(forw) Bug#769728: [jessie daily 2014-11-15] installation-report: regression when deselecting the "standard system utilities" task
Christian PERRIER
bubulle at debian.org
Sun Nov 16 07:32:37 GMT 2014
Hello dear systemd packages maintainers,
I think this bug report is worth a look as this basically resumes to
"problems on system without packages of priority 'standard'". The
problems seems to be systemd-related bu I lack the experience to debug
this further....
----- Forwarded message from Karsten Merker <merker at debian.org> -----
Date: Sat, 15 Nov 2014 23:08:57 +0100
From: Karsten Merker <merker at debian.org>
To: submit at bugs.debian.org
Subject: Bug#769728: [jessie daily 2014-11-15] installation-report: regression when deselecting the "standard system utilities" task
Reply-To: Karsten Merker <merker at debian.org>, 769728 at bugs.debian.org
X-Mailing-List: <debian-boot at lists.debian.org> archive/latest/182105
X-CRM114-Status: Good ( pR: 999.99 )
Package: installation-reports
Boot method: netboot
Image version: http://d-i.debian.org/daily-images/armhf/daily/netboot/
dated 15-Nov-2014 05:25
Date: 2014-11-15
Machine: Cubietech Cubietruck
Processor: Allwinner A20 (2x Cortex A7)
Memory: 2GB
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [E]
Comments/Problems:
The installation itself works flawlessly, but when installing a
minimal system by deselecting "standard system utilities" in
tasksel, on booting the installed system the systemd error
message "[FAILED] Failed to start Login Service" gets shown
several times.
"systemctl status -l systemd-logind.service" results in:
-----8<----------8<----------8<----------8<----------8<----------8<-----
systemd-logind.service - Login Service
Loaded: loaded (/lib/systemd/system/systemd-logind.service; static)
Active: failed (Result: start-limit) since Sat 2014-11-15 22:21:56 CET; 1min 13s ago
Docs: man:systemd-logind.service(8)
man:logind.conf(5)
http://www.freedesktop.org/wiki/Software/systemd/logind
http://www.freedesktop.org/wiki/Software/systemd/multiseat
Process: 273 ExecStart=/lib/systemd/systemd-logind (code=exited, status=1/FAILURE)
Main PID: 273 (code=exited, status=1/FAILURE)
Status: "Shutting down..."
Nov 15 22:21:56 debian systemd[1]: Failed to start Login Service.
Nov 15 22:21:56 debian systemd[1]: Unit systemd-logind.service entered failed state.
Nov 15 22:21:56 debian systemd[1]: systemd-logind.service has no holdoff time, scheduling restart.
Nov 15 22:21:56 debian systemd[1]: Stopping Login Service...
Nov 15 22:21:56 debian systemd[1]: Starting Login Service...
Nov 15 22:21:56 debian systemd[1]: systemd-logind.service start request repeated too quickly, refusing to start.
Nov 15 22:21:56 debian systemd[1]: Failed to start Login Service.
Nov 15 22:21:56 debian systemd[1]: Unit systemd-logind.service entered failed state.
-----8<----------8<----------8<----------8<----------8<----------8<-----
When "standard system utilities" is selected in tasksel, the
problem does not occur. Deselecting "standard system utilities"
did not have any negatve effect on the boot process when d-i
still installed SysV-init as the default init system, so this is
a regression.
Following is a full boot log of an installation with "standard
system utilities" deselected in tasksel:
-----8<----------8<----------8<----------8<----------8<----------8<-----
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-armmp-lpae (debian-kernel at lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-13) ) #1 SMP Debian 3.16.7-2 (2014-11-06)
[ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=30c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Cubietech Cubietruck
[ 0.000000] Forcing write-allocate cache policy for SMP
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
[ 0.000000] PERCPU: Embedded 9 pages/cpu @ee7cc000 s13248 r8192 d15424 u36864
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768
[ 0.000000] Kernel command line: console=ttyS0,115200 console=ttyS0,115200
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 2057220K/2097152K available (6558K kernel code, 837K rwdata, 2208K rodata, 700K init, 396K bss, 39932K reserved, 1318912K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0897da0 (8768 kB)
[ 0.000000] .init : 0xc0898000 - 0xc09473c0 ( 701 kB)
[ 0.000000] .data : 0xc0948000 - 0xc0a197f8 ( 838 kB)
[ 0.000000] .bss : 0xc0a197f8 - 0xc0a7cbf4 ( 397 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000009] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
[ 0.000017] Switching to timer-based delay loop
[ 0.001005] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
[ 0.001361] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 26843545593ns
[ 0.001808] Console: colour dummy device 80x30
[ 0.001844] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.001860] pid_max: default: 32768 minimum: 301
[ 0.001991] Security Framework initialized
[ 0.002062] AppArmor: AppArmor disabled by boot time parameter
[ 0.002073] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.002160] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002173] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.003157] Initializing cgroup subsys memory
[ 0.003197] Initializing cgroup subsys devices
[ 0.003236] Initializing cgroup subsys freezer
[ 0.003256] Initializing cgroup subsys net_cls
[ 0.003291] Initializing cgroup subsys blkio
[ 0.003315] Initializing cgroup subsys perf_event
[ 0.003331] Initializing cgroup subsys net_prio
[ 0.003419] CPU: Testing write buffer coherency: ok
[ 0.003467] ftrace: allocating 23529 entries in 70 pages
[ 0.039301] /cpus/cpu at 0 missing clock-frequency property
[ 0.039338] /cpus/cpu at 1 missing clock-frequency property
[ 0.039352] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.039588] Setting up static identity map for 0x405e50d8 - 0x405e5130
[ 0.049093] CPU1: Booted secondary processor
[ 0.049150] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.049264] Brought up 2 CPUs
[ 0.049288] SMP: Total of 2 processors activated.
[ 0.049294] CPU: All CPU(s) started in HYP mode.
[ 0.049300] CPU: Virtualization extensions available.
[ 0.050039] devtmpfs: initialized
[ 0.054464] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
[ 0.060369] pinctrl core: initialized pinctrl subsystem
[ 0.060902] regulator-dummy: no parameters
[ 0.066847] NET: Registered protocol family 16
[ 0.067263] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.075316] No ATAGs?
[ 0.075373] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.075386] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.075558] EXYNOS: PMU not supported
[ 0.076538] Serial: AMBA PL011 UART driver
[ 0.094798] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot
[ 0.094829] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
[ 0.095350] reg-fixed-voltage ahci-5v: could not find pctldev for node /soc at 01c00000/pinctrl at 01c20800/ahci_pwr_pin at 1, deferring probe
[ 0.095372] platform ahci-5v: Driver reg-fixed-voltage requests probe deferral
[ 0.095397] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc at 01c00000/pinctrl at 01c20800/usb1_vbus_pin at 0, deferring probe
[ 0.095411] platform usb1-vbus: Driver reg-fixed-voltage requests probe deferral
[ 0.095433] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc at 01c00000/pinctrl at 01c20800/usb2_vbus_pin at 0, deferring probe
[ 0.095445] platform usb2-vbus: Driver reg-fixed-voltage requests probe deferral
[ 0.095672] vcc3v0: 3000 mV
[ 0.095941] vcc3v3: 3300 mV
[ 0.096038] reg-fixed-voltage vmmc3: could not find pctldev for node /soc at 01c00000/pinctrl at 01c20800/vmmc3_pin at 0, deferring probe
[ 0.096054] platform vmmc3: Driver reg-fixed-voltage requests probe deferral
[ 0.097249] vgaarb: loaded
[ 0.097798] usbcore: registered new interface driver usbfs
[ 0.097876] usbcore: registered new interface driver hub
[ 0.098096] usbcore: registered new device driver usb
[ 0.098785] media: Linux media interface: v0.10
[ 0.098853] Linux video capture interface: v2.00
[ 0.098959] pps_core: LinuxPPS API ver. 1 registered
[ 0.098967] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti at linux.it>
[ 0.098997] PTP clock support registered
[ 0.100664] Switched to clocksource arch_sys_counter
[ 0.151797] NET: Registered protocol family 2
[ 0.153115] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.153209] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.153330] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.153419] TCP: reno registered
[ 0.153434] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.153494] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.153837] NET: Registered protocol family 1
[ 0.154460] Unpacking initramfs...
[ 1.113262] Freeing initrd memory: 11804K (cf478000 - cffff000)
[ 1.113798] kvm [1]: interrupt-controller at 1c84000 IRQ25
[ 1.114115] kvm [1]: timer IRQ27
[ 1.114142] kvm [1]: Hyp mode initialized successfully
[ 1.114823] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
[ 1.116925] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 1.117101] audit: initializing netlink subsys (disabled)
[ 1.117213] audit: type=2000 audit(1.104:1): initialized
[ 1.118466] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.118559] zbud: loaded
[ 1.118983] VFS: Disk quotas dquot_6.5.2
[ 1.119055] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.119324] msgmni has been set to 1465
[ 1.121169] alg: No test for stdrng (krng)
[ 1.121314] bounce: pool size: 64 pages
[ 1.121426] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.121665] io scheduler noop registered
[ 1.121685] io scheduler deadline registered
[ 1.121851] io scheduler cfq registered (default)
[ 1.125208] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[ 1.127466] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.129691] console [ttyS0] disabled
[ 1.149883] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A
[ 1.911290] console [ttyS0] enabled
[ 1.915269] Serial: AMBA driver
[ 1.918779] Serial: IMX driver
[ 1.925734] mousedev: PS/2 mouse device common for all mice
[ 1.932901] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0
[ 1.939719] sunxi-rtc 1c20d00.rtc: RTC enabled
[ 1.945343] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.951472] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.957579] usbcore: registered new interface driver usbhid
[ 1.963170] usbhid: USB HID core driver
[ 1.967720] TCP: cubic registered
[ 1.971170] NET: Registered protocol family 10
[ 1.976862] mip6: Mobile IPv6
[ 1.979857] NET: Registered protocol family 17
[ 1.984361] mpls_gso: MPLS GSO support
[ 1.988225] ThumbEE CPU extension supported.
[ 1.992534] Registering SWP/SWPB emulation handler
[ 1.998156] registered taskstats version 1
[ 2.003464] ahci-5v: 5000 mV
[ 2.007002] usb1-vbus: 5000 mV
[ 2.010625] usb2-vbus: 5000 mV
[ 2.014204] vmmc3: 3300 mV
[ 2.017411] sunxi-rtc 1c20d00.rtc: setting system clock to 2014-11-15 21:21:45 UTC (1416086505)
[ 2.030987] vmmc3: disabling
[ 2.033955] usb2-vbus: disabling
[ 2.037200] usb1-vbus: disabling
[ 2.040426] ahci-5v: disabling
[ 2.043495] vcc3v3: disabling
[ 2.046472] vcc3v0: disabling
[ 2.050723] Freeing unused kernel memory: 700K (c0898000 - c0947000)
Loading, please wait...
[ 2.130514] systemd-udevd[61]: starting version 215
[ 2.138139] random: systemd-udevd urandom read with 0 bits of entropy available
[ 2.190693] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found
[ 2.202494] sunxi-mmc 1c0f000.mmc: Got CD GPIO #225.
[ 2.210381] SCSI subsystem initialized
[ 2.236806] sunxi-mmc 1c0f000.mmc: base:0xf010a000 irq:64
[ 2.242905] sunxi-mmc 1c12000.mmc: No vqmmc regulator found
[ 2.284554] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 2.294443] sunxi-mmc 1c12000.mmc: base:0xf018e000 irq:67
[ 2.314093] mmc0: new high speed SDHC card at address 59b4
[ 2.344853] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
[ 2.352448] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1
[ 2.363885] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[ 2.372910] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc
[ 2.380811] mmcblk0: mmc0:59b4 NCard 14.7 GiB
[ 2.386968] scsi0 : ahci_platform
[ 2.387686] mmcblk0: p1 p2 p3 < p5 >
[ 2.394792] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
[ 2.403432] stmmaceth 1c50000.ethernet: no regulator found
[ 2.409272] stmmaceth 1c50000.ethernet: no reset control found
[ 2.409960] sunxi-mmc 1c12000.mmc: smc 1 err, cmd 8, RTO !!
[ 2.420538] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 2.422093] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2.423645] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2.426440] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 2.442333] mmc1: new high speed SDIO card at address 0001
[ 2.448194] Ring mode enabled
[ 2.451293] No HW DMA feature register supported
[ 2.455841] Normal descriptors
[ 2.459183] TX Checksum insertion supported
[ 2.487734] libphy: stmmac: probed
[ 2.491288] eth0: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[ 2.497690] eth0: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[ 4.512709] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.520134] ata1.00: ATA-8: HGST HTS541010A9E680, JA0OA560, max UDMA/133
[ 4.526859] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 4.535024] ata1.00: configured for UDMA/133
[ 4.539862] scsi 0:0:0:0: Direct-Access ATA HGST HTS541010A9 A560 PQ: 0 ANSI: 5
[ 4.562835] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 4.570606] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 4.576468] sd 0:0:0:0: [sda] Write Protect is off
[ 4.581545] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.636264] sda: sda1 sda2 sda3 < sda5 >
[ 4.642707] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.650078] sd 0:0:0:0: Attached scsi generic sg0 type 0
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... [ 5.097740] PM: Starting manual resume from disk
done.
[ 5.421805] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
[ 6.218219] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 6.232143] systemd[1]: Detected architecture 'arm'.
Welcome to Debian GNU/Linux jessie/sid!
[ 6.386964] random: nonblocking pool is initialized
[ 6.406046] systemd[1]: Inserted module 'autofs4'
[ 6.417033] systemd[1]: Set hostname to <debian>.
[ 7.236744] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[ 7.249780] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 7.266925] systemd[1]: Expecting device dev-ttyS0.device...
Expecting device dev-ttyS0.device...
[ 7.280938] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 7.289214] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.296921] systemd[1]: Starting Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems (Pre).
[ 7.308863] systemd[1]: Reached target Remote File Systems (Pre).
[ 7.315137] systemd[1]: Starting Encrypted Volumes.
[ OK ] Reached target Encrypted Volumes.
[ 7.328815] systemd[1]: Reached target Encrypted Volumes.
[ 7.334490] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ OK ] Set up automount Arbitrary Executable File Formats F...utomount Point.
[ 7.356834] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.366457] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 7.374816] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 7.382881] systemd[1]: Starting Paths.
[ OK ] Reached target Paths.
[ 7.396823] systemd[1]: Reached target Paths.
[ 7.401335] systemd[1]: Expecting device dev-disk-by\x2duuid-52b96dcb\x2d780b\x2d4d2e\x2d824a\x2d11a17a16320e.device...
Expecting device dev-disk-by\x2duuid-52b96dcb\x2d780...6320e.device...
[ 7.424835] systemd[1]: Expecting device dev-disk-by\x2duuid-3996f34e\x2d17b8\x2d42da\x2da5ae\x2d69c90a1073fb.device...
Expecting device dev-disk-by\x2duuid-3996f34e\x2d17b...073fb.device...
[ 7.448816] systemd[1]: Starting Root Slice.
[ OK ] Created slice Root Slice.
[ 7.488926] systemd[1]: Created slice Root Slice.
[ 7.493827] systemd[1]: Starting User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 7.508871] systemd[1]: Created slice User and Session Slice.
[ 7.514787] systemd[1]: Starting Delayed Shutdown Socket.
[ OK ] Listening on Delayed Shutdown Socket.
[ 7.528834] systemd[1]: Listening on Delayed Shutdown Socket.
[ 7.534739] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ 7.548830] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 7.555940] systemd[1]: Starting Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 7.568829] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.574904] systemd[1]: Starting Syslog Socket.
[ OK ] Listening on Syslog Socket.
[ 7.588816] systemd[1]: Listening on Syslog Socket.
[ 7.593887] systemd[1]: Starting udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 7.608815] systemd[1]: Listening on udev Kernel Socket.
[ 7.614312] systemd[1]: Starting udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 7.628817] systemd[1]: Listening on udev Control Socket.
[ 7.634391] systemd[1]: Starting Journal Socket.
[ OK ] Listening on Journal Socket.
[ 7.648824] systemd[1]: Listening on Journal Socket.
[ 7.654002] systemd[1]: Starting Sockets.
[ OK ] Reached target Sockets.
[ 7.664808] systemd[1]: Reached target Sockets.
[ 7.669503] systemd[1]: Starting System Slice.
[ OK ] Created slice System Slice.
[ 7.684863] systemd[1]: Created slice System Slice.
[ 7.689977] systemd[1]: Starting File System Check on Root Device...
Starting File System Check on Root Device...
[ 7.707893] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ OK ] Created slice system-systemd\x2dfsck.slice.
[ 7.724898] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 7.731421] systemd[1]: Starting system-getty.slice.
[ OK ] Created slice system-getty.slice.
[ 7.744876] systemd[1]: Created slice system-getty.slice.
[ 7.750666] systemd[1]: Starting system-serial\x2dgetty.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ 7.764892] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 7.820172] systemd[1]: Started Set Up Additional Binary Formats.
[ 7.827178] systemd[1]: Starting Create list of required static device nodes for the current kernel...
Starting Create list of required static device nodes...rrent ker[ 7.840397] systemd[1]: Mounting Debug File System...
nel...
Mounting Debug File System...
[ 7.859576] systemd[1]: Starting Load Kernel Modules...
Starting Load Kernel Modules...
[ 7.868811] systemd[1]: Mounting Huge Pages File System...
Mounting Huge Pages File System...[ 7.877825] systemd[1]: Mounting POSIX Message Queue File System...
Mounting POSIX Message Queue File System...
[ 7.888019] systemd[1]: Starting udev Coldplug all Devices...
Starting udev Coldplug all Devices...[ 7.898934] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ OK [ 7.909632] systemd[1]: Started Journal Service.
] Started Journal Service.
[ OK ] Reached target Slices.
[ OK ] Started Create list of required static device nodes ...current kernel.
Starting Create Static Device Nodes in /dev...
[ OK ] Started Load Kernel Modules.
Starting Apply Kernel Variables...
[ OK ] Started udev Coldplug all Devices.
[ OK ] Started Apply Kernel Variables.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Mounted Debug File System.
[ OK ] Mounted Huge Pages File System.
[ OK ] Started Create Static Device Nodes in /dev.
Starting udev Kernel Device Manager...
[ 8.800366] systemd-udevd[152]: starting version 215
[ OK ] Started udev Kernel Device Manager.
Starting Copy rules generated while the root was ro...
[ OK ] Started Copy rules generated while the root was ro.
[ 9.100228] systemd-fsck[129]: /dev/sda2: clean, 16668/60653568 files, 3971521/242612480 blocks
[ OK ] Started File System Check on Root Device.
Starting Remount Root and Kernel File Systems...
[ 9.238925] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ OK ] Started Remount Root and Kernel File Systems.
Starting Load/Save Random Seed...
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Started Load/Save Random Seed.
[ OK ] Found device /dev/ttyS0.
[ 9.557689] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 9.617627] ehci-platform: EHCI generic platform driver
[ 9.624930] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[ 9.634803] ehci-platform 1c14000.usb: EHCI Host Controller
[ 9.646583] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
[ 9.657603] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 9.662383] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000
[ 9.672806] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
[ 9.685462] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 9.692391] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.699727] usb usb1: Product: EHCI Host Controller
[ 9.704673] usb usb1: Manufacturer: Linux 3.16.0-4-armmp-lpae ehci_hcd
[ 9.711266] usb usb1: SerialNumber: 1c14000.usb
[ 9.716994] hub 1-0:1.0: USB hub found
[ 9.721809] ohci-platform: OHCI generic platform driver
[ 9.727514] hub 1-0:1.0: 1 port detected
[ 9.732731] ehci-platform 1c1c000.usb: EHCI Host Controller
[ 9.738878] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
[ 9.746959] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000
[ 9.764798] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[ 9.771669] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 9.778631] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.785928] usb usb2: Product: EHCI Host Controller
[ 9.790881] usb usb2: Manufacturer: Linux 3.16.0-4-armmp-lpae ehci_hcd
[ 9.797466] usb usb2: SerialNumber: 1c1c000.usb
[ 9.806399] hub 2-0:1.0: USB hub found
[ 9.810352] hub 2-0:1.0: 1 port detected
[ 9.817366] ohci-platform 1c14400.usb: Generic Platform OHCI controller
[ 9.830258] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3
[ 9.847206] cfg80211: Calling CRDA to update world regulatory domain
[ 9.854531] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400
[ OK ] Found device HGST_HTS541010A9E680 1.
Starting File System Check on /dev/disk/by-uuid/3996...69c90a107[ 9.925113] usb usb3: New USB device found, idVendor=1d6b, idProduct=00013fb...
[ 9.934981] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.943071] usb usb3: Product: Generic Platform OHCI controller
[ 9.949072] usb usb3: Manufacturer: Linux 3.16.0-4-armmp-lpae ohci_hcd
[ 9.955649] usb usb3: SerialNumber: 1c14400.usb
[ 9.975849] hub 3-0:1.0: USB hub found
[ 10.016237] brcmfmac_sdio mmc1:0001:1: firmware: failed to load brcm/brcmfmac43362-sdio.bin (-2)
[ 10.031594] hub 3-0:1.0: 1 port detected
[ 10.051973] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
[ 10.065219] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4
[ 10.097018] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400
[ 10.161021] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.167902] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.175177] usb usb4: Product: Generic Platform OHCI controller
[ 10.181136] usb usb4: Manufacturer: Linux 3.16.0-4-armmp-lpae ohci_hcd
[ 10.187767] usb usb4: SerialNumber: 1c1c400.usb
[ 10.193472] hub 4-0:1.0: USB hub found
[ 10.197410] hub 4-0:1.0: 1 port detected
[ 10.247743] systemd-fsck[179]: /dev/sda1: clean, 22/62248 files, 27557/248832 blocks
[ OK ] Started File System Check on /dev/disk/by-uuid/3996f...e-69c90a1073fb.
Mounting /boot...
[ OK ] Found device HGST_HTS541010A9E680 5.
Activating swap /dev/disk/by-uuid/52b96dcb-780b-4d2e...11a17a16320e...
[ 10.641876] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ OK ] Created slice system-ifup.slice.
[ 10.683594] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ OK ] Mounted /boot.
[ OK ] Reached target Local File Systems.
Starting Create Volatile Files and Directories...
[ OK ] Reached target Remote File Systems.
Starting Trigger Flushing of Journal to Persistent Storage...
[ 10.775115] Adding 6061052k swap on /dev/sda5. Priority:-1 extents:1 across:6061052k FS
Starting LSB: Raise network interfaces....
[ OK ] Activated swap /dev/disk/by-uuid/52b96dcb-780b-4d2e-824a-11a17a16320e.
[ 10.846476] systemd-journald[139]: Received request to flush runtime journal from PID 1
[ OK ] Started Trigger Flushing of Journal to Persistent Storage.
[ OK ] Reached target Swap.
[ OK ] Started Create Volatile Files and Directories.
Starting Update UTMP about System Boot/Shutdown...
[ 11.073175] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Started LSB: Raise network interfaces..
Starting ifup for eth0...
[ OK ] Started ifup for eth0.
[ OK ] Reached target Network.
[ OK ] Reached target System Initialization.
[ OK ] Reached target Timers.
[ OK ] Reached target Basic System.
Starting Regular background program processing daemon...
[ OK ] Started Regular background program processing daemon.
Starting /etc/rc.local Compatibility...
Starting Login Service...
Starting System Logging Service...
Starting Permit User Sessions...
[ OK ] Started /etc/rc.local Compatibility.
[ OK ] Started Permit User Sessions.
Starting Getty on tty1...
[ OK ] Started Getty on tty1.
[ 12.088819] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
Starting Serial Getty on ttyS0...
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Reached target Login Prompts.
[FAILED] Failed to start Login Service.
See 'systemctl status systemd-logind.service' for details.
[ 12.245325] No MAC Management Counters available
Stopping Login Service...
[ OK ] Stopped Login Service.
Starting Login Service...
[FAILED] Failed to start Login Service.
See 'systemctl status systemd-logind.service' for details.
Stopping Login Service...
[ OK ] Stopped Login Service.
Starting Login Service...
[ OK ] Started System Logging Service.
[FAILED] Failed to start Login Service.
See 'systemctl status systemd-logind.service' for details.
Stopping Login Service...
[ OK ] Stopped Login Service.
Starting Login Service...
[FAILED] Failed to start Login Service.
See 'systemctl status systemd-logind.service' for details.
Stopping Login Service...
[ OK ] Stopped Login Service.
Starting Login Service...
[FAILED] Failed to start Login Service.
See 'systemctl status systemd-logind.service' for details.
Stopping Login Service...
[ OK ] Stopped Login Service.
Starting Login Service...
[FAILED] Failed to start Login Service.
See 'systemctl status systemd-logind.service' for details.
[ OK ] Reached target Multi-User System.
[ OK ] Reached target Graphical Interface.
Starting Update UTMP about System Runlevel Changes...
[ OK ] Started Update UTMP about System Runlevel Changes.
[ 14.233023] stmmaceth 1c50000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
Debian GNU/Linux jessie/sid debian ttyS0
debian login:
-----8<----------8<----------8<----------8<----------8<----------8<-----
For comparison purposes a boot log with "standard system
utilities" selected in tasksel:
-----8<----------8<----------8<----------8<----------8<----------8<-----
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-armmp-lpae (debian-kernel at lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-13) ) #1 SMP Debian 3.16.7-2 (2014-11-06)
[ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=30c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Cubietech Cubietruck
[ 0.000000] Forcing write-allocate cache policy for SMP
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
[ 0.000000] PERCPU: Embedded 9 pages/cpu @ee7cc000 s13248 r8192 d15424 u36864
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768
[ 0.000000] Kernel command line: console=ttyS0,115200 console=ttyS0,115200
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 2057216K/2097152K available (6558K kernel code, 837K rwdata, 2208K rodata, 700K init, 396K bss, 39936K reserved, 1318912K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0897da0 (8768 kB)
[ 0.000000] .init : 0xc0898000 - 0xc09473c0 ( 701 kB)
[ 0.000000] .data : 0xc0948000 - 0xc0a197f8 ( 838 kB)
[ 0.000000] .bss : 0xc0a197f8 - 0xc0a7cbf4 ( 397 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000009] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
[ 0.000017] Switching to timer-based delay loop
[ 0.001009] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
[ 0.001365] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 26843545593ns
[ 0.001821] Console: colour dummy device 80x30
[ 0.001859] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.001874] pid_max: default: 32768 minimum: 301
[ 0.002004] Security Framework initialized
[ 0.002076] AppArmor: AppArmor disabled by boot time parameter
[ 0.002086] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.002173] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002186] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.003166] Initializing cgroup subsys memory
[ 0.003204] Initializing cgroup subsys devices
[ 0.003242] Initializing cgroup subsys freezer
[ 0.003261] Initializing cgroup subsys net_cls
[ 0.003293] Initializing cgroup subsys blkio
[ 0.003317] Initializing cgroup subsys perf_event
[ 0.003332] Initializing cgroup subsys net_prio
[ 0.003422] CPU: Testing write buffer coherency: ok
[ 0.003472] ftrace: allocating 23529 entries in 70 pages
[ 0.039313] /cpus/cpu at 0 missing clock-frequency property
[ 0.039348] /cpus/cpu at 1 missing clock-frequency property
[ 0.039363] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.039600] Setting up static identity map for 0x405e50d8 - 0x405e5130
[ 0.049137] CPU1: Booted secondary processor
[ 0.049194] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.049327] Brought up 2 CPUs
[ 0.049350] SMP: Total of 2 processors activated.
[ 0.049357] CPU: All CPU(s) started in HYP mode.
[ 0.049362] CPU: Virtualization extensions available.
[ 0.050097] devtmpfs: initialized
[ 0.054533] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
[ 0.060438] pinctrl core: initialized pinctrl subsystem
[ 0.060966] regulator-dummy: no parameters
[ 0.066923] NET: Registered protocol family 16
[ 0.067339] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.075395] No ATAGs?
[ 0.075451] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.075465] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.075627] EXYNOS: PMU not supported
[ 0.076605] Serial: AMBA PL011 UART driver
[ 0.094758] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot
[ 0.094791] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
[ 0.095243] reg-fixed-voltage ahci-5v: could not find pctldev for node /soc at 01c00000/pinctrl at 01c20800/ahci_pwr_pin at 1, deferring probe
[ 0.095263] platform ahci-5v: Driver reg-fixed-voltage requests probe deferral
[ 0.095362] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc at 01c00000/pinctrl at 01c20800/usb1_vbus_pin at 0, deferring probe
[ 0.095378] platform usb1-vbus: Driver reg-fixed-voltage requests probe deferral
[ 0.095402] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc at 01c00000/pinctrl at 01c20800/usb2_vbus_pin at 0, deferring probe
[ 0.095415] platform usb2-vbus: Driver reg-fixed-voltage requests probe deferral
[ 0.095640] vcc3v0: 3000 mV
[ 0.095917] vcc3v3: 3300 mV
[ 0.096015] reg-fixed-voltage vmmc3: could not find pctldev for node /soc at 01c00000/pinctrl at 01c20800/vmmc3_pin at 0, deferring probe
[ 0.096031] platform vmmc3: Driver reg-fixed-voltage requests probe deferral
[ 0.097239] vgaarb: loaded
[ 0.097781] usbcore: registered new interface driver usbfs
[ 0.097859] usbcore: registered new interface driver hub
[ 0.098105] usbcore: registered new device driver usb
[ 0.098791] media: Linux media interface: v0.10
[ 0.098862] Linux video capture interface: v2.00
[ 0.098969] pps_core: LinuxPPS API ver. 1 registered
[ 0.098976] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti at linux.it>
[ 0.099006] PTP clock support registered
[ 0.100648] Switched to clocksource arch_sys_counter
[ 0.151850] NET: Registered protocol family 2
[ 0.153182] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.153275] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.153396] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.153482] TCP: reno registered
[ 0.153498] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.153557] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.153895] NET: Registered protocol family 1
[ 0.154514] Unpacking initramfs...
[ 1.112722] Freeing initrd memory: 11808K (cf477000 - cffff000)
[ 1.113321] kvm [1]: interrupt-controller at 1c84000 IRQ25
[ 1.113656] kvm [1]: timer IRQ27
[ 1.113684] kvm [1]: Hyp mode initialized successfully
[ 1.114363] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
[ 1.116306] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 1.116467] audit: initializing netlink subsys (disabled)
[ 1.116577] audit: type=2000 audit(1.100:1): initialized
[ 1.118007] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.118101] zbud: loaded
[ 1.118521] VFS: Disk quotas dquot_6.5.2
[ 1.118593] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.118858] msgmni has been set to 1465
[ 1.120732] alg: No test for stdrng (krng)
[ 1.120886] bounce: pool size: 64 pages
[ 1.121002] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.121252] io scheduler noop registered
[ 1.121271] io scheduler deadline registered
[ 1.121433] io scheduler cfq registered (default)
[ 1.124796] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[ 1.127067] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.129218] console [ttyS0] disabled
[ 1.149409] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A
[ 1.910653] console [ttyS0] enabled
[ 1.914623] Serial: AMBA driver
[ 1.918133] Serial: IMX driver
[ 1.925144] mousedev: PS/2 mouse device common for all mice
[ 1.932258] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0
[ 1.939087] sunxi-rtc 1c20d00.rtc: RTC enabled
[ 1.944691] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.950806] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.956923] usbcore: registered new interface driver usbhid
[ 1.962505] usbhid: USB HID core driver
[ 1.967054] TCP: cubic registered
[ 1.970495] NET: Registered protocol family 10
[ 1.976051] mip6: Mobile IPv6
[ 1.979090] NET: Registered protocol family 17
[ 1.983581] mpls_gso: MPLS GSO support
[ 1.987442] ThumbEE CPU extension supported.
[ 1.991746] Registering SWP/SWPB emulation handler
[ 1.997390] registered taskstats version 1
[ 2.002656] ahci-5v: 5000 mV
[ 2.006190] usb1-vbus: 5000 mV
[ 2.009823] usb2-vbus: 5000 mV
[ 2.013396] vmmc3: 3300 mV
[ 2.016587] sunxi-rtc 1c20d00.rtc: setting system clock to 2014-11-15 20:49:41 UTC (1416084581)
[ 2.030211] vmmc3: disabling
[ 2.033165] usb2-vbus: disabling
[ 2.036393] usb1-vbus: disabling
[ 2.039637] ahci-5v: disabling
[ 2.042703] vcc3v3: disabling
[ 2.045680] vcc3v0: disabling
[ 2.049916] Freeing unused kernel memory: 700K (c0898000 - c0947000)
Loading, please wait...
[ 2.130172] systemd-udevd[61]: starting version 215
[ 2.137907] random: systemd-udevd urandom read with 0 bits of entropy available
[ 2.190937] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found
[ 2.203566] SCSI subsystem initialized
[ 2.218607] sunxi-mmc 1c0f000.mmc: Got CD GPIO #225.
[ 2.252754] sunxi-mmc 1c0f000.mmc: base:0xf010a000 irq:64
[ 2.258930] sunxi-mmc 1c12000.mmc: No vqmmc regulator found
[ 2.300791] sunxi-mmc 1c12000.mmc: base:0xf018e000 irq:67
[ 2.314078] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 2.327520] mmc0: new high speed SDHC card at address 59b4
[ 2.338047] mmcblk0: mmc0:59b4 NCard 14.7 GiB
[ 2.348842] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
[ 2.351284] mmcblk0: p1 p2 p3 < p5 >
[ 2.358907] sunxi-mmc 1c12000.mmc: smc 1 err, cmd 8, RTO !!
[ 2.365612] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1
[ 2.368231] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 2.373610] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2.376998] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2.381646] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 2.393663] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[ 2.398559] mmc1: new high speed SDIO card at address 0001
[ 2.408179] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc
[ 2.417638] scsi0 : ahci_platform
[ 2.421509] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
[ 2.430062] stmmaceth 1c50000.ethernet: no regulator found
[ 2.436415] stmmaceth 1c50000.ethernet: no reset control found
[ 2.442297] Ring mode enabled
[ 2.445372] No HW DMA feature register supported
[ 2.449911] Normal descriptors
[ 2.453245] TX Checksum insertion supported
[ 2.481198] libphy: stmmac: probed
[ 2.484628] eth0: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[ 2.491094] eth0: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[ 4.544695] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.552115] ata1.00: ATA-8: HGST HTS541010A9E680, JA0OA560, max UDMA/133
[ 4.558841] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 4.567020] ata1.00: configured for UDMA/133
[ 4.571857] scsi 0:0:0:0: Direct-Access ATA HGST HTS541010A9 A560 PQ: 0 ANSI: 5
[ 4.593706] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 4.601468] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 4.607860] sd 0:0:0:0: [sda] Write Protect is off
[ 4.612841] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.671345] sda: sda1 sda2 sda3 < sda5 >
[ 4.678633] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.686885] sd 0:0:0:0: Attached scsi generic sg0 type 0
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... [ 5.221601] PM: Starting manual resume from disk
done.
[ 5.545664] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
[ 6.153349] random: nonblocking pool is initialized
[ 6.363576] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 6.377529] systemd[1]: Detected architecture 'arm'.
Welcome to Debian GNU/Linux jessie/sid!
[ 6.610026] systemd[1]: Inserted module 'autofs4'
[ 6.633188] systemd[1]: Set hostname to <debian>.
[ 7.519898] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 7.537719] systemd[1]: Expecting device dev-ttyS0.device...
Expecting device dev-ttyS0.device...
[ 7.548880] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 7.557156] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.564920] systemd[1]: Starting Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems (Pre).
[ 7.576812] systemd[1]: Reached target Remote File Systems (Pre).
[ 7.583132] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 7.591486] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 7.599544] systemd[1]: Starting Paths.
[ OK ] Reached target Paths.
[ 7.612804] systemd[1]: Reached target Paths.
[ 7.617411] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ OK ] Set up automount Arbitrary Executable File Formats F...utomount Point.
[ 7.640812] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.650383] systemd[1]: Starting Encrypted Volumes.
[ OK ] Reached target Encrypted Volumes.
[ 7.664775] systemd[1]: Reached target Encrypted Volumes.
[ 7.670328] systemd[1]: Expecting device dev-disk-by\x2duuid-2af38901\x2d2d58\x2d4843\x2dacc1\x2dabb7ee7bd8c5.device...
Expecting device dev-disk-by\x2duuid-2af38901\x2d2d5...bd8c5.device...
[ 7.692809] systemd[1]: Expecting device dev-disk-by\x2duuid-f4bf8f18\x2d8804\x2d4698\x2da0f3\x2d54bc7705c6bb.device...
Expecting device dev-disk-by\x2duuid-f4bf8f18\x2d880...5c6bb.device...
[ 7.716788] systemd[1]: Starting Root Slice.
[ OK ] Created slice Root Slice.
[ 7.756861] systemd[1]: Created slice Root Slice.
[ 7.761757] systemd[1]: Starting User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 7.776848] systemd[1]: Created slice User and Session Slice.
[ 7.782757] systemd[1]: Starting Delayed Shutdown Socket.
[ OK ] Listening on Delayed Shutdown Socket.
[ 7.796819] systemd[1]: Listening on Delayed Shutdown Socket.
[ 7.802719] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ 7.816809] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 7.823919] systemd[1]: Starting Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 7.836807] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.842872] systemd[1]: Starting Syslog Socket.
[ OK ] Listening on Syslog Socket.
[ 7.856803] systemd[1]: Listening on Syslog Socket.
[ 7.861874] systemd[1]: Starting udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 7.872790] systemd[1]: Listening on udev Kernel Socket.
[ 7.878272] systemd[1]: Starting udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 7.892797] systemd[1]: Listening on udev Control Socket.
[ 7.898374] systemd[1]: Starting Journal Socket.
[ OK ] Listening on Journal Socket.
[ 7.912806] systemd[1]: Listening on Journal Socket.
[ 7.918010] systemd[1]: Starting System Slice.
[ OK ] Created slice System Slice.
[ 7.932851] systemd[1]: Created slice System Slice.
[ 7.937976] systemd[1]: Starting File System Check on Root Device...
Starting File System Check on Root Device...
[ 7.955955] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ OK ] Created slice system-systemd\x2dfsck.slice.
[ 7.972873] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 7.979373] systemd[1]: Starting system-getty.slice.
[ OK ] Created slice system-getty.slice.
[ 7.992846] systemd[1]: Created slice system-getty.slice.
[ 7.998580] systemd[1]: Starting system-serial\x2dgetty.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ 8.012866] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 8.019988] systemd[1]: Starting Create list of required static device nodes for the current kernel...
Starting Create list of required static device nodes...rrent kernel...
[ 8.044762] systemd[1]: Mounting Debug File System...
Mounting Debug File System...
[ 8.053582] systemd[1]: Mounting Huge Pages File System...
Mounting Huge Pages File System...
[ 8.109582] systemd[1]: Starting Load Kernel Modules...
Starting Load Kernel Modules...
[ 8.118909] systemd[1]: Mounting POSIX Message Queue File System...
Mounting POSIX Message Queue File System...
[ 8.133810] systemd[1]: Started Set Up Additional Binary Formats.
[ 8.140260] systemd[1]: Starting udev Coldplug all Devices...
Starting udev Coldplug all Devices...
[ 8.150142] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ OK ] [ 8.163665] systemd[1]: Started Journal Service.
Started Journal Service.
[ OK ] Reached target Slices.
[ OK ] Started Create list of required static device nodes ...current kernel.
Starting Create Static Device Nodes in /dev...
[ OK ] Started Load Kernel Modules.
Starting Apply Kernel Variables...
[ OK ] Started udev Coldplug all Devices.
[ OK ] Started Apply Kernel Variables.
[ OK ] Started Create Static Device Nodes in /dev.
Starting udev Kernel Device Manager...
[ 8.860356] systemd-udevd[144]: starting version 215
[ OK ] Started udev Kernel Device Manager.
Starting Copy rules generated while the root was ro...
[ OK ] Started Copy rules generated while the root was ro.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Mounted Huge Pages File System.
[ OK ] Mounted Debug File System.
[ 9.514584] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 9.550477] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[ 9.582377] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 9.591127] ehci-platform: EHCI generic platform driver
[ 9.601597] platform 1c14000.usb: Driver ehci-platform requests probe deferral
[ 9.615499] platform 1c14000.usb: Driver ehci-platform requests probe deferral
[ 9.626154] ehci-platform 1c1c000.usb: EHCI Host Controller
[ 9.634769] ehci-platform 1c14000.usb: EHCI Host Controller
[ 9.649943] ohci-platform: OHCI generic platform driver
[ 9.658941] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 1
[ 9.677808] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000
[ 9.685133] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 2
[ 9.695703] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000
[ OK ] Found device /dev/ttyS0.
[ 9.705108] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[ 9.713041] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 9.720047] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.727365] usb usb1: Product: EHCI Host Controller
[ 9.732359] usb usb1: Manufacturer: Linux 3.16.0-4-armmp-lpae ehci_hcd
[ 9.738957] usb usb1: SerialNumber: 1c1c000.usb
[ 9.744037] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
[ 9.751741] hub 1-0:1.0: USB hub found
[ 9.755661] hub 1-0:1.0: 1 port detected
[ 9.760551] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 9.767458] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.774771] usb usb2: Product: EHCI Host Controller
[ 9.779826] usb usb2: Manufacturer: Linux 3.16.0-4-armmp-lpae ehci_hcd
[ 9.786431] usb usb2: SerialNumber: 1c14000.usb
[ 9.791345] ohci-platform 1c14400.usb: Generic Platform OHCI controller
[ 9.803362] hub 2-0:1.0: USB hub found
[ 9.808515] hub 2-0:1.0: 1 port detected
[ 9.814617] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3
[ 9.823684] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400
[ 9.861614] systemd-fsck[124]: /dev/sda2: clean, 32905/60653568 files, 4033867/242612480 blocks
[ 9.890421] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.897289] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.904594] usb usb3: Product: Generic Platform OHCI controller
[ 9.910581] usb usb3: Manufacturer: Linux 3.16.0-4-armmp-lpae ohci_hcd
[ 9.917169] usb usb3: SerialNumber: 1c14400.usb
[ 9.924246] hub 3-0:1.0: USB hub found
[ 9.928868] hub 3-0:1.0: 1 port detected
[ 9.933920] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
[ 9.946053] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4
[ 9.954012] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400
[ OK ] Started File System Check on Root Device.
[ 10.017066] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.027491] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.034798] usb usb4: Product: Generic Platform OHCI controller
[ 10.040785] usb usb4: Manufacturer: Linux 3.16.0-4-armmp-lpae ohci_hcd
[ 10.047449] usb usb4: SerialNumber: 1c1c400.usb
[ 10.065756] hub 4-0:1.0: USB hub found
[ 10.069677] hub 4-0:1.0: 1 port detected
Starting Remount Root and Kernel File Systems...
[ 10.169202] cfg80211: Calling CRDA to update world regulatory domain
[ 10.301262] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ OK ] Started Remount Root and Kernel File Systems.
Starting Load/Save Random Seed...
[ 10.354962] brcmfmac_sdio mmc1:0001:1: firmware: failed to load brcm/brcmfmac43362-sdio.bin (-2)
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Started Load/Save Random Seed.
[ OK ] Found device HGST_HTS541010A9E680 1.
Starting File System Check on /dev/disk/by-uuid/f4bf...54bc7705c6bb...
[ OK ] Created slice system-ifup.slice.
[ OK ] Found device HGST_HTS541010A9E680 5.
Activating swap /dev/disk/by-uuid/2af38901-2d58-4843...abb7ee7bd8c5...
[ 10.742899] Adding 6061052k swap on /dev/sda5. Priority:-1 extents:1 across:6061052k FS
[ OK ] Activated swap /dev/disk/by-uuid/2af38901-2d58-4843-acc1-abb7ee7bd8c5.
[ OK ] Reached target Swap.
[ 10.849500] systemd-fsck[182]: /dev/sda1: clean, 22/62248 files, 27562/248832 blocks
[ OK ] Started File System Check on /dev/disk/by-uuid/f4bf8...3-54bc7705c6bb.
Mounting /boot...
[ 11.010164] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 11.020502] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ OK ] Mounted /boot.
[ OK ] Reached target Local File Systems.
Starting Create Volatile Files and Directories...
[ OK ] Reached target Remote File Systems.
Starting Trigger Flushing of Journal to Persistent Storage...
Starting LSB: Raise network interfaces....
[ 11.122668] systemd-journald[132]: Received request to flush runtime journal from PID 1
[ OK ] Started Trigger Flushing of Journal to Persistent Storage.
[ OK ] Started Create Volatile Files and Directories.
Starting Update UTMP about System Boot/Shutdown...
[ 11.385016] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Started LSB: Raise network interfaces..
Starting ifup for eth0...
[ OK ] Started ifup for eth0.
[ OK ] Reached target Network.
[ OK ] Reached target Network is Online.
Starting LSB: RPC portmapper replacement...
[ 12.309114] No MAC Management Counters available
[ OK ] Started LSB: RPC portmapper replacement.
[ OK ] Reached target RPC Port Mapper.
Starting LSB: NFS support files common to client and server...
[ 12.400787] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
[ 12.763318] RPC: Registered named UNIX socket transport module.
[ 12.769327] RPC: Registered udp transport module.
[ 12.774082] RPC: Registered tcp transport module.
[ 12.778840] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 12.848310] FS-Cache: Loaded
[ 12.882924] FS-Cache: Netfs 'nfs' registered for caching
[ 13.004200] Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
[ OK ] Started LSB: NFS support files common to client and server.
[ OK ] Reached target System Initialization.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Timers.
[ OK ] Reached target Basic System.
Starting Regular background program processing daemon...
[ OK ] Started Regular background program processing daemon.
Starting Deferred execution scheduler...
[ OK ] Started Deferred execution scheduler.
Starting /etc/rc.local Compatibility...
Starting Login Service...
Starting LSB: exim Mail Transport Agent...
Starting D-Bus System Message Bus...
[ OK ] Started D-Bus System Message Bus.
Starting System Logging Service...
Starting Permit User Sessions...
[ OK ] Started /etc/rc.local Compatibility.
[ OK ] Started Login Service.
[ OK ] Started Permit User Sessions.
Starting Getty on tty1...
[ OK ] Started Getty on tty1.
Starting Serial Getty on ttyS0...
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Reached target Login Prompts.
[ OK ] Started System Logging Service.
[ 14.297105] stmmaceth 1c50000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ OK ] Started LSB: exim Mail Transport Agent.
[ OK ] Reached target Multi-User System.
[ OK ] Reached target Graphical Interface.
Starting Update UTMP about System Runlevel Changes...
[ OK ] Started Update UTMP about System Runlevel Changes.
Debian GNU/Linux jessie/sid debian ttyS0
debian login:
-----8<----------8<----------8<----------8<----------8<----------8<-----
Regards,
Karsten
--
Gem. Par. 28 Abs. 4 Bundesdatenschutzgesetz widerspreche ich der Nutzung
sowie der Weitergabe meiner personenbezogenen Daten für Zwecke der
Werbung sowie der Markt- oder Meinungsforschung.
--
To UNSUBSCRIBE, email to debian-boot-REQUEST at lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster at lists.debian.org
Archive: https://lists.debian.org/20141115220857.GA24004@excalibur.cnev.de
** CRM114 Whitelisted by: From: Karsten Merker <merker at debian.org> **
----- End forwarded message -----
--
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.alioth.debian.org/pipermail/pkg-systemd-maintainers/attachments/20141116/3637cc81/attachment-0001.sig>
More information about the Pkg-systemd-maintainers
mailing list