[Pkg-utopia-maintainers] Bug#489416: Bug#489416: network-manager: problems with killswitch on 2.6.26-rc8
Yves-Alexis Perez
corsac at debian.org
Tue Jul 8 05:34:36 UTC 2008
On sam, 2008-07-05 at 17:54 +0200, Michael Biebl wrote:
> Could you attach a lshal dump and the output of "hald --daemon=no
> --verbose=yes", please.
Run started hal-system-killswitch-get-power (0) (1)
! full path is '/usr/lib/hal/scripts/hal-system-killswitch-get-power',
program_dir is '/usr/lib/hal/scripts'
07:32:23.571 [I] device.c:1894: Removing locks from ':1.6950'
pid 6564: rc=1
signaled=0: /usr/lib/hal/scripts/hal-system-killswitch-get-power
07:32:23.573 [I] hald_dbus.c:4042: No more methods in queue
07:32:23.573 [I] hald_dbus.c:4105: failed with
'org.freedesktop.Hal.Device.KillSwitch.NotSupported'
'hal-ipw-killswitch-linux returned 255'
07:32:29.576 [I] hald_dbus.c:5127: OK for method 'GetPower' with
signature '' on interface 'org.freedesktop.Hal.Device.KillSwitch' for
UDI '/org/freedesktop/Hal/devices/ipw_wlan_switch' and execpath
'hal-system-killswitch-get-power'
07:32:29.576 [I] hald_dbus.c:4018: no need to enqueue
lshal.txt dump is attached. It seems not to happen directly after boot.
This morning it was triggered by modprobe -r iwl4965 / modprobe iwl4965
Cheers,
--
Yves-Alexis
-------------- next part --------------
Dumping 116 device(s) from the Global Device List:
-------------------------------------------------
udi = '/org/freedesktop/Hal/devices/computer'
info.addons = {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list)
info.callouts.add = {'hal-storage-cleanup-all-mountpoints'} (string list)
info.capabilities = {'cpufreq_control'} (string list)
info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement', 'org.freedesktop.Hal.Device.CPUFreq'} (string list)
info.product = 'Computer' (string)
info.subsystem = 'unknown' (string)
info.udi = '/org/freedesktop/Hal/devices/computer' (string)
org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'b'} (string list)
power_management.acpi.linux.version = '20080321' (string)
power_management.can_hibernate = true (bool)
power_management.can_suspend = true (bool)
power_management.can_suspend_hybrid = true (bool)
power_management.is_powersave_set = false (bool)
power_management.quirk.s3_bios = true (bool)
power_management.quirk.s3_mode = true (bool)
power_management.type = 'acpi' (string)
system.chassis.manufacturer = 'LENOVO' (string)
system.chassis.type = 'Notebook' (string)
system.firmware.release_date = '06/06/2008' (string)
system.firmware.vendor = 'LENOVO' (string)
system.firmware.version = '7LETB9WW (2.19 )' (string)
system.formfactor = 'laptop' (string)
system.hardware.primary_video.product = 10754 (0x2a02) (int)
system.hardware.primary_video.vendor = 32902 (0x8086) (int)
system.hardware.product = '8897CTO' (string)
system.hardware.serial = 'L3A4170' (string)
system.hardware.uuid = '9E8E6081-48E6-11CB-B15D-F58B0AE00FFF' (string)
system.hardware.vendor = 'LENOVO' (string)
system.hardware.version = 'ThinkPad T61' (string)
system.kernel.machine = 'x86_64' (string)
system.kernel.name = 'Linux' (string)
system.kernel.version = '2.6.26-rc8-amd64' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_5'
button.has_state = true (bool)
button.state.value = true (bool)
button.type = 'radio' (string)
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'hal-setup-keymap'} (string list)
info.capabilities = {'input', 'input.keys', 'input.switch', 'button', 'input.keymap'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'ThinkPad Extra Buttons' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_5' (string)
input.device = '/dev/input/event8' (string)
input.keymap.data = {'0x01:screenlock', '0x02:battery', '0x03:sleep', '0x04:radio', '0x06:switchvideomode', '0x07:f22', '0x08:f24', '0x0b:suspend', '0x0f:brightnessup', '0x10:brightnessdown', '0x11:kbdillumtoggle', '0x14:volumeup', '0x15:volumedown', '0x16:mute', '0x13:zoom', '0x17:vendor'} (string list)
input.product = 'ThinkPad Extra Buttons' (string)
input.xkb.layout = 'us' (string)
input.xkb.model = 'evdev' (string)
input.xkb.rules = 'base' (string)
input.xkb.variant = '' (string)
linux.device_file = '/dev/input/event8' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input11/event8' (string)
udi = '/org/freedesktop/Hal/devices/platform_thinkpad_acpi'
info.linux.driver = 'thinkpad_acpi' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (thinkpad_acpi)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_thinkpad_acpi' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/thinkpad_acpi' (string)
platform.id = 'thinkpad_acpi' (string)
udi = '/org/freedesktop/Hal/devices/thinkpad_bluetooth_switch'
info.capabilities = {'killswitch'} (string list)
info.category = 'killswitch' (string)
info.interfaces = {'org.freedesktop.Hal.Device.KillSwitch'} (string list)
info.parent = '/org/freedesktop/Hal/devices/platform_thinkpad_acpi' (string)
info.product = 'ThinkPad Bluetooth Switch' (string)
info.subsystem = 'unknown' (string)
info.udi = '/org/freedesktop/Hal/devices/thinkpad_bluetooth_switch' (string)
killswitch.access_method = 'thinkpad' (string)
killswitch.type = 'bluetooth' (string)
linux.sysfs_path = '/sys/devices/platform/thinkpad_acpi/bluetooth_enable' (string)
org.freedesktop.Hal.Device.KillSwitch.method_argnames = {'power', ''} (string list)
org.freedesktop.Hal.Device.KillSwitch.method_execpaths = {'hal-system-killswitch-set-power', 'hal-system-killswitch-get-power'} (string list)
org.freedesktop.Hal.Device.KillSwitch.method_names = {'SetPower', 'GetPower'} (string list)
org.freedesktop.Hal.Device.KillSwitch.method_signatures = {'b', ''} (string list)
udi = '/org/freedesktop/Hal/devices/platform_thinkpad_hwmon'
info.linux.driver = 'thinkpad_hwmon' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (thinkpad_hwmon)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_thinkpad_hwmon' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/thinkpad_hwmon' (string)
platform.id = 'thinkpad_hwmon' (string)
udi = '/org/freedesktop/Hal/devices/platform_bluetooth'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (bluetooth)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_bluetooth' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/bluetooth' (string)
platform.id = 'bluetooth' (string)
udi = '/org/freedesktop/Hal/devices/acpi_CPU0'
info.capabilities = {'processor'} (string list)
info.category = 'processor' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz' (string)
info.udi = '/org/freedesktop/Hal/devices/acpi_CPU0' (string)
linux.acpi_path = '/proc/acpi/processor/CPU0' (string)
linux.acpi_type = 1 (0x1) (int)
linux.hotplug_type = 4 (0x4) (int)
processor.can_throttle = true (bool)
processor.number = 0 (0x0) (int)
udi = '/org/freedesktop/Hal/devices/acpi_CPU1'
info.capabilities = {'processor'} (string list)
info.category = 'processor' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz' (string)
info.udi = '/org/freedesktop/Hal/devices/acpi_CPU1' (string)
linux.acpi_path = '/proc/acpi/processor/CPU1' (string)
linux.acpi_type = 1 (0x1) (int)
linux.hotplug_type = 4 (0x4) (int)
processor.can_throttle = true (bool)
processor.number = 1 (0x1) (int)
udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
alsa.device_file = '/dev/snd/timer' (string)
alsa.type = 'timer' (string)
info.capabilities = {'alsa'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'ALSA Timer Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' (string)
linux.device_file = '/dev/snd/timer' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/timer' (string)
udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT0'
battery.charge_level.current = 24690 (0x6072) (int)
battery.charge_level.design = 56160 (0xdb60) (int)
battery.charge_level.last_full = 52550 (0xcd46) (int)
battery.charge_level.percentage = 46 (0x2e) (int)
battery.charge_level.rate = 0 (0x0) (int)
battery.is_rechargeable = true (bool)
battery.model = 'COMPATIBLE' (string)
battery.present = true (bool)
battery.rechargeable.is_charging = false (bool)
battery.rechargeable.is_discharging = false (bool)
battery.reporting.current = 24690 (0x6072) (int)
battery.reporting.design = 56160 (0xdb60) (int)
battery.reporting.last_full = 52550 (0xcd46) (int)
battery.reporting.rate = 0 (0x0) (int)
battery.reporting.technology = 'Li-ion' (string)
battery.reporting.unit = 'mWh' (string)
battery.serial = ' 38' (string)
battery.technology = 'lithium-ion' (string)
battery.type = 'primary' (string)
battery.vendor = 'PSPSP' (string)
battery.voltage.current = 11465 (0x2cc9) (int)
battery.voltage.design = 10800 (0x2a30) (int)
battery.voltage.unit = 'mV' (string)
info.capabilities = {'battery'} (string list)
info.category = 'battery' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'COMPATIBLE' (string)
info.subsystem = 'power_supply' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'power_supply' (string)
linux.sysfs_path = '/sys/class/power_supply/BAT0' (string)
udi = '/org/freedesktop/Hal/devices/computer_power_supply_ac_adapter_AC'
ac_adapter.present = true (bool)
info.capabilities = {'ac_adapter'} (string list)
info.category = 'ac_adapter' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Generic AC Adapter Device' (string)
info.subsystem = 'power_supply' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_ac_adapter_AC' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'power_supply' (string)
linux.sysfs_path = '/sys/class/power_supply/AC' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_4'
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'input.keys', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Video Bus' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_4' (string)
input.device = '/dev/input/event7' (string)
input.product = 'Video Bus' (string)
input.xkb.layout = 'us' (string)
input.xkb.model = 'evdev' (string)
input.xkb.rules = 'base' (string)
input.xkb.variant = '' (string)
linux.device_file = '/dev/input/event7' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input7/event7' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3'
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'input.keys', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Video Bus' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3' (string)
input.device = '/dev/input/event5' (string)
input.product = 'Video Bus' (string)
input.xkb.layout = 'us' (string)
input.xkb.model = 'evdev' (string)
input.xkb.rules = 'base' (string)
input.xkb.variant = '' (string)
linux.device_file = '/dev/input/event5' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input5/event5' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2'
button.has_state = false (bool)
button.type = 'sleep' (string)
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Sleep Button (CM)' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' (string)
input.device = '/dev/input/event4' (string)
input.product = 'Sleep Button (CM)' (string)
linux.device_file = '/dev/input/event4' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input4/event4' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'
button.has_state = true (bool)
button.state.value = false (bool)
button.type = 'lid' (string)
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'input.switch', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Lid Switch' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' (string)
input.device = '/dev/input/event3' (string)
input.product = 'Lid Switch' (string)
linux.device_file = '/dev/input/event3' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input3/event3' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'
button.has_state = false (bool)
button.type = 'power' (string)
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Power Button (FF)' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' (string)
input.device = '/dev/input/event2' (string)
input.product = 'Power Button (FF)' (string)
linux.device_file = '/dev/input/event2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input2/event2' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'
info.capabilities = {'input', 'input.mouse'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Macintosh mouse button emulation' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' (string)
input.device = '/dev/input/event0' (string)
input.product = 'Macintosh mouse button emulation' (string)
linux.device_file = '/dev/input/event0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input0/event0' (string)
udi = '/org/freedesktop/Hal/devices/computer_backlight_0'
info.capabilities = {'laptop_panel'} (string list)
info.category = 'laptop_panel' (string)
info.interfaces = {'org.freedesktop.Hal.Device.LaptopPanel'} (string list)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Generic Backlight Device' (string)
info.subsystem = 'backlight' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_backlight_0' (string)
laptop_panel.access_method = 'general' (string)
laptop_panel.brightness_in_hardware = true (bool)
laptop_panel.num_levels = 16 (0x10) (int)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'backlight' (string)
linux.sysfs_path = '/sys/class/backlight/acpi_video1' (string)
org.freedesktop.Hal.Device.LaptopPanel.method_argnames = {'brightness_value', ''} (string list)
org.freedesktop.Hal.Device.LaptopPanel.method_execpaths = {'hal-system-lcd-set-brightness', 'hal-system-lcd-get-brightness'} (string list)
org.freedesktop.Hal.Device.LaptopPanel.method_names = {'SetBrightness', 'GetBrightness'} (string list)
org.freedesktop.Hal.Device.LaptopPanel.method_signatures = {'i', ''} (string list)
udi = '/org/freedesktop/Hal/devices/computer_backlight'
info.capabilities = {'laptop_panel'} (string list)
info.category = 'laptop_panel' (string)
info.interfaces = {'org.freedesktop.Hal.Device.LaptopPanel'} (string list)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Generic Backlight Device' (string)
info.subsystem = 'backlight' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_backlight' (string)
laptop_panel.access_method = 'general' (string)
laptop_panel.brightness_in_hardware = true (bool)
laptop_panel.num_levels = 16 (0x10) (int)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'backlight' (string)
linux.sysfs_path = '/sys/class/backlight/acpi_video0' (string)
org.freedesktop.Hal.Device.LaptopPanel.method_argnames = {'brightness_value', ''} (string list)
org.freedesktop.Hal.Device.LaptopPanel.method_execpaths = {'hal-system-lcd-set-brightness', 'hal-system-lcd-get-brightness'} (string list)
org.freedesktop.Hal.Device.LaptopPanel.method_names = {'SetBrightness', 'GetBrightness'} (string list)
org.freedesktop.Hal.Device.LaptopPanel.method_signatures = {'i', ''} (string list)
udi = '/org/freedesktop/Hal/devices/pnp_ATM1200'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PnP Device (ATM1200)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_ATM1200' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0a' (string)
pnp.id = 'ATM1200' (string)
udi = '/org/freedesktop/Hal/devices/pnp_IBM0057'
info.linux.driver = 'i8042 aux' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PnP Device (IBM0057)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_IBM0057' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:09' (string)
pnp.id = 'IBM0057' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
info.linux.driver = 'i8042 kbd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:08' (string)
pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string)
pnp.id = 'PNP0303' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AT Real-Time Clock' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:07' (string)
pnp.description = 'AT Real-Time Clock' (string)
pnp.id = 'PNP0b00' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Math Coprocessor' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:06' (string)
pnp.description = 'Math Coprocessor' (string)
pnp.id = 'PNP0c04' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AT-style speaker sound' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:05' (string)
pnp.description = 'AT-style speaker sound' (string)
pnp.id = 'PNP0800' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AT DMA Controller' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:04' (string)
pnp.description = 'AT DMA Controller' (string)
pnp.id = 'PNP0200' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0103'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PnP Device (PNP0103)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0103' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:03' (string)
pnp.id = 'PNP0103' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:02' (string)
pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
pnp.id = 'PNP0c02' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PnP Device (PNP0a08)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:01' (string)
pnp.id = 'PNP0a08' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'System Board' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:00' (string)
pnp.description = 'System Board' (string)
pnp.id = 'PNP0c01' (string)
udi = '/org/freedesktop/Hal/devices/platform_vesafb_0'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (vesafb.0)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_vesafb_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/vesafb.0' (string)
platform.id = 'vesafb.0' (string)
udi = '/org/freedesktop/Hal/devices/platform_uvesafb_0'
info.linux.driver = 'uvesafb' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (uvesafb.0)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_uvesafb_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/uvesafb.0' (string)
platform.id = 'uvesafb.0' (string)
udi = '/org/freedesktop/Hal/devices/platform_serial8250'
info.linux.driver = 'serial8250' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (serial8250)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_serial8250' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/serial8250' (string)
platform.id = 'serial8250' (string)
udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
info.linux.driver = 'pcspkr' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (pcspkr)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/pcspkr' (string)
platform.id = 'pcspkr' (string)
udi = '/org/freedesktop/Hal/devices/platform_iTCO_wdt'
info.linux.driver = 'iTCO_wdt' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (iTCO_wdt)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_iTCO_wdt' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/iTCO_wdt' (string)
platform.id = 'iTCO_wdt' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042'
info.linux.driver = 'i8042' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (i8042)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/i8042' (string)
platform.id = 'i8042' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'
info.linux.driver = 'psmouse' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string)
info.product = 'i8042 AUX port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio1' (string)
serio.description = 'i8042 AUX port' (string)
serio.id = 'serio1' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input'
info.capabilities = {'input', 'input.mouse'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string)
info.product = 'TPPS/2 IBM TrackPoint' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input' (string)
input.device = '/dev/input/event6' (string)
input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string)
input.product = 'TPPS/2 IBM TrackPoint' (string)
linux.device_file = '/dev/input/event6' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input6/event6' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'
info.linux.driver = 'atkbd' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string)
info.product = 'i8042 KBD port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio0' (string)
serio.description = 'i8042 KBD port' (string)
serio.id = 'serio0' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
info.product = 'AT Translated Set 2 keyboard' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' (string)
input.device = '/dev/input/event1' (string)
input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
input.product = 'AT Translated Set 2 keyboard' (string)
input.xkb.layout = 'us' (string)
input.xkb.model = 'evdev' (string)
input.xkb.rules = 'base' (string)
input.xkb.variant = '' (string)
linux.device_file = '/dev/input/event1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input1/event1' (string)
udi = '/org/freedesktop/Hal/devices/platform_dock_0'
info.docked = false (bool)
info.interfaces = {'org.freedesktop.Hal.Device.DockStation'} (string list)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (dock.0)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_dock_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/dock.0' (string)
org.freedesktop.Hal.Device.DockStation.method_argnames = {''} (string list)
org.freedesktop.Hal.Device.DockStation.method_execpaths = {'hal-dockstation-undock'} (string list)
org.freedesktop.Hal.Device.DockStation.method_names = {'Undock'} (string list)
org.freedesktop.Hal.Device.DockStation.method_signatures = {''} (string list)
platform.id = 'dock.0' (string)
udi = '/org/freedesktop/Hal/devices/platform_coretemp_1'
info.linux.driver = 'coretemp' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (coretemp.1)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_coretemp_1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/coretemp.1' (string)
platform.id = 'coretemp.1' (string)
udi = '/org/freedesktop/Hal/devices/platform_coretemp_0'
info.linux.driver = 'coretemp' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (coretemp.0)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_coretemp_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/coretemp.0' (string)
platform.id = 'coretemp.0' (string)
udi = '/org/freedesktop/Hal/devices/platform_bay_0'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (bay.0)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_bay_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/bay.0' (string)
platform.id = 'bay.0' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_283e'
info.linux.driver = 'i801_smbus' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) SMBus Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_283e' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 5 (0x5) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3' (string)
pci.product = '82801H (ICH8 Family) SMBus Controller' (string)
pci.product_id = 10302 (0x283e) (int)
pci.subsys_product_id = 8361 (0x20a9) (int)
pci.subsys_vendor = 'Lenovo' (string)
pci.subsys_vendor_id = 6058 (0x17aa) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2829'
info.linux.driver = 'ahci' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2829' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2' (string)
pci.device_class = 1 (0x1) (int)
pci.device_protocol = 1 (0x1) (int)
pci.device_subclass = 6 (0x6) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2' (string)
pci.product = '82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller' (string)
pci.product_id = 10281 (0x2829) (int)
pci.subsys_product_id = 8359 (0x20a7) (int)
pci.subsys_vendor = 'Lenovo' (string)
pci.subsys_vendor_id = 6058 (0x17aa) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2829_scsi_host'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2829' (string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2829_scsi_host' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0' (string)
scsi_host.host = 0 (0x0) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2829_scsi_host_scsi_device_lun0'
info.linux.driver = 'sd' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2829_scsi_host' (string)
info.product = 'SCSI Device' (string)
info.subsystem = 'scsi' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2829_scsi_host_scsi_device_lun0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0' (string)
scsi.bus = 0 (0x0) (int)
scsi.host = 0 (0x0) (int)
scsi.lun = 0 (0x0) (int)
scsi.model = 'HITACHI HTS54161' (string)
scsi.target = 0 (0x0) (int)
scsi.type = 'disk' (string)
scsi.vendor = 'ATA' (string)
udi = '/org/freedesktop/Hal/devices/storage_serial_S_SB2441GJHTVZXE'
block.device = '/dev/sda' (string)
block.is_volume = false (bool)
block.major = 8 (0x8) (int)
block.minor = 0 (0x0) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_S_SB2441GJHTVZXE' (string)
info.capabilities = {'storage', 'block'} (string list)
info.category = 'storage' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2829_scsi_host_scsi_device_lun0' (string)
info.product = 'HITACHI HTS54161' (string)
info.udi = '/org/freedesktop/Hal/devices/storage_serial_S_SB2441GJHTVZXE' (string)
info.vendor = 'ATA' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda' (string)
storage.automount_enabled_hint = true (bool)
storage.bus = 'scsi' (string)
storage.drive_type = 'disk' (string)
storage.firmware_version = 'SB4I' (string)
storage.hotpluggable = false (bool)
storage.lun = 0 (0x0) (int)
storage.media_check_enabled = false (bool)
storage.model = 'HITACHI HTS54161' (string)
storage.no_partitions_hint = false (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string)
storage.partitioning_scheme = 'mbr' (string)
storage.removable = false (bool)
storage.removable.media_available = true (bool)
storage.removable.media_size = 160041885696 (0x25433d6000) (uint64)
storage.requires_eject = false (bool)
storage.serial = 'S_SB2441GJHTVZXE' (string)
storage.size = 160041885696 (0x25433d6000) (uint64)
storage.vendor = 'ATA' (string)
udi = '/org/freedesktop/Hal/devices/volume_part_1_size_159783204352'
block.device = '/dev/dm-0' (string)
block.is_volume = true (bool)
block.major = 254 (0xfe) (int)
block.minor = 0 (0x0) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_S_SB2441GJHTVZXE' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_S_SB2441GJHTVZXE' (string)
info.product = 'Volume (LVM2_member)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_part_1_size_159783204352' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/dm-0' (string)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.crypto_luks.clear.backing_volume = '/org/freedesktop/Hal/devices/volume_uuid_dc5a13af_48af_44da_963e_114e40595dcf' (string)
volume.fstype = 'LVM2_member' (string)
volume.fsusage = 'raid' (string)
volume.fsversion = 'LVM2 001' (string)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = false (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = true (bool)
volume.mount_point = '' (string)
volume.num_blocks = 312076571 (0x1299e91b) (int)
volume.size = 159783204352 (0x2533d23600) (uint64)
volume.uuid = '' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_dc5a13af_48af_44da_963e_114e40595dcf'
block.device = '/dev/sda5' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 5 (0x5) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_S_SB2441GJHTVZXE' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume.Crypto'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_S_SB2441GJHTVZXE' (string)
info.product = 'Volume (crypto_LUKS)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_dc5a13af_48af_44da_963e_114e40595dcf' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda/sda5' (string)
org.freedesktop.Hal.Device.Volume.Crypto.method_argnames = {'passphrase', ''} (string list)
org.freedesktop.Hal.Device.Volume.Crypto.method_execpaths = {'hal-luks-setup', 'hal-luks-teardown'} (string list)
org.freedesktop.Hal.Device.Volume.Crypto.method_names = {'Setup', 'Teardown'} (string list)
org.freedesktop.Hal.Device.Volume.Crypto.method_signatures = {'s', ''} (string list)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'crypto_LUKS' (string)
volume.fsusage = 'crypto' (string)
volume.fsversion = '' (string)
volume.ignore = true (bool)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount_point = '' (string)
volume.num_blocks = 312078627 (0x1299f123) (int)
volume.partition.flags = {} (string list)
volume.partition.label = '' (string)
volume.partition.media_size = 160041885696 (0x25433d6000) (uint64)
volume.partition.number = 5 (0x5) (int)
volume.partition.scheme = 'embr' (string)
volume.partition.start = 255015936 (0xf333c00) (uint64)
volume.partition.type = '0x83' (string)
volume.partition.uuid = '' (string)
volume.size = 159784257024 (0x2533e24600) (uint64)
volume.uuid = 'dc5a13af-48af-44da-963e-114e40595dcf' (string)
udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024'
block.device = '/dev/sda2' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 2 (0x2) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_S_SB2441GJHTVZXE' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_S_SB2441GJHTVZXE' (string)
info.product = 'Volume' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda/sda2' (string)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = '' (string)
volume.fsusage = 'partitiontable' (string)
volume.fsversion = '' (string)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount_point = '' (string)
volume.num_blocks = 2 (0x2) (int)
volume.partition.flags = {} (string list)
volume.partition.label = '' (string)
volume.partition.media_size = 160041885696 (0x25433d6000) (uint64)
volume.partition.number = 2 (0x2) (int)
volume.partition.scheme = 'mbr' (string)
volume.partition.start = 254983680 (0xf32be00) (uint64)
volume.partition.type = '0x05' (string)
volume.partition.uuid = '' (string)
volume.size = 1024 (0x400) (uint64)
volume.uuid = '' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_c2b46edf_bbc0_42a6_ac2b_4b48de7579dc'
block.device = '/dev/sda1' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 1 (0x1) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_S_SB2441GJHTVZXE' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_S_SB2441GJHTVZXE' (string)
info.product = 'Volume (ext3)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_c2b46edf_bbc0_42a6_ac2b_4b48de7579dc' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda/sda1' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ext3' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '1.0' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list)
volume.mount_point = '/boot' (string)
volume.num_blocks = 497952 (0x79920) (int)
volume.partition.flags = {'boot'} (string list)
volume.partition.label = '' (string)
volume.partition.media_size = 160041885696 (0x25433d6000) (uint64)
volume.partition.number = 1 (0x1) (int)
volume.partition.scheme = 'mbr' (string)
volume.partition.start = 32256 (0x7e00) (uint64)
volume.partition.type = '0x83' (string)
volume.partition.uuid = '' (string)
volume.size = 254951424 (0xf324000) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = 'c2b46edf-bbc0-42a6-ac2b-4b48de7579dc' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_2850'
info.linux.driver = 'PIIX_IDE' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2850' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1' (string)
pci.device_class = 1 (0x1) (int)
pci.device_protocol = 138 (0x8a) (int)
pci.device_subclass = 1 (0x1) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1' (string)
pci.product = '82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller' (string)
pci.product_id = 10320 (0x2850) (int)
pci.subsys_product_id = 8358 (0x20a6) (int)
pci.subsys_vendor = 'Lenovo' (string)
pci.subsys_vendor_id = 6058 (0x17aa) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2850_ide_0_0'
ide.channel = 0 (0x0) (int)
ide.host = 0 (0x0) (int)
info.linux.driver = 'ide-cdrom' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2850' (string)
info.product = 'IDE device (master)' (string)
info.subsystem = 'ide' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2850_ide_0_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'ide' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/ide0/0.0' (string)
udi = '/org/freedesktop/Hal/devices/storage_serial_KZ479SH4331'
block.device = '/dev/hda' (string)
block.is_volume = false (bool)
block.major = 3 (0x3) (int)
block.minor = 0 (0x0) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_KZ479SH4331' (string)
info.addons = {'hald-addon-storage'} (string list)
info.capabilities = {'storage', 'block', 'storage.cdrom'} (string list)
info.category = 'storage' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2850_ide_0_0' (string)
info.product = 'HL-DT-ST DVDRAM GSA-U10N' (string)
info.udi = '/org/freedesktop/Hal/devices/storage_serial_KZ479SH4331' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/hda' (string)
org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list)
org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list)
org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list)
storage.automount_enabled_hint = true (bool)
storage.bus = 'ide' (string)
storage.cdrom.bd = false (bool)
storage.cdrom.bdr = false (bool)
storage.cdrom.bdre = false (bool)
storage.cdrom.cdr = true (bool)
storage.cdrom.cdrw = true (bool)
storage.cdrom.dvd = true (bool)
storage.cdrom.dvdplusr = true (bool)
storage.cdrom.dvdplusrdl = true (bool)
storage.cdrom.dvdplusrw = true (bool)
storage.cdrom.dvdplusrwdl = false (bool)
storage.cdrom.dvdr = true (bool)
storage.cdrom.dvdram = true (bool)
storage.cdrom.dvdrw = true (bool)
storage.cdrom.hddvd = false (bool)
storage.cdrom.hddvdr = false (bool)
storage.cdrom.hddvdrw = false (bool)
storage.cdrom.mo = false (bool)
storage.cdrom.mrw = true (bool)
storage.cdrom.mrw_w = true (bool)
storage.cdrom.read_speed = 4234 (0x108a) (int)
storage.cdrom.support_media_changed = true (bool)
storage.cdrom.support_multisession = true (bool)
storage.cdrom.write_speed = 4234 (0x108a) (int)
storage.cdrom.write_speeds = {'4234', '2823', '1764', '706'} (string list)
storage.drive_type = 'cdrom' (string)
storage.firmware_version = '1.05' (string)
storage.hotpluggable = false (bool)
storage.media_check_enabled = true (bool)
storage.model = 'HL-DT-ST DVDRAM GSA-U10N' (string)
storage.no_partitions_hint = true (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string)
storage.partitioning_scheme = '' (string)
storage.removable = true (bool)
storage.removable.media_available = false (bool)
storage.removable.support_async_notification = false (bool)
storage.requires_eject = true (bool)
storage.serial = 'KZ479SH4331' (string)
storage.size = 0 (0x0) (uint64)
storage.vendor = '' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_2811'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801HBM (ICH8M-E) LPC Interface Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2811' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 1 (0x1) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0' (string)
pci.product = '82801HBM (ICH8M-E) LPC Interface Controller' (string)
pci.product_id = 10257 (0x2811) (int)
pci.subsys_product_id = 8374 (0x20b6) (int)
pci.subsys_vendor = 'Lenovo' (string)
pci.subsys_vendor_id = 6058 (0x17aa) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2448'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801 Mobile PCI Bridge' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2448' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 1 (0x1) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0' (string)
pci.product = '82801 Mobile PCI Bridge' (string)
pci.product_id = 9288 (0x2448) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_1180_476'
info.linux.driver = 'yenta_cardbus' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string)
info.product = 'RL5c476 II' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1180_476' (string)
info.vendor = 'Ricoh Co Ltd' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:15:00.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 7 (0x7) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:15:00.0' (string)
pci.product = 'RL5c476 II' (string)
pci.product_id = 1142 (0x476) (int)
pci.subsys_product_id = 8388 (0x20c4) (int)
pci.subsys_vendor = 'Lenovo' (string)
pci.subsys_vendor_id = 6058 (0x17aa) (int)
pci.vendor = 'Ricoh Co Ltd' (string)
pci.vendor_id = 4480 (0x1180) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2836'
info.linux.driver = 'ehci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) USB2 EHCI Controller #1' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2836' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 32 (0x20) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7' (string)
pci.product = '82801H (ICH8 Family) USB2 EHCI Controller #1' (string)
pci.product_id = 10294 (0x2836) (int)
pci.subsys_product_id = 8363 (0x20ab) (int)
pci.subsys_vendor = 'Lenovo' (string)
pci.subsys_vendor_id = 6058 (0x17aa) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2836' (string)
info.product = '2.0 root hub' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' (string)
info.vendor = 'Linux Foundation' (string)
linux.device_file = '/dev/bus/usb/007/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb7' (string)
usb_device.bus_number = 7 (0x7) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb7' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 6 (0x6) (int)
usb_device.product = '2.0 root hub' (string)
usb_device.product_id = 2 (0x2) (int)
usb_device.serial = '0000:00:1d.7' (string)
usb_device.speed = 480.0 (480) (double)
usb_device.vendor = 'Linux Foundation' (string)
usb_device.vendor_id = 7531 (0x1d6b) (int)
usb_device.version = 2.0 (2) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' (string)
info.product = 'USB Raw Device Access' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_usbraw' (string)
linux.device_file = '/dev/bus/usb/007/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/class/usb_device/usbdev7.1' (string)
usbraw.device = '/dev/bus/usb/007/001' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0'
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb7/7-0:1.0' (string)
usb.bus_number = 7 (0x7) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb7/7-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 6 (0x6) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 2 (0x2) (int)
usb.serial = '0000:00:1d.7' (string)
usb.speed = 480.0 (480) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531 (0x1d6b) (int)
usb.version = 2.0 (2) (double)
udi = '/org/freedesktop/Hal/devices/pci_8086_2832'
info.linux.driver = 'uhci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) USB UHCI Controller #3' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2832' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2' (string)
pci.product = '82801H (ICH8 Family) USB UHCI Controller #3' (string)
pci.product_id = 10290 (0x2832) (int)
pci.subsys_product_id = 8362 (0x20aa) (int)
pci.subsys_vendor = 'Lenovo' (string)
pci.subsys_vendor_id = 6058 (0x17aa) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2832' (string)
info.product = '1.1 root hub' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2' (string)
info.vendor = 'Linux Foundation' (string)
linux.device_file = '/dev/bus/usb/006/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb6' (string)
usb_device.bus_number = 6 (0x6) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb6' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = '1.1 root hub' (string)
usb_device.product_id = 1 (0x1) (int)
usb_device.serial = '0000:00:1d.2' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.vendor = 'Linux Foundation' (string)
usb_device.vendor_id = 7531 (0x1d6b) (int)
usb_device.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2' (string)
info.product = 'USB Raw Device Access' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_usbraw' (string)
linux.device_file = '/dev/bus/usb/006/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/class/usb_device/usbdev6.1' (string)
usbraw.device = '/dev/bus/usb/006/001' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0'
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb6/6-0:1.0' (string)
usb.bus_number = 6 (0x6) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb6/6-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 1 (0x1) (int)
usb.serial = '0000:00:1d.2' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531 (0x1d6b) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/pci_8086_2831'
info.linux.driver = 'uhci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) USB UHCI Controller #2' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2831' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1' (string)
pci.product = '82801H (ICH8 Family) USB UHCI Controller #2' (string)
pci.product_id = 10289 (0x2831) (int)
pci.subsys_product_id = 8362 (0x20aa) (int)
pci.subsys_vendor = 'Lenovo' (string)
pci.subsys_vendor_id = 6058 (0x17aa) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2831' (string)
info.product = '1.1 root hub' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string)
info.vendor = 'Linux Foundation' (string)
linux.device_file = '/dev/bus/usb/005/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb5' (string)
usb_device.bus_number = 5 (0x5) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb5' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = '1.1 root hub' (string)
usb_device.product_id = 1 (0x1) (int)
usb_device.serial = '0000:00:1d.1' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.vendor = 'Linux Foundation' (string)
usb_device.vendor_id = 7531 (0x1d6b) (int)
usb_device.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string)
info.product = 'USB Raw Device Access' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_usbraw' (string)
linux.device_file = '/dev/bus/usb/005/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/class/usb_device/usbdev5.1' (string)
usbraw.device = '/dev/bus/usb/005/001' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0'
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb5/5-0:1.0' (string)
usb.bus_number = 5 (0x5) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb5/5-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 1 (0x1) (int)
usb.serial = '0000:00:1d.1' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531 (0x1d6b) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/pci_8086_2830'
info.linux.driver = 'uhci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) USB UHCI Controller #1' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2830' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0' (string)
pci.product = '82801H (ICH8 Family) USB UHCI Controller #1' (string)
pci.product_id = 10288 (0x2830) (int)
pci.subsys_product_id = 8362 (0x20aa) (int)
pci.subsys_vendor = 'Lenovo' (string)
pci.subsys_vendor_id = 6058 (0x17aa) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2830' (string)
info.product = '1.1 root hub' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0' (string)
info.vendor = 'Linux Foundation' (string)
linux.device_file = '/dev/bus/usb/004/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb4' (string)
usb_device.bus_number = 4 (0x4) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb4' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = '1.1 root hub' (string)
usb_device.product_id = 1 (0x1) (int)
usb_device.serial = '0000:00:1d.0' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.vendor = 'Linux Foundation' (string)
usb_device.vendor_id = 7531 (0x1d6b) (int)
usb_device.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0' (string)
info.product = 'USB Raw Device Access' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_usbraw' (string)
linux.device_file = '/dev/bus/usb/004/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/class/usb_device/usbdev4.1' (string)
usbraw.device = '/dev/bus/usb/004/001' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0'
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-0:1.0' (string)
usb.bus_number = 4 (0x4) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 1 (0x1) (int)
usb.serial = '0000:00:1d.0' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531 (0x1d6b) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/pci_8086_2847'
info.linux.driver = 'pcieport-driver' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) PCI Express Port 5' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2847' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.4' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.4' (string)
pci.product = '82801H (ICH8 Family) PCI Express Port 5' (string)
pci.product_id = 10311 (0x2847) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2845'
info.linux.driver = 'pcieport-driver' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) PCI Express Port 4' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2845' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.3' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.3' (string)
pci.product = '82801H (ICH8 Family) PCI Express Port 4' (string)
pci.product_id = 10309 (0x2845) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2843'
info.linux.driver = 'pcieport-driver' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) PCI Express Port 3' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2843' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.2' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.2' (string)
pci.product = '82801H (ICH8 Family) PCI Express Port 3' (string)
pci.product_id = 10307 (0x2843) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2841'
info.linux.driver = 'pcieport-driver' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) PCI Express Port 2' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2841' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1' (string)
pci.product = '82801H (ICH8 Family) PCI Express Port 2' (string)
pci.product_id = 10305 (0x2841) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_4230'
info.linux.driver = 'iwl4965' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2841' (string)
info.product = 'PRO/Wireless 4965 AG or AGN Network Connection' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_4230' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0' (string)
pci.device_class = 2 (0x2) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 128 (0x80) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0' (string)
pci.product = 'PRO/Wireless 4965 AG or AGN Network Connection' (string)
pci.product_id = 16944 (0x4230) (int)
pci.subsys_product_id = 4368 (0x1110) (int)
pci.subsys_vendor = 'Intel Corporation' (string)
pci.subsys_vendor_id = 32902 (0x8086) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_4230_logicaldev_input'
button.has_state = false (bool)
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_4230' (string)
info.product = '4965AGN' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_4230_logicaldev_input' (string)
input.device = '/dev/input/event9' (string)
input.originating_device = '/org/freedesktop/Hal/devices/pci_8086_4230' (string)
input.product = '4965AGN' (string)
linux.device_file = '/dev/input/event9' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input12/event9' (string)
udi = '/org/freedesktop/Hal/devices/net_00_13_e8_dc_ff_ab_0'
info.capabilities = {'net', 'net.80211'} (string list)
info.category = 'net.80211' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_4230' (string)
info.product = 'WLAN Interface' (string)
info.subsystem = 'net' (string)
info.udi = '/org/freedesktop/Hal/devices/net_00_13_e8_dc_ff_ab_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'net' (string)
linux.sysfs_path = '/sys/class/net/wlan0' (string)
net.80211.mac_address = 85511176107 (0x13e8dcffab) (uint64)
net.address = '00:13:e8:dc:ff:ab' (string)
net.arp_proto_hw_id = 1 (0x1) (int)
net.interface = 'wlan0' (string)
net.linux.ifindex = 6 (0x6) (int)
net.originating_device = '/org/freedesktop/Hal/devices/pci_8086_4230' (string)
udi = '/org/freedesktop/Hal/devices/net_00_13_e8_dc_ff_ab'
info.capabilities = {'net', 'net.80211control'} (string list)
info.category = 'net.80211control' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_4230' (string)
info.product = 'Networking Wireless Control Interface' (string)
info.subsystem = 'net' (string)
info.udi = '/org/freedesktop/Hal/devices/net_00_13_e8_dc_ff_ab' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'net' (string)
linux.sysfs_path = '/sys/class/net/wmaster0' (string)
net.address = '00:13:e8:dc:ff:ab' (string)
net.arp_proto_hw_id = 801 (0x321) (int)
net.interface = 'wmaster0' (string)
net.linux.ifindex = 5 (0x5) (int)
net.originating_device = '/org/freedesktop/Hal/devices/pci_8086_4230' (string)
udi = '/org/freedesktop/Hal/devices/ipw_wlan_switch'
info.capabilities = {'killswitch'} (string list)
info.category = 'killswitch' (string)
info.interfaces = {'org.freedesktop.Hal.Device.KillSwitch'} (string list)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_4230' (string)
info.product = 'Intel PRO/Wireless WLAN Switch' (string)
info.subsystem = 'unknown' (string)
info.udi = '/org/freedesktop/Hal/devices/ipw_wlan_switch' (string)
killswitch.access_method = 'ipw' (string)
killswitch.type = 'wlan' (string)
org.freedesktop.Hal.Device.KillSwitch.method_argnames = {'power', ''} (string list)
org.freedesktop.Hal.Device.KillSwitch.method_execpaths = {'hal-system-killswitch-set-power', 'hal-system-killswitch-get-power'} (string list)
org.freedesktop.Hal.Device.KillSwitch.method_names = {'SetPower', 'GetPower'} (string list)
org.freedesktop.Hal.Device.KillSwitch.method_signatures = {'b', ''} (string list)
udi = '/org/freedesktop/Hal/devices/pci_8086_283f'
info.linux.driver = 'pcieport-driver' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) PCI Express Port 1' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_283f' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0' (string)
pci.product = '82801H (ICH8 Family) PCI Express Port 1' (string)
pci.product_id = 10303 (0x283f) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_284b'
info.linux.driver = 'HDA Intel' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) HD Audio Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0' (string)
pci.device_class = 4 (0x4) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0' (string)
pci.product = '82801H (ICH8 Family) HD Audio Controller' (string)
pci.product_id = 10315 (0x284b) (int)
pci.subsys_product_id = 8364 (0x20ac) (int)
pci.subsys_vendor = 'Lenovo' (string)
pci.subsys_vendor_id = 6058 (0x17aa) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_284b_alsa_playback_1'
alsa.card = 0 (0x0) (int)
alsa.card_id = 'HDA Intel' (string)
alsa.device = 1 (0x1) (int)
alsa.device_file = '/dev/snd/pcmC0D1p' (string)
alsa.device_id = 'AD198x Digital' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
alsa.pcm_class = 'generic' (string)
alsa.type = 'playback' (string)
info.capabilities = {'alsa'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
info.product = 'AD198x Digital ALSA Playback Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_alsa_playback_1' (string)
linux.device_file = '/dev/snd/pcmC0D1p' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/pcmC0D1p' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_284b_alsa_playback_0'
alsa.card = 0 (0x0) (int)
alsa.card_id = 'HDA Intel' (string)
alsa.device = 0 (0x0) (int)
alsa.device_file = '/dev/snd/pcmC0D0p' (string)
alsa.device_id = 'AD198x Analog' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
alsa.pcm_class = 'generic' (string)
alsa.type = 'playback' (string)
info.capabilities = {'alsa'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
info.product = 'AD198x Analog ALSA Playback Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_alsa_playback_0' (string)
linux.device_file = '/dev/snd/pcmC0D0p' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/pcmC0D0p' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_284b_alsa_capture_0'
alsa.card = 0 (0x0) (int)
alsa.card_id = 'HDA Intel' (string)
alsa.device = 0 (0x0) (int)
alsa.device_file = '/dev/snd/pcmC0D0c' (string)
alsa.device_id = 'AD198x Analog' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
alsa.pcm_class = 'generic' (string)
alsa.type = 'capture' (string)
info.capabilities = {'alsa'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
info.product = 'AD198x Analog ALSA Capture Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_alsa_capture_0' (string)
linux.device_file = '/dev/snd/pcmC0D0c' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/pcmC0D0c' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_284b_oss_mixer__1'
info.capabilities = {'oss'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
info.product = 'AD198x Analog OSS Control Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_oss_mixer__1' (string)
linux.device_file = '/dev/mixer' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/mixer' (string)
oss.card = 0 (0x0) (int)
oss.card_id = 'HDA Intel' (string)
oss.device_file = '/dev/mixer' (string)
oss.device_id = 'AD198x Analog' (string)
oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
oss.type = 'mixer' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_284b_oss_pcm_0_0'
info.capabilities = {'oss'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
info.product = 'AD198x Analog OSS PCM Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_oss_pcm_0_0' (string)
linux.device_file = '/dev/dsp' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/dsp' (string)
oss.card = 0 (0x0) (int)
oss.card_id = 'HDA Intel' (string)
oss.device = 0 (0x0) (int)
oss.device_file = '/dev/dsp' (string)
oss.device_id = 'AD198x Analog' (string)
oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
oss.type = 'pcm' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_284b_alsa_control__1'
alsa.card = 0 (0x0) (int)
alsa.card_id = 'HDA Intel' (string)
alsa.device_file = '/dev/snd/controlC0' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
alsa.type = 'control' (string)
info.capabilities = {'alsa'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
info.product = 'HDA Intel ALSA Control Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_alsa_control__1' (string)
linux.device_file = '/dev/snd/controlC0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/controlC0' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_284b_oss_pcm_0'
info.capabilities = {'oss'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
info.product = 'AD198x Analog OSS PCM Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_oss_pcm_0' (string)
linux.device_file = '/dev/audio' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/audio' (string)
oss.card = 0 (0x0) (int)
oss.card_id = 'HDA Intel' (string)
oss.device = 0 (0x0) (int)
oss.device_file = '/dev/audio' (string)
oss.device_id = 'AD198x Analog' (string)
oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
oss.type = 'pcm' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_284b_oss_pcm_1'
info.capabilities = {'oss'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
info.product = 'AD198x Analog OSS PCM Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_oss_pcm_1' (string)
linux.device_file = '/dev/adsp' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/adsp' (string)
oss.card = 0 (0x0) (int)
oss.card_id = 'HDA Intel' (string)
oss.device = 1 (0x1) (int)
oss.device_file = '/dev/adsp' (string)
oss.device_id = 'AD198x Analog' (string)
oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
oss.type = 'pcm' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_283a'
info.linux.driver = 'ehci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) USB2 EHCI Controller #2' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_283a' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 32 (0x20) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7' (string)
pci.product = '82801H (ICH8 Family) USB2 EHCI Controller #2' (string)
pci.product_id = 10298 (0x283a) (int)
pci.subsys_product_id = 8363 (0x20ab) (int)
pci.subsys_vendor = 'Lenovo' (string)
pci.subsys_vendor_id = 6058 (0x17aa) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_283a' (string)
info.product = '2.0 root hub' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7' (string)
info.vendor = 'Linux Foundation' (string)
linux.device_file = '/dev/bus/usb/003/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb3' (string)
usb_device.bus_number = 3 (0x3) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb3' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 4 (0x4) (int)
usb_device.product = '2.0 root hub' (string)
usb_device.product_id = 2 (0x2) (int)
usb_device.serial = '0000:00:1a.7' (string)
usb_device.speed = 480.0 (480) (double)
usb_device.vendor = 'Linux Foundation' (string)
usb_device.vendor_id = 7531 (0x1d6b) (int)
usb_device.version = 2.0 (2) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7' (string)
info.product = 'USB Raw Device Access' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7_usbraw' (string)
linux.device_file = '/dev/bus/usb/003/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/class/usb_device/usbdev3.1' (string)
usbraw.device = '/dev/bus/usb/003/001' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7_if0'
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb3/3-0:1.0' (string)
usb.bus_number = 3 (0x3) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb3/3-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 4 (0x4) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 2 (0x2) (int)
usb.serial = '0000:00:1a.7' (string)
usb.speed = 480.0 (480) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531 (0x1d6b) (int)
usb.version = 2.0 (2) (double)
udi = '/org/freedesktop/Hal/devices/pci_8086_2835'
info.linux.driver = 'uhci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) USB UHCI Controller #5' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2835' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1' (string)
pci.product = '82801H (ICH8 Family) USB UHCI Controller #5' (string)
pci.product_id = 10293 (0x2835) (int)
pci.subsys_product_id = 8362 (0x20aa) (int)
pci.subsys_vendor = 'Lenovo' (string)
pci.subsys_vendor_id = 6058 (0x17aa) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_1'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2835' (string)
info.product = '1.1 root hub' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_1' (string)
info.vendor = 'Linux Foundation' (string)
linux.device_file = '/dev/bus/usb/002/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb2' (string)
usb_device.bus_number = 2 (0x2) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb2' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = '1.1 root hub' (string)
usb_device.product_id = 1 (0x1) (int)
usb_device.serial = '0000:00:1a.1' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.vendor = 'Linux Foundation' (string)
usb_device.vendor_id = 7531 (0x1d6b) (int)
usb_device.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_1_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_1' (string)
info.product = 'USB Raw Device Access' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_1_usbraw' (string)
linux.device_file = '/dev/bus/usb/002/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/class/usb_device/usbdev2.1' (string)
usbraw.device = '/dev/bus/usb/002/001' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_1_if0'
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_1' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_1_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-0:1.0' (string)
usb.bus_number = 2 (0x2) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 1 (0x1) (int)
usb.serial = '0000:00:1a.1' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531 (0x1d6b) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/pci_8086_2834'
info.linux.driver = 'uhci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) USB UHCI Controller #4' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2834' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0' (string)
pci.product = '82801H (ICH8 Family) USB UHCI Controller #4' (string)
pci.product_id = 10292 (0x2834) (int)
pci.subsys_product_id = 8362 (0x20aa) (int)
pci.subsys_vendor = 'Lenovo' (string)
pci.subsys_vendor_id = 6058 (0x17aa) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2834' (string)
info.product = '1.1 root hub' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0' (string)
info.vendor = 'Linux Foundation' (string)
linux.device_file = '/dev/bus/usb/001/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1' (string)
usb_device.bus_number = 1 (0x1) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = '1.1 root hub' (string)
usb_device.product_id = 1 (0x1) (int)
usb_device.serial = '0000:00:1a.0' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.vendor = 'Linux Foundation' (string)
usb_device.vendor_id = 7531 (0x1d6b) (int)
usb_device.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_483_2016_noserial_0'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0' (string)
info.product = 'Fingerprint Reader' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_483_2016_noserial_0' (string)
info.vendor = 'SGS Thomson Microelectronics' (string)
linux.device_file = '/dev/bus/usb/001/003' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-2' (string)
usb_device.bus_number = 1 (0x1) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 0 (0x0) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 1 (0x1) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = false (bool)
usb_device.linux.device_number = 3 (0x3) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-2' (string)
usb_device.max_power = 100 (0x64) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.product = 'Fingerprint Reader' (string)
usb_device.product_id = 8214 (0x2016) (int)
usb_device.speed = 12.0 (12) (double)
usb_device.vendor = 'SGS Thomson Microelectronics' (string)
usb_device.vendor_id = 1155 (0x483) (int)
usb_device.version = 1.0 (1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_483_2016_noserial_0_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_483_2016_noserial_0' (string)
info.product = 'USB Raw Device Access' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_483_2016_noserial_0_usbraw' (string)
linux.device_file = '/dev/bus/usb/001/003' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/class/usb_device/usbdev1.3' (string)
usbraw.device = '/dev/bus/usb/001/003' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_483_2016_noserial_0_if0'
info.parent = '/org/freedesktop/Hal/devices/usb_device_483_2016_noserial_0' (string)
info.product = 'USB Vendor Specific Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_483_2016_noserial_0_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-2/1-2:1.0' (string)
usb.bus_number = 1 (0x1) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 1 (0x1) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 255 (0xff) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 3 (0x3) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-2/1-2:1.0' (string)
usb.max_power = 100 (0x64) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Vendor Specific Interface' (string)
usb.product_id = 8214 (0x2016) (int)
usb.speed = 12.0 (12) (double)
usb.vendor = 'SGS Thomson Microelectronics' (string)
usb.vendor_id = 1155 (0x483) (int)
usb.version = 1.0 (1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0' (string)
info.product = 'USB Raw Device Access' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0_usbraw' (string)
linux.device_file = '/dev/bus/usb/001/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/class/usb_device/usbdev1.1' (string)
usbraw.device = '/dev/bus/usb/001/001' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_483_2016_noserial'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0' (string)
info.product = 'Fingerprint Reader' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_483_2016_noserial' (string)
info.vendor = 'SGS Thomson Microelectronics' (string)
linux.device_file = '/dev/bus/usb/001/002' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-2' (string)
usb_device.bus_number = 1 (0x1) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 0 (0x0) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 1 (0x1) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = false (bool)
usb_device.linux.device_number = 2 (0x2) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-2' (string)
usb_device.max_power = 100 (0x64) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.product = 'Fingerprint Reader' (string)
usb_device.product_id = 8214 (0x2016) (int)
usb_device.speed = 12.0 (12) (double)
usb_device.vendor = 'SGS Thomson Microelectronics' (string)
usb_device.vendor_id = 1155 (0x483) (int)
usb_device.version = 1.0 (1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0_if0'
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-0:1.0' (string)
usb.bus_number = 1 (0x1) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 1 (0x1) (int)
usb.serial = '0000:00:1a.0' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531 (0x1d6b) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/pci_8086_1049'
info.linux.driver = 'e1000e' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82566MM Gigabit Network Connection' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_1049' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:19.0' (string)
pci.device_class = 2 (0x2) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:19.0' (string)
pci.product = '82566MM Gigabit Network Connection' (string)
pci.product_id = 4169 (0x1049) (int)
pci.subsys_product_id = 8377 (0x20b9) (int)
pci.subsys_vendor = 'Lenovo' (string)
pci.subsys_vendor_id = 6058 (0x17aa) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/net_00_1a_6b_d2_4d_07'
info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list)
info.category = 'net.80203' (string)
info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_1049' (string)
info.product = 'Networking Interface' (string)
info.subsystem = 'net' (string)
info.udi = '/org/freedesktop/Hal/devices/net_00_1a_6b_d2_4d_07' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'net' (string)
linux.sysfs_path = '/sys/class/net/eth0' (string)
net.80203.mac_address = 113478094087 (0x1a6bd24d07) (uint64)
net.address = '00:1a:6b:d2:4d:07' (string)
net.arp_proto_hw_id = 1 (0x1) (int)
net.interface = 'eth0' (string)
net.linux.ifindex = 2 (0x2) (int)
net.originating_device = '/org/freedesktop/Hal/devices/pci_8086_1049' (string)
org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list)
org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list)
org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list)
org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list)
udi = '/org/freedesktop/Hal/devices/pci_8086_2a03'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Mobile GM965/GL960 Integrated Graphics Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2a03' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1' (string)
pci.device_class = 3 (0x3) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 128 (0x80) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1' (string)
pci.product = 'Mobile GM965/GL960 Integrated Graphics Controller' (string)
pci.product_id = 10755 (0x2a03) (int)
pci.subsys_product_id = 8373 (0x20b5) (int)
pci.subsys_vendor = 'Lenovo' (string)
pci.subsys_vendor_id = 6058 (0x17aa) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2a02'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Mobile GM965/GL960 Integrated Graphics Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2a02' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0' (string)
pci.device_class = 3 (0x3) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0' (string)
pci.product = 'Mobile GM965/GL960 Integrated Graphics Controller' (string)
pci.product_id = 10754 (0x2a02) (int)
pci.subsys_product_id = 8373 (0x20b5) (int)
pci.subsys_vendor = 'Lenovo' (string)
pci.subsys_vendor_id = 6058 (0x17aa) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2a02_drm_i915_card0'
drm.dri_library = 'i915' (string)
drm.version = 'drm 1.1.0 20060810' (string)
info.capabilities = {'drm'} (string list)
info.category = 'drm' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2a02' (string)
info.product = 'Direct Rendering Manager Device' (string)
info.subsystem = 'drm' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2a02_drm_i915_card0' (string)
info.vendor = 'Intel Corporation' (string)
linux.device_file = '/dev/dri/card0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'drm' (string)
linux.sysfs_path = '/sys/class/drm/card0' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_2a00'
info.linux.driver = 'agpgart-intel' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Mobile PM965/GM965/GL960 Memory Controller Hub' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2a00' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string)
pci.product = 'Mobile PM965/GM965/GL960 Memory Controller Hub' (string)
pci.product_id = 10752 (0x2a00) (int)
pci.subsys_product_id = 8371 (0x20b3) (int)
pci.subsys_vendor = 'Lenovo' (string)
pci.subsys_vendor_id = 6058 (0x17aa) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
Dumped 116 device(s) from the Global Device List.
------------------------------------------------
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 197 bytes
Desc: This is a digitally signed message part
Url : http://lists.alioth.debian.org/pipermail/pkg-utopia-maintainers/attachments/20080708/3d273484/attachment-0001.pgp
More information about the Pkg-utopia-maintainers
mailing list