Bug#832601: pulseaudio does recognize usb audio device only after restart
Michael Meier
crap at rmm.li
Wed Jul 27 11:56:12 UTC 2016
Package: pulseaudio
Version: 9.0-1.1
Severity: normal
When I connect a usb audio device, pulseaudio does not notice that I connected it. I need to restart pulseaudio first, with "pulseaudio -k".
Then it works without problems. But after pluging it out and in again, it is necesary to restart pulseaudio again.
here dmesg, if it helps...
[11538.301243] usb 1-2: USB disconnect, device number 7
[11549.333371] usb 1-2: new full-speed USB device number 8 using xhci_hcd
[11549.464521] usb 1-2: New USB device found, idVendor=24ae, idProduct=6000
[11549.464525] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[11549.464526] usb 1-2: Product: Rapoo Wireless Audio
[11549.464528] usb 1-2: Manufacturer: Rapoo
[11549.469950] input: Rapoo Rapoo Wireless Audio as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.3/0003:24AE:6000.0009/input/input19
[11549.526033] hid-generic 0003:24AE:6000.0009: input,hidraw3: USB HID v1.00 Device [Rapoo Rapoo Wireless Audio] on usb-0000:00:14.0-2/input3
-- Package-specific info:
File '/etc/default/pulseaudio' does not exist
-- System Information:
Debian Release: stretch/sid
APT prefers testing
APT policy: (900, 'testing'), (800, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.6.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages pulseaudio depends on:
ii adduser 3.115
ii libasound2 1.1.1-2
ii libasound2-plugins 1.1.1-1
ii libc6 2.23-2
ii libcap2 1:2.25-1
ii libdbus-1-3 1.10.8-1
ii libfftw3-single3 3.3.4-2+b1
ii libgcc1 1:6.1.1-9
ii libice6 2:1.0.9-1+b1
ii libltdl7 2.4.6-0.1
ii liborc-0.4-0 1:0.4.25-1
ii libpulse0 9.0-1.1
ii libsm6 2:1.2.2-1+b1
ii libsndfile1 1.0.25-10
ii libsoxr0 0.1.2-1
ii libspeexdsp1 1.2~rc1.2-1
ii libstdc++6 6.1.1-9
ii libsystemd0 230-7
ii libtdb1 1.3.9-1
ii libudev1 230-7
ii libwebrtc-audio-processing1 0.3-1
ii libx11-6 2:1.6.3-1
ii libx11-xcb1 2:1.6.3-1
ii libxcb1 1.11.1-1
ii libxtst6 2:1.2.2-1+b1
ii lsb-base 9.20160629
ii pulseaudio-utils 9.0-1.1
Versions of packages pulseaudio recommends:
pn pulseaudio-module-udev <none>
pn pulseaudio-module-x11 <none>
ii rtkit 0.11-4
Versions of packages pulseaudio suggests:
ii paman 0.9.4-1+b2
pn paprefs <none>
ii pavucontrol 3.0-3+b2
pn pavumeter <none>
-- no debconf information
-------------- next part --------------
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; default-sink =
; default-source =
; default-server =
; default-dbus-server =
; autospawn = yes
; daemon-binary = /usr/bin/pulseaudio
; extra-arguments = --log-target=syslog
; cookie-file =
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; auto-connect-localhost = no
; auto-connect-display = no
-------------- next part --------------
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; lock-memory = no
; cpu-limit = no
; high-priority = yes
; nice-level = -11
; realtime-scheduling = yes
; realtime-priority = 5
; exit-idle-time = 20
; scache-idle-time = 20
; dl-search-path = (depends on architecture)
; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa
; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0
; resample-method = speex-float-1
; enable-remixing = yes
; enable-lfe-remixing = no
; lfe-crossover-freq = 0
; flat-volumes = yes
; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 200000
; default-sample-format = s16le
; default-sample-rate = 44100
; alternate-sample-rate = 48000
; default-sample-channels = 2
; default-channel-map = front-left,front-right
; default-fragments = 4
; default-fragment-size-msec = 25
; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0
-------------- next part --------------
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)
.fail
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev support)
load-module module-detect
.endif
### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif
### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif
.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish
### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv
### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor
### Load additional modules from GConf settings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists module-gconf.so
.nofail
load-module module-gconf
.fail
.endif
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Honour intended role device property
load-module module-intended-roles
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif
### Enable positioned event sounds
load-module module-position-event-sounds
### Cork music/video streams when a phone stream is active
load-module module-role-cork
### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply
### Make some devices default
#set-default-sink output
#set-default-source input
-------------- next part --------------
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started in system
# mode.
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev/hal support)
load-module module-detect
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Automatically restore the volume of streams and devices
load-module module-stream-restore
load-module module-device-restore
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### Enable positioned event sounds
load-module module-position-event-sounds
-------------- next part --------------
default
Playback/recording through the PulseAudio sound server
null
Discard all samples (playback) or generate zero samples (capture)
sysdefault:CARD=PCH
HDA Intel PCH, ALC269VC Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VC Analog
Front speakers
surround21:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VC Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VC Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VC Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VC Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VC Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VC Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=PCH,DEV=0
HDA Intel PCH, HDMI 0
HDMI Audio Output
dmix:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VC Analog
Direct sample mixing device
dmix:CARD=PCH,DEV=3
HDA Intel PCH, HDMI 0
Direct sample mixing device
dsnoop:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VC Analog
Direct sample snooping device
dsnoop:CARD=PCH,DEV=3
HDA Intel PCH, HDMI 0
Direct sample snooping device
hw:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VC Analog
Direct hardware device without any conversions
hw:CARD=PCH,DEV=3
HDA Intel PCH, HDMI 0
Direct hardware device without any conversions
plughw:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VC Analog
Hardware device with all software conversions
plughw:CARD=PCH,DEV=3
HDA Intel PCH, HDMI 0
Hardware device with all software conversions
sysdefault:CARD=Audio
Rapoo Wireless Audio, USB Audio
Default Audio Device
front:CARD=Audio,DEV=0
Rapoo Wireless Audio, USB Audio
Front speakers
surround21:CARD=Audio,DEV=0
Rapoo Wireless Audio, USB Audio
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Audio,DEV=0
Rapoo Wireless Audio, USB Audio
4.0 Surround output to Front and Rear speakers
surround41:CARD=Audio,DEV=0
Rapoo Wireless Audio, USB Audio
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Audio,DEV=0
Rapoo Wireless Audio, USB Audio
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Audio,DEV=0
Rapoo Wireless Audio, USB Audio
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Audio,DEV=0
Rapoo Wireless Audio, USB Audio
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Audio,DEV=0
Rapoo Wireless Audio, USB Audio
IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=Audio,DEV=0
Rapoo Wireless Audio, USB Audio
Direct sample mixing device
dsnoop:CARD=Audio,DEV=0
Rapoo Wireless Audio, USB Audio
Direct sample snooping device
hw:CARD=Audio,DEV=0
Rapoo Wireless Audio, USB Audio
Direct hardware device without any conversions
plughw:CARD=Audio,DEV=0
Rapoo Wireless Audio, USB Audio
Hardware device with all software conversions
-------------- next part --------------
Module #0
Name: module-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "9.0"
Module #1
Name: module-stream-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "9.0"
Module #2
Name: module-card-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "9.0"
Module #3
Name: module-augment-properties
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "9.0"
Module #4
Name: module-switch-on-port-available
Argument:
Usage counter: n/a
Properties:
Module #6
Name: module-alsa-sink
Argument: device_id=0
Usage counter: 1
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Sink"
module.version = "9.0"
Module #7
Name: module-alsa-source
Argument: device_id=0
Usage counter: 1
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Source"
module.version = "9.0"
Module #8
Name: module-alsa-sink
Argument: device_id=1
Usage counter: 3
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Sink"
module.version = "9.0"
Module #9
Name: module-alsa-source
Argument: device_id=1
Usage counter: 1
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Source"
module.version = "9.0"
Module #10
Name: module-bluetooth-policy
Argument:
Usage counter: n/a
Properties:
module.author = "Fr?d?ric Dalleau"
module.description = "When a bluetooth sink or source is added, load module-loopback"
module.version = "9.0"
Module #11
Name: module-bluetooth-discover
Argument:
Usage counter: n/a
Properties:
module.author = "Jo?o Paulo Rechi Vita"
module.description = "Detect available Bluetooth daemon and load the corresponding discovery module"
module.version = "9.0"
Module #12
Name: module-bluez5-discover
Argument:
Usage counter: n/a
Properties:
module.author = "Jo?o Paulo Rechi Vita"
module.description = "Detect available BlueZ 5 Bluetooth audio devices and load BlueZ 5 Bluetooth audio drivers"
module.version = "9.0"
Module #13
Name: module-native-protocol-unix
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "9.0"
Module #14
Name: module-default-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink and source"
module.version = "9.0"
Module #15
Name: module-rescue-streams
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to move its streams to the default sink/source"
module.version = "9.0"
Module #16
Name: module-always-sink
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Always keeps at least one sink loaded even if it's a null one"
module.version = "9.0"
Module #17
Name: module-intended-roles
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based on intended roles of devices"
module.version = "9.0"
Module #18
Name: module-suspend-on-idle
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long, suspend it"
module.version = "9.0"
Module #19
Name: module-console-kit
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each ConsoleKit session of this user"
module.version = "9.0"
Module #20
Name: module-systemd-login
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of this user"
module.version = "9.0"
Module #21
Name: module-position-event-sounds
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
module.version = "9.0"
Module #22
Name: module-role-cork
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles while others exist"
module.version = "9.0"
Module #23
Name: module-filter-heuristics
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "9.0"
Module #24
Name: module-filter-apply
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when needed"
module.version = "9.0"
Sink #0
State: IDLE
Name: alsa_output.0.analog-stereo
Description: Built-in Audio Analog Stereo
Driver: module-alsa-sink.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: no
Volume: front-left: 50221 / 77% / -6.94 dB, front-right: 50221 / 77% / -6.94 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.0.analog-stereo.monitor
Latency: 32402 usec, configured 40000 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC269VC Analog"
alsa.id = "ALC269VC Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf0610000 irq 28"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1e20"
device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC269VC"
alsa.components = "HDA:10ec0269,144dc0d7,00100202 HDA:80862806,80860101,00100000"
device.icon_name = "audio-card-analog-pci"
Formats:
pcm
Sink #1
State: RUNNING
Name: alsa_output.1.analog-stereo
Description: Rapoo Wireless Audio Analog Stereo
Driver: module-alsa-sink.c
Sample Specification: s16le 2ch 32000Hz
Channel Map: front-left,front-right
Owner Module: 8
Mute: no
Volume: front-left: 93164 / 142% / 9.17 dB, front-right: 93164 / 142% / 9.17 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.1.analog-stereo.monitor
Latency: 46767 usec, configured 40000 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "Rapoo Wireless Audio"
alsa.long_card_name = "Rapoo Rapoo Wireless Audio at usb-0000:00:14.0-2, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:14.0-usb-0:2:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/sound/card1"
udev.id = "usb-Rapoo_Rapoo_Wireless_Audio-00"
device.bus = "usb"
device.vendor.id = "24ae"
device.vendor.name = "Rapoo"
device.product.id = "6000"
device.product.name = "Rapoo Wireless Audio"
device.serial = "Rapoo_Rapoo_Wireless_Audio"
device.string = "front:1"
device.buffering.buffer_size = "256000"
device.buffering.fragment_size = "128000"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Rapoo Wireless Audio Analog Stereo"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB24ae:6000"
device.icon_name = "audio-card-analog-usb"
Formats:
pcm
Source #0
State: RUNNING
Name: alsa_output.0.analog-stereo.monitor
Description: Monitor of Built-in Audio Analog Stereo
Driver: module-alsa-sink.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.0.analog-stereo
Latency: 0 usec, configured 40000 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Built-in Audio Analog Stereo"
device.class = "monitor"
device.icon_name = "audio-input-microphone"
Formats:
pcm
Source #1
State: RUNNING
Name: alsa_input.0.analog-stereo
Description: Built-in Audio Analog Stereo
Driver: module-alsa-source.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: n/a
Latency: 712 usec, configured 40000 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC269VC Analog"
alsa.id = "ALC269VC Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf0610000 irq 28"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1e20"
device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC269VC"
alsa.components = "HDA:10ec0269,144dc0d7,00100202 HDA:80862806,80860101,00100000"
device.icon_name = "audio-input-microphone-analog-pci"
Formats:
pcm
Source #2
State: RUNNING
Name: alsa_output.1.analog-stereo.monitor
Description: Monitor of Rapoo Wireless Audio Analog Stereo
Driver: module-alsa-sink.c
Sample Specification: s16le 2ch 32000Hz
Channel Map: front-left,front-right
Owner Module: 8
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.1.analog-stereo
Latency: 0 usec, configured 40000 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Rapoo Wireless Audio Analog Stereo"
device.class = "monitor"
device.icon_name = "audio-input-microphone"
Formats:
pcm
Source #3
State: RUNNING
Name: alsa_input.1.analog-mono
Description: Rapoo Wireless Audio Analog Mono
Driver: module-alsa-source.c
Sample Specification: s16le 1ch 48000Hz
Channel Map: mono
Owner Module: 9
Mute: no
Volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: n/a
Latency: 302 usec, configured 40000 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "Rapoo Wireless Audio"
alsa.long_card_name = "Rapoo Rapoo Wireless Audio at usb-0000:00:14.0-2, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:14.0-usb-0:2:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/sound/card1"
udev.id = "usb-Rapoo_Rapoo_Wireless_Audio-00"
device.bus = "usb"
device.vendor.id = "24ae"
device.vendor.name = "Rapoo"
device.product.id = "6000"
device.product.name = "Rapoo Wireless Audio"
device.serial = "Rapoo_Rapoo_Wireless_Audio"
device.string = "hw:1"
device.buffering.buffer_size = "192000"
device.buffering.fragment_size = "96000"
device.access_mode = "mmap+timer"
device.profile.name = "analog-mono"
device.profile.description = "Analog Mono"
device.description = "Rapoo Wireless Audio Analog Mono"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB24ae:6000"
device.icon_name = "audio-input-microphone-analog-usb"
Formats:
pcm
Sink Input #1
Driver: protocol-native.c
Owner Module: 13
Client: 7
Sink: 1
Sample Specification: float32le 2ch 44100Hz
Channel Map: front-left,front-right
Format: pcm, format.sample_format = "\"float32le\"" format.channels = "2" format.rate = "44100" format.channel_map = "\"front-left,front-right\""
Corked: no
Mute: no
Volume: front-left: 93164 / 142% / 9.17 dB, front-right: 93164 / 142% / 9.17 dB
balance 0.00
Buffer Latency: 91958 usec
Sink Latency: 46471 usec
Resample method: speex-float-1
Properties:
media.name = "'\"Mondschein\" Sonate Nr. 14 cis-Moll, Op. 27 Nr. 2 : I. Adagio sostenuto' by 'Ludwig van Beethoven'"
application.name = "gmusicbrowser"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "31"
media.role = "music"
application.icon_name = "gmusicbrowser"
application.process.id = "18463"
application.process.user = "rmm"
application.process.host = "RMMbook"
application.process.binary = "perl"
window.x11.display = ":0"
application.language = "en_US.UTF-8"
application.process.machine_id = "7c412deabdb7a84b67f4781352cd9940"
application.process.session_id = "5"
module-stream-restore.id = "sink-input-by-media-role:music"
media.title = "\"Mondschein\" Sonate Nr. 14 cis-Moll, Op. 27 Nr. 2 : I. Adagio sostenuto"
media.artist = "Ludwig van Beethoven"
Source Output #0
Driver: protocol-native.c
Owner Module: 13
Client: 6
Source: 0
Sample Specification: float32le 1ch 25Hz
Channel Map: mono
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\""
Corked: no
Mute: no
Volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 20839 usec
Source Latency: 0 usec
Resample method: peaks
Properties:
media.name = "Peak detect"
application.name = "PulseAudio Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "31"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "3.0"
application.process.id = "17858"
application.process.user = "rmm"
application.process.host = "RMMbook"
application.process.binary = "pavucontrol"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "7c412deabdb7a84b67f4781352cd9940"
application.process.session_id = "5"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
Source Output #1
Driver: protocol-native.c
Owner Module: 13
Client: 6
Source: 1
Sample Specification: float32le 1ch 25Hz
Channel Map: mono
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\""
Corked: no
Mute: no
Volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 0 usec
Source Latency: 1005 usec
Resample method: peaks
Properties:
media.name = "Peak detect"
application.name = "PulseAudio Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "31"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "3.0"
application.process.id = "17858"
application.process.user = "rmm"
application.process.host = "RMMbook"
application.process.binary = "pavucontrol"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "7c412deabdb7a84b67f4781352cd9940"
application.process.session_id = "5"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
Source Output #2
Driver: protocol-native.c
Owner Module: 13
Client: 6
Source: 2
Sample Specification: float32le 1ch 25Hz
Channel Map: mono
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\""
Corked: no
Mute: no
Volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 34750 usec
Source Latency: 0 usec
Resample method: peaks
Properties:
media.name = "Peak detect"
application.name = "PulseAudio Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "31"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "3.0"
application.process.id = "17858"
application.process.user = "rmm"
application.process.host = "RMMbook"
application.process.binary = "pavucontrol"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "7c412deabdb7a84b67f4781352cd9940"
application.process.session_id = "5"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
Source Output #3
Driver: protocol-native.c
Owner Module: 13
Client: 6
Source: 3
Sample Specification: float32le 1ch 25Hz
Channel Map: mono
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\""
Corked: no
Mute: no
Volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 0 usec
Source Latency: 549 usec
Resample method: peaks
Properties:
media.name = "Peak detect"
application.name = "PulseAudio Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "31"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "3.0"
application.process.id = "17858"
application.process.user = "rmm"
application.process.host = "RMMbook"
application.process.binary = "pavucontrol"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "7c412deabdb7a84b67f4781352cd9940"
application.process.session_id = "5"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
Source Output #6
Driver: protocol-native.c
Owner Module: 13
Client: 6
Source: 2
Sample Specification: float32le 1ch 25Hz
Channel Map: mono
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\""
Corked: no
Mute: no
Volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 34781 usec
Source Latency: 0 usec
Resample method: peaks
Properties:
media.name = "Peak detect"
application.name = "PulseAudio Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "31"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "3.0"
application.process.id = "17858"
application.process.user = "rmm"
application.process.host = "RMMbook"
application.process.binary = "pavucontrol"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "7c412deabdb7a84b67f4781352cd9940"
application.process.session_id = "5"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
Client #0
Driver: module-systemd-login.c
Owner Module: 20
Properties:
application.name = "Login Session 5"
systemd-login.session = "5"
Client #1
Driver: protocol-native.c
Owner Module: 13
Properties:
application.name = "Icedove"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "31"
application.icon_name = "icedove"
application.version = "45.1.0"
application.process.id = "11583"
application.process.user = "rmm"
application.process.host = "RMMbook"
application.process.binary = "icedove"
window.x11.display = ":0"
application.language = "en_US.UTF-8"
application.process.machine_id = "7c412deabdb7a84b67f4781352cd9940"
application.process.session_id = "5"
Client #2
Driver: protocol-native.c
Owner Module: 13
Properties:
application.name = "Firefox"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "31"
application.icon_name = "firefox"
application.version = "47.0.1"
application.process.id = "11627"
application.process.user = "rmm"
application.process.host = "RMMbook"
application.process.binary = "firefox"
window.x11.display = ":0"
application.language = "en_US.UTF-8"
application.process.machine_id = "7c412deabdb7a84b67f4781352cd9940"
application.process.session_id = "5"
Client #3
Driver: protocol-native.c
Owner Module: 13
Properties:
application.name = "KMix"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "31"
application.process.id = "5031"
application.process.user = "rmm"
application.process.host = "RMMbook"
application.process.binary = "kmix"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "7c412deabdb7a84b67f4781352cd9940"
application.process.session_id = "5"
application.icon_name = "kmix"
Client #4
Driver: protocol-native.c
Owner Module: 13
Properties:
application.name = "libphonon"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "31"
application.process.id = "4770"
application.process.user = "rmm"
application.process.host = "RMMbook"
application.process.binary = "kdeinit5"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "7c412deabdb7a84b67f4781352cd9940"
application.process.session_id = "5"
Client #5
Driver: protocol-native.c
Owner Module: 13
Properties:
application.name = "libphonon"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "31"
application.process.id = "13372"
application.process.user = "rmm"
application.process.host = "RMMbook"
application.process.binary = "krdc"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "7c412deabdb7a84b67f4781352cd9940"
application.process.session_id = "5"
Client #6
Driver: protocol-native.c
Owner Module: 13
Properties:
application.name = "PulseAudio Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "31"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "3.0"
application.process.id = "17858"
application.process.user = "rmm"
application.process.host = "RMMbook"
application.process.binary = "pavucontrol"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "7c412deabdb7a84b67f4781352cd9940"
application.process.session_id = "5"
Client #7
Driver: protocol-native.c
Owner Module: 13
Properties:
application.name = "gmusicbrowser"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "31"
media.role = "music"
application.icon_name = "gmusicbrowser"
application.process.id = "18463"
application.process.user = "rmm"
application.process.host = "RMMbook"
application.process.binary = "perl"
window.x11.display = ":0"
application.language = "en_US.UTF-8"
application.process.machine_id = "7c412deabdb7a84b67f4781352cd9940"
application.process.session_id = "5"
Client #23
Driver: protocol-native.c
Owner Module: 13
Properties:
application.name = "pactl"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "31"
application.process.id = "19604"
application.process.user = "rmm"
application.process.host = "RMMbook"
application.process.binary = "pactl"
application.language = "C"
window.x11.display = ":0"
application.process.machine_id = "7c412deabdb7a84b67f4781352cd9940"
application.process.session_id = "5"
-------------- next part --------------
Server String: /run/user/1000/pulse/native
Library Protocol Version: 31
Server Protocol Version: 31
Is Local: yes
Client Index: 24
Tile Size: 65472
User Name: rmm
Host Name: RMMbook
Server Name: pulseaudio
Server Version: 9.0
Default Sample Specification: s16le 2ch 44100Hz
Default Channel Map: front-left,front-right
Default Sink: alsa_output.0.analog-stereo
Default Source: alsa_input.0.analog-stereo
Cookie: 224e:0897
More information about the pkg-pulseaudio-devel
mailing list