias = "Creative T30 Wireless"
I: [pulseaudio] sink.c: device.icon_name = "audio-speakers-bluetooth"
I: [pulseaudio] source.c: Created source 2 "bluez_sink.00_02_3C_49_93_08.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c: device.description = "Monitor of Creative T30 Wireless"
I: [pulseaudio] source.c: device.class = "monitor"
I: [pulseaudio] source.c: device.string = "00:02:3C:49:93:08"
I: [pulseaudio] source.c: device.api = "bluez"
I: [pulseaudio] source.c: device.bus = "bluetooth"
I: [pulseaudio] source.c: device.form_factor = "speaker"
I: [pulseaudio] source.c: bluez.path = "/org/bluez/hci0/dev_00_02_3C_49_93_08"
I: [pulseaudio] source.c: bluez.class = "0x240414"
I: [pulseaudio] source.c: bluez.alias = "Creative T30 Wireless"
I: [pulseaudio] source.c: device.icon_name = "audio-speakers-bluetooth"
I: [bluetooth] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [bluetooth] module-bluez5-device.c: Transport /org/bluez/hci0/dev_00_02_3C_49_93_08/fd3 resuming
I: [pulseaudio] module.c: Loaded "module-bluez5-device" (index: #24; argument: "path=/org/bluez/hci0/dev_00_02_3C_49_93_08").
I: [pulseaudio] module-suspend-on-idle.c: Sink bluez_sink.00_02_3C_49_93_08 idle for too long, suspending ...
I: [bluetooth] bluez5-util.c: Transport /org/bluez/hci0/dev_00_02_3C_49_93_08/fd3 released
I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:bluez_sink.00_02_3C_49_93_08:speaker-output.
I: [pulseaudio] client.c: Created 4 "Native client (UNIX socket client)"
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
I: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-media-role:event.
I: [pulseaudio] module-stream-restore.c: Restoring volume for sink input sink-input-by-media-role:event.
I: [pulseaudio] module-stream-restore.c: Restoring mute state for sink input sink-input-by-media-role:event.
I: [bluetooth] module-bluez5-device.c: Transport /org/bluez/hci0/dev_00_02_3C_49_93_08/fd3 acquired: fd 40
I: [bluetooth] module-bluez5-device.c: Transport /org/bluez/hci0/dev_00_02_3C_49_93_08/fd3 resuming
I: [pulseaudio] sink-input.c: Created input 0 "audio-volume-change" on bluez_sink.00_02_3C_49_93_08 with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink-input.c: application.id = "org.gnome.VolumeControl"
I: [pulseaudio] sink-input.c: event.description = "foobar event happened"
I: [pulseaudio] sink-input.c: event.id = "audio-volume-change"
I: [pulseaudio] sink-input.c: window.vpos = "0.496"
I: [pulseaudio] sink-input.c: window.hpos = "0.499"
I: [pulseaudio] sink-input.c: window.height = "620"
I: [pulseaudio] sink-input.c: window.width = "792"
I: [pulseaudio] sink-input.c: window.y = "71"
I: [pulseaudio] sink-input.c: window.x = "286"
I: [pulseaudio] sink-input.c: window.x11.monitor = "0"
I: [pulseaudio] sink-input.c: window.x11.screen = "0"
I: [pulseaudio] sink-input.c: window.desktop = "2"
I: [pulseaudio] sink-input.c: window.x11.display = ":0"
I: [pulseaudio] sink-input.c: window.x11.xid = "39845904"
I: [pulseaudio] sink-input.c: window.icon_name = "multimedia-volume-control"
I: [pulseaudio] sink-input.c: window.id = "Audio#sound"
I: [pulseaudio] sink-input.c: window.name = "Audio"
I: [pulseaudio] sink-input.c: media.role = "event"
I: [pulseaudio] sink-input.c: media.name = "audio-volume-change"
I: [pulseaudio] sink-input.c: media.filename = "/usr/share//sounds/freedesktop/stereo/audio-volume-change.oga"
I: [pulseaudio] sink-input.c: application.name = "Settings"
I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
I: [pulseaudio] sink-input.c: native-protocol.version = "29"
I: [pulseaudio] sink-input.c: application.icon_name = "multimedia-volume-control"
I: [pulseaudio] sink-input.c: application.process.id = "2645"
I: [pulseaudio] sink-input.c: application.process.user = "stefan"
I: [pulseaudio] sink-input.c: application.process.host = "rosa"
I: [pulseaudio] sink-input.c: application.process.binary = "gnome-control-center"
I: [pulseaudio] sink-input.c: application.language = "de_AT.utf8"
I: [pulseaudio] sink-input.c: application.process.machine_id = "d1eaf6bfa0e7963ebd090de1537e54cd"
I: [pulseaudio] sink-input.c: application.process.session_id = "1"
I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-media-role:event"
I: [pulseaudio] protocol-native.c: Requested tlength=2000,00 ms, minreq=20,00 ms
I: [pulseaudio] protocol-native.c: Final latency 2045,32 ms = 1960,00 ms + 2*20,00 ms + 45,32 ms
I: [pulseaudio] module-stream-restore.c: Storing volume/mute/device for stream sink-input-by-media-role:event.
I: [pulseaudio] sink-input.c: Freeing input 0 "audio-volume-change"
I: [pulseaudio] source-output.c: Freeing output 0 "Spitzenpegelerkennung"
I: [pulseaudio] client.c: Freed 3 "GNOME Volume Control Dialog"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] client.c: Freed 4 "Settings"
I: [pulseaudio] protocol-native.c: Connection died.
I: [pulseaudio] main.c: Signal SIGINT empfangen.
I: [pulseaudio] main.c: Wird beendet.
I: [pulseaudio] main.c: Herunterfahren des Daemon gestartet.
I: [pulseaudio] module.c: Unloading "module-bluez5-device" (index: #24).
I: [bluetooth] bluez5-util.c: Transport /org/bluez/hci0/dev_00_02_3C_49_93_08/fd3 released
I: [pulseaudio] sink.c: Freeing sink 1 "bluez_sink.00_02_3C_49_93_08"
I: [pulseaudio] source.c: Freeing source 2 "bluez_sink.00_02_3C_49_93_08.monitor"
I: [pulseaudio] card.c: Freed 1 "bluez_card.00_02_3C_49_93_08"
I: [pulseaudio] module.c: Unloaded "module-bluez5-device" (index: #24).
I: [pulseaudio] module.c: Unloading "module-filter-apply" (index: #23).
I: [pulseaudio] module.c: Unloaded "module-filter-apply" (index: #23).
I: [pulseaudio] module.c: Unloading "module-filter-heuristics" (index: #22).
I: [pulseaudio] module.c: Unloaded "module-filter-heuristics" (index: #22).
I: [pulseaudio] module.c: Unloading "module-role-cork" (index: #21).
I: [pulseaudio] module.c: Unloaded "module-role-cork" (index: #21).
I: [pulseaudio] module.c: Unloading "module-position-event-sounds" (index: #20).
I: [pulseaudio] module.c: Unloaded "module-position-event-sounds" (index: #20).
I: [pulseaudio] module.c: Unloading "module-systemd-login" (index: #19).
I: [pulseaudio] client.c: Freed 0 "Login Session 1"
I: [pulseaudio] module.c: Unloaded "module-systemd-login" (index: #19).
I: [pulseaudio] module.c: Unloading "module-console-kit" (index: #18).
I: [pulseaudio] module.c: Unloaded "module-console-kit" (index: #18).
I: [pulseaudio] module.c: Unloading "module-suspend-on-idle" (index: #17).
I: [pulseaudio] module.c: Unloaded "module-suspend-on-idle" (index: #17).
I: [pulseaudio] module.c: Unloading "module-intended-roles" (index: #16).
I: [pulseaudio] module.c: Unloaded "module-intended-roles" (index: #16).
I: [pulseaudio] module.c: Unloading "module-always-sink" (index: #15).
I: [pulseaudio] module.c: Unloaded "module-always-sink" (index: #15).
I: [pulseaudio] module.c: Unloading "module-rescue-streams" (index: #14).
I: [pulseaudio] module.c: Unloaded "module-rescue-streams" (index: #14).
I: [pulseaudio] module.c: Unloading "module-default-device-restore" (index: #13).
I: [pulseaudio] module.c: Unloaded "module-default-device-restore" (index: #13).
I: [pulseaudio] module.c: Unloading "module-gconf" (index: #12).
I: [pulseaudio] module.c: Unloaded "module-gconf" (index: #12).
I: [pulseaudio] module.c: Unloading "module-native-protocol-unix" (index: #11).
I: [pulseaudio] client.c: Freed 1 "GNOME Volume Control Media Keys"
I: [pulseaudio] client.c: Freed 2 "GNOME Shell Volume Control"
I: [pulseaudio] module.c: Unloaded "module-native-protocol-unix" (index: #11).
I: [pulseaudio] module.c: Unloading "module-bluez4-discover" (index: #10).
I: [pulseaudio] module.c: Unloaded "module-bluez4-discover" (index: #10).
I: [pulseaudio] module.c: Unloading "module-bluez5-discover" (index: #9).
I: [pulseaudio] module.c: Unloaded "module-bluez5-discover" (index: #9).
I: [pulseaudio] module.c: Unloading "module-bluetooth-discover" (index: #8).
I: [pulseaudio] module.c: Unloaded "module-bluetooth-discover" (index: #8).
I: [pulseaudio] module.c: Unloading "module-bluetooth-policy" (index: #7).
I: [pulseaudio] module.c: Unloaded "module-bluetooth-policy" (index: #7).
I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #6).
I: [pulseaudio] sink.c: Freeing sink 0 "alsa_output.pci-0000_00_1b.0.analog-stereo"
I: [pulseaudio] source.c: Freeing source 0 "alsa_output.pci-0000_00_1b.0.analog-stereo.monitor"
I: [pulseaudio] source.c: Freeing source 1 "alsa_input.pci-0000_00_1b.0.analog-stereo"
I: [pulseaudio] card.c: Freed 0 "alsa_card.pci-0000_00_1b.0"
I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #6).
I: [pulseaudio] module.c: Unloading "module-udev-detect" (index: #5).
I: [pulseaudio] module.c: Unloaded "module-udev-detect" (index: #5).
I: [pulseaudio] module.c: Unloading "module-switch-on-port-available" (index: #4).
I: [pulseaudio] module.c: Unloaded "module-switch-on-port-available" (index: #4).
I: [pulseaudio] module.c: Unloading "module-augment-properties" (index: #3).
I: [pulseaudio] module.c: Unloaded "module-augment-properties" (index: #3).
I: [pulseaudio] module.c: Unloading "module-card-restore" (index: #2).
I: [pulseaudio] module.c: Unloaded "module-card-restore" (index: #2).
I: [pulseaudio] module.c: Unloading "module-stream-restore" (index: #1).
I: [pulseaudio] module.c: Unloaded "module-stream-restore" (index: #1).
I: [pulseaudio] module.c: Unloading "module-device-restore" (index: #0).
I: [pulseaudio] module.c: Unloaded "module-device-restore" (index: #0).
I: [pulseaudio] main.c: Daemon beendet.
More information about the pkg-pulseaudio-devel
mailing list