[Qa-jenkins-scm] Build failed in Jenkins: reproducible_builder_armhf_1 #58
jenkins at jenkins.debian.net
jenkins at jenkins.debian.net
Sun Aug 30 20:22:40 UTC 2015
See <https://jenkins.debian.net/job/reproducible_builder_armhf_1/58/>
------------------------------------------
[...truncated 115 lines...]
Architecture: armhf
Maintainer: Debian Pbuilder Team <pbuilder-maint at lists.alioth.debian.org>
Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder
This package was created automatically by pbuilder to satisfy the
build-dependencies of the package being currently built.
Depends: cdbs, debhelper (>> 5)
dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'.
Selecting previously unselected package pbuilder-satisfydepends-dummy.
(Reading database ... 19943 files and directories currently installed.)
Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ...
Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ...
dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested:
pbuilder-satisfydepends-dummy depends on cdbs; however:
Package cdbs is not installed.
Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ...
Reading package lists...
Building dependency tree...
Reading state information...
Initializing package states...
Writing extended state information...
Building tag database...
The following NEW packages will be installed:
cdbs{a}
0 packages upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 76.9 kB of archives. After unpacking 232 kB will be used.
Writing extended state information...
Get: 1 http://reproducible.alioth.debian.org/debian/ ./ cdbs 0.4.130.0~reproducible3 [76.9 kB]
Fetched 76.9 kB in 0s (2967 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package cdbs.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 19943 files and directories currently installed.)
Preparing to unpack .../cdbs_0.4.130.0~reproducible3_all.deb ...
Unpacking cdbs (0.4.130.0~reproducible3) ...
Processing triggers for man-db (2.7.2-1) ...
Setting up cdbs (0.4.130.0~reproducible3) ...
Reading package lists...
Building dependency tree...
Reading state information...
Reading extended state information...
Initializing package states...
Writing extended state information...
Building tag database...
-> Finished parsing the build-deps
Reading package lists...
Building dependency tree...
Reading state information...
The following extra packages will be installed:
libfakeroot
The following NEW packages will be installed:
fakeroot libfakeroot
0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 124 kB of archives.
After this operation, 373 kB of additional disk space will be used.
Get:1 http://ftp.us.debian.org/debian/ unstable/main libfakeroot armhf 1.20.2-1 [40.5 kB]
Get:2 http://ftp.us.debian.org/debian/ unstable/main fakeroot armhf 1.20.2-1 [83.5 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 124 kB in 0s (3080 kB/s)
Selecting previously unselected package libfakeroot:armhf.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 19998 files and directories currently installed.)
Preparing to unpack .../libfakeroot_1.20.2-1_armhf.deb ...
Unpacking libfakeroot:armhf (1.20.2-1) ...
Selecting previously unselected package fakeroot.
Preparing to unpack .../fakeroot_1.20.2-1_armhf.deb ...
Unpacking fakeroot (1.20.2-1) ...
Processing triggers for man-db (2.7.2-1) ...
Setting up libfakeroot:armhf (1.20.2-1) ...
Setting up fakeroot (1.20.2-1) ...
update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode
I: Copying source file
I: copying [cksfv_1.3.14-2.dsc]
I: copying [./cksfv_1.3.14.orig.tar.gz]
I: copying [./cksfv_1.3.14-2.debian.tar.gz]
I: Extracting source
gpgv: keyblock resource `/tmp/buildd/.gnupg/trustedkeys.gpg': file open error
gpgv: Signature made Wed Aug 3 22:00:27 2011 GMT+12 using RSA key ID BAB043D5
gpgv: Can't check signature: public key not found
dpkg-source: warning: failed to verify signature on ./cksfv_1.3.14-2.dsc
dpkg-source: info: extracting cksfv in cksfv-1.3.14
dpkg-source: info: unpacking cksfv_1.3.14.orig.tar.gz
dpkg-source: info: unpacking cksfv_1.3.14-2.debian.tar.gz
dpkg-source: info: applying 612741.patch
I: Building the package
I: Running cd tmp/buildd/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" dpkg-buildpackage -us -uc -b -rfakeroot
dpkg-buildpackage: source package cksfv
dpkg-buildpackage: source version 1.3.14-2
dpkg-buildpackage: source distribution unstable
dpkg-buildpackage: source changed by Sebastien NOEL <sebastien at twolife.org>
dpkg-source --before-build cksfv-1.3.14
dpkg-buildpackage: host architecture armhf
dpkg-source: warning: unknown information field 'Dm-Upload-Allowed' in input data in general section of control info file
fakeroot debian/rules clean
test -x debian/rules
dh_clean
[ ! -f Makefile ] || /usr/bin/make clean
dh_clean Makefile src/Makefile src/config.h
debian/rules build
test -x debian/rules
mkdir -p "."
./configure --prefix=/tmp/buildd/cksfv-1.3.14/debian/cksfv/usr
prefix directory: /tmp/buildd/cksfv-1.3.14/debian/cksfv/usr
package prefix:
binary directory: /tmp/buildd/cksfv-1.3.14/debian/cksfv/usr/bin
man directory: /tmp/buildd/cksfv-1.3.14/debian/cksfv/usr/share/man
compiler: gcc
has stdint.h: yes
has inttypes.h: no
nautilus support: no
configure succesful.
/usr/bin/make
make[1]: Entering directory '/tmp/buildd/cksfv-1.3.14'
cd src && /usr/bin/make
make[2]: Entering directory '/tmp/buildd/cksfv-1.3.14/src'
gcc -Wall -D_FILE_OFFSET_BITS=64 -D_LARGEFILE64_SOURCE -I. -O2 -o cksfv cksfv.c print.c crc32.c readsfv.c newsfv.c
make[2]: Leaving directory '/tmp/buildd/cksfv-1.3.14/src'
make[1]: Leaving directory '/tmp/buildd/cksfv-1.3.14'
fakeroot debian/rules binary
test -x debian/rules
dh_testroot
dh_clean -k
dh_clean: dh_clean -k is deprecated; use dh_prep instead
dh_installdirs -A
mkdir -p "."
/usr/bin/make install
make[1]: Entering directory '/tmp/buildd/cksfv-1.3.14'
cd src && /usr/bin/make
make[2]: Entering directory '/tmp/buildd/cksfv-1.3.14/src'
make[2]: 'cksfv' is up to date.
make[2]: Leaving directory '/tmp/buildd/cksfv-1.3.14/src'
mkdir -p "/tmp/buildd/cksfv-1.3.14/debian/cksfv/usr/bin" "/tmp/buildd/cksfv-1.3.14/debian/cksfv/usr/share/man/man1/"
install src/cksfv "/tmp/buildd/cksfv-1.3.14/debian/cksfv/usr/bin"
install -m 644 cksfv.1 "/tmp/buildd/cksfv-1.3.14/debian/cksfv/usr/share/man/man1/"
make[1]: Leaving directory '/tmp/buildd/cksfv-1.3.14'
Adding cdbs dependencies to debian/cksfv.substvars
dh_installdirs -pcksfv
dh_installdocs -pcksfv ./README ./TODO ./AUTHORS
dh_installexamples -pcksfv
dh_installman -pcksfv
dh_installinfo -pcksfv
dh_installmenu -pcksfv
dh_installcron -pcksfv
dh_installinit -pcksfv
dh_installdebconf -pcksfv
dh_installemacsen -pcksfv
dh_installcatalogs -pcksfv
dh_installpam -pcksfv
dh_installlogrotate -pcksfv
dh_installlogcheck -pcksfv
dh_installchangelogs -pcksfv ./ChangeLog
dh_installudev -pcksfv
dh_lintian -pcksfv
dh_bugfiles -pcksfv
dh_install -pcksfv
dh_link -pcksfv
dh_installmime -pcksfv
dh_installgsettings -pcksfv
dh_strip -pcksfv
dh_strip_nondeterminism
dh_compress -pcksfv
dh_fixperms -pcksfv
dh_makeshlibs -pcksfv
dh_installdeb -pcksfv
dh_perl -pcksfv
dh_shlibdeps -pcksfv
dh_gencontrol -pcksfv
dpkg-gencontrol: warning: unknown information field 'Dm-Upload-Allowed' in input data in general section of control info file
dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
dpkg-gencontrol: warning: unknown information field 'Dm-Upload-Allowed' in input data in general section of control info file
dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
dh_md5sums -pcksfv
dh_builddeb -pcksfv
dpkg-deb: building package 'cksfv-dbgsym' in '../cksfv-dbgsym_1.3.14-2_armhf.deb'.
dpkg-deb: building package 'cksfv' in '../cksfv_1.3.14-2_armhf.deb'.
dpkg-genbuildinfo >../cksfv_1.3.14-2_armhf.buildinfo
dpkg-distaddfile cksfv_1.3.14-2_armhf.buildinfo utils optional
dpkg-distaddfile: warning: File::FcntlLock not available; using flock which is not NFS-safe
dpkg-genchanges -b >../cksfv_1.3.14-2_armhf.changes
dpkg-genchanges: warning: unknown information field 'Dm-Upload-Allowed' in input data in general section of control info file
dpkg-genchanges: warning: package cksfv-dbgsym listed in files list but not in control info
dpkg-genchanges: binary-only upload (no source code included)
dpkg-source --after-build cksfv-1.3.14
dpkg-source: warning: unknown information field 'Dm-Upload-Allowed' in input data in general section of control info file
dpkg-buildpackage: binary-only upload (no source included)
I: unmounting /sys filesystem
I: unmounting /dev/shm filesystem
I: unmounting dev/pts filesystem
I: unmounting run/shm filesystem
I: unmounting proc filesystem
I: cleaning the build env
I: removing directory /var/cache/pbuilder/build//6454 and its subdirectories
I: Current time: Sun Aug 30 08:22:36 GMT+12 2015
I: pbuilder-time-stamp: 1440966156
+ false
+ set +x
/srv/reproducible-results/tmp.SsVNYMeDYb/tmp.oah6PJIsnJ: 72.8% -- replaced with /srv/reproducible-results/tmp.SsVNYMeDYb/tmp.oah6PJIsnJ.gz
Sun Aug 30 20:22:36 UTC 2015 - /srv/jenkins/bin/reproducible_build.sh stopped running as /tmp/jenkins-script-AwvX6mJ4, which will now be removed.
jenkins_node_wrapper.sh[8018] remote_host called with rsync --server --sender -re.iLsfx . /srv/reproducible-results/tmp.rEdp84x3i0/b1
/srv/jenkins/bin/jenkins_node_wrapper.sh: line 72: syntax error in conditional expression
rsync: connection unexpectedly closed (0 bytes received so far) [Receiver]
rsync error: error in rsync protocol data stream (code 12) at io.c(226) [Receiver=3.1.1]
/srv/reproducible-results/tmp.rEdp84x3i0/tmp.Ld93U4QrbY: 39.9% -- replaced with /srv/reproducible-results/tmp.rEdp84x3i0/tmp.Ld93U4QrbY.gz
INFO: Starting at 2015-08-30 20:22:39.963981
INFO: Finished at 2015-08-30 20:22:39.969866, took: 0:00:00.005892
Sun 30 Aug 20:22:40 UTC 2015 - /srv/jenkins/bin/reproducible_build.sh stopped running as /tmp/jenkins-script-o5C58zgX, which will now be removed.
Build step 'Execute shell' marked build as failure
More information about the Qa-jenkins-scm
mailing list