From hoareau45 at free.fr Mon Jun 9 19:45:55 2025 From: hoareau45 at free.fr (Hoareau J.P.) Date: Mon, 09 Jun 2025 20:45:55 +0200 Subject: Bug#1107565: pulseaudio-equalizer: Starting qpaeq ok but bot found in Pulseaudio Message-ID: <174949475565.4407.16394648708448259059.reportbug@Soleil> Package: pulseaudio-equalizer Version: 17.0+dfsg1-2+b1 Severity: important X-Debbugs-Cc: hoareau45 at free.fr Dear Maintainer, When I start "QPAEQ" (pulseaudio-equalizer) I get this message: QSocketNotifier: Can only be used with threads started with QThread Test for Dbus: root at Soleil:~# pactl load-module module-equalizer-sink ?chec?: Aucune entit? de ce type (No entry found) root at Soleil:~# pactl load-module module-dbus-protocol ?chec?: Aucune entit? de ce type (no entry found) The window of the equalizer apear on the screen but don't appear in pulseaudio volume control. This bug is present on Kde Plasma X11 or Wayland. Thanks for your help. Regards Here under my /etc/pulse/default.pa #!/usr/bin/pulseaudio -nF # # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, see . # This startup script is used only if PulseAudio is started per-user # (i.e. not in system mode) .fail ### Automatically restore the volume of streams and devices load-module module-device-restore load-module module-stream-restore load-module module-card-restore ### Automatically augment property information from .desktop files ### stored in /usr/share/application load-module module-augment-properties ### Should be after module-*-restore but before module-*-detect load-module module-switch-on-port-available ### Load audio drivers statically ### (it's probably better to not load these drivers manually, but instead ### use module-udev-detect -- see below -- for doing this automatically) #load-module module-alsa-sink #load-module module-alsa-source device=hw:1,0 #load-module module-oss device="/dev/dsp" sink_name=output source_name=input #load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input #load-module module-null-sink #load-module module-pipe-sink ### Automatically load driver modules depending on the hardware available .ifexists module-udev-detect.so load-module module-udev-detect .else ### Use the static hardware detection module (for systems that lack udev support) load-module module-detect .endif ### Automatically connect sink and source if JACK server is present .ifexists module-jackdbus-detect.so .nofail load-module module-jackdbus-detect channels=2 .fail .endif ### Automatically load driver modules for Bluetooth hardware .ifexists module-bluetooth-policy.so load-module module-bluetooth-policy .endif .ifexists module-bluetooth-discover.so load-module module-bluetooth-discover .endif ### Load several protocols .ifexists module-esound-protocol-unix.so load-module module-esound-protocol-unix .endif load-module module-native-protocol-unix ### Network access (may be configured with paprefs, so leave this commented ### here if you plan to use paprefs) #load-module module-esound-protocol-tcp #load-module module-native-protocol-tcp #load-module module-zeroconf-publish ### Load the integrated PulseAudio equalizer and D-Bus module load-module module-equalizer-sink load-module module-dbus-protocol ### Load the RTP receiver module (also configured via paprefs, see above) #load-module module-rtp-recv ### Load the RTP sender module (also configured via paprefs, see above) #load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'" #load-module module-rtp-send source=rtp.monitor ### Load additional modules from GSettings. This can be configured with the paprefs tool. ### Please keep in mind that the modules configured by paprefs might conflict with manually ### loaded modules. .ifexists module-gsettings.so .nofail load-module module-gsettings .fail .endif ### Automatically restore the default sink/source when changed by the user ### during runtime ### NOTE: This should be loaded as early as possible so that subsequent modules ### that look up the default sink/source get the right value load-module module-default-device-restore ### Make sure we always have a sink around, even if it is a null sink. load-module module-always-sink ### Honour intended role device property load-module module-intended-roles ### Automatically suspend sinks/sources that become idle for too long load-module module-suspend-on-idle ### If autoexit on idle is enabled we want to make sure we only quit ### when no local session needs us anymore. .ifexists module-console-kit.so load-module module-console-kit .endif .ifexists module-systemd-login.so load-module module-systemd-login .endif ### Enable positioned event sounds load-module module-position-event-sounds ### Cork music/video streams when a phone stream is active load-module module-role-cork ### Modules to allow autoloading of filters (such as echo cancellation) ### on demand. module-filter-heuristics tries to determine what filters ### make sense, and module-filter-apply does the heavy-lifting of ### loading modules and rerouting streams. load-module module-filter-heuristics load-module module-filter-apply ### Make some devices default #set-default-sink output #set-default-source input ### Allow including a default.pa.d directory, which if present, can be used ### for additional configuration snippets. ### Note that those snippet files must have a .pa file extension, not .conf .nofail .include /etc/pulse/default.pa.d -- System Information: Debian Release: 13.0 APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 6.12.30-amd64 (SMP w/8 CPU threads; PREEMPT) Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8), LANGUAGE not set Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages pulseaudio-equalizer depends on: ii libc6 2.41-8 ii libdbus-1-3 1.16.2-2 ii libfftw3-single3 3.3.10-2+b1 ii libpulse0 17.0+dfsg1-2+b1 ii pulseaudio 17.0+dfsg1-2+b1 ii python3 3.13.3-1 ii python3-dbus 1.4.0-1 ii python3-dbus.mainloop.pyqt5 5.15.11+dfsg-2 ii python3-pyqt5 5.15.11+dfsg-2 pulseaudio-equalizer recommends no packages. pulseaudio-equalizer suggests no packages. -- no debconf information