[vdr-plugin-satip] 06/06: completely dropped README.Debian - it does not contain any Debian specific information

[Tobias Grimm]

This is an automated email from the git hooks/post-receive script.

tiber-guest pushed a commit to branch master
in repository vdr-plugin-satip.

commit 9688454edb230272e21a5d164a575ac695c5616f
Author: Tobias Grimm <etobi at debian.org>
Date:   Wed Dec 2 23:09:08 2015 +0100

    completely dropped README.Debian - it does not contain any Debian specific information
---
 debian/README.Debian | 60 ----------------------------------------------------
 debian/changelog     |  1 -
 2 files changed, 61 deletions(-)

diff --git a/debian/README.Debian b/debian/README.Debian
deleted file mode 100644
index d102808..0000000
--- a/debian/README.Debian
+++ /dev/null
@@ -1,60 +0,0 @@
-vdr-plugin-satip for Debian
----------------------------
-
-This plugin integrates SAT>IP network devices seamlessly into VDR.
-You can use any SAT>IP channel like any other normal DVB channel for
-live viewing, recording, etc. The plugin also features full section
-filtering capabilities which allow for example EIT information to be
-extracted from the incoming stream.
-
-Configuration:
-
-The plugin accepts a "devices" (-d) command-line parameter defaulting
-to two. This parameter defines how many simultaneous transponders can
-be received if there are available SAT>IP tuners.
-
-The plugin accepts also a "--server" (-s) command-line parameter, that
-can be used to manually configure static SAT>IP servers if autodetection
-via UPnP somehow can't be used. The parameter string is a semicolon
-separated list of "||" entries. The model
-consists of a DVB system (DVBS2,DVBT2,DVBT,DVBC) and number of available
-frontends separated by a hyphen:
-
-vdr -P 'satip -s ||;...'
-vdr -P 'satip -s 192.168.0.1|DVBS2-2,DVBT2-2|Octo1'
-vdr -P 'satip -s 192.168.0.1|DVBS2-4|Octo1;192.168.0.2|DVBT2-4|Octo2'
-
-Satellite positions shall be defined via sources.conf. If the source
-description begins with a number, it's used as SAT>IP signal source
-selection parameter. Otherwise, the default parameter is one:
-
-S19.2E  Astra 1KR/1L/1M/2C
-=> Signal source = 1
-
-S19.2E  2
-=> Signal source = 2
-
-S19.2E  3 Astra 1KR/1L/1M/2C
-=> Signal source = 3
-
-Notes:
-
-- The stream id "-1" states about unsuccessful tuning. This might be a
-  result of invalid channel parameters or lack of free SAT>IP tuners.
-
-- If the plugin doesn't detect your SAT>IP network device, make sure
-  your setup doesn't have firewalled the UDP port 1900.
-
-- Stream decryption requires a separate CAM plugin that works without
-  direct access to any DVB card devices. Also the integrated CAM slots
-  in Octopus Net devices are supported.
-
-- Tracing can be set on/off dynamically via command-line switch or
-  SVDRP command.
-
-- OctopusNet firmware 1.0.40 or greater recommended.
-
-- Inverto OEM firmware 1.17.0.120 or greater recommended.
-  The firmware 1.16.0.120 can be downloaded and installed
-  from their webpage: http://www.inverto.tv/support/
-  An update to a newer firmware should be offered afterwards.
diff --git a/debian/changelog b/debian/changelog
index 70666ad..f83f8af 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -2,7 +2,6 @@ vdr-plugin-satip (2.2.3-1) UNRELEASED; urgency=medium
 
   [ Frank Neumann ]
   * New upstream release
-  * adjusting debian/README.debian and debian/plugin.satip.conf
 
  -- Tobias Grimm <etobi at debian.org>  Wed, 02 Dec 2015 23:00:32 +0100
 

-- 
Alioth's /usr/local/bin/git-commit-notice on /srv/git.debian.org/git/pkg-vdr-dvb/vdr-plugin-satip.git