Bug#977696: pulseaudio: Pulseaudio 13.0.5 fails on Bullseye (permissions, cookie)
Andrew Savchenko
andrew at lists.savchenko.net
Sat Dec 19 03:12:08 GMT 2020
Package: pulseaudio
Version: 13.0-5
Severity: normal
X-Debbugs-Cc: andrew at lists.savchenko.net
Dear Maintainer,
1. What led up to the situation?
`apt install pulseaudio` over the minimal installation of Bullseye
alpha 3.
2. What exactly did you do (or not do) that was effective (or ineffective)?
Updated all packages, no changes to the pulseaudio config.
`*-firmware-*` packages are installed, including "non-free" ones.
3. What was the outcome of this action?
`pactl` and others are unable to communicate with Pulseaudio.
Please refer to the https://paste.debian.net/1177551/
4. What outcome did you expect instead?
Pulseaudio works out of the box.
-- Package-specific info:
File '/etc/default/pulseaudio' does not exist
-- System Information:
Debian Release: bullseye/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 5.9.0-4-amd64 (SMP w/12 CPU threads)
Kernel taint flags: TAINT_WARN
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8), LANGUAGE=en_AU:en
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages pulseaudio depends on:
ii adduser 3.118
ii init-system-helpers 1.59
ii libasound2 1.2.4-1
ii libasound2-plugins 1.2.2-2
ii libc6 2.31-5
ii libcap2 1:2.44-1
ii libdbus-1-3 1.12.20-1
ii libgcc-s1 10.2.1-1
ii libice6 2:1.0.10-1
ii libltdl7 2.4.6-14
ii liborc-0.4-0 1:0.4.32-1
ii libpulse0 13.0-5
ii libsm6 2:1.2.3-1
ii libsndfile1 1.0.28-8
ii libsoxr0 0.1.3-4
ii libspeexdsp1 1.2~rc1.2-1.1
ii libstdc++6 10.2.1-1
ii libsystemd0 247.1-3
ii libtdb1 1.4.3-1+b1
ii libudev1 247.1-3
ii libwebrtc-audio-processing1 0.3-1+b1
ii libx11-6 2:1.6.12-1
ii libx11-xcb1 2:1.6.12-1
ii libxcb1 1.14-2
ii libxtst6 2:1.2.3-1
ii lsb-base 11.1.0
ii pulseaudio-utils 13.0-5
Versions of packages pulseaudio recommends:
ii dbus-user-session 1.12.20-1
ii libpam-systemd [logind] 247.1-3
ii rtkit 0.13-4
Versions of packages pulseaudio suggests:
pn paman <none>
pn paprefs <none>
pn pavucontrol <none>
pn pavumeter <none>
ii udev 247.1-3
-- no debconf information
-------------- next part --------------
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; default-sink =
; default-source =
; default-server =
; default-dbus-server =
; autospawn = yes
; daemon-binary = /usr/bin/pulseaudio
; extra-arguments = --log-target=syslog
; cookie-file =
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; auto-connect-localhost = no
; auto-connect-display = no
-------------- next part --------------
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; enable-memfd = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; lock-memory = no
; cpu-limit = no
; high-priority = yes
; nice-level = -11
; realtime-scheduling = yes
; realtime-priority = 5
; exit-idle-time = 20
; scache-idle-time = 20
; dl-search-path = (depends on architecture)
; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa
; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0
; resample-method = speex-float-1
; avoid-resampling = false
; enable-remixing = yes
; remixing-use-all-sink-channels = yes
; enable-lfe-remixing = no
; lfe-crossover-freq = 0
; flat-volumes = no
; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 200000
; default-sample-format = s16le
; default-sample-rate = 44100
; alternate-sample-rate = 48000
; default-sample-channels = 2
; default-channel-map = front-left,front-right
; default-fragments = 4
; default-fragment-size-msec = 25
; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0
-------------- next part --------------
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)
.fail
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev support)
load-module module-detect
.endif
### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif
### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif
.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish
### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv
### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor
### Load additional modules from GSettings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists module-gsettings.so
.nofail
load-module module-gsettings
.fail
.endif
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Honour intended role device property
load-module module-intended-roles
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif
### Enable positioned event sounds
load-module module-position-event-sounds
### Cork music/video streams when a phone stream is active
load-module module-role-cork
### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply
### Make some devices default
#set-default-sink output
#set-default-source input
-------------- next part --------------
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started in system
# mode.
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev/hal support)
load-module module-detect
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### Enable positioned event sounds
load-module module-position-event-sounds
-------------- next part --------------
Connection failure: Connection refused
pa_context_connect() failed: Connection refused
-------------- next part --------------
Connection failure: Connection refused
pa_context_connect() failed: Connection refused
-------------- next part --------------
$ sudo cat /var/log/syslog | grep pulse
Dec 16 20:43:54 computer dbus-daemon[735]: Unknown username "pulse" in message bus configuration file
Dec 16 20:43:59 computer dbus-daemon[735]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service' requested by ':1.6126' (uid=1000 pid=188294 comm="pulseaudio ")
Dec 18 21:43:17 computer dbus-daemon[1796]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service' requested by ':1.7' (uid=1000 pid=5170 comm="/usr/bin/pulseaudio --daemonize=no ")
Dec 18 21:43:17 computer pulseaudio[5170]: W: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device HDMI3, assuming stereo duplex.
Dec 18 21:43:17 computer pulseaudio[5170]: W: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device HDMI2, assuming stereo duplex.
Dec 18 21:43:17 computer pulseaudio[5170]: W: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device HDMI1, assuming stereo duplex.
Dec 18 21:43:17 computer pulseaudio[5170]: E: [pulseaudio] alsa-ucm.c: No UCM verb is valid for acp
Dec 18 21:43:18 computer pulseaudio[5170]: W: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device HDMI3, assuming stereo duplex.
Dec 18 21:43:18 computer pulseaudio[5170]: W: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device HDMI2, assuming stereo duplex.
Dec 18 21:43:18 computer pulseaudio[5170]: W: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device HDMI1, assuming stereo duplex.
Dec 18 21:43:18 computer pulseaudio[5170]: W: [pulseaudio] module-alsa-card.c: Jack 'HDMI/DP,pcm=3 Jack' seems to have disappeared.
Dec 18 21:43:18 computer pulseaudio[5170]: W: [pulseaudio] module-alsa-card.c: Jack 'HDMI/DP,pcm=7 Jack' seems to have disappeared.
Dec 18 21:43:18 computer pulseaudio[5170]: W: [pulseaudio] module-alsa-card.c: Jack 'HDMI/DP,pcm=8 Jack' seems to have disappeared.
Dec 18 22:29:03 computer systemd[5150]: pulseaudio.service: Succeeded.
Dec 19 08:03:55 computer dbus-daemon[1788]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service' requested by ':1.7' (uid=1000 pid=3457 comm="/usr/bin/pulseaudio --daemonize=no ")
Dec 19 08:03:55 computer pulseaudio[3457]: W: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device HDMI3, assuming stereo duplex.
Dec 19 08:03:55 computer pulseaudio[3457]: W: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device HDMI2, assuming stereo duplex.
Dec 19 08:03:55 computer pulseaudio[3457]: W: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device HDMI1, assuming stereo duplex.
Dec 19 08:03:55 computer pulseaudio[3457]: E: [pulseaudio] alsa-ucm.c: No UCM verb is valid for acp
Dec 19 08:03:56 computer pulseaudio[3457]: W: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device HDMI3, assuming stereo duplex.
Dec 19 08:03:56 computer pulseaudio[3457]: W: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device HDMI2, assuming stereo duplex.
Dec 19 08:03:56 computer pulseaudio[3457]: W: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device HDMI1, assuming stereo duplex.
Dec 19 08:03:56 computer pulseaudio[3457]: W: [pulseaudio] module-alsa-card.c: Jack 'HDMI/DP,pcm=3 Jack' seems to have disappeared.
Dec 19 08:03:56 computer pulseaudio[3457]: W: [pulseaudio] module-alsa-card.c: Jack 'HDMI/DP,pcm=7 Jack' seems to have disappeared.
Dec 19 08:03:56 computer pulseaudio[3457]: W: [pulseaudio] module-alsa-card.c: Jack 'HDMI/DP,pcm=8 Jack' seems to have disappeared.
Dec 19 11:39:57 computer pulseaudio[64766]: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device HDMI3, assuming stereo duplex.
Dec 19 11:39:57 computer pulseaudio[64766]: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device HDMI2, assuming stereo duplex.
Dec 19 11:39:57 computer pulseaudio[64766]: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device HDMI1, assuming stereo duplex.
Dec 19 11:39:57 computer pulseaudio[64766]: No UCM verb is valid for acp
Dec 19 11:39:57 computer pulseaudio[64766]: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device HDMI3, assuming stereo duplex.
Dec 19 11:39:57 computer pulseaudio[64766]: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device HDMI2, assuming stereo duplex.
Dec 19 11:39:57 computer pulseaudio[64766]: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device HDMI1, assuming stereo duplex.
Dec 19 11:39:57 computer pulseaudio[64766]: Jack 'HDMI/DP,pcm=3 Jack' seems to have disappeared.
Dec 19 11:39:57 computer pulseaudio[64766]: Jack 'HDMI/DP,pcm=7 Jack' seems to have disappeared.
Dec 19 11:39:57 computer pulseaudio[64766]: Jack 'HDMI/DP,pcm=8 Jack' seems to have disappeared.
Dec 19 11:39:57 computer pulseaudio[64766]: D-Bus name org.PulseAudio1 already taken.
Dec 19 11:40:27 computer pulseaudio[64944]: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device HDMI3, assuming stereo duplex.
Dec 19 11:40:27 computer pulseaudio[64944]: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device HDMI2, assuming stereo duplex.
Dec 19 11:40:27 computer pulseaudio[64944]: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device HDMI1, assuming stereo duplex.
Dec 19 11:40:27 computer pulseaudio[64944]: No UCM verb is valid for acp
Dec 19 11:40:27 computer pulseaudio[64944]: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device HDMI3, assuming stereo duplex.
Dec 19 11:40:27 computer pulseaudio[64944]: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device HDMI2, assuming stereo duplex.
Dec 19 11:40:27 computer pulseaudio[64944]: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device HDMI1, assuming stereo duplex.
Dec 19 11:40:27 computer pulseaudio[64944]: Jack 'HDMI/DP,pcm=3 Jack' seems to have disappeared.
Dec 19 11:40:27 computer pulseaudio[64944]: Jack 'HDMI/DP,pcm=7 Jack' seems to have disappeared.
Dec 19 11:40:27 computer pulseaudio[64944]: Jack 'HDMI/DP,pcm=8 Jack' seems to have disappeared.
Dec 19 11:40:27 computer pulseaudio[64944]: Failed to open cookie file '/root/.config/pulse/cookie': No such file or directory
Dec 19 11:40:27 computer pulseaudio[64944]: Failed to load authentication key '/root/.config/pulse/cookie': No such file or directory
Dec 19 11:40:27 computer pulseaudio[64944]: Failed to open cookie file '/root/.pulse-cookie': No such file or directory
Dec 19 11:40:27 computer pulseaudio[64944]: Failed to load authentication key '/root/.pulse-cookie': No such file or directory
Dec 19 11:40:27 computer pulseaudio[64944]: Unable to contact D-Bus: org.freedesktop.DBus.Error.Spawn.ExecFailed: /usr/bin/dbus-launch terminated abnormally without any error message
Dec 19 11:40:27 computer pulseaudio[64944]: Unable to contact D-Bus: org.freedesktop.DBus.Error.Spawn.ExecFailed: /usr/bin/dbus-launch terminated abnormally without any error message
Dec 19 11:52:46 computer dbus-daemon[1694]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service' requested by ':1.7' (uid=1000 pid=3879 comm="/usr/bin/pulseaudio --daemonize=no ")
Dec 19 11:52:47 computer pulseaudio[3879]: W: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device HDMI3, assuming stereo duplex.
Dec 19 11:52:47 computer pulseaudio[3879]: W: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device HDMI2, assuming stereo duplex.
Dec 19 11:52:47 computer pulseaudio[3879]: W: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device HDMI1, assuming stereo duplex.
Dec 19 11:52:47 computer pulseaudio[3879]: E: [pulseaudio] alsa-ucm.c: No UCM verb is valid for acp
Dec 19 11:52:47 computer pulseaudio[3879]: W: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device HDMI3, assuming stereo duplex.
Dec 19 11:52:47 computer pulseaudio[3879]: W: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device HDMI2, assuming stereo duplex.
Dec 19 11:52:47 computer pulseaudio[3879]: W: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device HDMI1, assuming stereo duplex.
Dec 19 11:52:47 computer pulseaudio[3879]: W: [pulseaudio] module-alsa-card.c: Jack 'HDMI/DP,pcm=3 Jack' seems to have disappeared.
Dec 19 11:52:47 computer pulseaudio[3879]: W: [pulseaudio] module-alsa-card.c: Jack 'HDMI/DP,pcm=7 Jack' seems to have disappeared.
Dec 19 11:52:47 computer pulseaudio[3879]: W: [pulseaudio] module-alsa-card.c: Jack 'HDMI/DP,pcm=8 Jack' seems to have disappeared.
More information about the pkg-pulseaudio-devel
mailing list