[Pkg-samba-maint] r1368 - in branches/samba4: . debian
Jelmer Vernooij
ctrlsoft-guest at alioth.debian.org
Wed May 9 13:08:48 UTC 2007
Author: ctrlsoft-guest
Date: 2007-05-09 13:08:47 +0000 (Wed, 09 May 2007)
New Revision: 1368
Added:
branches/samba4/debian/
branches/samba4/debian/README.Debian
branches/samba4/debian/README.building
branches/samba4/debian/changelog
branches/samba4/debian/compat
branches/samba4/debian/control
branches/samba4/debian/copyright
branches/samba4/debian/dirs
branches/samba4/debian/diversions
branches/samba4/debian/gdbcommands
branches/samba4/debian/ldb-tools.install
branches/samba4/debian/libgensec-dev.install
branches/samba4/debian/libgensec0.install
branches/samba4/debian/libgensec0.postinst
branches/samba4/debian/libgtksamba-dev.install
branches/samba4/debian/libgtksamba0.install
branches/samba4/debian/libgtksamba0.postinst
branches/samba4/debian/libldb-dev.install
branches/samba4/debian/libldb0.install
branches/samba4/debian/libldb0.postinst
branches/samba4/debian/libparse-pidl-perl.install
branches/samba4/debian/libsamba-dev.install
branches/samba4/debian/libsamba0.install
branches/samba4/debian/libsamba0.postinst
branches/samba4/debian/libtalloc-dev.install
branches/samba4/debian/libtalloc0.install
branches/samba4/debian/libtalloc0.postinst
branches/samba4/debian/libtdb-dev.install
branches/samba4/debian/libtdb0.install
branches/samba4/debian/libtdb0.postinst
branches/samba4/debian/panic-action
branches/samba4/debian/po/
branches/samba4/debian/provision.smb.conf.patch
branches/samba4/debian/rules
branches/samba4/debian/samba-clients.install
branches/samba4/debian/samba-common.config
branches/samba4/debian/samba-common.dirs
branches/samba4/debian/samba-common.files
branches/samba4/debian/samba-common.install
branches/samba4/debian/samba-common.postinst
branches/samba4/debian/samba-common.postrm
branches/samba4/debian/samba-common.templates
branches/samba4/debian/samba-dev.install
branches/samba4/debian/samba-gtk-frontends.install
branches/samba4/debian/samba-testsuite.install
branches/samba4/debian/samba.config
branches/samba4/debian/samba.dirs
branches/samba4/debian/samba.init
branches/samba4/debian/samba.install
branches/samba4/debian/samba.postinst
branches/samba4/debian/samba.postrm
branches/samba4/debian/samba.templates
branches/samba4/debian/swat.install
branches/samba4/debian/winregistry-tools.install
Removed:
branches/samba4/README.Debian
branches/samba4/README.building
branches/samba4/changelog
branches/samba4/compat
branches/samba4/control
branches/samba4/copyright
branches/samba4/dirs
branches/samba4/diversions
branches/samba4/gdbcommands
branches/samba4/ldb-tools.install
branches/samba4/libgensec-dev.install
branches/samba4/libgensec0.install
branches/samba4/libgensec0.postinst
branches/samba4/libgtksamba-dev.install
branches/samba4/libgtksamba0.install
branches/samba4/libgtksamba0.postinst
branches/samba4/libldb-dev.install
branches/samba4/libldb0.install
branches/samba4/libldb0.postinst
branches/samba4/libparse-pidl-perl.install
branches/samba4/libsamba-dev.install
branches/samba4/libsamba0.install
branches/samba4/libsamba0.postinst
branches/samba4/libtalloc-dev.install
branches/samba4/libtalloc0.install
branches/samba4/libtalloc0.postinst
branches/samba4/libtdb-dev.install
branches/samba4/libtdb0.install
branches/samba4/libtdb0.postinst
branches/samba4/panic-action
branches/samba4/po/
branches/samba4/provision.smb.conf.patch
branches/samba4/rules
branches/samba4/samba-clients.install
branches/samba4/samba-common.config
branches/samba4/samba-common.dirs
branches/samba4/samba-common.files
branches/samba4/samba-common.install
branches/samba4/samba-common.postinst
branches/samba4/samba-common.postrm
branches/samba4/samba-common.templates
branches/samba4/samba-dev.install
branches/samba4/samba-gtk-frontends.install
branches/samba4/samba-testsuite.install
branches/samba4/samba.config
branches/samba4/samba.dirs
branches/samba4/samba.init
branches/samba4/samba.install
branches/samba4/samba.postinst
branches/samba4/samba.postrm
branches/samba4/samba.templates
branches/samba4/swat.install
branches/samba4/winregistry-tools.install
Log:
Move all files to debian directory, for use with svn-buildpackage.
Deleted: branches/samba4/README.Debian
===================================================================
--- branches/samba4/README.Debian 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/README.Debian 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,24 +0,0 @@
-Samba 4 for Debian
-------------------
-
-Note that the current packages, as well as Samba 4, are _highly experimental_
-and definitely not finished yet. You do not want to use these in a production
-environment unless you're unusually brave, stupid or both.
-
-Administrator password
-----------------------
-
-If you let the Debian packages set up your Samba 4 domain for you, they will
-be set up by default with a random administrator password. If you want to
-change this, you'll need ldbedit from the ldb-tools package. Run
-
- ldbedit -H /etc/samba/sam.ldb cn=administrator
-
-Somewhere in the LDIF, add a new line like this:
-
- sambaPassword: PASSWORD
-
-where PASSWORD is the new administrator password. Save and quit, and the
-password is changed for you.
-
- -- Steinar H. Gunderson <sesse at debian.org>, Wed, 04 Jan 2006 02:07:52 +0100
Deleted: branches/samba4/README.building
===================================================================
--- branches/samba4/README.building 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/README.building 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,56 +0,0 @@
-Building the experimental Debian package for Samba 4.0
-======================================================
-
- By Jelmer Vernooij, 20 May 2004.
- Rewritten by Steinar H. Gunderson, 4 January 2006.
-
-1. If you want to use the upstream packaging
-============================================
-
-The upstream Samba 4 repository (see http://devel.samba.org/)
-contains a directory called packaging/debian/ which contains the
-framework for building Debian packages. This directory is synced
-with the official Debian packaging (see below) now and then, but
-might be outdated at any given time. It is, however, easier to use
-(due to svn-buildpackage oddities) than the official packaging.
-Go to packaging/, and run:
-
- svn-buildpackage -rfakeroot
-
-2. If you want to use the official Debian packaging
-===================================================
-
-Unfortunately, this is somewhat more involved than using the
-upstream packaging. If anybody knows a better way of doing this,
-feel free to contact me (sesse at debian.org) :-)
-
-You should be able to cut-and-paste the entire tutorial into
-your shell in one go if you want it done automatically.
-
-: First check out the Samba 4 tree as usual:
-
- svn co svn://svnanon.samba.org/samba/branches/SAMBA_4_0 samba4
-
-: Then, check out the official Debian packaging:
-
- svn co svn://svn.debian.org/pkg-samba/branches/samba4 samba4/debian
-
-: Samba is not a native Debian package, so you will need to create
-: an .orig.tar.gz tarball. Do something along the lines of:
-
- VER=$( dpkg-parsechangelog -lsamba4/debian/changelog | sed -n 's/^Version: \(.*:\|\)//p' | sed 's/-[0-9.]\+$//' )
- svn export samba4 samba-$VER
- ( cd samba-$VER/source && ./autogen.sh )
- ( cd samba-$VER/source && ./script/mkversion.sh VERSION include/version.h ../../samba4/source/ )
- tar zcf samba_$VER.orig.tar.gz samba-$VER
-
-: With the .orig.tar.gz in place, you can now also export the debian/
-: directory:
-
- svn export samba4/debian samba-$VER/debian
-
-: Finally, build the package using whatever method you prefer:
-
- cd samba-$VER
- debuild
-
Deleted: branches/samba4/changelog
===================================================================
--- branches/samba4/changelog 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/changelog 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,209 +0,0 @@
-samba (4.0.0~~svn19515-1) UNRELEASED; urgency=low
-
- * New upstream versions (svn snapshots of r19515).
-
- -- Jelmer Vernooij <jelmer at samba.org> Mon, 30 Oct 2006 16:45:36 +0100
-
-samba (3.9.1+4.0.0tp2-1) UNRELEASED; urgency=low
-
- * New upstream version (tech preview 2).
-
- [ Jelmer Vernooij ]
- * Remove setntacl utility (it doesn't do anything).
- * Include oLschema2ldif.1 in the ldb-tools package.
- * Enable shared library building.
- * Put ldb, tdb, gtksamba, talloc and gensec libraries into seperate binary packages.
- * Pass fewer options for paths to configure
- * Adapt to new paths from upstream
-
- -- Jelmer Vernooij <jelmer at samba.org> Thu, 23 Mar 2006 01:13:32 +0100
-
-samba (3.9.1+4.0.0tp1-1) experimental; urgency=low
-
- * New upstream version (tech preview 1).
-
- [ Steinar H. Gunderson ]
- * Forward-port panic-action script from the Samba 3 packaging.
- * Patch the smb.conf provisioning template (only used by swat in the
- Debian packaging) to use the panic-action script by default.
- * Patch the samba-common postinst to generate smb.conf files with the
- same setting.
- * Include ntlm_auth.1 and smbd.8 man pages in the samba package.
- * Make the samba dependency on samba-common versioned.
- * Install /usr/bin/setntacl manually; the upstream install target doesn't
- seem to do it anymore.
- * Ask for the realm (and give it to the upgrade script) when upgrading from
- Samba 3; it can't be easily autodetected. (Note that upgrade still seems
- to be broken for now.)
-
- [ Jelmer Vernooij ]
- * Remove gwsam utility.
- * Include gwcrontab.1 and gepdump.1 man pages in the samba-gtk-frontends
- package.
- * Remove ldbtest utility from ldb-tools package.
-
- -- Steinar H. Gunderson <sesse at debian.org> Tue, 24 Jan 2006 16:01:59 +0100
-
-samba (3.9.0+SVN12946-1) experimental; urgency=low
-
- * New upstream version.
- * Fix upgrades from Samba 3 giving too few parameters to provision().
- (Closes: #348079)
- * Add sections to binary packages to match the archive:
- * libparse-pidl-perl: perl
- * samba-dev: devel
- * samba-gtk-frontends: x11
- * Adjust our export procedure we get the Subversion revision number in
- include/version.h (and thus in the build itself), and document how in
- README.building.
- * Remove "reload" option from the init script, since Samba 4 doesn't
- understand SIGHUP yet.
-
- -- Steinar H. Gunderson <sesse at debian.org> Sun, 15 Jan 2006 13:43:43 +0100
-
-samba (3.9.0+SVN12856-1) experimental; urgency=low
-
- * New upstream version.
- * Move testparm from samba into samba-common.
- * Make samba-common Architecture: any.
- * Make samba-common replace/conflict samba (<= 3.9.0+SVN12739-1).
- * Make samba-clients depend on samba-common.
- * Make samba-common depend on debconf.
- * Replace debconf dependencies with ${misc:Depends}, to automatically
- get the debconf-2.0 alternative right.
- * Include the newuser binary in samba-server package.
- * Add missing Build-Depends on: libgnutls-dev, libreadline5-dev,
- libpam0g-dev. All were causing silent build failures (ie. the package
- was simply built without the features).
- * Remove Build-Depends on libldap-dev.
- * Include NEWS file.
-
- -- Steinar H. Gunderson <sesse at debian.org> Wed, 11 Jan 2006 22:08:32 +0100
-
-samba (3.9.0+SVN12739-1) experimental; urgency=low
-
- * Move /usr/lib/samba/setup from samba-common to samba.
- * Make samba replace samba-common (<= 3.9.0+SVN12726-1)
- * Add a missing db_stop in samba.postinst, probably causing problems
- starting the daemon in some cases.
- * Add orphan files from /usr/bin (and relevant manpages) into their
- correct packages:
- * ldb-tools: ldbrename, ldbtest, oLschema2ldif.
- * samba: ntlm_auth.
- * samba-clients: getntacl.
- * samba-gtk-frontends: gwcrontab.
- * winregistry-tools: winreg.
- * samba3dump and tdbtorture remain orphans.
- * Add new executable /usr/bin/testparm to samba package.
- * Add /var/lib/samba directory to samba package; it's needed by
- testparm.
- * Rewrite configuration/bootstrapping to be able to install the client
- only and still get a usable smb.conf. The basic idea is:
- * samba-common looks for an smb.conf. If there is none, it asks for
- realm and domain and generates a skeleton smb.conf.
- * If samba notices an upgrade from Samba 3, it asks whether the user
- wants to upgrade. If not, it leaves everything alone (and broken).
- * Otherwise, samba asks whether the user wants to set up a PDC. If yes,
- it adds "server role = pdc" to smb.conf and provisions the server.
- * Removed unused file samba.conffiles.
- * Run dh_installdebconf on architecture-independent packages as well, now
- that samba-common has a config script.
- * Let samba-clients conflict/replace samba-common (<< 3.9.0), as they share
- /usr/bin/net.
-
- -- Steinar H. Gunderson <sesse at debian.org> Fri, 6 Jan 2006 14:25:50 +0100
-
-samba (3.9.0+SVN12726-1) experimental; urgency=low
-
- * First upload to Debian main.
-
- * Package renaming to get more in line with Samba 3 packaging:
- * Rename samba-server package to just samba, for consistency with the
- Samba 3 packaging.
- * Rename samba.samba.init to samba.init, now that the init script and the
- server package are called the same.
- * Rename samba-swat to swat, and add a dependency from swat to samba.
-
- * debian/rules changes:
- * Change SOURCEPATH to reflect that we now have the packaging in debian/,
- not packaging/debian/. This will have to be reverted whenever upstream
- syncs with us.
- * Removed debmake comment, it's hardly relevant any more.
- * Removed comment that there aren't any architecture-independent packages
- (because there are).
- * Remove redundant "package=samba" variable.
- * Do "make pch ; make all" instead of "make proto ; -make pch ; make all";
- some build system bug prevents us from just doing "make pch all", but
- since we're more or less guaranteed a recent gcc version, the pch target
- shouldn't fail, so we won't allow it to.
- * Remove autogen.sh call from configure; it should be done in the
- upstream tarball, not in maintainer scripts.
-
- * debian/control changes:
- * Copied Uploaders: line from Samba 3 packaging, adding myself.
- * Rename samba-client package to samba-clients.
- * Make samba-clients Replaces/Conflicts smbclient.
- * Build-depend on docbook-xml, not just docbook-xsl -- the documentation
- needs data from both to build.
- * Move the samba binary package to the top, so it's the one receiving
- the README.* files, among others.
-
- * Maintainer script changes:
- * Attempt to upgrade from Samba 3 if that's what the user tries to do.
- * Copy upgrade script into /usr/lib/samba/setup.
- * Check for upgrade from << 3.9.0 in config, and ask the user for upgrade
- if relevant.
- * Check for upgrade from << 3.9.0 in postinst, and upgrade if the user
- wished to.
- * Only provision in samba.postinst if we're doing a fresh install.
- * Support purging properly in postrm, both for samba and samba-common
- (adapted from the Samba 3 packaging).
- * Don't ask about an administrator password -- just let the provisioning
- scripts make up a random one.
- * Updated README.Debian to show the user how to change the password.
- * Make samba recommend ldb-tools.
- * Install README.building along with all the other documentation.
- * Don't try to ask about the "done" question, which we nuked in a previous
- release.
-
- * Updated debian/copyright.
- * Added Samba copyright holders.
- * Noted that talloc, ldb and tdb are under the LGPL.
- * Added copyright holders and licensing for the packaging itself.
-
- * Remove a few unused files in the packaging.
- * Change debhelper compatibility level to 5.
- * Update versioned depends accordingly.
- * Don't give --pidfile to start-stop-daemon when stopping -- current
- versions of Samba 4 won't die when the parent is killed.
- * Updated README.debian somewhat, and renamed to use a capital D.
- * Rewritten README.building, to reflect the magic that has to be done
- with the package in another repository.
- * Update po/POTFILES.in to reflect name change (from samba4-server ->
- samba-server -> samba).
-
- -- Steinar H. Gunderson <sesse at debian.org> Thu, 5 Jan 2006 21:27:13 +0100
-
-samba (3.9.0+SVN12395-1) unstable; urgency=low
-
- * New snapshot, drop 4 suffix
-
- -- Jelmer Vernooij <jelmer at samba.org> Tue, 20 Dec 2005 13:38:26 +0100
-
-samba4 (3.9.0+SVN12312-1) unstable; urgency=low
-
- * New upstream snapshot.
-
- -- Jelmer Vernooij <jelmer at samba.org> Mon, 27 Jun 2005 11:25:57 +0200
-
-samba4 (3.9.0-SVN-build-6710-1) unstable; urgency=low
-
- * Newer upstream version
-
- -- Jelmer Vernooij <jelmer at samba.org> Thu, 12 May 2005 14:04:05 +0200
-
-samba4 (3.9.0-SVN-build-655-1) unstable; urgency=low
-
- * Initial release.
-
- -- Jelmer Vernooij <jelmer at samba.org> Thu, 13 May 2004 01:38:41 +0200
Deleted: branches/samba4/compat
===================================================================
--- branches/samba4/compat 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/compat 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1 +0,0 @@
-5
Deleted: branches/samba4/control
===================================================================
--- branches/samba4/control 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/control 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,296 +0,0 @@
-Source: samba
-Section: net
-Priority: optional
-Maintainer: Jelmer Vernooij <jelmer at samba.org>
-Uploaders: Steve Langasek <vorlon at debian.org>, Christian Perrier <bubulle at debian.org>, Noèl Köthe <noel at debian.org>, Steinar H. Gunderson <sesse at debian.org>
-Standards-Version: 3.6.2
-Build-Depends: libgtk2.0-dev, libgconf2-dev, debhelper (>> 5.0.0), libparse-yapp-perl, perl, docbook-xsl, docbook-xml, xsltproc, po-debconf, libgnutls-dev, libreadline5-dev, libpam0g-dev, libblkid-dev, libattr1-dev, flex, bison
-
-Package: samba
-Architecture: any
-Recommends: swat, ldb-tools
-Depends: ${shlibs:Depends}, ${misc:Depends}, samba-common (=${Source-Version})
-Replaces: samba-common (<= 3.9.0+SVN12726-1)
-Description: LanManager-like file and printer server for Unix (version 4)
- The Samba software suite is a collection of programs that
- implements the SMB protocol for unix systems, allowing you to serve
- files and printers to Windows, NT, OS/2 and DOS clients, as well as
- run as a domain controller for Active Directory.
- .
- These packages contain snapshot versions of Samba 4, the next-generation
- version of Samba. These should be considered _experimental_, and should
- not be used in production. In particular, no guarantees are made with
- regard to upgrades between versions.
- .
- This package contains smbd, the Samba file, print and domain server.
-
-Package: samba-common
-Architecture: any
-Replaces: samba (<= 3.9.0+SVN12739-1)
-Conflicts: samba (<= 3.9.0+SVN12739-1)
-Depends: ${misc:Depends}
-Description: Samba 4 common files used by both the server and the client
- The Samba software suite is a collection of programs that
- implements the SMB protocol for unix systems, allowing you to serve
- files and printers to Windows, NT, OS/2 and DOS clients. This protocol
- is sometimes also referred to as the LanManager or NetBIOS protocol.
- .
- These packages contain snapshot versions of Samba 4, the next-generation
- version of Samba. These should be considered _experimental_, and should
- not be used in production. In particular, no guarantees are made with
- regard to upgrades between versions.
- .
- This package contains the common files that are used by both the server
- (provided in the samba package) and the client (provided in the samba-clients
- package).
-
-Package: samba-clients
-Architecture: any
-Depends: ${shlibs:Depends}, samba-common (=${Source-Version})
-Replaces: smbclient, samba-common (<< 3.9.0)
-Conflicts: smbclient, samba-common (<< 3.9.0)
-Description: client utilities from Samba 4
- The Samba software suite is a collection of programs that
- implements the SMB protocol for unix systems, allowing you to serve
- files and printers to Windows, NT, OS/2 and DOS clients. This protocol
- is sometimes also referred to as the LanManager or NetBIOS protocol.
- .
- These packages contain snapshot versions of Samba 4, the next-generation
- version of Samba. These should be considered _experimental_, and should
- not be used in production. In particular, no guarantees are made with
- regard to upgrades between versions.
- .
- This package contains some client components of the Samba suite. In
- particular it includes the command line utilities smbclient, net,
- and some ACL tools.
-
-Package: samba-testsuite
-Architecture: any
-Depends: ${shlibs:Depends}, samba-common
-Description: test suite from Samba 4
- The Samba software suite is a collection of programs that
- implements the SMB protocol for unix systems, allowing you to serve
- files and printers to Windows, NT, OS/2 and DOS clients, as well as
- run as a domain controller for Active Directory.
- .
- These packages contain snapshot versions of Samba 4, the next-generation
- version of Samba. These should be considered _experimental_, and should
- not be used in production. In particular, no guarantees are made with
- regard to upgrades between versions.
- .
- This package contains programs for testing the reliability and speed
- of SMB servers, Samba in particular.
-
-Package: samba-gtk-frontends
-Architecture: any
-Depends: ${shlibs:Depends}
-Section: x11
-Description: graphical Samba client utilities
- The Samba software suite is a collection of programs that
- implements the SMB protocol for unix systems, allowing you to serve
- files and printers to Windows, NT, OS/2 and DOS clients, as well as
- run as a domain controller for Active Directory.
- .
- These packages contain snapshot versions of Samba 4, the next-generation
- version of Samba. These should be considered _experimental_, and should
- not be used in production. In particular, no guarantees are made with
- regard to upgrades between versions.
- .
- This package contains GTK+ programs for maintaining:
- .
- * Remote SAM databases
- * Local and remote registries
- * DCE/RPC endpoints
-
-Package: winregistry-tools
-Architecture: any
-Depends: ${shlibs:Depends}
-Description: tools for viewing and manipulating the Windows registry
- The Samba software suite is a collection of programs that
- implements the SMB protocol for unix systems, allowing you to serve
- files and printers to Windows, NT, OS/2 and DOS clients, as well as
- run as a domain controller for Active Directory.
- .
- These packages contain snapshot versions of Samba 4, the next-generation
- version of Samba. These should be considered _experimental_, and should
- not be used in production. In particular, no guarantees are made with
- regard to upgrades between versions.
- .
- This package contains tools for viewing and manipulating the binary
- "registry" found on Windows machines, both locally and remote.
-
-Package: libparse-pidl-perl
-Architecture: any
-Depends: ${perl:Depends}
-Section: perl
-Description: IDL compiler written in Perl
- The Samba software suite is a collection of programs that
- implements the SMB protocol for unix systems, allowing you to serve
- files and printers to Windows, NT, OS/2 and DOS clients, as well as
- run as a domain controller for Active Directory.
- .
- These packages contain snapshot versions of Samba 4, the next-generation
- version of Samba. These should be considered _experimental_, and should
- not be used in production. In particular, no guarantees are made with
- regard to upgrades between versions.
- .
- This package contains the IDL (Interface Description Language) compiler pidl,
- which takes in IDL files and can output C code for various uses. It is
- primarily of interest to developers.
-
-Package: samba-dev
-Architecture: any
-Depends: libparse-pidl-perl, libc6-dev, pkg-config (>= 0.14.0), libldb-dev, libtdb-dev, libtalloc-dev
-Section: devel
-Description: tools for extending Samba
- The Samba software suite is a collection of programs that
- implements the SMB protocol for unix systems, allowing you to serve
- files and printers to Windows, NT, OS/2 and DOS clients, as well as
- run as a domain controller for Active Directory.
- .
- These packages contain snapshot versions of Samba 4, the next-generation
- version of Samba. These should be considered _experimental_, and should
- not be used in production. In particular, no guarantees are made with
- regard to upgrades between versions.
- .
- This package contains include files and libraries for interfacing to
- and extending Samba. In particular, it contains development files for
- the talloc and ldb libraries.
-
-Package: ldb-tools
-Architecture: any
-Depends: ${shlibs:Depends}
-Description: tools for maintaining LDB database files
- The Samba software suite is a collection of programs that
- implements the SMB protocol for unix systems, allowing you to serve
- files and printers to Windows, NT, OS/2 and DOS clients, as well as
- run as a domain controller for Active Directory.
- .
- These packages contain snapshot versions of Samba 4, the next-generation
- version of Samba. These should be considered _experimental_, and should
- not be used in production. In particular, no guarantees are made with
- regard to upgrades between versions.
- .
- This package contains tools for maintaining, creating and editing
- LDB database files, which are central to Samba 4's operation. They
- are primarily useful for debugging and developing Samba or other
- applications using LDB.
-
-Package: swat
-Architecture: all
-Depends: samba (=${Source-Version})
-Description: data files for SWAT
- The Samba software suite is a collection of programs that
- implements the SMB protocol for unix systems, allowing you to serve
- files and printers to Windows, NT, OS/2 and DOS clients, as well as
- run as a domain controller for Active Directory.
- .
- These packages contain snapshot versions of Samba 4, the next-generation
- version of Samba. These should be considered _experimental_, and should
- not be used in production. In particular, no guarantees are made with
- regard to upgrades between versions.
- .
- This package contains the data files for SWAT, the Samba Web Administration
- Tool. These are used by the embedded Samba 4 web server to provide web-based
- administration of shares and other settings.
-
-Package: libldb0
-Architecture: any
-Depends: ${shlibs:Depends}
-Description: Light-Weight Database
- ldb is a LDAP-like embedded database. It provides a fast database with an
- LDAP-like API designed to be used within an application. In some ways it can
- be seen as a intermediate solution between key-value pair databases and a
- real LDAP database.
-
-Package: libldb-dev
-Architecture: all
-Depends: libldb0 (=${Source-Version}), libtdb-dev, libtalloc-dev
-Description: Light-Weight Database
- ldb is a LDAP-like embedded database. It provides a fast database with an
- LDAP-like API designed to be used within an application. In some ways it can
- be seen as a intermediate solution between key-value pair databases and a
- real LDAP database.
- .
- This package contains the files required for development.
-
-Package: libtalloc0
-Architecture: any
-Depends: ${shlibs:Depends}
-Description: Hierarchical memory allocator
- talloc is a hierarchical pool based memory allocator with destructors. It is
- the core memory allocator used in Samba4, and has made a huge difference in
- many aspects of Samba4 development.
-
-Package: libtalloc-dev
-Architecture: all
-Depends: libtalloc0 (=${Source-Version})
-Description: Hierarchical memory allocator
- talloc is a hierarchical pool based memory allocator with destructors. It is
- the core memory allocator used in Samba4, and has made a huge difference in
- many aspects of Samba4 development.
- .
- This package contains the files required for development.
-
-Package: libtdb0
-Architecture: any
-Depends: ${shlibs:Depends}
-Description: Trivial Database
- This is a simple database API. It is modelled after the structure
- of GDBM. TDB features, unlike GDBM, multiple writers support with
- appropriate locking.
-
-Package: libtdb-dev
-Architecture: all
-Depends: libtdb0 (=${Source-Version})
-Description: Trivial Database
- This is a simple database API. It is modelled after the structure
- of GDBM. TDB features, unlike GDBM, multiple writers support with
- appropriate locking.
- .
- This package contains the files required for development.
-
-Package: libgtksamba0
-Architecture: any
-Depends: ${shlibs:Depends}
-Description: Collection of Samba-related GTK+ widgets
- A collection of GTK+ widgets useful when creating Samba-related GUI
- applications.
-
-Package: libgtksamba-dev
-Architecture: all
-Depends: libgtksamba0 (=${Source-Version})
-Description: Collection of Samba-related GTK+ widgets
- A collection of GTK+ widgets useful when creating Samba-related GUI
- applications.
- .
- This package contains the files required for development.
-
-Package: libgensec-dev
-Architecture: all
-Depends: libgensec0 (=${Source-Version})
-Description: Generic Security Library
- FIXME
- .
- This package contains the files required for development.
-
-Package: libgensec0
-Architecture: any
-Depends: ${shlibs:Depends}
-Description: Generic Security Library
- FIXME
-
-Package: libsamba0
-Architecture: any
-Depends: ${shlibs:Depends}
-Description: Samba utility library
- FIXME
-
-Package: libsamba-dev
-Architecture: all
-Depends: libsamba0 (=${Source-Version})
-Description: Samba utility library
- FIXME
- .
- This package contains the files required for development.
-
Deleted: branches/samba4/copyright
===================================================================
--- branches/samba4/copyright 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/copyright 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,52 +0,0 @@
-This package was debianized by Jelmer Vernooij jelmer at samba.org on
-Thu, 13 May 2004 01:38:41 +0200.
-
-It was downloaded from ftp://ftp.samba.org/
-
-Copyright for Samba itself:
-
- Copyright Andrew Tridgell and the Samba Team 1992-2006
- Heimdal Copyright (c) 1997-2005 Kungliga Tekniska Högskolan
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; version 2 dated June, 1991.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-
-Copyright for talloc, ldb and tdb:
-
- Copyright Andrew Tridgell and the Samba Team 1992-2006
-
- This library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Lesser General Public
- License as published by the Free Software Foundation; either
- version 2 of the License, or (at your option) any later version.
-
- This library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Lesser General Public License for more details.
-
- You should have received a copy of the GNU Lesser General Public
- License along with this library; if not, write to the Free Software
- Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-
-Copyright for the Debian packaging:
-
- Copyright Jelmer Vernooij 2005
- Copyright Steinar H. Gunderson 2005-2006
-
- The Debian packaging is licensed under the GNU LGPL, version 2.1.
-
-On Debian GNU/Linux systems, the complete text of the GNU General
-Public License can be found in `/usr/share/common-licenses/GPL',
-and the complete text of the GNU Lesser General Public License can
-be found in `/usr/share/common-licenses/LGPL'.
Property changes on: branches/samba4/debian
___________________________________________________________________
Name: mergeWithUpstream
+ 1
Copied: branches/samba4/debian/README.Debian (from rev 1367, branches/samba4/README.Debian)
Copied: branches/samba4/debian/README.building (from rev 1367, branches/samba4/README.building)
Copied: branches/samba4/debian/changelog (from rev 1367, branches/samba4/changelog)
Copied: branches/samba4/debian/compat (from rev 1367, branches/samba4/compat)
Copied: branches/samba4/debian/control (from rev 1367, branches/samba4/control)
Copied: branches/samba4/debian/copyright (from rev 1367, branches/samba4/copyright)
Copied: branches/samba4/debian/dirs (from rev 1367, branches/samba4/dirs)
Copied: branches/samba4/debian/diversions (from rev 1367, branches/samba4/diversions)
Copied: branches/samba4/debian/gdbcommands (from rev 1367, branches/samba4/gdbcommands)
Copied: branches/samba4/debian/ldb-tools.install (from rev 1367, branches/samba4/ldb-tools.install)
Copied: branches/samba4/debian/libgensec-dev.install (from rev 1367, branches/samba4/libgensec-dev.install)
Copied: branches/samba4/debian/libgensec0.install (from rev 1367, branches/samba4/libgensec0.install)
Copied: branches/samba4/debian/libgensec0.postinst (from rev 1367, branches/samba4/libgensec0.postinst)
Copied: branches/samba4/debian/libgtksamba-dev.install (from rev 1367, branches/samba4/libgtksamba-dev.install)
Copied: branches/samba4/debian/libgtksamba0.install (from rev 1367, branches/samba4/libgtksamba0.install)
Copied: branches/samba4/debian/libgtksamba0.postinst (from rev 1367, branches/samba4/libgtksamba0.postinst)
Copied: branches/samba4/debian/libldb-dev.install (from rev 1367, branches/samba4/libldb-dev.install)
Copied: branches/samba4/debian/libldb0.install (from rev 1367, branches/samba4/libldb0.install)
Copied: branches/samba4/debian/libldb0.postinst (from rev 1367, branches/samba4/libldb0.postinst)
Copied: branches/samba4/debian/libparse-pidl-perl.install (from rev 1367, branches/samba4/libparse-pidl-perl.install)
Copied: branches/samba4/debian/libsamba-dev.install (from rev 1367, branches/samba4/libsamba-dev.install)
Copied: branches/samba4/debian/libsamba0.install (from rev 1367, branches/samba4/libsamba0.install)
Copied: branches/samba4/debian/libsamba0.postinst (from rev 1367, branches/samba4/libsamba0.postinst)
Copied: branches/samba4/debian/libtalloc-dev.install (from rev 1367, branches/samba4/libtalloc-dev.install)
Copied: branches/samba4/debian/libtalloc0.install (from rev 1367, branches/samba4/libtalloc0.install)
Copied: branches/samba4/debian/libtalloc0.postinst (from rev 1367, branches/samba4/libtalloc0.postinst)
Copied: branches/samba4/debian/libtdb-dev.install (from rev 1367, branches/samba4/libtdb-dev.install)
Copied: branches/samba4/debian/libtdb0.install (from rev 1367, branches/samba4/libtdb0.install)
Copied: branches/samba4/debian/libtdb0.postinst (from rev 1367, branches/samba4/libtdb0.postinst)
Copied: branches/samba4/debian/panic-action (from rev 1367, branches/samba4/panic-action)
Copied: branches/samba4/debian/po (from rev 1367, branches/samba4/po)
Copied: branches/samba4/debian/provision.smb.conf.patch (from rev 1367, branches/samba4/provision.smb.conf.patch)
Copied: branches/samba4/debian/rules (from rev 1367, branches/samba4/rules)
Copied: branches/samba4/debian/samba-clients.install (from rev 1367, branches/samba4/samba-clients.install)
Copied: branches/samba4/debian/samba-common.config (from rev 1367, branches/samba4/samba-common.config)
Copied: branches/samba4/debian/samba-common.dirs (from rev 1367, branches/samba4/samba-common.dirs)
Copied: branches/samba4/debian/samba-common.files (from rev 1367, branches/samba4/samba-common.files)
Copied: branches/samba4/debian/samba-common.install (from rev 1367, branches/samba4/samba-common.install)
Copied: branches/samba4/debian/samba-common.postinst (from rev 1367, branches/samba4/samba-common.postinst)
Copied: branches/samba4/debian/samba-common.postrm (from rev 1367, branches/samba4/samba-common.postrm)
Copied: branches/samba4/debian/samba-common.templates (from rev 1367, branches/samba4/samba-common.templates)
Copied: branches/samba4/debian/samba-dev.install (from rev 1367, branches/samba4/samba-dev.install)
Copied: branches/samba4/debian/samba-gtk-frontends.install (from rev 1367, branches/samba4/samba-gtk-frontends.install)
Copied: branches/samba4/debian/samba-testsuite.install (from rev 1367, branches/samba4/samba-testsuite.install)
Copied: branches/samba4/debian/samba.config (from rev 1367, branches/samba4/samba.config)
Copied: branches/samba4/debian/samba.dirs (from rev 1367, branches/samba4/samba.dirs)
Copied: branches/samba4/debian/samba.init (from rev 1367, branches/samba4/samba.init)
Copied: branches/samba4/debian/samba.install (from rev 1367, branches/samba4/samba.install)
Copied: branches/samba4/debian/samba.postinst (from rev 1367, branches/samba4/samba.postinst)
Copied: branches/samba4/debian/samba.postrm (from rev 1367, branches/samba4/samba.postrm)
Copied: branches/samba4/debian/samba.templates (from rev 1367, branches/samba4/samba.templates)
Copied: branches/samba4/debian/swat.install (from rev 1367, branches/samba4/swat.install)
Copied: branches/samba4/debian/winregistry-tools.install (from rev 1367, branches/samba4/winregistry-tools.install)
Deleted: branches/samba4/dirs
===================================================================
--- branches/samba4/dirs 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/dirs 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,4 +0,0 @@
-usr/bin
-usr/sbin
-usr/share/man/man1
-usr/share/man/man7
Deleted: branches/samba4/diversions
===================================================================
Deleted: branches/samba4/gdbcommands
===================================================================
--- branches/samba4/gdbcommands 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/gdbcommands 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,2 +0,0 @@
-bt
-quit
Deleted: branches/samba4/ldb-tools.install
===================================================================
--- branches/samba4/ldb-tools.install 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/ldb-tools.install 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,14 +0,0 @@
-usr/bin/ldbadd
-usr/bin/ldbdel
-usr/bin/ldbedit
-usr/bin/ldbmodify
-usr/bin/ldbrename
-usr/bin/ldbsearch
-usr/bin/oLschema2ldif
-usr/share/man/man1/ldbadd.1
-usr/share/man/man1/ldbdel.1
-usr/share/man/man1/ldbedit.1
-usr/share/man/man1/ldbmodify.1
-usr/share/man/man1/ldbrename.1
-usr/share/man/man1/ldbsearch.1
-usr/share/man/man1/oLschema2ldif.1
Deleted: branches/samba4/libgensec-dev.install
===================================================================
--- branches/samba4/libgensec-dev.install 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/libgensec-dev.install 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,5 +0,0 @@
-usr/lib/pkgconfig/gensec.pc
-usr/lib/libgensec.so
-usr/include/samba-4.0/gensec.h
-usr/include/samba-4.0/gensec/spnego.h
-usr/include/samba-4.0/gensec/proto.h
Deleted: branches/samba4/libgensec0.install
===================================================================
--- branches/samba4/libgensec0.install 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/libgensec0.install 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,2 +0,0 @@
-usr/lib/libgensec.so.0.*
-usr/lib/samba/gensec/*.so
Deleted: branches/samba4/libgensec0.postinst
===================================================================
--- branches/samba4/libgensec0.postinst 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/libgensec0.postinst 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,12 +0,0 @@
-#!/bin/sh
-#
-# postinst script for libgtksamba
-#
-# $Id$
-#
-
-if [ "$1" = "configure" ]; then
- ldconfig
-fi
-
-#DEBHELPER#
Deleted: branches/samba4/libgtksamba-dev.install
===================================================================
--- branches/samba4/libgtksamba-dev.install 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/libgtksamba-dev.install 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,4 +0,0 @@
-usr/include/samba-4.0/gtk-smb.h
-usr/include/samba-4.0/gtk/*.h
-usr/lib/pkgconfig/gtksamba.pc
-usr/lib/libgtksamba.so
Deleted: branches/samba4/libgtksamba0.install
===================================================================
--- branches/samba4/libgtksamba0.install 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/libgtksamba0.install 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1 +0,0 @@
-usr/lib/libgtksamba.so.0.*
Deleted: branches/samba4/libgtksamba0.postinst
===================================================================
--- branches/samba4/libgtksamba0.postinst 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/libgtksamba0.postinst 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,8 +0,0 @@
-#!/bin/sh
-#
-# postinst script for libgtksamba
-#
-# $Id$
-#
-
-#DEBHELPER#
Deleted: branches/samba4/libldb-dev.install
===================================================================
--- branches/samba4/libldb-dev.install 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/libldb-dev.install 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,5 +0,0 @@
-usr/include/samba-4.0/ldb.h
-usr/include/samba-4.0/ldb_errors.h
-usr/lib/pkgconfig/ldb.pc
-usr/lib/libldb.so
-usr/share/man/man3/ldb.3
Deleted: branches/samba4/libldb0.install
===================================================================
--- branches/samba4/libldb0.install 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/libldb0.install 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,21 +0,0 @@
-usr/lib/libldb.so.0.*
-usr/lib/samba/ldb/asq.so
-usr/lib/samba/ldb/extended_dn.so
-usr/lib/samba/ldb/kludge_acl.so
-usr/lib/samba/ldb/objectclass.so
-usr/lib/samba/ldb/objectguid.so
-usr/lib/samba/ldb/ildap.so
-usr/lib/samba/ldb/ldap.so
-usr/lib/samba/ldb/ldaps.so
-usr/lib/samba/ldb/ldapi.so
-usr/lib/samba/ldb/operational.so
-usr/lib/samba/ldb/paged_results.so
-usr/lib/samba/ldb/password_hash.so
-usr/lib/samba/ldb/rdn_name.so
-usr/lib/samba/ldb/rootdse.so
-usr/lib/samba/ldb/samldb.so
-usr/lib/samba/ldb/schema.so
-usr/lib/samba/ldb/server_sort.so
-usr/lib/samba/ldb/skel.so
-usr/lib/samba/ldb/tdb.so
-usr/lib/samba/ldb/wins_ldb.so
Deleted: branches/samba4/libldb0.postinst
===================================================================
--- branches/samba4/libldb0.postinst 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/libldb0.postinst 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,12 +0,0 @@
-#!/bin/sh
-#
-# postinst script for libldb0
-#
-# $Id$
-#
-
-if [ "$1" = "configure" ]; then
- ldconfig
-fi
-
-#DEBHELPER#
Deleted: branches/samba4/libparse-pidl-perl.install
===================================================================
--- branches/samba4/libparse-pidl-perl.install 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/libparse-pidl-perl.install 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,4 +0,0 @@
-usr/bin/pidl
-usr/share/perl5
-usr/share/man/man3/*.3pm
-usr/share/man/man1/pidl.1p
Deleted: branches/samba4/libsamba-dev.install
===================================================================
--- branches/samba4/libsamba-dev.install 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/libsamba-dev.install 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,186 +0,0 @@
-usr/include/samba-4.0/gen_ndr/samr.h
-usr/include/samba-4.0/gen_ndr/dcerpc.h
-usr/include/samba-4.0/gen_ndr/ndr_dcerpc.h
-usr/include/samba-4.0/gen_ndr/lsa.h
-usr/include/samba-4.0/gen_ndr/security.h
-usr/include/samba-4.0/gen_ndr/netlogon.h
-usr/include/samba-4.0/gen_ndr/misc.h
-usr/include/samba-4.0/gen_ndr/ndr_misc.h
-usr/include/samba-4.0/gen_ndr/nbt.h
-usr/include/samba-4.0/gen_ndr/nbt.h.old
-usr/include/samba-4.0/util.h
-usr/include/samba-4.0/util/byteorder.h
-usr/include/samba-4.0/util/debug.h
-usr/include/samba-4.0/util/mutex.h
-usr/include/samba-4.0/util/safe_string.h
-usr/include/samba-4.0/util/xfile.h
-usr/include/samba-4.0/util/proto.h
-usr/include/samba-4.0/dcerpc_server.h
-usr/include/samba-4.0/dcerpc_server/proto.h
-usr/include/samba-4.0/dcerpc_server/common.h
-usr/include/samba-4.0/dcerpc_server/common_proto.h
-usr/include/samba-4.0/tdr.h
-usr/include/samba-4.0/tdr/proto.h
-usr/include/samba-4.0/dcerpc.h
-usr/include/samba-4.0/dcerpc/proto.h
-usr/include/samba-4.0/credentials.h
-usr/include/samba-4.0/credentials
-usr/include/samba-4.0/credentials/proto.h
-usr/include/samba-4.0/auth.h
-usr/include/samba-4.0/auth/proto.h
-usr/include/samba-4.0/libnet.h
-usr/include/samba-4.0/libnet/join.h
-usr/include/samba-4.0/libnet/lookup.h
-usr/include/samba-4.0/libnet/passwd.h
-usr/include/samba-4.0/libnet/rpc.h
-usr/include/samba-4.0/libnet/share.h
-usr/include/samba-4.0/libnet/time.h
-usr/include/samba-4.0/libnet/user.h
-usr/include/samba-4.0/libnet/site.h
-usr/include/samba-4.0/libnet/vampire.h
-usr/include/samba-4.0/libnet/userinfo.h
-usr/include/samba-4.0/libnet/userman.h
-usr/include/samba-4.0/socket_wrapper.h
-usr/include/samba-4.0/torture.h
-usr/include/samba-4.0/torture/proto.h
-usr/include/samba-4.0/torture/util.h
-usr/include/samba-4.0/ldap.h
-usr/include/samba-4.0/ldap_proto.h
-usr/include/samba-4.0/charset.h
-usr/include/samba-4.0/charset/proto.h
-usr/include/samba-4.0/client.h
-usr/include/samba-4.0/ntvfs.h
-usr/include/samba-4.0/ndr.h
-usr/include/samba-4.0/ndr/proto.h
-usr/include/samba-4.0/client/proto.h
-usr/include/samba-4.0/domain_credentials.h
-usr/include/samba-4.0/registry.h
-usr/include/samba-4.0/core/nterr.h
-usr/include/samba-4.0/core/error.h
-usr/include/samba-4.0/core/error_proto.h
-usr/include/samba-4.0/core/doserr.h
-usr/include/samba-4.0/core/ntstatus.h
-usr/include/samba-4.0/param.h
-usr/include/samba-4.0/param/proto.h
-usr/include/samba-4.0/samba/popt.h
-usr/include/samba-4.0/samba/version.h
-usr/include/samba-4.0/samba/asn1.h
-usr/include/samba-4.0/samba/asn1/proto.h
-usr/include/samba-4.0/cldap.h
-usr/include/samba-4.0/samba3.h
-usr/include/samba-4.0/core.h
-usr/include/samba-4.0/samdb.h
-usr/include/samba-4.0/db_wrap.h
-usr/include/samba-4.0/samdb/proto.h
-usr/include/samba-4.0/db_wrap/proto.h
-usr/lib/pkgconfig/samba-util.pc
-usr/lib/pkgconfig/tdr.pc
-usr/lib/pkgconfig/dcerpc.pc
-usr/lib/pkgconfig/samba-net.pc
-usr/lib/pkgconfig/socket_wrapper.pc
-usr/lib/pkgconfig/cli_wrepl.pc
-usr/lib/pkgconfig/torture.pc
-usr/lib/pkgconfig/winbind-client.pc
-usr/lib/pkgconfig/ntvfs.pc
-usr/lib/pkgconfig/ndr.pc
-usr/lib/pkgconfig/registry.pc
-usr/lib/pkgconfig/samba-config.pc
-usr/lib/pkgconfig/ndr_compression.pc
-usr/lib/pkgconfig/cli_cldap.pc
-usr/lib/pkgconfig/samba3.pc
-usr/lib/libsamba-config.so
-usr/lib/libndr_compression.so
-usr/lib/librpc_ndr_policyagent.so
-usr/lib/libndr_efs.so
-usr/lib/libndr_winsrepl.so
-usr/lib/libndr_scerpc.so
-usr/lib/libcli_cldap.so
-usr/lib/libndr_wins.so
-usr/lib/libndr_irpc.so
-usr/lib/libndr_dsbackup.so
-usr/lib/libsamba3.so
-usr/lib/librpc_ndr_wkssvc.so
-usr/lib/librpc_ndr_svcctl.so
-usr/lib/librpc_ndr_scerpc.so
-usr/lib/librpc_ndr_spoolss.so
-usr/lib/librpc_ndr_samr.so
-usr/lib/libtorture.so
-usr/lib/libcli_wrepl.so
-usr/lib/libndr_mgmt.so
-usr/lib/libndr_spoolss.so
-usr/lib/libheimdal.so
-usr/lib/libsocket_wrapper.so
-usr/lib/libsamba-net.so
-usr/lib/librpc_ndr_dbgidl.so
-usr/lib/libndr_srvsvc.so
-usr/lib/libdcerpc.so
-usr/lib/libndr_eventlog.so
-usr/lib/libndr_dssetup.so
-usr/lib/libndr_oxidresolver.so
-usr/lib/libtdr.so
-usr/lib/librpc_ndr_drsuapi.so
-usr/lib/libndr_wkssvc.so
-usr/lib/librpc_ndr_keysvc.so
-usr/lib/librpc_ndr_oxidresolver.so
-usr/lib/libndr_dfs.so
-usr/lib/libndr_wzcsvc.so
-usr/lib/libsamba-util.so
-usr/lib/librpc_ndr_rot.so
-usr/lib/librpc_ndr_w32time.so
-usr/lib/librpc_ndr_eventlog.so
-usr/lib/librpc_ndr_ntsvcs.so
-usr/lib/libndr_table.so
-usr/lib/librpc_ndr_efs.so
-usr/lib/libndr_winstation.so
-usr/lib/libndr_samr.so
-usr/lib/librpc_ndr_wzcsvc.so
-usr/lib/librpc_ndr_srvsvc.so
-usr/lib/librpc_ndr_initshutdown.so
-usr/lib/libwinbind-client.so
-usr/lib/libndr_msgsvc.so
-usr/lib/libndr_remact.so
-usr/lib/libndr_lsa.so
-usr/lib/libsmbcalls.so
-usr/lib/libndr_dnsserver.so
-usr/lib/libndr_security.so
-usr/lib/libndr_unixinfo.so
-usr/lib/libndr_winreg.so
-usr/lib/librpc_ndr_atsvc.so
-usr/lib/librpc_ndr_netlogon.so
-usr/lib/librpc_ndr_trkwks.so
-usr/lib/libndr_atsvc.so
-usr/lib/libndr_dbgidl.so
-usr/lib/librpc_ndr_dfs.so
-usr/lib/libndr_trkwks.so
-usr/lib/libndr_browser.so
-usr/lib/libndr_audiosrv.so
-usr/lib/libndr_drsuapi.so
-usr/lib/libndr_keysvc.so
-usr/lib/libntvfs.so
-usr/lib/libndr_ntsvcs.so
-usr/lib/libndr_protected_storage.so
-usr/lib/librpc_ndr_msgsvc.so
-usr/lib/librpc_ndr_protected_storage.so
-usr/lib/libdynconfig.so
-usr/lib/libndr_netlogon.so
-usr/lib/librpc_ndr_unixinfo.so
-usr/lib/librpc_ndr_dsbackup.so
-usr/lib/libndr_xattr.so
-usr/lib/libndr.so
-usr/lib/libndr_epmapper.so
-usr/lib/librpc_ndr_epmapper.so
-usr/lib/librpc_ndr_remact.so
-usr/lib/librpc_ndr_winreg.so
-usr/lib/libndr_initshutdown.so
-usr/lib/libndr_drsblobs.so
-usr/lib/librpc_ndr_audiosrv.so
-usr/lib/librpc_ndr_dssetup.so
-usr/lib/libprocess_model.so
-usr/lib/libndr_svcctl.so
-usr/lib/librpc_ndr_lsa.so
-usr/lib/libregistry.so
-usr/lib/librpc_ndr_wins.so
-usr/lib/librpc_ndr_mgmt.so
-usr/lib/libndr_w32time.so
-usr/lib/librpc_ndr_echo.so
-usr/lib/libndr_policyagent.so
Deleted: branches/samba4/libsamba0.install
===================================================================
--- branches/samba4/libsamba0.install 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/libsamba0.install 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,102 +0,0 @@
-usr/lib/librpc_ndr_efs.so.*
-usr/lib/libndr_winstation.so.*
-usr/lib/libndr_samr.so.*
-usr/lib/libndr_table.so.*
-usr/lib/librpc_ndr_ntsvcs.so.*
-usr/lib/librpc_ndr_eventlog.so.*
-usr/lib/librpc_ndr_w32time.so.*
-usr/lib/librpc_ndr_rot.so.*
-usr/lib/libsamba-util.so.*
-usr/lib/libndr_wzcsvc.so.*
-usr/lib/libndr_dfs.so.*
-usr/lib/librpc_ndr_oxidresolver.so.*
-usr/lib/librpc_ndr_keysvc.so.*
-usr/lib/libndr_wkssvc.so.*
-usr/lib/librpc_ndr_drsuapi.so.*
-usr/lib/libtdr.so.*
-usr/lib/libndr_oxidresolver.so.*
-usr/lib/libndr_dssetup.so.*
-usr/lib/libndr_eventlog.so.*
-usr/lib/libdcerpc.so.*
-usr/lib/libndr_srvsvc.so.*
-usr/lib/librpc_ndr_dbgidl.so.*
-usr/lib/libsamba-net.so.*
-usr/lib/libsocket_wrapper.so.*
-usr/lib/libheimdal.so.*
-usr/lib/libndr_spoolss.so.*
-usr/lib/libndr_mgmt.so.*
-usr/lib/libcli_wrepl.so.*
-usr/lib/libtorture.so.*
-usr/lib/librpc_ndr_samr.so.*
-usr/lib/librpc_ndr_spoolss.so.*
-usr/lib/librpc_ndr_scerpc.so.*
-usr/lib/librpc_ndr_svcctl.so.*
-usr/lib/librpc_ndr_wkssvc.so.*
-usr/lib/libwinbind-client.so.*
-usr/lib/libndr_msgsvc.so.*
-usr/lib/libndr_remact.so.*
-usr/lib/libndr_lsa.so.*
-usr/lib/libsmbcalls.so.*
-usr/lib/libndr_dnsserver.so.*
-usr/lib/libndr_security.so.*
-usr/lib/libndr_unixinfo.so.*
-usr/lib/libndr_winreg.so.*
-usr/lib/librpc_ndr_atsvc.so.*
-usr/lib/librpc_ndr_netlogon.so.*
-usr/lib/librpc_ndr_trkwks.so.*
-usr/lib/libndr_atsvc.so.*
-usr/lib/libndr_dbgidl.so.*
-usr/lib/librpc_ndr_dfs.so.*
-usr/lib/libndr_trkwks.so.*
-usr/lib/libndr_browser.so.*
-usr/lib/libndr_audiosrv.so.*
-usr/lib/libndr_drsuapi.so.*
-usr/lib/libndr_keysvc.so.*
-usr/lib/libntvfs.so.*
-usr/lib/libndr_ntsvcs.so.*
-usr/lib/libndr_protected_storage.so.*
-usr/lib/librpc_ndr_msgsvc.so.*
-usr/lib/librpc_ndr_protected_storage.so.*
-usr/lib/libdynconfig.so.*
-usr/lib/libndr_netlogon.so.*
-usr/lib/librpc_ndr_unixinfo.so.*
-usr/lib/librpc_ndr_dsbackup.so.*
-usr/lib/libndr_xattr.so.*
-usr/lib/libndr.so.*
-usr/lib/libndr_epmapper.so.*
-usr/lib/librpc_ndr_epmapper.so.*
-usr/lib/librpc_ndr_remact.so.*
-usr/lib/librpc_ndr_winreg.so.*
-usr/lib/libndr_initshutdown.so.*
-usr/lib/libndr_drsblobs.so.*
-usr/lib/librpc_ndr_audiosrv.so.*
-usr/lib/librpc_ndr_dssetup.so.*
-usr/lib/libprocess_model.so.*
-usr/lib/libndr_svcctl.so.*
-usr/lib/librpc_ndr_lsa.so.*
-usr/lib/libregistry.so.*
-usr/lib/librpc_ndr_wins.so.*
-usr/lib/librpc_ndr_mgmt.so.*
-usr/lib/libndr_w32time.so.*
-usr/lib/librpc_ndr_echo.so.*
-usr/lib/libndr_policyagent.so.*
-usr/lib/libsamba-config.so.*
-usr/lib/libndr_efs.so.*
-usr/lib/libndr_winsrepl.so.*
-usr/lib/libndr_scerpc.so.*
-usr/lib/libndr_compression.so.*
-usr/lib/libcli_cldap.so.*
-usr/lib/librpc_ndr_policyagent.so.*
-usr/lib/libndr_wins.so.*
-usr/lib/libndr_dsbackup.so.*
-usr/lib/libndr_irpc.so.*
-usr/lib/libsamba3.so.*
-usr/lib/librpc_ndr_srvsvc.so.*
-usr/lib/librpc_ndr_initshutdown.so.*
-usr/lib/librpc_ndr_wzcsvc.so.*
-usr/lib/samba/registry/w95.so
-usr/lib/samba/registry/ldb.so
-usr/lib/samba/registry/nt4.so
-usr/lib/samba/registry/dir.so
-usr/bin/tdbdump
-usr/bin/samba3dump
Deleted: branches/samba4/libsamba0.postinst
===================================================================
--- branches/samba4/libsamba0.postinst 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/libsamba0.postinst 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,8 +0,0 @@
-#!/bin/sh
-#
-# postinst script for libsamba
-#
-# $Id$
-#
-
-#DEBHELPER#
Deleted: branches/samba4/libtalloc-dev.install
===================================================================
--- branches/samba4/libtalloc-dev.install 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/libtalloc-dev.install 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,4 +0,0 @@
-usr/include/samba-4.0/talloc.h
-usr/lib/pkgconfig/talloc.pc
-usr/lib/libtalloc.so
-usr/share/man/man3/talloc.3
Deleted: branches/samba4/libtalloc0.install
===================================================================
--- branches/samba4/libtalloc0.install 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/libtalloc0.install 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1 +0,0 @@
-usr/lib/libtalloc.so.0.*
Deleted: branches/samba4/libtalloc0.postinst
===================================================================
--- branches/samba4/libtalloc0.postinst 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/libtalloc0.postinst 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,12 +0,0 @@
-#!/bin/sh
-#
-# postinst script for libtalloc0
-#
-# $Id$
-#
-
-if [ "$1" = "configure" ]; then
- ldconfig
-fi
-
-#DEBHELPER#
Deleted: branches/samba4/libtdb-dev.install
===================================================================
--- branches/samba4/libtdb-dev.install 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/libtdb-dev.install 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,3 +0,0 @@
-usr/include/samba-4.0/tdb.h
-usr/lib/pkgconfig/tdb.pc
-usr/lib/libtdb.so
Deleted: branches/samba4/libtdb0.install
===================================================================
--- branches/samba4/libtdb0.install 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/libtdb0.install 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1 +0,0 @@
-usr/lib/libtdb.so.0.*
Deleted: branches/samba4/libtdb0.postinst
===================================================================
--- branches/samba4/libtdb0.postinst 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/libtdb0.postinst 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,12 +0,0 @@
-#!/bin/sh
-#
-# postinst script for libtdb0
-#
-# $Id$
-#
-
-if [ "$1" = "configure" ]; then
- ldconfig
-fi
-
-#DEBHELPER#
Deleted: branches/samba4/panic-action
===================================================================
--- branches/samba4/panic-action 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/panic-action 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,51 +0,0 @@
-#!/bin/sh
-
-# Redirect all output to our mail command
-(
- # We must be given a pid to look at
- if [ -z "$1" ]; then
- echo "$0 called with no arguments."
- exit 1
- fi
-
- if [ ! -d "/proc/$1" ]; then
- echo "$0: No such process: $1"
- exit 1
- fi
-
- # Find out what binary we're debugging
- BINARYNAME=`readlink "/proc/$1/exe"`
-
- # Generic header for our email
- echo "The Samba 'panic action' script, $0,"
- echo "was called for pid $1 ($BINARYNAME)."
- echo
-
- if [ -z "$BINARYNAME" ]; then
- echo "This means there was a problem with the program, such as a segfault."
- echo "However, the executable could not be found for process $1."
- echo "It may have died unexpectedly, or you may not have permission to"
- echo "debug the process."
- exit 1
- fi
-
- # No debugger
- if [ ! -x /usr/bin/gdb ]; then
- echo "This means there was a problem with the program, such as a segfault."
- echo "However, gdb was not found on your system, so the error could not be"
- echo "debugged. Please install the gdb package so that debugging information is"
- echo "available the next time such a problem occurs."
- exit 1
- fi
-
- echo "Below is a backtrace for this process generated with gdb, which shows"
- echo "the state of the program at the time the error occurred. "
- echo
- echo "If the problem persists, you are encouraged to first install the "
- echo "samba-dbg package which contains the debugging symbols for samba "
- echo "binaries. The, submit the provided information as a bug report to Debian. For"
- echo "information about the procedure for submitting bug reports , please see"
- echo "http://www.debian.org/Bugs/Reporting or the reportbug(1) manpage."
- echo
- gdb -x /etc/samba/gdbcommands -batch "$BINARYNAME" "$1"
-) | mail -s "Segfault in Samba" root
Deleted: branches/samba4/provision.smb.conf.patch
===================================================================
--- branches/samba4/provision.smb.conf.patch 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/provision.smb.conf.patch 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,9 +0,0 @@
---- provision.smb.conf.orig 2006-01-06 04:02:34.000000000 +0100
-+++ provision.smb.conf 2006-01-15 23:16:11.000000000 +0100
-@@ -3,5 +3,6 @@
- workgroup = ${DOMAIN}
- realm = ${REALM}
- server role = pdc
-+ panic action = /usr/share/samba/panic-action
-
-
Deleted: branches/samba4/rules
===================================================================
--- branches/samba4/rules 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/rules 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,80 +0,0 @@
-#!/usr/bin/make -f
-# By Jelmer Vernooij <jelmer at samba.org>
-
-SOURCEPATH=./source
-
-configure: configure-stamp
-configure-stamp:
- dh_testdir
- cd $(SOURCEPATH) && ./configure --with-fhs \
- --prefix=/usr \
- --mandir=/usr/share/man \
- --with-pam \
- --with-syslog \
- --with-readline \
- --with-ldap \
- --enable-dso
- cd $(SOURCEPATH)/pidl && perl Makefile.PL verbose INSTALLDIRS=vendor PREFIX=/usr
- touch $@
-
-build: build-stamp
-build-stamp: configure
- dh_testdir
- $(MAKE) -C $(SOURCEPATH) pch
- $(MAKE) -C $(SOURCEPATH) all
- $(MAKE) -C $(SOURCEPATH)/pidl all
- touch $@
-
-clean:
- dh_testdir
- dh_testroot
- dh_clean
- $(RM) debian/tmp
- -$(MAKE) -C $(SOURCEPATH) clean
- $(RM) build-stamp configure-stamp
-
-binary-indep: build install
- dh_installdocs -i
- dh_installchangelogs -i
- dh_compress -i
- dh_fixperms -i
- dh_installdebconf -i
- dh_installdeb -i
- dh_gencontrol -i
- dh_md5sums -i
- dh_builddeb -i
-
-install: build
- dh_clean -k
- dh_installdirs
- mkdir -p $(CURDIR)/debian/tmp/usr/share/man/man1
- mkdir -p $(CURDIR)/debian/tmp/etc/samba
- $(MAKE) -C $(SOURCEPATH) install DESTDIR=$(CURDIR)/debian/tmp
- $(MAKE) -C $(SOURCEPATH) manpages installman DESTDIR=$(CURDIR)/debian/tmp
- $(MAKE) -C $(SOURCEPATH)/pidl install DESTDIR=$(CURDIR)/debian/tmp
- install -m 755 $(CURDIR)/debian/panic-action $(CURDIR)/debian/tmp/usr/share/samba
- install -m 644 $(CURDIR)/debian/gdbcommands $(CURDIR)/debian/tmp/etc/samba
- dh_testdir
- dh_testroot
- dh_install --sourcedir=debian/tmp --list-missing
- #--fail-missing
-
-binary-arch: build install
- dh_installdocs -a debian/README.building NEWS
- dh_installchangelogs -a
- dh_strip -a
- dh_perl -a
- dh_compress -a
- dh_fixperms -a
- dh_makeshlibs -a
- dh_installinit -a
- dh_installdebconf -a
- dh_installdeb -a
- dh_shlibdeps -a
- dh_gencontrol -a
- dh_md5sums -a
- dh_builddeb -a
-
-binary: binary-arch binary-indep
-
-.PHONY: configure build install binary binary-arch binary-indep clean
Deleted: branches/samba4/samba-clients.install
===================================================================
--- branches/samba4/samba-clients.install 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/samba-clients.install 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,7 +0,0 @@
-usr/bin/getntacl
-usr/bin/cifsdd
-usr/bin/net
-usr/bin/nmblookup
-usr/bin/setnttoken
-usr/bin/smbclient
-usr/share/man/man1/getntacl.1
Deleted: branches/samba4/samba-common.config
===================================================================
--- branches/samba4/samba-common.config 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/samba-common.config 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,20 +0,0 @@
-#! /bin/sh
-
-set -e
-
-. /usr/share/debconf/confmodule
-
-db_title "Samba Server"
-
-#
-# See if we have an smb.conf. If not, we ask for realm and domain
-# so we can generate a new one.
-#
-if [ ! -f /etc/samba/smb.conf ]; then
- db_input medium samba-common/realm || true
- db_go || true
-
- db_input medium samba-common/domain || true
- db_go || true
-fi
-
Deleted: branches/samba4/samba-common.dirs
===================================================================
--- branches/samba4/samba-common.dirs 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/samba-common.dirs 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,5 +0,0 @@
-etc/samba/tls
-usr/lib/samba
-usr/share/samba
-var/cache/samba
-var/run/samba
Deleted: branches/samba4/samba-common.files
===================================================================
Deleted: branches/samba4/samba-common.install
===================================================================
--- branches/samba4/samba-common.install 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/samba-common.install 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,5 +0,0 @@
-etc/samba/gdbcommands
-usr/bin/testparm
-usr/share/samba/*.dat
-usr/share/samba/js
-usr/share/samba/panic-action
Deleted: branches/samba4/samba-common.postinst
===================================================================
--- branches/samba4/samba-common.postinst 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/samba-common.postinst 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,32 +0,0 @@
-#! /bin/sh
-
-set -e
-
-. /usr/share/debconf/confmodule
-
-if [ "$1" = "configure" ]; then
- # Don't overwrite an existing smb.conf file.
- if [ -f /etc/samba/smb.conf ]; then
- exit
- fi
-
- db_get samba-common/realm || true
- REALM="$RET"
-
- db_get samba-common/domain || true
- DOMAIN="$RET"
-
- HOSTNAME=$( hostname -s )
-
- if [ -n "$REALM" -a -n "$DOMAIN" ]; then
- cat <<EOF >/etc/samba/smb.conf
-[globals]
- netbios name = $HOSTNAME
- workgroup = $DOMAIN
- realm = $REALM
- panic action = /usr/share/samba/panic-action
-EOF
- fi
-fi
-
-#DEBHELPER#
Deleted: branches/samba4/samba-common.postrm
===================================================================
--- branches/samba4/samba-common.postrm 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/samba-common.postrm 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,10 +0,0 @@
-#! /bin/sh
-
-set -e
-
-if [ "$1" = purge ]; then
- # Remove any files left in /etc/samba/
- rm -Rf /etc/samba/
-fi
-
-#DEBHELPER#
Deleted: branches/samba4/samba-common.templates
===================================================================
--- branches/samba4/samba-common.templates 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/samba-common.templates 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,12 +0,0 @@
-Template: samba-common/realm
-Type: string
-_Description: Realm
- What Kerberos realm will your server be in? In many cases, this will be
- the same as your DNS domain name (ie. YOUR.REALM).
-
-Template: samba-common/domain
-Type: string
-_Description: Domain
- What will be the domain of your server? This is also known as the
- "workgroup" of your server, and is typically a short name without any dots
- (ie. DOMAIN).
Deleted: branches/samba4/samba-dev.install
===================================================================
Deleted: branches/samba4/samba-gtk-frontends.install
===================================================================
--- branches/samba4/samba-gtk-frontends.install 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/samba-gtk-frontends.install 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,6 +0,0 @@
-usr/bin/gregedit
-usr/bin/gepdump
-usr/bin/gwcrontab
-usr/share/man/man1/gregedit.1
-usr/share/man/man1/gepdump.1
-usr/share/man/man1/gwcrontab.1
Deleted: branches/samba4/samba-testsuite.install
===================================================================
--- branches/samba4/samba-testsuite.install 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/samba-testsuite.install 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,12 +0,0 @@
-usr/bin/smbtorture
-usr/bin/tdbtorture
-usr/bin/ndrdump
-usr/bin/gentest
-usr/bin/locktest
-usr/bin/masktest
-usr/lib/samba/torture
-usr/share/man/man1/smbtorture.1
-usr/share/man/man1/ndrdump.1
-usr/share/man/man1/gentest.1
-usr/share/man/man1/locktest.1
-usr/share/man/man1/masktest.1
Deleted: branches/samba4/samba.config
===================================================================
--- branches/samba4/samba.config 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/samba.config 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,40 +0,0 @@
-#! /bin/sh
-
-set -e
-
-. /usr/share/debconf/confmodule
-
-db_title "Samba Server"
-
-if [ "$1" = "configure" ]; then
- #
- # Are we upgrading from Samba 3, and already have a configuration file?
- # If so, the user might want to try the automatic upgrading.
- #
- if [ -n "$2" ] && dpkg --compare-versions "$2" lt "3.9.0"; then
- if [ -f /etc/samba/smb.conf ]; then
- db_input medium samba/upgrade-from-v3 || true
- db_go || true
-
- # The realm can't be easily autodetected from the Samba 3
- # settings.
- db_input medium samba-common/realm || true
- db_go || true
- fi
- fi
-
- #
- # First-time installation, perhaps? If so, the user could want to
- # set up Samba as a PDC, if the other parameters are in place.
- #
- db_get samba-common/realm || true
- REALM="$RET"
-
- db_get samba-common/domain || true
- DOMAIN="$RET"
-
- if [ -z "$2" -a -n "$REALM" -a -n "$DOMAIN" ]; then
- db_input medium samba/setup-pdc || true
- db_go || true
- fi
-fi
Deleted: branches/samba4/samba.dirs
===================================================================
--- branches/samba4/samba.dirs 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/samba.dirs 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1 +0,0 @@
-var/lib/samba
Deleted: branches/samba4/samba.init
===================================================================
--- branches/samba4/samba.init 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/samba.init 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,56 +0,0 @@
-#! /bin/sh
-
-#
-# Start/stops the Samba daemon (smbd).
-# Adapted from the Samba 3 packages.
-#
-
-SMBDPID=/var/run/samba/smbd.pid
-
-# clear conflicting settings from the environment
-unset TMPDIR
-
-# See if the daemon and the config file are there
-test -x /usr/sbin/smbd -a -r /etc/samba/smb.conf || exit 0
-
-. /lib/lsb/init-functions
-
-case "$1" in
- start)
- log_daemon_msg "Starting Samba 4 daemon" "smbd"
-
- if ! start-stop-daemon --start --quiet --oknodo --exec /usr/sbin/smbd -- -D; then
- log_end_msg 1
- exit 1
- fi
-
- log_end_msg 0
- ;;
- stop)
- log_daemon_msg "Stopping Samba 4 daemon" "smbd"
-
- start-stop-daemon --stop --quiet --name smbd $SMBDPID
- # Wait a little and remove stale PID file
- sleep 1
- if [ -f $SMBDPID ] && ! ps h `cat $SMBDPID` > /dev/null
- then
- # Stale PID file (smbd was succesfully stopped),
- # remove it (should be removed by smbd itself IMHO.)
- rm -f $SMBDPID
- fi
-
- log_end_msg 0
-
- ;;
- restart|force-reload)
- $0 stop
- sleep 1
- $0 start
- ;;
- *)
- echo "Usage: /etc/init.d/samba {start|stop|restart|force-reload}"
- exit 1
- ;;
-esac
-
-exit 0
Deleted: branches/samba4/samba.install
===================================================================
--- branches/samba4/samba.install 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/samba.install 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,14 +0,0 @@
-usr/sbin/smbd
-usr/bin/ntlm_auth
-usr/bin/smbstatus
-usr/bin/smbscript
-usr/lib/samba/smbcalls
-usr/lib/samba/process_model
-usr/lib/samba/auth
-usr/lib/samba/service
-usr/lib/samba/ntptr
-usr/lib/samba/ntvfs
-usr/lib/samba/dcerpc_server
-usr/share/samba/setup
-usr/share/man/man1/ntlm_auth.1
-usr/share/man/man8/smbd.8
Deleted: branches/samba4/samba.postinst
===================================================================
--- branches/samba4/samba.postinst 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/samba.postinst 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,44 +0,0 @@
-#! /bin/sh
-
-set -e
-
-. /usr/share/debconf/confmodule
-
-if [ "$1" = "configure" ]; then
- # See if we're upgrading from Samba 3
- if [ ! -z "$2" ]; then
- if dpkg --compare-versions "$2" lt "3.9.0"; then
- db_get samba/upgrade-from-v3 || true
- if [ "$RET" = "true" ]; then
- db_get samba-common/realm || true
- REALM="$RET"
-
- mv /etc/samba/smb.conf /etc/samba/smb.conf.samba3
- /usr/lib/samba/setup/upgrade --realm="$REALM" /var/lib/samba /etc/samba/smb.conf.samba3
- fi
- fi
- else
- db_get samba/setup-pdc || true
-
- if [ "$RET" = "true" ]; then
- # add "server role = pdc" to [globals]
- if grep -q '^\[globals\]' /etc/samba/smb.conf; then
- grep -v '^\s*server role\s*=' /etc/samba/smb.conf |
- sed 's/\[globals\]/&\n\tserver role = pdc/i' > /etc/samba/smb.conf.new
- mv /etc/samba/smb.conf.new /etc/samba/smb.conf
- fi
-
- if [ -f /etc/samba/smb.conf ]; then
- REALM=$( testparm --parameter-name=realm --suppress-prompt )
- DOMAIN=$( testparm --parameter-name=workgroup --suppress-prompt )
-
- /usr/lib/samba/setup/provision --realm="$REALM" --domain="$DOMAIN"
- fi
- fi
- fi
-fi
-db_stop
-
-#DEBHELPER#
-
-exit 0
Deleted: branches/samba4/samba.postrm
===================================================================
--- branches/samba4/samba.postrm 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/samba.postrm 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,14 +0,0 @@
-#! /bin/sh -e
-
-set -e
-
-if [ "$1" = purge ]; then
-
- # Remove Samba's state files, both volatile and non-volatile
- rm -Rf /var/run/samba/ /var/cache/samba/ /var/lib/samba
-
- # Remove log files
- rm -Rf /var/log/samba/
-fi
-
-#DEBHELPER#
Deleted: branches/samba4/samba.templates
===================================================================
--- branches/samba4/samba.templates 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/samba.templates 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,19 +0,0 @@
-Template: samba/upgrade-from-v3
-Type: boolean
-Default: true
-_Description: Upgrade from Samba 3?
- Do you want to migrate your existing configuration files from Samba 3 to
- Samba 4? This is likely to fail for complex setups, but should provide a
- good starting point for most existing installations.
-
-Template: samba/setup-pdc
-Type: boolean
-Default: false
-_Description: Set up Samba 4 as a PDC?
- Do you want to set up Samba 4 as an Active Directory PDC? If you answer
- "no", Samba will be left unconfigured, and you will have to provision and
- make configuration files by hand.
- .
- Note that even if you answer "yes", you will need to set up DNS such that
- it serves the data from the zone file in that directory before you can use
- your Active Directory domain.
Deleted: branches/samba4/swat.install
===================================================================
--- branches/samba4/swat.install 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/swat.install 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1 +0,0 @@
-usr/share/samba/swat
Deleted: branches/samba4/winregistry-tools.install
===================================================================
--- branches/samba4/winregistry-tools.install 2007-05-06 21:59:41 UTC (rev 1367)
+++ branches/samba4/winregistry-tools.install 2007-05-09 13:08:47 UTC (rev 1368)
@@ -1,9 +0,0 @@
-usr/bin/regshell
-usr/bin/regpatch
-usr/bin/regdiff
-usr/bin/regtree
-usr/bin/winreg
-usr/share/man/man1/regshell.1
-usr/share/man/man1/regpatch.1
-usr/share/man/man1/regdiff.1
-usr/share/man/man1/regtree.1
More information about the Pkg-samba-maint
mailing list