Bug#382604: zaptel: fails by post-install
Mark Purcell
msp at debian.org
Sat Aug 12 12:39:58 UTC 2006
Christoph,
On Saturday 12 August 2006 12:48, Christoph Kaminski wrote:
> 01:06.0 Network controller: Cologne Chip Designs GmbH ISDN network
> controller [HFC-PCI] (rev 02)
Thanks I think this is the nub of the problem.
Unfortunately I don't have access to ISDN hardware so won't be able to debug
too well remotely.
> cat /etc/zaptel.conf
> # hfc-s pci a span definition
> # most of the values should be bogus because we are not really zaptel
> loadzone=nl
> defaultzone=nl
>
> span=1,1,3,ccs,ami
> bchan=1-2
> dchan=3
This isn't shipped by the zaptel package, but is used by the package to gain
configuration details.. Did you provide this config yourself? OR did it come
with the hardware.
> Zaptel cards initial configuration: ZT_SPANCONFIG failed on span 1:
> Invalid argument (22)
It seems like the zaptel startup doesn't like the span=1,1,3,ccs,ami from your
config file. Did this work with previous versions?
I suspect is is failing on the ztcgf(8) command:
Can you run:
# ztcfg -vvvt
and forward the results.
Then I would suggest that you need to edit your modified zaptel.conf, until
ztcfg does run correctly.
I might return to shipping the default zaptel.conf file under /etc so that
when user mods are made it is brought to immediate attention. Although the
default doesn't cover a lot of cases, at least it is a starting point and
changes will be aparent.
Also the genzaptelconf(8) script, might be able to assist with the
regeneration of your zaptel.conf file, although we proably don't want to
automate the running of that just yet.
Mark
Mark
More information about the Pkg-voip-maintainers
mailing list