[Python-modules-commits] r13586 - in packages/python-ipaddr/trunk/debian (8 files)
kitterman at users.alioth.debian.org
kitterman at users.alioth.debian.org
Thu Jun 24 04:15:32 UTC 2010
Date: Thursday, June 24, 2010 @ 04:15:10
Author: kitterman
Revision: 13586
* Add new RELEASENOTES file in releasenots.patch. (upstream re-released 2.1.3
with this added in a revised tarball using the same version number)
- Add debian/docs to install it
- Add build-dep on quilt (>= 0.46-7)
- Change debian/rules to build --with quilt
- Add README.source
* Convert from python-support to dh_python2
- Drop build-depends on python-support
- Bump python-all version requirement to 2.6.5-2 and move to build-depends
from build-depends-indep
- Bump debhelper version requirement
- Change debian/rules to build --with python2
* Add XB-Python-Version
Added:
packages/python-ipaddr/trunk/debian/README.source
packages/python-ipaddr/trunk/debian/docs
packages/python-ipaddr/trunk/debian/patches/
packages/python-ipaddr/trunk/debian/patches/releasenotes.patch
packages/python-ipaddr/trunk/debian/patches/series
Modified:
packages/python-ipaddr/trunk/debian/changelog
packages/python-ipaddr/trunk/debian/control
packages/python-ipaddr/trunk/debian/rules
Added: packages/python-ipaddr/trunk/debian/README.source
===================================================================
--- packages/python-ipaddr/trunk/debian/README.source (rev 0)
+++ packages/python-ipaddr/trunk/debian/README.source 2010-06-24 04:15:10 UTC (rev 13586)
@@ -0,0 +1,5 @@
+This package uses quilt for patches. dpkg-source -x does produce source
+ready for building with dpkg-buildpackage. It does not procude source ready
+for editing. See /usr/share/doc/quilt/README.source for information on using
+quilt.
+
Modified: packages/python-ipaddr/trunk/debian/changelog
===================================================================
--- packages/python-ipaddr/trunk/debian/changelog 2010-06-23 23:37:23 UTC (rev 13585)
+++ packages/python-ipaddr/trunk/debian/changelog 2010-06-24 04:15:10 UTC (rev 13586)
@@ -1,3 +1,21 @@
+python-ipaddr (2.1.3-2) unstable; urgency=low
+
+ * Add new RELEASENOTES file in releasenots.patch. (upstream re-released 2.1.3
+ with this added in a revised tarball using the same version number)
+ - Add debian/docs to install it
+ - Add build-dep on quilt (>= 0.46-7)
+ - Change debian/rules to build --with quilt
+ - Add README.source
+ * Convert from python-support to dh_python2
+ - Drop build-depends on python-support
+ - Bump python-all version requirement to 2.6.5-2 and move to build-depends
+ from build-depends-indep
+ - Bump debhelper version requirement
+ - Change debian/rules to build --with python2
+ * Add XB-Python-Version
+
+ -- Scott Kitterman <scott at kitterman.com> Wed, 23 Jun 2010 23:08:30 -0400
+
python-ipaddr (2.1.3-1) unstable; urgency=low
* New upstream release
Modified: packages/python-ipaddr/trunk/debian/control
===================================================================
--- packages/python-ipaddr/trunk/debian/control 2010-06-23 23:37:23 UTC (rev 13585)
+++ packages/python-ipaddr/trunk/debian/control 2010-06-24 04:15:10 UTC (rev 13586)
@@ -3,8 +3,7 @@
Priority: optional
Maintainer: Scott Kitterman <scott at kitterman.com>
Uploaders: Debian Python Modules Team <python-modules-team at lists.alioth.debian.org>
-Build-Depends: debhelper (>= 7.2.11)
-Build-Depends-Indep: python-all (>= 2.5.4-2~), python-support (>= 0.6.4)
+Build-Depends: debhelper (>= 7.3.16), python-all (>= 2.6.5-2~), , quilt (>= 0.46-7)
Standards-Version: 3.8.4
Homepage: http://code.google.com/p/ipaddr-py/
XS-Python-Version: >= 2.4
@@ -14,6 +13,7 @@
Package: python-ipaddr
Architecture: all
Depends: ${python:Depends}, ${misc:Depends}
+XB-Python-Version: ${python:Versions}
Description: Python module for working with IP addresses, both IPv4 and IPv6
This library is used to create/poke/manipulate IPv4 and IPv6 addresses
and networks in Python. It is intended to be fast and lightweight.
Added: packages/python-ipaddr/trunk/debian/docs
===================================================================
--- packages/python-ipaddr/trunk/debian/docs (rev 0)
+++ packages/python-ipaddr/trunk/debian/docs 2010-06-24 04:15:10 UTC (rev 13586)
@@ -0,0 +1,2 @@
+RELEASENOTES
+
Added: packages/python-ipaddr/trunk/debian/patches/releasenotes.patch
===================================================================
--- packages/python-ipaddr/trunk/debian/patches/releasenotes.patch (rev 0)
+++ packages/python-ipaddr/trunk/debian/patches/releasenotes.patch 2010-06-24 04:15:10 UTC (rev 13586)
@@ -0,0 +1,238 @@
+Index: python-ipaddr-2.1.3/RELEASENOTES
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ python-ipaddr-2.1.3/RELEASENOTES 2010-06-14 14:32:18.000000000 -0400
+@@ -0,0 +1,233 @@
++#summary notes from releases
++
++= Release Notes =
++
++Here are the visible changes for each release.
++
++== 2.1.3 ==
++
++(6/12/2010)
++
++ipaddr-2.1.3 release notes.
++
++ * fix for issue61, incorrect network containment (thanks bw.default)
++
++== 2.1.2 ==
++
++(5/31/2010)
++
++ipaddr-2.1.2 release notes.
++
++ * Happy Memorial day.
++ * arithmetic for v4 and v6 address objects and ints (issue 57).
++ * fix address_exclude issue where excluding an address from itself puked.
++ * make sure addresses and networks don't compare.
++ * doc-string fixes (issue60)
++ * and masked() method to _BaseNet to return a network object with the host bits masked out (issue58)
++ * fix v6 subnet representation (email to ipaddr-py-dev)
++
++
++== 2.1.1 ==
++
++(3/2/2010)
++
++ipaddr-2.1.1 release notes.
++
++ * bug with list comprehension in {{{ IPv4Network._is_valid_netmask() }}}
++ * kill the last remaining instances of the old exceptions in the docstrings(thanks Scott Kitterman)
++
++== 2.1.0 ==
++
++(2/13/2010)
++
++ipaddr-2.1.0 release notes.
++
++Easier change this time :)
++
++ * networks and addresses are unsortable by default (see https://groups.google.com/group/ipaddr-py-dev/browse_thread/thread/8fbc5166be71adbc for discussion).
++ * exception text cleanup.
++ * fixing inconsistent behavior of v4/v6 address/network comparisons.
++ * add IPv4Network().is_unspecified (thanks rep.dot.net)
++ * fix for decoding mapped addresses (thanks rlaager)
++ * docstring updates (thanks Scott Kitterman)
++ * fix errant ref to non-existent variable(s) (thanks Harry Bock)
++ * fix exceptions (most exceptions are subclassed from ValueError now, so this can easily be caught)
++ * iterator for looping through subnets (thanks Marco Giutsi)
++
++That's mostly it. there were quite a few other minor changes, but this should cover the major bits. Usage.wiki will be updated in the coming days.
++
++== 2.0.0 ==
++
++ipaddr-2.0 release notes.
++
++First and foremost, this is a backwards incompatible change. Code written for ipaddr-1.x will likely not work stock with ipaddr-2.0. For users of the 1.x branch, I'll continue to provide support, but new-feature development has ceased. But it's not so bad, take a look.All in all, I think this new version of ipaddr is much more intuitive and easy to use.
++
++The best way to get a feel for this code is to download it and try and out, but I've tried to list some of the more important changes below to help you out.
++
++The major changes.
++
++ # IPvXAddress and IPvXNetwork classes.
++
++ * Individual addresses are now (IPv4|IPv6)Address objects. Network attributes that are actually addresses (eg, broadcast, network, hostmask) are now (IPv4|IPv6)Address objects. That means no more IPv4/IPv6 classes handling only networks.
++{{{
++In [3]: ipaddr.IPv4Network("1.1.1.0/24")
++Out[3]: IPv4Network('1.1.1.0/24')
++
++In [4]: ipaddr.IPv4Network("1.1.1.0/24").network
++Out[4]: IPv4Address('1.1.1.0')
++
++In [5]: ipaddr.IPv4Network("1.1.1.0/24").broadcast
++Out[5]: IPv4Address('1.1.1.255')
++}}}
++
++ * no more ext methods. To reference the stringified version of any attribute, you call str() on (similar for the numeric value with int()).
++{{{
++In [6]: str(ipaddr.IPv4Network("1.1.1.0/24").broadcast)
++Out[6]: '1.1.1.255'
++
++In [7]: int(ipaddr.IPv4Network("1.1.1.0/24").broadcast)
++Out[7]: 16843263
++
++In [8]: int(ipaddr.IPv4Network("1.1.1.0/24").network)
++Out[8]: 16843008
++
++In [9]: str(ipaddr.IPv4Network("1.1.1.0/24").network)
++Out[9]: '1.1.1.0'
++}}}
++
++ * IP() everything-constructor has been replaced by IPAddress() and IPNetwork() constructors. It seems reasonable to assume that an application programmer will know when they are dealing strictly with ip addresses vs. networks and making this separation de-clutters the code. IPNetwork still assumes a default prefixlength of 32 for IPv4 and 128 for IPv6 if none is supplied (just like IP() used to), so when in doubt, you can always use IPNetwork.
++{{{
++In [16]: ipaddr.IPNetwork('1.1.1.1')
++Out[16]: IPv4Network('1.1.1.1/32')
++
++In [17]: ipaddr.IPNetwork('1.1.1.1/12')
++Out[17]: IPv4Network('1.1.1.1/12')
++
++In [18]: ipaddr.IPNetwork('::1')
++Out[18]: IPv6Network('::1/128')
++
++In [19]: ipaddr.IPNetwork('::1/64')
++Out[19]: IPv6Network('::1/64')
++}}}
++
++ # Some other (but no less important) bug fixes/improvements:
++
++ * __ contains __ accepts strings/ints as well as (IPv4|IPv6)Address objects.
++{{{
++In [9]: ipaddr.IPAddress('1.1.1.1') in ipaddr.IPNetwork('1.1.1.0/24')
++Out[9]: True
++
++In [10]: '1.1.1.1' in ipaddr.IPv4Network("1.1.1.0/24")
++Out[10]: True
++
++In [11]: '1' in ipaddr.IPv4Network("0.0.0.0/0")
++Out[11]: True
++
++In [12]: 1 in ipaddr.IPv4Network("0.0.0.0/0")
++Out[12]: True
++}}}
++ * summarize_address_range. You can now get a list of all of the networks between two distinct (IPv4|IPv6)Address'es (results in potentially huge speed boosts for address collapsing)
++{{{
++In [14]: ipaddr.summarize_address_range(ipaddr.IPAddress('1.1.0.0'), ipaddr.IPAddress('1.1.255.255'))
++Out[14]: [IPv4Network('1.1.0.0/16')]
++
++In [15]: ipaddr.summarize_address_range(ipaddr.IPAddress('1.1.0.0'), ipaddr.IPAddress('1.1.255.254'))
++Out[15]:
++[IPv4Network('1.1.0.0/17'),
++ IPv4Network('1.1.128.0/18'),
++ IPv4Network('1.1.192.0/19'),
++ IPv4Network('1.1.224.0/20'),
++ IPv4Network('1.1.240.0/21'),
++ IPv4Network('1.1.248.0/22'),
++ IPv4Network('1.1.252.0/23'),
++ IPv4Network('1.1.254.0/24'),
++ IPv4Network('1.1.255.0/25'),
++ IPv4Network('1.1.255.128/26'),
++ IPv4Network('1.1.255.192/27'),
++ IPv4Network('1.1.255.224/28'),
++ IPv4Network('1.1.255.240/29'),
++ IPv4Network('1.1.255.248/30'),
++ IPv4Network('1.1.255.252/31'),
++ IPv4Network('1.1.255.254/32')]
++}}}
++
++ * network iterators. the (IPv4|IPv6)Network classes now implement iterators to help quickly access each member of a network in sequence:
++{{{
++
++In [24]: for addr in iter(ipaddr.IPNetwork('1.1.1.1/28')): addr
++ ....:
++Out[24]: IPv4Address('1.1.1.0')
++Out[24]: IPv4Address('1.1.1.1')
++Out[24]: IPv4Address('1.1.1.2')
++Out[24]: IPv4Address('1.1.1.3')
++Out[24]: IPv4Address('1.1.1.4')
++Out[24]: IPv4Address('1.1.1.5')
++Out[24]: IPv4Address('1.1.1.6')
++Out[24]: IPv4Address('1.1.1.7')
++Out[24]: IPv4Address('1.1.1.8')
++Out[24]: IPv4Address('1.1.1.9')
++Out[24]: IPv4Address('1.1.1.10')
++Out[24]: IPv4Address('1.1.1.11')
++Out[24]: IPv4Address('1.1.1.12')
++Out[24]: IPv4Address('1.1.1.13')
++Out[24]: IPv4Address('1.1.1.14')
++Out[24]: IPv4Address('1.1.1.15')
++}}}
++
++ * additionally, an iterhosts() method has been added to allow for iterating over all of the usable addresses on a network (everything except the network and broadcast addresses)
++{{{
++In [26]: for addr in ipaddr.IPNetwork('1.1.1.1/28').iterhosts(): addr
++ ....:
++Out[26]: IPv4Address('1.1.1.1')
++Out[26]: IPv4Address('1.1.1.2')
++Out[26]: IPv4Address('1.1.1.3')
++Out[26]: IPv4Address('1.1.1.4')
++Out[26]: IPv4Address('1.1.1.5')
++Out[26]: IPv4Address('1.1.1.6')
++Out[26]: IPv4Address('1.1.1.7')
++Out[26]: IPv4Address('1.1.1.8')
++Out[26]: IPv4Address('1.1.1.9')
++Out[26]: IPv4Address('1.1.1.10')
++Out[26]: IPv4Address('1.1.1.11')
++Out[26]: IPv4Address('1.1.1.12')
++Out[26]: IPv4Address('1.1.1.13')
++Out[26]: IPv4Address('1.1.1.14')
++}}}
++
++Thanks to the python community and everyone who's made feature suggestions or submitted patches. Please continue to send bugs/enhancements/patches to the mailing list.
++
++== 1.1.1 ==
++
++This release contains a single important bugfix. All users of 1.1.0 should upgrade.
++
++ * r77 A logical error caused ordering operators to behave incorrectly.
++
++== 1.1.0 ==
++
++`ipaddr.py` is now part of the standard library in Python 2.7 and 3.1! This release is compatible with the `ipaddr` from future versions of Python.
++
++Special thanks to Philipp Hagemeister for making most of the improvements to this release, and to Gregory P. Smith for shepherding this into the Python standard library.
++
++ * r59 Method names are now PEP-8 compliant, instead of Google-style camel case. The old method names remain, but are deprecated; you should use the lowercase names to be compatible with Python 2.7/3.1. (pmoody)
++ * r63 .prefixlen is now a property. (pmoody)
++ * r64 Stronger validation. (Philipp Hagemeister)
++ * r65 1.2.3.4 is not a valid v6 address, so we can simplify the constructor. (Philipp Hagemeister)
++ * r66 Expand rich comparison operations and their tests, with a goal of supporting 2to3. Add a new method .networks_key(). Add a new script to run through 2to3 and make sure tests pass under Python 3 with the converted version. (Philipp Hagemeister)
++ * r68 New method .packed(). (Philipp Hagemeister)
++ * r69 Add `is_multicast`, `is_unspecified`, `is_loopback`, `is_link_local`, `is_site_local`, and `is_private` for IPv6. Make more methods into properties. Improved documentation and tests for `is_*` properties for IPv4 and IPv6. Rename `networks_key()` to `_get_networks_key()`.
++ * r71 Fix off-by-one bug (issue 15). (gpsmith)
++
++== 1.0.2 ==
++ * r52 Force the return value in testHexRepresentation to uppercase to workaround Python version. (smart)
++ * r51 Fix testHexRepresentation(). Hex representations of longs are uppercase. (smart)
++ * r50 Remove trailing whitespace and update docstrings. (smart)
++ * r44. this makes the spacing and docstrings pep8 compliant. (pmoody)
++ * r43. When processing the IPv4 mapped address 16 bits at a time, the components are stored in the reverse order. Updated the test to use a non-symmetric IPv4 address, which exhibited the bug. (smart)
++ * r40. implment __int__ and __hex__. will need to be updated for py3k (to use __index__) (pmoody)
++ * r38 A cleanup from issue 9 : Make exception messages consistent for IP(''), IPv4(''), IPv6('') (smart)
++ * r37 Fix for issue 9 : ipaddr.IP('') should raise ValueError (mshields)
++
++== 1.0.1 ==
++
++ * str() now produces lowercase for IPv6 addresses, to match inet_pton(3). (http://codereview.appspot.com/7678)
++ * repr() now produces strings that can be pasted back into the interpreter.
Added: packages/python-ipaddr/trunk/debian/patches/series
===================================================================
--- packages/python-ipaddr/trunk/debian/patches/series (rev 0)
+++ packages/python-ipaddr/trunk/debian/patches/series 2010-06-24 04:15:10 UTC (rev 13586)
@@ -0,0 +1 @@
+releasenotes.patch
Modified: packages/python-ipaddr/trunk/debian/rules
===================================================================
--- packages/python-ipaddr/trunk/debian/rules 2010-06-23 23:37:23 UTC (rev 13585)
+++ packages/python-ipaddr/trunk/debian/rules 2010-06-24 04:15:10 UTC (rev 13586)
@@ -1,5 +1,5 @@
#!/usr/bin/make -f
%:
- dh $@
+ dh $@ --with python2, --with quilt
More information about the Python-modules-commits
mailing list