Bug#830683: no sound anymore after upgrade to 9.0-1.1
Jonathan McCrohan
jmccrohan at gmail.com
Thu Jul 14 09:56:20 UTC 2016
Package: pulseaudio
Version: 9.0-1.1
Followup-For: Bug #830683
Hi,
I too experienced this bug this morning after upgrading to pulseaudio
9.0-1.1. Please consider upgrading the Recommends to a Depends as this
will cause a lot of pain for users upgrading from Jessie to Stretch,
once released.
If this is not possible, a NEWS.Debian notice would be useful.
Thanks,
Jon
-------------- next part --------------
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; default-sink =
; default-source =
; default-server =
; default-dbus-server =
; autospawn = yes
; daemon-binary = /usr/bin/pulseaudio
; extra-arguments = --log-target=syslog
; cookie-file =
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; auto-connect-localhost = no
; auto-connect-display = no
-------------- next part --------------
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; lock-memory = no
; cpu-limit = no
; high-priority = yes
; nice-level = -11
; realtime-scheduling = yes
; realtime-priority = 5
; exit-idle-time = 20
; scache-idle-time = 20
; dl-search-path = (depends on architecture)
; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa
log-target = syslog
log-level = debug
; log-meta = no
; log-time = no
; log-backtrace = 0
; resample-method = speex-float-1
; resample-method = src-sinc-medium-quality
; resample-method = speex-float-7
resample-method = src-sinc-best-quality
enable-remixing = yes
; enable-lfe-remixing = no
; lfe-crossover-freq = 0
flat-volumes = no
; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 200000
default-sample-format = s16le
default-sample-rate = 44100
;default-sample-format = s32le
alternate-sample-rate = 48000
; default-sample-channels = 2
default-sample-channels = 6
;default-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
; default-fragments = 4
; default-fragment-size-msec = 25
; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0
-------------- next part --------------
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)
.nofail
### Load something into the sample cache
#load-sample-lazy x11-bell /usr/share/sounds/freedesktop/stereo/bell.oga
#load-sample-lazy pulse-hotplug /usr/share/sounds/freedesktop/stereo/device-added.oga
#load-sample-lazy pulse-coldplug /usr/share/sounds/freedesktop/stereo/device-added.oga
#load-sample-lazy pulse-access /usr/share/sounds/freedesktop/stereo/message.oga
.fail
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
#load-module module-udev-detect tsched=0
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev support)
load-module module-detect
.endif
### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif
### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif
.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish
### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv
### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor
### Load additional modules from GConf settings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists module-gconf.so
.nofail
load-module module-gconf
.fail
.endif
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Honour intended role device property
load-module module-intended-roles
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle timeout=1800
### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif
### Enable positioned event sounds
load-module module-position-event-sounds
### Cork music/video streams when a phone stream is active
load-module module-role-cork
### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply
# X11 modules should not be started from default.pa so that one daemon
# can be shared by multiple sessions.
### Load X11 bell module
#load-module module-x11-bell sample=x11-bell
### Register ourselves in the X11 session manager
#load-module module-x11-xsmp
### Publish connection data in the X11 root window
#.ifexists module-x11-publish.so
#.nofail
#load-module module-x11-publish
#.fail
#.endif
### Make some devices default
#set-default-sink output
#set-default-source input
#
load-module module-remap-sink sink_name=speakers sink_properties=device.description="Speakers" remix=no master=alsa_output.pci-0000_05_00.0.analog-surround-71 channels=6 master_channel_map=front-left,front-right,rear-left,rear-right,front-center,lfe channel_map=front-left,front-right,rear-left,rear-right,front-center,lfe
load-module module-remap-sink sink_name=headphones sink_properties=device.description="Headphones" remix=no master=alsa_output.pci-0000_05_00.0.analog-surround-71 channels=2 master_channel_map=side-left,side-right channel_map=front-left,front-right
set-default-sink speakers
-------------- next part --------------
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started in system
# mode.
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev/hal support)
load-module module-detect
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Automatically restore the volume of streams and devices
load-module module-stream-restore
load-module module-device-restore
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### Enable positioned event sounds
load-module module-position-event-sounds
-------------- next part --------------
default
Playback/recording through the PulseAudio sound server
null
Discard all samples (playback) or generate zero samples (capture)
hdmi:CARD=HDMI_1,DEV=0
HDA Intel HDMI, HDMI 0
HDMI Audio Output
hdmi:CARD=HDMI_1,DEV=1
HDA Intel HDMI, HDMI 1
HDMI Audio Output
hdmi:CARD=HDMI_1,DEV=2
HDA Intel HDMI, HDMI 2
HDMI Audio Output
dmix:CARD=HDMI_1,DEV=3
HDA Intel HDMI, HDMI 0
Direct sample mixing device
dmix:CARD=HDMI_1,DEV=7
HDA Intel HDMI, HDMI 1
Direct sample mixing device
dmix:CARD=HDMI_1,DEV=8
HDA Intel HDMI, HDMI 2
Direct sample mixing device
dsnoop:CARD=HDMI_1,DEV=3
HDA Intel HDMI, HDMI 0
Direct sample snooping device
dsnoop:CARD=HDMI_1,DEV=7
HDA Intel HDMI, HDMI 1
Direct sample snooping device
dsnoop:CARD=HDMI_1,DEV=8
HDA Intel HDMI, HDMI 2
Direct sample snooping device
hw:CARD=HDMI_1,DEV=3
HDA Intel HDMI, HDMI 0
Direct hardware device without any conversions
hw:CARD=HDMI_1,DEV=7
HDA Intel HDMI, HDMI 1
Direct hardware device without any conversions
hw:CARD=HDMI_1,DEV=8
HDA Intel HDMI, HDMI 2
Direct hardware device without any conversions
plughw:CARD=HDMI_1,DEV=3
HDA Intel HDMI, HDMI 0
Hardware device with all software conversions
plughw:CARD=HDMI_1,DEV=7
HDA Intel HDMI, HDMI 1
Hardware device with all software conversions
plughw:CARD=HDMI_1,DEV=8
HDA Intel HDMI, HDMI 2
Hardware device with all software conversions
hdmi:CARD=HDMI,DEV=0
HDA ATI HDMI, HDMI 0
HDMI Audio Output
dmix:CARD=HDMI,DEV=3
HDA ATI HDMI, HDMI 0
Direct sample mixing device
dsnoop:CARD=HDMI,DEV=3
HDA ATI HDMI, HDMI 0
Direct sample snooping device
hw:CARD=HDMI,DEV=3
HDA ATI HDMI, HDMI 0
Direct hardware device without any conversions
plughw:CARD=HDMI,DEV=3
HDA ATI HDMI, HDMI 0
Hardware device with all software conversions
sysdefault:CARD=XFi
Creative X-Fi, Front/WaveIn
Default Audio Device
front:CARD=XFi,DEV=0
Creative X-Fi, Front/WaveIn
Front speakers
rear:CARD=XFi,DEV=0
Creative X-Fi, Surround
Rear speakers
center_lfe:CARD=XFi,DEV=0
Creative X-Fi, Center/LFE
Center and Subwoofer speakers
side:CARD=XFi,DEV=0
Creative X-Fi, Side
Side speakers
surround21:CARD=XFi,DEV=0
Creative X-Fi, Front/WaveIn
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=XFi,DEV=0
Creative X-Fi, Front/WaveIn
4.0 Surround output to Front and Rear speakers
surround41:CARD=XFi,DEV=0
Creative X-Fi, Front/WaveIn
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=XFi,DEV=0
Creative X-Fi, Front/WaveIn
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=XFi,DEV=0
Creative X-Fi, Front/WaveIn
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=XFi,DEV=0
Creative X-Fi, Front/WaveIn
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=XFi,DEV=0
Creative X-Fi, IEC958 Non-audio
IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=XFi,DEV=0
Creative X-Fi, Front/WaveIn
Direct sample mixing device
dmix:CARD=XFi,DEV=1
Creative X-Fi, Surround
Direct sample mixing device
dmix:CARD=XFi,DEV=2
Creative X-Fi, Center/LFE
Direct sample mixing device
dmix:CARD=XFi,DEV=3
Creative X-Fi, Side
Direct sample mixing device
dmix:CARD=XFi,DEV=4
Creative X-Fi, IEC958 Non-audio
Direct sample mixing device
dsnoop:CARD=XFi,DEV=0
Creative X-Fi, Front/WaveIn
Direct sample snooping device
dsnoop:CARD=XFi,DEV=1
Creative X-Fi, Surround
Direct sample snooping device
dsnoop:CARD=XFi,DEV=2
Creative X-Fi, Center/LFE
Direct sample snooping device
dsnoop:CARD=XFi,DEV=3
Creative X-Fi, Side
Direct sample snooping device
dsnoop:CARD=XFi,DEV=4
Creative X-Fi, IEC958 Non-audio
Direct sample snooping device
hw:CARD=XFi,DEV=0
Creative X-Fi, Front/WaveIn
Direct hardware device without any conversions
hw:CARD=XFi,DEV=1
Creative X-Fi, Surround
Direct hardware device without any conversions
hw:CARD=XFi,DEV=2
Creative X-Fi, Center/LFE
Direct hardware device without any conversions
hw:CARD=XFi,DEV=3
Creative X-Fi, Side
Direct hardware device without any conversions
hw:CARD=XFi,DEV=4
Creative X-Fi, IEC958 Non-audio
Direct hardware device without any conversions
plughw:CARD=XFi,DEV=0
Creative X-Fi, Front/WaveIn
Hardware device with all software conversions
plughw:CARD=XFi,DEV=1
Creative X-Fi, Surround
Hardware device with all software conversions
plughw:CARD=XFi,DEV=2
Creative X-Fi, Center/LFE
Hardware device with all software conversions
plughw:CARD=XFi,DEV=3
Creative X-Fi, Side
Hardware device with all software conversions
plughw:CARD=XFi,DEV=4
Creative X-Fi, IEC958 Non-audio
Hardware device with all software conversions
-------------- next part --------------
Module #0
Name: module-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "9.0"
Module #1
Name: module-stream-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "9.0"
Module #2
Name: module-card-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "9.0"
Module #3
Name: module-augment-properties
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "9.0"
Module #4
Name: module-switch-on-port-available
Argument:
Usage counter: n/a
Properties:
Module #5
Name: module-udev-detect
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load matching drivers"
module.version = "9.0"
Module #6
Name: module-alsa-card
Argument: device_id="1" name="pci-0000_01_00.1" card_name="alsa_card.pci-0000_01_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "9.0"
Module #7
Name: module-alsa-card
Argument: device_id="0" name="pci-0000_00_03.0" card_name="alsa_card.pci-0000_00_03.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "9.0"
Module #8
Name: module-alsa-card
Argument: device_id="3" name="usb-046d_0808_FA747780-02" card_name="alsa_card.usb-046d_0808_FA747780-02" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "9.0"
Module #9
Name: module-alsa-card
Argument: device_id="2" name="pci-0000_05_00.0" card_name="alsa_card.pci-0000_05_00.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"
Usage counter: 2
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "9.0"
Module #10
Name: module-bluetooth-policy
Argument:
Usage counter: n/a
Properties:
module.author = "Fr?d?ric Dalleau"
module.description = "When a bluetooth sink or source is added, load module-loopback"
module.version = "9.0"
Module #11
Name: module-bluetooth-discover
Argument:
Usage counter: n/a
Properties:
module.author = "Jo?o Paulo Rechi Vita"
module.description = "Detect available Bluetooth daemon and load the corresponding discovery module"
module.version = "9.0"
Module #12
Name: module-bluez5-discover
Argument:
Usage counter: n/a
Properties:
module.author = "Jo?o Paulo Rechi Vita"
module.description = "Detect available BlueZ 5 Bluetooth audio devices and load BlueZ 5 Bluetooth audio drivers"
module.version = "9.0"
Module #13
Name: module-native-protocol-unix
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "9.0"
Module #14
Name: module-gconf
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "GConf Adapter"
module.version = "9.0"
Module #15
Name: module-default-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink and source"
module.version = "9.0"
Module #16
Name: module-rescue-streams
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to move its streams to the default sink/source"
module.version = "9.0"
Module #17
Name: module-always-sink
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Always keeps at least one sink loaded even if it's a null one"
module.version = "9.0"
Module #18
Name: module-intended-roles
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based on intended roles of devices"
module.version = "9.0"
Module #19
Name: module-suspend-on-idle
Argument: timeout=1800
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long, suspend it"
module.version = "9.0"
Module #20
Name: module-console-kit
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each ConsoleKit session of this user"
module.version = "9.0"
Module #21
Name: module-systemd-login
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of this user"
module.version = "9.0"
Module #22
Name: module-position-event-sounds
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
module.version = "9.0"
Module #23
Name: module-role-cork
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles while others exist"
module.version = "9.0"
Module #24
Name: module-filter-heuristics
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "9.0"
Module #25
Name: module-filter-apply
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when needed"
module.version = "9.0"
Module #26
Name: module-remap-sink
Argument: sink_name=speakers sink_properties=device.description="Speakers" remix=no master=alsa_output.pci-0000_05_00.0.analog-surround-71 channels=6 master_channel_map=front-left,front-right,rear-left,rear-right,front-center,lfe channel_map=front-left,front-right,rear-left,rear-right,front-center,lfe
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "Virtual channel remapping sink"
module.version = "9.0"
Module #27
Name: module-remap-sink
Argument: sink_name=headphones sink_properties=device.description="Headphones" remix=no master=alsa_output.pci-0000_05_00.0.analog-surround-71 channels=2 master_channel_map=side-left,side-right channel_map=front-left,front-right
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "Virtual channel remapping sink"
module.version = "9.0"
Module #28
Name: module-cli-protocol-unix
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Command line interface protocol (UNIX sockets)"
module.version = "9.0"
Sink #0
State: RUNNING
Name: alsa_output.pci-0000_05_00.0.analog-surround-71
Description: EMU20k2 [X-Fi Titanium Series] Analog Surround 7.1
Driver: module-alsa-card.c
Sample Specification: s16le 8ch 44100Hz
Channel Map: front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
Owner Module: 9
Mute: yes
Volume: front-left: 29486 / 45% / -20.81 dB, front-right: 29486 / 45% / -20.81 dB, rear-left: 29486 / 45% / -20.81 dB, rear-right: 29486 / 45% / -20.81 dB, front-center: 29486 / 45% / -20.81 dB, lfe: 29486 / 45% / -20.81 dB, side-left: 29486 / 45% / -20.81 dB, side-right: 29486 / 45% / -20.81 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_05_00.0.analog-surround-71.monitor
Latency: 185645 usec, configured 185759 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "Front/WaveIn"
alsa.id = "ctxfi"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "2"
alsa.card_name = "Creative X-Fi"
alsa.long_card_name = "Creative X-Fi 20K2 SB0880"
alsa.driver_name = "snd_ctxfi"
device.bus_path = "pci-0000:05:00.0"
sysfs.path = "/devices/pci0000:00/0000:00:1c.4/0000:05:00.0/sound/card2"
device.bus = "pci"
device.vendor.id = "1102"
device.vendor.name = "Creative Labs"
device.product.id = "000b"
device.product.name = "EMU20k2 [X-Fi Titanium Series]"
device.string = "surround71:2"
device.buffering.buffer_size = "131072"
device.buffering.fragment_size = "65536"
device.access_mode = "mmap+timer"
device.profile.name = "analog-surround-71"
device.profile.description = "Analog Surround 7.1"
device.description = "EMU20k2 [X-Fi Titanium Series] Analog Surround 7.1"
alsa.mixer_name = "20K2"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-output: Analog Output (priority: 9900)
Active Port: analog-output
Formats:
pcm
Sink #1
State: IDLE
Name: speakers
Description: Speakers
Driver: module-remap-sink.c
Sample Specification: s16le 6ch 44100Hz
Channel Map: front-left,front-right,rear-left,rear-right,front-center,lfe
Owner Module: 26
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB, rear-left: 65536 / 100% / 0.00 dB, rear-right: 65536 / 100% / 0.00 dB, front-center: 65536 / 100% / 0.00 dB, lfe: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: speakers.monitor
Latency: 185507 usec, configured 185759 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.master_device = "alsa_output.pci-0000_05_00.0.analog-surround-71"
device.class = "filter"
device.description = "Speakers"
device.icon_name = "audio-card"
Formats:
pcm
Sink #2
State: IDLE
Name: headphones
Description: Headphones
Driver: module-remap-sink.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 27
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: headphones.monitor
Latency: 185410 usec, configured 185759 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.master_device = "alsa_output.pci-0000_05_00.0.analog-surround-71"
device.class = "filter"
device.description = "Headphones"
device.icon_name = "audio-card"
Formats:
pcm
Source #0
State: IDLE
Name: alsa_input.usb-046d_0808_FA747780-02.analog-mono
Description: Webcam C600 Analog Mono
Driver: module-alsa-card.c
Sample Specification: s16le 1ch 48000Hz
Channel Map: mono
Owner Module: 8
Mute: no
Volume: mono: 21845 / 33% / -28.63 dB
balance 0.00
Base Volume: 19944 / 30% / -31.00 dB
Monitor of Sink: n/a
Latency: 837 usec, configured 2000000 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "3"
alsa.card_name = "USB Device 0x46d:0x808"
alsa.long_card_name = "USB Device 0x46d:0x808 at usb-0000:00:14.0-5.2, high speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:14.0-usb-0:5.2:1.2"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2:1.2/sound/card3"
udev.id = "usb-046d_0808_FA747780-02"
device.bus = "usb"
device.vendor.id = "046d"
device.vendor.name = "Logitech, Inc."
device.product.id = "0808"
device.product.name = "Webcam C600"
device.serial = "046d_0808_FA747780"
device.form_factor = "webcam"
device.string = "hw:3"
device.buffering.buffer_size = "192000"
device.buffering.fragment_size = "96000"
device.access_mode = "mmap+timer"
device.profile.name = "analog-mono"
device.profile.description = "Analog Mono"
device.description = "Webcam C600 Analog Mono"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB046d:0808"
module-udev-detect.discovered = "1"
device.icon_name = "camera-web-usb"
Ports:
analog-input-mic: Microphone (priority: 8700)
Active Port: analog-input-mic
Formats:
pcm
Source #1
State: IDLE
Name: alsa_output.pci-0000_05_00.0.analog-surround-71.monitor
Description: Monitor of EMU20k2 [X-Fi Titanium Series] Analog Surround 7.1
Driver: module-alsa-card.c
Sample Specification: s16le 8ch 44100Hz
Channel Map: front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
Owner Module: 9
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB, rear-left: 65536 / 100% / 0.00 dB, rear-right: 65536 / 100% / 0.00 dB, front-center: 65536 / 100% / 0.00 dB, lfe: 65536 / 100% / 0.00 dB, side-left: 65536 / 100% / 0.00 dB, side-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_05_00.0.analog-surround-71
Latency: 0 usec, configured 185759 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of EMU20k2 [X-Fi Titanium Series] Analog Surround 7.1"
device.class = "monitor"
alsa.card = "2"
alsa.card_name = "Creative X-Fi"
alsa.long_card_name = "Creative X-Fi 20K2 SB0880"
alsa.driver_name = "snd_ctxfi"
device.bus_path = "pci-0000:05:00.0"
sysfs.path = "/devices/pci0000:00/0000:00:1c.4/0000:05:00.0/sound/card2"
device.bus = "pci"
device.vendor.id = "1102"
device.vendor.name = "Creative Labs"
device.product.id = "000b"
device.product.name = "EMU20k2 [X-Fi Titanium Series]"
device.string = "2"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formats:
pcm
Source #2
State: IDLE
Name: speakers.monitor
Description: Monitor of Speakers
Driver: module-remap-sink.c
Sample Specification: s16le 6ch 44100Hz
Channel Map: front-left,front-right,rear-left,rear-right,front-center,lfe
Owner Module: 26
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB, rear-left: 65536 / 100% / 0.00 dB, rear-right: 65536 / 100% / 0.00 dB, front-center: 65536 / 100% / 0.00 dB, lfe: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: speakers
Latency: 0 usec, configured 185759 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Speakers"
device.class = "monitor"
device.icon_name = "audio-input-microphone"
Formats:
pcm
Source #3
State: IDLE
Name: headphones.monitor
Description: Monitor of Headphones
Driver: module-remap-sink.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 27
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: headphones
Latency: 0 usec, configured 185759 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Headphones"
device.class = "monitor"
device.icon_name = "audio-input-microphone"
Formats:
pcm
Sink Input #0
Driver: module-remap-sink.c
Owner Module: 26
Client: n/a
Sink: 0
Sample Specification: s16le 6ch 44100Hz
Channel Map: front-left,front-right,rear-left,rear-right,front-center,lfe
Format: pcm, format.sample_format = "\"s16le\"" format.rate = "44100" format.channels = "6" format.channel_map = "\"front-left,front-right,rear-left,rear-right,front-center,lfe\""
Corked: no
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB, rear-left: 65536 / 100% / 0.00 dB, rear-right: 65536 / 100% / 0.00 dB, front-center: 65536 / 100% / 0.00 dB, lfe: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 0 usec
Sink Latency: 185271 usec
Resample method: copy
Properties:
media.name = "Remapped Stream"
media.role = "filter"
module-stream-restore.id = "sink-input-by-media-role:filter"
Sink Input #1
Driver: module-remap-sink.c
Owner Module: 27
Client: n/a
Sink: 0
Sample Specification: s16le 2ch 44100Hz
Channel Map: side-left,side-right
Format: pcm, format.sample_format = "\"s16le\"" format.rate = "44100" format.channels = "2" format.channel_map = "\"side-left,side-right\""
Corked: no
Mute: no
Volume: side-left: 65536 / 100% / 0.00 dB, side-right: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 0 usec
Sink Latency: 185261 usec
Resample method: copy
Properties:
media.name = "Remapped Stream"
media.role = "filter"
module-stream-restore.id = "sink-input-by-media-role:filter"
Client #0
Driver: module-systemd-login.c
Owner Module: 21
Properties:
application.name = "Login Session 2"
systemd-login.session = "2"
Client #192
Driver: protocol-native.c
Owner Module: 13
Properties:
application.name = "pactl"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "31"
application.process.id = "21356"
application.process.user = "jmccrohan"
application.process.host = "lambda"
application.process.binary = "pactl"
application.language = "C"
window.x11.display = ":0"
application.process.machine_id = "dfa62ba64cf10acc9037234e0000000b"
application.process.session_id = "2"
Card #0
Name: alsa_card.pci-0000_01_00.1
Driver: module-alsa-card.c
Owner Module: 6
Properties:
alsa.card = "1"
alsa.card_name = "HDA ATI HDMI"
alsa.long_card_name = "HDA ATI HDMI at 0xf4840000 irq 33"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:01:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "aa58"
device.product.name = "Juniper HDMI Audio [Radeon HD 5700 Series]"
device.string = "1"
device.description = "Juniper HDMI Audio [Radeon HD 5700 Series]"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 400, available: yes)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 3300, available: yes)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (sinks: 1, sources: 0, priority: 300, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: off
Ports:
hdmi-output-0: HDMI / DisplayPort (priority: 5900, latency offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo, output:hdmi-surround, output:hdmi-surround71
Card #1
Name: alsa_card.pci-0000_00_03.0
Driver: module-alsa-card.c
Owner Module: 7
Properties:
alsa.card = "0"
alsa.card_name = "HDA Intel HDMI"
alsa.long_card_name = "HDA Intel HDMI at 0xf4930000 irq 35"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:03.0"
sysfs.path = "/devices/pci0000:00/0000:00:03.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0c0c"
device.product.name = "Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller"
device.form_factor = "internal"
device.string = "0"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 400, available: yes)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 3300, available: yes)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (sinks: 1, sources: 0, priority: 300, available: yes)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 200, available: yes)
output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 3100, available: yes)
output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 100, available: yes)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 200, available: yes)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 3100, available: yes)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 100, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: off
Ports:
hdmi-output-0: HDMI / DisplayPort (priority: 5900, latency offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo, output:hdmi-surround, output:hdmi-surround71
hdmi-output-1: HDMI / DisplayPort 2 (priority: 5800, latency offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-surround-extra1, output:hdmi-surround71-extra1
hdmi-output-2: HDMI / DisplayPort 3 (priority: 5700, latency offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2
Card #2
Name: alsa_card.usb-046d_0808_FA747780-02
Driver: module-alsa-card.c
Owner Module: 8
Properties:
alsa.card = "3"
alsa.card_name = "USB Device 0x46d:0x808"
alsa.long_card_name = "USB Device 0x46d:0x808 at usb-0000:00:14.0-5.2, high speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:14.0-usb-0:5.2:1.2"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2:1.2/sound/card3"
udev.id = "usb-046d_0808_FA747780-02"
device.bus = "usb"
device.vendor.id = "046d"
device.vendor.name = "Logitech, Inc."
device.product.id = "0808"
device.product.name = "Webcam C600"
device.serial = "046d_0808_FA747780"
device.form_factor = "webcam"
device.string = "3"
device.description = "Webcam C600"
module-udev-detect.discovered = "1"
device.icon_name = "camera-web-usb"
Profiles:
input:analog-mono: Analog Mono Input (sinks: 0, sources: 1, priority: 2, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: input:analog-mono
Ports:
analog-input-mic: Microphone (priority: 8700, latency offset: 0 usec)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-mono
Card #3
Name: alsa_card.pci-0000_05_00.0
Driver: module-alsa-card.c
Owner Module: 9
Properties:
alsa.card = "2"
alsa.card_name = "Creative X-Fi"
alsa.long_card_name = "Creative X-Fi 20K2 SB0880"
alsa.driver_name = "snd_ctxfi"
device.bus_path = "pci-0000:05:00.0"
sysfs.path = "/devices/pci0000:00/0000:00:1c.4/0000:05:00.0/sound/card2"
device.bus = "pci"
device.vendor.id = "1102"
device.vendor.name = "Creative Labs"
device.product.id = "000b"
device.product.name = "EMU20k2 [X-Fi Titanium Series]"
device.string = "2"
device.description = "EMU20k2 [X-Fi Titanium Series]"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
input:analog-mono: Analog Mono Input (sinks: 0, sources: 1, priority: 2, available: yes)
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 10, available: yes)
output:analog-mono: Analog Mono Output (sinks: 1, sources: 0, priority: 200, available: yes)
output:analog-mono+input:analog-mono: Analog Mono Duplex (sinks: 1, sources: 1, priority: 202, available: yes)
output:analog-mono+input:analog-stereo: Analog Mono Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 210, available: yes)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 1000, available: yes)
output:analog-stereo+input:analog-mono: Analog Stereo Output + Analog Mono Input (sinks: 1, sources: 1, priority: 1002, available: yes)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 1010, available: yes)
output:analog-surround-21: Analog Surround 2.1 Output (sinks: 1, sources: 0, priority: 800, available: yes)
output:analog-surround-21+input:analog-mono: Analog Surround 2.1 Output + Analog Mono Input (sinks: 1, sources: 1, priority: 802, available: yes)
output:analog-surround-21+input:analog-stereo: Analog Surround 2.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 810, available: yes)
output:analog-surround-40: Analog Surround 4.0 Output (sinks: 1, sources: 0, priority: 700, available: yes)
output:analog-surround-40+input:analog-mono: Analog Surround 4.0 Output + Analog Mono Input (sinks: 1, sources: 1, priority: 702, available: yes)
output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 710, available: yes)
output:analog-surround-41: Analog Surround 4.1 Output (sinks: 1, sources: 0, priority: 800, available: yes)
output:analog-surround-41+input:analog-mono: Analog Surround 4.1 Output + Analog Mono Input (sinks: 1, sources: 1, priority: 802, available: yes)
output:analog-surround-41+input:analog-stereo: Analog Surround 4.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 810, available: yes)
output:analog-surround-50: Analog Surround 5.0 Output (sinks: 1, sources: 0, priority: 700, available: yes)
output:analog-surround-50+input:analog-mono: Analog Surround 5.0 Output + Analog Mono Input (sinks: 1, sources: 1, priority: 702, available: yes)
output:analog-surround-50+input:analog-stereo: Analog Surround 5.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 710, available: yes)
output:analog-surround-51: Analog Surround 5.1 Output (sinks: 1, sources: 0, priority: 3800, available: yes)
output:analog-surround-51+input:analog-mono: Analog Surround 5.1 Output + Analog Mono Input (sinks: 1, sources: 1, priority: 3802, available: yes)
output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 3810, available: yes)
output:analog-surround-71: Analog Surround 7.1 Output (sinks: 1, sources: 0, priority: 700, available: yes)
output:analog-surround-71+input:analog-mono: Analog Surround 7.1 Output + Analog Mono Input (sinks: 1, sources: 1, priority: 702, available: yes)
output:analog-surround-71+input:analog-stereo: Analog Surround 7.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 710, available: yes)
output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 500, available: yes)
output:iec958-stereo+input:analog-mono: Digital Stereo (IEC958) Output + Analog Mono Input (sinks: 1, sources: 1, priority: 502, available: yes)
output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 510, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:analog-surround-71
Ports:
analog-input-mic: Microphone (priority: 8700, latency offset: 0 usec)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-mono, input:analog-stereo, output:analog-mono+input:analog-mono, output:analog-mono+input:analog-stereo, output:analog-stereo+input:analog-mono, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-mono, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-mono, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-mono, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-mono, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-mono, output:analog-surround-51+input:analog-stereo, output:analog-surround-71+input:analog-mono, output:analog-surround-71+input:analog-stereo, output:iec958-stereo+input:analog-mono, output:iec958-stereo+input:analog-stereo
analog-input-linein: Line In (priority: 8100, latency offset: 0 usec)
Part of profile(s): input:analog-mono, input:analog-stereo, output:analog-mono+input:analog-mono, output:analog-mono+input:analog-stereo, output:analog-stereo+input:analog-mono, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-mono, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-mono, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-mono, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-mono, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-mono, output:analog-surround-51+input:analog-stereo, output:analog-surround-71+input:analog-mono, output:analog-surround-71+input:analog-stereo, output:iec958-stereo+input:analog-mono, output:iec958-stereo+input:analog-stereo
analog-output: Analog Output (priority: 9900, latency offset: 0 usec)
Part of profile(s): output:analog-mono, output:analog-mono+input:analog-mono, output:analog-mono+input:analog-stereo, output:analog-stereo, output:analog-stereo+input:analog-mono, output:analog-stereo+input:analog-stereo, output:analog-surround-21, output:analog-surround-21+input:analog-mono, output:analog-surround-21+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+input:analog-mono, output:analog-surround-40+input:analog-stereo, output:analog-surround-41, output:analog-surround-41+input:analog-mono, output:analog-surround-41+input:analog-stereo, output:analog-surround-50, output:analog-surround-50+input:analog-mono, output:analog-surround-50+input:analog-stereo, output:analog-surround-51, output:analog-surround-51+input:analog-mono, output:analog-surround-51+input:analog-stereo, output:analog-surround-71, output:analog-surround-71+input:analog-mono, output:analog-surround-71+input:analog-stereo
iec958-stereo-output: Digital Output (S/PDIF) (priority: 0, latency offset: 0 usec)
Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-mono, output:iec958-stereo+input:analog-stereo
-------------- next part --------------
Server String: /run/user/1000/pulse/native
Library Protocol Version: 31
Server Protocol Version: 31
Is Local: yes
Client Index: 193
Tile Size: 65472
User Name: jmccrohan
Host Name: lambda
Server Name: pulseaudio
Server Version: 9.0
Default Sample Specification: s16le 6ch 44100Hz
Default Channel Map: front-left,front-left-of-center,front-center,front-right,front-right-of-center,rear-center
Default Sink: speakers
Default Source: alsa_input.usb-046d_0808_FA747780-02.analog-mono
Cookie: 94a7:c6f7
More information about the pkg-pulseaudio-devel
mailing list