[Pkg-sysvinit-devel] Bug#911176: Bug#911176: upgrade loops indefinitely

Tue Oct 16 21:17:49 BST 2018

On 16/10/2018 21:10, Petter Reinholdtsen wrote:
> 
> Note, it is unlikely the problem is in initscripts.  It is more likely
> to be an incorrect dependency in one of the other init.d scripts
> involved.  When it is known which, I recommend to reassign this bug to
> the correct package.
> 
> I further recommend to have a look at the output from
> /usr/share/insserv/check-initd-order, and to wrap up the output from
> /usr/share/insserv/make-testsuite as an attachment to this bug to allow
> anyone to try to reproduce the problem.
richard at deodand:~$ /usr/share/insserv/check-initd-order
richard at deodand:~$ /usr/share/insserv/make-testsuite > mt.txt

mt.txt is attached.

ttfn/rjk
-------------- next part --------------
set +C
cat <<'EOF' > $insconf
$local_fs	+mountall +mountall-bootclean +mountoverflowtmp +umountfs
$network	+networking +ifupdown
$named		+named +dnsmasq +lwresd +bind9 +unbound $network
$remote_fs	$local_fs +mountnfs +mountnfs-bootclean +umountnfs +sendsigs
$syslog		+rsyslog +sysklogd +syslog-ng +dsyslog +inetutils-syslogd
$time		+hwclock
<interactive>	glibc udev console-screen keymap keyboard-setup console-setup cryptdisks cryptdisks-early checkfs-loop
EOF
set -C

addscript anacron <<'EOF'
### BEGIN INIT INFO
# Provides:          anacron
# Required-Start:    $remote_fs $syslog $time
# Required-Stop:     $remote_fs $syslog $time
# Default-Start:     2 3 4 5
# Default-Stop:
# Short-Description: Run anacron jobs
# Description: The first purpose of this script is to run anacron at
#              boot so that it can catch up with missed jobs.  Note
#              that anacron is not a daemon.  It is run here just once
#              and is later started by the real cron.  The second
#              purpose of this script is that said cron job invokes
#              this script to start anacron at those subsequent times,
#              to keep the logic in one place.
### END INIT INFO
EOF

addscript apache2 <<'EOF'
### BEGIN INIT INFO
# Provides:          apache2
# Required-Start:    $local_fs $remote_fs $network $syslog $named
# Required-Stop:     $local_fs $remote_fs $network $syslog $named
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# X-Interactive:     true
# Short-Description: Apache2 web server
# Description:       Start the web server
#  This script will start the apache2 web server.
### END INIT INFO
EOF

addscript apache-htcacheclean <<'EOF'
### BEGIN INIT INFO
# Provides:          apache-htcacheclean
# Required-Start:    $remote_fs $syslog
# Required-Stop:     $remote_fs $syslog
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Cache cleaner process for Apache2 web server
# Description:       Start the htcacheclean helper
#  This script will start htcacheclean which will periodically scan the
#  cache directory of Apache2's mod_cache_disk and remove outdated files.
### END INIT INFO
EOF

addscript atd <<'EOF'
### BEGIN INIT INFO
# Provides:          atd
# Required-Start:    $syslog $time $remote_fs
# Required-Stop:     $syslog $time $remote_fs
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Deferred execution scheduler
# Description:       Debian init script for the atd deferred executions
#                    scheduler
### END INIT INFO
EOF

addscript binfmt-support <<'EOF'
### BEGIN INIT INFO
# Provides:          binfmt-support
# Required-Start:    $local_fs $remote_fs
# Required-Stop:     $local_fs $remote_fs
# Default-Start:     2 3 4 5
# Default-Stop:
# Short-Description: Support for extra binary formats
# Description:       Enable support for extra binary formats using the Linux
#                    kernel's binfmt_misc facility.
### END INIT INFO
EOF

addscript bootlogs <<'EOF'
### BEGIN INIT INFO
# Provides:          bootlogs
# Required-Start:    hostname $local_fs
# Required-Stop:
# Should-Start:      $x-display-manager gdm kdm xdm ldm sdm wdm nodm
# Default-Start:     1 2 3 4 5
# Default-Stop:
# Short-Description: Log file handling to be done during bootup.
# Description:       Various things that don't need to be done particularly
#                    early in the boot, just before getty is run.
### END INIT INFO
EOF

addscript bootmisc.sh <<'EOF'
### BEGIN INIT INFO
# Provides:          bootmisc
# Required-Start:    $remote_fs
# Required-Stop:
# Should-Start:      udev
# Default-Start:     S
# Default-Stop:
# Short-Description: Miscellaneous things to be done during bootup.
# Description:       Some cleanup.  Note, it need to run after mountnfs-bootclean.sh.
### END INIT INFO
EOF

addscript checkfs.sh <<'EOF'
### BEGIN INIT INFO
# Provides:          checkfs
# Required-Start:    checkroot
# Required-Stop:
# Should-Start:
# Default-Start:     S
# Default-Stop:
# X-Interactive:     true
# Short-Description: Check all filesystems.
### END INIT INFO
EOF

addscript checkroot-bootclean.sh <<'EOF'
### BEGIN INIT INFO
# Provides:          checkroot-bootclean
# Required-Start:    checkroot
# Required-Stop:
# Default-Start:     S
# Default-Stop:
# X-Start-Before:    bootmisc
# Short-Description: bootclean after checkroot.
# Description:       Clean temporary filesystems after
#                    the root filesystem has been mounted.
#                    At this point, directories which may be
#                    masked by future mounts may be cleaned.
### END INIT INFO
EOF

addscript checkroot.sh <<'EOF'
### BEGIN INIT INFO
# Provides:          checkroot mtab
# Required-Start:    mountdevsubfs hostname
# Required-Stop:     
# Should-Start:      keymap hwclockfirst hdparm bootlogd
# Should-stop:
# Default-Start:     S
# Default-Stop:
# X-Interactive:     true
# Short-Description: Check to root file system.
### END INIT INFO
EOF

addscript collectd <<'EOF'
### BEGIN INIT INFO
# Provides:          collectd
# Required-Start:    $local_fs $remote_fs
# Required-Stop:     $local_fs $remote_fs
# Should-Start:      $network $named $syslog $time cpufrequtils
# Should-Stop:       $network $named $syslog
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: manage the statistics collection daemon
# Description:       collectd is the statistics collection daemon.
#                    It is a small daemon which collects system information
#                    periodically and provides mechanisms to monitor and store
#                    the values in a variety of ways.
### END INIT INFO
EOF

addscript console-setup.sh <<'EOF'
### BEGIN INIT INFO
# Provides:          console-setup.sh
# Required-Start:    $remote_fs
# Required-Stop:
# Should-Start:      console-screen kbd
# Default-Start:     2 3 4 5
# Default-Stop:
# X-Interactive:     true
# Short-Description: Set console font and keymap
### END INIT INFO
EOF

addscript cron <<'EOF'
### BEGIN INIT INFO
# Provides:          cron
# Required-Start:    $remote_fs $syslog $time
# Required-Stop:     $remote_fs $syslog $time
# Should-Start:      $network $named slapd autofs ypbind nscd nslcd winbind sssd
# Should-Stop:       $network $named slapd autofs ypbind nscd nslcd winbind sssd
# Default-Start:     2 3 4 5
# Default-Stop:
# Short-Description: Regular background program processing daemon
# Description:       cron is a standard UNIX program that runs user-specified 
#                    programs at periodic scheduled times. vixie cron adds a 
#                    number of features to the basic UNIX cron, including better
#                    security and more powerful configuration options.
### END INIT INFO
EOF

addscript dbus <<'EOF'
### BEGIN INIT INFO
# Provides:          dbus
# Required-Start:    $remote_fs $syslog
# Required-Stop:     $remote_fs $syslog
# Default-Start:     2 3 4 5
# Default-Stop:
# Short-Description: D-Bus systemwide message bus
# Description:       D-Bus is a simple interprocess messaging system, used
#                    for sending messages between applications.
### END INIT INFO
EOF

addscript ekeyd-egd-linux <<'EOF'
### BEGIN INIT INFO
# Provides:          ekeyd-egd-linux
# Required-Start:    $remote_fs $network
# Required-Stop:     $remote_fs $network
# Should-Start:      ekeyd
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Entropy Key Manager, EGD->Linux pool stirrer
### END INIT INFO
EOF

addscript exim4 <<'EOF'
### BEGIN INIT INFO
# Provides:          exim4
# Required-Start:    $remote_fs $syslog $named $network $time
# Required-Stop:     $remote_fs $syslog $named $network
# Should-Start:      postgresql mysql clamav-daemon greylist spamassassin
# Should-Stop:       postgresql mysql clamav-daemon greylist spamassassin
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: exim Mail Transport Agent
# Description:       exim is a Mail Transport agent
### END INIT INFO
EOF

addscript halt <<'EOF'
### BEGIN INIT INFO
# Provides:          halt
# Required-Start:
# Required-Stop:
# Default-Start:
# Default-Stop:      0
# Short-Description: Execute the halt command.
# Description:
### END INIT INFO
EOF

addscript hostname.sh <<'EOF'
### BEGIN INIT INFO
# Provides:          hostname
# Required-Start:
# Required-Stop:
# Should-Start:      glibc
# Default-Start:     S
# Default-Stop:
# Short-Description: Set hostname based on /etc/hostname
# Description:       Read the machines hostname from /etc/hostname, and
#                    update the kernel value with this value.  If
#                    /etc/hostname is empty, the current kernel value
#                    for hostname is used.  If the kernel value is
#                    empty, the value 'localhost' is used.
### END INIT INFO
EOF

addscript hwclock.sh <<'EOF'
### BEGIN INIT INFO
# Provides:          hwclock
# Required-Start:    mountdevsubfs
# Required-Stop:     mountdevsubfs
# Should-Stop:       umountfs
# Default-Start:     S
# X-Start-Before:    checkroot
# Default-Stop:      0 6
# Short-Description: Sync hardware and system clock time.
### END INIT INFO
EOF

addscript inn2 <<'EOF'
### BEGIN INIT INFO
# Provides:          inn2
# Required-Start:    $local_fs $remote_fs $syslog
# Required-Stop:     $local_fs $remote_fs $syslog
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: INN news server
# Description:       The InterNetNews news server.
### END INIT INFO
EOF

addscript inn2~ <<'EOF'
### BEGIN INIT INFO
# Provides:          inn2
# Required-Start:    $local_fs $remote_fs $syslog
# Required-Stop:     $local_fs $remote_fs $syslog
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: INN news server
# Description:       The InterNetNews news server.
### END INIT INFO
EOF

addscript keyboard-setup.sh <<'EOF'
### BEGIN INIT INFO
# Provides:          keyboard-setup.sh
# Required-Start:    mountkernfs
# Required-Stop:
# X-Start-Before:    checkroot
# Default-Start:     S
# Default-Stop:
# X-Interactive:     true
# Short-Description: Set the console keyboard layout
# Description:       Set the console keyboard as early as possible
#                    so during the file systems checks the administrator
#                    can interact.  At this stage of the boot process
#                    only the ASCII symbols are supported.
### END INIT INFO
EOF

addscript killprocs <<'EOF'
### BEGIN INIT INFO
# Provides:          killprocs
# Required-Start:    $local_fs
# Required-Stop:
# Default-Start:     1
# Default-Stop:
# Short-Description: executed by init(8) upon entering runlevel 1 (single).
### END INIT INFO
EOF

addscript kmod <<'EOF'
### BEGIN INIT INFO
# Provides:          kmod
# Required-Start:    
# Required-Stop:     
# Should-Start:      checkroot
# Should-Stop:
# Default-Start:     S
# Default-Stop:
# Short-Description: Load the modules listed in /etc/modules.
# Description:       Load the modules listed in /etc/modules.
### END INIT INFO
EOF

addscript lvm2 <<'EOF'
### BEGIN INIT INFO
# Provides:          lvm2 lvm
# Required-Start:    mountdevsubfs
# Required-Stop:
# Should-Start:      udev mdadm-raid cryptdisks-early multipath-tools-boot
# Should-Stop:       umountroot mdadm-raid
# X-Start-Before:    checkfs mountall
# X-Stop-After:      umountfs
# Default-Start:     S
# Default-Stop:
### END INIT INFO
EOF

addscript lvm2-lvmetad <<'EOF'
### BEGIN INIT INFO
# Provides:          lvm2-lvmetad
# Required-Start:    $local_fs
# Required-Stop:     $local_fs
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: LVM2 metadata daemon
### END INIT INFO
EOF

addscript lvm2-lvmpolld <<'EOF'
### BEGIN INIT INFO
# Provides:          lvm2-lvmpolld
# Required-Start:    $local_fs
# Required-Stop:     $local_fs
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: LVM2 poll daemon
### END INIT INFO
EOF

addscript mdadm <<'EOF'
### BEGIN INIT INFO
# Provides:          mdadm
# Required-Start:    $local_fs $syslog
# Required-Stop:     $local_fs $syslog sendsigs 
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: MD monitoring daemon
# Description:       mdadm provides a monitor mode, in which it will scan for
#                    problems with the MD devices. If a problem is found, the
#                    administrator is alerted via email, or a custom script is
#                    run.
### END INIT INFO
EOF

addscript mdadm-waitidle <<'EOF'
### BEGIN INIT INFO
# Provides:          mdadm-waitidle
# Required-Start:
# Required-Stop:
# Should-Stop:       halt reboot kexec
# X-Stop-After:      umountroot
# Default-Start:
# Default-Stop:      0 6
# Short-Description: Wait for MD arrays to become idle
# Description:       Waits until all MD arrays are in idle and synced state
#                    before halt/reboot.
### END INIT INFO
EOF

addscript motd <<'EOF'
### BEGIN INIT INFO
# Provides:          motd
# Required-Start:    hostname $local_fs
# Required-Stop:
# Should-Start:
# Default-Start:     1 2 3 4 5
# Default-Stop:
# Short-Description: Create dynamic part of /etc/motd
# Description:       /etc/motd is user-editable and static.  This script
#                    creates the initial dynamic part, by default the
#                    output of uname, and stores it in /var/run/motd.dynamic.
#                    Both parts are output by pam_motd.
### END INIT INFO
EOF

addscript mountall-bootclean.sh <<'EOF'
### BEGIN INIT INFO
# Provides:          mountall-bootclean
# Required-Start:    mountall
# Required-Stop:
# Default-Start:     S
# Default-Stop:
# X-Start-Before:    bootmisc
# Short-Description: bootclean after mountall.
# Description:       Clean temporary filesystems after
#                    all local filesystems have been mounted.
### END INIT INFO
EOF

addscript mountall.sh <<'EOF'
### BEGIN INIT INFO
# Provides:          mountall
# Required-Start:    checkfs checkroot-bootclean
# Required-Stop: 
# Default-Start:     S
# Default-Stop:
# Short-Description: Mount all filesystems.
# Description:
### END INIT INFO
EOF

addscript mountdevsubfs.sh <<'EOF'
### BEGIN INIT INFO
# Provides:          mountdevsubfs
# Required-Start:    mountkernfs
# Required-Stop:
# Should-Start:      udev
# Default-Start:     S
# Default-Stop:
# Short-Description: Mount special file systems under /dev.
# Description:       Mount the virtual filesystems the kernel provides
#                    that ordinarily live under the /dev filesystem.
### END INIT INFO
EOF

addscript mountkernfs.sh <<'EOF'
### BEGIN INIT INFO
# Provides:          mountkernfs
# Required-Start:
# Required-Stop:
# Should-Start:      glibc
# Default-Start:     S
# Default-Stop:
# Short-Description: Mount kernel virtual file systems.
# Description:       Mount initial set of virtual filesystems the kernel
#                    provides and that are required by everything.
### END INIT INFO
EOF

addscript mountnfs-bootclean.sh <<'EOF'
### BEGIN INIT INFO
# Provides:          mountnfs-bootclean
# Required-Start:    $local_fs mountnfs
# Required-Stop:
# Default-Start:     S
# Default-Stop:
# X-Start-Before:    bootmisc
# Short-Description: bootclean after mountnfs.
# Description:       Clean temporary filesystems after
#                    network filesystems have been mounted.
### END INIT INFO
EOF

addscript mountnfs.sh <<'EOF'
### BEGIN INIT INFO
# Provides:          mountnfs
# Required-Start:    $local_fs
# Required-Stop:
# Should-Start:      $network $portmap nfs-common  udev-mtab
# Default-Start:     S
# Default-Stop:
# Short-Description: Wait for network file systems to be mounted
# Description:       Network file systems are mounted by
#                    /etc/network/if-up.d/mountnfs in the background
#                    when interfaces are brought up; this script waits
#                    for them to be mounted before carrying on.
### END INIT INFO
EOF

addscript nbd-client <<'EOF'
### BEGIN INIT INFO
# Provides: nbd-client
# Required-Start: $network $local_fs
# Required-Stop: $network
# Default-Start: S
# Default-Stop: 0 6
# X-Start-Before: mountnfs
# Short-Description: Network Block Device client
### END INIT INFO
EOF

addscript networking <<'EOF'
### BEGIN INIT INFO
# Provides:          networking ifupdown
# Required-Start:    mountkernfs $local_fs urandom
# Required-Stop:     $local_fs
# Default-Start:     S
# Default-Stop:      0 6
# Short-Description: Raise network interfaces.
# Description:       Prepare /run/network directory, ifstate file and raise network interfaces, or take them down.
### END INIT INFO
EOF

addscript nfs-common <<'EOF'
### BEGIN INIT INFO
# Provides:          nfs-common
# Required-Start:    $portmap $time
# Required-Stop:     $time
# Default-Start:     S
# Default-Stop:      0 1 6
# Short-Description: NFS support files common to client and server
# Description:       NFS is a popular protocol for file sharing across
#		     TCP/IP networks. This service provides various
#                    support functions for NFS mounts.
### END INIT INFO
EOF

addscript nmbd <<'EOF'
### BEGIN INIT INFO
# Provides:          nmbd
# Required-Start:    $network $local_fs $remote_fs
# Required-Stop:     $network $local_fs $remote_fs
# X-Start-Before:    smbd
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Samba NetBIOS nameserver (nmbd)
# Description: NetBIOS name server to provide NetBIOS over IP naming services
#              to clients
### END INIT INFO
EOF

addscript ntp <<'EOF'
### BEGIN INIT INFO
# Provides:        ntp
# Required-Start:  $network $remote_fs $syslog
# Required-Stop:   $network $remote_fs $syslog
# Default-Start:   2 3 4 5
# Default-Stop: 
# Short-Description: Start NTP daemon
### END INIT INFO
EOF

addscript pppd-dns <<'EOF'
### BEGIN INIT INFO
# Provides:          pppd-dns
# Required-Start:    $local_fs
# Required-Stop:
# Default-Start:     S
# Default-Stop:
# Short-Description: Restore resolv.conf if the system crashed.
# Description:       Restore /etc/resolv.conf if the system crashed before the
#                    ppp link was shut down.
### END INIT INFO
EOF

addscript procps <<'EOF'
### BEGIN INIT INFO
# Provides:          procps
# Required-Start:    mountkernfs $local_fs
# Required-Stop:
# Should-Start:      udev module-init-tools
# X-Start-Before:    $network
# Default-Start:     S
# Default-Stop:
# Short-Description: Configure kernel parameters at boottime
# Description:  Loads kernel parameters that are specified in /etc/sysctl.conf
### END INIT INFO
EOF

addscript racoon <<'EOF'
### BEGIN INIT INFO
# Provides:          racoon
# Required-Start:    $remote_fs setkey
# Required-Stop:     $remote_fs
# Should-Start:	     $portmap
# Should-Stop:	     $portmap
# Default-Start:     S
# Default-Stop:      0 1 6
# X-Stop-After:	     sendsigs
# Short-Description: start the ipsec key exchange server 
### END INIT INFO
EOF

addscript rc.local <<'EOF'
### BEGIN INIT INFO
# Provides:          rc.local
# Required-Start:    $all
# Required-Stop:
# Default-Start:     2 3 4 5
# Default-Stop:
# Short-Description: Run /etc/rc.local if it exist
### END INIT INFO
EOF

addscript reboot <<'EOF'
### BEGIN INIT INFO
# Provides:          reboot
# Required-Start:
# Required-Stop:
# Default-Start:
# Default-Stop:      6
# Short-Description: Execute the reboot command.
# Description:
### END INIT INFO
EOF

addscript rmnologin <<'EOF'
### BEGIN INIT INFO
# Provides:          rmnologin
# Required-Start:    $remote_fs $all
# Required-Stop: 
# Default-Start:     2 3 4 5
# Default-Stop:
# Short-Description: Remove /run/nologin at boot
# Description:       This script removes the /run/nologin file as the
#                    last step in the boot process, if DELAYLOGIN=yes.
#                    If DELAYLOGIN=no, /run/nologin was not created by
#                    bootmisc earlier in the boot process.
### END INIT INFO
EOF

addscript rpcbind <<'EOF'
### BEGIN INIT INFO
# Provides:          rpcbind
# Required-Start:    $network $local_fs
# Required-Stop:     $network $local_fs
# Default-Start:     S
# Default-Stop:      0 1 6
# Short-Description: RPC portmapper replacement
# Description:       rpcbind is a server that converts RPC (Remote
#                    Procedure Call) program numbers into DARPA
#                    protocol port numbers. It must be running in
#                    order to make RPC calls. Services that use
#                    RPC include NFS and NIS.
### END INIT INFO
EOF

addscript rsync <<'EOF'
### BEGIN INIT INFO
# Provides:          rsyncd
# Required-Start:    $remote_fs $syslog
# Required-Stop:     $remote_fs $syslog
# Should-Start:      $named autofs
# Default-Start:     2 3 4 5
# Default-Stop:      
# Short-Description: fast remote file copy program daemon
# Description:       rsync is a program that allows files to be copied to and
#                    from remote machines in much the same way as rcp.
#                    This provides rsyncd daemon functionality.
### END INIT INFO
EOF

addscript rsyslog <<'EOF'
### BEGIN INIT INFO
# Provides:          rsyslog
# Required-Start:    $remote_fs $time
# Required-Stop:     umountnfs $time
# X-Stop-After:      sendsigs
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: enhanced syslogd
# Description:       Rsyslog is an enhanced multi-threaded syslogd.
#                    It is quite compatible to stock sysklogd and can be 
#                    used as a drop-in replacement.
### END INIT INFO
EOF

addscript samba-ad-dc <<'EOF'
### BEGIN INIT INFO
# Provides:          samba-ad-dc
# Required-Start:    $network $local_fs $remote_fs
# Required-Stop:     $network $local_fs $remote_fs
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Samba daemons for the AD DC
# Description:  Meta-service to provide AD and SMB/CIFS services to clients
### END INIT INFO
EOF

addscript schroot <<'EOF'
### BEGIN INIT INFO
# Provides:          schroot
# Required-Start:    $local_fs $syslog $network $remote_fs
# Required-Stop:     $local_fs $syslog $network $remote_fs
# Should-Start:      lvm2
# Should-Stop:
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Recover schroot sessions.
# Description:       Activate any persistent sessions after a reboot.
#                    Setup scripts will be run to mount filesystems and
#                    bring the chroot back to a working state.
### END INIT INFO
EOF

addscript sendsigs <<'EOF'
### BEGIN INIT INFO
# Provides:          sendsigs
# Required-Start:    
# Required-Stop:     umountnfs
# Default-Start:
# Default-Stop:      0 6
# Short-Description: Kill all remaining processes.
# Description: 
### END INIT INFO
EOF

addscript setkey <<'EOF'
### BEGIN INIT INFO
# Provides:          setkey
# Required-Start:    $remote_fs
# Required-Stop:     $remote_fs
# Default-Start:     S
# Default-Stop:
# Short-Description: option to manually manipulate the IPsec SA/SP database 
### END INIT INFO
EOF

addscript single <<'EOF'
### BEGIN INIT INFO
# Provides:          single
# Required-Start:    $local_fs $all killprocs
# Required-Stop:
# Default-Start:     1
# Default-Stop:
# Short-Description: executed by init(8) upon entering runlevel 1 (single).
### END INIT INFO
EOF

addscript smbd <<'EOF'
### BEGIN INIT INFO
# Provides:          smbd
# Required-Start:    $network $local_fs $remote_fs
# Required-Stop:     $network $local_fs $remote_fs
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Should-Start:      slapd cups
# Should-Stop:       slapd cups
# Short-Description: Samba SMB/CIFS daemon (smbd)
# Description: server to provide SMB/CIFS services to clients
### END INIT INFO
EOF

addscript ssh <<'EOF'
### BEGIN INIT INFO
# Provides:		sshd
# Required-Start:	$remote_fs $syslog
# Required-Stop:	$remote_fs $syslog
# Default-Start:	2 3 4 5
# Default-Stop:		
# Short-Description:	OpenBSD Secure Shell server
### END INIT INFO
EOF

addscript udev <<'EOF'
### BEGIN INIT INFO
# Provides:          udev
# Required-Start:    mountkernfs
# Required-Stop:     umountroot
# Default-Start:     S
# Default-Stop:      0 6
# Short-Description: Start systemd-udevd, populate /dev and load drivers.
### END INIT INFO
EOF

addscript umountfs <<'EOF'
### BEGIN INIT INFO
# Provides:          umountfs
# Required-Start:
# Required-Stop:     umountroot
# Default-Start:
# Default-Stop:      0 6
# Short-Description: Turn off swap and unmount all local file systems.
# Description:
### END INIT INFO
EOF

addscript umountnfs.sh <<'EOF'
### BEGIN INIT INFO
# Provides:          umountnfs
# Required-Start:
# Required-Stop:     umountfs
# Should-Stop:       $network $portmap nfs-common
# Default-Start:
# Default-Stop:      0 6
# Short-Description: Unmount all network filesystems except the root fs.
# Description:       Also unmounts all virtual filesystems (proc,
#                    devpts, usbfs, sysfs) that are not mounted at the
#                    top level.
### END INIT INFO
EOF

addscript umountroot <<'EOF'
### BEGIN INIT INFO
# Provides:          umountroot
# Required-Start:
# Required-Stop:
# Should-Stop:       halt reboot kexec
# Default-Start:
# Default-Stop:      0 6
# Short-Description: Mount the root and /usr filesystems read-only.
### END INIT INFO
EOF

addscript urandom <<'EOF'
### BEGIN INIT INFO
# Provides:          urandom
# Required-Start:    $local_fs $time
# Required-Stop:     $local_fs
# Default-Start:     S
# Default-Stop:      0 6
# Short-Description: Save and restore random seed between restarts.
# Description:       This script saves the random seed between restarts.
#                    It is called from the boot, halt and reboot scripts.
### END INIT INFO
EOF

addscript uuidd <<'EOF'
### BEGIN INIT INFO
# Provides:          uuidd
# Required-Start:    $time $local_fs $remote_fs
# Required-Stop:     $time $local_fs $remote_fs
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: uuidd daemon
# Description:       Init script for the uuid generation daemon
### END INIT INFO
EOF

addscript x11-common <<'EOF'
### BEGIN INIT INFO
# Provides:          x11-common
# Required-Start:    $remote_fs
# Required-Stop:     $remote_fs
# Default-Start:     S
# Default-Stop:
# Short-Description: set up the X server and ICE socket directories
### END INIT INFO
EOF

addscript xrdp <<'EOF'
### BEGIN INIT INFO
# Provides:          xrdp
# Required-Start:    $remote_fs $syslog $network
# Required-Stop:     $remote_fs $syslog $network
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: xrdp (X Remote Desktop Protocol) full server
# Description:       The xrdp daemon uses the Remote Desktop Protocol
#                    to present a graphical login to a remote client,
#                    allowing connections to an xorgxrdp or VNC server
#                    or another RDP server. The xrdp-sesman daemon
#                    authenticates the users against PAM and starts
#                    the session and, if necessary, X11 server.
### END INIT INFO
EOF

cd $tmpdir/etc
mkdir rc0.d rc1.d rc2.d rc3.d rc4.d rc5.d rc6.d rcS.d
ln -s ../init.d/anacron rc0.d/K01anacron
ln -s ../init.d/apache2 rc0.d/K01apache2
ln -s ../init.d/apache-htcacheclean rc0.d/K01apache-htcacheclean
ln -s ../init.d/atd rc0.d/K01atd
ln -s ../init.d/collectd rc0.d/K01collectd
ln -s ../init.d/cron rc0.d/K01cron
ln -s ../init.d/ekeyd-egd-linux rc0.d/K01ekeyd-egd-linux
ln -s ../init.d/exim4 rc0.d/K01exim4
ln -s ../init.d/inn2 rc0.d/K01inn2
ln -s ../init.d/lvm2-lvmetad rc0.d/K01lvm2-lvmetad
ln -s ../init.d/lvm2-lvmpolld rc0.d/K01lvm2-lvmpolld
ln -s ../init.d/mdadm rc0.d/K01mdadm
ln -s ../init.d/nbd-client rc0.d/K01nbd-client
ln -s ../init.d/nmbd rc0.d/K01nmbd
ln -s ../init.d/samba-ad-dc rc0.d/K01samba-ad-dc
ln -s ../init.d/schroot rc0.d/K01schroot
ln -s ../init.d/smbd rc0.d/K01smbd
ln -s ../init.d/udev rc0.d/K01udev
ln -s ../init.d/urandom rc0.d/K01urandom
ln -s ../init.d/uuidd rc0.d/K01uuidd
ln -s ../init.d/xrdp rc0.d/K01xrdp
ln -s ../init.d/racoon rc0.d/K03racoon
ln -s ../init.d/rsyslog rc0.d/K03rsyslog
ln -s ../init.d/sendsigs rc0.d/K04sendsigs
ln -s ../init.d/umountnfs.sh rc0.d/K04umountnfs.sh
ln -s ../init.d/nfs-common rc0.d/K05nfs-common
ln -s ../init.d/rpcbind rc0.d/K05rpcbind
ln -s ../init.d/networking rc0.d/K06networking
ln -s ../init.d/umountfs rc0.d/K07umountfs
ln -s ../init.d/umountroot rc0.d/K08umountroot
ln -s ../init.d/mdadm-waitidle rc0.d/K09mdadm-waitidle
ln -s ../init.d/halt rc0.d/K10halt
ln -s ../init.d/anacron rc1.d/K01anacron
ln -s ../init.d/apache2 rc1.d/K01apache2
ln -s ../init.d/apache-htcacheclean rc1.d/K01apache-htcacheclean
ln -s ../init.d/atd rc1.d/K01atd
ln -s ../init.d/collectd rc1.d/K01collectd
ln -s ../init.d/cron rc1.d/K01cron
ln -s ../init.d/ekeyd-egd-linux rc1.d/K01ekeyd-egd-linux
ln -s ../init.d/exim4 rc1.d/K01exim4
ln -s ../init.d/inn2 rc1.d/K01inn2
ln -s ../init.d/lvm2-lvmetad rc1.d/K01lvm2-lvmetad
ln -s ../init.d/lvm2-lvmpolld rc1.d/K01lvm2-lvmpolld
ln -s ../init.d/mdadm rc1.d/K01mdadm
ln -s ../init.d/nmbd rc1.d/K01nmbd
ln -s ../init.d/samba-ad-dc rc1.d/K01samba-ad-dc
ln -s ../init.d/schroot rc1.d/K01schroot
ln -s ../init.d/smbd rc1.d/K01smbd
ln -s ../init.d/uuidd rc1.d/K01uuidd
ln -s ../init.d/xrdp rc1.d/K01xrdp
ln -s ../init.d/racoon rc1.d/K03racoon
ln -s ../init.d/rsyslog rc1.d/K03rsyslog
ln -s ../init.d/nfs-common rc1.d/K05nfs-common
ln -s ../init.d/rpcbind rc1.d/K05rpcbind
ln -s ../init.d/bootlogs rc1.d/S01bootlogs
ln -s ../init.d/killprocs rc1.d/S01killprocs
ln -s ../init.d/motd rc1.d/S01motd
ln -s ../init.d/single rc1.d/S02single
ln -s ../init.d/apache-htcacheclean rc2.d/K01apache-htcacheclean
ln -s ../init.d/bootlogs rc2.d/S01bootlogs
ln -s ../init.d/lvm2-lvmetad rc2.d/S01lvm2-lvmetad
ln -s ../init.d/lvm2-lvmpolld rc2.d/S01lvm2-lvmpolld
ln -s ../init.d/motd rc2.d/S01motd
ln -s ../init.d/nfs-common rc2.d/S13nfs-common
ln -s ../init.d/console-setup.sh rc2.d/S15console-setup.sh
ln -s ../init.d/binfmt-support rc2.d/S16binfmt-support
ln -s ../init.d/ekeyd-egd-linux rc2.d/S16ekeyd-egd-linux
ln -s ../init.d/nmbd rc2.d/S16nmbd
ln -s ../init.d/rsyslog rc2.d/S16rsyslog
ln -s ../init.d/samba-ad-dc rc2.d/S16samba-ad-dc
ln -s ../init.d/uuidd rc2.d/S16uuidd
ln -s ../init.d/apache2 rc2.d/S17apache2
ln -s ../init.d/anacron rc2.d/S18anacron
ln -s ../init.d/atd rc2.d/S18atd
ln -s ../init.d/collectd rc2.d/S18collectd
ln -s ../init.d/cron rc2.d/S18cron
ln -s ../init.d/dbus rc2.d/S18dbus
ln -s ../init.d/exim4 rc2.d/S18exim4
ln -s ../init.d/inn2 rc2.d/S18inn2
ln -s ../init.d/mdadm rc2.d/S18mdadm
ln -s ../init.d/ntp rc2.d/S18ntp
ln -s ../init.d/rsync rc2.d/S18rsync
ln -s ../init.d/schroot rc2.d/S18schroot
ln -s ../init.d/smbd rc2.d/S18smbd
ln -s ../init.d/ssh rc2.d/S18ssh
ln -s ../init.d/xrdp rc2.d/S18xrdp
ln -s ../init.d/rc.local rc2.d/S19rc.local
ln -s ../init.d/rmnologin rc2.d/S19rmnologin
ln -s ../init.d/apache-htcacheclean rc3.d/K01apache-htcacheclean
ln -s ../init.d/bootlogs rc3.d/S01bootlogs
ln -s ../init.d/lvm2-lvmetad rc3.d/S01lvm2-lvmetad
ln -s ../init.d/lvm2-lvmpolld rc3.d/S01lvm2-lvmpolld
ln -s ../init.d/motd rc3.d/S01motd
ln -s ../init.d/nfs-common rc3.d/S13nfs-common
ln -s ../init.d/console-setup.sh rc3.d/S15console-setup.sh
ln -s ../init.d/binfmt-support rc3.d/S16binfmt-support
ln -s ../init.d/ekeyd-egd-linux rc3.d/S16ekeyd-egd-linux
ln -s ../init.d/nmbd rc3.d/S16nmbd
ln -s ../init.d/rsyslog rc3.d/S16rsyslog
ln -s ../init.d/samba-ad-dc rc3.d/S16samba-ad-dc
ln -s ../init.d/uuidd rc3.d/S16uuidd
ln -s ../init.d/apache2 rc3.d/S17apache2
ln -s ../init.d/anacron rc3.d/S18anacron
ln -s ../init.d/atd rc3.d/S18atd
ln -s ../init.d/collectd rc3.d/S18collectd
ln -s ../init.d/cron rc3.d/S18cron
ln -s ../init.d/dbus rc3.d/S18dbus
ln -s ../init.d/exim4 rc3.d/S18exim4
ln -s ../init.d/inn2 rc3.d/S18inn2
ln -s ../init.d/mdadm rc3.d/S18mdadm
ln -s ../init.d/ntp rc3.d/S18ntp
ln -s ../init.d/rsync rc3.d/S18rsync
ln -s ../init.d/schroot rc3.d/S18schroot
ln -s ../init.d/smbd rc3.d/S18smbd
ln -s ../init.d/ssh rc3.d/S18ssh
ln -s ../init.d/xrdp rc3.d/S18xrdp
ln -s ../init.d/rc.local rc3.d/S19rc.local
ln -s ../init.d/rmnologin rc3.d/S19rmnologin
ln -s ../init.d/apache-htcacheclean rc4.d/K01apache-htcacheclean
ln -s ../init.d/bootlogs rc4.d/S01bootlogs
ln -s ../init.d/lvm2-lvmetad rc4.d/S01lvm2-lvmetad
ln -s ../init.d/lvm2-lvmpolld rc4.d/S01lvm2-lvmpolld
ln -s ../init.d/motd rc4.d/S01motd
ln -s ../init.d/nfs-common rc4.d/S13nfs-common
ln -s ../init.d/console-setup.sh rc4.d/S15console-setup.sh
ln -s ../init.d/binfmt-support rc4.d/S16binfmt-support
ln -s ../init.d/ekeyd-egd-linux rc4.d/S16ekeyd-egd-linux
ln -s ../init.d/nmbd rc4.d/S16nmbd
ln -s ../init.d/rsyslog rc4.d/S16rsyslog
ln -s ../init.d/samba-ad-dc rc4.d/S16samba-ad-dc
ln -s ../init.d/uuidd rc4.d/S16uuidd
ln -s ../init.d/apache2 rc4.d/S17apache2
ln -s ../init.d/anacron rc4.d/S18anacron
ln -s ../init.d/atd rc4.d/S18atd
ln -s ../init.d/collectd rc4.d/S18collectd
ln -s ../init.d/cron rc4.d/S18cron
ln -s ../init.d/dbus rc4.d/S18dbus
ln -s ../init.d/exim4 rc4.d/S18exim4
ln -s ../init.d/inn2 rc4.d/S18inn2
ln -s ../init.d/mdadm rc4.d/S18mdadm
ln -s ../init.d/ntp rc4.d/S18ntp
ln -s ../init.d/rsync rc4.d/S18rsync
ln -s ../init.d/schroot rc4.d/S18schroot
ln -s ../init.d/smbd rc4.d/S18smbd
ln -s ../init.d/ssh rc4.d/S18ssh
ln -s ../init.d/xrdp rc4.d/S18xrdp
ln -s ../init.d/rc.local rc4.d/S19rc.local
ln -s ../init.d/rmnologin rc4.d/S19rmnologin
ln -s ../init.d/apache-htcacheclean rc5.d/K01apache-htcacheclean
ln -s ../init.d/bootlogs rc5.d/S01bootlogs
ln -s ../init.d/lvm2-lvmetad rc5.d/S01lvm2-lvmetad
ln -s ../init.d/lvm2-lvmpolld rc5.d/S01lvm2-lvmpolld
ln -s ../init.d/motd rc5.d/S01motd
ln -s ../init.d/nfs-common rc5.d/S13nfs-common
ln -s ../init.d/console-setup.sh rc5.d/S15console-setup.sh
ln -s ../init.d/binfmt-support rc5.d/S16binfmt-support
ln -s ../init.d/ekeyd-egd-linux rc5.d/S16ekeyd-egd-linux
ln -s ../init.d/nmbd rc5.d/S16nmbd
ln -s ../init.d/rsyslog rc5.d/S16rsyslog
ln -s ../init.d/samba-ad-dc rc5.d/S16samba-ad-dc
ln -s ../init.d/uuidd rc5.d/S16uuidd
ln -s ../init.d/apache2 rc5.d/S17apache2
ln -s ../init.d/anacron rc5.d/S18anacron
ln -s ../init.d/atd rc5.d/S18atd
ln -s ../init.d/collectd rc5.d/S18collectd
ln -s ../init.d/cron rc5.d/S18cron
ln -s ../init.d/dbus rc5.d/S18dbus
ln -s ../init.d/exim4 rc5.d/S18exim4
ln -s ../init.d/inn2 rc5.d/S18inn2
ln -s ../init.d/mdadm rc5.d/S18mdadm
ln -s ../init.d/ntp rc5.d/S18ntp
ln -s ../init.d/rsync rc5.d/S18rsync
ln -s ../init.d/schroot rc5.d/S18schroot
ln -s ../init.d/smbd rc5.d/S18smbd
ln -s ../init.d/ssh rc5.d/S18ssh
ln -s ../init.d/xrdp rc5.d/S18xrdp
ln -s ../init.d/rc.local rc5.d/S19rc.local
ln -s ../init.d/rmnologin rc5.d/S19rmnologin
ln -s ../init.d/anacron rc6.d/K01anacron
ln -s ../init.d/apache2 rc6.d/K01apache2
ln -s ../init.d/apache-htcacheclean rc6.d/K01apache-htcacheclean
ln -s ../init.d/atd rc6.d/K01atd
ln -s ../init.d/collectd rc6.d/K01collectd
ln -s ../init.d/cron rc6.d/K01cron
ln -s ../init.d/ekeyd-egd-linux rc6.d/K01ekeyd-egd-linux
ln -s ../init.d/exim4 rc6.d/K01exim4
ln -s ../init.d/inn2 rc6.d/K01inn2
ln -s ../init.d/lvm2-lvmetad rc6.d/K01lvm2-lvmetad
ln -s ../init.d/lvm2-lvmpolld rc6.d/K01lvm2-lvmpolld
ln -s ../init.d/mdadm rc6.d/K01mdadm
ln -s ../init.d/nbd-client rc6.d/K01nbd-client
ln -s ../init.d/nmbd rc6.d/K01nmbd
ln -s ../init.d/samba-ad-dc rc6.d/K01samba-ad-dc
ln -s ../init.d/schroot rc6.d/K01schroot
ln -s ../init.d/smbd rc6.d/K01smbd
ln -s ../init.d/udev rc6.d/K01udev
ln -s ../init.d/urandom rc6.d/K01urandom
ln -s ../init.d/uuidd rc6.d/K01uuidd
ln -s ../init.d/xrdp rc6.d/K01xrdp
ln -s ../init.d/racoon rc6.d/K03racoon
ln -s ../init.d/rsyslog rc6.d/K03rsyslog
ln -s ../init.d/sendsigs rc6.d/K04sendsigs
ln -s ../init.d/umountnfs.sh rc6.d/K04umountnfs.sh
ln -s ../init.d/nfs-common rc6.d/K05nfs-common
ln -s ../init.d/rpcbind rc6.d/K05rpcbind
ln -s ../init.d/networking rc6.d/K06networking
ln -s ../init.d/umountfs rc6.d/K07umountfs
ln -s ../init.d/umountroot rc6.d/K08umountroot
ln -s ../init.d/mdadm-waitidle rc6.d/K09mdadm-waitidle
ln -s ../init.d/reboot rc6.d/K10reboot
ln -s ../init.d/hostname.sh rcS.d/S01hostname.sh
ln -s ../init.d/mountkernfs.sh rcS.d/S01mountkernfs.sh
ln -s ../init.d/udev rcS.d/S02udev
ln -s ../init.d/keyboard-setup.sh rcS.d/S03keyboard-setup.sh
ln -s ../init.d/mountdevsubfs.sh rcS.d/S04mountdevsubfs.sh
ln -s ../init.d/checkroot.sh rcS.d/S05checkroot.sh
ln -s ../init.d/checkroot-bootclean.sh rcS.d/S06checkroot-bootclean.sh
ln -s ../init.d/kmod rcS.d/S06kmod
ln -s ../init.d/lvm2 rcS.d/S06lvm2
ln -s ../init.d/checkfs.sh rcS.d/S07checkfs.sh
ln -s ../init.d/mountall.sh rcS.d/S08mountall.sh
ln -s ../init.d/mountall-bootclean.sh rcS.d/S09mountall-bootclean.sh
ln -s ../init.d/pppd-dns rcS.d/S10pppd-dns
ln -s ../init.d/procps rcS.d/S10procps
ln -s ../init.d/urandom rcS.d/S10urandom
ln -s ../init.d/networking rcS.d/S11networking
ln -s ../init.d/nbd-client rcS.d/S12nbd-client
ln -s ../init.d/rpcbind rcS.d/S12rpcbind
ln -s ../init.d/nfs-common rcS.d/S13nfs-common
ln -s ../init.d/mountnfs.sh rcS.d/S14mountnfs.sh
ln -s ../init.d/mountnfs-bootclean.sh rcS.d/S15mountnfs-bootclean.sh
ln -s ../init.d/bootmisc.sh rcS.d/S16bootmisc.sh
ln -s ../init.d/setkey rcS.d/S16setkey
ln -s ../init.d/x11-common rcS.d/S16x11-common
ln -s ../init.d/racoon rcS.d/S17racoon

list_rclinks