[Pkg-utopia-maintainers] Bug#526952: Bug#526952: Bug#526952: network-manager: dies on startup
Johannes Rohr
jorohr at gmail.com
Wed May 6 12:44:16 UTC 2009
On Mi, Mai 06, 2009 at 02:24:49 +0200, Michael Biebl wrote:
[...]
> Could you also please send me the contents of /etc/network/interfaces,
> /etc/NetworkManager/nm-system-settings.conf and a "lshal" dump.
Please find them attached.
-------------- next part --------------
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
#auto eth1
iface eth1 inet dhcp
-------------- next part --------------
[main]
plugins=ifupdown,keyfile
[ifupdown]
managed=true
-------------- next part --------------
Dumping 121 device(s) from the Global Device List:
-------------------------------------------------
udi = '/org/freedesktop/Hal/devices/computer'
info.addons = {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list)
info.callouts.add = {'hal-acl-tool --remove-all', 'hal-storage-cleanup-all-mountpoints'} (string list)
info.callouts.session_active = {'hal-acl-tool --reconfigure'} (string list)
info.callouts.session_add = {'hal-acl-tool --reconfigure'} (string list)
info.callouts.session_inactive = {'hal-acl-tool --reconfigure'} (string list)
info.callouts.session_remove = {'hal-acl-tool --reconfigure'} (string list)
info.capabilities = {'cpufreq_control'} (string list)
info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement', 'org.freedesktop.Hal.Device.CPUFreq'} (string list)
info.product = 'Computer' (string)
info.subsystem = 'unknown' (string)
info.udi = '/org/freedesktop/Hal/devices/computer' (string)
org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'b'} (string list)
power_management.acpi.linux.version = '20081204' (string)
power_management.can_hibernate = true (bool)
power_management.can_suspend = true (bool)
power_management.can_suspend_hybrid = false (bool)
power_management.is_powersave_set = false (bool)
power_management.quirk.none = true (bool)
power_management.type = 'acpi' (string)
system.board.product = 'CAPELL VALLEY(NAPA) CRB' (string)
system.board.serial = '41W8025Z1ZCZ977W1F9' (string)
system.board.vendor = 'LENOVO' (string)
system.board.version = 'Not Applicable' (string)
system.chassis.manufacturer = 'No Enclosure' (string)
system.chassis.type = 'Notebook' (string)
system.firmware.release_date = '04/30/07' (string)
system.firmware.vendor = 'LENOVO' (string)
system.firmware.version = '63ET62WW' (string)
system.formfactor = 'laptop' (string)
system.hardware.primary_video.product = 10146 (0x27a2) (int)
system.hardware.primary_video.vendor = 32902 (0x8086) (int)
system.hardware.product = '0768BYG' (string)
system.hardware.serial = 'L3RN600' (string)
system.hardware.uuid = '78CF042C-324C-11DC-8C32-001B38090B65' (string)
system.hardware.vendor = 'LENOVO' (string)
system.hardware.version = '3000 N100' (string)
system.kernel.machine = 'i686' (string)
system.kernel.name = 'Linux' (string)
system.kernel.version = '2.6.29-1-686' (string)
system.kernel.version.major = 2 (0x2) (int)
system.kernel.version.micro = 29 (0x1d) (int)
system.kernel.version.minor = 6 (0x6) (int)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'input.keys', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Video Bus' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' (string)
input.device = '/dev/input/event4' (string)
input.product = 'Video Bus' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'de' (string)
input.xkb.model = 'pc105' (string)
input.xkb.options = 'lv3:ralt_switch,compose:rctrl' (string)
input.xkb.rules = 'base' (string)
linux.device_file = '/dev/input/event4' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/input/input4/event4' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2'
button.has_state = true (bool)
button.state.value = false (bool)
button.type = 'lid' (string)
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'input.switch', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Lid Switch' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' (string)
input.device = '/dev/input/event2' (string)
input.product = 'Lid Switch' (string)
linux.device_file = '/dev/input/event2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2/event2' (string)
udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
access_control.file = '/dev/snd/timer' (string)
access_control.type = 'sound' (string)
alsa.device_file = '/dev/snd/timer' (string)
alsa.type = 'timer' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'ALSA Timer Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' (string)
linux.device_file = '/dev/snd/timer' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/virtual/sound/timer' (string)
udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0'
access_control.file = '/dev/sequencer2' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'OSS Sequencer Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' (string)
linux.device_file = '/dev/sequencer2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/virtual/sound/sequencer2' (string)
oss.device_file = '/dev/sequencer2' (string)
oss.type = 'sequencer' (string)
udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer'
access_control.file = '/dev/sequencer' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'OSS Sequencer Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' (string)
linux.device_file = '/dev/sequencer' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/virtual/sound/sequencer' (string)
oss.device_file = '/dev/sequencer' (string)
oss.type = 'sequencer' (string)
udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'
access_control.file = '/dev/snd/seq' (string)
access_control.type = 'sound' (string)
alsa.device_file = '/dev/snd/seq' (string)
alsa.type = 'sequencer' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'ALSA Sequencer Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' (string)
linux.device_file = '/dev/snd/seq' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/virtual/sound/seq' (string)
udi = '/org/freedesktop/Hal/devices/acpi_CPU0'
info.capabilities = {'processor'} (string list)
info.category = 'processor' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Intel(R) Core(TM) Duo CPU T2450 @ 2.00GHz' (string)
info.udi = '/org/freedesktop/Hal/devices/acpi_CPU0' (string)
linux.acpi_path = '/proc/acpi/processor/CPU0' (string)
linux.acpi_type = 1 (0x1) (int)
linux.hotplug_type = 4 (0x4) (int)
processor.can_throttle = true (bool)
processor.number = 0 (0x0) (int)
udi = '/org/freedesktop/Hal/devices/acpi_CPU1'
info.capabilities = {'processor'} (string list)
info.category = 'processor' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Intel(R) Core(TM) Duo CPU T2450 @ 2.00GHz' (string)
info.udi = '/org/freedesktop/Hal/devices/acpi_CPU1' (string)
linux.acpi_path = '/proc/acpi/processor/CPU1' (string)
linux.acpi_type = 1 (0x1) (int)
linux.hotplug_type = 4 (0x4) (int)
processor.can_throttle = true (bool)
processor.number = 1 (0x1) (int)
udi = '/org/freedesktop/Hal/devices/net_00_76_62_6e_65_74'
info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list)
info.category = 'net.80203' (string)
info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Networking Interface' (string)
info.subsystem = 'net' (string)
info.udi = '/org/freedesktop/Hal/devices/net_00_76_62_6e_65_74' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'net' (string)
linux.sysfs_path = '/sys/devices/virtual/net/vboxnet0' (string)
net.80203.mac_address = 508457543028 (0x76626e6574) (uint64)
net.address = '00:76:62:6e:65:74' (string)
net.arp_proto_hw_id = 1 (0x1) (int)
net.interface = 'vboxnet0' (string)
net.linux.ifindex = 6 (0x6) (int)
net.originating_device = '/org/freedesktop/Hal/devices/computer' (string)
org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list)
org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list)
org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list)
org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list)
udi = '/org/freedesktop/Hal/devices/net_computer_loopback'
info.capabilities = {'net', 'net.loopback'} (string list)
info.category = 'net.loopback' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Loopback device Interface' (string)
info.subsystem = 'net' (string)
info.udi = '/org/freedesktop/Hal/devices/net_computer_loopback' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'net' (string)
linux.sysfs_path = '/sys/devices/virtual/net/lo' (string)
net.address = '00:00:00:00:00:00' (string)
net.arp_proto_hw_id = 772 (0x304) (int)
net.interface = 'lo' (string)
net.linux.ifindex = 1 (0x1) (int)
net.originating_device = '/org/freedesktop/Hal/devices/computer' (string)
udi = '/org/freedesktop/Hal/devices/computer_backlight'
info.addons = {'hald-addon-generic-backlight'} (string list)
info.capabilities = {'laptop_panel'} (string list)
info.category = 'laptop_panel' (string)
info.interfaces = {'org.freedesktop.Hal.Device.LaptopPanel'} (string list)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Generic Backlight Device' (string)
info.subsystem = 'backlight' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_backlight' (string)
laptop_panel.access_method = 'general' (string)
laptop_panel.brightness_in_hardware = true (bool)
laptop_panel.num_levels = 8 (0x8) (int)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'backlight' (string)
linux.sysfs_path = '/sys/devices/virtual/backlight/acpi_video0' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'
button.has_state = false (bool)
button.type = 'power' (string)
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Power Button (CM)' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' (string)
input.device = '/dev/input/event3' (string)
input.product = 'Power Button (CM)' (string)
linux.device_file = '/dev/input/event3' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3' (string)
udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT1'
battery.charge_level.current = 52170 (0xcbca) (int)
battery.charge_level.design = 52170 (0xcbca) (int)
battery.charge_level.last_full = 52170 (0xcbca) (int)
battery.charge_level.percentage = 100 (0x64) (int)
battery.charge_level.rate = 0 (0x0) (int)
battery.is_rechargeable = true (bool)
battery.model = 'PABAS024' (string)
battery.present = true (bool)
battery.rechargeable.is_charging = false (bool)
battery.rechargeable.is_discharging = false (bool)
battery.reporting.current = 4700 (0x125c) (int)
battery.reporting.design = 4700 (0x125c) (int)
battery.reporting.last_full = 4700 (0x125c) (int)
battery.reporting.rate = 0 (0x0) (int)
battery.reporting.technology = 'Li-ion' (string)
battery.reporting.unit = 'mAh' (string)
battery.serial = '3658Q' (string)
battery.technology = 'lithium-ion' (string)
battery.type = 'primary' (string)
battery.vendor = 'SANYO' (string)
battery.voltage.current = 11100 (0x2b5c) (int)
battery.voltage.design = 11100 (0x2b5c) (int)
battery.voltage.unit = 'mV' (string)
info.capabilities = {'battery'} (string list)
info.category = 'battery' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PABAS024' (string)
info.subsystem = 'power_supply' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'power_supply' (string)
linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:14/PNP0C0A:00/power_supply/BAT1' (string)
udi = '/org/freedesktop/Hal/devices/computer_power_supply_ac_adapter_ACAD'
ac_adapter.present = true (bool)
info.capabilities = {'ac_adapter'} (string list)
info.category = 'ac_adapter' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Generic AC Adapter Device' (string)
info.subsystem = 'power_supply' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_ac_adapter_ACAD' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'power_supply' (string)
linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:14/ACPI0003:00/power_supply/ACAD' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'
button.has_state = false (bool)
button.type = 'power' (string)
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Power Button (FF)' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' (string)
input.device = '/dev/input/event1' (string)
input.product = 'Power Button (FF)' (string)
linux.device_file = '/dev/input/event1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13'
info.linux.driver = 'i8042 aux' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PS/2 Port for PS/2-style Mice' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0a' (string)
pnp.description = 'PS/2 Port for PS/2-style Mice' (string)
pnp.id = 'PNP0f13' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
info.linux.driver = 'i8042 kbd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:09' (string)
pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string)
pnp.id = 'PNP0303' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
info.linux.driver = 'rtc_cmos' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AT Real-Time Clock' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:08' (string)
pnp.description = 'AT Real-Time Clock' (string)
pnp.id = 'PNP0b00' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:07' (string)
pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
pnp.id = 'PNP0c02' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:06' (string)
pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
pnp.id = 'PNP0c02' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Math Coprocessor' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:05' (string)
pnp.description = 'Math Coprocessor' (string)
pnp.id = 'PNP0c04' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0103'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PnP Device (PNP0103)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0103' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:04' (string)
pnp.id = 'PNP0103' (string)
udi = '/org/freedesktop/Hal/devices/pnp_INT0800'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PnP Device (INT0800)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_INT0800' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:03' (string)
pnp.id = 'INT0800' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AT DMA Controller' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:02' (string)
pnp.description = 'AT DMA Controller' (string)
pnp.id = 'PNP0200' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:01' (string)
pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
pnp.id = 'PNP0c02' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PnP Device (PNP0a08)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:00' (string)
pnp.id = 'PNP0a08' (string)
udi = '/org/freedesktop/Hal/devices/platform_vesafb_0'
info.linux.driver = 'vesafb' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (vesafb.0)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_vesafb_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/vesafb.0' (string)
platform.id = 'vesafb.0' (string)
udi = '/org/freedesktop/Hal/devices/platform_vboxdrv_0'
info.linux.driver = 'vboxdrv' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (vboxdrv.0)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_vboxdrv_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/vboxdrv.0' (string)
platform.id = 'vboxdrv.0' (string)
udi = '/org/freedesktop/Hal/devices/platform_serial8250'
info.linux.driver = 'serial8250' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (serial8250)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_serial8250' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/serial8250' (string)
platform.id = 'serial8250' (string)
udi = '/org/freedesktop/Hal/devices/platform_regulatory_0'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (regulatory.0)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_regulatory_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/regulatory.0' (string)
platform.id = 'regulatory.0' (string)
udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
info.linux.driver = 'pcspkr' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (pcspkr)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/pcspkr' (string)
platform.id = 'pcspkr' (string)
udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'
info.capabilities = {'input'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_pcspkr' (string)
info.product = 'PC Speaker' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input' (string)
input.device = '/dev/input/event5' (string)
input.originating_device = '/org/freedesktop/Hal/devices/platform_pcspkr' (string)
input.product = 'PC Speaker' (string)
linux.device_file = '/dev/input/event5' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/platform/pcspkr/input/input5/event5' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042'
info.linux.driver = 'i8042' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (i8042)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/i8042' (string)
platform.id = 'i8042' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port'
info.linux.driver = 'psmouse' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string)
info.product = 'i8042 AUX3 port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio4' (string)
serio.description = 'i8042 AUX3 port' (string)
serio.id = 'serio4' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port_logicaldev_input'
info.capabilities = {'input', 'input.touchpad'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port' (string)
info.product = 'SynPS/2 Synaptics TouchPad' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port_logicaldev_input' (string)
input.device = '/dev/input/event6' (string)
input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port' (string)
input.product = 'SynPS/2 Synaptics TouchPad' (string)
input.x11_driver = 'synaptics' (string)
linux.device_file = '/dev/input/event6' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio4/input/input6/event6' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX2_port'
info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string)
info.product = 'i8042 AUX2 port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX2_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio3' (string)
serio.description = 'i8042 AUX2 port' (string)
serio.id = 'serio3' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX1_port'
info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string)
info.product = 'i8042 AUX1 port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX1_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio2' (string)
serio.description = 'i8042 AUX1 port' (string)
serio.id = 'serio2' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX0_port'
info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string)
info.product = 'i8042 AUX0 port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX0_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio1' (string)
serio.description = 'i8042 AUX0 port' (string)
serio.id = 'serio1' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'
info.linux.driver = 'atkbd' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string)
info.product = 'i8042 KBD port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio0' (string)
serio.description = 'i8042 KBD port' (string)
serio.id = 'serio0' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'hal-setup-keymap', 'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'input.keymap', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
info.product = 'AT Translated Set 2 keyboard' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' (string)
input.device = '/dev/input/event0' (string)
input.keymap.data = {'e00b:switchvideomode', 'e016:wlan', 'e017:sleep', 'e018:suspend', 'e034:prog1'} (string list)
input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
input.product = 'AT Translated Set 2 keyboard' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'de' (string)
input.xkb.model = 'pc105' (string)
input.xkb.options = 'lv3:ralt_switch,compose:rctrl' (string)
input.xkb.rules = 'base' (string)
linux.device_file = '/dev/input/event0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio0/input/input0/event0' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_27da'
info.linux.driver = 'i801_smbus' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801G (ICH7 Family) SMBus Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27da' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 5 (0x5) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3' (string)
pci.product = '82801G (ICH7 Family) SMBus Controller' (string)
pci.product_id = 10202 (0x27da) (int)
pci.subsys_product_id = 8307 (0x2073) (int)
pci.subsys_vendor = 'Lenovo' (string)
pci.subsys_vendor_id = 6058 (0x17aa) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_27c4'
info.linux.driver = 'ata_piix' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801GBM/GHM (ICH7 Family) SATA IDE Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c4' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2' (string)
pci.device_class = 1 (0x1) (int)
pci.device_protocol = 128 (0x80) (int)
pci.device_subclass = 1 (0x1) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2' (string)
pci.product = '82801GBM/GHM (ICH7 Family) SATA IDE Controller' (string)
pci.product_id = 10180 (0x27c4) (int)
pci.subsys_product_id = 8306 (0x2072) (int)
pci.subsys_vendor = 'Lenovo' (string)
pci.subsys_vendor_id = 6058 (0x17aa) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_0'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c4' (string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1' (string)
scsi_host.host = 1 (0x1) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_0_scsi_host'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_0' (string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_0_scsi_host' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1/scsi_host/host1' (string)
scsi_host.host = 1 (0x1) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_0_scsi_device_lun0'
info.linux.driver = 'sr' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_0' (string)
info.product = 'SCSI Device' (string)
info.subsystem = 'scsi' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_0_scsi_device_lun0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0' (string)
scsi.bus = 0 (0x0) (int)
scsi.host = 1 (0x1) (int)
scsi.lun = 0 (0x0) (int)
scsi.model = 'DVDRAM GMA-4082N' (string)
scsi.target = 0 (0x0) (int)
scsi.type = 'cdrom' (string)
scsi.vendor = 'HL-DT-ST' (string)
udi = '/org/freedesktop/Hal/devices/storage_model_DVDRAM_GMA_4082N'
access_control.file = '/dev/sr0' (string)
access_control.type = 'cdrom' (string)
block.device = '/dev/sr0' (string)
block.is_volume = false (bool)
block.major = 11 (0xb) (int)
block.minor = 0 (0x0) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_model_DVDRAM_GMA_4082N' (string)
info.addons = {'hald-addon-storage'} (string list)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'storage', 'block', 'storage.cdrom', 'access_control'} (string list)
info.category = 'storage' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_0_scsi_device_lun0' (string)
info.product = 'DVDRAM GMA-4082N' (string)
info.udi = '/org/freedesktop/Hal/devices/storage_model_DVDRAM_GMA_4082N' (string)
info.vendor = 'HL-DT-ST' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0' (string)
org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list)
org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list)
org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list)
storage.automount_enabled_hint = true (bool)
storage.bus = 'pci' (string)
storage.cdrom.bd = false (bool)
storage.cdrom.bdr = false (bool)
storage.cdrom.bdre = false (bool)
storage.cdrom.cdr = true (bool)
storage.cdrom.cdrw = true (bool)
storage.cdrom.dvd = true (bool)
storage.cdrom.dvdplusr = true (bool)
storage.cdrom.dvdplusrdl = true (bool)
storage.cdrom.dvdplusrw = true (bool)
storage.cdrom.dvdplusrwdl = false (bool)
storage.cdrom.dvdr = true (bool)
storage.cdrom.dvdram = true (bool)
storage.cdrom.dvdrdl = true (bool)
storage.cdrom.dvdrw = true (bool)
storage.cdrom.hddvd = false (bool)
storage.cdrom.hddvdr = false (bool)
storage.cdrom.hddvdrw = false (bool)
storage.cdrom.mo = false (bool)
storage.cdrom.mrw = true (bool)
storage.cdrom.mrw_w = true (bool)
storage.cdrom.read_speed = 4234 (0x108a) (int)
storage.cdrom.support_media_changed = true (bool)
storage.cdrom.support_multisession = true (bool)
storage.cdrom.write_speed = 4234 (0x108a) (int)
storage.cdrom.write_speeds = {'4234', '2822', '1764', '706'} (string list)
storage.drive_type = 'cdrom' (string)
storage.firmware_version = 'TX07' (string)
storage.hotpluggable = false (bool)
storage.lun = 0 (0x0) (int)
storage.media_check_enabled = true (bool)
storage.model = 'DVDRAM GMA-4082N' (string)
storage.no_partitions_hint = true (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string)
storage.partitioning_scheme = '' (string)
storage.removable = true (bool)
storage.removable.media_available = false (bool)
storage.removable.support_async_notification = false (bool)
storage.requires_eject = true (bool)
storage.size = 0 (0x0) (uint64)
storage.vendor = 'HL-DT-ST' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_0_scsi_device_lun0_scsi_generic'
access_control.file = '/dev/sg1' (string)
access_control.type = 'cdrom' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'scsi_generic', 'access_control'} (string list)
info.category = 'scsi_generic' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_0_scsi_device_lun0' (string)
info.product = 'SCSI Generic Interface' (string)
info.subsystem = 'scsi_generic' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_0_scsi_device_lun0_scsi_generic' (string)
linux.device_file = '/dev/sg1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_generic' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/scsi_generic/sg1' (string)
scsi_generic.device = '/dev/sg1' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c4' (string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0' (string)
scsi_host.host = 0 (0x0) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_scsi_host'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host' (string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_scsi_host' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/scsi_host/host0' (string)
scsi_host.host = 0 (0x0) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_scsi_device_lun0'
info.linux.driver = 'sd' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host' (string)
info.product = 'SCSI Device' (string)
info.subsystem = 'scsi' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_scsi_device_lun0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0' (string)
scsi.bus = 0 (0x0) (int)
scsi.host = 0 (0x0) (int)
scsi.lun = 0 (0x0) (int)
scsi.model = 'HITACHI HTS54161' (string)
scsi.target = 0 (0x0) (int)
scsi.type = 'disk' (string)
scsi.vendor = 'ATA' (string)
udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_HITACHI_HTS5416_SB2D41E4CVUG5E'
block.device = '/dev/sda' (string)
block.is_volume = false (bool)
block.major = 8 (0x8) (int)
block.minor = 0 (0x0) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_HITACHI_HTS5416_SB2D41E4CVUG5E' (string)
info.capabilities = {'storage', 'block'} (string list)
info.category = 'storage' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_scsi_device_lun0' (string)
info.product = 'HITACHI HTS54161' (string)
info.udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_HITACHI_HTS5416_SB2D41E4CVUG5E' (string)
info.vendor = 'ATA' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda' (string)
storage.automount_enabled_hint = true (bool)
storage.bus = 'pci' (string)
storage.drive_type = 'disk' (string)
storage.firmware_version = 'SBDI' (string)
storage.hotpluggable = false (bool)
storage.lun = 0 (0x0) (int)
storage.media_check_enabled = false (bool)
storage.model = 'HITACHI HTS54161' (string)
storage.no_partitions_hint = false (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string)
storage.partitioning_scheme = 'mbr' (string)
storage.removable = false (bool)
storage.removable.media_available = true (bool)
storage.removable.media_size = 120034123776 (0x1bf2976000) (uint64)
storage.requires_eject = false (bool)
storage.serial = 'SATA_HITACHI_HTS5416_SB2D41E4CVUG5E' (string)
storage.size = 120034123776 (0x1bf2976000) (uint64)
storage.vendor = 'ATA' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_c2a03a46_ecc3_4cf3_aa30_b53d8493f9ae'
block.device = '/dev/dm-0' (string)
block.is_volume = true (bool)
block.major = 254 (0xfe) (int)
block.minor = 0 (0x0) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_HITACHI_HTS5416_SB2D41E4CVUG5E' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_HITACHI_HTS5416_SB2D41E4CVUG5E' (string)
info.product = 'home' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_c2a03a46_ecc3_4cf3_aa30_b53d8493f9ae' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/virtual/block/dm-0' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as'} (string list)
volume.block_size = 512 (0x200) (int)
volume.crypto_luks.clear.backing_volume = '/org/freedesktop/Hal/devices/volume_uuid_dee0e732_588a_49c0_b877_e665b6d1bd7d' (string)
volume.fstype = 'ext3' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '1.0' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = false (bool)
volume.label = 'home' (string)
volume.linux.is_device_mapper = true (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list)
volume.mount_point = '/home' (string)
volume.num_blocks = 205581749 (0xc40edb5) (uint64)
volume.size = 105257855488 (0x1881db6a00) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = 'c2a03a46-ecc3-4cf3-aa30-b53d8493f9ae' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_6e242b1c_7c1b_489a_81e0_1285ca78f116'
block.device = '/dev/sda1' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 1 (0x1) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_HITACHI_HTS5416_SB2D41E4CVUG5E' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_HITACHI_HTS5416_SB2D41E4CVUG5E' (string)
info.product = 'Debian GNU%Linux' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_6e242b1c_7c1b_489a_81e0_1285ca78f116' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda1' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ext3' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '1.0' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = 'Debian GNU%Linux' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list)
volume.mount_point = '/' (string)
volume.num_blocks = 24948882 (0x17cb092) (uint64)
volume.partition.media_size = 120034123776 (0x1bf2976000) (uint64)
volume.partition.number = 1 (0x1) (int)
volume.partition.start = 32256 (0x7e00) (uint64)
volume.size = 12773827584 (0x2f9612400) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = '6e242b1c-7c1b-489a-81e0-1285ca78f116' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_dee0e732_588a_49c0_b877_e665b6d1bd7d'
block.device = '/dev/sda3' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 3 (0x3) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_HITACHI_HTS5416_SB2D41E4CVUG5E' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume.Crypto'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_HITACHI_HTS5416_SB2D41E4CVUG5E' (string)
info.product = 'Volume (crypto_LUKS)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_dee0e732_588a_49c0_b877_e665b6d1bd7d' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda3' (string)
org.freedesktop.Hal.Device.Volume.Crypto.method_argnames = {'passphrase', ''} (string list)
org.freedesktop.Hal.Device.Volume.Crypto.method_execpaths = {'hal-luks-setup', 'hal-luks-teardown'} (string list)
org.freedesktop.Hal.Device.Volume.Crypto.method_names = {'Setup', 'Teardown'} (string list)
org.freedesktop.Hal.Device.Volume.Crypto.method_signatures = {'s', ''} (string list)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'crypto_LUKS' (string)
volume.fsusage = 'crypto' (string)
volume.fsversion = '2' (string)
volume.ignore = true (bool)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount_point = '' (string)
volume.num_blocks = 205583805 (0xc40f5bd) (uint64)
volume.partition.media_size = 120034123776 (0x1bf2976000) (uint64)
volume.partition.number = 3 (0x3) (int)
volume.partition.start = 14772602880 (0x370840800) (uint64)
volume.size = 105258908160 (0x1881eb7a00) (uint64)
volume.uuid = 'dee0e732-588a-49c0-b877-e665b6d1bd7d' (string)
udi = '/org/freedesktop/Hal/devices/volume_part2_size_1998743040'
block.device = '/dev/sda2' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 2 (0x2) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_HITACHI_HTS5416_SB2D41E4CVUG5E' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_HITACHI_HTS5416_SB2D41E4CVUG5E' (string)
info.product = 'Volume (swap)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_part2_size_1998743040' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda2' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'swap' (string)
volume.fsusage = 'other' (string)
volume.fsversion = '2' (string)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount_point = '' (string)
volume.num_blocks = 3903795 (0x3b9133) (uint64)
volume.partition.media_size = 120034123776 (0x1bf2976000) (uint64)
volume.partition.number = 2 (0x2) (int)
volume.partition.start = 12773859840 (0x2f961a200) (uint64)
volume.size = 1998743040 (0x77226600) (uint64)
volume.uuid = '' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_scsi_device_lun0_scsi_generic'
info.capabilities = {'scsi_generic'} (string list)
info.category = 'scsi_generic' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_scsi_device_lun0' (string)
info.product = 'SCSI Generic Interface' (string)
info.subsystem = 'scsi_generic' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_scsi_device_lun0_scsi_generic' (string)
linux.device_file = '/dev/sg0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_generic' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/scsi_generic/sg0' (string)
scsi_generic.device = '/dev/sg0' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_27b9'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801GBM (ICH7-M) LPC Interface Bridge' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27b9' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 1 (0x1) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0' (string)
pci.product = '82801GBM (ICH7-M) LPC Interface Bridge' (string)
pci.product_id = 10169 (0x27b9) (int)
pci.subsys_product_id = 8305 (0x2071) (int)
pci.subsys_vendor = 'Lenovo' (string)
pci.subsys_vendor_id = 6058 (0x17aa) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2448'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801 Mobile PCI Bridge' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2448' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 1 (0x1) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0' (string)
pci.product = '82801 Mobile PCI Bridge' (string)
pci.product_id = 9288 (0x2448) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_1180_852'
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string)
info.product = 'xD-Picture Card Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1180_852' (string)
info.vendor = 'Ricoh Co Ltd' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:05:06.3' (string)
pci.device_class = 8 (0x8) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 128 (0x80) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:05:06.3' (string)
pci.product = 'xD-Picture Card Controller' (string)
pci.product_id = 2130 (0x852) (int)
pci.subsys_product_id = 8314 (0x207a) (int)
pci.subsys_vendor = 'Lenovo' (string)
pci.subsys_vendor_id = 6058 (0x17aa) (int)
pci.vendor = 'Ricoh Co Ltd' (string)
pci.vendor_id = 4480 (0x1180) (int)
udi = '/org/freedesktop/Hal/devices/pci_1180_592'
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string)
info.product = 'R5C592 Memory Stick Bus Host Adapter' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1180_592' (string)
info.vendor = 'Ricoh Co Ltd' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:05:06.2' (string)
pci.device_class = 8 (0x8) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 128 (0x80) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:05:06.2' (string)
pci.product = 'R5C592 Memory Stick Bus Host Adapter' (string)
pci.product_id = 1426 (0x592) (int)
pci.subsys_product_id = 8313 (0x2079) (int)
pci.subsys_vendor = 'Lenovo' (string)
pci.subsys_vendor_id = 6058 (0x17aa) (int)
pci.vendor = 'Ricoh Co Ltd' (string)
pci.vendor_id = 4480 (0x1180) (int)
udi = '/org/freedesktop/Hal/devices/pci_1180_822'
info.linux.driver = 'sdhci-pci' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string)
info.product = 'R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1180_822' (string)
info.vendor = 'Ricoh Co Ltd' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:05:06.1' (string)
pci.device_class = 8 (0x8) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 5 (0x5) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:05:06.1' (string)
pci.product = 'R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter' (string)
pci.product_id = 2082 (0x822) (int)
pci.subsys_product_id = 8311 (0x2077) (int)
pci.subsys_vendor = 'Lenovo' (string)
pci.subsys_vendor_id = 6058 (0x17aa) (int)
pci.vendor = 'Ricoh Co Ltd' (string)
pci.vendor_id = 4480 (0x1180) (int)
udi = '/org/freedesktop/Hal/devices/pci_1180_822_mmc_host'
info.capabilities = {'mmc_host'} (string list)
info.category = 'mmc_host' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1180_822' (string)
info.product = 'MMC/SD Host Adapter' (string)
info.subsystem = 'mmc_host' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1180_822_mmc_host' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'mmc_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:05:06.1/mmc_host/mmc0' (string)
mmc_host.host = 0 (0x0) (int)
udi = '/org/freedesktop/Hal/devices/leds_mmc0'
info.capabilities = {'leds'} (string list)
info.category = 'leds' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1180_822' (string)
info.subsystem = 'leds' (string)
info.udi = '/org/freedesktop/Hal/devices/leds_mmc0' (string)
leds.device_name = 'mmc0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'leds' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:05:06.1/leds/mmc0::' (string)
udi = '/org/freedesktop/Hal/devices/pci_1180_832'
info.linux.driver = 'firewire_ohci' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string)
info.product = 'R5C832 IEEE 1394 Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1180_832' (string)
info.vendor = 'Ricoh Co Ltd' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:05:06.0' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 16 (0x10) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:05:06.0' (string)
pci.product = 'R5C832 IEEE 1394 Controller' (string)
pci.product_id = 2098 (0x832) (int)
pci.subsys_product_id = 8310 (0x2076) (int)
pci.subsys_vendor = 'Lenovo' (string)
pci.subsys_vendor_id = 6058 (0x17aa) (int)
pci.vendor = 'Ricoh Co Ltd' (string)
pci.vendor_id = 4480 (0x1180) (int)
udi = '/org/freedesktop/Hal/devices/ieee1394_guid23f77ab403152'
ieee1394.device = '/dev/fw0' (string)
ieee1394.guid = 632733160190290 (0x23f77ab403152) (uint64)
ieee1394.product = 'Juju' (string)
ieee1394.product_id = 1 (0x1) (int)
ieee1394.vendor = 'Linux Firewire' (string)
ieee1394.vendor_id = 13634846 (0xd00d1e) (int)
info.capabilities = {'ieee1394'} (string list)
info.parent = '/org/freedesktop/Hal/devices/pci_1180_832' (string)
info.subsystem = 'ieee1394' (string)
info.udi = '/org/freedesktop/Hal/devices/ieee1394_guid23f77ab403152' (string)
linux.device_file = '/dev/fw0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'firewire' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:05:06.0/fw0' (string)
udi = '/org/freedesktop/Hal/devices/pci_1524_1410'
info.linux.driver = 'yenta_cardbus' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string)
info.product = 'CB1410 Cardbus Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1524_1410' (string)
info.vendor = 'ENE Technology Inc' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:05:04.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 7 (0x7) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:05:04.0' (string)
pci.product = 'CB1410 Cardbus Controller' (string)
pci.product_id = 5136 (0x1410) (int)
pci.subsys_product_id = 8309 (0x2075) (int)
pci.subsys_vendor = 'Lenovo' (string)
pci.subsys_vendor_id = 6058 (0x17aa) (int)
pci.vendor = 'ENE Technology Inc' (string)
pci.vendor_id = 5412 (0x1524) (int)
udi = '/org/freedesktop/Hal/devices/pci_1186_1340'
info.linux.driver = '8139too' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1524_1410' (string)
info.product = 'DFE-690TXD CardBus PC Card' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1186_1340' (string)
info.vendor = 'D-Link System Inc' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:05:04.0/0000:06:00.0' (string)
pci.device_class = 2 (0x2) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:05:04.0/0000:06:00.0' (string)
pci.product = 'DFE-690TXD CardBus PC Card' (string)
pci.product_id = 4928 (0x1340) (int)
pci.subsys_product_id = 4928 (0x1340) (int)
pci.subsys_vendor = 'D-Link System Inc' (string)
pci.subsys_vendor_id = 4486 (0x1186) (int)
pci.vendor = 'D-Link System Inc' (string)
pci.vendor_id = 4486 (0x1186) (int)
udi = '/org/freedesktop/Hal/devices/net_00_21_91_fa_5f_66'
info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list)
info.category = 'net.80203' (string)
info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list)
info.parent = '/org/freedesktop/Hal/devices/pci_1186_1340' (string)
info.product = 'Networking Interface' (string)
info.subsystem = 'net' (string)
info.udi = '/org/freedesktop/Hal/devices/net_00_21_91_fa_5f_66' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'net' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:05:04.0/0000:06:00.0/net/eth1' (string)
net.80203.mac_address = 144183025510 (0x2191fa5f66) (uint64)
net.address = '00:21:91:fa:5f:66' (string)
net.arp_proto_hw_id = 1 (0x1) (int)
net.interface = 'eth1' (string)
net.linux.ifindex = 5 (0x5) (int)
net.originating_device = '/org/freedesktop/Hal/devices/pci_1186_1340' (string)
org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list)
org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list)
org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list)
org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list)
udi = '/org/freedesktop/Hal/devices/pci_10ec_8139'
info.linux.driver = '8139too' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string)
info.product = 'RTL-8139/8139C/8139C+' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10ec_8139' (string)
info.vendor = 'Realtek Semiconductor Co., Ltd.' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:05:01.0' (string)
pci.device_class = 2 (0x2) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:05:01.0' (string)
pci.product = 'RTL-8139/8139C/8139C+' (string)
pci.product_id = 33081 (0x8139) (int)
pci.subsys_product_id = 8308 (0x2074) (int)
pci.subsys_vendor = 'Lenovo' (string)
pci.subsys_vendor_id = 6058 (0x17aa) (int)
pci.vendor = 'Realtek Semiconductor Co., Ltd.' (string)
pci.vendor_id = 4332 (0x10ec) (int)
udi = '/org/freedesktop/Hal/devices/net_00_1b_38_09_0b_65'
info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list)
info.category = 'net.80203' (string)
info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list)
info.parent = '/org/freedesktop/Hal/devices/pci_10ec_8139' (string)
info.product = 'Networking Interface' (string)
info.subsystem = 'net' (string)
info.udi = '/org/freedesktop/Hal/devices/net_00_1b_38_09_0b_65' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'net' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:05:01.0/net/eth0' (string)
net.80203.mac_address = 116904233829 (0x1b38090b65) (uint64)
net.address = '00:1b:38:09:0b:65' (string)
net.arp_proto_hw_id = 1 (0x1) (int)
net.interface = 'eth0' (string)
net.linux.ifindex = 2 (0x2) (int)
net.originating_device = '/org/freedesktop/Hal/devices/pci_10ec_8139' (string)
org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list)
org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list)
org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list)
org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list)
udi = '/org/freedesktop/Hal/devices/pci_8086_27cc'
info.linux.driver = 'ehci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801G (ICH7 Family) USB2 EHCI Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27cc' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 32 (0x20) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7' (string)
pci.product = '82801G (ICH7 Family) USB2 EHCI Controller' (string)
pci.product_id = 10188 (0x27cc) (int)
pci.subsys_product_id = 8303 (0x206f) (int)
pci.subsys_vendor = 'Lenovo' (string)
pci.subsys_vendor_id = 6058 (0x17aa) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27cc' (string)
info.product = '2.0 root hub' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' (string)
info.vendor = 'Linux Foundation' (string)
linux.device_file = '/dev/bus/usb/001/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1' (string)
usb_device.bus_number = 1 (0x1) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 8 (0x8) (int)
usb_device.product = '2.0 root hub' (string)
usb_device.product_id = 2 (0x2) (int)
usb_device.serial = '0000:00:1d.7' (string)
usb_device.speed = 480.0 (480) (double)
usb_device.vendor = 'Linux Foundation' (string)
usb_device.vendor_id = 7531 (0x1d6b) (int)
usb_device.version = 2.0 (2) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' (string)
info.product = 'USB Raw Device Access' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_usbraw' (string)
linux.device_file = '/dev/bus/usb/001/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/usb_device/usbdev1.1' (string)
usbraw.device = '/dev/bus/usb/001/001' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_5dc_300_302AC2120732032'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' (string)
info.product = 'Jumpdrive Geysr' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_5dc_300_302AC2120732032' (string)
info.vendor = 'Lexar Media, Inc.' (string)
linux.device_file = '/dev/bus/usb/001/002' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1' (string)
usb_device.bus_number = 1 (0x1) (int)
usb_device.can_wake_up = false (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 0 (0x0) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 1 (0x1) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = false (bool)
usb_device.linux.device_number = 2 (0x2) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1' (string)
usb_device.max_power = 120 (0x78) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.product = 'Jumpdrive Geysr' (string)
usb_device.product_id = 768 (0x300) (int)
usb_device.serial = '302AC2120732032' (string)
usb_device.speed = 480.0 (480) (double)
usb_device.vendor = 'Lexar Media, Inc.' (string)
usb_device.vendor_id = 1500 (0x5dc) (int)
usb_device.version = 2.0 (2) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_5dc_300_302AC2120732032_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_5dc_300_302AC2120732032' (string)
info.product = 'USB Raw Device Access' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_5dc_300_302AC2120732032_usbraw' (string)
linux.device_file = '/dev/bus/usb/001/002' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/usb_device/usbdev1.2' (string)
usbraw.device = '/dev/bus/usb/001/002' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_5dc_300_302AC2120732032_if0'
info.linux.driver = 'usb-storage' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_5dc_300_302AC2120732032' (string)
info.product = 'USB Mass Storage Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_5dc_300_302AC2120732032_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0' (string)
usb.bus_number = 1 (0x1) (int)
usb.can_wake_up = false (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 1 (0x1) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 8 (0x8) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 80 (0x50) (int)
usb.interface.subclass = 6 (0x6) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0' (string)
usb.max_power = 120 (0x78) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Mass Storage Interface' (string)
usb.product_id = 768 (0x300) (int)
usb.serial = '302AC2120732032' (string)
usb.speed = 480.0 (480) (double)
usb.vendor = 'Lexar Media, Inc.' (string)
usb.vendor_id = 1500 (0x5dc) (int)
usb.version = 2.0 (2) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_5dc_300_302AC2120732032_if0_scsi_host'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_5dc_300_302AC2120732032_if0' (string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_5dc_300_302AC2120732032_if0_scsi_host' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/host2' (string)
scsi_host.host = 2 (0x2) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_5dc_300_302AC2120732032_if0_scsi_host_scsi_host'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_5dc_300_302AC2120732032_if0_scsi_host' (string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_5dc_300_302AC2120732032_if0_scsi_host_scsi_host' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/host2/scsi_host/host2' (string)
scsi_host.host = 2 (0x2) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_5dc_300_302AC2120732032_if0_scsi_host_scsi_device_lun0'
info.linux.driver = 'sd' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_5dc_300_302AC2120732032_if0_scsi_host' (string)
info.product = 'SCSI Device' (string)
info.subsystem = 'scsi' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_5dc_300_302AC2120732032_if0_scsi_host_scsi_device_lun0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/host2/target2:0:0/2:0:0:0' (string)
scsi.bus = 0 (0x0) (int)
scsi.host = 2 (0x2) (int)
scsi.lun = 0 (0x0) (int)
scsi.model = 'GEYSER JUMPDRIVE' (string)
scsi.target = 0 (0x0) (int)
scsi.type = 'disk' (string)
scsi.vendor = 'LEXAR' (string)
udi = '/org/freedesktop/Hal/devices/storage_serial_LEXAR_GEYSER_JUMPDRIVE_302AC2120732032_0_0'
access_control.file = '/dev/sdb' (string)
access_control.type = 'removable-block' (string)
block.device = '/dev/sdb' (string)
block.is_volume = false (bool)
block.major = 8 (0x8) (int)
block.minor = 16 (0x10) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_LEXAR_GEYSER_JUMPDRIVE_302AC2120732032_0_0' (string)
info.addons = {'hald-addon-storage'} (string list)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'storage', 'block', 'access_control'} (string list)
info.category = 'storage' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
info.parent = '/org/freedesktop/Hal/devices/usb_device_5dc_300_302AC2120732032_if0_scsi_host_scsi_device_lun0' (string)
info.product = 'GEYSER JUMPDRIVE' (string)
info.udi = '/org/freedesktop/Hal/devices/storage_serial_LEXAR_GEYSER_JUMPDRIVE_302AC2120732032_0_0' (string)
info.vendor = 'LEXAR' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/host2/target2:0:0/2:0:0:0/block/sdb' (string)
storage.automount_enabled_hint = true (bool)
storage.bus = 'usb' (string)
storage.drive_type = 'disk' (string)
storage.firmware_version = '1.00' (string)
storage.hotpluggable = true (bool)
storage.lun = 0 (0x0) (int)
storage.media_check_enabled = true (bool)
storage.model = 'GEYSER JUMPDRIVE' (string)
storage.no_partitions_hint = false (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/usb_device_5dc_300_302AC2120732032_if0' (string)
storage.partitioning_scheme = 'mbr' (string)
storage.removable = true (bool)
storage.removable.media_available = true (bool)
storage.removable.media_size = 1031675904 (0x3d7e2000) (uint64)
storage.removable.support_async_notification = false (bool)
storage.requires_eject = false (bool)
storage.serial = 'LEXAR_GEYSER_JUMPDRIVE_302AC2120732032-0:0' (string)
storage.size = 0 (0x0) (uint64)
storage.vendor = 'LEXAR' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_a7686dc8_d044_483e_ab98_6dc249977e79'
access_control.file = '/dev/sdb1' (string)
access_control.type = 'removable-block' (string)
block.device = '/dev/sdb1' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 17 (0x11) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_LEXAR_GEYSER_JUMPDRIVE_302AC2120732032_0_0' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'volume', 'block', 'access_control'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_LEXAR_GEYSER_JUMPDRIVE_302AC2120732032_0_0' (string)
info.product = 'buttplug' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_a7686dc8_d044_483e_ab98_6dc249977e79' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/host2/target2:0:0/2:0:0:0/block/sdb/sdb1' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ext3' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '1.0' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = 'buttplug' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list)
volume.mount_point = '/media/buttplug' (string)
volume.num_blocks = 1000000 (0xf4240) (uint64)
volume.partition.media_size = 1031675904 (0x3d7e2000) (uint64)
volume.partition.number = 1 (0x1) (int)
volume.partition.start = 512 (0x200) (uint64)
volume.size = 512000000 (0x1e848000) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = 'a7686dc8-d044-483e-ab98-6dc249977e79' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_5dc_300_302AC2120732032_if0_scsi_host_scsi_device_lun0_scsi_generic'
info.capabilities = {'scsi_generic'} (string list)
info.category = 'scsi_generic' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_5dc_300_302AC2120732032_if0_scsi_host_scsi_device_lun0' (string)
info.product = 'SCSI Generic Interface' (string)
info.subsystem = 'scsi_generic' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_5dc_300_302AC2120732032_if0_scsi_host_scsi_device_lun0_scsi_generic' (string)
linux.device_file = '/dev/sg2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_generic' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/host2/target2:0:0/2:0:0:0/scsi_generic/sg2' (string)
scsi_generic.device = '/dev/sg2' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0'
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0' (string)
usb.bus_number = 1 (0x1) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 8 (0x8) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 2 (0x2) (int)
usb.serial = '0000:00:1d.7' (string)
usb.speed = 480.0 (480) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531 (0x1d6b) (int)
usb.version = 2.0 (2) (double)
udi = '/org/freedesktop/Hal/devices/pci_8086_27cb'
info.linux.driver = 'uhci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801G (ICH7 Family) USB UHCI Controller #4' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27cb' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3' (string)
pci.product = '82801G (ICH7 Family) USB UHCI Controller #4' (string)
pci.product_id = 10187 (0x27cb) (int)
pci.subsys_product_id = 8302 (0x206e) (int)
pci.subsys_vendor = 'Lenovo' (string)
pci.subsys_vendor_id = 6058 (0x17aa) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27cb' (string)
info.product = '1.1 root hub' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3' (string)
info.vendor = 'Linux Foundation' (string)
linux.device_file = '/dev/bus/usb/005/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5' (string)
usb_device.bus_number = 5 (0x5) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = '1.1 root hub' (string)
usb_device.product_id = 1 (0x1) (int)
usb_device.serial = '0000:00:1d.3' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.vendor = 'Linux Foundation' (string)
usb_device.vendor_id = 7531 (0x1d6b) (int)
usb_device.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3' (string)
info.product = 'USB Raw Device Access' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3_usbraw' (string)
linux.device_file = '/dev/bus/usb/005/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5/usb_device/usbdev5.1' (string)
usbraw.device = '/dev/bus/usb/005/001' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3_if0'
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-0:1.0' (string)
usb.bus_number = 5 (0x5) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 1 (0x1) (int)
usb.serial = '0000:00:1d.3' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531 (0x1d6b) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/pci_8086_27ca'
info.linux.driver = 'uhci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801G (ICH7 Family) USB UHCI Controller #3' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27ca' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2' (string)
pci.product = '82801G (ICH7 Family) USB UHCI Controller #3' (string)
pci.product_id = 10186 (0x27ca) (int)
pci.subsys_product_id = 8301 (0x206d) (int)
pci.subsys_vendor = 'Lenovo' (string)
pci.subsys_vendor_id = 6058 (0x17aa) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27ca' (string)
info.product = '1.1 root hub' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2' (string)
info.vendor = 'Linux Foundation' (string)
linux.device_file = '/dev/bus/usb/004/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4' (string)
usb_device.bus_number = 4 (0x4) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = '1.1 root hub' (string)
usb_device.product_id = 1 (0x1) (int)
usb_device.serial = '0000:00:1d.2' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.vendor = 'Linux Foundation' (string)
usb_device.vendor_id = 7531 (0x1d6b) (int)
usb_device.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2' (string)
info.product = 'USB Raw Device Access' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_usbraw' (string)
linux.device_file = '/dev/bus/usb/004/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4/usb_device/usbdev4.1' (string)
usbraw.device = '/dev/bus/usb/004/001' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0'
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0' (string)
usb.bus_number = 4 (0x4) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 1 (0x1) (int)
usb.serial = '0000:00:1d.2' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531 (0x1d6b) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/pci_8086_27c9'
info.linux.driver = 'uhci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801G (ICH7 Family) USB UHCI Controller #2' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c9' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1' (string)
pci.product = '82801G (ICH7 Family) USB UHCI Controller #2' (string)
pci.product_id = 10185 (0x27c9) (int)
pci.subsys_product_id = 8300 (0x206c) (int)
pci.subsys_vendor = 'Lenovo' (string)
pci.subsys_vendor_id = 6058 (0x17aa) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c9' (string)
info.product = '1.1 root hub' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string)
info.vendor = 'Linux Foundation' (string)
linux.device_file = '/dev/bus/usb/003/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3' (string)
usb_device.bus_number = 3 (0x3) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = '1.1 root hub' (string)
usb_device.product_id = 1 (0x1) (int)
usb_device.serial = '0000:00:1d.1' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.vendor = 'Linux Foundation' (string)
usb_device.vendor_id = 7531 (0x1d6b) (int)
usb_device.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string)
info.product = 'USB Raw Device Access' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_usbraw' (string)
linux.device_file = '/dev/bus/usb/003/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/usb_device/usbdev3.1' (string)
usbraw.device = '/dev/bus/usb/003/001' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0'
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0' (string)
usb.bus_number = 3 (0x3) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 1 (0x1) (int)
usb.serial = '0000:00:1d.1' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531 (0x1d6b) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/pci_8086_27c8'
info.linux.driver = 'uhci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801G (ICH7 Family) USB UHCI Controller #1' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c8' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0' (string)
pci.product = '82801G (ICH7 Family) USB UHCI Controller #1' (string)
pci.product_id = 10184 (0x27c8) (int)
pci.subsys_product_id = 8299 (0x206b) (int)
pci.subsys_vendor = 'Lenovo' (string)
pci.subsys_vendor_id = 6058 (0x17aa) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c8' (string)
info.product = '1.1 root hub' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0' (string)
info.vendor = 'Linux Foundation' (string)
linux.device_file = '/dev/bus/usb/002/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2' (string)
usb_device.bus_number = 2 (0x2) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = '1.1 root hub' (string)
usb_device.product_id = 1 (0x1) (int)
usb_device.serial = '0000:00:1d.0' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.vendor = 'Linux Foundation' (string)
usb_device.vendor_id = 7531 (0x1d6b) (int)
usb_device.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0' (string)
info.product = 'USB Raw Device Access' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_usbraw' (string)
linux.device_file = '/dev/bus/usb/002/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/usb_device/usbdev2.1' (string)
usbraw.device = '/dev/bus/usb/002/001' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0'
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0' (string)
usb.bus_number = 2 (0x2) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 1 (0x1) (int)
usb.serial = '0000:00:1d.0' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531 (0x1d6b) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/pci_8086_27d2'
info.linux.driver = 'pcieport-driver' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801G (ICH7 Family) PCI Express Port 2' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d2' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1' (string)
pci.product = '82801G (ICH7 Family) PCI Express Port 2' (string)
pci.product_id = 10194 (0x27d2) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_4227'
info.linux.driver = 'iwl3945' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d2' (string)
info.product = 'PRO/Wireless 3945ABG [Golan] Network Connection' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_4227' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0' (string)
pci.device_class = 2 (0x2) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 128 (0x80) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0' (string)
pci.product = 'PRO/Wireless 3945ABG [Golan] Network Connection' (string)
pci.product_id = 16935 (0x4227) (int)
pci.subsys_product = 'ThinkPad R60e/X60s' (string)
pci.subsys_product_id = 4113 (0x1011) (int)
pci.subsys_vendor = 'Intel Corporation' (string)
pci.subsys_vendor_id = 32902 (0x8086) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_4227_rfkill_3945ABG_wlan'
info.addons.singleton = {'hald-addon-rfkill-killswitch'} (string list)
info.capabilities = {'killswitch'} (string list)
info.category = 'killswitch' (string)
info.interfaces = {'org.freedesktop.Hal.Device.KillSwitch'} (string list)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_4227' (string)
info.product = '3945ABG wlan Killswitch' (string)
info.subsystem = 'rfkill' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_4227_rfkill_3945ABG_wlan' (string)
info.vendor = 'Intel Corporation' (string)
killswitch.access_method = 'rfkill' (string)
killswitch.name = '3945ABG' (string)
killswitch.state = 2 (0x2) (int)
killswitch.type = 'wlan' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'rfkill' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0/rfkill/rfkill0' (string)
udi = '/org/freedesktop/Hal/devices/net_00_1b_77_8e_4d_85_0'
info.capabilities = {'net', 'net.80211control'} (string list)
info.category = 'net.80211control' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_4227' (string)
info.product = 'Networking Wireless Control Interface' (string)
info.subsystem = 'net' (string)
info.udi = '/org/freedesktop/Hal/devices/net_00_1b_77_8e_4d_85_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'net' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0/net/wmaster0' (string)
net.address = '00:1b:77:8e:4d:85' (string)
net.arp_proto_hw_id = 801 (0x321) (int)
net.interface = 'wmaster0' (string)
net.linux.ifindex = 3 (0x3) (int)
net.originating_device = '/org/freedesktop/Hal/devices/pci_8086_4227' (string)
udi = '/org/freedesktop/Hal/devices/net_00_1b_77_8e_4d_85'
info.capabilities = {'net', 'net.80211'} (string list)
info.category = 'net.80211' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_4227' (string)
info.product = 'WLAN Interface' (string)
info.subsystem = 'net' (string)
info.udi = '/org/freedesktop/Hal/devices/net_00_1b_77_8e_4d_85' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'net' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0/net/wlan0' (string)
net.80211.mac_address = 117969931653 (0x1b778e4d85) (uint64)
net.address = '00:1b:77:8e:4d:85' (string)
net.arp_proto_hw_id = 1 (0x1) (int)
net.interface = 'wlan0' (string)
net.linux.ifindex = 4 (0x4) (int)
net.originating_device = '/org/freedesktop/Hal/devices/pci_8086_4227' (string)
udi = '/org/freedesktop/Hal/devices/iwl_wlan_switch'
info.addons = {'hald-addon-ipw-killswitch'} (string list)
info.capabilities = {'killswitch'} (string list)
info.category = 'killswitch' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_4227' (string)
info.product = 'Intel PRO/Wireless WLAN Switch' (string)
info.subsystem = 'unknown' (string)
info.udi = '/org/freedesktop/Hal/devices/iwl_wlan_switch' (string)
killswitch.access_method = 'ipw' (string)
killswitch.type = 'wlan' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_27d0'
info.linux.driver = 'pcieport-driver' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801G (ICH7 Family) PCI Express Port 1' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d0' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0' (string)
pci.product = '82801G (ICH7 Family) PCI Express Port 1' (string)
pci.product_id = 10192 (0x27d0) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_27d8'
info.linux.driver = 'HDA Intel' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801G (ICH7 Family) High Definition Audio Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0' (string)
pci.device_class = 4 (0x4) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0' (string)
pci.product = '82801G (ICH7 Family) High Definition Audio Controller' (string)
pci.product_id = 10200 (0x27d8) (int)
pci.subsys_product_id = 8294 (0x2066) (int)
pci.subsys_vendor = 'Lenovo' (string)
pci.subsys_vendor_id = 6058 (0x17aa) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0'
info.capabilities = {'sound'} (string list)
info.category = 'sound' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string)
info.product = 'HDA Intel Sound Card' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0' (string)
sound.card = 0 (0x0) (int)
sound.card_id = 'HDA Intel' (string)
sound.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_playback_0'
access_control.file = '/dev/snd/pcmC0D0p' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'HDA Intel' (string)
alsa.device = 0 (0x0) (int)
alsa.device_file = '/dev/snd/pcmC0D0p' (string)
alsa.device_id = 'ALC861VD Analog' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
alsa.pcm_class = 'generic' (string)
alsa.type = 'playback' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
info.product = 'ALC861VD Analog ALSA Playback Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_playback_0' (string)
linux.device_file = '/dev/snd/pcmC0D0p' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D0p' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_capture_0'
access_control.file = '/dev/snd/pcmC0D0c' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'HDA Intel' (string)
alsa.device = 0 (0x0) (int)
alsa.device_file = '/dev/snd/pcmC0D0c' (string)
alsa.device_id = 'ALC861VD Analog' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
alsa.pcm_class = 'generic' (string)
alsa.type = 'capture' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
info.product = 'ALC861VD Analog ALSA Capture Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_capture_0' (string)
linux.device_file = '/dev/snd/pcmC0D0c' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D0c' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_mixer__1'
access_control.file = '/dev/mixer' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
info.product = 'ALC861VD Analog OSS Control Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_mixer__1' (string)
linux.device_file = '/dev/mixer' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/mixer' (string)
oss.card = 0 (0x0) (int)
oss.card_id = 'HDA Intel' (string)
oss.device_file = '/dev/mixer' (string)
oss.device_id = 'ALC861VD Analog' (string)
oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
oss.type = 'mixer' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_hw_specific_1'
access_control.file = '/dev/snd/hwC0D1' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'HDA Intel' (string)
alsa.device = 1 (0x1) (int)
alsa.device_file = '/dev/snd/hwC0D1' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
alsa.type = 'hw_specific' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
info.product = 'HDA Intel ALSA hardware specific Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_hw_specific_1' (string)
linux.device_file = '/dev/snd/hwC0D1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D1' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_hw_specific_0'
access_control.file = '/dev/snd/hwC0D0' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'HDA Intel' (string)
alsa.device = 0 (0x0) (int)
alsa.device_file = '/dev/snd/hwC0D0' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
alsa.type = 'hw_specific' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
info.product = 'HDA Intel ALSA hardware specific Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_hw_specific_0' (string)
linux.device_file = '/dev/snd/hwC0D0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_pcm_0_0'
access_control.file = '/dev/dsp' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
info.product = 'ALC861VD Analog OSS PCM Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_pcm_0_0' (string)
linux.device_file = '/dev/dsp' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/dsp' (string)
oss.card = 0 (0x0) (int)
oss.card_id = 'HDA Intel' (string)
oss.device = 0 (0x0) (int)
oss.device_file = '/dev/dsp' (string)
oss.device_id = 'ALC861VD Analog' (string)
oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
oss.type = 'pcm' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_control__1'
access_control.file = '/dev/snd/controlC0' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'HDA Intel' (string)
alsa.device_file = '/dev/snd/controlC0' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
alsa.type = 'control' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
info.product = 'HDA Intel ALSA Control Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_control__1' (string)
linux.device_file = '/dev/snd/controlC0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/controlC0' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_pcm_0'
access_control.file = '/dev/audio' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
info.product = 'ALC861VD Analog OSS PCM Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_pcm_0' (string)
linux.device_file = '/dev/audio' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/audio' (string)
oss.card = 0 (0x0) (int)
oss.card_id = 'HDA Intel' (string)
oss.device = 0 (0x0) (int)
oss.device_file = '/dev/audio' (string)
oss.device_id = 'ALC861VD Analog' (string)
oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
oss.type = 'pcm' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_27a6'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27a6' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1' (string)
pci.device_class = 3 (0x3) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 128 (0x80) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1' (string)
pci.product = 'Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller' (string)
pci.product_id = 10150 (0x27a6) (int)
pci.subsys_product_id = 8290 (0x2062) (int)
pci.subsys_vendor = 'Lenovo' (string)
pci.subsys_vendor_id = 6058 (0x17aa) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_27a2'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27a2' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0' (string)
pci.device_class = 3 (0x3) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0' (string)
pci.product = 'Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller' (string)
pci.product_id = 10146 (0x27a2) (int)
pci.subsys_product_id = 8290 (0x2062) (int)
pci.subsys_vendor = 'Lenovo' (string)
pci.subsys_vendor_id = 6058 (0x17aa) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_27a2_drm_i915_card0'
access_control.file = '/dev/dri/card0' (string)
access_control.type = 'video' (string)
drm.dri_library = 'i915' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'drm', 'access_control'} (string list)
info.category = 'drm' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27a2' (string)
info.product = 'Direct Rendering Manager Device' (string)
info.subsystem = 'drm' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27a2_drm_i915_card0' (string)
info.vendor = 'Intel Corporation' (string)
linux.device_file = '/dev/dri/card0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'drm' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/drm/card0' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_27a0'
info.linux.driver = 'agpgart-intel' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27a0' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string)
pci.product = 'Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub' (string)
pci.product_id = 10144 (0x27a0) (int)
pci.subsys_product_id = 8289 (0x2061) (int)
pci.subsys_vendor = 'Lenovo' (string)
pci.subsys_vendor_id = 6058 (0x17aa) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
Dumped 121 device(s) from the Global Device List.
------------------------------------------------
More information about the Pkg-utopia-maintainers
mailing list