Bug#817756: pulseaudio: load-module module-alsa-sink device=plug:dmixer breaks choosing path-file
Jakobus Schürz
wertstoffe at nurfuerspam.de
Wed Mar 9 21:50:40 UTC 2016
Package: pulseaudio
Version: 8.0-1
Severity: normal
Dear Maintainer,
I had for a year a config working on my laptop. I have a asound.conf
which defines a dmixer-device. Pulseaudio uses this dmix-device for
output (so i can play music from a systemwide-mpd simultanious to watching a
video as logged in user).
I also have my own configuration on profile-sets and path-files. Because
plug in and out my headphones mutet the master and my laptop was totally
mutet and didn't get unmutet.
This all worked until a short time. Since there, plug in or out my
headphones never changed the mute-state from the headphone- and
pcm-mixer.
I found out, when i comment out the line
load-module module-alsa-sink device=plug:dmixer
in /etc/pulse/default.pa, choosing the path works again.
But when i comment this line, i can't hear music from mpd, when the
pulseaudo from the user is playing sound and vice versa.
So now i can choose hearing all the sounds (from user-pulse and
systemwide mpd) OR plug in and out some headphones, and change soundpath
to headphones or internal speakers... but not both together.
Do you need more information?
Jakob
-- Package-specific info:
File '/etc/default/pulseaudio' does not exist
-- System Information:
Debian Release: stretch/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'stable-updates'), (500, 'unstable'), (500, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.3.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_AT.utf8, LC_CTYPE=de_AT.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages pulseaudio depends on:
ii adduser 3.113+nmu3
ii libasound2 1.1.0-1
ii libasound2-plugins 1.1.0-1
ii libc6 2.21-9
ii libcap2 1:2.24-12
ii libdbus-1-3 1.10.6-1
ii libfftw3-single3 3.3.4-2+b1
ii libgcc1 1:5.3.1-10
ii libice6 2:1.0.9-1+b1
ii libltdl7 2.4.6-0.1
ii liborc-0.4-0 1:0.4.24-1
ii libpulse0 8.0-1
ii libsm6 2:1.2.2-1+b1
ii libsndfile1 1.0.25-10
ii libsoxr0 0.1.2-1
ii libspeexdsp1 1.2~rc1.2-1
ii libstdc++6 5.3.1-10
ii libsystemd0 229-2
ii libtdb1 1.3.8-1
ii libudev1 229-2
ii libwebrtc-audio-processing-0 0.1-3
ii libx11-6 2:1.6.3-1
ii libx11-xcb1 2:1.6.3-1
ii libxcb1 1.11.1-1
ii libxtst6 2:1.2.2-1+b1
ii lsb-base 9.20160110
ii pulseaudio-utils 8.0-1
ii udev 229-2
Versions of packages pulseaudio recommends:
ii pulseaudio-module-x11 8.0-1
ii rtkit 0.11-4
Versions of packages pulseaudio suggests:
ii paman 0.9.4-1+b2
ii paprefs 0.9.10-2
ii pavucontrol 3.0-3+b2
ii pavumeter 0.9.3-4+b2
-- Configuration Files:
/etc/pulse/daemon.conf changed:
; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; lock-memory = no
; cpu-limit = no
high-priority = yes
nice-level = -15
realtime-scheduling = no
realtime-priority = 9
exit-idle-time = 20
; scache-idle-time = 20
; dl-search-path = (depends on architecture)
; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa
; log-target = auto
log-target = journal
; log-level = notice
log-level = debug
; log-meta = no
; log-time = no
; log-backtrace = 0
; resample-method = speex-float-1
resample-method = speex-float-10
; enable-remixing = yes
; enable-lfe-remixing = yes
; lfe-crossover-freq = 120
; flat-volumes = yes
; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
rlimit-nice = 19
; rlimit-rtprio = 9
; rlimit-rttime = 200000
; default-sample-format = s16le
; default-sample-rate = 44100
; alternate-sample-rate = 48000
; default-sample-channels = 2
; default-channel-map = front-left,front-right
; default-fragments = 4
default-fragments = 16
; default-fragment-size-msec = 25
default-fragment-size-msec = 3
; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0
/etc/pulse/default.pa changed:
.nofail
.fail
load-module module-default-device-restore
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
load-module module-augment-properties
load-module module-alsa-sink device=plug:dmixer
load-module module-switch-on-port-available
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif
.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
.ifexists module-gconf.so
.nofail
load-module module-gconf
.fail
.endif
load-module module-rescue-streams
load-module module-always-sink
load-module module-intended-roles
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif
load-module module-position-event-sounds
load-module module-role-cork
load-module module-filter-heuristics
load-module module-filter-apply
.ifexists module-dbus-protocol.so
load-module module-dbus-protocol
.endif
/etc/pulse/system.pa changed:
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
load-module module-detect
.endif
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
load-module module-stream-restore
load-module module-device-restore
load-module module-default-device-restore
load-module module-rescue-streams
load-module module-always-sink
load-module module-position-event-sounds
-- no debconf information
-------------- next part --------------
autospawn = yes
extra-arguments= --log-target=journal
-------------- next part --------------
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; lock-memory = no
; cpu-limit = no
high-priority = yes
nice-level = -15
realtime-scheduling = no
realtime-priority = 9
exit-idle-time = 20
; scache-idle-time = 20
; dl-search-path = (depends on architecture)
; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa
; log-target = auto
log-target = journal
; log-level = notice
log-level = debug
; log-meta = no
; log-time = no
; log-backtrace = 0
; resample-method = speex-float-1
resample-method = speex-float-10
; enable-remixing = yes
; enable-lfe-remixing = yes
; lfe-crossover-freq = 120
; flat-volumes = yes
; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
rlimit-nice = 19
; rlimit-rtprio = 9
; rlimit-rttime = 200000
; default-sample-format = s16le
; default-sample-rate = 44100
; alternate-sample-rate = 48000
; default-sample-channels = 2
; default-channel-map = front-left,front-right
; default-fragments = 4
default-fragments = 16
; default-fragment-size-msec = 25
default-fragment-size-msec = 3
; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0
-------------- next part --------------
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)
.nofail
### Load something into the sample cache
#load-sample-lazy x11-bell /usr/share/sounds/freedesktop/stereo/bell.oga
#load-sample-lazy pulse-hotplug /usr/share/sounds/freedesktop/stereo/device-added.oga
#load-sample-lazy pulse-coldplug /usr/share/sounds/freedesktop/stereo/device-added.oga
#load-sample-lazy pulse-access /usr/share/sounds/freedesktop/stereo/message.oga
.fail
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties
### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
load-module module-alsa-sink device=plug:dmixer
#load-module module-alsa-sink device=default
#load-module module-alsa-sink device=plug:dmixer
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
#### Automatically load driver modules depending on the hardware available
#.ifexists module-udev-detect.so
#load-module module-udev-detect
#.else
#### Use the static hardware detection module (for systems that lack udev support)
#load-module module-detect
#.endif
#load-module module-alsa-card device_id=1 tsched=true tsched_buffer_size=1048576 tsched_buffer_watermark=262144
#load-module module-alsa-card device_id=1
### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif
### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif
.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp auth-ip-acl=127.0.0.1
#load-module module-native-protocol-tcp auth-ip-acl=127.0.0.1;192.168.0.0/24 auth-anonymous=1
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish
### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv
### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor
### Load additional modules from GConf settings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists module-gconf.so
.nofail
load-module module-gconf
.fail
.endif
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Honour intended role device property
load-module module-intended-roles
### Automatically suspend sinks/sources that become idle for too long
#load-module module-suspend-on-idle timeout=30
### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
#.ifexists module-console-kit.so
#load-module module-console-kit
#.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif
### Enable positioned event sounds
load-module module-position-event-sounds
### Cork music/video streams when a phone stream is active
load-module module-role-cork
### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply
### Load DBus protocol
.ifexists module-dbus-protocol.so
load-module module-dbus-protocol
.endif
# X11 modules should not be started from default.pa so that one daemon
# can be shared by multiple sessions.
### Load X11 bell module
#load-module module-x11-bell sample=x11-bell
### Register ourselves in the X11 session manager
#load-module module-x11-xsmp
### Publish connection data in the X11 root window
#.ifexists module-x11-publish.so
#.nofail
#load-module module-x11-publish
#.fail
#.endif
### Make some devices default
#set-default-sink output
#set-default-source input
#load-module module-combine-sink
-------------- next part --------------
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started in system
# mode.
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev/hal support)
load-module module-detect
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Automatically restore the volume of streams and devices
load-module module-stream-restore
load-module module-device-restore
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Automatically suspend sinks/sources that become idle for too long
#load-module module-suspend-on-idle
### Enable positioned event sounds
load-module module-position-event-sounds
-------------- next part --------------
default
Playback/recording through the PulseAudio sound server
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
dmixer
dsnooper
hdmi:CARD=HDMI,DEV=0
HDA Intel HDMI, HDMI 0
HDMI Audio Output
hdmi:CARD=HDMI,DEV=1
HDA Intel HDMI, HDMI 1
HDMI Audio Output
hdmi:CARD=HDMI,DEV=2
HDA Intel HDMI, HDMI 2
HDMI Audio Output
dmix:CARD=HDMI,DEV=3
HDA Intel HDMI, HDMI 0
Direct sample mixing device
dmix:CARD=HDMI,DEV=7
HDA Intel HDMI, HDMI 1
Direct sample mixing device
dmix:CARD=HDMI,DEV=8
HDA Intel HDMI, HDMI 2
Direct sample mixing device
dsnoop:CARD=HDMI,DEV=3
HDA Intel HDMI, HDMI 0
Direct sample snooping device
dsnoop:CARD=HDMI,DEV=7
HDA Intel HDMI, HDMI 1
Direct sample snooping device
dsnoop:CARD=HDMI,DEV=8
HDA Intel HDMI, HDMI 2
Direct sample snooping device
hw:CARD=HDMI,DEV=3
HDA Intel HDMI, HDMI 0
Direct hardware device without any conversions
hw:CARD=HDMI,DEV=7
HDA Intel HDMI, HDMI 1
Direct hardware device without any conversions
hw:CARD=HDMI,DEV=8
HDA Intel HDMI, HDMI 2
Direct hardware device without any conversions
plughw:CARD=HDMI,DEV=3
HDA Intel HDMI, HDMI 0
Hardware device with all software conversions
plughw:CARD=HDMI,DEV=7
HDA Intel HDMI, HDMI 1
Hardware device with all software conversions
plughw:CARD=HDMI,DEV=8
HDA Intel HDMI, HDMI 2
Hardware device with all software conversions
sysdefault:CARD=PCH
HDA Intel PCH, ALC3227 Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, ALC3227 Analog
Front speakers
surround21:CARD=PCH,DEV=0
HDA Intel PCH, ALC3227 Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, ALC3227 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, ALC3227 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, ALC3227 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, ALC3227 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, ALC3227 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
dmix:CARD=PCH,DEV=0
HDA Intel PCH, ALC3227 Analog
Direct sample mixing device
dsnoop:CARD=PCH,DEV=0
HDA Intel PCH, ALC3227 Analog
Direct sample snooping device
hw:CARD=PCH,DEV=0
HDA Intel PCH, ALC3227 Analog
Direct hardware device without any conversions
plughw:CARD=PCH,DEV=0
HDA Intel PCH, ALC3227 Analog
Hardware device with all software conversions
-------------- next part --------------
Module #0
Name: module-default-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink and source"
module.version = "8.0"
Module #1
Name: module-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "8.0"
Module #2
Name: module-stream-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "8.0"
Module #3
Name: module-card-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "8.0"
Module #4
Name: module-augment-properties
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "8.0"
Module #5
Name: module-alsa-sink
Argument: device=plug:dmixer
Usage counter: 1
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Sink"
module.version = "8.0"
Module #6
Name: module-switch-on-port-available
Argument:
Usage counter: n/a
Properties:
Module #7
Name: module-bluetooth-policy
Argument:
Usage counter: n/a
Properties:
module.author = "Fr?d?ric Dalleau"
module.description = "When a bluetooth sink or source is added, load module-loopback"
module.version = "8.0"
Module #8
Name: module-bluetooth-discover
Argument:
Usage counter: n/a
Properties:
module.author = "Jo?o Paulo Rechi Vita"
module.description = "Detect available Bluetooth daemon and load the corresponding discovery module"
module.version = "8.0"
Module #9
Name: module-bluez5-discover
Argument:
Usage counter: n/a
Properties:
module.author = "Jo?o Paulo Rechi Vita"
module.description = "Detect available BlueZ 5 Bluetooth audio devices and load BlueZ 5 Bluetooth audio drivers"
module.version = "8.0"
Module #10
Name: module-esound-protocol-unix
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "ESOUND protocol (UNIX sockets)"
module.version = "8.0"
Module #11
Name: module-native-protocol-unix
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "8.0"
Module #12
Name: module-gconf
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "GConf Adapter"
module.version = "8.0"
Module #13
Name: module-rtp-recv
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Receive data from a network via RTP/SAP/SDP"
module.version = "8.0"
Module #14
Name: module-raop-discover
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "mDNS/DNS-SD Service Discovery of RAOP devices"
module.version = "8.0"
Module #15
Name: module-zeroconf-discover
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "mDNS/DNS-SD Service Discovery"
module.version = "8.0"
Module #16
Name: module-combine
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Compatibility module (module-combine rename)"
module.version = "8.0"
Module #17
Name: module-combine-sink
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Combine multiple sinks to one"
module.version = "8.0"
Module #18
Name: module-rescue-streams
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to move its streams to the default sink/source"
module.version = "8.0"
Module #19
Name: module-always-sink
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "H?lt stets einen Sink geladen, selbst wenn dies ein Null-Sink ist"
module.version = "8.0"
Module #20
Name: module-intended-roles
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based on intended roles of devices"
module.version = "8.0"
Module #21
Name: module-systemd-login
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of this user"
module.version = "8.0"
Module #22
Name: module-position-event-sounds
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
module.version = "8.0"
Module #23
Name: module-role-cork
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles while others exist"
module.version = "8.0"
Module #24
Name: module-filter-heuristics
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "8.0"
Module #25
Name: module-filter-apply
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when needed"
module.version = "8.0"
Module #26
Name: module-dbus-protocol
Argument:
Usage counter: n/a
Properties:
module.author = "Tanu Kaskinen"
module.description = "D-Bus interface"
module.version = "8.0"
Sink #0
State: RUNNING
Name: alsa_output.plug_dmixer
Description: Internes Audio
Driver: module-alsa-sink.c
Sample Specification: s16le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 5
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.plug_dmixer.monitor
Latency: 160514 usec, configured 200000 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC3227 Analog"
alsa.id = "ALC3227 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xc0814000 irq 50"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "9c20"
device.product.name = "8 Series HD Audio Controller"
device.form_factor = "internal"
device.string = "plug:dmixer"
device.buffering.buffer_size = "48000"
device.buffering.fragment_size = "24000"
device.access_mode = "mmap+timer"
device.description = "Internes Audio"
device.icon_name = "audio-card-pci"
Formats:
pcm
Sink #1
State: IDLE
Name: combined
Description: Simultaneous output to Internes Audio
Driver: module-combine-sink.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 17
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: combined.monitor
Latency: 0 usec, configured 200000 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.class = "filter"
device.description = "Simultaneous output to Internes Audio"
device.icon_name = "audio-card"
Formats:
pcm
Source #0
State: IDLE
Name: alsa_output.plug_dmixer.monitor
Description: Monitor of Internes Audio
Driver: module-alsa-sink.c
Sample Specification: s16le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 5
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.plug_dmixer
Latency: 0 usec, configured 250000 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Internes Audio"
device.class = "monitor"
device.icon_name = "audio-input-microphone"
Formats:
pcm
Source #1
State: IDLE
Name: combined.monitor
Description: Monitor Source of Simultaneous output to Internes Audio
Driver: module-combine-sink.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 17
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: combined
Latency: 0 usec, configured 200000 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor Source of Simultaneous output to Internes Audio"
device.class = "monitor"
device.icon_name = "audio-input-microphone"
Formats:
pcm
Sink Input #0
Driver: module-combine-sink.c
Owner Module: 17
Client: n/a
Sink: 0
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Format: pcm, format.sample_format = "\"s16le\"" format.rate = "44100" format.channels = "2" format.channel_map = "\"front-left,front-right\""
Corked: no
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 0 usec
Sink Latency: 160317 usec
Resample method: trivial
Properties:
media.name = "Simultaneous output on Internes Audio"
media.role = "filter"
module-stream-restore.id = "sink-input-by-media-role:filter"
Client #0
Driver: module-systemd-login.c
Owner Module: 21
Properties:
application.name = "Login Session 5"
systemd-login.session = "5"
Client #1
Driver: protocol-native.c
Owner Module: 11
Properties:
application.name = "Iceweasel"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "30"
application.icon_name = "iceweasel"
application.version = "44.0.2"
application.process.id = "16610"
application.process.user = "jakob"
application.process.host = "aldebaran"
application.process.binary = "iceweasel"
window.x11.display = ":0"
application.language = "de_AT.utf8"
application.process.machine_id = "fd7f9c09b97e443fae8b9689497a0961"
application.process.session_id = "5"
Client #4
Driver: protocol-native.c
Owner Module: 11
Properties:
application.name = "pactl"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "30"
application.process.id = "20216"
application.process.user = "jakob"
application.process.host = "aldebaran"
application.process.binary = "pactl"
application.language = "C"
window.x11.display = ":0"
application.process.machine_id = "fd7f9c09b97e443fae8b9689497a0961"
application.process.session_id = "5"
-------------- next part --------------
Server String: /run/user/1000/pulse/native
Library Protocol Version: 30
Server Protocol Version: 30
Is Local: yes
Client Index: 5
Tile Size: 65472
User Name: jakob
Host Name: aldebaran
Server Name: pulseaudio
Server Version: 8.0
Default Sample Specification: s16le 2ch 44100Hz
Default Channel Map: front-left,front-right
Default Sink: alsa_output.plug_dmixer
Default Source: alsa_output.plug_dmixer.monitor
Cookie: 1605:5b32
More information about the pkg-pulseaudio-devel
mailing list