Bug#935047: pulseaudio: regularly stops producing sound over USB interface
Adrian Heine
debian at adrianheine.de
Mon Aug 19 23:17:16 BST 2019
Thanks for your feedback!
I attached the log and the output of pactl list.
Time table:
23:50:06 start
23:50:53 attached interface
23:51:28 (I guess) pactl-list.working
23:59:42 (or a bit later) sound died
00:00:59 pactl-list.broken
00:10:11 disconnect interface
00:10:49 reattached interface
00:15:06 (this is precise) sound died again
-------------- next part --------------
Module #0
Name: module-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "12.2"
Module #1
Name: module-stream-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "12.2"
Module #2
Name: module-card-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "12.2"
Module #3
Name: module-augment-properties
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "12.2"
Module #4
Name: module-switch-on-port-available
Argument:
Usage counter: n/a
Properties:
module.author = "David Henningsson"
module.description = "Switches ports and profiles when devices are plugged/unplugged"
module.version = "12.2"
Module #5
Name: module-udev-detect
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load matching drivers"
module.version = "12.2"
Module #6
Name: module-alsa-card
Argument: device_id="0" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "12.2"
Module #7
Name: module-bluetooth-policy
Argument:
Usage counter: n/a
Properties:
module.author = "Frédéric Dalleau, Pali Rohár"
module.description = "Policy module to make using bluetooth devices out-of-the-box easier"
module.version = "12.2"
Module #8
Name: module-bluetooth-discover
Argument:
Usage counter: n/a
Properties:
module.author = "João Paulo Rechi Vita"
module.description = "Detect available Bluetooth daemon and load the corresponding discovery module"
module.version = "12.2"
Module #9
Name: module-bluez5-discover
Argument:
Usage counter: n/a
Properties:
module.author = "João Paulo Rechi Vita"
module.description = "Detect available BlueZ 5 Bluetooth audio devices and load BlueZ 5 Bluetooth audio drivers"
module.version = "12.2"
Module #10
Name: module-native-protocol-unix
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "12.2"
Module #11
Name: module-default-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink and source"
module.version = "12.2"
Module #12
Name: module-rescue-streams
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to move its streams to the default sink/source"
module.version = "12.2"
Module #13
Name: module-always-sink
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Always keeps at least one sink loaded even if it's a null one"
module.version = "12.2"
Module #14
Name: module-intended-roles
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based on intended roles of devices"
module.version = "12.2"
Module #15
Name: module-suspend-on-idle
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long, suspend it"
module.version = "12.2"
Module #16
Name: module-console-kit
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each ConsoleKit session of this user"
module.version = "12.2"
Module #17
Name: module-systemd-login
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of this user"
module.version = "12.2"
Module #18
Name: module-position-event-sounds
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
module.version = "12.2"
Module #19
Name: module-role-cork
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles while others exist"
module.version = "12.2"
Module #20
Name: module-filter-heuristics
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "12.2"
Module #21
Name: module-filter-apply
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when needed"
module.version = "12.2"
Module #22
Name: module-alsa-card
Argument: device_id="1" name="usb-Focusrite_Scarlett_Solo_USB-00" card_name="alsa_card.usb-Focusrite_Scarlett_Solo_USB-00" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"
Usage counter: 1
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "12.2"
Sink #0
State: SUSPENDED
Name: alsa_output.pci-0000_00_1b.0.analog-stereo
Description: Built-in Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: no
Volume: front-left: 18352 / 28% / -33,17 dB, front-right: 18352 / 28% / -33,17 dB
balance 0,00
Base Volume: 65536 / 100% / 0,00 dB
Monitor Source: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "CX20590 Analog"
alsa.id = "CX20590 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf2a20000 irq 41"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1c20"
device.product.name = "6 Series/C200 Series Chipset Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Conexant CX20590"
alsa.components = "HDA:14f1506e,17aa21d2,00100003"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-output-speaker: Speakers (priority: 10000)
analog-output-headphones: Headphones (priority: 9000, not available)
Active Port: analog-output-speaker
Formats:
pcm
Sink #1
State: RUNNING
Name: alsa_output.usb-Focusrite_Scarlett_Solo_USB-00.analog-stereo
Description: Scarlett Solo USB Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s32le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 22
Mute: no
Volume: front-left: 22284 / 34% / -28,11 dB, front-right: 22284 / 34% / -28,11 dB
balance 0,00
Base Volume: 65536 / 100% / 0,00 dB
Monitor Source: alsa_output.usb-Focusrite_Scarlett_Solo_USB-00.analog-stereo.monitor
Latency: 60830 usec, configured 60000 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "32"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "Scarlett Solo USB"
alsa.long_card_name = "Focusrite Scarlett Solo USB at usb-0000:0d:00.0-1, high speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:0d:00.0-usb-0:1:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:1c.4/0000:0d:00.0/usb2/2-1/2-1:1.0/sound/card1"
udev.id = "usb-Focusrite_Scarlett_Solo_USB-00"
device.bus = "usb"
device.vendor.id = "1235"
device.vendor.name = "Focusrite-Novation"
device.product.id = "8205"
device.product.name = "Scarlett Solo USB"
device.serial = "Focusrite_Scarlett_Solo_USB"
device.string = "front:1"
device.buffering.buffer_size = "705600"
device.buffering.fragment_size = "352800"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Scarlett Solo USB Analog Stereo"
alsa.components = "USB1235:8205"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
Ports:
analog-output: Analog Output (priority: 9900)
Active Port: analog-output
Formats:
pcm
Source #0
State: SUSPENDED
Name: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Description: Monitor of Built-in Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: yes
Volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
Base Volume: 65536 / 100% / 0,00 dB
Monitor of Sink: alsa_output.pci-0000_00_1b.0.analog-stereo
Latency: 0 usec, configured 0 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Built-in Audio Analog Stereo"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf2a20000 irq 41"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1c20"
device.product.name = "6 Series/C200 Series Chipset Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formats:
pcm
Source #1
State: SUSPENDED
Name: alsa_input.pci-0000_00_1b.0.analog-stereo
Description: Built-in Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: yes
Volume: front-left: 18071 / 28% / -33,57 dB, front-right: 18071 / 28% / -33,57 dB
balance 0,00
Base Volume: 8250 / 13% / -54,00 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "CX20590 Analog"
alsa.id = "CX20590 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf2a20000 irq 41"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1c20"
device.product.name = "6 Series/C200 Series Chipset Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Conexant CX20590"
alsa.components = "HDA:14f1506e,17aa21d2,00100003"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-input-internal-mic: Internal Microphone (priority: 8900)
analog-input-mic: Microphone (priority: 8700, not available)
Active Port: analog-input-internal-mic
Formats:
pcm
Source #2
State: IDLE
Name: alsa_output.usb-Focusrite_Scarlett_Solo_USB-00.analog-stereo.monitor
Description: Monitor of Scarlett Solo USB Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s32le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 22
Mute: no
Volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
Base Volume: 65536 / 100% / 0,00 dB
Monitor of Sink: alsa_output.usb-Focusrite_Scarlett_Solo_USB-00.analog-stereo
Latency: 0 usec, configured 2000000 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Scarlett Solo USB Analog Stereo"
device.class = "monitor"
alsa.card = "1"
alsa.card_name = "Scarlett Solo USB"
alsa.long_card_name = "Focusrite Scarlett Solo USB at usb-0000:0d:00.0-1, high speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:0d:00.0-usb-0:1:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:1c.4/0000:0d:00.0/usb2/2-1/2-1:1.0/sound/card1"
udev.id = "usb-Focusrite_Scarlett_Solo_USB-00"
device.bus = "usb"
device.vendor.id = "1235"
device.vendor.name = "Focusrite-Novation"
device.product.id = "8205"
device.product.name = "Scarlett Solo USB"
device.serial = "Focusrite_Scarlett_Solo_USB"
device.string = "1"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
Formats:
pcm
Source #3
State: SUSPENDED
Name: alsa_input.usb-Focusrite_Scarlett_Solo_USB-00.analog-stereo
Description: Scarlett Solo USB Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s32le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 22
Mute: no
Volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
Base Volume: 65536 / 100% / 0,00 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "32"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "Scarlett Solo USB"
alsa.long_card_name = "Focusrite Scarlett Solo USB at usb-0000:0d:00.0-1, high speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:0d:00.0-usb-0:1:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:1c.4/0000:0d:00.0/usb2/2-1/2-1:1.0/sound/card1"
udev.id = "usb-Focusrite_Scarlett_Solo_USB-00"
device.bus = "usb"
device.vendor.id = "1235"
device.vendor.name = "Focusrite-Novation"
device.product.id = "8205"
device.product.name = "Scarlett Solo USB"
device.serial = "Focusrite_Scarlett_Solo_USB"
device.string = "front:1"
device.buffering.buffer_size = "705600"
device.buffering.fragment_size = "352800"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Scarlett Solo USB Analog Stereo"
alsa.components = "USB1235:8205"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
Ports:
analog-input: Analog Input (priority: 10000)
Active Port: analog-input
Formats:
pcm
Sink Input #0
Driver: protocol-native.c
Owner Module: 10
Client: 8
Sink: 1
Sample Specification: float32le 2ch 44100Hz
Channel Map: front-left,front-right
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "44100" format.channels = "2" format.channel_map = "\"front-left,front-right\""
Corked: no
Mute: no
Volume: front-left: 22284 / 34% / -28,11 dB, front-right: 22284 / 34% / -28,11 dB
balance 0,00
Buffer Latency: 54739 usec
Sink Latency: 60396 usec
Resample method: copy
Properties:
media.icon_name = "io.github.GnomeMpv"
media.name = "In meiner Erinnerung"
application.name = "io.github.GnomeMpv"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.process.id = "31665"
application.process.user = "adrian"
application.process.host = "katniss"
application.process.binary = "gnome-mpv"
application.icon_name = "io.github.GnomeMpv"
application.language = "en_US.utf8"
window.x11.display = ":0"
application.process.machine_id = "d268b608dbeca21392fe27e5000004d3"
application.process.session_id = "2"
module-stream-restore.id = "sink-input-by-application-name:io.github.GnomeMpv"
Client #0
Driver: module-systemd-login.c
Owner Module: 17
Properties:
application.name = "Login Session 2"
systemd-login.session = "2"
Client #1
Driver: protocol-native.c
Owner Module: 10
Properties:
application.name = "Thunderbird"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.icon_name = "thunderbird"
application.version = "60.8.0"
application.process.id = "2737"
application.process.user = "adrian"
application.process.host = "katniss"
application.process.binary = "thunderbird-bin"
application.language = "en_US.utf8"
window.x11.display = ":0"
application.process.machine_id = "d268b608dbeca21392fe27e5000004d3"
application.process.session_id = "2"
Client #2
Driver: protocol-native.c
Owner Module: 10
Properties:
application.name = "libcanberra"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.version = "0.30"
application.id = "org.freedesktop.libcanberra"
application.process.id = "1379"
application.process.user = "adrian"
application.process.host = "katniss"
application.process.binary = "gnome-settings-daemon"
application.language = "en_US.utf8"
window.x11.display = ":0"
application.process.machine_id = "d268b608dbeca21392fe27e5000004d3"
application.process.session_id = "2"
Client #3
Driver: protocol-native.c
Owner Module: 10
Properties:
application.name = "Firefox"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.icon_name = "firefox"
application.version = "68.0.2"
application.process.id = "2921"
application.process.user = "adrian"
application.process.host = "katniss"
application.process.binary = "firefox (deleted)"
application.language = "en_US.utf8"
window.x11.display = ":0"
application.process.machine_id = "d268b608dbeca21392fe27e5000004d3"
application.process.session_id = "2"
Client #4
Driver: protocol-native.c
Owner Module: 10
Properties:
application.name = "gnome-settings-daemon"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
window.x11.display = ":0"
window.x11.screen = "0"
application.process.id = "1379"
application.process.user = "adrian"
application.process.host = "katniss"
application.process.binary = "gnome-settings-daemon"
application.language = "en_US.utf8"
application.process.machine_id = "d268b608dbeca21392fe27e5000004d3"
application.process.session_id = "2"
Client #5
Driver: protocol-native.c
Owner Module: 10
Properties:
application.name = "GNOME Shell"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.id = "org.gnome.Shell"
application.icon_name = "start-here"
application.language = "en_US.utf8"
window.x11.screen = "0"
window.x11.display = ":0"
application.process.id = "1294"
application.process.user = "adrian"
application.process.host = "katniss"
application.process.binary = "gnome-shell"
application.process.machine_id = "d268b608dbeca21392fe27e5000004d3"
application.process.session_id = "2"
Client #6
Driver: protocol-native.c
Owner Module: 10
Properties:
application.name = "GNOME Shell Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "3.22.3"
application.process.id = "1294"
application.process.user = "adrian"
application.process.host = "katniss"
application.process.binary = "gnome-shell"
application.language = "en_US.utf8"
window.x11.display = ":0"
application.process.machine_id = "d268b608dbeca21392fe27e5000004d3"
application.process.session_id = "2"
Client #7
Driver: protocol-native.c
Owner Module: 10
Properties:
application.name = "GNOME Volume Control Media Keys"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "3.22.2"
application.process.id = "1379"
application.process.user = "adrian"
application.process.host = "katniss"
application.process.binary = "gnome-settings-daemon"
application.language = "en_US.utf8"
window.x11.display = ":0"
application.process.machine_id = "d268b608dbeca21392fe27e5000004d3"
application.process.session_id = "2"
Client #8
Driver: protocol-native.c
Owner Module: 10
Properties:
application.name = "io.github.GnomeMpv"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.process.id = "31665"
application.process.user = "adrian"
application.process.host = "katniss"
application.process.binary = "gnome-mpv"
application.icon_name = "io.github.GnomeMpv"
application.language = "en_US.utf8"
window.x11.display = ":0"
application.process.machine_id = "d268b608dbeca21392fe27e5000004d3"
application.process.session_id = "2"
Client #10
Driver: protocol-native.c
Owner Module: 10
Properties:
application.name = "pactl"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.process.id = "361"
application.process.user = "adrian"
application.process.host = "katniss"
application.process.binary = "pactl"
application.language = "en_US.utf8"
window.x11.display = ":0"
application.process.machine_id = "d268b608dbeca21392fe27e5000004d3"
application.process.session_id = "2"
Sample #0
Name: audio-volume-change
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Volume: (invalid)
balance 0,00
Duration: 0,1s
Size: 11,5 KiB
Lazy: no
Filename: n/a
Properties:
media.role = "event"
event.description = "volume changed through key press"
event.id = "audio-volume-change"
media.name = "audio-volume-change"
media.filename = "/usr/share//sounds/freedesktop/stereo/audio-volume-change.oga"
application.name = "libcanberra"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.version = "0.30"
application.id = "org.freedesktop.libcanberra"
application.process.id = "1379"
application.process.user = "adrian"
application.process.host = "katniss"
application.process.binary = "gnome-settings-daemon"
application.language = "en_US.utf8"
window.x11.display = ":0"
application.process.machine_id = "d268b608dbeca21392fe27e5000004d3"
application.process.session_id = "2"
Card #0
Name: alsa_card.pci-0000_00_1b.0
Driver: module-alsa-card.c
Owner Module: 6
Properties:
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf2a20000 irq 41"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1c20"
device.product.name = "6 Series/C200 Series Chipset Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "0"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: yes)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: yes)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:analog-stereo+input:analog-stereo
Ports:
analog-input-internal-mic: Internal Microphone (priority: 8900, latency offset: 0 usec)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo
analog-input-mic: Microphone (priority: 8700, latency offset: 0 usec, not available)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo
analog-output-speaker: Speakers (priority: 10000, latency offset: 0 usec)
Properties:
device.icon_name = "audio-speakers"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
analog-output-headphones: Headphones (priority: 9000, latency offset: 0 usec, not available)
Properties:
device.icon_name = "audio-headphones"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
Card #1
Name: alsa_card.usb-Focusrite_Scarlett_Solo_USB-00
Driver: module-alsa-card.c
Owner Module: 22
Properties:
alsa.card = "1"
alsa.card_name = "Scarlett Solo USB"
alsa.long_card_name = "Focusrite Scarlett Solo USB at usb-0000:0d:00.0-1, high speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:0d:00.0-usb-0:1:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:1c.4/0000:0d:00.0/usb2/2-1/2-1:1.0/sound/card1"
udev.id = "usb-Focusrite_Scarlett_Solo_USB-00"
device.bus = "usb"
device.vendor.id = "1235"
device.vendor.name = "Focusrite-Novation"
device.product.id = "8205"
device.product.name = "Scarlett Solo USB"
device.serial = "Focusrite_Scarlett_Solo_USB"
device.string = "1"
device.description = "Scarlett Solo USB"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
Profiles:
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: yes)
input:iec958-stereo: Digital Stereo (IEC958) Input (sinks: 0, sources: 1, priority: 55, available: yes)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: yes)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: yes)
output:analog-stereo+input:iec958-stereo: Analog Stereo Output + Digital Stereo (IEC958) Input (sinks: 1, sources: 1, priority: 6555, available: yes)
output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 5500, available: yes)
output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5565, available: yes)
output:iec958-stereo+input:iec958-stereo: Digital Stereo Duplex (IEC958) (sinks: 1, sources: 1, priority: 5555, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:analog-stereo+input:analog-stereo
Ports:
analog-input: Analog Input (priority: 10000, latency offset: 0 usec)
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:iec958-stereo+input:analog-stereo
iec958-stereo-input: Digital Input (S/PDIF) (priority: 0, latency offset: 0 usec)
Part of profile(s): input:iec958-stereo, output:analog-stereo+input:iec958-stereo, output:iec958-stereo+input:iec958-stereo
analog-output: Analog Output (priority: 9900, latency offset: 0 usec)
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-stereo+input:iec958-stereo
iec958-stereo-output: Digital Output (S/PDIF) (priority: 0, latency offset: 0 usec)
Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-stereo+input:iec958-stereo
-------------- next part --------------
Module #0
Name: module-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "12.2"
Module #1
Name: module-stream-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "12.2"
Module #2
Name: module-card-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "12.2"
Module #3
Name: module-augment-properties
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "12.2"
Module #4
Name: module-switch-on-port-available
Argument:
Usage counter: n/a
Properties:
module.author = "David Henningsson"
module.description = "Switches ports and profiles when devices are plugged/unplugged"
module.version = "12.2"
Module #5
Name: module-udev-detect
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load matching drivers"
module.version = "12.2"
Module #6
Name: module-alsa-card
Argument: device_id="0" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "12.2"
Module #7
Name: module-bluetooth-policy
Argument:
Usage counter: n/a
Properties:
module.author = "Frédéric Dalleau, Pali Rohár"
module.description = "Policy module to make using bluetooth devices out-of-the-box easier"
module.version = "12.2"
Module #8
Name: module-bluetooth-discover
Argument:
Usage counter: n/a
Properties:
module.author = "João Paulo Rechi Vita"
module.description = "Detect available Bluetooth daemon and load the corresponding discovery module"
module.version = "12.2"
Module #9
Name: module-bluez5-discover
Argument:
Usage counter: n/a
Properties:
module.author = "João Paulo Rechi Vita"
module.description = "Detect available BlueZ 5 Bluetooth audio devices and load BlueZ 5 Bluetooth audio drivers"
module.version = "12.2"
Module #10
Name: module-native-protocol-unix
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "12.2"
Module #11
Name: module-default-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink and source"
module.version = "12.2"
Module #12
Name: module-rescue-streams
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to move its streams to the default sink/source"
module.version = "12.2"
Module #13
Name: module-always-sink
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Always keeps at least one sink loaded even if it's a null one"
module.version = "12.2"
Module #14
Name: module-intended-roles
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based on intended roles of devices"
module.version = "12.2"
Module #15
Name: module-suspend-on-idle
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long, suspend it"
module.version = "12.2"
Module #16
Name: module-console-kit
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each ConsoleKit session of this user"
module.version = "12.2"
Module #17
Name: module-systemd-login
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of this user"
module.version = "12.2"
Module #18
Name: module-position-event-sounds
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
module.version = "12.2"
Module #19
Name: module-role-cork
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles while others exist"
module.version = "12.2"
Module #20
Name: module-filter-heuristics
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "12.2"
Module #21
Name: module-filter-apply
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when needed"
module.version = "12.2"
Module #22
Name: module-alsa-card
Argument: device_id="1" name="usb-Focusrite_Scarlett_Solo_USB-00" card_name="alsa_card.usb-Focusrite_Scarlett_Solo_USB-00" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"
Usage counter: 1
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "12.2"
Sink #0
State: SUSPENDED
Name: alsa_output.pci-0000_00_1b.0.analog-stereo
Description: Built-in Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: no
Volume: front-left: 22284 / 34% / -28,11 dB, front-right: 22284 / 34% / -28,11 dB
balance 0,00
Base Volume: 65536 / 100% / 0,00 dB
Monitor Source: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "CX20590 Analog"
alsa.id = "CX20590 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf2a20000 irq 41"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1c20"
device.product.name = "6 Series/C200 Series Chipset Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Conexant CX20590"
alsa.components = "HDA:14f1506e,17aa21d2,00100003"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-output-speaker: Speakers (priority: 10000)
analog-output-headphones: Headphones (priority: 9000, not available)
Active Port: analog-output-speaker
Formats:
pcm
Sink #1
State: RUNNING
Name: alsa_output.usb-Focusrite_Scarlett_Solo_USB-00.analog-stereo
Description: Scarlett Solo USB Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s32le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 22
Mute: no
Volume: front-left: 22284 / 34% / -28,11 dB, front-right: 22284 / 34% / -28,11 dB
balance 0,00
Base Volume: 65536 / 100% / 0,00 dB
Monitor Source: alsa_output.usb-Focusrite_Scarlett_Solo_USB-00.analog-stereo.monitor
Latency: 60096 usec, configured 60000 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "32"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "Scarlett Solo USB"
alsa.long_card_name = "Focusrite Scarlett Solo USB at usb-0000:0d:00.0-1, high speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:0d:00.0-usb-0:1:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:1c.4/0000:0d:00.0/usb2/2-1/2-1:1.0/sound/card1"
udev.id = "usb-Focusrite_Scarlett_Solo_USB-00"
device.bus = "usb"
device.vendor.id = "1235"
device.vendor.name = "Focusrite-Novation"
device.product.id = "8205"
device.product.name = "Scarlett Solo USB"
device.serial = "Focusrite_Scarlett_Solo_USB"
device.string = "front:1"
device.buffering.buffer_size = "705600"
device.buffering.fragment_size = "352800"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Scarlett Solo USB Analog Stereo"
alsa.components = "USB1235:8205"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
Ports:
analog-output: Analog Output (priority: 9900)
Active Port: analog-output
Formats:
pcm
Source #0
State: SUSPENDED
Name: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Description: Monitor of Built-in Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: yes
Volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
Base Volume: 65536 / 100% / 0,00 dB
Monitor of Sink: alsa_output.pci-0000_00_1b.0.analog-stereo
Latency: 0 usec, configured 0 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Built-in Audio Analog Stereo"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf2a20000 irq 41"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1c20"
device.product.name = "6 Series/C200 Series Chipset Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formats:
pcm
Source #1
State: SUSPENDED
Name: alsa_input.pci-0000_00_1b.0.analog-stereo
Description: Built-in Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: yes
Volume: front-left: 18071 / 28% / -33,57 dB, front-right: 18071 / 28% / -33,57 dB
balance 0,00
Base Volume: 8250 / 13% / -54,00 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "CX20590 Analog"
alsa.id = "CX20590 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf2a20000 irq 41"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1c20"
device.product.name = "6 Series/C200 Series Chipset Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Conexant CX20590"
alsa.components = "HDA:14f1506e,17aa21d2,00100003"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-input-internal-mic: Internal Microphone (priority: 8900)
analog-input-mic: Microphone (priority: 8700, not available)
Active Port: analog-input-internal-mic
Formats:
pcm
Source #2
State: IDLE
Name: alsa_output.usb-Focusrite_Scarlett_Solo_USB-00.analog-stereo.monitor
Description: Monitor of Scarlett Solo USB Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s32le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 22
Mute: no
Volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
Base Volume: 65536 / 100% / 0,00 dB
Monitor of Sink: alsa_output.usb-Focusrite_Scarlett_Solo_USB-00.analog-stereo
Latency: 0 usec, configured 2000000 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Scarlett Solo USB Analog Stereo"
device.class = "monitor"
alsa.card = "1"
alsa.card_name = "Scarlett Solo USB"
alsa.long_card_name = "Focusrite Scarlett Solo USB at usb-0000:0d:00.0-1, high speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:0d:00.0-usb-0:1:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:1c.4/0000:0d:00.0/usb2/2-1/2-1:1.0/sound/card1"
udev.id = "usb-Focusrite_Scarlett_Solo_USB-00"
device.bus = "usb"
device.vendor.id = "1235"
device.vendor.name = "Focusrite-Novation"
device.product.id = "8205"
device.product.name = "Scarlett Solo USB"
device.serial = "Focusrite_Scarlett_Solo_USB"
device.string = "1"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
Formats:
pcm
Source #3
State: SUSPENDED
Name: alsa_input.usb-Focusrite_Scarlett_Solo_USB-00.analog-stereo
Description: Scarlett Solo USB Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s32le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 22
Mute: no
Volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
Base Volume: 65536 / 100% / 0,00 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "32"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "Scarlett Solo USB"
alsa.long_card_name = "Focusrite Scarlett Solo USB at usb-0000:0d:00.0-1, high speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:0d:00.0-usb-0:1:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:1c.4/0000:0d:00.0/usb2/2-1/2-1:1.0/sound/card1"
udev.id = "usb-Focusrite_Scarlett_Solo_USB-00"
device.bus = "usb"
device.vendor.id = "1235"
device.vendor.name = "Focusrite-Novation"
device.product.id = "8205"
device.product.name = "Scarlett Solo USB"
device.serial = "Focusrite_Scarlett_Solo_USB"
device.string = "front:1"
device.buffering.buffer_size = "705600"
device.buffering.fragment_size = "352800"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Scarlett Solo USB Analog Stereo"
alsa.components = "USB1235:8205"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
Ports:
analog-input: Analog Input (priority: 10000)
Active Port: analog-input
Formats:
pcm
Sink Input #0
Driver: protocol-native.c
Owner Module: 10
Client: 8
Sink: 1
Sample Specification: float32le 2ch 44100Hz
Channel Map: front-left,front-right
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "44100" format.channels = "2" format.channel_map = "\"front-left,front-right\""
Corked: no
Mute: no
Volume: front-left: 22284 / 34% / -28,11 dB, front-right: 22284 / 34% / -28,11 dB
balance 0,00
Buffer Latency: 41519 usec
Sink Latency: 59481 usec
Resample method: copy
Properties:
media.icon_name = "io.github.GnomeMpv"
media.name = "Ganz oder gar nicht"
application.name = "io.github.GnomeMpv"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.process.id = "31665"
application.process.user = "adrian"
application.process.host = "katniss"
application.process.binary = "gnome-mpv"
application.icon_name = "io.github.GnomeMpv"
application.language = "en_US.utf8"
window.x11.display = ":0"
application.process.machine_id = "d268b608dbeca21392fe27e5000004d3"
application.process.session_id = "2"
module-stream-restore.id = "sink-input-by-application-name:io.github.GnomeMpv"
Client #0
Driver: module-systemd-login.c
Owner Module: 17
Properties:
application.name = "Login Session 2"
systemd-login.session = "2"
Client #1
Driver: protocol-native.c
Owner Module: 10
Properties:
application.name = "Thunderbird"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.icon_name = "thunderbird"
application.version = "60.8.0"
application.process.id = "2737"
application.process.user = "adrian"
application.process.host = "katniss"
application.process.binary = "thunderbird-bin"
application.language = "en_US.utf8"
window.x11.display = ":0"
application.process.machine_id = "d268b608dbeca21392fe27e5000004d3"
application.process.session_id = "2"
Client #2
Driver: protocol-native.c
Owner Module: 10
Properties:
application.name = "libcanberra"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.version = "0.30"
application.id = "org.freedesktop.libcanberra"
application.process.id = "1379"
application.process.user = "adrian"
application.process.host = "katniss"
application.process.binary = "gnome-settings-daemon"
application.language = "en_US.utf8"
window.x11.display = ":0"
application.process.machine_id = "d268b608dbeca21392fe27e5000004d3"
application.process.session_id = "2"
Client #3
Driver: protocol-native.c
Owner Module: 10
Properties:
application.name = "Firefox"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.icon_name = "firefox"
application.version = "68.0.2"
application.process.id = "2921"
application.process.user = "adrian"
application.process.host = "katniss"
application.process.binary = "firefox (deleted)"
application.language = "en_US.utf8"
window.x11.display = ":0"
application.process.machine_id = "d268b608dbeca21392fe27e5000004d3"
application.process.session_id = "2"
Client #4
Driver: protocol-native.c
Owner Module: 10
Properties:
application.name = "gnome-settings-daemon"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
window.x11.display = ":0"
window.x11.screen = "0"
application.process.id = "1379"
application.process.user = "adrian"
application.process.host = "katniss"
application.process.binary = "gnome-settings-daemon"
application.language = "en_US.utf8"
application.process.machine_id = "d268b608dbeca21392fe27e5000004d3"
application.process.session_id = "2"
Client #5
Driver: protocol-native.c
Owner Module: 10
Properties:
application.name = "GNOME Shell"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.id = "org.gnome.Shell"
application.icon_name = "start-here"
application.language = "en_US.utf8"
window.x11.screen = "0"
window.x11.display = ":0"
application.process.id = "1294"
application.process.user = "adrian"
application.process.host = "katniss"
application.process.binary = "gnome-shell"
application.process.machine_id = "d268b608dbeca21392fe27e5000004d3"
application.process.session_id = "2"
Client #6
Driver: protocol-native.c
Owner Module: 10
Properties:
application.name = "GNOME Shell Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "3.22.3"
application.process.id = "1294"
application.process.user = "adrian"
application.process.host = "katniss"
application.process.binary = "gnome-shell"
application.language = "en_US.utf8"
window.x11.display = ":0"
application.process.machine_id = "d268b608dbeca21392fe27e5000004d3"
application.process.session_id = "2"
Client #7
Driver: protocol-native.c
Owner Module: 10
Properties:
application.name = "GNOME Volume Control Media Keys"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "3.22.2"
application.process.id = "1379"
application.process.user = "adrian"
application.process.host = "katniss"
application.process.binary = "gnome-settings-daemon"
application.language = "en_US.utf8"
window.x11.display = ":0"
application.process.machine_id = "d268b608dbeca21392fe27e5000004d3"
application.process.session_id = "2"
Client #8
Driver: protocol-native.c
Owner Module: 10
Properties:
application.name = "io.github.GnomeMpv"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.process.id = "31665"
application.process.user = "adrian"
application.process.host = "katniss"
application.process.binary = "gnome-mpv"
application.icon_name = "io.github.GnomeMpv"
application.language = "en_US.utf8"
window.x11.display = ":0"
application.process.machine_id = "d268b608dbeca21392fe27e5000004d3"
application.process.session_id = "2"
Client #9
Driver: protocol-native.c
Owner Module: 10
Properties:
application.name = "pactl"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.process.id = "31908"
application.process.user = "adrian"
application.process.host = "katniss"
application.process.binary = "pactl"
application.language = "en_US.utf8"
window.x11.display = ":0"
application.process.machine_id = "d268b608dbeca21392fe27e5000004d3"
application.process.session_id = "2"
Card #0
Name: alsa_card.pci-0000_00_1b.0
Driver: module-alsa-card.c
Owner Module: 6
Properties:
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf2a20000 irq 41"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1c20"
device.product.name = "6 Series/C200 Series Chipset Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "0"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: yes)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: yes)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:analog-stereo+input:analog-stereo
Ports:
analog-input-internal-mic: Internal Microphone (priority: 8900, latency offset: 0 usec)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo
analog-input-mic: Microphone (priority: 8700, latency offset: 0 usec, not available)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo
analog-output-speaker: Speakers (priority: 10000, latency offset: 0 usec)
Properties:
device.icon_name = "audio-speakers"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
analog-output-headphones: Headphones (priority: 9000, latency offset: 0 usec, not available)
Properties:
device.icon_name = "audio-headphones"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
Card #1
Name: alsa_card.usb-Focusrite_Scarlett_Solo_USB-00
Driver: module-alsa-card.c
Owner Module: 22
Properties:
alsa.card = "1"
alsa.card_name = "Scarlett Solo USB"
alsa.long_card_name = "Focusrite Scarlett Solo USB at usb-0000:0d:00.0-1, high speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:0d:00.0-usb-0:1:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:1c.4/0000:0d:00.0/usb2/2-1/2-1:1.0/sound/card1"
udev.id = "usb-Focusrite_Scarlett_Solo_USB-00"
device.bus = "usb"
device.vendor.id = "1235"
device.vendor.name = "Focusrite-Novation"
device.product.id = "8205"
device.product.name = "Scarlett Solo USB"
device.serial = "Focusrite_Scarlett_Solo_USB"
device.string = "1"
device.description = "Scarlett Solo USB"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
Profiles:
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: yes)
input:iec958-stereo: Digital Stereo (IEC958) Input (sinks: 0, sources: 1, priority: 55, available: yes)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: yes)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: yes)
output:analog-stereo+input:iec958-stereo: Analog Stereo Output + Digital Stereo (IEC958) Input (sinks: 1, sources: 1, priority: 6555, available: yes)
output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 5500, available: yes)
output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5565, available: yes)
output:iec958-stereo+input:iec958-stereo: Digital Stereo Duplex (IEC958) (sinks: 1, sources: 1, priority: 5555, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:analog-stereo+input:analog-stereo
Ports:
analog-input: Analog Input (priority: 10000, latency offset: 0 usec)
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:iec958-stereo+input:analog-stereo
iec958-stereo-input: Digital Input (S/PDIF) (priority: 0, latency offset: 0 usec)
Part of profile(s): input:iec958-stereo, output:analog-stereo+input:iec958-stereo, output:iec958-stereo+input:iec958-stereo
analog-output: Analog Output (priority: 9900, latency offset: 0 usec)
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-stereo+input:iec958-stereo
iec958-stereo-output: Digital Output (S/PDIF) (priority: 0, latency offset: 0 usec)
Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-stereo+input:iec958-stereo
-------------- next part --------------
A non-text attachment was scrubbed...
Name: pulseaudio.log.gz
Type: application/gzip
Size: 39694 bytes
Desc: not available
URL: <http://alioth-lists.debian.net/pipermail/pkg-pulseaudio-devel/attachments/20190820/dd8e0515/attachment-0001.gz>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: OpenPGP digital signature
URL: <http://alioth-lists.debian.net/pipermail/pkg-pulseaudio-devel/attachments/20190820/dd8e0515/attachment-0001.sig>
More information about the pkg-pulseaudio-devel
mailing list