Bug#386347: [Pkg-sysvinit-devel] Bug#386347: initscripts 2.86.ds1-18
didn't fix my boot problem
Peter Colberg
peterco at gmx.net
Sat Sep 9 15:05:06 UTC 2006
Hi,
after fully recovering from the update-rc.d breakage, I also still have
trouble booting with sysvinit version 2.86.ds1-18. Downgrading to
2.86.ds1-15 solves the problem.
Upon trying to boot an LVM on root system, with a custom kernel and an
initrd image residing on a small boot partition, I receive an fsck
error message as follows below. I have attached dumps acquired from the
rescue shell of /proc/mdstat, /proc/mounts, my fstab as well as the
output of fdisk, lvdisplay, vgdisplay and mount in order to provide
some detail on my system.
I hope this will help resolve the issue in some way.
Regards,
Peter
==
Switching root ...
INIT: version 2.86 booting
Setting hostname to 'maia' ...done.
Starting the hotplug events dispatcher: udevd.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...eth1394: eth2: IEEE-1394 IPv4 over 1394
Ethernet (fw-host0)
done.
Setting parameters of disc: (none).
Activating swap:swapon: unable to open loop device /dev/loop6
failed!
* Files under mount point '/tmp' will be hidden.
Will now check root file system: fsck 1.39 (29-May-2006)
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a rootdev -C0 /dev/vg/root
Usage: fsck.ext3 [-panyrcdfvstDFSV] [-b superblock] [-B blocksize]
[-I inode_buffer_blocks] [-P process_inode_size]
[-I|-L bad_blocks_file] [-C fd] [-j external_journal]
[-E extended-options] device
Emergency help:
-p Automatic repair (no questions)
-n Make no changes to the filesystem
-y Assume "yes" to all questions
-c Check for bad blocks and add them to badblock list
-f Force checking even if filesystem is marked clean
-v Be verbose
-b superblock Use alternative superblock
-B blocksize Force blocksize when looking for superblock
-j external_journal Set location of the external journal
-l bad_blocks_file Add to badblocks list
-L bad_blocks_file Set badblocks list
fsck died with exit status 16
failed!
* An automatic file system check (fsck) of the root filesystem failed.
A manual fsck must be performed, then the system restarted.
The fsck should be performed in maintenance mode with the
root filesystem mounted in read-only mode.
* The root filesystem is currently mounted in read-only mode.
A maintainance shell will now be started.
After performing system maintenance, press CONTROL-D
to terminate the maintenance shell and restart the system.
Give root password for maintenance
(or type Control-D to continue):
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (400, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17-maia
Locale: LANG=C, LC_CTYPE=de_DE at euro (charmap=ISO-8859-15)
Versions of packages sysvinit depends on:
hi initscripts 2.86.ds1-18 Scripts for initializing and shutt
ii libc6 2.3.6.ds1-4 GNU C Library: Shared libraries
ii libselinux1 1.30.27-2 SELinux shared libraries
ii libsepol1 1.12.26-1 Security Enhanced Linux policy lib
hi sysv-rc 2.86.ds1-18 System-V-like runlevel change mech
sysvinit recommends no packages.
-- no debconf information
-------------- next part --------------
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 31 248976 fd Linux raid autodetect
/dev/sda2 32 19457 156039345 5 Extended
/dev/sda5 32 19457 156039313+ fd Linux raid autodetect
Disk /dev/sdb: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 31 248976 fd Linux raid autodetect
/dev/sdb2 32 19457 156039345 5 Extended
/dev/sdb5 32 19457 156039313+ fd Linux raid autodetect
-------------- next part --------------
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
/dev/vg/root / ext3 defaults,errors=remount-ro 0 1
/dev/md0 /boot ext3 defaults 0 2
/dev/vg/tmp /tmp ext3 defaults 0 2
/dev/vg/swap none swap sw,loop=/dev/loop6,encryption=AES256 0 0
/dev/vg/home /home ext3 defaults 0 2
/dev/cdrom /media/cdrom iso9660 ro,user,noauto 0 0
/dev/dvd /media/dvd iso9660 ro,user,noauto 0 0
/dev/dvdrw /media/dvdrw iso9660 ro,user,noauto 0 0
/dev/fd0 /media/floppy auto rw,user,noauto 0 0
/dev/sdc1 /media/hd auto rw,user,noauto 0 0
merope:/mnt/disc0_1 /media/merope nfs rw,hard,lock,udp 0 0
/home /srv/chroot/sid-i386/home none bind 0 0
/root /srv/chroot/sid-i386/root none bind 0 0
/tmp /srv/chroot/sid-i386/tmp none bind 0 0
proc /srv/chroot/sid-i386/proc proc defaults 0 0
sysfs /srv/chroot/sid-i386/sys sysfs defaults 0 0
/dev /srv/chroot/sid-i386/dev none bind 0 0
-------------- next part --------------
--- Logical volume ---
LV Name /dev/vg/swap
VG Name vg
LV UUID 0gX2uR-GGci-NCi2-OX8S-H2sH-KwDJ-Epzrpn
LV Write Access read/write
LV Status available
# open 0
LV Size 2.00 GB
Current LE 512
Segments 1
Allocation contiguous
Read ahead sectors 0
Block device 253:0
--- Logical volume ---
LV Name /dev/vg/root
VG Name vg
LV UUID YW5ySg-6Igp-gT8S-lBxt-wai5-eWwu-Gsb02K
LV Write Access read/write
LV Status available
# open 1
LV Size 9.00 GB
Current LE 2304
Segments 1
Allocation contiguous
Read ahead sectors 0
Block device 253:1
--- Logical volume ---
LV Name /dev/vg/home
VG Name vg
LV UUID 6fQFMw-VG1m-YnXq-bAK6-5vxO-W1oy-M9eOFb
LV Write Access read/write
LV Status available
# open 0
LV Size 127.00 GB
Current LE 32512
Segments 1
Allocation contiguous
Read ahead sectors 0
Block device 253:2
--- Logical volume ---
LV Name /dev/vg/tmp
VG Name vg
LV UUID IwzJ3Y-atTV-N7u5-hh5d-4TgS-44e6-7WO7Ix
LV Write Access read/write
LV Status available
# open 0
LV Size 9.00 GB
Current LE 2304
Segments 1
Allocation inherit
Read ahead sectors 0
Block device 253:3
-------------- next part --------------
/dev/vg/root on / type ext3 (rw,errors=remount-ro)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
usbfs on /proc/bus/usb type usbfs (rw)
tmpfs on /dev/shm type tmpfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
tmpfs on /dev type tmpfs (rw,size=10M,mode=0755)
-------------- next part --------------
Personalities : [linear] [raid0] [raid1] [raid5] [raid4]
md1 : active raid1 sda5[0] sdb5[1]
156039232 blocks [2/2] [UU]
unused devices: <none>
-------------- next part --------------
rootfs / rootfs rw 0 0
/dev/mapper/vg-root / ext3 rw,data=ordered 0 0
proc /proc proc rw,nosuid,nodev,noexec 0 0
sysfs /sys sysfs rw,nosuid,nodev,noexec 0 0
usbfs /proc/bus/usb usbfs rw,nosuid,nodev,noexec 0 0
/dev/mapper/vg-root /dev/.static/dev ext3 rw,data=ordered 0 0
tmpfs /dev tmpfs rw 0 0
tmpfs /dev/shm tmpfs rw,nosuid,nodev,noexec 0 0
devpts /dev/pts devpts rw,nosuid,noexec 0 0
-------------- next part --------------
--- Volume group ---
VG Name vg
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 46
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 4
Open LV 1
Max PV 0
Cur PV 1
Act PV 1
VG Size 148.81 GB
PE Size 4.00 MB
Total PE 38095
Alloc PE / Size 37632 / 147.00 GB
Free PE / Size 463 / 1.81 GB
VG UUID A3HQrW-fzeH-0eL8-3hB1-E873-5UYs-YGhiAo
More information about the Pkg-sysvinit-devel
mailing list