Bug#536894: vdr: VDR unloads 'budget_av' on startup

[Michael G. Hansen]

Package: vdr
Version: 1.6.0-10
Severity: important

I used to run vdr 1.6.0-8 without the problem described below, I have not tested 1.6.0-9.

When the system boots, the module 'budget_av' is loaded and I can watch TV on my "Mystique CaBiX-C2" card, for example with kaffeine.

However, when VDR is started, the 'budget_av' is unloaded and VDR does not receive any channels.
Watching TV with kaffeine only works again after 'modprobe budget_av'.

Relevant output of 'dmesg' on startup of VDR:
[ 1073.843428] saa7146: unregister extension 'budget_av'.
[ 1073.843837] budget_av 0000:01:05.0: PCI INT A disabled
VDR does not produce any messages in /var/log/messages related to this issue (only xineliboutput messages)

Relevant output of 'dmesg' on boot, loading of DVB-modules:
[    7.854787] Linux video capture interface: v2.00                                                                                             
[    7.938368] saa7146: register extension 'budget_av'.                                                                                         
[    7.938930] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 16                                                                                
[    7.938936]   alloc irq_desc for 16 on cpu 0 node 0                                                                                          
[    7.938938]   alloc kstat_irqs on cpu 0 node 0                                                                                               
[    7.938950] budget_av 0000:01:05.0: PCI INT A -> Link[LNKA] -> GSI 16 (level, low) -> IRQ 16                                                 
[    7.939033] IRQ 16/: IRQF_DISABLED is not guaranteed on shared IRQs                                                                          
[    7.939063] saa7146: found saa7146 @ mem ffffc200107bcc00 (revision 1, irq 16) (0x1894,0x002c).                                              
[    7.939071] saa7146 (0): dma buffer size 192512                                                                                              
[    7.939073] DVB: registering new adapter (Satelco EasyWatch DVB-C MK3)                                                                       
[    7.976932] adapter failed MAC signature check                                                                                               
[    7.976935] encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff                                          
[    8.240398] KNC1-0: MAC addr = 00:09:d6:6d:ab:c5                                                                                             
[    8.424940] DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)...                                                                
[    8.425066] budget-av: ci interface initialised.     

-- System Information:
Debian Release: squeeze/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.29-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages vdr depends on:
ii  adduser                       3.110      add and remove users and groups
ii  debconf [debconf-2.0]         1.5.27     Debian configuration management sy
ii  libc6                         2.9-20     GNU C Library: Shared libraries
ii  libcap2                       1:2.16-5   support for getting/setting POSIX.
ii  libfontconfig1                2.6.0-4    generic font configuration library
ii  libfreetype6                  2.3.9-5    FreeType 2 font engine, shared lib
ii  libgcc1                       1:4.4.0-10 GCC support library
ii  libjpeg62                     6b-14      The Independent JPEG Group's JPEG 
ii  libstdc++6                    4.4.0-10   The GNU Standard C++ Library v3
ii  psmisc                        22.7-1     utilities that use the proc file s

Versions of packages vdr recommends:
ii  lirc                          0.8.3-3    infra-red remote control support
ii  ttf-bitstream-vera            1.10-7     The Bitstream Vera family of free 

vdr suggests no packages.

-- debconf information:
* vdr/select_dvb_card: Cable
* vdr/showinfo:
* vdr/create_video_dir: true