[Pkg-utopia-maintainers] Bug#625830: hald-probe-video4linux locks /dev/video0 (with CX23880 DVB)

Mathieu Roy yeupou at gnu.org
Fri May 6 10:00:34 UTC 2011


Package: hal
Version: 0.5.14-6
Severity: normal

Seems similar to bug #478348.

hald-probe-video4linux locks /dev/video0 and so any software that use it (mplayer, kdenlive, etc) stale, with segfault appears in logs.
(/dev/video0 = 01:08.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05))


I moved out hald-probe-video4linux from /usr/lib/hal and everything runs now perfectly.

I also get debsums errors caused by prelink. Is it a plausible cause?


In the log WITH hald-probe-video4linux:

Apr 22 10:16:06 bender kernel: [    6.056726] cx88_audio 0000:01:08.1: PCI INT A
 -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
Apr 22 10:16:06 bender kernel: [    6.058260] cx88[0]: subsystem: 0070:9601, boa
rd: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56,autodetected], fr
ontend(s): 1
Apr 22 10:16:06 bender kernel: [    6.058262] cx88[0]: TV tuner type 63, Radio t
uner type -1

Apr 22 10:16:06 bender kernel: [    6.077180] cx88/2: cx2388x MPEG-TS Driver Man
ager version 0.0.8 loaded
Apr 22 10:16:06 bender kernel: [    6.080039] cx88/0: cx2388x v4l2 driver versio
n 0.0.8 loaded


Apr 22 10:16:06 bender kernel: [    6.493038] tuner 6-0043: chip found @ 0x86 (c
x88[0])
Apr 22 10:16:06 bender kernel: [    6.536311] tda9887 6-0043: creating new insta
nce
Apr 22 10:16:06 bender kernel: [    6.536314] tda9887 6-0043: tda988[5/6/7] foun
d
Apr 22 10:16:06 bender kernel: [    6.539157] tuner 6-0061: chip found @ 0xc2 (c
x88[0])
Apr 22 10:16:06 bender kernel: [    6.575549] tveeprom 6-0050: Hauppauge model 9
6019, rev D6D3, serial# 3458095
Apr 22 10:16:06 bender kernel: [    6.575552] tveeprom 6-0050: MAC address is 00
:0d:fe:34:c4:2f
Apr 22 10:16:06 bender kernel: [    6.575554] tveeprom 6-0050: tuner model is Ph
ilips FMD1216MEX (idx 133, type 78)
Apr 22 10:16:06 bender kernel: [    6.575556] tveeprom 6-0050: TV standards PAL(
B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
Apr 22 10:16:06 bender kernel: [    6.575558] tveeprom 6-0050: audio processor i
s CX882 (idx 33)
Apr 22 10:16:06 bender kernel: [    6.575560] tveeprom 6-0050: decoder processor
 is CX882 (idx 25)
Apr 22 10:16:06 bender kernel: [    6.575562] tveeprom 6-0050: has radio, has IR
 receiver, has IR transmitter
Apr 22 10:16:06 bender kernel: [    6.575563] cx88[0]: hauppauge eeprom: model=9
6019
Apr 22 10:16:06 bender kernel: [    6.589211] tuner-simple 6-0061: creating new 
instance
Apr 22 10:16:06 bender kernel: [    6.589214] tuner-simple 6-0061: type set to 7
8 (Philips FMD1216MEX MK3 Hybrid Tuner)
Apr 22 10:16:06 bender kernel: [    6.594644] cx88[0]/1: CX88x/0: ALSA support f
or cx2388x boards
Apr 22 10:16:06 bender kernel: [    6.594935] cx88[0]/2: cx2388x 8802 Driver Man
ager
Apr 22 10:16:06 bender kernel: [    6.594951] cx88-mpeg driver manager 0000:01:0
8.2: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
Apr 22 10:16:06 bender kernel: [    6.594957] cx88[0]/2: found at 0000:01:08.2, 
rev: 5, irq: 18, latency: 32, mmio: 0xfa000000
Apr 22 10:16:06 bender kernel: [    6.595312] cx8800 0000:01:08.0: PCI INT A -> 
Link[APC3] -> GSI 18 (level, low) -> IRQ 18
Apr 22 10:16:06 bender kernel: [    6.595318] cx88[0]/0: found at 0000:01:08.0, 
rev: 5, irq: 18, latency: 32, mmio: 0xf9000000
Apr 22 10:16:06 bender kernel: [    6.660348] cx88/2: cx2388x dvb driver version
 0.0.8 loaded
Apr 22 10:16:06 bender kernel: [    6.660351] cx88/2: registering cx8802 driver,
 type: dvb access: shared
Apr 22 10:16:06 bender kernel: [    6.660354] cx88[0]/2: subsystem: 0070:9601, b
oard: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56]
Apr 22 10:16:06 bender kernel: [    6.660358] cx88[0]/2: cx2388x based DVB/ATSC 
card
Apr 22 10:16:06 bender kernel: [    6.660360] cx8802_alloc_frontends() allocatin
g 1 frontend(s)
Apr 22 10:16:06 bender kernel: [    6.675396] wm8775 6-001b: chip found @ 0x36 (
cx88[0])
Apr 22 10:16:06 bender kernel: [    6.681667] cx88[0]/0: registered device video
0 [v4l2]
Apr 22 10:16:06 bender kernel: [    6.681691] cx88[0]/0: registered device vbi0
Apr 22 10:16:06 bender kernel: [    6.681714] cx88[0]/0: registered device radio
0
Apr 22 10:16:06 bender kernel: [    6.707602] tuner-simple 6-0061: attaching exi
sting instance
Apr 22 10:16:06 bender kernel: [    6.707606] tuner-simple 6-0061: couldn't set 
type to 63. Using 78 (Philips FMD1216MEX MK3 Hybrid Tuner) instead
Apr 22 10:16:06 bender kernel: [    6.711276] DVB: registering new adapter (cx88
[0])
Apr 22 10:16:06 bender kernel: [    6.711278] DVB: registering adapter 0 fronten
d 0 (Conexant CX22702 DVB-T)...
Apr 22 10:16:06 bender kernel: [    6.795961] cx2388x blackbird driver version 0
.0.8 loaded
Apr 22 10:16:06 bender kernel: [    6.795965] cx88/2: registering cx8802 driver,
 type: blackbird access: shared
Apr 22 10:16:06 bender kernel: [    6.795969] cx88[0]/2: subsystem: 0070:9601, b
oard: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56]
Apr 22 10:16:06 bender kernel: [    6.795973] cx88[0]/2: cx23416 based mpeg enco
der (blackbird reference design)
Apr 22 10:16:06 bender kernel: [    6.796196] cx88[0]/2-bb: Firmware and/or mail
box pointer not initialized or corrupted

Apr 22 10:16:06 bender kernel: [    9.193167] cx88[0]/2-bb: Firmware upload succ
essful.
Apr 22 10:16:06 bender kernel: [    9.201884] cx88[0]/2-bb: Firmware version is 
0x02060039
Apr 22 10:16:06 bender kernel: [    9.210072] cx88[0]/2: registered device video
1 [mpeg]

Apr 22 10:19:46 bender kernel: [  240.620375] INFO: task hald-probe-vide:2395 bl
ocked for more than 120 seconds.
Apr 22 10:19:46 bender kernel: [  240.620383] "echo 0 > /proc/sys/kernel/hung_ta
sk_timeout_secs" disables this message.
Apr 22 10:19:46 bender kernel: [  240.620390] hald-probe-vide D ffff880177559440
     0  2395   2361 0x00000004
Apr 22 10:19:46 bender kernel: [  240.620402]  ffff880177559440 0000000000000086
 ffff880177f78a48 ffff88017a0e21c0
Apr 22 10:19:46 bender kernel: [  240.620414]  0000000000013700 ffff880177f71fd8
 ffff880177f71fd8 0000000000013700
Apr 22 10:19:46 bender kernel: [  240.620424]  ffff880177559440 ffff880177f70010
 ffff880177f77228 0000000000000000
Apr 22 10:19:46 bender kernel: [  240.620434] Call Trace:
Apr 22 10:19:46 bender kernel: [  240.620450]  [<ffffffff8132609a>] ? __mutex_lo
ck_common+0x127/0x193
Apr 22 10:19:46 bender kernel: [  240.620462]  [<ffffffff81329ef1>] ? do_page_fa
ult+0x314/0x34c
Apr 22 10:19:46 bender kernel: [  240.620471]  [<ffffffff813261d2>] ? mutex_lock
+0x1a/0x33
Apr 22 10:19:46 bender kernel: [  240.620497]  [<ffffffffa03dc606>] ? video_rele
ase+0xae/0x160 [cx8800]
Apr 22 10:19:46 bender kernel: [  240.620515]  [<ffffffffa03a5226>] ? v4l2_relea
se+0x48/0x69 [videodev]
Apr 22 10:19:46 bender kernel: [  240.620525]  [<ffffffff810f8ce0>] ? fput+0xf9/
0x1ec
Apr 22 10:19:46 bender kernel: [  240.620534]  [<ffffffff810f618c>] ? filp_close
+0x5f/0x6a
Apr 22 10:19:46 bender kernel: [  240.620542]  [<ffffffff810f6229>] ? sys_close+
0x92/0xc6
Apr 22 10:19:46 bender kernel: [  240.620550]  [<ffffffff81009952>] ? system_cal
l_fastpath+0x16/0x1b
Apr 22 10:19:46 bender kernel: [  240.620558] INFO: task hald-probe-vide:2396 bl
ocked for more than 120 seconds.
Apr 22 10:19:46 bender kernel: [  240.620563] "echo 0 > /proc/sys/kernel/hung_ta
sk_timeout_secs" disables this message.
Apr 22 10:19:46 bender kernel: [  240.620569] hald-probe-vide D ffff88017900de80
     0  2396   2361 0x00000004
Apr 22 10:19:46 bender kernel: [  240.620579]  ffff88017900de80 0000000000000086
 ffff880100000000 ffff88017a06ca40
Apr 22 10:19:46 bender kernel: [  240.620589]  0000000000013700 ffff880177f91fd8
 ffff880177f91fd8 0000000000013700
Apr 22 10:19:46 bender kernel: [  240.620599]  ffff88017900de80 ffff880177f90010
 0000000100000000 0000000177f70000
Apr 22 10:19:46 bender kernel: [  240.620609] Call Trace:
Apr 22 10:19:46 bender kernel: [  240.620617]  [<ffffffff8132609a>] ? __mutex_lo
ck_common+0x127/0x193
Apr 22 10:19:46 bender kernel: [  240.620626]  [<ffffffff813261d2>] ? mutex_lock
+0x1a/0x33
Apr 22 10:19:46 bender kernel: [  240.620639]  [<ffffffffa03dd2ed>] ? video_open
+0x115/0x35c [cx8800]
Apr 22 10:19:46 bender kernel: [  240.620653]  [<ffffffffa03a55fd>] ? v4l2_open+
0xb3/0xdf [videodev]
Apr 22 10:19:46 bender kernel: [  240.620662]  [<ffffffff810fa8a6>] ? chrdev_ope
n+0x12a/0x148
Apr 22 10:19:46 bender kernel: [  240.620671]  [<ffffffff810fa77c>] ? chrdev_ope
n+0x0/0x148
Apr 22 10:19:46 bender kernel: [  240.620679]  [<ffffffff810f64ce>] ? __dentry_o
pen+0x15a/0x271
Apr 22 10:19:46 bender kernel: [  240.620687]  [<ffffffff810ff6db>] ? dget+0x12/
0x1e
Apr 22 10:19:46 bender kernel: [  240.620695]  [<ffffffff81101478>] ? finish_ope
n+0x97/0x15f
Apr 22 10:19:46 bender kernel: [  240.620704]  [<ffffffff811024a4>] ? do_path_lo
okup+0x5d/0xfc
Apr 22 10:19:46 bender kernel: [  240.620712]  [<ffffffff811031f4>] ? do_filp_op
en+0x171/0x5be
Apr 22 10:19:46 bender kernel: [  240.620721]  [<ffffffff81262426>] ? sys_getsoc
kname+0x91/0xbc
Apr 22 10:19:46 bender kernel: [  240.620731]  [<ffffffff8110bf72>] ? alloc_fd+0
x69/0x10b
Apr 22 10:19:46 bender kernel: [  240.620738]  [<ffffffff810f62b3>] ? do_sys_ope
n+0x56/0xda
Apr 22 10:19:46 bender kernel: [  240.620746]  [<ffffffff81009952>] ? system_cal
l_fastpath+0x16/0x1b
Apr 22 10:19:46 bender kernel: [  240.620753] INFO: task hald-probe-vide:2397 bl
ocked for more than 120 seconds.
Apr 22 10:19:46 bender kernel: [  240.620758] "echo 0 > /proc/sys/kernel/hung_ta
sk_timeout_secs" disables this message.
Apr 22 10:19:46 bender kernel: [  240.620763] hald-probe-vide D ffff88017900e540
     0  2397   2361 0x00000004
Apr 22 10:19:46 bender kernel: [  240.620773]  ffff88017900e540 0000000000000086
 ffff880100000001 ffff880175b58d80
Apr 22 10:19:46 bender kernel: [  240.620783]  0000000000013700 ffff880177fb3fd8
 ffff880177fb3fd8 0000000000013700
Apr 22 10:19:46 bender kernel: [  240.620792]  ffff88017900e540 ffff880177fb2010
 0000000100000000 0000000177f70000
Apr 22 10:19:46 bender kernel: [  240.620802] Call Trace:
Apr 22 10:19:46 bender kernel: [  240.620810]  [<ffffffff8132609a>] ? __mutex_lo
ck_common+0x127/0x193
Apr 22 10:19:46 bender kernel: [  240.620818]  [<ffffffff813261d2>] ? mutex_lock
+0x1a/0x33
Apr 22 10:19:46 bender kernel: [  240.620831]  [<ffffffffa03dd2ed>] ? video_open
+0x115/0x35c [cx8800]
Apr 22 10:19:46 bender kernel: [  240.620844]  [<ffffffffa03a55fd>] ? v4l2_open+
0xb3/0xdf [videodev]
Apr 22 10:19:46 bender kernel: [  240.620853]  [<ffffffff810fa8a6>] ? chrdev_ope
n+0x12a/0x148
Apr 22 10:19:46 bender kernel: [  240.620862]  [<ffffffff810fa77c>] ? chrdev_ope
n+0x0/0x148
Apr 22 10:19:46 bender kernel: [  240.620870]  [<ffffffff810f64ce>] ? __dentry_o
pen+0x15a/0x271
Apr 22 10:19:46 bender kernel: [  240.620877]  [<ffffffff810ff6db>] ? dget+0x12/
0x1e
Apr 22 10:19:46 bender kernel: [  240.620885]  [<ffffffff81101478>] ? finish_ope
n+0x97/0x15f
Apr 22 10:19:46 bender kernel: [  240.620893]  [<ffffffff811024a4>] ? do_path_lo
okup+0x5d/0xfc
Apr 22 10:19:46 bender kernel: [  240.620902]  [<ffffffff811031f4>] ? do_filp_op
en+0x171/0x5be
Apr 22 10:19:46 bender kernel: [  240.620910]  [<ffffffff81262426>] ? sys_getsoc
kname+0x91/0xbc
Apr 22 10:19:46 bender kernel: [  240.620918]  [<ffffffff8110bf72>] ? alloc_fd+0
x69/0x10b
Apr 22 10:19:46 bender kernel: [  240.620926]  [<ffffffff810f62b3>] ? do_sys_ope
n+0x56/0xda
Apr 22 10:19:46 bender kernel: [  240.620933]  [<ffffffff81009952>] ? system_cal
l_fastpath+0x16/0x1b
Apr 22 10:19:46 bender kernel: [  240.620941] INFO: task hald-probe-vide:2398 bl
ocked for more than 120 seconds.
Apr 22 10:19:46 bender kernel: [  240.620946] "echo 0 > /proc/sys/kernel/hung_ta
sk_timeout_secs" disables this message.
Apr 22 10:19:46 bender kernel: [  240.620951] hald-probe-vide D ffff880175b5e540
     0  2398   2361 0x00000004
Apr 22 10:19:46 bender kernel: [  240.620960]  ffff880175b5e540 0000000000000082
 ffff880175b5e540 ffff880176dfe540
Apr 22 10:19:46 bender kernel: [  240.620970]  0000000000013700 ffff880177fd3fd8
 ffff880177fd3fd8 0000000000013700
Apr 22 10:19:46 bender kernel: [  240.620979]  ffff880175b5e540 ffff880177fd2010
 0000000100000000 ffff880177fd2000
Apr 22 10:19:46 bender kernel: [  240.620989] Call Trace:
Apr 22 10:19:46 bender kernel: [  240.620997]  [<ffffffff8132609a>] ? __mutex_lo
ck_common+0x127/0x193
Apr 22 10:19:46 bender kernel: [  240.621005]  [<ffffffff813261d2>] ? mutex_lock
+0x1a/0x33
Apr 22 10:19:46 bender kernel: [  240.621017]  [<ffffffffa033a155>] ? cx8802_req
uest_acquire+0x66/0xc6 [cx8802]
Apr 22 10:19:46 bender kernel: [  240.621028]  [<ffffffffa03e67f2>] ? mpeg_open+
0x7a/0x1fc [cx88_blackbird]
Apr 22 10:19:46 bender kernel: [  240.621042]  [<ffffffffa03a55fd>] ? v4l2_open+
0xb3/0xdf [videodev]
Apr 22 10:19:46 bender kernel: [  240.621051]  [<ffffffff810fa8a6>] ? chrdev_ope
n+0x12a/0x148
Apr 22 10:19:46 bender kernel: [  240.621059]  [<ffffffff810fa77c>] ? chrdev_ope
n+0x0/0x148
Apr 22 10:19:46 bender kernel: [  240.621067]  [<ffffffff810f64ce>] ? __dentry_o
pen+0x15a/0x271
Apr 22 10:19:46 bender kernel: [  240.621074]  [<ffffffff810ff6db>] ? dget+0x12/
0x1e
Apr 22 10:19:46 bender kernel: [  240.621082]  [<ffffffff81101478>] ? finish_ope
n+0x97/0x15f
Apr 22 10:19:46 bender kernel: [  240.621090]  [<ffffffff811024a4>] ? do_path_lo
okup+0x5d/0xfc
Apr 22 10:19:46 bender kernel: [  240.621099]  [<ffffffff811031f4>] ? do_filp_op
en+0x171/0x5be
Apr 22 10:19:46 bender kernel: [  240.621107]  [<ffffffff81262426>] ? sys_getsoc
kname+0x91/0xbc
Apr 22 10:19:46 bender kernel: [  240.621116]  [<ffffffff8110bf72>] ? alloc_fd+0
x69/0x10b
Apr 22 10:19:46 bender kernel: [  240.621123]  [<ffffffff810f62b3>] ? do_sys_ope
n+0x56/0xda
Apr 22 10:19:46 bender kernel: [  240.621130]  [<ffffffff81009952>] ? system_cal
l_fastpath+0x16/0x1b

...


-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.38-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages hal depends on:
ii  adduser                      3.112+nmu2  add and remove users and groups
ii  dbus                         1.4.6-1     simple interprocess messaging syst
ii  hal-info                     20091130-1  Hardware Abstraction Layer - fdi f
ii  libblkid1                    2.17.2-9.1  block device id library
ii  libc6                        2.11.2-11   Embedded GNU C Library: Shared lib
ii  libdbus-1-3                  1.4.6-1     simple interprocess messaging syst
ii  libdbus-glib-1-2             0.92-1      simple interprocess messaging syst
ii  libexpat1                    2.0.1-7     XML parsing C library - runtime li
ii  libglib2.0-0                 2.28.6-1    The GLib library of C routines
ii  libhal-storage1              0.5.14-6    Hardware Abstraction Layer - share
ii  libhal1                      0.5.14-6    Hardware Abstraction Layer - share
ii  libusb-0.1-4                 2:0.1.12-17 userspace USB programming library
ii  lsb-base                     3.2-27      Linux Standard Base 3.2 init scrip
ii  mount                        2.17.2-9.1  Tools for mounting and manipulatin
ii  pciutils                     1:3.1.7-9   Linux PCI Utilities
ii  udev                         167-3       /dev/ and hotplug management daemo
ii  usbutils                     1:001-1     Linux USB utilities

Versions of packages hal recommends:
ii  consolekit      0.4.4-1                  framework for defining and trackin
ii  eject           2.1.5+deb1+cvs20081104-8 ejects CDs and operates CD-Changer
ii  pm-utils        1.4.1-8                  utilities and scripts for power ma

Versions of packages hal suggests:
pn  gnome-device-manager          <none>     (no description available)

-- no debconf information

-- debsums errors found:
prelink: /usr/bin/hal-disable-polling: at least one of file's dependencies has changed since prelinking
debsums: changed file /usr/bin/hal-disable-polling (from hal package)
prelink: /usr/bin/lshal: at least one of file's dependencies has changed since prelinking
debsums: changed file /usr/bin/lshal (from hal package)
prelink: /usr/lib/hal/hal-storage-cleanup-all-mountpoints: at least one of file's dependencies has changed since prelinking
debsums: changed file /usr/lib/hal/hal-storage-cleanup-all-mountpoints (from hal package)
prelink: /usr/lib/hal/hal-storage-cleanup-mountpoint: at least one of file's dependencies has changed since prelinking
debsums: changed file /usr/lib/hal/hal-storage-cleanup-mountpoint (from hal package)
prelink: /usr/lib/hal/hal-storage-closetray: at least one of file's dependencies has changed since prelinking
debsums: changed file /usr/lib/hal/hal-storage-closetray (from hal package)
prelink: /usr/lib/hal/hal-storage-eject: at least one of file's dependencies has changed since prelinking
debsums: changed file /usr/lib/hal/hal-storage-eject (from hal package)
prelink: /usr/lib/hal/hal-storage-mount: at least one of file's dependencies has changed since prelinking
debsums: changed file /usr/lib/hal/hal-storage-mount (from hal package)
prelink: /usr/lib/hal/hal-storage-unmount: at least one of file's dependencies has changed since prelinking
debsums: changed file /usr/lib/hal/hal-storage-unmount (from hal package)
prelink: /usr/lib/hal/hal-system-power-pm-is-supported: at least one of file's dependencies has changed since prelinking
debsums: changed file /usr/lib/hal/hal-system-power-pm-is-supported (from hal package)
prelink: /usr/lib/hal/hal-system-sonypic: at least one of file's dependencies has changed since prelinking
debsums: changed file /usr/lib/hal/hal-system-sonypic (from hal package)
prelink: /usr/lib/hal/hald-addon-cpufreq: at least one of file's dependencies has changed since prelinking
debsums: changed file /usr/lib/hal/hald-addon-cpufreq (from hal package)
prelink: /usr/lib/hal/hald-addon-generic-backlight: at least one of file's dependencies has changed since prelinking
debsums: changed file /usr/lib/hal/hald-addon-generic-backlight (from hal package)
prelink: /usr/lib/hal/hald-addon-hid-ups: at least one of file's dependencies has changed since prelinking
debsums: changed file /usr/lib/hal/hald-addon-hid-ups (from hal package)
prelink: /usr/lib/hal/hald-addon-imac-backlight: at least one of file's dependencies has changed since prelinking
debsums: changed file /usr/lib/hal/hald-addon-imac-backlight (from hal package)
prelink: /usr/lib/hal/hald-addon-leds: at least one of file's dependencies has changed since prelinking
debsums: changed file /usr/lib/hal/hald-addon-leds (from hal package)
prelink: /usr/lib/hal/hald-addon-pmu: at least one of file's dependencies has changed since prelinking
debsums: changed file /usr/lib/hal/hald-addon-pmu (from hal package)
prelink: /usr/lib/hal/hald-addon-rfkill-killswitch: at least one of file's dependencies has changed since prelinking
debsums: changed file /usr/lib/hal/hald-addon-rfkill-killswitch (from hal package)
prelink: /usr/lib/hal/hald-addon-storage: at least one of file's dependencies has changed since prelinking
debsums: changed file /usr/lib/hal/hald-addon-storage (from hal package)
prelink: /usr/lib/hal/hald-addon-usb-csr: at least one of file's dependencies has changed since prelinking
debsums: changed file /usr/lib/hal/hald-addon-usb-csr (from hal package)
prelink: /usr/lib/hal/hald-generate-fdi-cache: at least one of file's dependencies has changed since prelinking
debsums: changed file /usr/lib/hal/hald-generate-fdi-cache (from hal package)
prelink: /usr/lib/hal/hald-probe-printer: at least one of file's dependencies has changed since prelinking
debsums: changed file /usr/lib/hal/hald-probe-printer (from hal package)
prelink: /usr/lib/hal/hald-probe-storage: at least one of file's dependencies has changed since prelinking
debsums: changed file /usr/lib/hal/hald-probe-storage (from hal package)
debsums: missing file /usr/lib/hal/hald-probe-video4linux (from hal package)
prelink: /usr/lib/hal/hald-runner: at least one of file's dependencies has changed since prelinking
debsums: changed file /usr/lib/hal/hald-runner (from hal package)





More information about the Pkg-utopia-maintainers mailing list