Bug#823952: dahdi-source: AXE400PL + linux 3.16.0-4-686-pae + dahdi 1:2.10.2-2
Carlos Martin
carlos at serconi.es
Tue May 10 16:54:46 UTC 2016
Package: dahdi-source
Version: 1:2.10.2~dfsg-1
Severity: important
Dear Maintainer,
This bug is near the same as #780997 but is not solved.
I'm using Debian jessie, I installed dahdi-source from jessie repos but I got an error when loading dahdi module, I try also upgrading to the unstable version, but I got the same error. So, I get this error with dahdi-source Version: 2.10.0.1 and Version: 2.10.2
When system loads dahdi module yo can see the message "Warning: Span WCTDM/4 didn't specify a spantype. Please fix driver!"
dahdi: Version: 2.10.2
dahdi: Telephony Interface Registered on major 196
dahdi: Warning: Span WCTDM/4 didn't specify a spantype. Please fix driver!
No freshmaker chip
Module 0: Installed -- AUTO FXS/DPO
Module 1: Installed -- AUTO FXO (FCC mode)
Module 2: Installed -- AUTO FXO (FCC mode)
Module 3: Installed -- AUTO FXO (FCC mode)
Found a Wildcard TDM: Wildcard TDM400P REV I (4 modules)
------------------------------
lshw -vv
02:00.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface
Subsystem: ATCOM Technology co., LTD. Device 0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (250ns min, 32000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at e000 [size=256]
Region 1: Memory at 91300000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=55mA PME(D0+,D1-,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: wctdm
-------------------------------
mod|grep dahdi
dahdi 206790 1 wctdm
crc_ccitt 12331 1 dahdi
-------------------------------
dahdi_cfg -vv
DAHDI Tools Version - 2.10.2
Timeout waiting for all spans to be assigned.
DAHDI Version: 2.10.2
Echo Canceller(s):
Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 01)
Channel 02: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 02)
Channel 03: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 03)
Channel 04: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 04)
4 channels to configure.
DAHDI_CHANCONFIG failed on channel 1: Invalid argument (22)
Selected signaling not supported
** And syslog says
dahdi_ioctl_chanconfig: No channel for number 1
--------------------------------
If you need me to make any tests or provide you further information please contact me.
Regards
-- System Information:
Debian Release: 8.4
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 3.16.0-4-686-pae (SMP w/4 CPU cores)
Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages dahdi-source depends on:
ii bzip2 1.0.6-7+b3
ii debhelper 9.20150101
ii module-assistant 0.11.7
Versions of packages dahdi-source recommends:
ii dahdi-linux 1:2.10.2~dfsg-1
dahdi-source suggests no packages.
-- no debconf information
More information about the Pkg-voip-maintainers
mailing list