Bug#831355: pulseaudio: Use module-udev-detect instead of module-detect

Francois Mescam francois at mescam.org
Thu Jul 14 20:18:28 UTC 2016


Package: pulseaudio
Version: 9.0-1.1
Severity: minor

Dear Maintainer,

In syslog I saw messages like this one :

pulseaudio[4977]: [pulseaudio] module.c: module-detect is deprecated: Please use
module-udev-detect instead of module-detect!

It's not urgent but this has to be corrected.

With my best regards

François

-- Package-specific info:
File '/etc/default/pulseaudio' does not exist


-- System Information:
Debian Release: stretch/sid
  APT prefers testing
  APT policy: (900, 'testing'), (800, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.6.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages pulseaudio depends on:
ii  adduser                      3.115
ii  libasound2                   1.1.1-2
ii  libasound2-plugins           1:1.1.1-dmo1
ii  libc6                        2.23-1
ii  libcap2                      1:2.25-1
ii  libdbus-1-3                  1.10.8-1
ii  libfftw3-single3             3.3.4-2+b1
ii  libgcc1                      1:6.1.1-9
ii  libice6                      2:1.0.9-1+b1
ii  libltdl7                     2.4.6-0.1
ii  liborc-0.4-0                 1:0.4.25-1
ii  libpulse0                    9.0-1.1
ii  libsm6                       2:1.2.2-1+b1
ii  libsndfile1                  1.0.25-10
ii  libsoxr0                     0.1.2-1
ii  libspeexdsp1                 1.2~rc1.2-1
ii  libstdc++6                   6.1.1-9
ii  libsystemd0                  230-5
ii  libtdb1                      1.3.9-1
ii  libudev1                     230-5
ii  libwebrtc-audio-processing1  0.3-1
ii  libx11-6                     2:1.6.3-1
ii  libx11-xcb1                  2:1.6.3-1
ii  libxcb1                      1.11.1-1
ii  libxtst6                     2:1.2.2-1+b1
ii  lsb-base                     9.20160629
ii  pulseaudio-utils             9.0-1.1

Versions of packages pulseaudio recommends:
pn  pulseaudio-module-udev  <none>
ii  pulseaudio-module-x11   9.0-1.1
ii  rtkit                   0.11-4

Versions of packages pulseaudio suggests:
pn  paman        <none>
pn  paprefs      <none>
ii  pavucontrol  3.0-3+b2
pn  pavumeter    <none>

-- no debconf information
-------------- next part --------------
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.

## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
## more information. Default values are commented out.  Use either ; or # for
## commenting.

; default-sink =
; default-source =
; default-server =
; default-dbus-server =

; autospawn = yes
; daemon-binary = /usr/bin/pulseaudio
; extra-arguments = --log-target=syslog

; cookie-file =

; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB

; auto-connect-localhost = no
; auto-connect-display = no
-------------- next part --------------
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.

## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out.  Use either ; or # for
## commenting.

; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; lock-memory = no
; cpu-limit = no

; high-priority = yes
; nice-level = -11

; realtime-scheduling = yes
; realtime-priority = 5

; exit-idle-time = 20
; scache-idle-time = 20

; dl-search-path = (depends on architecture)

; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa

; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0

; resample-method = speex-float-1
; enable-remixing = yes
; enable-lfe-remixing = no
; lfe-crossover-freq = 0

; flat-volumes = yes

; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 200000

; default-sample-format = s16le
; default-sample-rate = 44100
; alternate-sample-rate = 48000
; default-sample-channels = 2
; default-channel-map = front-left,front-right

; default-fragments = 4
; default-fragment-size-msec = 25

; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0
-------------- next part --------------
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.

# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)

.fail

### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore

### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties

### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available

### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink

### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev support)
load-module module-detect
.endif

### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif

### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif

.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif

### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix

### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish

### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv

### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor

### Load additional modules from GConf settings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists module-gconf.so
.nofail
load-module module-gconf
.fail
.endif

### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore

### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams

### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink

### Honour intended role device property
load-module module-intended-roles

### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle

### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif

### Enable positioned event sounds
load-module module-position-event-sounds

### Cork music/video streams when a phone stream is active
load-module module-role-cork

### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply

### Make some devices default
#set-default-sink output
#set-default-source input
-------------- next part --------------
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.

# This startup script is used only if PulseAudio is started in system
# mode.

### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev/hal support)
load-module module-detect
.endif

### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix

### Automatically restore the volume of streams and devices
load-module module-stream-restore
load-module module-device-restore

### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore

### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams

### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink

### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle

### Enable positioned event sounds
load-module module-position-event-sounds
-------------- next part --------------
default
    Playback/recording through the PulseAudio sound server
null
    Discard all samples (playback) or generate zero samples (capture)
hdmi:CARD=HDMI,DEV=0
    HDA Intel HDMI, HDMI 0
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=1
    HDA Intel HDMI, HDMI 1
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=2
    HDA Intel HDMI, HDMI 2
    HDMI Audio Output
dmix:CARD=HDMI,DEV=3
    HDA Intel HDMI, HDMI 0
    Direct sample mixing device
dmix:CARD=HDMI,DEV=7
    HDA Intel HDMI, HDMI 1
    Direct sample mixing device
dmix:CARD=HDMI,DEV=8
    HDA Intel HDMI, HDMI 2
    Direct sample mixing device
dsnoop:CARD=HDMI,DEV=3
    HDA Intel HDMI, HDMI 0
    Direct sample snooping device
dsnoop:CARD=HDMI,DEV=7
    HDA Intel HDMI, HDMI 1
    Direct sample snooping device
dsnoop:CARD=HDMI,DEV=8
    HDA Intel HDMI, HDMI 2
    Direct sample snooping device
hw:CARD=HDMI,DEV=3
    HDA Intel HDMI, HDMI 0
    Direct hardware device without any conversions
hw:CARD=HDMI,DEV=7
    HDA Intel HDMI, HDMI 1
    Direct hardware device without any conversions
hw:CARD=HDMI,DEV=8
    HDA Intel HDMI, HDMI 2
    Direct hardware device without any conversions
plughw:CARD=HDMI,DEV=3
    HDA Intel HDMI, HDMI 0
    Hardware device with all software conversions
plughw:CARD=HDMI,DEV=7
    HDA Intel HDMI, HDMI 1
    Hardware device with all software conversions
plughw:CARD=HDMI,DEV=8
    HDA Intel HDMI, HDMI 2
    Hardware device with all software conversions
sysdefault:CARD=PCH
    HDA Intel PCH, ALC269VC Analog
    Default Audio Device
front:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    Front speakers
surround21:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
dmix:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    Direct sample mixing device
dsnoop:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    Direct sample snooping device
hw:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    Direct hardware device without any conversions
plughw:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    Hardware device with all software conversions
-------------- next part --------------
Module #0
	Name: module-device-restore
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the volume/mute state of devices"
		module.version = "9.0"

Module #1
	Name: module-stream-restore
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the volume/mute/device state of streams"
		module.version = "9.0"

Module #2
	Name: module-card-restore
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore profile of cards"
		module.version = "9.0"

Module #3
	Name: module-augment-properties
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Augment the property sets of streams with additional static information"
		module.version = "9.0"

Module #4
	Name: module-switch-on-port-available
	Argument: 
	Usage counter: n/a
	Properties:
		

Module #6
	Name: module-alsa-sink
	Argument: device_id=1
	Usage counter: 0
	Properties:
		module.author = "Lennart Poettering"
		module.description = "ALSA Sink"
		module.version = "9.0"

Module #7
	Name: module-alsa-source
	Argument: device_id=1
	Usage counter: 0
	Properties:
		module.author = "Lennart Poettering"
		module.description = "ALSA Source"
		module.version = "9.0"

Module #8
	Name: module-alsa-source
	Argument: device_id=2
	Usage counter: 0
	Properties:
		module.author = "Lennart Poettering"
		module.description = "ALSA Source"
		module.version = "9.0"

Module #9
	Name: module-native-protocol-unix
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Native protocol (UNIX sockets)"
		module.version = "9.0"

Module #10
	Name: module-default-device-restore
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the default sink and source"
		module.version = "9.0"

Module #11
	Name: module-rescue-streams
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "When a sink/source is removed, try to move its streams to the default sink/source"
		module.version = "9.0"

Module #12
	Name: module-always-sink
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Colin Guthrie"
		module.description = "Garde toujours au moins une destination même si elle est vide"
		module.version = "9.0"

Module #13
	Name: module-intended-roles
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically set device of streams based on intended roles of devices"
		module.version = "9.0"

Module #14
	Name: module-suspend-on-idle
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "When a sink/source is idle for too long, suspend it"
		module.version = "9.0"

Module #15
	Name: module-console-kit
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Create a client for each ConsoleKit session of this user"
		module.version = "9.0"

Module #16
	Name: module-systemd-login
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Create a client for each login session of this user"
		module.version = "9.0"

Module #17
	Name: module-position-event-sounds
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
		module.version = "9.0"

Module #18
	Name: module-role-cork
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Mute & cork streams with certain roles while others exist"
		module.version = "9.0"

Module #19
	Name: module-filter-heuristics
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Colin Guthrie"
		module.description = "Detect when various filters are desirable"
		module.version = "9.0"

Module #20
	Name: module-filter-apply
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Colin Guthrie"
		module.description = "Load filter sinks automatically when needed"
		module.version = "9.0"

Module #21
	Name: module-x11-publish
	Argument: display=:0.0
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "X11 credential publisher"
		module.version = "9.0"

Module #22
	Name: module-x11-cork-request
	Argument: display=:0.0
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "Synthesize X11 media key events when cork/uncork is requested"
		module.version = "9.0"

Module #23
	Name: module-x11-xsmp
	Argument: display=:0.0 session_manager=local/eiffel6:@/tmp/.ICE-unix/4803,unix/eiffel6:/tmp/.ICE-unix/4803
	Usage counter: n/a
	Properties:
		module.author = "Lennart Poettering"
		module.description = "X11 session management"
		module.version = "9.0"

Sink #0
	State: SUSPENDED
	Name: alsa_output.1.analog-stereo
	Description: Audio interne Stéréo analogique
	Driver: module-alsa-sink.c
	Sample Specification: s16le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 6
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor Source: alsa_output.1.analog-stereo.monitor
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC269VC Analog"
		alsa.id = "ALC269VC Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "1"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xf7e10000 irq 45"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "9c20"
		device.product.name = "8 Series HD Audio Controller"
		device.form_factor = "internal"
		device.string = "front:1"
		device.buffering.buffer_size = "65536"
		device.buffering.fragment_size = "32768"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Stéréo analogique"
		device.description = "Audio interne Stéréo analogique"
		alsa.mixer_name = "Realtek ALC269VC"
		alsa.components = "HDA:10ec0269,15583300,00100202"
		device.icon_name = "audio-card-analog-pci"
	Formats:
		pcm

Source #0
	State: SUSPENDED
	Name: alsa_output.1.analog-stereo.monitor
	Description: Monitor of Audio interne Stéréo analogique
	Driver: module-alsa-sink.c
	Sample Specification: s16le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 6
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: alsa_output.1.analog-stereo
	Latency: 0 usec, configured 0 usec
	Flags: DECIBEL_VOLUME LATENCY 
	Properties:
		device.description = "Monitor of Audio interne Stéréo analogique"
		device.class = "monitor"
		device.icon_name = "audio-input-microphone"
	Formats:
		pcm

Source #1
	State: SUSPENDED
	Name: alsa_input.1.analog-stereo
	Description: Audio interne Stéréo analogique
	Driver: module-alsa-source.c
	Sample Specification: s16le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 7
	Mute: no
	Volume: front-left: 48580 /  74% / -7.80 dB,   front-right: 48580 /  74% / -7.80 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: n/a
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC269VC Analog"
		alsa.id = "ALC269VC Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "1"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xf7e10000 irq 45"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "9c20"
		device.product.name = "8 Series HD Audio Controller"
		device.form_factor = "internal"
		device.string = "front:1"
		device.buffering.buffer_size = "65536"
		device.buffering.fragment_size = "32768"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Stéréo analogique"
		device.description = "Audio interne Stéréo analogique"
		alsa.mixer_name = "Realtek ALC269VC"
		alsa.components = "HDA:10ec0269,15583300,00100202"
		device.icon_name = "audio-input-microphone-analog-pci"
	Formats:
		pcm

Source #2
	State: SUSPENDED
	Name: alsa_input.2.analog-mono
	Description: QuickCam Pro 9000 Mono analogique
	Driver: module-alsa-source.c
	Sample Specification: s16le 1ch 16000Hz
	Channel Map: mono
	Owner Module: 8
	Mute: no
	Volume: mono: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: n/a
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "USB Audio"
		alsa.id = "USB Audio"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "2"
		alsa.card_name = "QuickCam Pro 9000"
		alsa.long_card_name = "Logitech, Inc. QuickCam Pro 9000 at usb-0000:00:14.0-1.3, high speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:1.3:1.2"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1.3/2-1.3:1.2/sound/card2"
		udev.id = "usb-046d_0990_E09F8DD8-02"
		device.bus = "usb"
		device.vendor.id = "046d"
		device.vendor.name = "Logitech, Inc."
		device.product.id = "0990"
		device.product.name = "QuickCam Pro 9000"
		device.serial = "046d_0990_E09F8DD8"
		device.form_factor = "webcam"
		device.string = "hw:2"
		device.buffering.buffer_size = "64000"
		device.buffering.fragment_size = "32000"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-mono"
		device.profile.description = "Mono analogique"
		device.description = "QuickCam Pro 9000 Mono analogique"
		alsa.mixer_name = "USB Mixer"
		alsa.components = "USB046d:0990"
		device.icon_name = "camera-web-analog-usb"
	Formats:
		pcm

Client #0
	Driver: module-systemd-login.c
	Owner Module: 16
	Properties:
		application.name = "Login Session 3"
		systemd-login.session = "3"

Client #1
	Driver: protocol-native.c
	Owner Module: 9
	Properties:
		application.name = "xfce4-pulseaudio-plugin"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "31"
		application.version = "0.2.4"
		application.id = "org.xfce.pulseaudio-plugin"
		application.icon_name = "multimedia-volume-control"
		application.process.id = "4883"
		application.process.user = "fmescam"
		application.process.host = "eiffel6"
		application.process.binary = "wrapper-2.0"
		application.language = "fr_FR.utf8"
		window.x11.display = ":0.0"
		application.process.machine_id = "39914fc8f5234531a4b323d29a67f70c"
		application.process.session_id = "3"

Client #5
	Driver: module-x11-xsmp.c
	Owner Module: 23
	Properties:
		application.name = "XSMP Session on xfce4-session as 23190bc41-43a2-4e48-b5be-c917d56ba84d"
		xsmp.vendor = "xfce4-session"
		xsmp.client.id = "23190bc41-43a2-4e48-b5be-c917d56ba84d"

Client #6
	Driver: protocol-native.c
	Owner Module: 9
	Properties:
		application.name = "Skype"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "31"
		application.process.id = "4840"
		application.process.user = "fmescam"
		application.process.host = "eiffel6"
		application.process.binary = "skype"
		application.language = "fr_FR.utf8"
		window.x11.display = ":0"
		application.process.machine_id = "39914fc8f5234531a4b323d29a67f70c"
		application.process.session_id = "3"
		application.icon_name = "skype.png"

Client #39
	Driver: protocol-native.c
	Owner Module: 9
	Properties:
		application.name = "Chrome input"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "31"
		application.process.id = "20765"
		application.process.user = "fmescam"
		application.process.host = "eiffel6"
		application.process.binary = "chrome"
		window.x11.display = ":0.0"
		application.language = "fr_FR.utf8"
		application.process.machine_id = "39914fc8f5234531a4b323d29a67f70c"
		application.process.session_id = "3"

Client #43
	Driver: protocol-native.c
	Owner Module: 9
	Properties:
		application.name = "pactl"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "31"
		application.process.id = "24177"
		application.process.user = "fmescam"
		application.process.host = "eiffel6"
		application.process.binary = "pactl"
		application.language = "C"
		window.x11.display = ":0.0"
		application.process.machine_id = "39914fc8f5234531a4b323d29a67f70c"
		application.process.session_id = "3"
-------------- next part --------------
Server String: unix:/run/user/1000/pulse/native
Library Protocol Version: 31
Server Protocol Version: 31
Is Local: yes
Client Index: 44
Tile Size: 65472
User Name: fmescam
Host Name: eiffel6
Server Name: pulseaudio
Server Version: 9.0
Default Sample Specification: s16le 2ch 44100Hz
Default Channel Map: front-left,front-right
Default Sink: alsa_output.1.analog-stereo
Default Source: alsa_input.1.analog-stereo
Cookie: c4b3:eee2


More information about the pkg-pulseaudio-devel mailing list