[Pkg-shadow-commits] r1710 - in debian/trunk/tests/usertools: . 02 02/config 02/config/etc 02/config/etc/default 02/data 02/useradd_change_default_EXPIRE 02/useradd_change_default_GROUP 02/useradd_change_default_HOME 02/useradd_change_default_INACTIVE 02/useradd_change_default_SHELL 02/useradd_change_defaults
nekral-guest at alioth.debian.org
nekral-guest at alioth.debian.org
Sat Jan 12 15:18:12 UTC 2008
Author: nekral-guest
Date: 2008-01-12 15:18:12 +0000 (Sat, 12 Jan 2008)
New Revision: 1710
Added:
debian/trunk/tests/usertools/02/
debian/trunk/tests/usertools/02/config.txt
debian/trunk/tests/usertools/02/config/
debian/trunk/tests/usertools/02/config/etc/
debian/trunk/tests/usertools/02/config/etc/default/
debian/trunk/tests/usertools/02/config/etc/default/useradd
debian/trunk/tests/usertools/02/config/etc/group
debian/trunk/tests/usertools/02/config/etc/gshadow
debian/trunk/tests/usertools/02/config/etc/passwd
debian/trunk/tests/usertools/02/config/etc/shadow
debian/trunk/tests/usertools/02/data/
debian/trunk/tests/usertools/02/data/useradd-D.out
debian/trunk/tests/usertools/02/data/useradd-D_default_values.out
debian/trunk/tests/usertools/02/useradd_change_default_EXPIRE.test
debian/trunk/tests/usertools/02/useradd_change_default_EXPIRE/
debian/trunk/tests/usertools/02/useradd_change_default_EXPIRE/useradd.default
debian/trunk/tests/usertools/02/useradd_change_default_GROUP.test
debian/trunk/tests/usertools/02/useradd_change_default_GROUP/
debian/trunk/tests/usertools/02/useradd_change_default_GROUP/useradd.default
debian/trunk/tests/usertools/02/useradd_change_default_HOME.test
debian/trunk/tests/usertools/02/useradd_change_default_HOME/
debian/trunk/tests/usertools/02/useradd_change_default_HOME/useradd.default
debian/trunk/tests/usertools/02/useradd_change_default_INACTIVE.test
debian/trunk/tests/usertools/02/useradd_change_default_INACTIVE/
debian/trunk/tests/usertools/02/useradd_change_default_INACTIVE/useradd.default
debian/trunk/tests/usertools/02/useradd_change_default_SHELL.test
debian/trunk/tests/usertools/02/useradd_change_default_SHELL/
debian/trunk/tests/usertools/02/useradd_change_default_SHELL/useradd.default
debian/trunk/tests/usertools/02/useradd_change_defaults.test
debian/trunk/tests/usertools/02/useradd_change_defaults/
debian/trunk/tests/usertools/02/useradd_change_defaults/useradd.default
debian/trunk/tests/usertools/02/useradd_default_default_values.test
debian/trunk/tests/usertools/02/useradd_get_default_values.test
Log:
Add tests to test the options used to set the default values in the
useradd.default file.
Added: debian/trunk/tests/usertools/02/config/etc/default/useradd
===================================================================
--- debian/trunk/tests/usertools/02/config/etc/default/useradd (rev 0)
+++ debian/trunk/tests/usertools/02/config/etc/default/useradd 2008-01-12 15:18:12 UTC (rev 1710)
@@ -0,0 +1,37 @@
+# Default values for useradd(8)
+#
+# The SHELL variable specifies the default login shell on your
+# system.
+# Similar to DHSELL in adduser. However, we use "sh" here because
+# useradd is a low level utility and should be as general
+# as possible
+SHELL=/bin/sh
+#
+# The default group for users
+# 100=users on Debian systems
+# Same as USERS_GID in adduser
+# This argument is used when the -n flag is specified.
+# The default behavior (when -n and -g are not specified) is to create a
+# primary user group with the same name as the user being added to the
+# system.
+# GROUP=100
+#
+# The default home directory. Same as DHOME for adduser
+# HOME=/home
+#
+# The number of days after a password expires until the account
+# is permanently disabled
+# INACTIVE=-1
+#
+# The default expire date
+# EXPIRE=
+#
+# The SKEL variable specifies the directory containing "skeletal" user
+# files; in other words, files such as a sample .profile that will be
+# copied to the new user's home directory when it is created.
+# SKEL=/etc/skel
+#
+# Defines whether the mail spool should be created while
+# creating the account
+# CREATE_MAIL_SPOOL=yes
+
Added: debian/trunk/tests/usertools/02/config/etc/group
===================================================================
--- debian/trunk/tests/usertools/02/config/etc/group (rev 0)
+++ debian/trunk/tests/usertools/02/config/etc/group 2008-01-12 15:18:12 UTC (rev 1710)
@@ -0,0 +1,42 @@
+root:x:0:
+daemon:x:1:
+bin:x:2:
+sys:x:3:
+adm:x:4:
+tty:x:5:
+disk:x:6:
+lp:x:7:
+mail:x:8:
+news:x:9:
+uucp:x:10:
+man:x:12:
+proxy:x:13:
+kmem:x:15:
+dialout:x:20:
+fax:x:21:
+voice:x:22:
+cdrom:x:24:
+floppy:x:25:
+tape:x:26:
+sudo:x:27:
+audio:x:29:
+dip:x:30:
+www-data:x:33:
+backup:x:34:
+operator:x:37:
+list:x:38:
+irc:x:39:
+src:x:40:
+gnats:x:41:
+shadow:x:42:
+utmp:x:43:
+video:x:44:
+sasl:x:45:
+plugdev:x:46:
+staff:x:50:
+games:x:60:
+users:x:100:
+nogroup:x:65534:
+crontab:x:101:
+Debian-exim:x:102:
+myuser:x:424242:
Added: debian/trunk/tests/usertools/02/config/etc/gshadow
===================================================================
--- debian/trunk/tests/usertools/02/config/etc/gshadow (rev 0)
+++ debian/trunk/tests/usertools/02/config/etc/gshadow 2008-01-12 15:18:12 UTC (rev 1710)
@@ -0,0 +1,42 @@
+root:*::
+daemon:*::
+bin:*::
+sys:*::
+adm:*::
+tty:*::
+disk:*::
+lp:*::
+mail:*::
+news:*::
+uucp:*::
+man:*::
+proxy:*::
+kmem:*::
+dialout:*::
+fax:*::
+voice:*::
+cdrom:*::
+floppy:*::
+tape:*::
+sudo:*::
+audio:*::
+dip:*::
+www-data:*::
+backup:*::
+operator:*::
+list:*::
+irc:*::
+src:*::
+gnats:*::
+shadow:*::
+utmp:*::
+video:*::
+sasl:*::
+plugdev:*::
+staff:*::
+games:*::
+users:*::
+nogroup:*::
+crontab:x::
+Debian-exim:x::
+myuser:x::
Added: debian/trunk/tests/usertools/02/config/etc/passwd
===================================================================
--- debian/trunk/tests/usertools/02/config/etc/passwd (rev 0)
+++ debian/trunk/tests/usertools/02/config/etc/passwd 2008-01-12 15:18:12 UTC (rev 1710)
@@ -0,0 +1,21 @@
+root:x:0:0:root:/root:/bin/bash
+daemon:x:1:1:daemon:/usr/sbin:/bin/sh
+bin:x:2:2:bin:/bin:/bin/sh
+sys:x:3:3:sys:/dev:/bin/sh
+sync:x:4:65534:sync:/bin:/bin/sync
+games:x:5:60:games:/usr/games:/bin/sh
+man:x:6:12:man:/var/cache/man:/bin/sh
+lp:x:7:7:lp:/var/spool/lpd:/bin/sh
+mail:x:8:8:mail:/var/mail:/bin/sh
+news:x:9:9:news:/var/spool/news:/bin/sh
+uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh
+proxy:x:13:13:proxy:/bin:/bin/sh
+www-data:x:33:33:www-data:/var/www:/bin/sh
+backup:x:34:34:backup:/var/backups:/bin/sh
+list:x:38:38:Mailing List Manager:/var/list:/bin/sh
+irc:x:39:39:ircd:/var/run/ircd:/bin/sh
+gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh
+nobody:x:65534:65534:nobody:/nonexistent:/bin/sh
+Debian-exim:x:102:102::/var/spool/exim4:/bin/false
+myuser:x:424242:424242::/home:/bin/bash
+testsuite::424243:424243::/home:/bin/bash
Added: debian/trunk/tests/usertools/02/config/etc/shadow
===================================================================
--- debian/trunk/tests/usertools/02/config/etc/shadow (rev 0)
+++ debian/trunk/tests/usertools/02/config/etc/shadow 2008-01-12 15:18:12 UTC (rev 1710)
@@ -0,0 +1,20 @@
+root:$1$NBLBLIXb$WUgojj1bNuxWEADQGt1m9.:12991:0:99999:7:::
+daemon:*:12977:0:99999:7:::
+bin:*:12977:0:99999:7:::
+sys:*:12977:0:99999:7:::
+sync:*:12977:0:99999:7:::
+games:*:12977:0:99999:7:::
+man:*:12977:0:99999:7:::
+lp:*:12977:0:99999:7:::
+mail:*:12977:0:99999:7:::
+news:*:12977:0:99999:7:::
+uucp:*:12977:0:99999:7:::
+proxy:*:12977:0:99999:7:::
+www-data:*:12977:0:99999:7:::
+backup:*:12977:0:99999:7:::
+list:*:12977:0:99999:7:::
+irc:*:12977:0:99999:7:::
+gnats:*:12977:0:99999:7:::
+nobody:*:12977:0:99999:7:::
+Debian-exim:!:12977:0:99999:7:::
+myuser:$1$yQnIAZWV$gDAMB2IkqaONgrQiRdo4y.:12991:0:99999:7:::
Added: debian/trunk/tests/usertools/02/config.txt
===================================================================
--- debian/trunk/tests/usertools/02/config.txt (rev 0)
+++ debian/trunk/tests/usertools/02/config.txt 2008-01-12 15:18:12 UTC (rev 1710)
@@ -0,0 +1,3 @@
+# no testsuite password
+# root password: rootF00barbaz
+# myuser password: myuserF00barbaz
Added: debian/trunk/tests/usertools/02/data/useradd-D.out
===================================================================
--- debian/trunk/tests/usertools/02/data/useradd-D.out (rev 0)
+++ debian/trunk/tests/usertools/02/data/useradd-D.out 2008-01-12 15:18:12 UTC (rev 1710)
@@ -0,0 +1,7 @@
+GROUP=100
+HOME=/home
+INACTIVE=-1
+EXPIRE=
+SHELL=/bin/sh
+SKEL=/etc/skel
+CREATE_MAIL_SPOOL=no
Added: debian/trunk/tests/usertools/02/data/useradd-D_default_values.out
===================================================================
--- debian/trunk/tests/usertools/02/data/useradd-D_default_values.out (rev 0)
+++ debian/trunk/tests/usertools/02/data/useradd-D_default_values.out 2008-01-12 15:18:12 UTC (rev 1710)
@@ -0,0 +1,7 @@
+GROUP=100
+HOME=/home
+INACTIVE=-1
+EXPIRE=
+SHELL=
+SKEL=/etc/skel
+CREATE_MAIL_SPOOL=no
Added: debian/trunk/tests/usertools/02/useradd_change_default_EXPIRE/useradd.default
===================================================================
--- debian/trunk/tests/usertools/02/useradd_change_default_EXPIRE/useradd.default (rev 0)
+++ debian/trunk/tests/usertools/02/useradd_change_default_EXPIRE/useradd.default 2008-01-12 15:18:12 UTC (rev 1710)
@@ -0,0 +1,43 @@
+# Default values for useradd(8)
+#
+# The SHELL variable specifies the default login shell on your
+# system.
+# Similar to DHSELL in adduser. However, we use "sh" here because
+# useradd is a low level utility and should be as general
+# as possible
+SHELL=/bin/sh
+#
+# The default group for users
+# 100=users on Debian systems
+# Same as USERS_GID in adduser
+# This argument is used when the -n flag is specified.
+# The default behavior (when -n and -g are not specified) is to create a
+# primary user group with the same name as the user being added to the
+# system.
+# GROUP=100
+#
+# The default home directory. Same as DHOME for adduser
+# HOME=/home
+#
+# The number of days after a password expires until the account
+# is permanently disabled
+# INACTIVE=-1
+#
+# The default expire date
+# EXPIRE=
+#
+# The SKEL variable specifies the directory containing "skeletal" user
+# files; in other words, files such as a sample .profile that will be
+# copied to the new user's home directory when it is created.
+# SKEL=/etc/skel
+#
+# Defines whether the mail spool should be created while
+# creating the account
+# CREATE_MAIL_SPOOL=yes
+
+GROUP=100
+HOME=/home
+INACTIVE=-1
+EXPIRE=1979-11-24
+SKEL=/etc/skel
+CREATE_MAIL_SPOOL=no
Added: debian/trunk/tests/usertools/02/useradd_change_default_EXPIRE.test
===================================================================
--- debian/trunk/tests/usertools/02/useradd_change_default_EXPIRE.test (rev 0)
+++ debian/trunk/tests/usertools/02/useradd_change_default_EXPIRE.test 2008-01-12 15:18:12 UTC (rev 1710)
@@ -0,0 +1,30 @@
+#!/bin/sh
+
+set -e
+
+cd $(dirname $0)
+
+. ../../common/config.sh
+. ../../common/log.sh
+
+log_start "$0" "useradd -D: get default values"
+
+save_config
+
+# restore the files on exit
+trap 'log_status "$0" "FAILURE"; restore_config' 0
+
+change_config
+
+echo -n "Change default shell (useradd -D --expiredate 1979-11-24)..."
+useradd -D --expiredate 1979-11-24
+echo "OK"
+
+echo -n "Check the default values..."
+diff -au useradd_change_default_EXPIRE/useradd.default /etc/default/useradd
+echo "OK"
+
+log_status "$0" "SUCCESS"
+restore_config
+trap '' 0
+
Property changes on: debian/trunk/tests/usertools/02/useradd_change_default_EXPIRE.test
___________________________________________________________________
Name: svn:executable
+ *
Added: debian/trunk/tests/usertools/02/useradd_change_default_GROUP/useradd.default
===================================================================
--- debian/trunk/tests/usertools/02/useradd_change_default_GROUP/useradd.default (rev 0)
+++ debian/trunk/tests/usertools/02/useradd_change_default_GROUP/useradd.default 2008-01-12 15:18:12 UTC (rev 1710)
@@ -0,0 +1,43 @@
+# Default values for useradd(8)
+#
+# The SHELL variable specifies the default login shell on your
+# system.
+# Similar to DHSELL in adduser. However, we use "sh" here because
+# useradd is a low level utility and should be as general
+# as possible
+SHELL=/bin/sh
+#
+# The default group for users
+# 100=users on Debian systems
+# Same as USERS_GID in adduser
+# This argument is used when the -n flag is specified.
+# The default behavior (when -n and -g are not specified) is to create a
+# primary user group with the same name as the user being added to the
+# system.
+# GROUP=100
+#
+# The default home directory. Same as DHOME for adduser
+# HOME=/home
+#
+# The number of days after a password expires until the account
+# is permanently disabled
+# INACTIVE=-1
+#
+# The default expire date
+# EXPIRE=
+#
+# The SKEL variable specifies the directory containing "skeletal" user
+# files; in other words, files such as a sample .profile that will be
+# copied to the new user's home directory when it is created.
+# SKEL=/etc/skel
+#
+# Defines whether the mail spool should be created while
+# creating the account
+# CREATE_MAIL_SPOOL=yes
+
+GROUP=65534
+HOME=/home
+INACTIVE=-1
+EXPIRE=
+SKEL=/etc/skel
+CREATE_MAIL_SPOOL=no
Added: debian/trunk/tests/usertools/02/useradd_change_default_GROUP.test
===================================================================
--- debian/trunk/tests/usertools/02/useradd_change_default_GROUP.test (rev 0)
+++ debian/trunk/tests/usertools/02/useradd_change_default_GROUP.test 2008-01-12 15:18:12 UTC (rev 1710)
@@ -0,0 +1,30 @@
+#!/bin/sh
+
+set -e
+
+cd $(dirname $0)
+
+. ../../common/config.sh
+. ../../common/log.sh
+
+log_start "$0" "useradd -D: get default values"
+
+save_config
+
+# restore the files on exit
+trap 'log_status "$0" "FAILURE"; restore_config' 0
+
+change_config
+
+echo -n "Change default shell (useradd -D --gid nogroup)..."
+useradd -D --gid nogroup
+echo "OK"
+
+echo -n "Check the default values..."
+diff -au useradd_change_default_GROUP/useradd.default /etc/default/useradd
+echo "OK"
+
+log_status "$0" "SUCCESS"
+restore_config
+trap '' 0
+
Property changes on: debian/trunk/tests/usertools/02/useradd_change_default_GROUP.test
___________________________________________________________________
Name: svn:executable
+ *
Added: debian/trunk/tests/usertools/02/useradd_change_default_HOME/useradd.default
===================================================================
--- debian/trunk/tests/usertools/02/useradd_change_default_HOME/useradd.default (rev 0)
+++ debian/trunk/tests/usertools/02/useradd_change_default_HOME/useradd.default 2008-01-12 15:18:12 UTC (rev 1710)
@@ -0,0 +1,43 @@
+# Default values for useradd(8)
+#
+# The SHELL variable specifies the default login shell on your
+# system.
+# Similar to DHSELL in adduser. However, we use "sh" here because
+# useradd is a low level utility and should be as general
+# as possible
+SHELL=/bin/sh
+#
+# The default group for users
+# 100=users on Debian systems
+# Same as USERS_GID in adduser
+# This argument is used when the -n flag is specified.
+# The default behavior (when -n and -g are not specified) is to create a
+# primary user group with the same name as the user being added to the
+# system.
+# GROUP=100
+#
+# The default home directory. Same as DHOME for adduser
+# HOME=/home
+#
+# The number of days after a password expires until the account
+# is permanently disabled
+# INACTIVE=-1
+#
+# The default expire date
+# EXPIRE=
+#
+# The SKEL variable specifies the directory containing "skeletal" user
+# files; in other words, files such as a sample .profile that will be
+# copied to the new user's home directory when it is created.
+# SKEL=/etc/skel
+#
+# Defines whether the mail spool should be created while
+# creating the account
+# CREATE_MAIL_SPOOL=yes
+
+GROUP=100
+HOME=/tmp
+INACTIVE=-1
+EXPIRE=
+SKEL=/etc/skel
+CREATE_MAIL_SPOOL=no
Added: debian/trunk/tests/usertools/02/useradd_change_default_HOME.test
===================================================================
--- debian/trunk/tests/usertools/02/useradd_change_default_HOME.test (rev 0)
+++ debian/trunk/tests/usertools/02/useradd_change_default_HOME.test 2008-01-12 15:18:12 UTC (rev 1710)
@@ -0,0 +1,30 @@
+#!/bin/sh
+
+set -e
+
+cd $(dirname $0)
+
+. ../../common/config.sh
+. ../../common/log.sh
+
+log_start "$0" "useradd -D: get default values"
+
+save_config
+
+# restore the files on exit
+trap 'log_status "$0" "FAILURE"; restore_config' 0
+
+change_config
+
+echo -n "Change default shell (useradd -D --base-dir /tmp)..."
+useradd -D --base-dir /tmp
+echo "OK"
+
+echo -n "Check the default values..."
+diff -au useradd_change_default_HOME/useradd.default /etc/default/useradd
+echo "OK"
+
+log_status "$0" "SUCCESS"
+restore_config
+trap '' 0
+
Property changes on: debian/trunk/tests/usertools/02/useradd_change_default_HOME.test
___________________________________________________________________
Name: svn:executable
+ *
Added: debian/trunk/tests/usertools/02/useradd_change_default_INACTIVE/useradd.default
===================================================================
--- debian/trunk/tests/usertools/02/useradd_change_default_INACTIVE/useradd.default (rev 0)
+++ debian/trunk/tests/usertools/02/useradd_change_default_INACTIVE/useradd.default 2008-01-12 15:18:12 UTC (rev 1710)
@@ -0,0 +1,43 @@
+# Default values for useradd(8)
+#
+# The SHELL variable specifies the default login shell on your
+# system.
+# Similar to DHSELL in adduser. However, we use "sh" here because
+# useradd is a low level utility and should be as general
+# as possible
+SHELL=/bin/sh
+#
+# The default group for users
+# 100=users on Debian systems
+# Same as USERS_GID in adduser
+# This argument is used when the -n flag is specified.
+# The default behavior (when -n and -g are not specified) is to create a
+# primary user group with the same name as the user being added to the
+# system.
+# GROUP=100
+#
+# The default home directory. Same as DHOME for adduser
+# HOME=/home
+#
+# The number of days after a password expires until the account
+# is permanently disabled
+# INACTIVE=-1
+#
+# The default expire date
+# EXPIRE=
+#
+# The SKEL variable specifies the directory containing "skeletal" user
+# files; in other words, files such as a sample .profile that will be
+# copied to the new user's home directory when it is created.
+# SKEL=/etc/skel
+#
+# Defines whether the mail spool should be created while
+# creating the account
+# CREATE_MAIL_SPOOL=yes
+
+GROUP=100
+HOME=/home
+INACTIVE=10
+EXPIRE=
+SKEL=/etc/skel
+CREATE_MAIL_SPOOL=no
Added: debian/trunk/tests/usertools/02/useradd_change_default_INACTIVE.test
===================================================================
--- debian/trunk/tests/usertools/02/useradd_change_default_INACTIVE.test (rev 0)
+++ debian/trunk/tests/usertools/02/useradd_change_default_INACTIVE.test 2008-01-12 15:18:12 UTC (rev 1710)
@@ -0,0 +1,30 @@
+#!/bin/sh
+
+set -e
+
+cd $(dirname $0)
+
+. ../../common/config.sh
+. ../../common/log.sh
+
+log_start "$0" "useradd -D: get default values"
+
+save_config
+
+# restore the files on exit
+trap 'log_status "$0" "FAILURE"; restore_config' 0
+
+change_config
+
+echo -n "Change default shell (useradd -D --inactive 10)..."
+useradd -D --inactive 10
+echo "OK"
+
+echo -n "Check the default values..."
+diff -au useradd_change_default_INACTIVE/useradd.default /etc/default/useradd
+echo "OK"
+
+log_status "$0" "SUCCESS"
+restore_config
+trap '' 0
+
Property changes on: debian/trunk/tests/usertools/02/useradd_change_default_INACTIVE.test
___________________________________________________________________
Name: svn:executable
+ *
Added: debian/trunk/tests/usertools/02/useradd_change_default_SHELL/useradd.default
===================================================================
--- debian/trunk/tests/usertools/02/useradd_change_default_SHELL/useradd.default (rev 0)
+++ debian/trunk/tests/usertools/02/useradd_change_default_SHELL/useradd.default 2008-01-12 15:18:12 UTC (rev 1710)
@@ -0,0 +1,43 @@
+# Default values for useradd(8)
+#
+# The SHELL variable specifies the default login shell on your
+# system.
+# Similar to DHSELL in adduser. However, we use "sh" here because
+# useradd is a low level utility and should be as general
+# as possible
+SHELL=/bin/foobar
+#
+# The default group for users
+# 100=users on Debian systems
+# Same as USERS_GID in adduser
+# This argument is used when the -n flag is specified.
+# The default behavior (when -n and -g are not specified) is to create a
+# primary user group with the same name as the user being added to the
+# system.
+# GROUP=100
+#
+# The default home directory. Same as DHOME for adduser
+# HOME=/home
+#
+# The number of days after a password expires until the account
+# is permanently disabled
+# INACTIVE=-1
+#
+# The default expire date
+# EXPIRE=
+#
+# The SKEL variable specifies the directory containing "skeletal" user
+# files; in other words, files such as a sample .profile that will be
+# copied to the new user's home directory when it is created.
+# SKEL=/etc/skel
+#
+# Defines whether the mail spool should be created while
+# creating the account
+# CREATE_MAIL_SPOOL=yes
+
+GROUP=100
+HOME=/home
+INACTIVE=-1
+EXPIRE=
+SKEL=/etc/skel
+CREATE_MAIL_SPOOL=no
Added: debian/trunk/tests/usertools/02/useradd_change_default_SHELL.test
===================================================================
--- debian/trunk/tests/usertools/02/useradd_change_default_SHELL.test (rev 0)
+++ debian/trunk/tests/usertools/02/useradd_change_default_SHELL.test 2008-01-12 15:18:12 UTC (rev 1710)
@@ -0,0 +1,30 @@
+#!/bin/sh
+
+set -e
+
+cd $(dirname $0)
+
+. ../../common/config.sh
+. ../../common/log.sh
+
+log_start "$0" "useradd -D: get default values"
+
+save_config
+
+# restore the files on exit
+trap 'log_status "$0" "FAILURE"; restore_config' 0
+
+change_config
+
+echo -n "Change default shell (useradd -D --shell /bin/foobar)..."
+useradd -D --shell /bin/foobar
+echo "OK"
+
+echo -n "Check the default values..."
+diff -au useradd_change_default_SHELL/useradd.default /etc/default/useradd
+echo "OK"
+
+log_status "$0" "SUCCESS"
+restore_config
+trap '' 0
+
Property changes on: debian/trunk/tests/usertools/02/useradd_change_default_SHELL.test
___________________________________________________________________
Name: svn:executable
+ *
Added: debian/trunk/tests/usertools/02/useradd_change_defaults/useradd.default
===================================================================
--- debian/trunk/tests/usertools/02/useradd_change_defaults/useradd.default (rev 0)
+++ debian/trunk/tests/usertools/02/useradd_change_defaults/useradd.default 2008-01-12 15:18:12 UTC (rev 1710)
@@ -0,0 +1,43 @@
+# Default values for useradd(8)
+#
+# The SHELL variable specifies the default login shell on your
+# system.
+# Similar to DHSELL in adduser. However, we use "sh" here because
+# useradd is a low level utility and should be as general
+# as possible
+SHELL=/usr/bin/foobar
+#
+# The default group for users
+# 100=users on Debian systems
+# Same as USERS_GID in adduser
+# This argument is used when the -n flag is specified.
+# The default behavior (when -n and -g are not specified) is to create a
+# primary user group with the same name as the user being added to the
+# system.
+# GROUP=100
+#
+# The default home directory. Same as DHOME for adduser
+# HOME=/home
+#
+# The number of days after a password expires until the account
+# is permanently disabled
+# INACTIVE=-1
+#
+# The default expire date
+# EXPIRE=
+#
+# The SKEL variable specifies the directory containing "skeletal" user
+# files; in other words, files such as a sample .profile that will be
+# copied to the new user's home directory when it is created.
+# SKEL=/etc/skel
+#
+# Defines whether the mail spool should be created while
+# creating the account
+# CREATE_MAIL_SPOOL=yes
+
+GROUP=1
+HOME=/var/tmp
+INACTIVE=12
+EXPIRE=1979-11-24
+SKEL=/etc/skel
+CREATE_MAIL_SPOOL=no
Added: debian/trunk/tests/usertools/02/useradd_change_defaults.test
===================================================================
--- debian/trunk/tests/usertools/02/useradd_change_defaults.test (rev 0)
+++ debian/trunk/tests/usertools/02/useradd_change_defaults.test 2008-01-12 15:18:12 UTC (rev 1710)
@@ -0,0 +1,30 @@
+#!/bin/sh
+
+set -e
+
+cd $(dirname $0)
+
+. ../../common/config.sh
+. ../../common/log.sh
+
+log_start "$0" "useradd -D: set all default values"
+
+save_config
+
+# restore the files on exit
+trap 'log_status "$0" "FAILURE"; restore_config' 0
+
+change_config
+
+echo -n "Change useradd defaults..."
+useradd -D -b /var/tmp -e 1979-11-24 -f 12 -g 1 -s /usr/bin/foobar
+echo "OK"
+
+echo -n "Check the default values..."
+diff -au useradd_change_defaults/useradd.default /etc/default/useradd
+echo "OK"
+
+log_status "$0" "SUCCESS"
+restore_config
+trap '' 0
+
Property changes on: debian/trunk/tests/usertools/02/useradd_change_defaults.test
___________________________________________________________________
Name: svn:executable
+ *
Added: debian/trunk/tests/usertools/02/useradd_default_default_values.test
===================================================================
--- debian/trunk/tests/usertools/02/useradd_default_default_values.test (rev 0)
+++ debian/trunk/tests/usertools/02/useradd_default_default_values.test 2008-01-12 15:18:12 UTC (rev 1710)
@@ -0,0 +1,34 @@
+#!/bin/sh
+
+set -e
+
+cd $(dirname $0)
+
+. ../../common/config.sh
+. ../../common/log.sh
+
+log_start "$0" "useradd -D: get default values"
+
+save_config
+
+# restore the files on exit
+trap 'log_status "$0" "FAILURE"; restore_config' 0
+
+change_config
+
+echo -n "Remove /etc/default/useradd..."
+rm -f /etc/default/useradd
+echo "OK"
+
+echo -n "Get default values: 'useradd -D > tmp/out'..."
+useradd -D > tmp/out
+echo "OK"
+
+echo -n "Check the default values..."
+diff -au data/useradd-D_default_values.out tmp/out
+echo "OK"
+
+log_status "$0" "SUCCESS"
+restore_config
+trap '' 0
+
Property changes on: debian/trunk/tests/usertools/02/useradd_default_default_values.test
___________________________________________________________________
Name: svn:executable
+ *
Added: debian/trunk/tests/usertools/02/useradd_get_default_values.test
===================================================================
--- debian/trunk/tests/usertools/02/useradd_get_default_values.test (rev 0)
+++ debian/trunk/tests/usertools/02/useradd_get_default_values.test 2008-01-12 15:18:12 UTC (rev 1710)
@@ -0,0 +1,30 @@
+#!/bin/sh
+
+set -e
+
+cd $(dirname $0)
+
+. ../../common/config.sh
+. ../../common/log.sh
+
+log_start "$0" "useradd -D: get default values"
+
+save_config
+
+# restore the files on exit
+trap 'log_status "$0" "FAILURE"; restore_config' 0
+
+change_config
+
+echo -n "Get default values: 'useradd -D > tmp/out'..."
+useradd -D > tmp/out
+echo "OK"
+
+echo -n "Check the default values..."
+diff -au data/useradd-D.out tmp/out
+echo "OK"
+
+log_status "$0" "SUCCESS"
+restore_config
+trap '' 0
+
Property changes on: debian/trunk/tests/usertools/02/useradd_get_default_values.test
___________________________________________________________________
Name: svn:executable
+ *
More information about the Pkg-shadow-commits
mailing list