[Pkg-zfsonlinux-devel] Bug#958121: zfs-dkms: Cannot get ZFS to compile against BPO kernels
Paul Rensing
prensing at gmail.com
Sat Apr 18 18:43:50 BST 2020
Package: zfs-dkms
Version: 0.8.3-1~bpo10+1
Severity: important
Dear Maintainer,
* What led up to the situation?
Initial install of a system. I need ZFS compression so need the 0.8 ZFS. 0.8.3
will not compile against any of the kernel. For all kernels, I get error:
None of the expected "global page state" interfaces were detected.
Kernel versions installed:
linux-headers-4.19.0-8-amd64 4.19.98-1
linux-headers-4.19.0-8-common 4.19.98-1
linux-headers-5.4.0-0.bpo.2-amd64 5.4.8-1~bpo10+1
linux-headers-5.4.0-0.bpo.2-common 5.4.8-1~bpo10+1
linux-headers-5.4.0-0.bpo.3-amd64 5.4.13-1~bpo10+1
linux-headers-5.4.0-0.bpo.3-common 5.4.13-1~bpo10+1
linux-headers-5.4.0-0.bpo.4-amd64 5.4.19-1~bpo10+1
linux-headers-5.4.0-0.bpo.4-common 5.4.19-1~bpo10+1
linux-headers-686-pae
linux-headers-amd64 5.4.19-1~bpo10+1
linux-headers-generic
linux-image-4.19.0-8-amd64 4.19.98-1
linux-image-4.19.0-8-amd64-unsigned
linux-image-5.4.0-0.bpo.2-amd64 5.4.8-1~bpo10+1
linux-image-5.4.0-0.bpo.2-amd64-unsigned
linux-image-5.4.0-0.bpo.3-amd64 5.4.13-1~bpo10+1
linux-image-5.4.0-0.bpo.3-amd64-unsigned
linux-image-5.4.0-0.bpo.4-amd64 5.4.19-1~bpo10+1
linux-image-5.4.0-0.bpo.4-amd64-unsigned
linux-image-amd64 5.4.19-1~bpo10+1
linux-initramfs-tool
linux-kbuild-4.19 4.19.98-1
linux-kbuild-5.4 5.4.19-1~bpo10+1
* What exactly did you do (or not do) that was effective (or
ineffective)?
I tried the older kernels available in Backports, with the same outcome.
* What was the outcome of this action?
DKMS install failed.
* What outcome did you expect instead?
Success
-- System Information:
Debian Release: 10.2
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 5.4.0-0.bpo.4-amd64 (SMP w/12 CPU cores)
Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages zfs-dkms depends on:
ii debconf [debconf-2.0] 1.5.71
ii dkms 2.6.1-4
ii file 1:5.35-4+deb10u1
ii libc6-dev [libc-dev] 2.28-10
ii libpython3-stdlib 3.7.3-1
ii lsb-release 10.2019051400
ii perl 5.28.1-6
ii python3-distutils 3.7.3-1
Versions of packages zfs-dkms recommends:
ii linux-libc-dev 5.4.19-1~bpo10+1
iu zfs-zed 0.8.3-1~bpo10+1
ih zfsutils-linux 0.8.3-1~bpo10+1
Versions of packages zfs-dkms suggests:
pn debhelper <none>
-- debconf information:
zfs-dkms/stop-build-for-unknown-kernel: true
zfs-dkms/stop-build-for-32bit-kernel: true
* zfs-dkms/note-incompatible-licenses:
-------------- next part --------------
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by zfs configure 0.8.3, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ /var/lib/dkms/zfs/0.8.3/build/configure --prefix=/usr --with-config=kernel --with-linux=/lib/modules/5.4.0-0.bpo.4-amd64/build --with-linux-obj=/lib/modules/5.4.0-0.bpo.4-amd64/build --with-qat=
## --------- ##
## Platform. ##
## --------- ##
hostname = apollo
uname -m = x86_64
uname -r = 5.4.0-0.bpo.4-amd64
uname -s = Linux
uname -v = #1 SMP Debian 5.4.19-1~bpo10+1 (2020-03-09)
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /bin
PATH: /sbin
PATH: /usr/bin
PATH: /usr/sbin
PATH: /usr/lib/dkms
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2492: checking for gawk
configure:2508: found /usr/bin/gawk
configure:2519: result: gawk
configure:2530: checking metadata
configure:2719: result: META file
configure:2757: checking build system type
configure:2771: result: x86_64-pc-linux-gnu
configure:2791: checking host system type
configure:2804: result: x86_64-pc-linux-gnu
configure:2824: checking target system type
configure:2837: result: x86_64-pc-linux-gnu
configure:2865: checking whether to enable maintainer-specific portions of Makefiles
configure:2874: result: no
configure:2898: checking whether make supports nested variables
configure:2915: result: yes
configure:2942: checking for a BSD-compatible install
configure:3010: result: /usr/bin/install -c
configure:3021: checking whether build environment is sane
configure:3076: result: yes
configure:3225: checking for a thread-safe mkdir -p
configure:3264: result: /bin/mkdir -p
configure:3267: checking whether make sets $(MAKE)
configure:3289: result: yes
configure:3474: checking for gcc
configure:3490: found /usr/bin/gcc
configure:3501: result: gcc
configure:3730: checking for C compiler version
configure:3739: gcc --version >&5
gcc (Debian 8.3.0-6) 8.3.0
Copyright (C) 2018 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3750: $? = 0
configure:3739: gcc -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/8/lto-wrapper
OFFLOAD_TARGET_NAMES=nvptx-none
OFFLOAD_TARGET_DEFAULT=1
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Debian 8.3.0-6' --with-bugurl=file:///usr/share/doc/gcc-8/README.Bugs --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++ --prefix=/usr --with-gcc-major-version-only --program-suffix=-8 --program-prefix=x86_64-linux-gnu- --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --enable-bootstrap --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-libmpx --enable-plugin --enable-default-pie --with-system-zlib --with-target-system-zlib --enable-objc-gc=auto --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-offload-targets=nvptx-none --without-cuda-driver --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu
Thread model: posix
gcc version 8.3.0 (Debian 8.3.0-6)
configure:3750: $? = 0
configure:3739: gcc -V >&5
gcc: error: unrecognized command line option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:3750: $? = 1
configure:3739: gcc -qversion >&5
gcc: error: unrecognized command line option '-qversion'; did you mean '--version'?
gcc: fatal error: no input files
compilation terminated.
configure:3750: $? = 1
configure:3770: checking whether the C compiler works
configure:3792: gcc conftest.c >&5
configure:3796: $? = 0
configure:3844: result: yes
configure:3847: checking for C compiler default output file name
configure:3849: result: a.out
configure:3855: checking for suffix of executables
configure:3862: gcc -o conftest conftest.c >&5
configure:3866: $? = 0
configure:3888: result:
configure:3910: checking whether we are cross compiling
configure:3918: gcc -o conftest conftest.c >&5
configure:3922: $? = 0
configure:3929: ./conftest
configure:3933: $? = 0
configure:3921: result: no
configure:3926: checking for suffix of object files
configure:3948: gcc -c conftest.c >&5
configure:3952: $? = 0
configure:3973: result: o
configure:3977: checking whether we are using the GNU C compiler
configure:3996: gcc -c conftest.c >&5
configure:3996: $? = 0
configure:4005: result: yes
configure:4014: checking whether gcc accepts -g
configure:4034: gcc -c -g conftest.c >&5
configure:4034: $? = 0
configure:4075: result: yes
configure:4092: checking for gcc option to accept ISO C89
configure:4155: gcc -c -g -O2 conftest.c >&5
configure:4155: $? = 0
configure:4168: result: none needed
configure:4193: checking whether gcc understands -c and -o together
configure:4215: gcc -c conftest.c -o conftest2.o
configure:4218: $? = 0
configure:4215: gcc -c conftest.c -o conftest2.o
configure:4218: $? = 0
configure:4230: result: yes
configure:4250: checking whether make supports the include directive
configure:4265: make -f confmf.GNU && cat confinc.out
this is the am__doit target
configure:4268: $? = 0
configure:4287: result: yes (GNU style)
configure:4312: checking dependency style of gcc
configure:4423: result: none
configure:4484: checking how to print strings
configure:4511: result: printf
configure:4532: checking for a sed that does not truncate output
configure:4596: result: /bin/sed
configure:4614: checking for grep that handles long lines and -e
configure:4672: result: /bin/grep
configure:4677: checking for egrep
configure:4739: result: /bin/grep -E
configure:4744: checking for fgrep
configure:4806: result: /bin/grep -F
configure:4841: checking for ld used by gcc
configure:4908: result: /usr/bin/ld
configure:4915: checking if the linker (/usr/bin/ld) is GNU ld
configure:4930: result: yes
configure:4942: checking for BSD- or MS-compatible name lister (nm)
configure:4996: result: /usr/bin/nm -B
configure:5126: checking the name lister (/usr/bin/nm -B) interface
configure:5133: gcc -c -g -O2 conftest.c >&5
configure:5136: /usr/bin/nm -B "conftest.o"
configure:5139: output
0000000000000000 B some_variable
configure:5140: result: BSD nm
configure:5143: checking whether ln -s works
configure:5147: result: yes
configure:5155: checking the maximum length of command line arguments
configure:5286: result: 1572864
configure:5334: checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format
configure:5374: result: func_convert_file_noop
configure:5381: checking how to convert x86_64-pc-linux-gnu file names to toolchain format
configure:5401: result: func_convert_file_noop
configure:5408: checking for /usr/bin/ld option to reload object files
configure:5415: result: -r
configure:5489: checking for objdump
configure:5505: found /usr/bin/objdump
configure:5516: result: objdump
configure:5548: checking how to recognize dependent libraries
configure:5748: result: pass_all
configure:5833: checking for dlltool
configure:5863: result: no
configure:5893: checking how to associate runtime and link libraries
configure:5920: result: printf %s\n
configure:5981: checking for ar
configure:5997: found /usr/bin/ar
configure:6008: result: ar
configure:6045: checking for archiver @FILE support
configure:6062: gcc -c -g -O2 conftest.c >&5
configure:6062: $? = 0
configure:6065: ar cru libconftest.a @conftest.lst >&5
ar: `u' modifier ignored since `D' is the default (see `U')
configure:6068: $? = 0
configure:6073: ar cru libconftest.a @conftest.lst >&5
ar: `u' modifier ignored since `D' is the default (see `U')
ar: conftest.o: No such file or directory
configure:6076: $? = 1
configure:6075: result: @
configure:6133: checking for strip
configure:6149: found /usr/bin/strip
configure:6160: result: strip
configure:6232: checking for ranlib
configure:6248: found /usr/bin/ranlib
configure:6259: result: ranlib
configure:6361: checking command to parse /usr/bin/nm -B output from gcc object
configure:6514: gcc -c -g -O2 conftest.c >&5
configure:6517: $? = 0
configure:6521: /usr/bin/nm -B conftest.o | sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' | sed '/ __gnu_lto/d' > conftest.nm
configure:6587: gcc -o conftest -g -O2 conftest.c conftstm.o >&5
configure:6590: $? = 0
configure:6628: result: ok
configure:6675: checking for sysroot
configure:6705: result: no
configure:6712: checking for a working dd
configure:6750: result: /bin/dd
configure:6754: checking how to truncate binary pipes
configure:6769: result: /bin/dd bs=4096 count=1
configure:6905: gcc -c -g -O2 conftest.c >&5
configure:6908: $? = 0
configure:7098: checking for mt
configure:7114: found /bin/mt
configure:7125: result: mt
configure:7148: checking if mt is a manifest tool
configure:7154: mt '-?'
configure:7162: result: no
configure:7839: checking how to run the C preprocessor
configure:7870: gcc -E conftest.c
configure:7870: $? = 0
configure:7884: gcc -E conftest.c
conftest.c:22:10: fatal error: ac_nonexistent.h: No such file or directory
#include <ac_nonexistent.h>
^~~~~~~~~~~~~~~~~~
compilation terminated.
configure:7884: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "zfs"
| #define PACKAGE_TARNAME "zfs"
| #define PACKAGE_VERSION "0.8.3"
| #define PACKAGE_STRING "zfs 0.8.3"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define ZFS_META_NAME "zfs"
| #define ZFS_META_VERSION "0.8.3"
| #define SPL_META_VERSION ZFS_META_VERSION
| #define ZFS_META_RELEASE "1~bpo10+1"
| #define SPL_META_RELEASE ZFS_META_RELEASE
| #define ZFS_META_LICENSE "CDDL"
| #define ZFS_META_ALIAS "zfs-0.8.3-1~bpo10+1"
| #define SPL_META_ALIAS ZFS_META_ALIAS
| #define ZFS_META_AUTHOR "OpenZFS on Linux"
| #define ZFS_META_KVER_MIN "2.6.32"
| #define ZFS_META_KVER_MAX "5.4"
| #define PACKAGE "zfs"
| #define VERSION "0.8.3"
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:7909: result: gcc -E
configure:7929: gcc -E conftest.c
configure:7929: $? = 0
configure:7943: gcc -E conftest.c
conftest.c:22:10: fatal error: ac_nonexistent.h: No such file or directory
#include <ac_nonexistent.h>
^~~~~~~~~~~~~~~~~~
compilation terminated.
configure:7943: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "zfs"
| #define PACKAGE_TARNAME "zfs"
| #define PACKAGE_VERSION "0.8.3"
| #define PACKAGE_STRING "zfs 0.8.3"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define ZFS_META_NAME "zfs"
| #define ZFS_META_VERSION "0.8.3"
| #define SPL_META_VERSION ZFS_META_VERSION
| #define ZFS_META_RELEASE "1~bpo10+1"
| #define SPL_META_RELEASE ZFS_META_RELEASE
| #define ZFS_META_LICENSE "CDDL"
| #define ZFS_META_ALIAS "zfs-0.8.3-1~bpo10+1"
| #define SPL_META_ALIAS ZFS_META_ALIAS
| #define ZFS_META_AUTHOR "OpenZFS on Linux"
| #define ZFS_META_KVER_MIN "2.6.32"
| #define ZFS_META_KVER_MAX "5.4"
| #define PACKAGE "zfs"
| #define VERSION "0.8.3"
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:7972: checking for ANSI C header files
configure:7992: gcc -c -g -O2 conftest.c >&5
configure:7992: $? = 0
configure:8065: gcc -o conftest -g -O2 conftest.c >&5
configure:8065: $? = 0
configure:8065: ./conftest
configure:8065: $? = 0
configure:8076: result: yes
configure:8089: checking for sys/types.h
configure:8089: gcc -c -g -O2 conftest.c >&5
configure:8089: $? = 0
configure:8089: result: yes
configure:8089: checking for sys/stat.h
configure:8089: gcc -c -g -O2 conftest.c >&5
configure:8089: $? = 0
configure:8089: result: yes
configure:8089: checking for stdlib.h
configure:8089: gcc -c -g -O2 conftest.c >&5
configure:8089: $? = 0
configure:8089: result: yes
configure:8089: checking for string.h
configure:8089: gcc -c -g -O2 conftest.c >&5
configure:8089: $? = 0
configure:8089: result: yes
configure:8089: checking for memory.h
configure:8089: gcc -c -g -O2 conftest.c >&5
configure:8089: $? = 0
configure:8089: result: yes
configure:8089: checking for strings.h
configure:8089: gcc -c -g -O2 conftest.c >&5
configure:8089: $? = 0
configure:8089: result: yes
configure:8089: checking for inttypes.h
configure:8089: gcc -c -g -O2 conftest.c >&5
configure:8089: $? = 0
configure:8089: result: yes
configure:8089: checking for stdint.h
configure:8089: gcc -c -g -O2 conftest.c >&5
configure:8089: $? = 0
configure:8089: result: yes
configure:8089: checking for unistd.h
configure:8089: gcc -c -g -O2 conftest.c >&5
configure:8089: $? = 0
configure:8089: result: yes
configure:8103: checking for dlfcn.h
configure:8103: gcc -c -g -O2 conftest.c >&5
configure:8103: $? = 0
configure:8103: result: yes
configure:8359: checking for objdir
configure:8374: result: .libs
configure:8638: checking if gcc supports -fno-rtti -fno-exceptions
configure:8656: gcc -c -g -O2 -fno-rtti -fno-exceptions conftest.c >&5
cc1: warning: command line option '-fno-rtti' is valid for C++/ObjC++ but not for C
configure:8660: $? = 0
configure:8673: result: no
configure:9031: checking for gcc option to produce PIC
configure:9038: result: -fPIC -DPIC
configure:9046: checking if gcc PIC flag -fPIC -DPIC works
configure:9064: gcc -c -g -O2 -fPIC -DPIC -DPIC conftest.c >&5
configure:9068: $? = 0
configure:9081: result: yes
configure:9110: checking if gcc static flag -static works
configure:9138: result: yes
configure:9153: checking if gcc supports -c -o file.o
configure:9174: gcc -c -g -O2 -o out/conftest2.o conftest.c >&5
configure:9178: $? = 0
configure:9200: result: yes
configure:9208: checking if gcc supports -c -o file.o
configure:9255: result: yes
configure:9288: checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries
configure:10551: result: yes
configure:10588: checking whether -lc should be explicitly linked in
configure:10596: gcc -c -g -O2 conftest.c >&5
configure:10599: $? = 0
configure:10614: gcc -shared -fPIC -DPIC conftest.o -v -Wl,-soname -Wl,conftest -o conftest 2\>\&1 \| /bin/grep -lc \>/dev/null 2\>\&1
configure:10617: $? = 0
configure:10631: result: no
configure:10791: checking dynamic linker characteristics
configure:11372: gcc -o conftest -g -O2 -Wl,-rpath -Wl,/foo conftest.c >&5
configure:11372: $? = 0
configure:11621: result: GNU/Linux ld.so
configure:11743: checking how to hardcode library paths into programs
configure:11768: result: immediate
configure:12316: checking whether stripping libraries is possible
configure:12321: result: yes
configure:12356: checking if libtool supports shared libraries
configure:12358: result: yes
configure:12361: checking whether to build shared libraries
configure:12386: result: yes
configure:12389: checking whether to build static libraries
configure:12393: result: yes
configure:9260: checking for pkg-config
configure:9278: found /usr/bin/pkg-config
configure:9290: result: /usr/bin/pkg-config
configure:9315: checking pkg-config is at least version 0.9.0
configure:9318: result: yes
configure:9335: checking dependency style of gcc
configure:9444: result: none
configure:9473: checking whether to build with code coverage support
configure:9493: result: no
configure:9840: checking how to create a pax tar archive
configure:9851: tar --version
tar (GNU tar) 1.30
Copyright (C) 2017 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <https://gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Written by John Gilmore and Jay Fenlason.
configure:9854: $? = 0
configure:9894: tardir=conftest.dir && eval tar --format=posix -chf - "$tardir" >conftest.tar
configure:9897: $? = 0
configure:9901: tar -xf - <conftest.tar
configure:9904: $? = 0
configure:9906: cat conftest.dir/file
GrepMe
configure:9909: $? = 0
configure:9922: result: gnutar
configure:9930: checking zfs author
configure:9932: result: OpenZFS on Linux
configure:9935: checking zfs license
configure:9937: result: CDDL
configure:9979: checking for ld
configure:10107: result: /usr/bin/ld -m elf_x86_64
configure:10114: checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld
configure:10129: result: yes
configure:10136: checking for shared library run path origin
configure:10149: result: done
configure:10170: checking 32-bit host C ABI
configure:10208: gcc -c -g -O2 conftest.c >&5
configure:10208: $? = 0
configure:10395: result: no
configure:10432: checking for the common suffixes of directories in the library search path
configure:10483: result: lib,lib
configure:10983: checking for iconv
configure:11007: gcc -o conftest -g -O2 conftest.c >&5
configure:11007: $? = 0
configure:11041: result: yes
configure:11044: checking for working iconv
configure:11185: gcc -o conftest -g -O2 conftest.c >&5
configure:11185: $? = 0
configure:11185: ./conftest
configure:11185: $? = 0
configure:11197: result: yes
configure:11225: checking for iconv declaration
configure:11254: gcc -c -g -O2 conftest.c >&5
configure:11254: $? = 0
configure:11264: result: extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
configure:11277: checking whether NLS is requested
configure:11286: result: yes
configure:11326: checking for msgfmt
configure: trying /usr/bin/msgfmt...
0 translated messages.
configure:11358: result: /usr/bin/msgfmt
configure:11367: checking for gmsgfmt
configure:11398: result: /usr/bin/msgfmt
configure:11443: checking for xgettext
configure: trying /usr/bin/xgettext...
/usr/bin/xgettext: warning: file '/dev/null' extension '' is unknown; will try C
configure:11475: result: /usr/bin/xgettext
configure:11520: checking for msgmerge
configure: trying /usr/bin/msgmerge...
configure:11551: result: /usr/bin/msgmerge
configure:11601: checking zfs config
configure:11603: result: kernel
configure:11609: checking whether gcc supports -Wno-unused-but-set-variable
configure:11626: gcc -c -g -O2 -Wunused-but-set-variable conftest.c >&5
configure:11626: $? = 0
configure:11629: result: yes
configure:11645: checking whether gcc supports -Wno-bool-compare
configure:11662: gcc -c -g -O2 -Wbool-compare conftest.c >&5
configure:11662: $? = 0
configure:11665: result: yes
configure:11681: checking whether gcc supports -Wframe-larger-than=<size>
configure:11698: gcc -c -g -O2 -Wframe-larger-than=4096 conftest.c >&5
configure:11698: $? = 0
configure:11701: result: yes
configure:11717: checking whether gcc supports -Wno-format-truncation
configure:11734: gcc -c -g -O2 -Wno-format-truncation conftest.c >&5
configure:11734: $? = 0
configure:11737: result: yes
configure:11753: checking whether gcc supports -fno-omit-frame-pointer
configure:11770: gcc -c -g -O2 -fno-omit-frame-pointer conftest.c >&5
configure:11770: $? = 0
configure:11773: result: yes
configure:11789: checking whether to build with -fsanitize=address support
configure:11809: result: no
configure:11857: checking whether host toolchain supports SSE
configure:11869: gcc -o conftest -g -O2 conftest.c >&5
configure:11869: $? = 0
configure:11874: result: yes
configure:11887: checking whether host toolchain supports SSE2
configure:11899: gcc -o conftest -g -O2 conftest.c >&5
configure:11899: $? = 0
configure:11904: result: yes
configure:11917: checking whether host toolchain supports SSE3
configure:11930: gcc -o conftest -g -O2 conftest.c >&5
configure:11930: $? = 0
configure:11935: result: yes
configure:11948: checking whether host toolchain supports SSSE3
configure:11960: gcc -o conftest -g -O2 conftest.c >&5
configure:11960: $? = 0
configure:11965: result: yes
configure:11978: checking whether host toolchain supports SSE4.1
configure:11990: gcc -o conftest -g -O2 conftest.c >&5
configure:11990: $? = 0
configure:11995: result: yes
configure:12008: checking whether host toolchain supports SSE4.2
configure:12020: gcc -o conftest -g -O2 conftest.c >&5
configure:12020: $? = 0
configure:12025: result: yes
configure:12038: checking whether host toolchain supports AVX
configure:12051: gcc -o conftest -g -O2 conftest.c >&5
configure:12051: $? = 0
configure:12053: result: yes
configure:12069: checking whether host toolchain supports AVX2
configure:12082: gcc -o conftest -g -O2 conftest.c >&5
configure:12082: $? = 0
configure:12084: result: yes
configure:12100: checking whether host toolchain supports AVX512F
configure:12113: gcc -o conftest -g -O2 conftest.c >&5
configure:12113: $? = 0
configure:12115: result: yes
configure:12131: checking whether host toolchain supports AVX512CD
configure:12144: gcc -o conftest -g -O2 conftest.c >&5
configure:12144: $? = 0
configure:12146: result: yes
configure:12162: checking whether host toolchain supports AVX512DQ
configure:12175: gcc -o conftest -g -O2 conftest.c >&5
configure:12175: $? = 0
configure:12177: result: yes
configure:12193: checking whether host toolchain supports AVX512BW
configure:12206: gcc -o conftest -g -O2 conftest.c >&5
configure:12206: $? = 0
configure:12208: result: yes
configure:12224: checking whether host toolchain supports AVX512IFMA
configure:12237: gcc -o conftest -g -O2 conftest.c >&5
configure:12237: $? = 0
configure:12239: result: yes
configure:12255: checking whether host toolchain supports AVX512VBMI
configure:12268: gcc -o conftest -g -O2 conftest.c >&5
configure:12268: $? = 0
configure:12270: result: yes
configure:12286: checking whether host toolchain supports AVX512PF
configure:12299: gcc -o conftest -g -O2 conftest.c >&5
configure:12299: $? = 0
configure:12301: result: yes
configure:12317: checking whether host toolchain supports AVX512ER
configure:12330: gcc -o conftest -g -O2 conftest.c >&5
configure:12330: $? = 0
configure:12332: result: yes
configure:12348: checking whether host toolchain supports AVX512VL
configure:12361: gcc -o conftest -g -O2 conftest.c >&5
configure:12361: $? = 0
configure:12363: result: yes
configure:12379: checking whether host toolchain supports AES
configure:12392: gcc -o conftest -g -O2 conftest.c >&5
configure:12392: $? = 0
configure:12394: result: yes
configure:12410: checking whether host toolchain supports PCLMULQDQ
configure:12423: gcc -o conftest -g -O2 conftest.c >&5
configure:12423: $? = 0
configure:12425: result: yes
configure:12444: checking for target asm dir
configure:12482: result: asm-x86_64
configure:12501: checking for python3
configure:12517: found /usr/bin/python3
configure:12528: result: python3
configure:12618: checking for python version
configure:12625: result: 3.7
configure:12637: checking for python platform
configure:12644: result: linux
configure:12670: checking for python script directory
configure:12705: result: ${prefix}/lib/python3.7/site-packages
configure:12714: checking for python extension module directory
configure:12749: result: ${exec_prefix}/lib/python3.7/site-packages
configure:12887: checking for python3.7
configure:12905: found /usr/bin/python3.7
configure:12917: result: /usr/bin/python3.7
configure:12943: checking for a version of Python >= '2.1.0'
configure:12969: result: yes
configure:12977: checking for a version of Python >= '3.4.0'
configure:12983: result: yes
configure:13006: checking for the distutils Python package
configure:13010: result: yes
configure:13032: checking for Python include path
configure:13048: result: -I/usr/include/python3.7m
configure:13055: checking for Python library path
configure:13140: result: -L/usr/lib -lpython3.7m
configure:13147: checking for Python site-packages path
configure:13153: result: /usr/lib/python3/dist-packages
configure:13160: checking python extra libraries
configure:13167: result: -lcrypt -lpthread -ldl -lutil -lm
configure:13174: checking python extra linking flags
configure:13181: result: -Xlinker -export-dynamic -Wl,-O1 -Wl,-Bsymbolic-functions
configure:13188: checking consistency of all components of python development environment
configure:13216: gcc -o conftest -g -O2 -I/usr/include/python3.7m -Xlinker -export-dynamic -Wl,-O1 -Wl,-Bsymbolic-functions conftest.c -L/usr/lib -lpython3.7m -lcrypt -lpthread -ldl -lutil -lm -lcrypt -lpthread -ldl -lutil -lm >&5
conftest.c:57:12: fatal error: Python.h: No such file or directory
#include <Python.h>
^~~~~~~~~~
compilation terminated.
configure:13216: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "zfs"
| #define PACKAGE_TARNAME "zfs"
| #define PACKAGE_VERSION "0.8.3"
| #define PACKAGE_STRING "zfs 0.8.3"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define ZFS_META_NAME "zfs"
| #define ZFS_META_VERSION "0.8.3"
| #define SPL_META_VERSION ZFS_META_VERSION
| #define ZFS_META_RELEASE "1~bpo10+1"
| #define SPL_META_RELEASE ZFS_META_RELEASE
| #define ZFS_META_LICENSE "CDDL"
| #define ZFS_META_ALIAS "zfs-0.8.3-1~bpo10+1"
| #define SPL_META_ALIAS ZFS_META_ALIAS
| #define ZFS_META_AUTHOR "OpenZFS on Linux"
| #define ZFS_META_KVER_MIN "2.6.32"
| #define ZFS_META_KVER_MAX "5.4"
| #define PACKAGE "zfs"
| #define VERSION "0.8.3"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| #define HAVE_ICONV 1
| #define ICONV_CONST
| #define HAVE_SSE 1
| #define HAVE_SSE2 1
| #define HAVE_SSE3 1
| #define HAVE_SSSE3 1
| #define HAVE_SSE4_1 1
| #define HAVE_SSE4_2 1
| #define HAVE_AVX 1
| #define HAVE_AVX2 1
| #define HAVE_AVX512F 1
| #define HAVE_AVX512CD 1
| #define HAVE_AVX512DQ 1
| #define HAVE_AVX512BW 1
| #define HAVE_AVX512IFMA 1
| #define HAVE_AVX512VBMI 1
| #define HAVE_AVX512PF 1
| #define HAVE_AVX512ER 1
| #define HAVE_AVX512VL 1
| #define HAVE_AES 1
| #define HAVE_PCLMULQDQ 1
| #define HAVE_PYTHON "3.7"
| /* end confdefs.h. */
|
| #include <Python.h>
| int
| main ()
| {
| Py_Initialize();
| ;
| return 0;
| }
|
configure:13234: result: no
configure:13344: checking whether to enable pyzfs:
configure:13346: result: no
configure:13368: checking kernel source directory
configure:13411: result: /lib/modules/5.4.0-0.bpo.4-amd64/build
configure:13422: checking kernel build directory
configure:13449: result: /lib/modules/5.4.0-0.bpo.4-amd64/build
configure:13452: checking kernel source version
configure:13504: result: 5.4.0-0.bpo.4-amd64
configure:13517: checking kernel file name for module symbols
configure:13547: result: Module.symvers
configure:13648: checking whether modules can be built
configure:13707:
KBUILD_MODPOST_NOFINAL= KBUILD_MODPOST_WARN=
make modules -k -j12 -C /lib/modules/5.4.0-0.bpo.4-amd64/build
M=/var/lib/dkms/zfs/0.8.3/build/build/conftest &>build/conftest/build.log
configure:13710: $? = 0
configure:13713: test -f build/conftest/conftest.ko
configure:13716: $? = 0
configure:13719: result: yes
configure:13768: gcc -o conftest -g -O2 conftest.c >&5
conftest.c:58:14: fatal error: /lib/modules/5.4.0-0.bpo.4-amd64/build/include/linux/license.h: No such file or directory
#include "/lib/modules/5.4.0-0.bpo.4-amd64/build/include/linux/license.h"
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
configure:13768: $? = 1
configure: program exited with status 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "zfs"
| #define PACKAGE_TARNAME "zfs"
| #define PACKAGE_VERSION "0.8.3"
| #define PACKAGE_STRING "zfs 0.8.3"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define ZFS_META_NAME "zfs"
| #define ZFS_META_VERSION "0.8.3"
| #define SPL_META_VERSION ZFS_META_VERSION
| #define ZFS_META_RELEASE "1~bpo10+1"
| #define SPL_META_RELEASE ZFS_META_RELEASE
| #define ZFS_META_LICENSE "CDDL"
| #define ZFS_META_ALIAS "zfs-0.8.3-1~bpo10+1"
| #define SPL_META_ALIAS ZFS_META_ALIAS
| #define ZFS_META_AUTHOR "OpenZFS on Linux"
| #define ZFS_META_KVER_MIN "2.6.32"
| #define ZFS_META_KVER_MAX "5.4"
| #define PACKAGE "zfs"
| #define VERSION "0.8.3"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| #define HAVE_ICONV 1
| #define ICONV_CONST
| #define HAVE_SSE 1
| #define HAVE_SSE2 1
| #define HAVE_SSE3 1
| #define HAVE_SSSE3 1
| #define HAVE_SSE4_1 1
| #define HAVE_SSE4_2 1
| #define HAVE_AVX 1
| #define HAVE_AVX2 1
| #define HAVE_AVX512F 1
| #define HAVE_AVX512CD 1
| #define HAVE_AVX512DQ 1
| #define HAVE_AVX512BW 1
| #define HAVE_AVX512IFMA 1
| #define HAVE_AVX512VBMI 1
| #define HAVE_AVX512PF 1
| #define HAVE_AVX512ER 1
| #define HAVE_AVX512VL 1
| #define HAVE_AES 1
| #define HAVE_PCLMULQDQ 1
| #define HAVE_PYTHON "3.7"
| /* end confdefs.h. */
|
|
| #include "/lib/modules/5.4.0-0.bpo.4-amd64/build/include/linux/license.h"
|
| int
| main ()
| {
|
| return !license_is_gpl_compatible(
| "CDDL");
|
| ;
| return 0;
| }
|
configure:14259: checking for kernel config option compatibility
configure:14268:
KBUILD_MODPOST_NOFINAL=yes KBUILD_MODPOST_WARN=
make modules -k -j12 -C /lib/modules/5.4.0-0.bpo.4-amd64/build
M=/var/lib/dkms/zfs/0.8.3/build/build &>build/build.log
configure:14271: $? = 0
configure:14274: test -f build/build.log
configure:14277: $? = 0
configure:14307:
KBUILD_MODPOST_NOFINAL= KBUILD_MODPOST_WARN=yes
make modules -k -j12 -C /lib/modules/5.4.0-0.bpo.4-amd64/build
M=/var/lib/dkms/zfs/0.8.3/build/build/config_debug_lock_alloc_license &>build/config_debug_lock_alloc_license/build.log
configure:14310: $? = 0
configure:14313: test -f build/config_debug_lock_alloc_license/build.log
configure:14316: $? = 0
configure:14351:
KBUILD_MODPOST_NOFINAL= KBUILD_MODPOST_WARN=yes
make modules -k -j12 -C /lib/modules/5.4.0-0.bpo.4-amd64/build
M=/var/lib/dkms/zfs/0.8.3/build/build &>build/build.log
configure:14354: $? = 0
configure:14357: test -f build/build.log
configure:14360: $? = 0
configure:14389: result: done
configure:14393: checking whether kernel was built with 16K or larger stacks
configure:14400: result: yes
configure:14424: checking whether mutex_lock() is GPL-only
configure:14431: result: no
configure:14457: checking whether CONFIG_TRIM_UNUSED_KSYM is disabled
configure:14464: result: yes
configure:14492: checking whether CONFIG_ZLIB_INFLATE is defined
configure:14499: result: yes
configure:14523: checking whether CONFIG_ZLIB_DEFLATE is defined
configure:14530: result: yes
configure:14556: checking whether fpu headers are available
configure:14619:
KBUILD_MODPOST_NOFINAL= KBUILD_MODPOST_WARN=
make modules -k -j12 -C /lib/modules/5.4.0-0.bpo.4-amd64/build
M=/var/lib/dkms/zfs/0.8.3/build/build/conftest &>build/conftest/build.log
configure:14622: $? = 0
configure:14625: test -f build/conftest/conftest.ko
configure:14628: $? = 0
configure:14634: result: asm/fpu/api.h
configure:14648: checking whether wait_queue_entry_t exists
configure:14711:
KBUILD_MODPOST_NOFINAL= KBUILD_MODPOST_WARN=
make modules -k -j12 -C /lib/modules/5.4.0-0.bpo.4-amd64/build
M=/var/lib/dkms/zfs/0.8.3/build/build/conftest &>build/conftest/build.log
configure:14714: $? = 0
configure:14717: test -f build/conftest/conftest.ko
configure:14720: $? = 0
configure:14723: result: yes
configure:14740: checking whether /dev/zfs minor is available
configure:14747: result: 249
configure:14766: checking whether DECLARE_EVENT_CLASS() is available
configure:14868:
KBUILD_MODPOST_NOFINAL= KBUILD_MODPOST_WARN=
make modules -k -j12 -C /lib/modules/5.4.0-0.bpo.4-amd64/build
M=/var/lib/dkms/zfs/0.8.3/build/build/conftest &>build/conftest/build.log
configure:14871: $? = 2
configure:14874: test -f build/conftest/conftest.ko
configure:14877: $? = 1
configure:14888: result: no
configure:34768: checking for available kernel interfaces
configure:34777:
KBUILD_MODPOST_NOFINAL=yes KBUILD_MODPOST_WARN=
make modules -k -j12 -C /lib/modules/5.4.0-0.bpo.4-amd64/build
M=/var/lib/dkms/zfs/0.8.3/build/build &>build/build.log
configure:34780: $? = 2
configure:34783: test -f build/build.log
configure:34786: $? = 0
configure:34816:
KBUILD_MODPOST_NOFINAL= KBUILD_MODPOST_WARN=yes
make modules -k -j12 -C /lib/modules/5.4.0-0.bpo.4-amd64/build
M=/var/lib/dkms/zfs/0.8.3/build/build/bio_set_dev_license &>build/bio_set_dev_license/build.log
configure:34819: $? = 2
configure:34822: test -f build/bio_set_dev_license/build.log
configure:34825: $? = 0
configure:34816:
KBUILD_MODPOST_NOFINAL= KBUILD_MODPOST_WARN=yes
make modules -k -j12 -C /lib/modules/5.4.0-0.bpo.4-amd64/build
M=/var/lib/dkms/zfs/0.8.3/build/build/blk_queue_write_cache_license &>build/blk_queue_write_cache_license/build.log
configure:34819: $? = 2
configure:34822: test -f build/blk_queue_write_cache_license/build.log
configure:34825: $? = 0
configure:34816:
KBUILD_MODPOST_NOFINAL= KBUILD_MODPOST_WARN=yes
make modules -k -j12 -C /lib/modules/5.4.0-0.bpo.4-amd64/build
M=/var/lib/dkms/zfs/0.8.3/build/build/posix_acl_release_license &>build/posix_acl_release_license/build.log
configure:34819: $? = 2
configure:34822: test -f build/posix_acl_release_license/build.log
configure:34825: $? = 0
configure:34816:
KBUILD_MODPOST_NOFINAL= KBUILD_MODPOST_WARN=yes
make modules -k -j12 -C /lib/modules/5.4.0-0.bpo.4-amd64/build
M=/var/lib/dkms/zfs/0.8.3/build/build/set_cached_acl_license &>build/set_cached_acl_license/build.log
configure:34819: $? = 0
configure:34822: test -f build/set_cached_acl_license/build.log
configure:34825: $? = 0
configure:34816:
KBUILD_MODPOST_NOFINAL= KBUILD_MODPOST_WARN=yes
make modules -k -j12 -C /lib/modules/5.4.0-0.bpo.4-amd64/build
M=/var/lib/dkms/zfs/0.8.3/build/build/kernel_fpu_license &>build/kernel_fpu_license/build.log
configure:34819: $? = 2
configure:34822: test -f build/kernel_fpu_license/build.log
configure:34825: $? = 0
configure:34860:
KBUILD_MODPOST_NOFINAL= KBUILD_MODPOST_WARN=yes
make modules -k -j12 -C /lib/modules/5.4.0-0.bpo.4-amd64/build
M=/var/lib/dkms/zfs/0.8.3/build/build &>build/build.log
configure:34863: $? = 0
configure:34866: test -f build/build.log
configure:34869: $? = 0
configure:34898: result: done
configure:34903: checking whether access_ok() has 'type' parameter
configure:34918: result: no
configure:34935: checking whether global_node_page_state() exists
configure:34942: result: yes
configure:34966: checking whether global_zone_page_state() exists
configure:34973: result: yes
configure:34998: checking whether enum node_stat_item contains NR_FILE_PAGES
configure:35001: ./scripts/enum-extract.pl node_stat_item /lib/modules/5.4.0-0.bpo.4-amd64/build/include/linux/mmzone.h | egrep -qx NR_FILE_PAGES
Can't open /lib/modules/5.4.0-0.bpo.4-amd64/build/include/linux/mmzone.h: No such file or directory at ./scripts/enum-extract.pl line 26.
configure:35004: $? = 1
configure:35016: result: no
configure:35022: checking whether enum node_stat_item contains NR_INACTIVE_ANON
configure:35025: ./scripts/enum-extract.pl node_stat_item /lib/modules/5.4.0-0.bpo.4-amd64/build/include/linux/mmzone.h | egrep -qx NR_INACTIVE_ANON
Can't open /lib/modules/5.4.0-0.bpo.4-amd64/build/include/linux/mmzone.h: No such file or directory at ./scripts/enum-extract.pl line 26.
configure:35028: $? = 1
configure:35040: result: no
configure:35046: checking whether enum node_stat_item contains NR_INACTIVE_FILE
configure:35049: ./scripts/enum-extract.pl node_stat_item /lib/modules/5.4.0-0.bpo.4-amd64/build/include/linux/mmzone.h | egrep -qx NR_INACTIVE_FILE
Can't open /lib/modules/5.4.0-0.bpo.4-amd64/build/include/linux/mmzone.h: No such file or directory at ./scripts/enum-extract.pl line 26.
configure:35052: $? = 1
configure:35064: result: no
configure:35070: checking whether enum node_stat_item contains NR_SLAB_RECLAIMABLE
configure:35073: ./scripts/enum-extract.pl node_stat_item /lib/modules/5.4.0-0.bpo.4-amd64/build/include/linux/mmzone.h | egrep -qx NR_SLAB_RECLAIMABLE
Can't open /lib/modules/5.4.0-0.bpo.4-amd64/build/include/linux/mmzone.h: No such file or directory at ./scripts/enum-extract.pl line 26.
configure:35076: $? = 1
configure:35088: result: no
configure:35095: checking whether enum zone_stat_item contains NR_FILE_PAGES
configure:35098: ./scripts/enum-extract.pl zone_stat_item /lib/modules/5.4.0-0.bpo.4-amd64/build/include/linux/mmzone.h | egrep -qx NR_FILE_PAGES
Can't open /lib/modules/5.4.0-0.bpo.4-amd64/build/include/linux/mmzone.h: No such file or directory at ./scripts/enum-extract.pl line 26.
configure:35101: $? = 1
configure:35113: result: no
configure:35119: checking whether enum zone_stat_item contains NR_INACTIVE_ANON
configure:35122: ./scripts/enum-extract.pl zone_stat_item /lib/modules/5.4.0-0.bpo.4-amd64/build/include/linux/mmzone.h | egrep -qx NR_INACTIVE_ANON
Can't open /lib/modules/5.4.0-0.bpo.4-amd64/build/include/linux/mmzone.h: No such file or directory at ./scripts/enum-extract.pl line 26.
configure:35125: $? = 1
configure:35137: result: no
configure:35143: checking whether enum zone_stat_item contains NR_INACTIVE_FILE
configure:35146: ./scripts/enum-extract.pl zone_stat_item /lib/modules/5.4.0-0.bpo.4-amd64/build/include/linux/mmzone.h | egrep -qx NR_INACTIVE_FILE
Can't open /lib/modules/5.4.0-0.bpo.4-amd64/build/include/linux/mmzone.h: No such file or directory at ./scripts/enum-extract.pl line 26.
configure:35149: $? = 1
configure:35161: result: no
configure:35167: checking whether enum zone_stat_item contains NR_SLAB_RECLAIMABLE
configure:35170: ./scripts/enum-extract.pl zone_stat_item /lib/modules/5.4.0-0.bpo.4-amd64/build/include/linux/mmzone.h | egrep -qx NR_SLAB_RECLAIMABLE
Can't open /lib/modules/5.4.0-0.bpo.4-amd64/build/include/linux/mmzone.h: No such file or directory at ./scripts/enum-extract.pl line 26.
configure:35173: $? = 1
configure:35185: result: no
configure:35192: checking whether global_page_state enums are sane
configure:35222: result: no
configure:35224: result: NR_FILE_PAGES in either node_stat_item or zone_stat_item: NOT FOUND
configure:35227: error:
*** None of the expected "global page state" interfaces were detected.
*** This may be because your kernel version is newer than what is
*** supported, or you are using a patched custom kernel with
*** incompatible modifications.
***
*** ZFS Version: zfs-0.8.3-1~bpo10+1
*** Compatible Kernels: 2.6.32 - 5.4
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_build=x86_64-pc-linux-gnu
ac_cv_c_compiler_gnu=yes
ac_cv_env_CCASFLAGS_set=
ac_cv_env_CCASFLAGS_value=
ac_cv_env_CCAS_set=
ac_cv_env_CCAS_value=
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=
ac_cv_env_CFLAGS_value=
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_LIBTIRPC_CFLAGS_set=
ac_cv_env_LIBTIRPC_CFLAGS_value=
ac_cv_env_LIBTIRPC_LIBS_set=
ac_cv_env_LIBTIRPC_LIBS_value=
ac_cv_env_LT_SYS_LIBRARY_PATH_set=
ac_cv_env_LT_SYS_LIBRARY_PATH_value=
ac_cv_env_PKG_CONFIG_LIBDIR_set=
ac_cv_env_PKG_CONFIG_LIBDIR_value=
ac_cv_env_PKG_CONFIG_PATH_set=
ac_cv_env_PKG_CONFIG_PATH_value=
ac_cv_env_PKG_CONFIG_set=
ac_cv_env_PKG_CONFIG_value=
ac_cv_env_PYTHON_VERSION_set=
ac_cv_env_PYTHON_VERSION_value=
ac_cv_env_PYTHON_set=
ac_cv_env_PYTHON_value=
ac_cv_env_TEST_JOBS_set=
ac_cv_env_TEST_JOBS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_header_dlfcn_h=yes
ac_cv_header_inttypes_h=yes
ac_cv_header_memory_h=yes
ac_cv_header_stdc=yes
ac_cv_header_stdint_h=yes
ac_cv_header_stdlib_h=yes
ac_cv_header_string_h=yes
ac_cv_header_strings_h=yes
ac_cv_header_sys_stat_h=yes
ac_cv_header_sys_types_h=yes
ac_cv_header_unistd_h=yes
ac_cv_host=x86_64-pc-linux-gnu
ac_cv_objext=o
ac_cv_path_EGREP='/bin/grep -E'
ac_cv_path_FGREP='/bin/grep -F'
ac_cv_path_GMSGFMT=/usr/bin/msgfmt
ac_cv_path_GREP=/bin/grep
ac_cv_path_MSGFMT=/usr/bin/msgfmt
ac_cv_path_MSGMERGE=/usr/bin/msgmerge
ac_cv_path_PYTHON=/usr/bin/python3.7
ac_cv_path_SED=/bin/sed
ac_cv_path_XGETTEXT=/usr/bin/xgettext
ac_cv_path_ac_pt_PKG_CONFIG=/usr/bin/pkg-config
ac_cv_path_install='/usr/bin/install -c'
ac_cv_path_lt_DD=/bin/dd
ac_cv_path_mkdir=/bin/mkdir
ac_cv_prog_AWK=gawk
ac_cv_prog_CPP='gcc -E'
ac_cv_prog_PYTHON=python3
ac_cv_prog_ac_ct_AR=ar
ac_cv_prog_ac_ct_CC=gcc
ac_cv_prog_ac_ct_MANIFEST_TOOL=mt
ac_cv_prog_ac_ct_OBJDUMP=objdump
ac_cv_prog_ac_ct_RANLIB=ranlib
ac_cv_prog_ac_ct_STRIP=strip
ac_cv_prog_cc_c89=
ac_cv_prog_cc_g=yes
ac_cv_prog_make_make_set=yes
ac_cv_target=x86_64-pc-linux-gnu
acl_cv_libdirstems=lib,lib
acl_cv_prog_gnu_ld=yes
acl_cv_rpath=done
am_cv_CCAS_dependencies_compiler_type=none
am_cv_CC_dependencies_compiler_type=none
am_cv_func_iconv=yes
am_cv_func_iconv_works=yes
am_cv_lib_iconv=no
am_cv_make_support_nested_variables=yes
am_cv_prog_cc_c_o=yes
am_cv_prog_tar_pax=gnutar
am_cv_proto_iconv='extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);'
am_cv_proto_iconv_arg1=
am_cv_python_platform=linux
am_cv_python_pyexecdir='${exec_prefix}/lib/python3.7/site-packages'
am_cv_python_pythondir='${prefix}/lib/python3.7/site-packages'
am_cv_python_version=3.7
gl_cv_host_cpu_c_abi_32bit=no
lt_cv_ar_at_file=@
lt_cv_archive_cmds_need_lc=no
lt_cv_deplibs_check_method=pass_all
lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=
lt_cv_ld_reload_flag=-r
lt_cv_nm_interface='BSD nm'
lt_cv_objdir=.libs
lt_cv_path_LD=/usr/bin/ld
lt_cv_path_NM='/usr/bin/nm -B'
lt_cv_path_mainfest_tool=no
lt_cv_prog_compiler_c_o=yes
lt_cv_prog_compiler_pic='-fPIC -DPIC'
lt_cv_prog_compiler_pic_works=yes
lt_cv_prog_compiler_rtti_exceptions=no
lt_cv_prog_compiler_static_works=yes
lt_cv_prog_gnu_ld=yes
lt_cv_sharedlib_from_linklib_cmd='printf %s\n'
lt_cv_shlibpath_overrides_runpath=yes
lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'\'' | sed '\''/ __gnu_lto/d'\'''
lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \(.*\) .*$/ {"\1", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(.*\)$/ {"\1", (void *) \&\1},/p'\'''
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e '\''s/^: \(.*\) .*$/ {"\1", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(lib.*\)$/ {"\1", (void *) \&\1},/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(.*\)$/ {"lib\1", (void *) \&\1},/p'\'''
lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^T .* \(.*\)$/extern int \1();/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(.*\)$/extern char \1;/p'\'''
lt_cv_sys_global_symbol_to_import=
lt_cv_sys_max_cmd_len=1572864
lt_cv_to_host_file_cmd=func_convert_file_noop
lt_cv_to_tool_file_cmd=func_convert_file_noop
lt_cv_truncate_bin='/bin/dd bs=4096 count=1'
## ----------------- ##
## Output variables. ##
## ----------------- ##
@echo "Need to reconfigure with --enable-code-coverage"
@echo "Need to reconfigure with --enable-code-coverage"
$(CODE_COVERAGE_IGNORE_PATTERN);
$(CODE_COVERAGE_OUTPUT_FILE);
#
#
# $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage)
# $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info)
# (Default: $(top_builddir))
# (Default: empty)
# Multiple directories may be specified, separated by whitespace.
# by lcov for code coverage. (Default:
# collecting lcov instance. (Default: $CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH)
# genhtml instance. (Default: based on $CODE_COVERAGE_BRANCH_COVERAGE)
# instance. (Default: $CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT)
# instance. (Default: $CODE_COVERAGE_LCOV_OPTIONS_DEFAULT)
# instance. (Default: $CODE_COVERAGE_LCOV_RMOPTS_DEFAULT)
# instances. (Default: $CODE_COVERAGE_LCOV_SHOPTS_DEFAULT)
# instances. (Default: based on $CODE_COVERAGE_BRANCH_COVERAGE)
# lcov instance. (Default: empty)
# reports to be created. (Default:
# set to 0 to disable it and leave empty to stay with the default.
# - CODE_COVERAGE_BRANCH_COVERAGE: Set to 1 to enforce branch coverage,
# - CODE_COVERAGE_DIRECTORY: Top-level directory for code coverage reporting.
# - CODE_COVERAGE_GENHTML_OPTIONS: Extra options to pass to the genhtml
# - CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT: Extra options to pass to the
# - CODE_COVERAGE_IGNORE_PATTERN: Extra glob pattern of files to ignore
# - CODE_COVERAGE_LCOV_OPTIONS: Extra options to pass to the collecting lcov
# - CODE_COVERAGE_LCOV_OPTIONS_DEFAULT: Extra options to pass to the
# - CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH: --gcov-tool pathtogcov
# - CODE_COVERAGE_LCOV_RMOPTS: Extra options to pass to the filtering lcov
# - CODE_COVERAGE_LCOV_RMOPTS_DEFAULT: Extra options to pass to the filtering
# - CODE_COVERAGE_LCOV_SHOPTS: Extra options to shared between both lcov
# - CODE_COVERAGE_LCOV_SHOPTS_DEFAULT: Extra options shared between both lcov
# - CODE_COVERAGE_OUTPUT_DIRECTORY: Directory for generated code coverage
# - CODE_COVERAGE_OUTPUT_FILE: Filename and path for the .info file generated
# $(PACKAGE_VERSION). In order to add the current git hash to the title,
# Capture code coverage data
# Code coverage
# Hook rule executed before code-coverage-capture, overridable by the user
# Optional variables
# Optional:
# The generated report will be titled using the $(PACKAGE_NAME) and
# Use recursive makes in order to ignore errors during check
# sanitizes the test-name: replaces with underscores: dashes and dots
# use the git-version-gen script, available online.
$(if $(CODE_COVERAGE_BRANCH_COVERAGE),\
'
--rc genhtml_branch_coverage=$(CODE_COVERAGE_BRANCH_COVERAGE))
--rc lcov_branch_coverage=$(CODE_COVERAGE_BRANCH_COVERAGE))
.PHONY: check-code-coverage code-coverage-capture code-coverage-capture-hook code-coverage-clean
ACLOCAL='${SHELL} /var/lib/dkms/zfs/0.8.3/build/config/missing aclocal-1.16'
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='$${TAR-tar}'
AM_BACKSLASH='\'
AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
AM_DEFAULT_VERBOSITY='0'
AM_DISTCHECK_CONFIGURE_FLAGS += --disable-code-coverage
AM_DISTCHECK_CONFIGURE_FLAGS ?=
AM_V='$(V)'
AR='ar'
ASAN_CFLAGS=''
ASAN_ENABLED='no'
ASAN_ENABLED_FALSE=''
ASAN_ENABLED_TRUE='#'
ASAN_LDFLAGS=''
ASAN_ZFS='_without_asan'
AUTOCONF='${SHELL} /var/lib/dkms/zfs/0.8.3/build/config/missing autoconf'
AUTOHEADER='${SHELL} /var/lib/dkms/zfs/0.8.3/build/config/missing autoheader'
AUTOMAKE='${SHELL} /var/lib/dkms/zfs/0.8.3/build/config/missing automake-1.16'
AWK='gawk'
CC='gcc'
CCAS='gcc'
CCASDEPMODE='depmode=none'
CCASFLAGS='-g -O2'
CCDEPMODE='depmode=none'
CFLAGS='-g -O2'
CODE_COVERAGE_BRANCH_COVERAGE ?=
CODE_COVERAGE_CFLAGS=''
CODE_COVERAGE_CPPFLAGS=''
CODE_COVERAGE_CXXFLAGS=''
CODE_COVERAGE_DIRECTORY ?= $(top_builddir)
CODE_COVERAGE_ENABLED='no'
CODE_COVERAGE_ENABLED_FALSE=''
CODE_COVERAGE_ENABLED_TRUE='#'
CODE_COVERAGE_GENHTML_OPTIONS ?= $(CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT)
CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT ?=\
CODE_COVERAGE_IGNORE_PATTERN ?=
CODE_COVERAGE_LCOV_OPTIONS ?= $(CODE_COVERAGE_LCOV_OPTIONS_DEFAULT)
CODE_COVERAGE_LCOV_OPTIONS_DEFAULT ?= $(CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH)
CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH ?= --gcov-tool "$(GCOV)"
CODE_COVERAGE_LCOV_RMOPTS ?= $(CODE_COVERAGE_LCOV_RMOPTS_DEFAULT)
CODE_COVERAGE_LCOV_RMOPTS_DEFAULT ?=
CODE_COVERAGE_LCOV_SHOPTS ?= $(CODE_COVERAGE_LCOV_SHOPTS_DEFAULT)
CODE_COVERAGE_LCOV_SHOPTS_DEFAULT ?= $(if $(CODE_COVERAGE_BRANCH_COVERAGE),\
CODE_COVERAGE_LDFLAGS=''
CODE_COVERAGE_LIBS=''
CODE_COVERAGE_OUTPUT_DIRECTORY ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage
CODE_COVERAGE_OUTPUT_FILE ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info
CODE_COVERAGE_RULES='
CONFIG_KERNEL_FALSE=''
CONFIG_KERNEL_TRUE=''
CONFIG_QAT_FALSE=''
CONFIG_QAT_TRUE=''
CONFIG_USER_FALSE=''
CONFIG_USER_TRUE=''
CPP='gcc -E'
CPPFLAGS=''
CYGPATH_W='echo'
DEBUGINFO_ZFS=''
DEBUG_CFLAGS=''
DEBUG_CPPFLAGS=''
DEBUG_KMEM_TRACKING_ZFS=''
DEBUG_KMEM_ZFS=''
DEBUG_LDFLAGS=''
DEBUG_ZFS=''
DEFINE_PYTHON_PKG_VERSION=''
DEFINE_PYTHON_VERSION=''
DEFINE_PYZFS=''
DEFINE_SYSTEMD=''
DEFS=''
DEPDIR='.deps'
DLLTOOL='false'
DSYMUTIL=''
DUMPBIN=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP='/bin/grep -E'
EXEEXT=''
FGREP='/bin/grep -F'
FRAME_LARGER_THAN='-Wframe-larger-than=4096'
GCOV=''
GENHTML=''
GETTEXT_MACRO_VERSION='0.20'
GITIGNOREFILES += $(CODE_COVERAGE_OUTPUT_FILE) $(CODE_COVERAGE_OUTPUT_DIRECTORY)
GITIGNOREFILES ?=
GMSGFMT='/usr/bin/msgfmt'
GMSGFMT_015='/usr/bin/msgfmt'
GREP='/bin/grep'
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
INTLLIBS=''
INTL_MACOSX_LIBS=''
KERNEL_DEBUG_CFLAGS=''
KERNEL_DEBUG_CPPFLAGS=''
KERNEL_MAKE=''
LCOV=''
LD='/usr/bin/ld -m elf_x86_64'
LDFLAGS=''
LIBAIO=''
LIBBLKID=''
LIBICONV=''
LIBINTL=''
LIBOBJS=''
LIBS=''
LIBSSL=''
LIBTIRPC_CFLAGS=''
LIBTIRPC_LIBS=''
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
LIBUDEV=''
LIBUUID=''
LINUX='/lib/modules/5.4.0-0.bpo.4-amd64/build'
LINUX_OBJ='/lib/modules/5.4.0-0.bpo.4-amd64/build'
LINUX_SYMBOLS='Module.symvers'
LINUX_VERSION='5.4.0-0.bpo.4-amd64'
LIPO=''
LN_S='ln -s'
LTLIBICONV=''
LTLIBINTL=''
LTLIBOBJS=''
LT_SYS_LIBRARY_PATH=''
MAINT='#'
MAINTAINER_MODE_FALSE=''
MAINTAINER_MODE_TRUE='#'
MAKEINFO='${SHELL} /var/lib/dkms/zfs/0.8.3/build/config/missing makeinfo'
MANIFEST_TOOL=':'
MKDIR_P='/bin/mkdir -p'
MSGFMT='/usr/bin/msgfmt'
MSGMERGE='/usr/bin/msgmerge'
MSGMERGE_FOR_MSGFMT_OPTION='--no-fuzzy-matching --no-location --quiet'
NM='/usr/bin/nm -B'
NMEDIT=''
NO_BOOL_COMPARE='-Wno-bool-compare'
NO_FORMAT_TRUNCATION='-Wno-format-truncation'
NO_OMIT_FRAME_POINTER='-fno-omit-frame-pointer'
NO_UNUSED_BUT_SET_VARIABLE='-Wno-unused-but-set-variable'
OBJDUMP='objdump'
OBJEXT='o'
OTOOL64=''
OTOOL=''
PACKAGE='zfs'
PACKAGE_BUGREPORT=''
PACKAGE_NAME='zfs'
PACKAGE_STRING='zfs 0.8.3'
PACKAGE_TARNAME='zfs'
PACKAGE_URL=''
PACKAGE_VERSION='0.8.3'
PATH_SEPARATOR=':'
PKG_CONFIG='/usr/bin/pkg-config'
PKG_CONFIG_LIBDIR=''
PKG_CONFIG_PATH=''
POSUB=''
PYTHON='/usr/bin/python3.7'
PYTHON_CPPFLAGS='-I/usr/include/python3.7m'
PYTHON_EXEC_PREFIX='${exec_prefix}'
PYTHON_EXTRA_LDFLAGS='-Xlinker -export-dynamic -Wl,-O1 -Wl,-Bsymbolic-functions'
PYTHON_EXTRA_LIBS='-lcrypt -lpthread -ldl -lutil -lm'
PYTHON_LIBS='-L/usr/lib -lpython3.7m'
PYTHON_PLATFORM='linux'
PYTHON_PREFIX='${prefix}'
PYTHON_SITE_PKG='/usr/lib/python3/dist-packages'
PYTHON_VERSION='3.7'
PYZFS_ENABLED='no'
PYZFS_ENABLED_FALSE=''
PYZFS_ENABLED_TRUE='#'
QAT_OBJ=''
QAT_SRC=''
QAT_SYMBOLS=''
RANLIB='ranlib'
RELEASE='1~bpo10+1'
RM='rm -f'
SED='/bin/sed'
SET_MAKE=''
SHELL='/bin/bash'
STRIP='strip'
TARGET_ASM_DIR='asm-x86_64'
TARGET_ASM_GENERIC_FALSE=''
TARGET_ASM_GENERIC_TRUE='#'
TARGET_ASM_I386_FALSE=''
TARGET_ASM_I386_TRUE='#'
TARGET_ASM_X86_64_FALSE='#'
TARGET_ASM_X86_64_TRUE=''
TEST_JOBS='12'
USE_NLS='yes'
USING_PYTHON_2_FALSE=''
USING_PYTHON_2_TRUE='#'
USING_PYTHON_3_FALSE='#'
USING_PYTHON_3_TRUE=''
USING_PYTHON_FALSE='#'
USING_PYTHON_TRUE=''
VERSION='0.8.3'
WANT_DEVNAME2DEVID_FALSE=''
WANT_DEVNAME2DEVID_TRUE=''
WANT_MMAP_LIBAIO_FALSE=''
WANT_MMAP_LIBAIO_TRUE=''
XGETTEXT='/usr/bin/xgettext'
XGETTEXT_015='/usr/bin/xgettext'
XGETTEXT_EXTRA_OPTIONS=''
ZFS_CONFIG='kernel'
ZFS_INIT_SYSTEMD=''
ZFS_INIT_SYSV=''
ZFS_META_ALIAS='zfs-0.8.3-1~bpo10+1'
ZFS_META_AUTHOR='OpenZFS on Linux'
ZFS_META_DATA=''
ZFS_META_KVER_MAX='5.4'
ZFS_META_KVER_MIN='2.6.32'
ZFS_META_LICENSE='CDDL'
ZFS_META_LT_AGE=''
ZFS_META_LT_CURRENT=''
ZFS_META_LT_REVISION=''
ZFS_META_NAME='zfs'
ZFS_META_RELEASE='1~bpo10+1'
ZFS_META_VERSION='0.8.3'
ZFS_MODULE_LOAD=''
ZLIB=''
ZONENAME=''
ac_ct_AR='ar'
ac_ct_CC='gcc'
ac_ct_DUMPBIN=''
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE=''
am__fastdepCCAS_FALSE=''
am__fastdepCCAS_TRUE='#'
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE='#'
am__include='include'
am__isrc=''
am__leading_dot='.'
am__nodep='_no'
am__quote=''
am__tar='tar --format=posix -chf - "$$tardir"'
am__untar='tar -xf -'
bindir='${exec_prefix}/bin'
build='x86_64-pc-linux-gnu'
build_alias=''
build_cpu='x86_64'
build_os='linux-gnu'
build_vendor='pc'
check-code-coverage:
code-coverage-capture-hook:
code-coverage-capture: code-coverage-capture-hook
code_coverage_quiet = $(code_coverage_quiet_$(V))
code_coverage_quiet_ = $(code_coverage_quiet_$(AM_DEFAULT_VERBOSITY))
code_coverage_quiet_0 = --quiet
code_coverage_sanitize = $(subst -,_,$(subst .,_,$(1)))
code_coverage_v_genhtml = $(code_coverage_v_genhtml_$(V))
code_coverage_v_genhtml_ = $(code_coverage_v_genhtml_$(AM_DEFAULT_VERBOSITY))
code_coverage_v_genhtml_0 = @echo " GEN " $(CODE_COVERAGE_OUTPUT_DIRECTORY);
code_coverage_v_lcov_cap = $(code_coverage_v_lcov_cap_$(V))
code_coverage_v_lcov_cap_ = $(code_coverage_v_lcov_cap_$(AM_DEFAULT_VERBOSITY))
code_coverage_v_lcov_cap_0 = @echo " LCOV --capture"\
code_coverage_v_lcov_ign = $(code_coverage_v_lcov_ign_$(V))
code_coverage_v_lcov_ign_ = $(code_coverage_v_lcov_ign_$(AM_DEFAULT_VERBOSITY))
code_coverage_v_lcov_ign_0 = @echo " LCOV --remove /tmp/*"\
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dracutdir=''
dvidir='${docdir}'
exec_prefix='NONE'
host='x86_64-pc-linux-gnu'
host_alias=''
host_cpu='x86_64'
host_os='linux-gnu'
host_vendor='pc'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='${SHELL} /var/lib/dkms/zfs/0.8.3/build/config/install-sh'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p='$(MKDIR_P)'
modulesloaddir=''
mounthelperdir=''
oldincludedir='/usr/include'
pdfdir='${docdir}'
pkgpyexecdir='${pyexecdir}/zfs'
pkgpythondir='${pythondir}/zfs'
prefix='/usr'
program_transform_name='s,x,x,'
psdir='${docdir}'
pyexecdir='${exec_prefix}/lib/python3.7/site-packages'
pythondir='${prefix}/lib/python3.7/site-packages'
pythonsitedir='/usr/lib/python3/dist-packages'
runstatedir='${localstatedir}/run'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
systemdgeneratordir=''
systemdpresetdir=''
systemdunitdir=''
target='x86_64-pc-linux-gnu'
target_alias=''
target_cpu='x86_64'
target_os='linux-gnu'
target_vendor='pc'
udevdir=''
udevruledir=''
zfsexecdir=''
## ----------- ##
## confdefs.h. ##
## ----------- ##
/* confdefs.h */
#define PACKAGE_NAME "zfs"
#define PACKAGE_TARNAME "zfs"
#define PACKAGE_VERSION "0.8.3"
#define PACKAGE_STRING "zfs 0.8.3"
#define PACKAGE_BUGREPORT ""
#define PACKAGE_URL ""
#define ZFS_META_NAME "zfs"
#define ZFS_META_VERSION "0.8.3"
#define SPL_META_VERSION ZFS_META_VERSION
#define ZFS_META_RELEASE "1~bpo10+1"
#define SPL_META_RELEASE ZFS_META_RELEASE
#define ZFS_META_LICENSE "CDDL"
#define ZFS_META_ALIAS "zfs-0.8.3-1~bpo10+1"
#define SPL_META_ALIAS ZFS_META_ALIAS
#define ZFS_META_AUTHOR "OpenZFS on Linux"
#define ZFS_META_KVER_MIN "2.6.32"
#define ZFS_META_KVER_MAX "5.4"
#define PACKAGE "zfs"
#define VERSION "0.8.3"
#define STDC_HEADERS 1
#define HAVE_SYS_TYPES_H 1
#define HAVE_SYS_STAT_H 1
#define HAVE_STDLIB_H 1
#define HAVE_STRING_H 1
#define HAVE_MEMORY_H 1
#define HAVE_STRINGS_H 1
#define HAVE_INTTYPES_H 1
#define HAVE_STDINT_H 1
#define HAVE_UNISTD_H 1
#define HAVE_DLFCN_H 1
#define LT_OBJDIR ".libs/"
#define HAVE_ICONV 1
#define ICONV_CONST
#define HAVE_SSE 1
#define HAVE_SSE2 1
#define HAVE_SSE3 1
#define HAVE_SSSE3 1
#define HAVE_SSE4_1 1
#define HAVE_SSE4_2 1
#define HAVE_AVX 1
#define HAVE_AVX2 1
#define HAVE_AVX512F 1
#define HAVE_AVX512CD 1
#define HAVE_AVX512DQ 1
#define HAVE_AVX512BW 1
#define HAVE_AVX512IFMA 1
#define HAVE_AVX512VBMI 1
#define HAVE_AVX512PF 1
#define HAVE_AVX512ER 1
#define HAVE_AVX512VL 1
#define HAVE_AES 1
#define HAVE_PCLMULQDQ 1
#define HAVE_PYTHON "3.7"
#define HAVE_LARGE_STACKS 1
#define HAVE_KERNEL_FPU_API_HEADER 1
#define HAVE_WAIT_QUEUE_ENTRY_T 1
#define ZFS_DEVICE_MINOR 249
#define ZFS_GLOBAL_NODE_PAGE_STATE 1
#define ZFS_GLOBAL_ZONE_PAGE_STATE 1
configure: exit 1
-------------- next part --------------
# dkms install zfs/0.8.3
Kernel preparation unnecessary for this kernel. Skipping...
Running the pre_build script:
checking for gawk... gawk
checking metadata... META file
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking target system type... x86_64-pc-linux-gnu
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... none
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking dependency style of gcc... none
checking whether to build with code coverage support... no
checking how to create a pax tar archive... gnutar
checking zfs author... OpenZFS on Linux
checking zfs license... CDDL
checking for ld... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking for shared library run path origin... done
checking 32-bit host C ABI... no
checking for the common suffixes of directories in the library search path... lib,lib
checking for iconv... yes
checking for working iconv... yes
checking for iconv declaration... extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
checking whether NLS is requested... yes
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for msgmerge... /usr/bin/msgmerge
checking zfs config... kernel
checking whether gcc supports -Wno-unused-but-set-variable... yes
checking whether gcc supports -Wno-bool-compare... yes
checking whether gcc supports -Wframe-larger-than=<size>... yes
checking whether gcc supports -Wno-format-truncation... yes
checking whether gcc supports -fno-omit-frame-pointer... yes
checking whether to build with -fsanitize=address support... no
checking whether host toolchain supports SSE... yes
checking whether host toolchain supports SSE2... yes
checking whether host toolchain supports SSE3... yes
checking whether host toolchain supports SSSE3... yes
checking whether host toolchain supports SSE4.1... yes
checking whether host toolchain supports SSE4.2... yes
checking whether host toolchain supports AVX... yes
checking whether host toolchain supports AVX2... yes
checking whether host toolchain supports AVX512F... yes
checking whether host toolchain supports AVX512CD... yes
checking whether host toolchain supports AVX512DQ... yes
checking whether host toolchain supports AVX512BW... yes
checking whether host toolchain supports AVX512IFMA... yes
checking whether host toolchain supports AVX512VBMI... yes
checking whether host toolchain supports AVX512PF... yes
checking whether host toolchain supports AVX512ER... yes
checking whether host toolchain supports AVX512VL... yes
checking whether host toolchain supports AES... yes
checking whether host toolchain supports PCLMULQDQ... yes
checking for target asm dir... asm-x86_64
checking for python3... python3
checking for python version... 3.7
checking for python platform... linux
checking for python script directory... ${prefix}/lib/python3.7/site-packages
checking for python extension module directory... ${exec_prefix}/lib/python3.7/site-packages
checking for python3.7... /usr/bin/python3.7
checking for a version of Python >= '2.1.0'... yes
checking for a version of Python >= '3.4.0'... yes
checking for the distutils Python package... yes
checking for Python include path... -I/usr/include/python3.7m
checking for Python library path... -L/usr/lib -lpython3.7m
checking for Python site-packages path... /usr/lib/python3/dist-packages
checking python extra libraries... -lcrypt -lpthread -ldl -lutil -lm
checking python extra linking flags... -Xlinker -export-dynamic -Wl,-O1 -Wl,-Bsymbolic-functions
checking consistency of all components of python development environment... no
checking whether to enable pyzfs: ... no
checking kernel source directory... /lib/modules/5.4.0-0.bpo.4-amd64/build
checking kernel build directory... /lib/modules/5.4.0-0.bpo.4-amd64/build
checking kernel source version... 5.4.0-0.bpo.4-amd64
checking kernel file name for module symbols... Module.symvers
checking whether modules can be built... yes
checking for kernel config option compatibility... done
checking whether kernel was built with 16K or larger stacks... yes
checking whether mutex_lock() is GPL-only... no
checking whether CONFIG_TRIM_UNUSED_KSYM is disabled... yes
checking whether CONFIG_ZLIB_INFLATE is defined... yes
checking whether CONFIG_ZLIB_DEFLATE is defined... yes
checking whether fpu headers are available... asm/fpu/api.h
checking whether wait_queue_entry_t exists... yes
checking whether /dev/zfs minor is available... grep: /lib/modules/5.4.0-0.bpo.4-amd64/build/include/linux/miscdevice.h: No such file or directory
249
checking whether DECLARE_EVENT_CLASS() is available... no
checking for available kernel interfaces... done
checking whether access_ok() has 'type' parameter... no
checking whether global_node_page_state() exists... yes
checking whether global_zone_page_state() exists... yes
checking whether enum node_stat_item contains NR_FILE_PAGES... no
checking whether enum node_stat_item contains NR_INACTIVE_ANON... no
checking whether enum node_stat_item contains NR_INACTIVE_FILE... no
checking whether enum node_stat_item contains NR_SLAB_RECLAIMABLE... no
checking whether enum zone_stat_item contains NR_FILE_PAGES... no
checking whether enum zone_stat_item contains NR_INACTIVE_ANON... no
checking whether enum zone_stat_item contains NR_INACTIVE_FILE... no
checking whether enum zone_stat_item contains NR_SLAB_RECLAIMABLE... no
checking whether global_page_state enums are sane... no
NR_FILE_PAGES in either node_stat_item or zone_stat_item: NOT FOUND
configure: error:
*** None of the expected "global page state" interfaces were detected.
*** This may be because your kernel version is newer than what is
*** supported, or you are using a patched custom kernel with
*** incompatible modifications.
***
*** ZFS Version: zfs-0.8.3-1~bpo10+1
*** Compatible Kernels: 2.6.32 - 5.4
Building module:
cleaning build area...(bad exit status: 2)
make -j12 KERNELRELEASE=5.4.0-0.bpo.4-amd64...(bad exit status: 2)
Error! Bad return status for module build on kernel: 5.4.0-0.bpo.4-amd64 (x86_64)
Consult /var/lib/dkms/zfs/0.8.3/build/make.log for more information.
More information about the Pkg-zfsonlinux-devel
mailing list