Bug#762953: no network after emergency mode
Marc Haber
mh+debian-packages at zugschlus.de
Fri Sep 26 14:28:50 BST 2014
Package: systemd
Version: 215-4
Severity: normal
Hi,
Given a system with a non-essential crypt disk, which should be
unlocked on boot and mounted via /etc/fstab.
I then enter three times a wrong key and get dumped to emergency mode.
In emergency mode, the network seems fine.
I then exit emergency mode and get prompted for the cryptdisk key
again. This time, I enter the correct one, boot completes, and I can
log in on the console, but find the network gone.
Is that intended behavior?
Please note that a bunch of noauto was removed from fstab and crypttab
to force emergency mode for demonstration purposes.
Greetings
Marc
/etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
/dev/mapper/sid--test--vg-root / ext4 errors=remount-ro 0 1
/dev/mapper/rootcrypt /mnt/tempdisk ext4 defaults 0 0
# /boot was on /dev/vda1 during installation
UUID=3ec8d768-3eae-402f-9b10-9acbdc96d1c4 /boot ext2 defaults 0 2
/dev/mapper/sid--test--vg-swap_1 none swap sw 0 0
/dev/sr0 /media/cdrom0 udf,iso9660 user,noauto 0 0
/etc/crypttab
# <target name> <source device> <key file> <options>
rootcrypt /dev/mapper/sid--test--vg-c_root none luks,discard
Console transcript
Loading Linux 3.16-2-amd64 ...
Loading initial ramdisk ...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16-2-amd64 (debian-kernel at lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-11) ) #1 SMP Debian 3.16.3-2 (2014-09-20)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.16-2-amd64 root=/dev/mapper/sid--test--vg-root ro systemd.debug=1 console=ttyS0,57600n8
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffdfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001fffe000-0x000000001fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1fffe max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f1ae0-0x000f1aef] mapped at [ffff8800000f1ae0]
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] init_memory_mapping: [mem 0x1fc00000-0x1fdfffff]
[ 0.000000] init_memory_mapping: [mem 0x1c000000-0x1fbfffff]
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1bffffff]
[ 0.000000] init_memory_mapping: [mem 0x1fe00000-0x1fffdfff]
[ 0.000000] RAMDISK: [mem 0x1ecfc000-0x1fb3dfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F1950 000014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 0x000000001FFFFB3C 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 0x000000001FFFF177 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 0x000000001FFFE040 001137 (v01 BXPC BXDSDT 00000001 INTL 20130823)
[ 0.000000] ACPI: FACS 0x000000001FFFE000 000040
[ 0.000000] ACPI: SSDT 0x000000001FFFF1EB 000899 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 0x000000001FFFFA84 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 0x000000001FFFFB04 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001fffdfff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1fffdfff]
[ 0.000000] NODE_DATA [mem 0x1fff9000-0x1fffdfff]
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:1fff1001, primary cpu clock
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffdfff]
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x20000000-0xfeffbfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88001fc00000 s85824 r8192 d20672 u1048576
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 1fc0e080
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 129159
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16-2-amd64 root=/dev/mapper/sid--test--vg-root ro systemd.debug=1 console=ttyS0,57600n8
[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Memory: 489272K/523888K available (5188K kernel code, 941K rwdata, 1824K rodata, 1196K init, 840K bss, 34616K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] tsc: Detected 3214.344 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.008000] Calibrating delay loop (skipped) preset value.. 6428.68 BogoMIPS (lpj=12857376)
[ 0.008000] pid_max: default: 32768 minimum: 301
[ 0.008000] ACPI: Core revision 20140424
[ 0.008213] ACPI: All ACPI Tables successfully acquired
[ 0.008878] Security Framework initialized
[ 0.009341] AppArmor: AppArmor disabled by boot time parameter
[ 0.009984] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.010744] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.011687] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.012082] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.012841] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.013796] Initializing cgroup subsys memory
[ 0.014303] Initializing cgroup subsys devices
[ 0.014813] Initializing cgroup subsys freezer
[ 0.016006] Initializing cgroup subsys net_cls
[ 0.016508] Initializing cgroup subsys blkio
[ 0.016990] Initializing cgroup subsys perf_event
[ 0.017530] Initializing cgroup subsys net_prio
[ 0.018091] mce: CPU supports 10 MCE banks
[ 0.018601] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.018601] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.018601] tlb_flushall_shift: -1
[ 0.020177] Freeing SMP alternatives memory: 20K (ffffffff81a18000 - ffffffff81a1d000)
[ 0.023436] ftrace: allocating 21542 entries in 85 pages
[ 0.029264] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.032002] smpboot: CPU0: AMD QEMU Virtual CPU version 1.7.1 (fam: 06, model: 06, stepping: 03)
[ 0.036000] Performance Events: Broken PMU hardware detected, using software events only.
[ 0.036000] Failed to access perfctr msr (MSR c0010001 is ffffffffffffffff)
[ 0.036000] x86: Booting SMP configuration:
[ 0.036003] .... node #0, CPUs: #1
[ 0.008000] kvm-clock: cpu 1, msr 0:1fff1041, secondary cpu clock
[ 0.048181] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.048826] x86: Booted up 1 node, 2 CPUs
[ 0.048797] KVM setup async PF for cpu 1
[ 0.048797] kvm-stealtime: cpu 1, msr 1fd0e080
[ 0.050099] smpboot: Total of 2 processors activated (12857.37 BogoMIPS)
[ 0.051385] devtmpfs: initialized
[ 0.054698] pinctrl core: initialized pinctrl subsystem
[ 0.056125] NET: Registered protocol family 16
[ 0.056730] cpuidle: using governor ladder
[ 0.057177] cpuidle: using governor menu
[ 0.057735] ACPI: bus type PCI registered
[ 0.058182] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.059034] PCI: Using configuration type 1 for base access
[ 0.072207] ACPI: Added _OSI(Module Device)
[ 0.072608] ACPI: Added _OSI(Processor Device)
[ 0.073113] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.073612] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.077013] ACPI: Interpreter enabled
[ 0.077566] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.078890] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.080017] ACPI: (supports S0 S3 S4 S5)
[ 0.080576] ACPI: Using IOAPIC for interrupt routing
[ 0.081284] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.085734] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.086617] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.087609] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.088075] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.089575] acpiphp: Slot [3] registered
[ 0.090015] acpiphp: Slot [4] registered
[ 0.090484] acpiphp: Slot [5] registered
[ 0.090923] acpiphp: Slot [6] registered
[ 0.091382] acpiphp: Slot [7] registered
[ 0.092018] acpiphp: Slot [8] registered
[ 0.092471] acpiphp: Slot [9] registered
[ 0.092915] acpiphp: Slot [10] registered
[ 0.093371] acpiphp: Slot [11] registered
[ 0.093822] acpiphp: Slot [12] registered
[ 0.094266] acpiphp: Slot [13] registered
[ 0.094723] acpiphp: Slot [14] registered
[ 0.095177] acpiphp: Slot [15] registered
[ 0.095631] acpiphp: Slot [16] registered
[ 0.096017] acpiphp: Slot [17] registered
[ 0.096475] acpiphp: Slot [18] registered
[ 0.096921] acpiphp: Slot [19] registered
[ 0.097370] acpiphp: Slot [20] registered
[ 0.097820] acpiphp: Slot [21] registered
[ 0.098259] acpiphp: Slot [22] registered
[ 0.098693] acpiphp: Slot [23] registered
[ 0.099139] acpiphp: Slot [24] registered
[ 0.099600] acpiphp: Slot [25] registered
[ 0.100018] acpiphp: Slot [26] registered
[ 0.100469] acpiphp: Slot [27] registered
[ 0.100909] acpiphp: Slot [28] registered
[ 0.101349] acpiphp: Slot [29] registered
[ 0.101827] acpiphp: Slot [30] registered
[ 0.102268] acpiphp: Slot [31] registered
[ 0.102699] PCI host bridge to bus 0000:00
[ 0.103142] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.104002] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.104655] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.105301] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.106026] pci_bus 0000:00: root bus resource [mem 0x20000000-0xfebfffff]
[ 0.112038] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.112881] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.113590] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.114350] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.120391] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
[ 0.121176] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
[ 0.155036] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.155699] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.156240] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.156978] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.157658] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[ 0.158296] acpi LNXCPU:00: Invalid PBLK length [0]
[ 0.158886] acpi LNXCPU:01: Invalid PBLK length [0]
[ 0.159582] ACPI: Enabled 16 GPEs in block 00 to 0F
[ 0.160121] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.160890] vgaarb: loaded
[ 0.161188] vgaarb: bridge control possible 0000:00:02.0
[ 0.161802] PCI: Using ACPI for IRQ routing
[ 0.162517] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.163282] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.164153] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 0.168089] Switched to clocksource kvm-clock
[ 0.173095] pnp: PnP ACPI init
[ 0.173932] ACPI: bus type PNP registered
[ 0.175082] pnp: PnP ACPI: found 7 devices
[ 0.175546] ACPI: bus type PNP unregistered
[ 0.191450] NET: Registered protocol family 2
[ 0.192900] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.194401] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.195586] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.196289] TCP: reno registered
[ 0.196640] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.197259] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.198175] NET: Registered protocol family 1
[ 0.198659] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.199302] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.199920] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.200842] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.202039] Unpacking initramfs...
[ 0.409783] Freeing initrd memory: 14600K (ffff88001ecfc000 - ffff88001fb3e000)
[ 0.410795] microcode: AMD CPU family 0x6 not supported
[ 0.412372] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.415166] audit: initializing netlink subsys (disabled)
[ 0.417674] audit: type=2000 audit(1411737673.153:1): initialized
[ 0.421246] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.423464] zbud: loaded
[ 0.424287] VFS: Disk quotas dquot_6.5.2
[ 0.424796] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.425599] msgmni has been set to 984
[ 0.426918] alg: No test for stdrng (krng)
[ 0.427334] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.428104] io scheduler noop registered
[ 0.428536] io scheduler deadline registered
[ 0.429085] io scheduler cfq registered (default)
[ 0.429716] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.430333] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.431108] GHES: HEST is not enabled!
[ 0.431587] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.454679] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.455844] Linux agpgart interface v0.103
[ 0.456451] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.457886] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.458456] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.459033] mousedev: PS/2 mouse device common for all mice
[ 0.459866] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.460981] rtc_cmos 00:00: RTC can wake from S4
[ 0.461705] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 0.462507] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
[ 0.463352] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.464067] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel at amd.com>
[ 0.464770] AMD IOMMUv2 functionality not available on this system
[ 0.465500] TCP: cubic registered
[ 0.466073] NET: Registered protocol family 10
[ 0.466958] mip6: Mobile IPv6
[ 0.467313] NET: Registered protocol family 17
[ 0.467802] mpls_gso: MPLS GSO support
[ 0.468438] registered taskstats version 1
[ 0.469421] rtc_cmos 00:00: setting system clock to 2014-09-26 13:21:12 UTC (1411737672)
[ 0.471777] Freeing unused kernel memory: 1196K (ffffffff818ed000 - ffffffff81a18000)
[ 0.472692] Write protecting the kernel read-only data: 8192k
[ 0.475473] Freeing unused kernel memory: 944K (ffff880001514000 - ffff880001600000)
[ 0.476881] Freeing unused kernel memory: 224K (ffff8800017c8000 - ffff880001800000)
Loading, please wait...
[ 0.542336] systemd-udevd[60]: starting version 215
[ 0.544334] random: systemd-udevd urandom read with 2 bits of entropy available
[ 0.551831] SCSI subsystem initialized
[ 0.554155] ACPI: bus type USB registered
[ 0.555646] usbcore: registered new interface driver usbfs
[ 0.557681] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 0.559012] usbcore: registered new interface driver hub
[ 0.561142] usbcore: registered new device driver usb
[ 0.562970] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.567309] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.568280] scsi0 : ata_piix
[ 0.568935] scsi1 : ata_piix
[ 0.569315] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0a0 irq 14
[ 0.570038] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0a8 irq 15
[ 0.571108] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 0.574148] uhci_hcd 0000:00:01.2: UHCI Host Controller
[ 0.574687] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[ 0.575805] uhci_hcd 0000:00:01.2: detected 2 ports
[ 0.577019] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c040
[ 0.578355] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.579597] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.580645] usb usb1: Product: UHCI Host Controller
[ 0.581043] FDC 0 is a S82078B
[ 0.581963] usb usb1: Manufacturer: Linux 3.16-2-amd64 uhci_hcd
[ 0.582702] usb usb1: SerialNumber: 0000:00:01.2
[ 0.583342] hub 1-0:1.0: USB hub found
[ 0.584179] hub 1-0:1.0: 2 ports detected
[ 0.597468] vda: vda1 vda2 < vda5 >
[ 0.725372] ata2.00: ATAPI: QEMU DVD-ROM, 1.7.1, max UDMA/100
[ 0.728099] ata2.00: configured for MWDMA2
[ 0.731906] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 1.7. PQ: 0 ANSI: 5
[ 0.744818] sr0: scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 0.745547] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.747496] sr 1:0:0:0: Attached scsi generic sg0 type 5
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... [ 0.827439] device-mapper: uevent: version 1.0.3
[ 0.828616] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel at redhat.com
[ 0.896130] usb 1-1: new full-speed USB device number 2 using uhci_hcd
done.
Begin: Running /scripts/local-premount ... [ 0.931679] PM: Starting manual resume from disk
done.
[ 0.944068] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
[ 1.010941] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 1.014131] systemd[1]: Detected virtualization 'kvm'.
[ 1.015278] systemd[1]: Detected architecture 'x86-64'.
Welcome to Debian GNU/Linux jessie/sid!
[ 1.026752] systemd[1]: Inserted module 'autofs4'
[ 1.028871] systemd[1]: Set hostname to <sid-test>.
[ 1.064745] usb 1-1: New USB device found, idVendor=0627, idProduct=0001
[ 1.065800] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
[ 1.066836] usb 1-1: Product: QEMU USB Tablet
[ 1.067607] usb 1-1: Manufacturer: QEMU
[ 1.068505] usb 1-1: SerialNumber: 42
[ 1.109626] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 1.111741] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 1.112728] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 1.113629] systemd[1]: Expecting device dev-ttyS0.device...
Expecting device dev-ttyS0.device...
[ 1.115490] systemd[1]: Starting Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems (Pre).
[ 1.118931] systemd[1]: Reached target Remote File Systems (Pre).
[ 1.120415] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ OK ] Set up automount Arbitrary Executable File Formats F...utomount Point.
[ 1.125265] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 1.127691] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 1.131560] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 1.132880] systemd[1]: Starting Paths.
[ OK ] Reached target Paths.
[ 1.134900] systemd[1]: Reached target Paths.
[ 1.135807] systemd[1]: Expecting device dev-mapper-sid\x2d\x2dtest\x2d\x2dvg\x2dswap_1.device...
Expecting device dev-mapper-sid\x2d\x2dtest\x2d\x2dv...wap_1.device...
[ 1.138779] systemd[1]: Expecting device dev-mapper-sid\x2d\x2dtest\x2d\x2dvg\x2dc_root.device...
Expecting device dev-mapper-sid\x2d\x2dtest\x2d\x2dv..._root.device...
[ 1.141926] systemd[1]: Expecting device dev-mapper-rootcrypt.device...
Expecting device dev-mapper-rootcrypt.device...
[ 1.144348] systemd[1]: Expecting device dev-disk-by\x2duuid-3ec8d768\x2d3eae\x2d402f\x2d9b10\x2d9acbdc96d1c4.device...
Expecting device dev-disk-by\x2duuid-3ec8d768\x2d3ea...6d1c4.device...
[ 1.147384] systemd[1]: Starting Root Slice.
[ OK ] Created slice Root Slice.
[ 1.152136] systemd[1]: Created slice Root Slice.
[ 1.152750] systemd[1]: Starting User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 1.154470] systemd[1]: Created slice User and Session Slice.
[ 1.155154] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ 1.157136] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 1.157981] systemd[1]: Starting Delayed Shutdown Socket.
[ OK ] Listening on Delayed Shutdown Socket.
[ 1.159584] systemd[1]: Listening on Delayed Shutdown Socket.
[ 1.160339] systemd[1]: Starting Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 1.162368] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.163095] systemd[1]: Starting Syslog Socket.
[ OK ] Listening on Syslog Socket.
[ 1.164750] systemd[1]: Listening on Syslog Socket.
[ 1.165491] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ OK ] Listening on Device-mapper event daemon FIFOs.
[ 1.168381] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 1.169125] systemd[1]: Starting LVM2 metadata daemon socket.
[ OK ] Listening on LVM2 metadata daemon socket.
[ 1.170894] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 1.171662] systemd[1]: Starting udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 1.173214] systemd[1]: Listening on udev Control Socket.
[ 1.173974] systemd[1]: Starting udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 1.175502] systemd[1]: Listening on udev Kernel Socket.
[ 1.176218] systemd[1]: Starting Journal Socket.
[ OK ] Listening on Journal Socket.
[ 1.177852] systemd[1]: Listening on Journal Socket.
[ 1.178442] systemd[1]: Starting System Slice.
[ OK ] Created slice System Slice.
[ 1.180208] systemd[1]: Created slice System Slice.
[ 1.180919] systemd[1]: Starting File System Check on Root Device...
Starting File System Check on Root Device...
[ 1.182929] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ OK ] Created slice system-systemd\x2dfsck.slice.
[ 1.185634] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 1.186540] systemd[1]: Starting system-getty.slice.
[ OK ] Created slice system-getty.slice.
[ 1.189037] systemd[1]: Created slice system-getty.slice.
[ 1.189848] systemd[1]: Starting system-serial\x2dgetty.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ 1.192898] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 1.195156] systemd[1]: Starting Load Kernel Modules...
Starting Load Kernel Modules...
[ 1.198395] systemd[1]: Starting Create list of required static device nodes for the current kernel...
Starting Create list of required static device nodes...rrent kernel...
[ 1.203781] systemd[1]: Mounting POSIX Message Queue File System...
Mounting POSIX Message Queue File System...
[ 1.206446] systemd[1]: Starting system-systemd\x2dcryptsetup.slice.
[ OK ] Created slice system-systemd\x2dcryptsetup.slice.
[ 1.209869] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
[ 1.211580] systemd[1]: Started Set Up Additional Binary Formats.
[ 1.212642] systemd[1]: Mounting Huge Pages File System...
Mounting Huge Pages File System...
[ 1.215291] systemd[1]: Mounting Debug File System...
Mounting Debug File System...
[ 1.217733] systemd[1]: Starting udev Coldplug all Devices...
Starting udev Coldplug all Devices...
[ 1.220470] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ OK ] Started Journal Service.
[ 1.224204] systemd[1]: Started Journal Service.
[ OK ] Reached target Slices.
[ OK ] Mounted Debug File System.
[ OK ] Mounted Huge Pages File System.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Started Load Kernel Modules.
[ OK ] Started Create list of required static device nodes ...current kernel.
Starting Create Static Device Nodes in /dev...
Starting Apply Kernel Variables...
[ OK ] Started udev Coldplug all Devices.
Starting udev Wait for Complete Device Initialization...
[ 1.257437] systemd-fsck[143]: /dev/mapper/sid--test--vg-root: clean, 47341/121920 files, 323370/487424 blocks
[ OK ] Started File System Check on Root Device.
[ OK ] Started Apply Kernel Variables.
[ OK ] Started Create Static Device Nodes in /dev.
Starting udev Kernel Device Manager...
[ 1.296584] systemd-udevd[169]: starting version 215
[ OK ] Started udev Kernel Device Manager.
Starting LSB: Set preliminary keymap...
[ 1.329920] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.330979] ACPI: Power Button [PWRF]
[ 1.335121] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0
[ 1.339115] [drm] Initialized drm 1.1.0 20060810
[ 1.345672] parport_pc 00:04: reported by Plug and Play ACPI
[ 1.358116] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ OK ] Found device /dev/ttyS0.
[ 1.371255] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.380093] kvm: Nested Virtualization enabled
[ 1.381680] usbcore: registered new interface driver usbhid
[ 1.382492] usbhid: USB HID core driver
[ OK ] Created slice system-lvm2\x2dpvscan.slice.
Starting LVM2 PV scan on device 254:5...
[ OK ] Created slice system-ifup.slice.[ 1.409365] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input5
[ 1.410969] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0
[ 1.411880] ppdev: user-space parallel port driver
[ OK ] Started LVM2 PV scan on device 254:5.
[ OK ] Found device /dev/disk/by-uuid/3ec8d768-3eae-402f-9b10-9acbdc96d1c4.
[ OK ] Found device /dev/mapper/sid--test--vg-swap_1.
Activating swap /dev/mapper/sid--test--vg-swap_1...
Starting File System Check on /dev/disk/by-uuid/3ec8...9acbdc96d1c4...
[ 1.448268] Adding 217084k swap on /dev/mapper/sid--test--vg-swap_1. Priority:-1 extents:1 across:217084k FS
[ OK ] Activated swap /dev/mapper/sid--test--vg-swap_1.
[ OK ] Started udev Wait for Complete Device Initialization.
Starting Activation of LVM2 logical volumes...
Starting Copy rules generated while the root was ro...
[ OK ] Reached target Swap.
[ 1.471754] systemd-fsck[235]: /dev/vda1: clean, 332/62248 files, 59994/248832 blocks
[ OK ] Started File System Check on /dev/disk/by-uuid/3ec8d...0-9acbdc96d1c4.
[ OK ] Started Copy rules generated while the root was ro.
[ OK ] Started Activation of LVM2 logical volumes.
[ OK ] Found device /dev/mapper/sid--test--vg-c_root.
Starting Cryptography Setup for rootcrypt...
Starting Dispatch Password Requests to Console...
[ OK ] Started Dispatch Password Requests to Console.
Starting Activation of LVM2 logical volumes...
Please enter passphrase for disk sid--test--vg-c_root (rootcrypt) on /mnt/tempdisk! [ OK ] Started LSB: Set preliminary keymap.
Starting Remount Root and Kernel File Systems...
[ 1.536957] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ OK ] Started Remount Root and Kernel File Systems.
Starting Load/Save Random Seed...
[ OK ] Reached target Local File Systems (Pre).
Mounting /boot...
[ OK ] Started Load/Save Random Seed.
[ OK ] Started Activation of LVM2 logical volumes.
[ 1.549599] EXT4-fs (vda1): mounting ext2 file system using the ext4 subsystem
[ 1.551480] EXT4-fs (vda1): mounted filesystem without journal. Opts: (null)
[ OK ] Mounted /boot.
[ 2.204723] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
*
[ 5.198927] NET: Registered protocol family 38
Please enter passphrase for disk sid--test--vg-c_root (rootcrypt) on /mnt/tempdisk! Starting Activation of LVM2 logical volumes...
[ OK ] Started Dispatch Password Requests to Console.
[ OK ] Started Activation of LVM2 logical volumes.
*
Please enter passphrase for disk sid--test--vg-c_root (rootcrypt) on /mnt/tempdisk! [ OK ] Started Dispatch Password Requests to Console.
Starting Activation of LVM2 logical volumes...
[ OK ] Started Activation of LVM2 logical volumes.
*
[FAILED] Failed to start Cryptography Setup for rootcrypt.
See 'systemctl status systemd-cryptsetup at rootcrypt.service' for details.
[DEPEND] Dependency failed for Encrypted Volumes.
[DEPEND] Dependency failed for /mnt/tempdisk.
[DEPEND] Dependency failed for Local File Systems.
[ OK ] Closed ACPID Listen Socket.
[ OK ] Stopped Getty on tty1.
[ OK ] Stopped Serial Getty on ttyS0.
[ OK ] Stopped Forward Password Requests to Wall.
[ OK ] Stopped target Graphical Interface.
[ OK ] Stopped target Multi-User System.
[ OK ] Stopped Deferred execution scheduler.
[ OK ] Stopped OpenBSD Secure Shell server.
[ OK ] Stopped Regular background program processing daemon.
[ OK ] Stopped /etc/rc.local Compatibility.
[ OK ] Stopped Login Service.
[ OK ] Reached target Login Prompts.
[ OK ] Stopped LSB: exim Mail Transport Agent.
[ OK ] Stopped D-Bus System Message Bus.
[ OK ] Closed D-Bus System Message Bus Socket.
[ OK ] Stopped Permit User Sessions.
[ OK ] Reached target Remote File Systems.
Starting Trigger Flushing of Journal to Persistent Storage...
[ OK ] Stopped System Logging Service.
[ OK ] Stopped target Basic System.
[ OK ] Reached target Timers.
[ OK ] Stopped target System Initialization.
Starting Create Volatile Files and Directories...
Starting LSB: Raise network interfaces....
[ OK ] Closed Syslog Socket.
[ OK ] Reached target Sockets.
Starting Emergency Shell...
[ OK ] Started Emergency Shell.
[ OK ] Reached target Emergency Mode.
Starting Activation of LVM2 logical volumes...
[ OK ] Started Create Volatile Files and Directories.
[ 10.602744] systemd-journald[156]: Received request to flush runtime journal from PID 1
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Started Trigger Flushing of Journal to Persistent Storage.
[ OK ] Started Activation of LVM2 logical volumes.
Starting Monitoring of LVM2 mirrors, snapshots etc. ...ress polling...
[ OK ] Started Update UTMP about System Boot/Shutdown.
Starting Update UTMP about System Runlevel Changes...
[ OK ] Started Update UTMP about System Runlevel Changes.
[ OK ] Started Monitoring of LVM2 mirrors, snapshots etc. u...ogress polling.
[ OK ] Started LSB: Raise network interfaces..
Starting ifup for eth0...
[ OK ] Started ifup for eth0.
[ OK ] Reached target Network.
[ OK ] Reached target Network is Online.
Starting LSB: RPC portmapper replacement...
[ OK ] Started LSB: RPC portmapper replacement.
[ OK ] Reached target RPC Port Mapper.
Starting LSB: NFS support files common to client and server...
[ 10.732245] RPC: Registered named UNIX socket transport module.
[ 10.733136] RPC: Registered udp transport module.
[ 10.733808] RPC: Registered tcp transport module.
[ 10.734496] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.738973] FS-Cache: Loaded
[ 10.745224] FS-Cache: Netfs 'nfs' registered for caching
[ 10.752650] Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
[ OK ] Started LSB: NFS support files common to client and server.
Starting LSB: Prepare console...
[ OK ] Started LSB: Prepare console.
Starting LSB: Set console font and keymap...
[ OK ] Started LSB: Set console font and keymap.
Welcome to emergGive root password for maintenance
(or type Control-D to continue):
root at sid-test:~# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 52:54:00:cd:0c:87 brd ff:ff:ff:ff:ff:ff
inet 192.168.19.21/24 brd 192.168.19.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 2a01:238:4071:321d:5054:ff:fecd:c87/64 scope global mngtmpaddr dynamic
valid_lft 86398sec preferred_lft 14398sec
inet6 fe80::5054:ff:fecd:c87/64 scope link
valid_lft forever preferred_lft forever
root at sid-test:~# exit
Please enter passphrase for disk sid--test--vg-c_root (rootcrypt) on /mnt/tempdisk! ****
[ 20.774607] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 20.815950] systemd-journald[156]: Received request to flush runtime journal from PID 1
Debian GNU/Linux jessie/sid sid-test ttyS0
sid-test login: root
Password:
Last login: Fri Sep 26 15:13:50 CEST 2014 on ttyS0
Linux sid-test 3.16-2-amd64 #1 SMP Debian 3.16.3-2 (2014-09-20) x86_64
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root at sid-test:~# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
link/ether 52:54:00:cd:0c:87 brd ff:ff:ff:ff:ff:ff
root at sid-test:~# [ 47.585254] random: nonblocking pool is initialized
[5/503]mh at fan:~$
-- Package-specific info:
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.16-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages systemd depends on:
ii acl 2.2.52-2
ii adduser 3.113+nmu3
ii initscripts 2.88dsf-53.4
ii libacl1 2.2.52-2
ii libaudit1 1:2.4-1
ii libblkid1 2.20.1-5.8
ii libc6 2.19-11
ii libcap2 1:2.24-6
ii libcap2-bin 1:2.24-6
ii libcryptsetup4 2:1.6.6-1
ii libgcrypt11 1.5.4-3
ii libkmod2 18-2
ii liblzma5 5.1.1alpha+20120614-2
ii libpam0g 1.1.8-3.1
ii libselinux1 2.3-2
ii libsystemd0 215-4
ii sysv-rc 2.88dsf-53.4
ii udev 215-4
ii util-linux 2.20.1-5.8
Versions of packages systemd recommends:
ii dbus 1.8.8-1
pn libpam-systemd <none>
Versions of packages systemd suggests:
pn systemd-ui <none>
-- no debconf information
More information about the Pkg-systemd-maintainers
mailing list