Bug#918522: No sound with PulseAudio when an NVidia GPU is installed.

[Bernat]

Package: pulseaudio
Version: 12.2-4
Followup-For: Bug #918522

Sorry, the contents of the file /etc/pulse/default.pa in my last reply are
incorrect.

Lines:

load-module module-alsa-sink
load-module module-alsa-source device=hw:1,0

should be commented like this:

#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0

Since that's how they were when the log was recorded.



-- Package-specific info:
File '/etc/default/pulseaudio' does not exist


-- System Information:
Debian Release: buster/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.19.0-2-amd64 (SMP w/8 CPU cores)
Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE
Locale: LANG=es_ES.utf8, LC_CTYPE=es_ES.utf8 (charmap=UTF-8), LANGUAGE=es_ES.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages pulseaudio depends on:
ii  adduser                      3.118
ii  libasound2                   1.1.8-1
ii  libasound2-plugins           1.1.8-1
ii  libc6                        2.28-8
ii  libcap2                      1:2.25-2
ii  libdbus-1-3                  1.12.12-1
ii  libgcc1                      1:8.3.0-2
ii  libice6                      2:1.0.9-2
ii  libltdl7                     2.4.6-9
ii  liborc-0.4-0                 1:0.4.28-3.1
ii  libpulse0                    12.2-4
ii  libsm6                       2:1.2.3-1
ii  libsndfile1                  1.0.28-6
ii  libsoxr0                     0.1.2-3
ii  libspeexdsp1                 1.2~rc1.2-1+b2
ii  libstdc++6                   8.3.0-2
ii  libsystemd0                  241-1
ii  libtdb1                      1.3.16-2+b1
ii  libudev1                     241-1
ii  libwebrtc-audio-processing1  0.3-1
ii  libx11-6                     2:1.6.7-1
ii  libx11-xcb1                  2:1.6.7-1
ii  libxcb1                      1.13.1-2
ii  libxtst6                     2:1.2.3-1
ii  lsb-base                     10.2019031300
ii  pulseaudio-utils             12.2-4

Versions of packages pulseaudio recommends:
ii  dbus-user-session  1.12.12-1
ii  libpam-systemd     241-1
ii  rtkit              0.11-6

Versions of packages pulseaudio suggests:
pn  paman        <none>
ii  paprefs      1.0-1
ii  pavucontrol  3.0-4
ii  pavumeter    0.9.3-4+b3
ii  udev         241-1

-- no debconf information
-------------- next part --------------
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.

# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)

.fail

### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore

### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties

### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available

### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink

### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev support)
load-module module-detect
.endif

### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif

### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif

.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif

### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix

### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish

### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv

### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor

### Load additional modules from GSettings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists module-gsettings.so
.nofail
load-module module-gsettings
.fail
.endif


### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore

### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams

### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink

### Honour intended role device property
load-module module-intended-roles

### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle

### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif

### Enable positioned event sounds
load-module module-position-event-sounds

### Cork music/video streams when a phone stream is active
load-module module-role-cork

### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply

### Make some devices default
#set-default-sink output
#set-default-source input