[Pkg-systemd-maintainers] Bug#731887: systemd: Lid close on laptop doesn't suspend

[John Hughes]

On 12/11/2013 10:49 AM, Michael Biebl wrote:
> Have you booted with systemd being your PID 1 or do you still use 
> sysvinit? 
I'm a stick in the mud.

Ok, trying with init=/bin/systemd

It slept.

It woke up.

Log

[   94.784260] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
[   99.805757] PM: Syncing filesystems ... done.
[   99.832169] PM: Preparing system for mem sleep
[   99.832342] (NULL device *): firmware: agent loaded rtl_nic/rtl8168e-3.fw into memory
[   99.832381] (NULL device *): firmware: agent loaded intel-ucode/06-2a-07 into memory
[   99.832552] (NULL device *): firmware: agent loaded iwlwifi-6000g2b-6.ucode into memory
[   99.832565] Freezing user space processes ... (elapsed 0.001 seconds) done.
[   99.834087] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[   99.835218] PM: Entering mem sleep
[   99.835296] Suspending console(s) (use no_console_suspend to debug)
[   99.835472] wlan0: deauthenticating from c4:01:7c:09:c3:dc by local choice (reason=3)
[   99.869076] cfg80211: Calling CRDA to update world regulatory domain
[   99.869133] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[   99.869136] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[   99.869206] sd 0:0:0:0: [sda] Stopping disk
[   99.869208] sd 1:0:0:0: [sdb] Stopping disk
[   99.871180] option1 ttyUSB2: option_instat_callback: error -2
[   99.873325] option1 ttyUSB0: option_instat_callback: error -2
[  100.010881] mei_me 0000:00:16.0: suspend
[  100.190578] PM: suspend of devices complete after 354.688 msecs
[  100.190841] PM: late suspend of devices complete after 0.259 msecs
[  100.206599] xhci_hcd 0000:04:00.0: System wakeup enabled by ACPI
[  100.238715] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[  100.254929] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[  100.286614] PM: noirq suspend of devices complete after 95.654 msecs
[  100.287054] ACPI: Preparing to enter system sleep state S3
[  100.288342] PM: Saving platform NVS memory
[  100.289285] Disabling non-boot CPUs ...
[  100.291310] smpboot: CPU 1 is now offline
[  100.394701] smpboot: CPU 2 is now offline
[  100.396384] smpboot: CPU 3 is now offline
[  100.397700] ACPI: Low-level resume complete
[  100.397739] PM: Restoring platform NVS memory
[  100.398205] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
[  100.398222] Enabling non-boot CPUs ...
[  100.398290] smpboot: Booting Node 0 Processor 1 APIC 0x1
[  100.411582] Intel pstate controlling: cpu 1
[  100.411692] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x14
[  100.412223] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
[  100.412226] CPU1 is up
[  100.412279] smpboot: Booting Node 0 Processor 2 APIC 0x2
[  100.425567] Intel pstate controlling: cpu 2
[  100.425608] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x14
[  100.425899] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
[  100.425901] CPU2 is up
[  100.425957] smpboot: Booting Node 0 Processor 3 APIC 0x3
[  100.439241] Intel pstate controlling: cpu 3
[  100.439281] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
[  100.439284] CPU3 is up
[  100.442515] ACPI: Waking up from system sleep state S3
[  100.953070] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[  100.985093] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[  101.049194] xhci_hcd 0000:04:00.0: System wakeup disabled by ACPI
[  101.065335] PM: noirq resume of devices complete after 160.069 msecs
[  101.065564] PM: early resume of devices complete after 0.182 msecs
[  101.065606] i915 0000:00:02.0: setting latency timer to 64
[  101.065659] mei_me 0000:00:16.0: irq 49 for MSI/MSI-X
[  101.065761] ehci-pci 0000:00:1a.0: setting latency timer to 64
[  101.065822] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
[  101.065898] ahci 0000:00:1f.2: setting latency timer to 64
[  101.065936] ehci-pci 0000:00:1d.0: setting latency timer to 64
[  101.085256] [drm] Wrong MCH_SSKPD value: 0x16040307
[  101.085257] [drm] This can cause pipe underruns and display issues.
[  101.085257] [drm] Please upgrade your BIOS to fix this.
[  101.189316] tpm_tis 00:09: TPM is disabled/deactivated (0x7)
[  101.198926] r8169 0000:05:00.0 eth0: link down
[  101.389552] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  101.389582] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  101.391259] ata1.00: configured for UDMA/133
[  101.391329] sd 0:0:0:0: [sda] Starting disk
[  101.391545] ata2.00: configured for UDMA/133
[  101.391617] sd 1:0:0:0: [sdb] Starting disk
[  101.726840] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[  101.733758] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[  101.825859] PM: resume of devices complete after 759.365 msecs
[  101.826021] PM: Finishing wakeup.
[  101.826033] Restarting tasks ... done.
[  101.826834] video LNXVIDEO:09: Restoring backlight state
[  101.834875] cfg80211: World regulatory domain updated:
[  101.834879] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  101.834881] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  101.834883] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  101.834884] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  101.834886] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  101.834888] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  102.060113] wlan0: authenticate with c4:01:7c:09:c3:d8
[  102.064681] wlan0: send auth to c4:01:7c:09:c3:d8 (try 1/3)
[  102.121787] wlan0: authenticated
[  102.121918] wlan0: waiting for beacon from c4:01:7c:09:c3:d8
[  102.222520] wlan0: associate with c4:01:7c:09:c3:d8 (try 1/3)
[  102.226611] wlan0: RX AssocResp from c4:01:7c:09:c3:d8 (capab=0x431 status=0 aid=1)
[  102.229918] wlan0: associated
[  102.943385] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off