[Pkg-ruby-extras-maintainers] r220 - in
packages/libjson-ruby/trunk: . debian
Esteban Manchado Velázquez
zoso at costa.debian.org
Thu Jan 5 00:32:55 UTC 2006
Author: zoso
Date: 2006-01-05 00:32:54 +0000 (Thu, 05 Jan 2006)
New Revision: 220
Added:
packages/libjson-ruby/trunk/debian/
packages/libjson-ruby/trunk/debian/changelog
packages/libjson-ruby/trunk/debian/compat
packages/libjson-ruby/trunk/debian/control
packages/libjson-ruby/trunk/debian/control.in
packages/libjson-ruby/trunk/debian/edit-json.dirs
packages/libjson-ruby/trunk/debian/rules
packages/libjson-ruby/trunk/setup.rb
Log:
Load newtrunk into packages/libjson-ruby/trunk.
Added: packages/libjson-ruby/trunk/debian/changelog
===================================================================
--- packages/libjson-ruby/trunk/debian/changelog 2006-01-05 00:32:13 UTC (rev 219)
+++ packages/libjson-ruby/trunk/debian/changelog 2006-01-05 00:32:54 UTC (rev 220)
@@ -0,0 +1,5 @@
+libjson-ruby (0.4.0-1) unstable; urgency=low
+
+ * Initial upload (Closes: #341904).
+
+ -- Esteban Manchado Velázquez <zoso at debian.org> Sat, 3 Dec 2005 23:24:14 +0000
Added: packages/libjson-ruby/trunk/debian/compat
===================================================================
--- packages/libjson-ruby/trunk/debian/compat 2006-01-05 00:32:13 UTC (rev 219)
+++ packages/libjson-ruby/trunk/debian/compat 2006-01-05 00:32:54 UTC (rev 220)
@@ -0,0 +1 @@
+4
Added: packages/libjson-ruby/trunk/debian/control
===================================================================
--- packages/libjson-ruby/trunk/debian/control 2006-01-05 00:32:13 UTC (rev 219)
+++ packages/libjson-ruby/trunk/debian/control 2006-01-05 00:32:54 UTC (rev 220)
@@ -0,0 +1,46 @@
+Source: libjson-ruby
+Section: interpreters
+Priority: optional
+Maintainer: Debian Ruby Extras Maintainers <pkg-ruby-extras-maintainers at lists.alioth.debian.org>
+Uploaders: Antonio S. de A. Terceiro <asaterceiro at inf.ufrgs.br>, David Moreno Garza <damog at debian.org>, David Nusinow <dnusinow at debian.org>, Paul van Tilburg <paulvt at debian.org>, Esteban Manchado Velázquez <zoso at debian.org>, Arnaud Cornet <arnaud.cornet at gmail.com>, Lucas Nussbaum <lucas at lucas-nussbaum.net>, Thierry Reding <thierry at doppeltgemoppelt.de>, Marc Dequènes (Duck) <Duck at DuckCorp.org>
+Build-Depends-Indep: cdbs, debhelper (>= 4.1.0), ruby-pkg-tools, ruby1.8
+Standards-Version: 3.6.2
+
+Package: libjson-ruby
+Architecture: all
+Depends: libjson-ruby1.8
+Description: JSON library for Ruby (default Ruby version)
+ This library implements the JSON (JavaScript Object Notation) specification in
+ Ruby, allowing the developer to easily convert data between Ruby and JSON. You
+ can think of it as a low fat alternative to XML, if you want to store data to
+ disk or transmit it over a network rather than use a verbose markup language.
+ .
+ This is a dummy package depending on the library for the current default
+ version of Ruby.
+
+Package: libjson-ruby-doc
+Architecture: all
+Description: JSON library for Ruby (documentation)
+ This library implements the JSON (JavaScript Object Notation) specification in
+ Ruby, allowing the developer to easily convert data between Ruby and JSON. You
+ can think of it as a low fat alternative to XML, if you want to store data to
+ disk or transmit it over a network rather than use a verbose markup language.
+ .
+ This is the documentation package, with upstream documentation, as well as
+ generated rdoc.
+
+Package: edit-json
+Architecture: all
+Depends: ruby1.8 libjson-ruby1.8 libgtk2-ruby
+Description: JSON files editor
+ Small graphical JSON editor. It allows to create and modify JSON (JavaScript
+ Object Notation) files with the aid of a graphical user interface.
+
+Package: libjson-ruby1.8
+Architecture: all
+Depends: ruby1.8
+Description: JSON library for Ruby (Ruby 1.8 version)
+ This library implements the JSON (JavaScript Object Notation) specification in
+ Ruby, allowing the developer to easily convert data between Ruby and JSON. You
+ can think of it as a low fat alternative to XML, if you want to store data to
+ disk or transmit it over a network rather than use a verbose markup language.
Added: packages/libjson-ruby/trunk/debian/control.in
===================================================================
--- packages/libjson-ruby/trunk/debian/control.in 2006-01-05 00:32:13 UTC (rev 219)
+++ packages/libjson-ruby/trunk/debian/control.in 2006-01-05 00:32:54 UTC (rev 220)
@@ -0,0 +1,46 @@
+Source: libjson-ruby
+Section: interpreters
+Priority: optional
+Maintainer: Debian Ruby Extras Maintainers <pkg-ruby-extras-maintainers at lists.alioth.debian.org>
+Uploaders: @RUBY_TEAM@
+Build-Depends-Indep: cdbs, debhelper (>= 4.1.0), ruby-pkg-tools, ruby1.8
+Standards-Version: 3.6.2
+
+Package: libjson-ruby
+Architecture: all
+Depends: libjson-ruby1.8
+Description: JSON library for Ruby (default Ruby version)
+ This library implements the JSON (JavaScript Object Notation) specification in
+ Ruby, allowing the developer to easily convert data between Ruby and JSON. You
+ can think of it as a low fat alternative to XML, if you want to store data to
+ disk or transmit it over a network rather than use a verbose markup language.
+ .
+ This is a dummy package depending on the library for the current default
+ version of Ruby.
+
+Package: libjson-ruby-doc
+Architecture: all
+Description: JSON library for Ruby (documentation)
+ This library implements the JSON (JavaScript Object Notation) specification in
+ Ruby, allowing the developer to easily convert data between Ruby and JSON. You
+ can think of it as a low fat alternative to XML, if you want to store data to
+ disk or transmit it over a network rather than use a verbose markup language.
+ .
+ This is the documentation package, with upstream documentation, as well as
+ generated rdoc.
+
+Package: edit-json
+Architecture: all
+Depends: ruby1.8 libjson-ruby1.8 libgtk2-ruby
+Description: JSON files editor
+ Small graphical JSON editor. It allows to create and modify JSON (JavaScript
+ Object Notation) files with the aid of a graphical user interface.
+
+Package: libjson-ruby1.8
+Architecture: all
+Depends: ruby1.8
+Description: JSON library for Ruby (Ruby 1.8 version)
+ This library implements the JSON (JavaScript Object Notation) specification in
+ Ruby, allowing the developer to easily convert data between Ruby and JSON. You
+ can think of it as a low fat alternative to XML, if you want to store data to
+ disk or transmit it over a network rather than use a verbose markup language.
Added: packages/libjson-ruby/trunk/debian/edit-json.dirs
===================================================================
--- packages/libjson-ruby/trunk/debian/edit-json.dirs 2006-01-05 00:32:13 UTC (rev 219)
+++ packages/libjson-ruby/trunk/debian/edit-json.dirs 2006-01-05 00:32:54 UTC (rev 220)
@@ -0,0 +1,2 @@
+usr/bin
+usr/lib/ruby/1.8/json
Added: packages/libjson-ruby/trunk/debian/rules
===================================================================
--- packages/libjson-ruby/trunk/debian/rules 2006-01-05 00:32:13 UTC (rev 219)
+++ packages/libjson-ruby/trunk/debian/rules 2006-01-05 00:32:54 UTC (rev 220)
@@ -0,0 +1,16 @@
+#!/usr/bin/make -f
+
+include /usr/share/cdbs/1/rules/debhelper.mk
+include /usr/share/ruby-pkg-tools/1/class/ruby-setup-rb.mk
+include /usr/share/ruby-pkg-tools/1/rules/uploaders.mk
+
+BASEDIR = `pwd`/debian
+
+common-binary-post-install-indep::
+ # Move edit_json.rb and related files to edit-json package
+ mv $(BASEDIR)/libjson-ruby1.8/usr/bin/edit_json.rb \
+ $(BASEDIR)/edit-json/usr/bin/
+ mv $(BASEDIR)/libjson-ruby1.8/usr/lib/ruby/1.8/json/editor.rb \
+ $(BASEDIR)/edit-json/usr/lib/ruby/1.8/json/
+ cp lib/json/*.xpm \
+ $(BASEDIR)/edit-json/usr/lib/ruby/1.8/json/
Property changes on: packages/libjson-ruby/trunk/debian/rules
___________________________________________________________________
Name: svn:executable
+ *
Added: packages/libjson-ruby/trunk/setup.rb
===================================================================
--- packages/libjson-ruby/trunk/setup.rb 2006-01-05 00:32:13 UTC (rev 219)
+++ packages/libjson-ruby/trunk/setup.rb 2006-01-05 00:32:54 UTC (rev 220)
@@ -0,0 +1,1360 @@
+#
+# setup.rb
+#
+# Copyright (c) 2000-2004 Minero Aoki
+#
+# This program is free software.
+# You can distribute/modify this program under the terms of
+# the GNU LGPL, Lesser General Public License version 2.1.
+#
+
+unless Enumerable.method_defined?(:map) # Ruby 1.4.6
+ module Enumerable
+ alias map collect
+ end
+end
+
+unless File.respond_to?(:read) # Ruby 1.6
+ def File.read(fname)
+ open(fname) {|f|
+ return f.read
+ }
+ end
+end
+
+def File.binread(fname)
+ open(fname, 'rb') {|f|
+ return f.read
+ }
+end
+
+# for corrupted windows stat(2)
+def File.dir?(path)
+ File.directory?((path[-1,1] == '/') ? path : path + '/')
+end
+
+
+class SetupError < StandardError; end
+
+def setup_rb_error(msg)
+ raise SetupError, msg
+end
+
+#
+# Config
+#
+
+if arg = ARGV.detect {|arg| /\A--rbconfig=/ =~ arg }
+ ARGV.delete(arg)
+ require arg.split(/=/, 2)[1]
+ $".push 'rbconfig.rb'
+else
+ require 'rbconfig'
+end
+
+def multipackage_install?
+ FileTest.directory?(File.dirname($0) + '/packages')
+end
+
+
+class ConfigItem
+ def initialize(name, template, default, desc)
+ @name = name.freeze
+ @template = template
+ @value = default
+ @default = default.dup.freeze
+ @description = desc
+ end
+
+ attr_reader :name
+ attr_reader :description
+
+ attr_accessor :default
+ alias help_default default
+
+ def help_opt
+ "--#{@name}=#{@template}"
+ end
+
+ def value
+ @value
+ end
+
+ def eval(table)
+ @value.gsub(%r<\$([^/]+)>) { table[$1] }
+ end
+
+ def set(val)
+ @value = check(val)
+ end
+
+ private
+
+ def check(val)
+ setup_rb_error "config: --#{name} requires argument" unless val
+ val
+ end
+end
+
+class BoolItem < ConfigItem
+ def config_type
+ 'bool'
+ end
+
+ def help_opt
+ "--#{@name}"
+ end
+
+ private
+
+ def check(val)
+ return 'yes' unless val
+ unless /\A(y(es)?|n(o)?|t(rue)?|f(alse))\z/i =~ val
+ setup_rb_error "config: --#{@name} accepts only yes/no for argument"
+ end
+ (/\Ay(es)?|\At(rue)/i =~ value) ? 'yes' : 'no'
+ end
+end
+
+class PathItem < ConfigItem
+ def config_type
+ 'path'
+ end
+
+ private
+
+ def check(path)
+ setup_rb_error "config: --#{@name} requires argument" unless path
+ path[0,1] == '$' ? path : File.expand_path(path)
+ end
+end
+
+class ProgramItem < ConfigItem
+ def config_type
+ 'program'
+ end
+end
+
+class SelectItem < ConfigItem
+ def initialize(name, template, default, desc)
+ super
+ @ok = template.split('/')
+ end
+
+ def config_type
+ 'select'
+ end
+
+ private
+
+ def check(val)
+ unless @ok.include?(val.strip)
+ setup_rb_error "config: use --#{@name}=#{@template} (#{val})"
+ end
+ val.strip
+ end
+end
+
+class PackageSelectionItem < ConfigItem
+ def initialize(name, template, default, help_default, desc)
+ super name, template, default, desc
+ @help_default = help_default
+ end
+
+ attr_reader :help_default
+
+ def config_type
+ 'package'
+ end
+
+ private
+
+ def check(val)
+ unless File.dir?("packages/#{val}")
+ setup_rb_error "config: no such package: #{val}"
+ end
+ val
+ end
+end
+
+class ConfigTable_class
+
+ def initialize(items)
+ @items = items
+ @table = {}
+ items.each do |i|
+ @table[i.name] = i
+ end
+ ALIASES.each do |ali, name|
+ @table[ali] = @table[name]
+ end
+ end
+
+ include Enumerable
+
+ def each(&block)
+ @items.each(&block)
+ end
+
+ def key?(name)
+ @table.key?(name)
+ end
+
+ def lookup(name)
+ @table[name] or raise ArgumentError, "no such config item: #{name}"
+ end
+
+ def add(item)
+ @items.push item
+ @table[item.name] = item
+ end
+
+ def remove(name)
+ item = lookup(name)
+ @items.delete_if {|i| i.name == name }
+ @table.delete_if {|name, i| i.name == name }
+ item
+ end
+
+ def new
+ dup()
+ end
+
+ def savefile
+ '.config'
+ end
+
+ def load
+ begin
+ t = dup()
+ File.foreach(savefile()) do |line|
+ k, v = *line.split(/=/, 2)
+ t[k] = v.strip
+ end
+ t
+ rescue Errno::ENOENT
+ setup_rb_error $!.message + "#{File.basename($0)} config first"
+ end
+ end
+
+ def save
+ @items.each {|i| i.value }
+ File.open(savefile(), 'w') {|f|
+ @items.each do |i|
+ f.printf "%s=%s\n", i.name, i.value if i.value
+ end
+ }
+ end
+
+ def [](key)
+ lookup(key).eval(self)
+ end
+
+ def []=(key, val)
+ lookup(key).set val
+ end
+
+end
+
+c = ::Config::CONFIG
+
+rubypath = c['bindir'] + '/' + c['ruby_install_name']
+
+major = c['MAJOR'].to_i
+minor = c['MINOR'].to_i
+teeny = c['TEENY'].to_i
+version = "#{major}.#{minor}"
+
+# ruby ver. >= 1.4.4?
+newpath_p = ((major >= 2) or
+ ((major == 1) and
+ ((minor >= 5) or
+ ((minor == 4) and (teeny >= 4)))))
+
+if c['rubylibdir']
+ # V < 1.6.3
+ _stdruby = c['rubylibdir']
+ _siteruby = c['sitedir']
+ _siterubyver = c['sitelibdir']
+ _siterubyverarch = c['sitearchdir']
+elsif newpath_p
+ # 1.4.4 <= V <= 1.6.3
+ _stdruby = "$prefix/lib/ruby/#{version}"
+ _siteruby = c['sitedir']
+ _siterubyver = "$siteruby/#{version}"
+ _siterubyverarch = "$siterubyver/#{c['arch']}"
+else
+ # V < 1.4.4
+ _stdruby = "$prefix/lib/ruby/#{version}"
+ _siteruby = "$prefix/lib/ruby/#{version}/site_ruby"
+ _siterubyver = _siteruby
+ _siterubyverarch = "$siterubyver/#{c['arch']}"
+end
+libdir = '-* dummy libdir *-'
+stdruby = '-* dummy rubylibdir *-'
+siteruby = '-* dummy site_ruby *-'
+siterubyver = '-* dummy site_ruby version *-'
+parameterize = lambda {|path|
+ path.sub(/\A#{Regexp.quote(c['prefix'])}/, '$prefix')\
+ .sub(/\A#{Regexp.quote(libdir)}/, '$libdir')\
+ .sub(/\A#{Regexp.quote(stdruby)}/, '$stdruby')\
+ .sub(/\A#{Regexp.quote(siteruby)}/, '$siteruby')\
+ .sub(/\A#{Regexp.quote(siterubyver)}/, '$siterubyver')
+}
+libdir = parameterize.call(c['libdir'])
+stdruby = parameterize.call(_stdruby)
+siteruby = parameterize.call(_siteruby)
+siterubyver = parameterize.call(_siterubyver)
+siterubyverarch = parameterize.call(_siterubyverarch)
+
+if arg = c['configure_args'].split.detect {|arg| /--with-make-prog=/ =~ arg }
+ makeprog = arg.sub(/'/, '').split(/=/, 2)[1]
+else
+ makeprog = 'make'
+end
+
+common_conf = [
+ PathItem.new('prefix', 'path', c['prefix'],
+ 'path prefix of target environment'),
+ PathItem.new('bindir', 'path', parameterize.call(c['bindir']),
+ 'the directory for commands'),
+ PathItem.new('libdir', 'path', libdir,
+ 'the directory for libraries'),
+ PathItem.new('datadir', 'path', parameterize.call(c['datadir']),
+ 'the directory for shared data'),
+ PathItem.new('mandir', 'path', parameterize.call(c['mandir']),
+ 'the directory for man pages'),
+ PathItem.new('sysconfdir', 'path', parameterize.call(c['sysconfdir']),
+ 'the directory for man pages'),
+ PathItem.new('stdruby', 'path', stdruby,
+ 'the directory for standard ruby libraries'),
+ PathItem.new('siteruby', 'path', siteruby,
+ 'the directory for version-independent aux ruby libraries'),
+ PathItem.new('siterubyver', 'path', siterubyver,
+ 'the directory for aux ruby libraries'),
+ PathItem.new('siterubyverarch', 'path', siterubyverarch,
+ 'the directory for aux ruby binaries'),
+ PathItem.new('rbdir', 'path', '$siterubyver',
+ 'the directory for ruby scripts'),
+ PathItem.new('sodir', 'path', '$siterubyverarch',
+ 'the directory for ruby extentions'),
+ PathItem.new('rubypath', 'path', rubypath,
+ 'the path to set to #! line'),
+ ProgramItem.new('rubyprog', 'name', rubypath,
+ 'the ruby program using for installation'),
+ ProgramItem.new('makeprog', 'name', makeprog,
+ 'the make program to compile ruby extentions'),
+ SelectItem.new('shebang', 'all/ruby/never', 'ruby',
+ 'shebang line (#!) editing mode'),
+ BoolItem.new('without-ext', 'yes/no', 'no',
+ 'does not compile/install ruby extentions')
+]
+class ConfigTable_class # open again
+ ALIASES = {
+ 'std-ruby' => 'stdruby',
+ 'site-ruby-common' => 'siteruby', # For backward compatibility
+ 'site-ruby' => 'siterubyver', # For backward compatibility
+ 'bin-dir' => 'bindir',
+ 'bin-dir' => 'bindir',
+ 'rb-dir' => 'rbdir',
+ 'so-dir' => 'sodir',
+ 'data-dir' => 'datadir',
+ 'ruby-path' => 'rubypath',
+ 'ruby-prog' => 'rubyprog',
+ 'ruby' => 'rubyprog',
+ 'make-prog' => 'makeprog',
+ 'make' => 'makeprog'
+ }
+end
+multipackage_conf = [
+ PackageSelectionItem.new('with', 'name,name...', '', 'ALL',
+ 'package names that you want to install'),
+ PackageSelectionItem.new('without', 'name,name...', '', 'NONE',
+ 'package names that you do not want to install')
+]
+if multipackage_install?
+ ConfigTable = ConfigTable_class.new(common_conf + multipackage_conf)
+else
+ ConfigTable = ConfigTable_class.new(common_conf)
+end
+
+
+module MetaConfigAPI
+
+ def eval_file_ifexist(fname)
+ instance_eval File.read(fname), fname, 1 if File.file?(fname)
+ end
+
+ def config_names
+ ConfigTable.map {|i| i.name }
+ end
+
+ def config?(name)
+ ConfigTable.key?(name)
+ end
+
+ def bool_config?(name)
+ ConfigTable.lookup(name).config_type == 'bool'
+ end
+
+ def path_config?(name)
+ ConfigTable.lookup(name).config_type == 'path'
+ end
+
+ def value_config?(name)
+ case ConfigTable.lookup(name).config_type
+ when 'bool', 'path'
+ true
+ else
+ false
+ end
+ end
+
+ def add_config(item)
+ ConfigTable.add item
+ end
+
+ def add_bool_config(name, default, desc)
+ ConfigTable.add BoolItem.new(name, 'yes/no', default ? 'yes' : 'no', desc)
+ end
+
+ def add_path_config(name, default, desc)
+ ConfigTable.add PathItem.new(name, 'path', default, desc)
+ end
+
+ def set_config_default(name, default)
+ ConfigTable.lookup(name).default = default
+ end
+
+ def remove_config(name)
+ ConfigTable.remove(name)
+ end
+
+end
+
+
+#
+# File Operations
+#
+
+module FileOperations
+
+ def mkdir_p(dirname, prefix = nil)
+ dirname = prefix + File.expand_path(dirname) if prefix
+ $stderr.puts "mkdir -p #{dirname}" if verbose?
+ return if no_harm?
+
+ # does not check '/'... it's too abnormal case
+ dirs = File.expand_path(dirname).split(%r<(?=/)>)
+ if /\A[a-z]:\z/i =~ dirs[0]
+ disk = dirs.shift
+ dirs[0] = disk + dirs[0]
+ end
+ dirs.each_index do |idx|
+ path = dirs[0..idx].join('')
+ Dir.mkdir path unless File.dir?(path)
+ end
+ end
+
+ def rm_f(fname)
+ $stderr.puts "rm -f #{fname}" if verbose?
+ return if no_harm?
+
+ if File.exist?(fname) or File.symlink?(fname)
+ File.chmod 0777, fname
+ File.unlink fname
+ end
+ end
+
+ def rm_rf(dn)
+ $stderr.puts "rm -rf #{dn}" if verbose?
+ return if no_harm?
+
+ Dir.chdir dn
+ Dir.foreach('.') do |fn|
+ next if fn == '.'
+ next if fn == '..'
+ if File.dir?(fn)
+ verbose_off {
+ rm_rf fn
+ }
+ else
+ verbose_off {
+ rm_f fn
+ }
+ end
+ end
+ Dir.chdir '..'
+ Dir.rmdir dn
+ end
+
+ def move_file(src, dest)
+ File.unlink dest if File.exist?(dest)
+ begin
+ File.rename src, dest
+ rescue
+ File.open(dest, 'wb') {|f| f.write File.binread(src) }
+ File.chmod File.stat(src).mode, dest
+ File.unlink src
+ end
+ end
+
+ def install(from, dest, mode, prefix = nil)
+ $stderr.puts "install #{from} #{dest}" if verbose?
+ return if no_harm?
+
+ realdest = prefix ? prefix + File.expand_path(dest) : dest
+ realdest = File.join(realdest, File.basename(from)) if File.dir?(realdest)
+ str = File.binread(from)
+ if diff?(str, realdest)
+ verbose_off {
+ rm_f realdest if File.exist?(realdest)
+ }
+ File.open(realdest, 'wb') {|f|
+ f.write str
+ }
+ File.chmod mode, realdest
+
+ File.open("#{objdir_root()}/InstalledFiles", 'a') {|f|
+ if prefix
+ f.puts realdest.sub(prefix, '')
+ else
+ f.puts realdest
+ end
+ }
+ end
+ end
+
+ def diff?(new_content, path)
+ return true unless File.exist?(path)
+ new_content != File.binread(path)
+ end
+
+ def command(str)
+ $stderr.puts str if verbose?
+ system str or raise RuntimeError, "'system #{str}' failed"
+ end
+
+ def ruby(str)
+ command config('rubyprog') + ' ' + str
+ end
+
+ def make(task = '')
+ command config('makeprog') + ' ' + task
+ end
+
+ def extdir?(dir)
+ File.exist?(dir + '/MANIFEST')
+ end
+
+ def all_files_in(dirname)
+ Dir.open(dirname) {|d|
+ return d.select {|ent| File.file?("#{dirname}/#{ent}") }
+ }
+ end
+
+ REJECT_DIRS = %w(
+ CVS SCCS RCS CVS.adm .svn
+ )
+
+ def all_dirs_in(dirname)
+ Dir.open(dirname) {|d|
+ return d.select {|n| File.dir?("#{dirname}/#{n}") } - %w(. ..) - REJECT_DIRS
+ }
+ end
+
+end
+
+
+#
+# Main Installer
+#
+
+module HookUtils
+
+ def run_hook(name)
+ try_run_hook "#{curr_srcdir()}/#{name}" or
+ try_run_hook "#{curr_srcdir()}/#{name}.rb"
+ end
+
+ def try_run_hook(fname)
+ return false unless File.file?(fname)
+ begin
+ instance_eval File.read(fname), fname, 1
+ rescue
+ setup_rb_error "hook #{fname} failed:\n" + $!.message
+ end
+ true
+ end
+
+end
+
+
+module HookScriptAPI
+
+ def get_config(key)
+ @config[key]
+ end
+
+ alias config get_config
+
+ def set_config(key, val)
+ @config[key] = val
+ end
+
+ #
+ # srcdir/objdir (works only in the package directory)
+ #
+
+ #abstract srcdir_root
+ #abstract objdir_root
+ #abstract relpath
+
+ def curr_srcdir
+ "#{srcdir_root()}/#{relpath()}"
+ end
+
+ def curr_objdir
+ "#{objdir_root()}/#{relpath()}"
+ end
+
+ def srcfile(path)
+ "#{curr_srcdir()}/#{path}"
+ end
+
+ def srcexist?(path)
+ File.exist?(srcfile(path))
+ end
+
+ def srcdirectory?(path)
+ File.dir?(srcfile(path))
+ end
+
+ def srcfile?(path)
+ File.file? srcfile(path)
+ end
+
+ def srcentries(path = '.')
+ Dir.open("#{curr_srcdir()}/#{path}") {|d|
+ return d.to_a - %w(. ..)
+ }
+ end
+
+ def srcfiles(path = '.')
+ srcentries(path).select {|fname|
+ File.file?(File.join(curr_srcdir(), path, fname))
+ }
+ end
+
+ def srcdirectories(path = '.')
+ srcentries(path).select {|fname|
+ File.dir?(File.join(curr_srcdir(), path, fname))
+ }
+ end
+
+end
+
+
+class ToplevelInstaller
+
+ Version = '3.3.1'
+ Copyright = 'Copyright (c) 2000-2004 Minero Aoki'
+
+ TASKS = [
+ [ 'all', 'do config, setup, then install' ],
+ [ 'config', 'saves your configurations' ],
+ [ 'show', 'shows current configuration' ],
+ [ 'setup', 'compiles ruby extentions and others' ],
+ [ 'install', 'installs files' ],
+ [ 'clean', "does `make clean' for each extention" ],
+ [ 'distclean',"does `make distclean' for each extention" ]
+ ]
+
+ def ToplevelInstaller.invoke
+ instance().invoke
+ end
+
+ @singleton = nil
+
+ def ToplevelInstaller.instance
+ @singleton ||= new(File.dirname($0))
+ @singleton
+ end
+
+ include MetaConfigAPI
+
+ def initialize(ardir_root)
+ @config = nil
+ @options = { 'verbose' => true }
+ @ardir = File.expand_path(ardir_root)
+ end
+
+ def inspect
+ "#<#{self.class} #{__id__()}>"
+ end
+
+ def invoke
+ run_metaconfigs
+ case task = parsearg_global()
+ when nil, 'all'
+ @config = load_config('config')
+ parsearg_config
+ init_installers
+ exec_config
+ exec_setup
+ exec_install
+ else
+ @config = load_config(task)
+ __send__ "parsearg_#{task}"
+ init_installers
+ __send__ "exec_#{task}"
+ end
+ end
+
+ def run_metaconfigs
+ eval_file_ifexist "#{@ardir}/metaconfig"
+ end
+
+ def load_config(task)
+ case task
+ when 'config'
+ ConfigTable.new
+ when 'clean', 'distclean'
+ if File.exist?(ConfigTable.savefile)
+ then ConfigTable.load
+ else ConfigTable.new
+ end
+ else
+ ConfigTable.load
+ end
+ end
+
+ def init_installers
+ @installer = Installer.new(@config, @options, @ardir, File.expand_path('.'))
+ end
+
+ #
+ # Hook Script API bases
+ #
+
+ def srcdir_root
+ @ardir
+ end
+
+ def objdir_root
+ '.'
+ end
+
+ def relpath
+ '.'
+ end
+
+ #
+ # Option Parsing
+ #
+
+ def parsearg_global
+ valid_task = /\A(?:#{TASKS.map {|task,desc| task }.join '|'})\z/
+
+ while arg = ARGV.shift
+ case arg
+ when /\A\w+\z/
+ setup_rb_error "invalid task: #{arg}" unless valid_task =~ arg
+ return arg
+
+ when '-q', '--quiet'
+ @options['verbose'] = false
+
+ when '--verbose'
+ @options['verbose'] = true
+
+ when '-h', '--help'
+ print_usage $stdout
+ exit 0
+
+ when '-v', '--version'
+ puts "#{File.basename($0)} version #{Version}"
+ exit 0
+
+ when '--copyright'
+ puts Copyright
+ exit 0
+
+ else
+ setup_rb_error "unknown global option '#{arg}'"
+ end
+ end
+
+ nil
+ end
+
+
+ def parsearg_no_options
+ unless ARGV.empty?
+ setup_rb_error "#{task}: unknown options: #{ARGV.join ' '}"
+ end
+ end
+
+ alias parsearg_show parsearg_no_options
+ alias parsearg_setup parsearg_no_options
+ alias parsearg_clean parsearg_no_options
+ alias parsearg_distclean parsearg_no_options
+
+ def parsearg_config
+ re = /\A--(#{ConfigTable.map {|i| i.name }.join('|')})(?:=(.*))?\z/
+ @options['config-opt'] = []
+
+ while i = ARGV.shift
+ if /\A--?\z/ =~ i
+ @options['config-opt'] = ARGV.dup
+ break
+ end
+ m = re.match(i) or setup_rb_error "config: unknown option #{i}"
+ name, value = *m.to_a[1,2]
+ @config[name] = value
+ end
+ end
+
+ def parsearg_install
+ @options['no-harm'] = false
+ @options['install-prefix'] = ''
+ while a = ARGV.shift
+ case a
+ when /\A--no-harm\z/
+ @options['no-harm'] = true
+ when /\A--prefix=(.*)\z/
+ path = $1
+ path = File.expand_path(path) unless path[0,1] == '/'
+ @options['install-prefix'] = path
+ else
+ setup_rb_error "install: unknown option #{a}"
+ end
+ end
+ end
+
+ def print_usage(out)
+ out.puts 'Typical Installation Procedure:'
+ out.puts " $ ruby #{File.basename $0} config"
+ out.puts " $ ruby #{File.basename $0} setup"
+ out.puts " # ruby #{File.basename $0} install (may require root privilege)"
+ out.puts
+ out.puts 'Detailed Usage:'
+ out.puts " ruby #{File.basename $0} <global option>"
+ out.puts " ruby #{File.basename $0} [<global options>] <task> [<task options>]"
+
+ fmt = " %-24s %s\n"
+ out.puts
+ out.puts 'Global options:'
+ out.printf fmt, '-q,--quiet', 'suppress message outputs'
+ out.printf fmt, ' --verbose', 'output messages verbosely'
+ out.printf fmt, '-h,--help', 'print this message'
+ out.printf fmt, '-v,--version', 'print version and quit'
+ out.printf fmt, ' --copyright', 'print copyright and quit'
+ out.puts
+ out.puts 'Tasks:'
+ TASKS.each do |name, desc|
+ out.printf fmt, name, desc
+ end
+
+ fmt = " %-24s %s [%s]\n"
+ out.puts
+ out.puts 'Options for CONFIG or ALL:'
+ ConfigTable.each do |item|
+ out.printf fmt, item.help_opt, item.description, item.help_default
+ end
+ out.printf fmt, '--rbconfig=path', 'rbconfig.rb to load',"running ruby's"
+ out.puts
+ out.puts 'Options for INSTALL:'
+ out.printf fmt, '--no-harm', 'only display what to do if given', 'off'
+ out.printf fmt, '--prefix=path', 'install path prefix', '$prefix'
+ out.puts
+ end
+
+ #
+ # Task Handlers
+ #
+
+ def exec_config
+ @installer.exec_config
+ @config.save # must be final
+ end
+
+ def exec_setup
+ @installer.exec_setup
+ end
+
+ def exec_install
+ @installer.exec_install
+ end
+
+ def exec_show
+ ConfigTable.each do |i|
+ printf "%-20s %s\n", i.name, i.value
+ end
+ end
+
+ def exec_clean
+ @installer.exec_clean
+ end
+
+ def exec_distclean
+ @installer.exec_distclean
+ end
+
+end
+
+
+class ToplevelInstallerMulti < ToplevelInstaller
+
+ include HookUtils
+ include HookScriptAPI
+ include FileOperations
+
+ def initialize(ardir)
+ super
+ @packages = all_dirs_in("#{@ardir}/packages")
+ raise 'no package exists' if @packages.empty?
+ end
+
+ def run_metaconfigs
+ eval_file_ifexist "#{@ardir}/metaconfig"
+ @packages.each do |name|
+ eval_file_ifexist "#{@ardir}/packages/#{name}/metaconfig"
+ end
+ end
+
+ def init_installers
+ @installers = {}
+ @packages.each do |pack|
+ @installers[pack] = Installer.new(@config, @options,
+ "#{@ardir}/packages/#{pack}",
+ "packages/#{pack}")
+ end
+
+ with = extract_selection(config('with'))
+ without = extract_selection(config('without'))
+ @selected = @installers.keys.select {|name|
+ (with.empty? or with.include?(name)) \
+ and not without.include?(name)
+ }
+ end
+
+ def extract_selection(list)
+ a = list.split(/,/)
+ a.each do |name|
+ setup_rb_error "no such package: #{name}" unless @installers.key?(name)
+ end
+ a
+ end
+
+ def print_usage(f)
+ super
+ f.puts 'Inluded packages:'
+ f.puts ' ' + @packages.sort.join(' ')
+ f.puts
+ end
+
+ #
+ # multi-package metaconfig API
+ #
+
+ attr_reader :packages
+
+ def declare_packages(list)
+ raise 'package list is empty' if list.empty?
+ list.each do |name|
+ raise "directory packages/#{name} does not exist"\
+ unless File.dir?("#{@ardir}/packages/#{name}")
+ end
+ @packages = list
+ end
+
+ #
+ # Task Handlers
+ #
+
+ def exec_config
+ run_hook 'pre-config'
+ each_selected_installers {|inst| inst.exec_config }
+ run_hook 'post-config'
+ @config.save # must be final
+ end
+
+ def exec_setup
+ run_hook 'pre-setup'
+ each_selected_installers {|inst| inst.exec_setup }
+ run_hook 'post-setup'
+ end
+
+ def exec_install
+ run_hook 'pre-install'
+ each_selected_installers {|inst| inst.exec_install }
+ run_hook 'post-install'
+ end
+
+ def exec_clean
+ rm_f ConfigTable.savefile
+ run_hook 'pre-clean'
+ each_selected_installers {|inst| inst.exec_clean }
+ run_hook 'post-clean'
+ end
+
+ def exec_distclean
+ rm_f ConfigTable.savefile
+ run_hook 'pre-distclean'
+ each_selected_installers {|inst| inst.exec_distclean }
+ run_hook 'post-distclean'
+ end
+
+ #
+ # lib
+ #
+
+ def each_selected_installers
+ Dir.mkdir 'packages' unless File.dir?('packages')
+ @selected.each do |pack|
+ $stderr.puts "Processing the package `#{pack}' ..." if @options['verbose']
+ Dir.mkdir "packages/#{pack}" unless File.dir?("packages/#{pack}")
+ Dir.chdir "packages/#{pack}"
+ yield @installers[pack]
+ Dir.chdir '../..'
+ end
+ end
+
+ def verbose?
+ @options['verbose']
+ end
+
+ def no_harm?
+ @options['no-harm']
+ end
+
+end
+
+
+class Installer
+
+ FILETYPES = %w( bin lib ext data )
+
+ include HookScriptAPI
+ include HookUtils
+ include FileOperations
+
+ def initialize(config, opt, srcroot, objroot)
+ @config = config
+ @options = opt
+ @srcdir = File.expand_path(srcroot)
+ @objdir = File.expand_path(objroot)
+ @currdir = '.'
+ end
+
+ def inspect
+ "#<#{self.class} #{File.basename(@srcdir)}>"
+ end
+
+ #
+ # Hook Script API base methods
+ #
+
+ def srcdir_root
+ @srcdir
+ end
+
+ def objdir_root
+ @objdir
+ end
+
+ def relpath
+ @currdir
+ end
+
+ #
+ # configs/options
+ #
+
+ def no_harm?
+ @options['no-harm']
+ end
+
+ def verbose?
+ @options['verbose']
+ end
+
+ def verbose_off
+ begin
+ save, @options['verbose'] = @options['verbose'], false
+ yield
+ ensure
+ @options['verbose'] = save
+ end
+ end
+
+ #
+ # TASK config
+ #
+
+ def exec_config
+ exec_task_traverse 'config'
+ end
+
+ def config_dir_bin(rel)
+ end
+
+ def config_dir_lib(rel)
+ end
+
+ def config_dir_ext(rel)
+ extconf if extdir?(curr_srcdir())
+ end
+
+ def extconf
+ opt = @options['config-opt'].join(' ')
+ command "#{config('rubyprog')} #{curr_srcdir()}/extconf.rb #{opt}"
+ end
+
+ def config_dir_data(rel)
+ end
+
+ #
+ # TASK setup
+ #
+
+ def exec_setup
+ exec_task_traverse 'setup'
+ end
+
+ def setup_dir_bin(rel)
+ all_files_in(curr_srcdir()).each do |fname|
+ adjust_shebang "#{curr_srcdir()}/#{fname}"
+ end
+ end
+
+ def adjust_shebang(path)
+ return if no_harm?
+ tmpfile = File.basename(path) + '.tmp'
+ begin
+ File.open(path, 'rb') {|r|
+ first = r.gets
+ return unless File.basename(config('rubypath')) == 'ruby'
+ return unless File.basename(first.sub(/\A\#!/, '').split[0]) == 'ruby'
+ $stderr.puts "adjusting shebang: #{File.basename(path)}" if verbose?
+ File.open(tmpfile, 'wb') {|w|
+ w.print first.sub(/\A\#!\s*\S+/, '#! ' + config('rubypath'))
+ w.write r.read
+ }
+ move_file tmpfile, File.basename(path)
+ }
+ ensure
+ File.unlink tmpfile if File.exist?(tmpfile)
+ end
+ end
+
+ def setup_dir_lib(rel)
+ end
+
+ def setup_dir_ext(rel)
+ make if extdir?(curr_srcdir())
+ end
+
+ def setup_dir_data(rel)
+ end
+
+ #
+ # TASK install
+ #
+
+ def exec_install
+ rm_f 'InstalledFiles'
+ exec_task_traverse 'install'
+ end
+
+ def install_dir_bin(rel)
+ install_files collect_filenames_auto(), "#{config('bindir')}/#{rel}", 0755
+ end
+
+ def install_dir_lib(rel)
+ install_files ruby_scripts(), "#{config('rbdir')}/#{rel}", 0644
+ end
+
+ def install_dir_ext(rel)
+ return unless extdir?(curr_srcdir())
+ install_files ruby_extentions('.'),
+ "#{config('sodir')}/#{File.dirname(rel)}",
+ 0644 # This was 0555, why?! - Paul <paulvt at debian.org>
+ end
+
+ def install_dir_data(rel)
+ install_files collect_filenames_auto(), "#{config('datadir')}/#{rel}", 0644
+ end
+
+ def install_files(list, dest, mode)
+ mkdir_p dest, @options['install-prefix']
+ list.each do |fname|
+ install fname, dest, mode, @options['install-prefix']
+ end
+ end
+
+ def ruby_scripts
+ collect_filenames_auto().select {|n| /\.rb\z/ =~ n }
+ end
+
+ # picked up many entries from cvs-1.11.1/src/ignore.c
+ reject_patterns = %w(
+ core RCSLOG tags TAGS .make.state
+ .nse_depinfo #* .#* cvslog.* ,* .del-* *.olb
+ *~ *.old *.bak *.BAK *.orig *.rej _$* *$
+
+ *.org *.in .*
+ )
+ mapping = {
+ '.' => '\.',
+ '$' => '\$',
+ '#' => '\#',
+ '*' => '.*'
+ }
+ REJECT_PATTERNS = Regexp.new('\A(?:' +
+ reject_patterns.map {|pat|
+ pat.gsub(/[\.\$\#\*]/) {|ch| mapping[ch] }
+ }.join('|') +
+ ')\z')
+
+ def collect_filenames_auto
+ mapdir((existfiles() - hookfiles()).reject {|fname|
+ REJECT_PATTERNS =~ fname
+ })
+ end
+
+ def existfiles
+ all_files_in(curr_srcdir()) | all_files_in('.')
+ end
+
+ def hookfiles
+ %w( pre-%s post-%s pre-%s.rb post-%s.rb ).map {|fmt|
+ %w( config setup install clean ).map {|t| sprintf(fmt, t) }
+ }.flatten
+ end
+
+ def mapdir(filelist)
+ filelist.map {|fname|
+ if File.exist?(fname) # objdir
+ fname
+ else # srcdir
+ File.join(curr_srcdir(), fname)
+ end
+ }
+ end
+
+ def ruby_extentions(dir)
+ Dir.open(dir) {|d|
+ ents = d.select {|fname| /\.#{::Config::CONFIG['DLEXT']}\z/ =~ fname }
+ if ents.empty?
+ setup_rb_error "no ruby extention exists: 'ruby #{$0} setup' first"
+ end
+ return ents
+ }
+ end
+
+ #
+ # TASK clean
+ #
+
+ def exec_clean
+ exec_task_traverse 'clean'
+ rm_f ConfigTable.savefile
+ rm_f 'InstalledFiles'
+ end
+
+ def clean_dir_bin(rel)
+ end
+
+ def clean_dir_lib(rel)
+ end
+
+ def clean_dir_ext(rel)
+ return unless extdir?(curr_srcdir())
+ make 'clean' if File.file?('Makefile')
+ end
+
+ def clean_dir_data(rel)
+ end
+
+ #
+ # TASK distclean
+ #
+
+ def exec_distclean
+ exec_task_traverse 'distclean'
+ rm_f ConfigTable.savefile
+ rm_f 'InstalledFiles'
+ end
+
+ def distclean_dir_bin(rel)
+ end
+
+ def distclean_dir_lib(rel)
+ end
+
+ def distclean_dir_ext(rel)
+ return unless extdir?(curr_srcdir())
+ make 'distclean' if File.file?('Makefile')
+ end
+
+ #
+ # lib
+ #
+
+ def exec_task_traverse(task)
+ run_hook "pre-#{task}"
+ FILETYPES.each do |type|
+ if config('without-ext') == 'yes' and type == 'ext'
+ $stderr.puts 'skipping ext/* by user option' if verbose?
+ next
+ end
+ traverse task, type, "#{task}_dir_#{type}"
+ end
+ run_hook "post-#{task}"
+ end
+
+ def traverse(task, rel, mid)
+ dive_into(rel) {
+ run_hook "pre-#{task}"
+ __send__ mid, rel.sub(%r[\A.*?(?:/|\z)], '')
+ all_dirs_in(curr_srcdir()).each do |d|
+ traverse task, "#{rel}/#{d}", mid
+ end
+ run_hook "post-#{task}"
+ }
+ end
+
+ def dive_into(rel)
+ return unless File.dir?("#{@srcdir}/#{rel}")
+
+ dir = File.basename(rel)
+ Dir.mkdir dir unless File.dir?(dir)
+ prevdir = Dir.pwd
+ Dir.chdir dir
+ $stderr.puts '---> ' + rel if verbose?
+ @currdir = rel
+ yield
+ Dir.chdir prevdir
+ $stderr.puts '<--- ' + rel if verbose?
+ @currdir = File.dirname(rel)
+ end
+
+end
+
+
+if $0 == __FILE__
+ begin
+ if multipackage_install?
+ ToplevelInstallerMulti.invoke
+ else
+ ToplevelInstaller.invoke
+ end
+ rescue SetupError
+ raise if $DEBUG
+ $stderr.puts $!.message
+ $stderr.puts "Try 'ruby #{$0} --help' for detailed usage."
+ exit 1
+ end
+end
More information about the pkg-ruby-extras-maintainers
mailing list