[Pkg-rust-maintainers] Bug#1009015: cargo: FTBFS with libgit2 1.3.0

Mohammed Bilal mdbilal at disroot.org
Wed Apr 6 01:58:59 BST 2022


Package: cargo
Severity: important
X-Debbugs-Cc: mdbilal at disroot.org

Dear Maintainer,
  
cargo was found to fail to build during a test rebuild with libgit2 1.3.0 in unstable

Relevant part (Hopefully):

Install main build dependencies (apt-based resolver)
----------------------------------------------------

Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
 sbuild-build-depends-main-dummy : Depends: libgit2-dev (< 1.2~~) but 1.3.0+dfsg
.1-2 is to be installed
E: Unable to correct problems, you have held broken packages.
apt-get failed.
E: Package installation failed
Not removing build depends: cloned chroot in use
 

-- System Information:
Debian Release: bookworm/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 5.16.0-6-amd64 (SMP w/8 CPU threads; PREEMPT)
Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_CRAP, TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE
Locale: LANG=C.UTF-8, LC_CTYPE=C.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages cargo depends on:
ii  binutils             2.38-3
ii  gcc [c-compiler]     4:11.2.0-2
ii  gcc-10 [c-compiler]  10.3.0-15
ii  gcc-11 [c-compiler]  11.2.0-19
ii  libc6                2.33-7
ii  libcurl3-gnutls      7.82.0-2
ii  libgcc-s1            12-20220319-1
pn  libgit2-1.1          <none>
ii  libssh2-1            1.10.0-3
ii  libssl1.1            1.1.1n-1
pn  rustc                <none>
ii  zlib1g               1:1.2.11.dfsg-4

cargo recommends no packages.

Versions of packages cargo suggests:
pn  cargo-doc  <none>
ii  python3    3.10.4-1
-------------- next part --------------
sbuild (Debian sbuild) 0.83.0 (05 February 2022) on debian

+==============================================================================+
| cargo 0.57.0-5 (amd64)                       Tue, 05 Apr 2022 14:05:36 +0000 |
+==============================================================================+

Package: cargo
Version: 0.57.0-5
Source Version: 0.57.0-5
Distribution: unstable
Machine Architecture: amd64
Host Architecture: amd64
Build Architecture: amd64
Build Type: full

I: NOTICE: Log filtering will replace 'var/run/schroot/mount/unstable-amd64-sbuild-164aaa3c-f58f-4de2-aadb-5784a452b647' with '<<CHROOT>>'
I: NOTICE: Log filtering will replace 'build/cargo-Ikn3Mt/resolver-ka4qpW' with '<<RESOLVERDIR>>'

+------------------------------------------------------------------------------+
| Update chroot                                                                |
+------------------------------------------------------------------------------+

Get:1 file:/build/cargo-Ikn3Mt/resolver-HwDWZv/apt_archive ./ InRelease
Ign:1 file:/build/cargo-Ikn3Mt/resolver-HwDWZv/apt_archive ./ InRelease
Get:2 file:/build/cargo-Ikn3Mt/resolver-HwDWZv/apt_archive ./ Release [954 B]
Get:2 file:/build/cargo-Ikn3Mt/resolver-HwDWZv/apt_archive ./ Release [954 B]
Get:3 file:/build/cargo-Ikn3Mt/resolver-HwDWZv/apt_archive ./ Release.gpg
Ign:3 file:/build/cargo-Ikn3Mt/resolver-HwDWZv/apt_archive ./ Release.gpg
Get:4 file:/build/cargo-Ikn3Mt/resolver-HwDWZv/apt_archive ./ Packages [1243 B]
Err:4 file:/build/cargo-Ikn3Mt/resolver-HwDWZv/apt_archive ./ Packages
  Could not open file /build/cargo-Ikn3Mt/resolver-HwDWZv/apt_archive/./Packages - open (13: Permission denied)
Get:4 file:/build/cargo-Ikn3Mt/resolver-HwDWZv/apt_archive ./ Packages [3269 B]
Get:5 http://ftp.us.debian.org/debian unstable InRelease [165 kB]
Get:6 http://deb.debian.org/debian experimental InRelease [75.4 kB]
Get:7 http://deb.debian.org/debian experimental/main amd64 Packages [391 kB]
Get:8 http://ftp.us.debian.org/debian unstable/main Sources.diff/Index [63.6 kB]
Get:9 http://ftp.us.debian.org/debian unstable/main amd64 Packages.diff/Index [63.6 kB]
Get:10 http://ftp.us.debian.org/debian unstable/main Sources T-2022-04-05-0806.37-F-2022-04-04-0803.45.pdiff [44.0 kB]
Get:10 http://ftp.us.debian.org/debian unstable/main Sources T-2022-04-05-0806.37-F-2022-04-04-0803.45.pdiff [44.0 kB]
Get:11 http://ftp.us.debian.org/debian unstable/main amd64 Packages T-2022-04-05-0806.37-F-2022-04-04-0803.45.pdiff [57.1 kB]
Get:11 http://ftp.us.debian.org/debian unstable/main amd64 Packages T-2022-04-05-0806.37-F-2022-04-04-0803.45.pdiff [57.1 kB]
Fetched 861 kB in 6s (144 kB/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
Calculating upgrade...
The following packages will be upgraded:
  apt dpkg dpkg-dev libapt-pkg6.0 libdpkg-perl libgcrypt20 libpcre3 libzstd1
  linux-libc-dev
debconf: delaying package configuration, since apt-utils is not installed
9 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/11.9 MB of archives.
After this operation, 136 kB of additional disk space will be used.
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 12568 files and directories currently installed.)
Preparing to unpack .../libgcrypt20_1.10.1-2_amd64.deb ...
Unpacking libgcrypt20:amd64 (1.10.1-2) over (1.9.4-5) ...
Setting up libgcrypt20:amd64 (1.10.1-2) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 12568 files and directories currently installed.)
Preparing to unpack .../libzstd1_1.4.10+dfsg-1_amd64.deb ...
Unpacking libzstd1:amd64 (1.4.10+dfsg-1) over (1.4.9+dfsg-1) ...
Setting up libzstd1:amd64 (1.4.10+dfsg-1) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 12568 files and directories currently installed.)
Preparing to unpack .../libapt-pkg6.0_2.4.4_amd64.deb ...
Unpacking libapt-pkg6.0:amd64 (2.4.4) over (2.4.3) ...
Setting up libapt-pkg6.0:amd64 (2.4.4) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 12568 files and directories currently installed.)
Preparing to unpack .../archives/dpkg_1.21.7_amd64.deb ...
Unpacking dpkg (1.21.7) over (1.21.6) ...
Setting up dpkg (1.21.7) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 12568 files and directories currently installed.)
Preparing to unpack .../archives/apt_2.4.4_amd64.deb ...
Unpacking apt (2.4.4) over (2.4.3) ...
Setting up apt (2.4.4) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 12568 files and directories currently installed.)
Preparing to unpack .../libpcre3_2%3a8.39-14_amd64.deb ...
Unpacking libpcre3:amd64 (2:8.39-14) over (2:8.39-13) ...
Setting up libpcre3:amd64 (2:8.39-14) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 12568 files and directories currently installed.)
Preparing to unpack .../dpkg-dev_1.21.7_all.deb ...
Unpacking dpkg-dev (1.21.7) over (1.21.6) ...
Preparing to unpack .../libdpkg-perl_1.21.7_all.deb ...
Unpacking libdpkg-perl (1.21.7) over (1.21.6) ...
Preparing to unpack .../linux-libc-dev_5.16.18-1_amd64.deb ...
Unpacking linux-libc-dev:amd64 (5.16.18-1) over (5.16.14-1) ...
Setting up linux-libc-dev:amd64 (5.16.18-1) ...
Setting up libdpkg-perl (1.21.7) ...
Setting up dpkg-dev (1.21.7) ...
Processing triggers for libc-bin (2.33-7) ...

+------------------------------------------------------------------------------+
| Fetch source files                                                           |
+------------------------------------------------------------------------------+


Local sources
-------------

/tmp/tmp.MR9vCPd3S5/cargo_0.57.0-5.dsc exists in /tmp/tmp.MR9vCPd3S5; copying to chroot
I: NOTICE: Log filtering will replace 'build/cargo-Ikn3Mt/cargo-0.57.0' with '<<PKGBUILDDIR>>'
I: NOTICE: Log filtering will replace 'build/cargo-Ikn3Mt' with '<<BUILDDIR>>'

+------------------------------------------------------------------------------+
| Install package build dependencies                                           |
+------------------------------------------------------------------------------+


Setup apt archive
-----------------

Merged Build-Depends: debhelper (>= 12~), dpkg-dev (>= 1.17.14), cargo (>= 0.17.0), rustc (>= 1.16), libstd-rust-dev (>= 1.16), pkg-config, cmake, bash-completion, python3, libcurl4-gnutls-dev | libcurl4-openssl-dev, libssh2-1-dev, libgit2-dev (>= 1.1.0), libgit2-dev (<< 1.2~~), libhttp-parser-dev, libssl-dev, zlib1g-dev, git, build-essential, fakeroot
Filtered Build-Depends: debhelper (>= 12~), dpkg-dev (>= 1.17.14), cargo (>= 0.17.0), rustc (>= 1.16), libstd-rust-dev (>= 1.16), pkg-config, cmake, bash-completion, python3, libcurl4-gnutls-dev, libssh2-1-dev, libgit2-dev (>= 1.1.0), libgit2-dev (<< 1.2~~), libhttp-parser-dev, libssl-dev, zlib1g-dev, git, build-essential, fakeroot
dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-main-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [957 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [513 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [578 B]
Fetched 2048 B in 0s (0 B/s)
Reading package lists...
Get:1 file:/<<BUILDDIR>>/resolver-HwDWZv/apt_archive ./ InRelease
Ign:1 file:/<<BUILDDIR>>/resolver-HwDWZv/apt_archive ./ InRelease
Get:2 file:/<<BUILDDIR>>/resolver-HwDWZv/apt_archive ./ Release [954 B]
Get:2 file:/<<BUILDDIR>>/resolver-HwDWZv/apt_archive ./ Release [954 B]
Get:3 file:/<<BUILDDIR>>/resolver-HwDWZv/apt_archive ./ Release.gpg
Ign:3 file:/<<BUILDDIR>>/resolver-HwDWZv/apt_archive ./ Release.gpg
Reading package lists...
Hit:1 http://deb.debian.org/debian experimental InRelease
Reading package lists...
Reading package lists...

Install main build dependencies (apt-based resolver)
----------------------------------------------------

Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
 sbuild-build-depends-main-dummy : Depends: libgit2-dev (< 1.2~~) but 1.3.0+dfsg.1-2 is to be installed
E: Unable to correct problems, you have held broken packages.
apt-get failed.
E: Package installation failed
Not removing build depends: cloned chroot in use

Setup apt archive
-----------------

Merged Build-Depends: dose-distcheck
Filtered Build-Depends: dose-distcheck
dpkg-deb: building package 'sbuild-build-depends-dose3-dummy' in '/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-dose3-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [963 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [649 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [712 B]
Fetched 2324 B in 0s (0 B/s)
Reading package lists...
Get:1 file:/<<BUILDDIR>>/resolver-HwDWZv/apt_archive ./ InRelease
Ign:1 file:/<<BUILDDIR>>/resolver-HwDWZv/apt_archive ./ InRelease
Get:2 file:/<<BUILDDIR>>/resolver-HwDWZv/apt_archive ./ Release [954 B]
Get:2 file:/<<BUILDDIR>>/resolver-HwDWZv/apt_archive ./ Release [954 B]
Get:3 file:/<<BUILDDIR>>/resolver-HwDWZv/apt_archive ./ Release.gpg
Ign:3 file:/<<BUILDDIR>>/resolver-HwDWZv/apt_archive ./ Release.gpg
Reading package lists...
Hit:1 http://deb.debian.org/debian experimental InRelease
Reading package lists...
Reading package lists...

Install dose3 build dependencies (apt-based resolver)
-----------------------------------------------------

Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
  dose-distcheck
The following NEW packages will be installed:
  dose-distcheck sbuild-build-depends-dose3-dummy
0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 1067 kB of archives.
After this operation, 4362 kB of additional disk space will be used.
Get:1 copy:/<<RESOLVERDIR>>/apt_archive ./ sbuild-build-depends-dose3-dummy 0.invalid.0 [848 B]
Get:2 http://ftp.us.debian.org/debian unstable/main amd64 dose-distcheck amd64 7.0.0-1+b1 [1066 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 1067 kB in 7s (146 kB/s)
Selecting previously unselected package dose-distcheck.
(Reading database ... 12573 files and directories currently installed.)
Preparing to unpack .../dose-distcheck_7.0.0-1+b1_amd64.deb ...
Unpacking dose-distcheck (7.0.0-1+b1) ...
Selecting previously unselected package sbuild-build-depends-dose3-dummy.
Preparing to unpack .../sbuild-build-depends-dose3-dummy_0.invalid.0_amd64.deb ...
Unpacking sbuild-build-depends-dose3-dummy (0.invalid.0) ...
Setting up dose-distcheck (7.0.0-1+b1) ...
Setting up sbuild-build-depends-dose3-dummy (0.invalid.0) ...
(I)Doseparse: Parsing and normalizing...
(I)Dose_deb: Parsing Packages file -...
(I)Dose_common: total packages 68892
(I)Dose_applications: Cudf Universe: 68892 packages
(I)Dose_applications: --checkonly specified, consider all packages as background packages
(I)Dose_applications: Solving...
output-version: 1.2
native-architecture: amd64
report:
 -
  package: sbuild-build-depends-main-dummy
  version: 0.invalid.0
  architecture: amd64
  status: ok
  installationset:
   -
    package: zlib1g-dev
    version: 1:1.2.11.dfsg-4
    architecture: amd64
   -
    package: zlib1g
    version: 1:1.2.11.dfsg-4
    architecture: amd64
   -
    package: xz-utils
    version: 5.2.5-2
    architecture: amd64
   -
    package: util-linux
    version: 2.37.3-1+b1
    architecture: amd64
    essential: true
   -
    package: tar
    version: 1.34+dfsg-1
    architecture: amd64
    essential: true
   -
    package: sysvinit-utils
    version: 3.01-1
    architecture: amd64
    essential: true
   -
    package: sensible-utils
    version: 0.0.17
    architecture: all
   -
    package: sed
    version: 4.8-1
    architecture: amd64
    essential: true
   -
    package: sbuild-build-depends-main-dummy
    version: 0.invalid.0
    architecture: amd64
   -
    package: rustc
    version: 1.58.1+dfsg1-1
    architecture: amd64
   -
    package: rpcsvc-proto
    version: 1.4.2-4
    architecture: amd64
   -
    package: readline-common
    version: 8.1.2-1
    architecture: all
   -
    package: python3.10-minimal
    version: 3.10.4-3
    architecture: amd64
   -
    package: python3.10
    version: 3.10.4-3
    architecture: amd64
   -
    package: python3-minimal
    version: 3.10.4-1
    architecture: amd64
   -
    package: python3
    version: 3.10.4-1
    architecture: amd64
   -
    package: procps
    version: 2:4.0.0-1
    architecture: amd64
   -
    package: po-debconf
    version: 1.0.21+nmu1
    architecture: all
   -
    package: pkg-config
    version: 0.29.2-1
    architecture: amd64
   -
    package: perl-modules-5.34
    version: 5.34.0-3
    architecture: all
   -
    package: perl-base
    version: 5.34.0-3
    architecture: amd64
    essential: true
   -
    package: perl
    version: 5.34.0-3
    architecture: amd64
   -
    package: patch
    version: 2.7.6-7
    architecture: amd64
   -
    package: original-awk
    version: 2018-08-27-1
    architecture: amd64
   -
    package: ncurses-bin
    version: 6.3-2
    architecture: amd64
    essential: true
   -
    package: ncurses-base
    version: 6.3-2
    architecture: all
    essential: true
   -
    package: media-types
    version: 7.0.0
    architecture: all
   -
    package: man-db
    version: 2.10.2-1
    architecture: amd64
   -
    package: make
    version: 4.3-4.1
    architecture: amd64
   -
    package: m4
    version: 1.4.18-5
    architecture: amd64
   -
    package: lsb-base
    version: 11.1.0
    architecture: all
   -
    package: login
    version: 1:4.11.1+dfsg1-2
    architecture: amd64
    essential: true
   -
    package: linux-libc-dev
    version: 5.16.18-1
    architecture: amd64
   -
    package: libzstd1
    version: 1.4.10+dfsg-1
    architecture: amd64
   -
    package: libz3-4
    version: 4.8.12-1+b1
    architecture: amd64
   -
    package: libxml2
    version: 2.9.13+dfsg-1
    architecture: amd64
   -
    package: libuv1
    version: 1.44.1-2
    architecture: amd64
   -
    package: libuuid1
    version: 2.37.3-1+b1
    architecture: amd64
   -
    package: libunistring2
    version: 1.0-1
    architecture: amd64
   -
    package: libudev1
    version: 250.4-1
    architecture: amd64
   -
    package: libuchardet0
    version: 0.0.7-1
    architecture: amd64
   -
    package: libubsan1
    version: 12-20220319-1
    architecture: amd64
   -
    package: libtsan0
    version: 11.2.0-19
    architecture: amd64
   -
    package: libtool
    version: 2.4.7-2
    architecture: all
   -
    package: libtirpc3
    version: 1.3.2-2
    architecture: amd64
   -
    package: libtirpc-dev
    version: 1.3.2-2
    architecture: amd64
   -
    package: libtirpc-common
    version: 1.3.2-2
    architecture: all
   -
    package: libtinfo6
    version: 6.3-2
    architecture: amd64
   -
    package: libtasn1-6
    version: 4.18.0-4
    architecture: amd64
   -
    package: libsub-override-perl
    version: 0.09-2
    architecture: all
   -
    package: libstdc++6
    version: 12-20220319-1
    architecture: amd64
   -
    package: libstdc++-11-dev
    version: 11.2.0-19
    architecture: amd64
   -
    package: libstd-rust-dev
    version: 1.58.1+dfsg1-1
    architecture: amd64
   -
    package: libstd-rust-1.58
    version: 1.58.1+dfsg1-1
    architecture: amd64
   -
    package: libssl3
    version: 3.0.2-1
    architecture: amd64
   -
    package: libssl1.1
    version: 1.1.1n-1
    architecture: amd64
   -
    package: libssl-dev
    version: 3.0.2-1
    architecture: amd64
   -
    package: libssh2-1-dev
    version: 1.10.0-3
    architecture: amd64
   -
    package: libssh2-1
    version: 1.10.0-3
    architecture: amd64
   -
    package: libsqlite3-0
    version: 3.38.2-1
    architecture: amd64
   -
    package: libsmartcols1
    version: 2.37.3-1+b1
    architecture: amd64
   -
    package: libsigsegv2
    version: 2.14-1
    architecture: amd64
   -
    package: libselinux1
    version: 3.3-1+b2
    architecture: amd64
   -
    package: libseccomp2
    version: 2.5.3-2
    architecture: amd64
   -
    package: libsasl2-modules-db
    version: 2.1.28+dfsg-2+b1
    architecture: amd64
   -
    package: libsasl2-2
    version: 2.1.28+dfsg-2+b1
    architecture: amd64
   -
    package: librtmp1
    version: 2.4+20151223.gitfa8646d.1-2+b2
    architecture: amd64
   -
    package: librhash0
    version: 1.4.2-1
    architecture: amd64
   -
    package: libreadline8
    version: 8.1.2-1
    architecture: amd64
   -
    package: libquadmath0
    version: 12-20220319-1
    architecture: amd64
   -
    package: libpython3.10-stdlib
    version: 3.10.4-3
    architecture: amd64
   -
    package: libpython3.10-minimal
    version: 3.10.4-3
    architecture: amd64
   -
    package: libpython3-stdlib
    version: 3.10.4-1
    architecture: amd64
   -
    package: libpsl5
    version: 0.21.0-1.2
    architecture: amd64
   -
    package: libproc-2-0
    version: 2:4.0.0-1
    architecture: amd64
   -
    package: libpipeline1
    version: 1.5.5-1
    architecture: amd64
   -
    package: libperl5.34
    version: 5.34.0-3
    architecture: amd64
   -
    package: libpcrecpp0v5
    version: 2:8.39-14
    architecture: amd64
   -
    package: libpcre32-3
    version: 2:8.39-14
    architecture: amd64
   -
    package: libpcre3-dev
    version: 2:8.39-14
    architecture: amd64
   -
    package: libpcre3
    version: 2:8.39-14
    architecture: amd64
   -
    package: libpcre2-8-0
    version: 10.39-3
    architecture: amd64
   -
    package: libpcre16-3
    version: 2:8.39-14
    architecture: amd64
   -
    package: libpam0g
    version: 1.4.0-11
    architecture: amd64
   -
    package: libpam-runtime
    version: 1.4.0-11
    architecture: all
   -
    package: libpam-modules-bin
    version: 1.4.0-11
    architecture: amd64
   -
    package: libpam-modules
    version: 1.4.0-11
    architecture: amd64
   -
    package: libp11-kit0
    version: 0.24.0-6
    architecture: amd64
   -
    package: libnsl2
    version: 1.3.0-2
    architecture: amd64
   -
    package: libnsl-dev
    version: 1.3.0-2
    architecture: amd64
   -
    package: libnghttp2-14
    version: 1.43.0-1
    architecture: amd64
   -
    package: libnettle8
    version: 3.7.3-1
    architecture: amd64
   -
    package: libncursesw6
    version: 6.3-2
    architecture: amd64
   -
    package: libncurses6
    version: 6.3-2
    architecture: amd64
   -
    package: libmpfr6
    version: 4.1.0-3
    architecture: amd64
   -
    package: libmpdec3
    version: 2.5.1-2
    architecture: amd64
   -
    package: libmpc3
    version: 1.2.1-2
    architecture: amd64
   -
    package: libmount1
    version: 2.37.3-1+b1
    architecture: amd64
   -
    package: libmd0
    version: 1.0.4-1
    architecture: amd64
   -
    package: libmbedx509-1
    version: 2.28.0-1
    architecture: amd64
   -
    package: libmbedtls14
    version: 2.28.0-1
    architecture: amd64
   -
    package: libmbedtls-dev
    version: 2.28.0-1
    architecture: amd64
   -
    package: libmbedcrypto7
    version: 2.28.0-1
    architecture: amd64
   -
    package: libmagic1
    version: 1:5.41-3
    architecture: amd64
   -
    package: libmagic-mgc
    version: 1:5.41-3
    architecture: amd64
   -
    package: liblzma5
    version: 5.2.5-2
    architecture: amd64
   -
    package: liblz4-1
    version: 1.9.3-2
    architecture: amd64
   -
    package: liblsan0
    version: 12-20220319-1
    architecture: amd64
   -
    package: libllvm13
    version: 1:13.0.1-3+b2
    architecture: amd64
   -
    package: libldap-2.5-0
    version: 2.5.11+dfsg-1
    architecture: amd64
   -
    package: libkrb5support0
    version: 1.19.2-2+b1
    architecture: amd64
   -
    package: libkrb5-3
    version: 1.19.2-2+b1
    architecture: amd64
   -
    package: libkeyutils1
    version: 1.6.1-3
    architecture: amd64
   -
    package: libk5crypto3
    version: 1.19.2-2+b1
    architecture: amd64
   -
    package: libjsoncpp25
    version: 1.9.5-4
    architecture: amd64
   -
    package: libitm1
    version: 12-20220319-1
    architecture: amd64
   -
    package: libisl23
    version: 0.24-2
    architecture: amd64
   -
    package: libidn2-0
    version: 2.3.2-2
    architecture: amd64
   -
    package: libicu67
    version: 67.1-7
    architecture: amd64
   -
    package: libhttp-parser2.9
    version: 2.9.4-4
    architecture: amd64
   -
    package: libhttp-parser-dev
    version: 2.9.4-4
    architecture: amd64
   -
    package: libhogweed6
    version: 3.7.3-1
    architecture: amd64
   -
    package: libgssapi-krb5-2
    version: 1.19.2-2+b1
    architecture: amd64
   -
    package: libgomp1
    version: 12-20220319-1
    architecture: amd64
   -
    package: libgnutls30
    version: 3.7.4-1
    architecture: amd64
   -
    package: libgmp10
    version: 2:6.2.1+dfsg-3
    architecture: amd64
   -
    package: libglib2.0-0
    version: 2.72.0-1+b1
    architecture: amd64
   -
    package: libgit2-dev
    version: 1.1.0+dfsg.1-4.1+b1
    architecture: amd64
   -
    package: libgit2-1.1
    version: 1.1.0+dfsg.1-4.1+b1
    architecture: amd64
   -
    package: libgdbm6
    version: 1.23-1
    architecture: amd64
   -
    package: libgdbm-compat4
    version: 1.23-1
    architecture: amd64
   -
    package: libgcc-s1
    version: 12-20220319-1
    architecture: amd64
   -
    package: libgcc-11-dev
    version: 11.2.0-19
    architecture: amd64
   -
    package: libfile-stripnondeterminism-perl
    version: 1.13.0-1
    architecture: all
   -
    package: libffi8
    version: 3.4.2-4
    architecture: amd64
   -
    package: libfakeroot
    version: 1.28-1
    architecture: amd64
   -
    package: libexpat1
    version: 2.4.8-1
    architecture: amd64
   -
    package: liberror-perl
    version: 0.17029-1
    architecture: all
   -
    package: libelogind0
    version: 246.9.1-1+debian1
    architecture: amd64
   -
    package: libelf1
    version: 0.186-1
    architecture: amd64
   -
    package: libedit2
    version: 3.1-20210910-1
    architecture: amd64
   -
    package: libdpkg-perl
    version: 1.21.7
    architecture: all
   -
    package: libdebhelper-perl
    version: 13.6
    architecture: all
   -
    package: libdebconfclient0
    version: 0.261
    architecture: amd64
   -
    package: libdb5.3
    version: 5.3.28+dfsg1-0.8
    architecture: amd64
   -
    package: libcurl4-gnutls-dev
    version: 7.82.0-2
    architecture: amd64
   -
    package: libcurl4
    version: 7.82.0-2
    architecture: amd64
   -
    package: libcurl3-gnutls
    version: 7.82.0-2
    architecture: amd64
   -
    package: libctf0
    version: 2.38-3
    architecture: amd64
   -
    package: libctf-nobfd0
    version: 2.38-3
    architecture: amd64
   -
    package: libcrypt1
    version: 1:4.4.27-1.1
    architecture: amd64
   -
    package: libcrypt-dev
    version: 1:4.4.27-1.1
    architecture: amd64
   -
    package: libcom-err2
    version: 1.46.5-2
    architecture: amd64
   -
    package: libcc1-0
    version: 12-20220319-1
    architecture: amd64
   -
    package: libcap2
    version: 1:2.44-1
    architecture: amd64
   -
    package: libcap-ng0
    version: 0.7.9-2.2+b2
    architecture: amd64
   -
    package: libc6-dev
    version: 2.33-7
    architecture: amd64
   -
    package: libc6
    version: 2.33-7
    architecture: amd64
   -
    package: libc-dev-bin
    version: 2.33-7
    architecture: amd64
   -
    package: libc-bin
    version: 2.33-7
    architecture: amd64
    essential: true
   -
    package: libbz2-1.0
    version: 1.0.8-5
    architecture: amd64
   -
    package: libbsd0
    version: 0.11.6-1
    architecture: amd64
   -
    package: libbrotli1
    version: 1.0.9-2+b3
    architecture: amd64
   -
    package: libblkid1
    version: 2.37.3-1+b1
    architecture: amd64
   -
    package: libbinutils
    version: 2.38-3
    architecture: amd64
   -
    package: libaudit1
    version: 1:3.0.7-1+b1
    architecture: amd64
   -
    package: libaudit-common
    version: 1:3.0.7-1
    architecture: all
   -
    package: libattr1
    version: 1:2.5.1-1
    architecture: amd64
   -
    package: libatomic1
    version: 12-20220319-1
    architecture: amd64
   -
    package: libasan6
    version: 11.2.0-19
    architecture: amd64
   -
    package: libarchive13
    version: 3.6.0-1
    architecture: amd64
   -
    package: libarchive-zip-perl
    version: 1.68-1
    architecture: all
   -
    package: libacl1
    version: 2.3.1-1
    architecture: amd64
   -
    package: intltool-debian
    version: 0.35.0+20060710.5
    architecture: all
   -
    package: init-system-helpers
    version: 1.62
    architecture: all
    essential: true
   -
    package: hostname
    version: 3.23
    architecture: amd64
    essential: true
   -
    package: gzip
    version: 1.10-4
    architecture: amd64
    essential: true
   -
    package: groff-base
    version: 1.22.4-8
    architecture: amd64
   -
    package: grep
    version: 3.7-1
    architecture: amd64
    essential: true
   -
    package: git-man
    version: 1:2.35.1+next.20220211-1
    architecture: all
   -
    package: git
    version: 1:2.35.1+next.20220211-1
    architecture: amd64
   -
    package: gettext-base
    version: 0.21-6
    architecture: amd64
   -
    package: gettext
    version: 0.21-6
    architecture: amd64
   -
    package: gcc-12-base
    version: 12-20220319-1
    architecture: amd64
   -
    package: gcc-11-base
    version: 11.2.0-19
    architecture: amd64
   -
    package: gcc-11
    version: 11.2.0-19
    architecture: amd64
   -
    package: gcc
    version: 4:11.2.0-2
    architecture: amd64
   -
    package: g++-11
    version: 11.2.0-19
    architecture: amd64
   -
    package: g++
    version: 4:11.2.0-2
    architecture: amd64
   -
    package: findutils
    version: 4.9.0-2
    architecture: amd64
    essential: true
   -
    package: file
    version: 1:5.41-3
    architecture: amd64
   -
    package: fakeroot
    version: 1.28-1
    architecture: amd64
   -
    package: emacsen-common
    version: 3.0.4
    architecture: all
   -
    package: dwz
    version: 0.14-1
    architecture: amd64
   -
    package: dpkg-dev
    version: 1.21.7
    architecture: all
   -
    package: dpkg
    version: 1.21.7
    architecture: amd64
    essential: true
   -
    package: diffutils
    version: 1:3.7-5
    architecture: amd64
    essential: true
   -
    package: dh-strip-nondeterminism
    version: 1.13.0-1
    architecture: all
   -
    package: dh-elpa-helper
    version: 2.0.10
    architecture: all
   -
    package: dh-autoreconf
    version: 20
    architecture: all
   -
    package: debianutils
    version: 5.7-0.1
    architecture: amd64
    essential: true
   -
    package: debhelper
    version: 13.6
    architecture: all
   -
    package: debconf
    version: 1.5.79
    architecture: all
   -
    package: dash
    version: 0.5.11+git20210903+057cd650a4ed-8
    architecture: amd64
    essential: true
   -
    package: cpp-11
    version: 11.2.0-19
    architecture: amd64
   -
    package: cpp
    version: 4:11.2.0-2
    architecture: amd64
   -
    package: coreutils
    version: 8.32-4.1
    architecture: amd64
    essential: true
   -
    package: cmake-data
    version: 3.23.0-1
    architecture: all
   -
    package: cmake
    version: 3.23.0-1
    architecture: amd64
   -
    package: cargo
    version: 0.57.0-5
    architecture: amd64
   -
    package: bzip2
    version: 1.0.8-5
    architecture: amd64
   -
    package: build-essential
    version: 12.9
    architecture: amd64
   -
    package: bsdutils
    version: 1:2.37.3-1+b1
    architecture: amd64
    essential: true
   -
    package: bsdextrautils
    version: 2.38~rc1-1
    architecture: amd64
   -
    package: binutils-x86-64-linux-gnu
    version: 2.38-3
    architecture: amd64
   -
    package: binutils-common
    version: 2.38-3
    architecture: amd64
   -
    package: binutils
    version: 2.38-3
    architecture: amd64
   -
    package: bash-completion
    version: 1:2.11-6
    architecture: all
   -
    package: bash
    version: 5.1-6
    architecture: amd64
    essential: true
   -
    package: base-passwd
    version: 3.5.52
    architecture: amd64
    essential: true
   -
    package: base-files
    version: 12.2
    architecture: amd64
    essential: true
   -
    package: autotools-dev
    version: 20220109.1
    architecture: all
   -
    package: autopoint
    version: 0.21-6
    architecture: all
   -
    package: automake
    version: 1:1.16.5-1.3
    architecture: all
   -
    package: autoconf
    version: 2.71-2
    architecture: all
 
background-packages: 68891
foreground-packages: 1
total-packages: 68892
broken-packages: 0

+------------------------------------------------------------------------------+
| Cleanup                                                                      |
+------------------------------------------------------------------------------+

Purging /<<BUILDDIR>>
Not cleaning session: cloned chroot in use
E: Package build dependencies not satisfied; skipping

+------------------------------------------------------------------------------+
| Summary                                                                      |
+------------------------------------------------------------------------------+

Build Architecture: amd64
Build Type: full
Build-Space: n/a
Build-Time: 0
Distribution: unstable
Fail-Stage: install-deps
Host Architecture: amd64
Install-Time: 0
Job: /tmp/tmp.MR9vCPd3S5/cargo_0.57.0-5.dsc
Machine Architecture: amd64
Package: cargo
Package-Time: 0
Source-Version: 0.57.0-5
Space: n/a
Status: given-back
Version: 0.57.0-5
--------------------------------------------------------------------------------
Finished at 2022-04-05T14:05:36Z
Build needed 00:00:00, no disk space


More information about the Pkg-rust-maintainers mailing list