Bug#845938: pulseaudio: It doesn't since last update of Debian Testing (11-05-2017)
Bertrand Pinlet
tramberlimpe at free.fr
Fri May 12 12:13:15 UTC 2017
Package: pulseaudio
Version: 10.0-1
Followup-For: Bug #845938
Dear Maintainer,
* What led up to the situation?
-- Package-specific info:
File '/etc/default/pulseaudio' does not exist
-- System Information:
Debian Release: 9.0
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental')
Architecture: amd64
(x86_64)
Kernel: Linux 4.9.0-3-amd64 (SMP w/4 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages pulseaudio depends on:
ii adduser 3.115
ii libasound2 1.1.3-5
ii libasound2-plugins 1.1.1-1
ii libc6 2.24-10
ii libcap2 1:2.25-1
ii libdbus-1-3 1.10.18-1
ii libgcc1 1:6.3.0-17
ii libice6 2:1.0.9-2
ii libltdl7 2.4.6-2
ii liborc-0.4-0 1:0.4.26-2
ii libpulse0 10.0-1
ii libsm6 2:1.2.2-1+b3
ii libsndfile1 1.0.27-2
ii libsoxr0 0.1.2-2
ii libspeexdsp1 1.2~rc1.2-1+b2
ii libstdc++6 6.3.0-17
ii libsystemd0 232-23
ii libtdb1 1.3.11-2
ii libudev1 232-23
ii libwebrtc-audio-processing1 0.3-1
ii libx11-6 2:1.6.4-3
ii libx11-xcb1 2:1.6.4-3
ii libxcb1 1.12-1
ii libxtst6 2:1.2.3-1
ii lsb-base 9.20161125
ii pulseaudio-utils 10.0-1
Versions of packages pulseaudio recommends:
ii rtkit 0.11-4+b1
Versions of packages pulseaudio suggests:
pn paman <none>
pn paprefs <none>
ii pavucontrol 3.0-3+b3
pn pavumeter <none>
ii udev 232-23
-- Configuration Files:
/etc/pulse/default.pa changed:
.fail
load-module module-switch-on-connect
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
load-module module-augment-properties
load-module module-switch-on-port-available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
load-module module-detect
.endif
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif
.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
.ifexists module-gconf.so
.nofail
load-module module-gconf
.fail
.endif
load-module module-default-device-restore
load-module module-rescue-streams
load-module module-always-sink
load-module module-intended-roles
load-module module-suspend-on-idle
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif
load-module module-position-event-sounds
load-module module-role-cork
load-module module-filter-heuristics
load-module module-filter-apply
-- no debconf information
-------------- next part --------------
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; default-sink =
; default-source =
; default-server =
; default-dbus-server =
; autospawn = yes
; daemon-binary = /usr/bin/pulseaudio
; extra-arguments = --log-target=syslog
; cookie-file =
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; auto-connect-localhost = no
; auto-connect-display = no
-------------- next part --------------
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; enable-memfd = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; lock-memory = no
; cpu-limit = no
; high-priority = yes
; nice-level = -11
; realtime-scheduling = yes
; realtime-priority = 5
; exit-idle-time = 20
; scache-idle-time = 20
; dl-search-path = (depends on architecture)
; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa
; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0
; resample-method = speex-float-1
; enable-remixing = yes
; enable-lfe-remixing = no
; lfe-crossover-freq = 0
; flat-volumes = yes
; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 200000
; default-sample-format = s16le
; default-sample-rate = 44100
; alternate-sample-rate = 48000
; default-sample-channels = 2
; default-channel-map = front-left,front-right
; default-fragments = 4
; default-fragment-size-msec = 25
; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0
-------------- next part --------------
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)
.fail
### Bluetooth A2DP sink
load-module module-switch-on-connect
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev support)
load-module module-detect
.endif
### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif
### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif
.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish
### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv
### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor
### Load additional modules from GConf settings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists module-gconf.so
.nofail
load-module module-gconf
.fail
.endif
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Honour intended role device property
load-module module-intended-roles
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif
### Enable positioned event sounds
load-module module-position-event-sounds
### Cork music/video streams when a phone stream is active
load-module module-role-cork
### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply
### Make some devices default
#set-default-sink output
#set-default-source input
-------------- next part --------------
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started in system
# mode.
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev/hal support)
load-module module-detect
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Automatically restore the volume of streams and devices
load-module module-stream-restore
load-module module-device-restore
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### Enable positioned event sounds
load-module module-position-event-sounds
-------------- next part --------------
default
Playback/recording through the PulseAudio sound server
null
Discard all samples (playback) or generate zero samples (capture)
sysdefault:CARD=PCH
HDA Intel PCH, ALC269VC Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VC Analog
Front speakers
surround21:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VC Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VC Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VC Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VC Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VC Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VC Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=PCH,DEV=0
HDA Intel PCH, HDMI 0
HDMI Audio Output
hdmi:CARD=PCH,DEV=1
HDA Intel PCH, HDMI 1
HDMI Audio Output
hdmi:CARD=PCH,DEV=2
HDA Intel PCH, HDMI 2
HDMI Audio Output
dmix:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VC Analog
Direct sample mixing device
dmix:CARD=PCH,DEV=3
HDA Intel PCH, HDMI 0
Direct sample mixing device
dmix:CARD=PCH,DEV=7
HDA Intel PCH, HDMI 1
Direct sample mixing device
dmix:CARD=PCH,DEV=8
HDA Intel PCH, HDMI 2
Direct sample mixing device
dsnoop:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VC Analog
Direct sample snooping device
dsnoop:CARD=PCH,DEV=3
HDA Intel PCH, HDMI 0
Direct sample snooping device
dsnoop:CARD=PCH,DEV=7
HDA Intel PCH, HDMI 1
Direct sample snooping device
dsnoop:CARD=PCH,DEV=8
HDA Intel PCH, HDMI 2
Direct sample snooping device
hw:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VC Analog
Direct hardware device without any conversions
hw:CARD=PCH,DEV=3
HDA Intel PCH, HDMI 0
Direct hardware device without any conversions
hw:CARD=PCH,DEV=7
HDA Intel PCH, HDMI 1
Direct hardware device without any conversions
hw:CARD=PCH,DEV=8
HDA Intel PCH, HDMI 2
Direct hardware device without any conversions
plughw:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VC Analog
Hardware device with all software conversions
plughw:CARD=PCH,DEV=3
HDA Intel PCH, HDMI 0
Hardware device with all software conversions
plughw:CARD=PCH,DEV=7
HDA Intel PCH, HDMI 1
Hardware device with all software conversions
plughw:CARD=PCH,DEV=8
HDA Intel PCH, HDMI 2
Hardware device with all software conversions
-------------- next part --------------
Module #0
Name: module-switch-on-connect
Argument:
Usage counter: n/a
Properties:
module.author = "Michael Terry"
module.description = "When a sink/source is added, switch to it or conditionally switch to it"
module.version = "10.0"
Module #1
Name: module-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "10.0"
Module #2
Name: module-stream-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "10.0"
Module #3
Name: module-card-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "10.0"
Module #4
Name: module-augment-properties
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "10.0"
Module #5
Name: module-switch-on-port-available
Argument:
Usage counter: n/a
Properties:
Module #6
Name: module-udev-detect
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load matching drivers"
module.version = "10.0"
Module #7
Name: module-alsa-card
Argument: device_id="0" name="pci-0000_00_1f.3" card_name="alsa_card.pci-0000_00_1f.3" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"
Usage counter: 3
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "10.0"
Module #8
Name: module-bluetooth-policy
Argument:
Usage counter: n/a
Properties:
module.author = "Fr?d?ric Dalleau, Pali Roh?r"
module.description = "Policy module to make using bluetooth devices out-of-the-box easier"
module.version = "10.0"
Module #9
Name: module-bluetooth-discover
Argument:
Usage counter: n/a
Properties:
module.author = "Jo?o Paulo Rechi Vita"
module.description = "Detect available Bluetooth daemon and load the corresponding discovery module"
module.version = "10.0"
Module #10
Name: module-bluez5-discover
Argument:
Usage counter: n/a
Properties:
module.author = "Jo?o Paulo Rechi Vita"
module.description = "Detect available BlueZ 5 Bluetooth audio devices and load BlueZ 5 Bluetooth audio drivers"
module.version = "10.0"
Module #11
Name: module-native-protocol-unix
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "10.0"
Module #12
Name: module-default-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink and source"
module.version = "10.0"
Module #13
Name: module-rescue-streams
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to move its streams to the default sink/source"
module.version = "10.0"
Module #14
Name: module-always-sink
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Garde toujours au moins une destination m?me si elle est vide"
module.version = "10.0"
Module #15
Name: module-intended-roles
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based on intended roles of devices"
module.version = "10.0"
Module #16
Name: module-suspend-on-idle
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long, suspend it"
module.version = "10.0"
Module #17
Name: module-console-kit
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each ConsoleKit session of this user"
module.version = "10.0"
Module #18
Name: module-systemd-login
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of this user"
module.version = "10.0"
Module #19
Name: module-position-event-sounds
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
module.version = "10.0"
Module #20
Name: module-role-cork
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles while others exist"
module.version = "10.0"
Module #21
Name: module-filter-heuristics
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "10.0"
Module #22
Name: module-filter-apply
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when needed"
module.version = "10.0"
Module #24
Name: module-bluez5-device
Argument: path=/org/bluez/hci0/dev_B8_69_C2_24_D7_DA
Usage counter: 4
Properties:
module.author = "Jo?o Paulo Rechi Vita"
module.description = "BlueZ 5 Bluetooth audio sink and source"
module.version = "10.0"
Sink #0
State: IDLE
Name: alsa_output.pci-0000_00_1f.3.analog-stereo
Description: Audio interne St?r?o analogique
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 62256 / 95% / -1.34 dB, front-right: 62256 / 95% / -1.34 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_00_1f.3.analog-stereo.monitor
Latency: 36206 usec, configured 40000 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC269VC Analog"
alsa.id = "ALC269VC Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xdf320000 irq 133"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1f.3"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "9d70"
device.product.name = "Sunrise Point-LP HD Audio"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "St?r?o analogique"
device.description = "Audio interne St?r?o analogique"
alsa.mixer_name = "Realtek ALC269VC"
alsa.components = "HDA:10ec0269,15582426,00100202 HDA:80862809,80860101,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-output-speaker: Speakers (priority: 10000)
analog-output-headphones: Casques analogiques (priority: 9000, not available)
Active Port: analog-output-speaker
Formats:
pcm
Sink #2
State: RUNNING
Name: bluez_sink.B8_69_C2_24_D7_DA.headset_head_unit
Description: SRS-X11
Driver: module-bluez5-device.c
Sample Specification: s16le 1ch 8000Hz
Channel Map: mono
Owner Module: 24
Mute: no
Volume: mono: 65536 / 100%
balance 0.00
Base Volume: 65536 / 100%
Monitor Source: bluez_sink.B8_69_C2_24_D7_DA.headset_head_unit.monitor
Latency: 23394 usec, configured 128000 usec
Flags: HARDWARE HW_VOLUME_CTRL LATENCY
Properties:
bluetooth.protocol = "headset_head_unit"
device.intended_roles = "phone"
device.description = "SRS-X11"
device.string = "B8:69:C2:24:D7:DA"
device.api = "bluez"
device.class = "sound"
device.bus = "bluetooth"
device.form_factor = "speaker"
bluez.path = "/org/bluez/hci0/dev_B8_69_C2_24_D7_DA"
bluez.class = "0x240414"
bluez.alias = "SRS-X11"
device.icon_name = "audio-speakers-bluetooth"
Ports:
speaker-output: Haut-parleur (priority: 0)
Active Port: speaker-output
Formats:
pcm
Source #0
State: RUNNING
Name: alsa_output.pci-0000_00_1f.3.analog-stereo.monitor
Description: Monitor of Audio interne St?r?o analogique
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_00_1f.3.analog-stereo
Latency: 0 usec, configured 40000 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Audio interne St?r?o analogique"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xdf320000 irq 133"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1f.3"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "9d70"
device.product.name = "Sunrise Point-LP HD Audio"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formats:
pcm
Source #1
State: RUNNING
Name: alsa_input.pci-0000_00_1f.3.analog-stereo
Description: Audio interne St?r?o analogique
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 13878 / 21% / -40.45 dB, front-right: 13878 / 21% / -40.45 dB
balance 0.00
Base Volume: 6554 / 10% / -60.00 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 40000 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC269VC Analog"
alsa.id = "ALC269VC Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xdf320000 irq 133"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1f.3"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "9d70"
device.product.name = "Sunrise Point-LP HD Audio"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "St?r?o analogique"
device.description = "Audio interne St?r?o analogique"
alsa.mixer_name = "Realtek ALC269VC"
alsa.components = "HDA:10ec0269,15582426,00100202 HDA:80862809,80860101,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-input-internal-mic: Microphone interne (priority: 8900)
analog-input-mic: Microphone (priority: 8700, not available)
Active Port: analog-input-internal-mic
Formats:
pcm
Source #4
State: RUNNING
Name: bluez_sink.B8_69_C2_24_D7_DA.headset_head_unit.monitor
Description: Monitor of SRS-X11
Driver: module-bluez5-device.c
Sample Specification: s16le 1ch 8000Hz
Channel Map: mono
Owner Module: 24
Mute: no
Volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: bluez_sink.B8_69_C2_24_D7_DA.headset_head_unit
Latency: 0 usec, configured 128000 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of SRS-X11"
device.class = "monitor"
device.string = "B8:69:C2:24:D7:DA"
device.api = "bluez"
device.bus = "bluetooth"
device.form_factor = "speaker"
bluez.path = "/org/bluez/hci0/dev_B8_69_C2_24_D7_DA"
bluez.class = "0x240414"
bluez.alias = "SRS-X11"
device.icon_name = "audio-speakers-bluetooth"
Formats:
pcm
Source #5
State: RUNNING
Name: bluez_source.B8_69_C2_24_D7_DA.headset_head_unit
Description: SRS-X11
Driver: module-bluez5-device.c
Sample Specification: s16le 1ch 8000Hz
Channel Map: mono
Owner Module: 24
Mute: no
Volume: mono: 26215 / 40%
balance 0.00
Base Volume: 65536 / 100%
Monitor of Sink: n/a
Latency: 32794 usec, configured 28000 usec
Flags: HARDWARE HW_VOLUME_CTRL LATENCY
Properties:
bluetooth.protocol = "headset_head_unit"
device.intended_roles = "phone"
device.description = "SRS-X11"
device.string = "B8:69:C2:24:D7:DA"
device.api = "bluez"
device.class = "sound"
device.bus = "bluetooth"
device.form_factor = "speaker"
bluez.path = "/org/bluez/hci0/dev_B8_69_C2_24_D7_DA"
bluez.class = "0x240414"
bluez.alias = "SRS-X11"
device.icon_name = "audio-speakers-bluetooth"
Ports:
speaker-input: Bluetooth Input (priority: 0)
Active Port: speaker-input
Formats:
pcm
Sink Input #1
Driver: protocol-native.c
Owner Module: 11
Client: 8
Sink: 2
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Format: pcm, format.sample_format = "\"s16le\"" format.rate = "44100" format.channels = "2" format.channel_map = "\"front-left,front-right\""
Corked: no
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 231995 usec
Sink Latency: 23177 usec
Resample method: speex-float-1
Properties:
media.name = "ALSA Playback"
application.name = "ALSA plug-in [mocp]"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.process.id = "1148"
application.process.user = "tramber"
application.process.host = "tram63rlimpe"
application.process.binary = "mocp"
application.language = "fr_FR.utf8"
window.x11.display = ":0"
application.process.machine_id = "ad286069ab224006830f19da9dca5dc4"
application.process.session_id = "2"
module-stream-restore.id = "sink-input-by-application-name:ALSA plug-in [mocp]"
Source Output #6
Driver: protocol-native.c
Owner Module: 11
Client: 12
Source: 0
Sample Specification: float32le 1ch 25Hz
Channel Map: mono
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\""
Corked: no
Mute: no
Volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 19795 usec
Source Latency: 0 usec
Resample method: peaks
Properties:
media.name = "D?tection de cr?tes"
application.name = "Contr?le du volume PulseAudio"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "3.0"
application.process.id = "1737"
application.process.user = "tramber"
application.process.host = "tram63rlimpe"
application.process.binary = "pavucontrol"
application.language = "fr_FR.utf8"
window.x11.display = ":0"
application.process.machine_id = "ad286069ab224006830f19da9dca5dc4"
application.process.session_id = "2"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
Source Output #7
Driver: protocol-native.c
Owner Module: 11
Client: 12
Source: 1
Sample Specification: float32le 1ch 25Hz
Channel Map: mono
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\""
Corked: no
Mute: no
Volume: mono: 13878 / 21% / -40.45 dB
balance 0.00
Buffer Latency: 0 usec
Source Latency: 0 usec
Resample method: peaks
Properties:
media.name = "D?tection de cr?tes"
application.name = "Contr?le du volume PulseAudio"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "3.0"
application.process.id = "1737"
application.process.user = "tramber"
application.process.host = "tram63rlimpe"
application.process.binary = "pavucontrol"
application.language = "fr_FR.utf8"
window.x11.display = ":0"
application.process.machine_id = "ad286069ab224006830f19da9dca5dc4"
application.process.session_id = "2"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
Source Output #12
Driver: protocol-native.c
Owner Module: 11
Client: 12
Source: 4
Sample Specification: float32le 1ch 25Hz
Channel Map: mono
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\""
Corked: no
Mute: no
Volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 0 usec
Source Latency: 0 usec
Resample method: peaks
Properties:
media.name = "D?tection de cr?tes"
application.name = "Contr?le du volume PulseAudio"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "3.0"
application.process.id = "1737"
application.process.user = "tramber"
application.process.host = "tram63rlimpe"
application.process.binary = "pavucontrol"
application.language = "fr_FR.utf8"
window.x11.display = ":0"
application.process.machine_id = "ad286069ab224006830f19da9dca5dc4"
application.process.session_id = "2"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
Source Output #13
Driver: protocol-native.c
Owner Module: 11
Client: 12
Source: 4
Sample Specification: float32le 1ch 25Hz
Channel Map: mono
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\""
Corked: no
Mute: no
Volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 0 usec
Source Latency: 0 usec
Resample method: peaks
Properties:
media.name = "D?tection de cr?tes"
application.name = "Contr?le du volume PulseAudio"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "3.0"
application.process.id = "1737"
application.process.user = "tramber"
application.process.host = "tram63rlimpe"
application.process.binary = "pavucontrol"
application.language = "fr_FR.utf8"
window.x11.display = ":0"
application.process.machine_id = "ad286069ab224006830f19da9dca5dc4"
application.process.session_id = "2"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
Source Output #14
Driver: protocol-native.c
Owner Module: 11
Client: 12
Source: 5
Sample Specification: float32le 1ch 25Hz
Channel Map: mono
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\""
Corked: no
Mute: no
Volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 0 usec
Source Latency: 32953 usec
Resample method: peaks
Properties:
media.name = "D?tection de cr?tes"
application.name = "Contr?le du volume PulseAudio"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "3.0"
application.process.id = "1737"
application.process.user = "tramber"
application.process.host = "tram63rlimpe"
application.process.binary = "pavucontrol"
application.language = "fr_FR.utf8"
window.x11.display = ":0"
application.process.machine_id = "ad286069ab224006830f19da9dca5dc4"
application.process.session_id = "2"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
Client #0
Driver: module-systemd-login.c
Owner Module: 18
Properties:
application.name = "Login Session 2"
systemd-login.session = "2"
Client #1
Driver: protocol-native.c
Owner Module: 11
Properties:
application.name = "i3status"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.id = "org.i3wm"
application.version = "2.11 (2017-01-21)"
application.process.id = "1140"
application.process.user = "tramber"
application.process.host = "tram63rlimpe"
application.process.binary = "i3status"
application.language = "fr_FR.utf8"
window.x11.display = ":0"
application.process.machine_id = "ad286069ab224006830f19da9dca5dc4"
application.process.session_id = "2"
Client #5
Driver: protocol-native.c
Owner Module: 11
Properties:
application.name = "ALSA plug-in [mocp]"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.process.id = "1148"
application.process.user = "tramber"
application.process.host = "tram63rlimpe"
application.process.binary = "mocp"
application.language = "fr_FR.utf8"
window.x11.display = ":0"
application.process.machine_id = "ad286069ab224006830f19da9dca5dc4"
application.process.session_id = "2"
Client #8
Driver: protocol-native.c
Owner Module: 11
Properties:
application.name = "ALSA plug-in [mocp]"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.process.id = "1148"
application.process.user = "tramber"
application.process.host = "tram63rlimpe"
application.process.binary = "mocp"
application.language = "fr_FR.utf8"
window.x11.display = ":0"
application.process.machine_id = "ad286069ab224006830f19da9dca5dc4"
application.process.session_id = "2"
Client #10
Driver: protocol-native.c
Owner Module: 11
Properties:
application.name = "Blueman"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.process.id = "1483"
application.process.user = "tramber"
application.process.host = "tram63rlimpe"
application.process.binary = "python3.5"
application.language = "fr_FR.utf8"
window.x11.display = ":0"
application.process.machine_id = "ad286069ab224006830f19da9dca5dc4"
application.process.session_id = "2"
application.icon_name = "/usr/share/pixmaps/python3.5.xpm"
Client #12
Driver: protocol-native.c
Owner Module: 11
Properties:
application.name = "Contr?le du volume PulseAudio"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "3.0"
application.process.id = "1737"
application.process.user = "tramber"
application.process.host = "tram63rlimpe"
application.process.binary = "pavucontrol"
application.language = "fr_FR.utf8"
window.x11.display = ":0"
application.process.machine_id = "ad286069ab224006830f19da9dca5dc4"
application.process.session_id = "2"
Client #15
Driver: protocol-native.c
Owner Module: 11
Properties:
application.name = "pactl"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.process.id = "1976"
application.process.user = "tramber"
application.process.host = "tram63rlimpe"
application.process.binary = "pactl"
application.language = "C"
window.x11.display = ":0"
application.process.machine_id = "ad286069ab224006830f19da9dca5dc4"
application.process.session_id = "2"
Card #0
Name: alsa_card.pci-0000_00_1f.3
Driver: module-alsa-card.c
Owner Module: 7
Properties:
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xdf320000 irq 133"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1f.3"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "9d70"
device.product.name = "Sunrise Point-LP HD Audio"
device.form_factor = "internal"
device.string = "0"
device.description = "Audio interne"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
input:analog-stereo: St?r?o analogique Input (sinks: 0, sources: 1, priority: 60, available: yes)
output:analog-stereo: St?r?o analogique Output (sinks: 1, sources: 0, priority: 6000, available: yes)
output:analog-stereo+input:analog-stereo: Duplex st?r?o analogique (sinks: 1, sources: 1, priority: 6060, available: yes)
output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5400, available: no)
output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Output + St?r?o analogique Input (sinks: 1, sources: 1, priority: 5460, available: yes)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 300, available: no)
output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) Output + St?r?o analogique Input (sinks: 1, sources: 1, priority: 360, available: yes)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (sinks: 1, sources: 0, priority: 300, available: no)
output:hdmi-surround71+input:analog-stereo: Digital Surround 7.1 (HDMI) Output + St?r?o analogique Input (sinks: 1, sources: 1, priority: 360, available: yes)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5200, available: no)
output:hdmi-stereo-extra1+input:analog-stereo: Digital Stereo (HDMI 2) Output + St?r?o analogique Input (sinks: 1, sources: 1, priority: 5260, available: yes)
output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 100, available: no)
output:hdmi-surround-extra1+input:analog-stereo: Digital Surround 5.1 (HDMI 2) Output + St?r?o analogique Input (sinks: 1, sources: 1, priority: 160, available: yes)
output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 100, available: no)
output:hdmi-surround71-extra1+input:analog-stereo: Digital Surround 7.1 (HDMI 2) Output + St?r?o analogique Input (sinks: 1, sources: 1, priority: 160, available: yes)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5200, available: no)
output:hdmi-stereo-extra2+input:analog-stereo: Digital Stereo (HDMI 3) Output + St?r?o analogique Input (sinks: 1, sources: 1, priority: 5260, available: yes)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 100, available: no)
output:hdmi-surround-extra2+input:analog-stereo: Digital Surround 5.1 (HDMI 3) Output + St?r?o analogique Input (sinks: 1, sources: 1, priority: 160, available: yes)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 100, available: no)
output:hdmi-surround71-extra2+input:analog-stereo: Digital Surround 7.1 (HDMI 3) Output + St?r?o analogique Input (sinks: 1, sources: 1, priority: 160, available: yes)
off: ?teint (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:analog-stereo+input:analog-stereo
Ports:
analog-input-internal-mic: Microphone interne (priority: 8900, latency offset: 0 usec)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71+input:analog-stereo, output:hdmi-stereo-extra1+input:analog-stereo, output:hdmi-surround-extra1+input:analog-stereo, output:hdmi-surround71-extra1+input:analog-stereo, output:hdmi-stereo-extra2+input:analog-stereo, output:hdmi-surround-extra2+input:analog-stereo, output:hdmi-surround71-extra2+input:analog-stereo
analog-input-mic: Microphone (priority: 8700, latency offset: 0 usec, not available)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71+input:analog-stereo, output:hdmi-stereo-extra1+input:analog-stereo, output:hdmi-surround-extra1+input:analog-stereo, output:hdmi-surround71-extra1+input:analog-stereo, output:hdmi-stereo-extra2+input:analog-stereo, output:hdmi-surround-extra2+input:analog-stereo, output:hdmi-surround71-extra2+input:analog-stereo
analog-output-speaker: Speakers (priority: 10000, latency offset: 0 usec)
Properties:
device.icon_name = "audio-speakers"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
analog-output-headphones: Casques analogiques (priority: 9000, latency offset: 0 usec, not available)
Properties:
device.icon_name = "audio-headphones"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
hdmi-output-0: HDMI / DisplayPort (priority: 5900, latency offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71, output:hdmi-surround71+input:analog-stereo
hdmi-output-1: HDMI / DisplayPort 2 (priority: 5800, latency offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-stereo-extra1+input:analog-stereo, output:hdmi-surround-extra1, output:hdmi-surround-extra1+input:analog-stereo, output:hdmi-surround71-extra1, output:hdmi-surround71-extra1+input:analog-stereo
hdmi-output-2: HDMI / DisplayPort 3 (priority: 5700, latency offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-stereo-extra2+input:analog-stereo, output:hdmi-surround-extra2, output:hdmi-surround-extra2+input:analog-stereo, output:hdmi-surround71-extra2, output:hdmi-surround71-extra2+input:analog-stereo
Card #2
Name: bluez_card.B8_69_C2_24_D7_DA
Driver: module-bluez5-device.c
Owner Module: 24
Properties:
device.description = "SRS-X11"
device.string = "B8:69:C2:24:D7:DA"
device.api = "bluez"
device.class = "sound"
device.bus = "bluetooth"
device.form_factor = "speaker"
bluez.path = "/org/bluez/hci0/dev_B8_69_C2_24_D7_DA"
bluez.class = "0x240414"
bluez.alias = "SRS-X11"
device.icon_name = "audio-speakers-bluetooth"
Profiles:
headset_head_unit: Headset Head Unit (HSP/HFP) (sinks: 1, sources: 1, priority: 20, available: yes)
a2dp_sink: High Fidelity Playback (A2DP Sink) (sinks: 1, sources: 0, priority: 10, available: no)
off: ?teint (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: headset_head_unit
Ports:
speaker-output: Haut-parleur (priority: 0, latency offset: 0 usec)
Part of profile(s): headset_head_unit, a2dp_sink
speaker-input: Bluetooth Input (priority: 0, latency offset: 0 usec)
Part of profile(s): headset_head_unit
-------------- next part --------------
Server String: /run/user/1000/pulse/native
Library Protocol Version: 32
Server Protocol Version: 32
Is Local: yes
Client Index: 16
Tile Size: 65472
User Name: tramber
Host Name: tram63rlimpe
Server Name: pulseaudio
Server Version: 10.0
Default Sample Specification: s16le 2ch 44100Hz
Default Channel Map: front-left,front-right
Default Sink: bluez_sink.B8_69_C2_24_D7_DA.headset_head_unit
Default Source: bluez_source.B8_69_C2_24_D7_DA.headset_head_unit
Cookie: f3de:7614
More information about the pkg-pulseaudio-devel
mailing list