[Pkg-xen-devel] Bug#721946: Bug#721946: xen-hypervisor-4.1-amd64: dom0_mem cannot exceed some value

[Ian Campbell]

On Fri, 2013-09-06 at 16:39 +0200, Alessandro Vesely wrote:

Both sets of log contain stuff like:

> Sep  6 15:22:53 pcale kernel: [  126.828195] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x80000 action 0x6 frozen
> Sep  6 15:22:53 pcale kernel: [  126.828199] ata4: SError: { 10B8B }
> Sep  6 15:22:53 pcale kernel: [  126.828201] ata4.00: failed command: SMART
> Sep  6 15:22:53 pcale kernel: [  126.828205] ata4.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0
> Sep  6 15:22:53 pcale kernel: [  126.828206]          res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> Sep  6 15:22:53 pcale kernel: [  126.828207] ata4.00: status: { DRDY }
> Sep  6 15:22:53 pcale kernel: [  126.828211] ata4: hard resetting link
> Sep  6 15:22:54 pcale kernel: [  127.320197] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> Sep  6 15:22:54 pcale kernel: [  127.321358] ata4.00: configured for UDMA/133
> Sep  6 15:22:54 pcale kernel: [  127.336200] ata4: EH complete 

Is your disk dying?

Does this happen if you boot the exact same Linux kernel without Xen
underneath?

Ian.