Ready to use zaptel modules

[Diego Iastrubni]

Does this echo canceler really work for you? I have bad experience with 
all of them.

BTW, you can select the echo canceler from the make utility itself:

# available echo cancelers:
#CAN_STEVE
#CAN_STEVE2
#CAN_MARK
#CAN_MARK2 (D 1.2)
#CAN_MARK3
#CAN_KB1 (D 1.0)
#CAN_MG2
EC_TYPE=_CAN_MARK2
make EC_TYPE=$EC_TYPE V=0 KVERS=2.6.12-1-rapidbox2 || exit

Caio Begotti wrote:

>On Sunday 09 April 2006 18:47, Kilian Krause wrote:
>  
>
>>as you may have seen, the zaptel-modules are now autobuilt for SID (and
>>only there). So the resulting modules will be available as ready to
>>install packages in the archive within the hour from now.
>>    
>>
>
>Any chances to make the new MG2 echo canceler as default or at least make it 
>usable via uncommented patch? That's what I'm using right now:
>
>(a Digium's guy told me to just edit the zconfig.h file but it didn't work so 
>I had to change the Makefile and now I'm testing the new canceler fine)
>
>#! /bin/sh /usr/share/dpatch/dpatch-run
>## enable_mg2.dpatch by Caio Begotti <caio at ueberalles.net>
>##
>## All lines beginning with `## DP:' are a description of the patch.
>## DP: built in the new echo canceler based on KB1
>
>@DPATCH@
>diff -ruN zaptel-1.2.5.old/Makefile zaptel-1.2.5/Makefile
>--- zaptel-1.2.5.old/Makefile  2006-04-01 09:54:18.997597792 -0300
>+++ zaptel-1.2.5/Makefile      2006-04-01 09:55:02.129040816 -0300
>@@ -286,7 +286,7 @@
> gendigits: LDFLAGS+=-lm
>
> ifndef EC_TYPE
>-  EC_TYPE:=KB1
>+  EC_TYPE:=MG2
> endif
> # only for for 2.6 kernel:
> EXTRA_CFLAGS+=-DECHO_CAN_SET -DECHO_CAN_$(EC_TYPE)
>diff -ruN zaptel-1.2.5.old/zconfig.h zaptel-1.2.5/zconfig.h
>--- zaptel-1.2.5.old/zconfig.h 2006-04-01 09:54:18.984599768 -0300
>+++ zaptel-1.2.5/zconfig.h     2006-04-01 09:54:50.090870896 -0300
>@@ -47,19 +47,20 @@
>
> // you must define externally both ECHO_CAN_SET and ECHO_CAN_foo
> #ifndef ECHO_CAN_SET
>-#define ECHO_CAN_SET ECHO_CAN_KB1
>-#define ECHO_CAN_KB1
>+#define ECHO_CAN_SET ECHO_CAN_MG2
>+#define ECHO_CAN_MG2
> #endif
> /* #define ECHO_CAN_STEVE */
> /* #define ECHO_CAN_STEVE2 */
> /* #define ECHO_CAN_MARK */
> /* #define ECHO_CAN_MARK2 */
> /* #define ECHO_CAN_MARK3 */
>-/*#define ECHO_CAN_KB1 */
>+/* #define ECHO_CAN_KB1 */
> /* MG2 is a version of KB1 that has some changes to it that are
>  * supposed to improve how it performs.  If you have echo problems,
>  * try it out! */
>-/* #define ECHO_CAN_MG2 */
>+
>+#define ECHO_CAN_MG2
>
> /*
>  * Uncomment for aggressive residual echo supression under
>
>  
>