[Qa-jenkins-scm] Build failed in Jenkins: reproducible_builder_gamma #64253

jenkins at jenkins.debian.net jenkins at jenkins.debian.net
Sun Aug 30 20:42:31 UTC 2015 

See <https://jenkins.debian.net/job/reproducible_builder_gamma/64253/>

------------------------------------------
[...truncated 7431 lines...]
warning: Option "MaxStep" not set, new value 1.6e-01 is used
warning: Option "Mass" only supports constant mass matrices M() and not M(t,y)
warning: Option "MaxOrder" not set, new value 3 is used
warning: Option "RelTol" not set, new value 1.0e-06 is used
warning: Option "AbsTol" not set, new value 1.0e-06 is used
warning: Option "InitialStep" not set, new value 1.0e-06 is used
warning: Option "MaxStep" not set, new value 1.6e-01 is used
warning: Option "Mass" only supports constant mass matrices M() and not M(t,y)
warning: Option "MStateDependence" will be ignored by this solver
warning: Option "MaxOrder" not set, new value 3 is used
warning: Option "RelTol" not set, new value 1.0e-06 is used
warning: Option "AbsTol" not set, new value 1.0e-06 is used
warning: Option "InitialStep" not set, new value 1.0e-06 is used
warning: Option "MaxStep" not set, new value 1.6e-01 is used
warning: Option "MaxOrder" not set, new value 3 is used
warning: Option "BDF" set "off", new value "on" is used
warning: Option "RelTol" not set, new value 1.0e-06 is used
warning: Option "AbsTol" not set, new value 1.0e-06 is used
warning: Option "InitialStep" not set, new value 1.0e-06 is used
warning: Option "MaxStep" not set, new value 1.6e-01 is used
warning: Option "MaxOrder" not set, new value 3 is used
warning: Option "NewtonTol" will be ignored by this solver
warning: Option "RelTol" not set, new value 1.0e-06 is used
warning: Option "AbsTol" not set, new value 1.0e-06 is used
warning: Option "InitialStep" not set, new value 1.0e-06 is used
warning: Option "MaxStep" not set, new value 1.6e-01 is used
warning: Option "MaxOrder" not set, new value 3 is used
warning: Option "MaxNewtonIterations" will be ignored by this solver
PASSES 31 out of 31 tests
[odepkg_octsolver_ddaskr]
warning: Option "RelTol" not set, new value 1e-6 is used
warning: Option "AbsTol" not set, new value 1e-6 is used
warning: Option "InitialStep" not set, new value 1e-6 is used
warning: Option "MaxStep" not set, new value 1.6e-01 is used
warning: Option "MaxOrder" not set, new value 3 is used
warning: Option "RelTol" not set, new value 1e-6 is used
warning: Option "AbsTol" not set, new value 1e-6 is used
warning: Option "InitialStep" not set, new value 1e-6 is used
warning: Option "MaxStep" not set, new value 1.6e-01 is used
warning: Option "MaxOrder" not set, new value 3 is used
warning: Option "RelTol" not set, new value 1e-6 is used
warning: Option "AbsTol" not set, new value 1e-6 is used
warning: Option "InitialStep" not set, new value 1e-6 is used
warning: Option "MaxStep" not set, new value 1.6e-01 is used
warning: Option "MaxOrder" not set, new value 3 is used
warning: Option "RelTol" not set, new value 1e-6 is used
warning: Option "AbsTol" not set, new value 1e-6 is used
warning: Option "InitialStep" not set, new value 1e-6 is used
warning: Option "MaxStep" not set, new value 1.6e-01 is used
warning: Option "MaxOrder" not set, new value 3 is used
warning: Option "RelTol" not set, new value 1e-6 is used
warning: Option "AbsTol" not set, new value 1e-6 is used
warning: Option "InitialStep" not set, new value 1e-6 is used
warning: Option "MaxStep" not set, new value 1.6e-01 is used
warning: Option "MaxOrder" not set, new value 3 is used
warning: Option "RelTol" not set, new value 1e-6 is used
warning: Option "AbsTol" not set, new value 1e-6 is used
warning: Option "InitialStep" not set, new value 1e-6 is used
warning: Option "MaxStep" not set, new value 1.6e-01 is used
warning: Option "MaxOrder" not set, new value 3 is used
warning: Option "RelTol" not set, new value 1e-6 is used
warning: Option "InitialStep" not set, new value 1e-6 is used
warning: Option "MaxStep" not set, new value 1.6e-01 is used
warning: Option "MaxOrder" not set, new value 3 is used
warning: Option "InitialStep" not set, new value 1e-6 is used
warning: Option "MaxStep" not set, new value 1.6e-01 is used
warning: Option "MaxOrder" not set, new value 3 is used
warning: Option "AbsTol" not set, new value 1e-6 is used
warning: Option "NormControl" will be ignored by this solver
warning: Option "InitialStep" not set, new value 1e-6 is used
warning: Option "MaxStep" not set, new value 1.6e-01 is used
warning: Option "MaxOrder" not set, new value 3 is used
warning: Option "RelTol" not set, new value 1e-6 is used
warning: Option "AbsTol" not set, new value 1e-6 is used
warning: Option "NonNegative" will be ignored by this solver
warning: Option "InitialStep" not set, new value 1e-6 is used
warning: Option "MaxStep" not set, new value 1.6e-01 is used
warning: Option "MaxOrder" not set, new value 3 is used
warning: Option "RelTol" not set, new value 1e-6 is used
warning: Option "AbsTol" not set, new value 1e-6 is used
warning: Option "Refine" will be ignored by this solver
warning: Option "InitialStep" not set, new value 1e-6 is used
warning: Option "MaxStep" not set, new value 1.6e-01 is used
warning: Option "MaxOrder" not set, new value 3 is used
warning: Option "RelTol" not set, new value 1e-6 is used
warning: Option "AbsTol" not set, new value 1e-6 is used
warning: Option "InitialStep" not set, new value 1e-6 is used
warning: Option "MaxStep" not set, new value 1.6e-01 is used
warning: Option "MaxOrder" not set, new value 3 is used
warning: Option "RelTol" not set, new value 1e-6 is used
warning: Option "AbsTol" not set, new value 1e-6 is used
warning: Option "MaxStep" not set, new value 1.6e-01 is used
warning: Option "MaxOrder" not set, new value 3 is used
warning: Option "RelTol" not set, new value 1e-6 is used
warning: Option "AbsTol" not set, new value 1e-6 is used
warning: Option "InitialStep" not set, new value 1e-6 is used
warning: Option "MaxOrder" not set, new value 3 is used
warning: Option "RelTol" not set, new value 1e-6 is used
warning: Option "AbsTol" not set, new value 1e-6 is used
warning: Option "InitialStep" not set, new value 1e-6 is used
warning: Option "MaxStep" not set, new value 8.0e-01 is used
warning: Option "MaxOrder" not set, new value 3 is used
warning: Option "RelTol" not set, new value 1e-6 is used
warning: Option "AbsTol" not set, new value 1e-6 is used
warning: Option "InitialStep" not set, new value 1e-6 is used
warning: Option "MaxOrder" not set, new value 3 is used
warning: Option "RelTol" not set, new value 1e-6 is used
warning: Option "AbsTol" not set, new value 1e-6 is used
warning: Option "InitialStep" not set, new value 1e-6 is used
warning: Option "MaxOrder" not set, new value 3 is used
warning: Option "RelTol" not set, new value 1e-6 is used
warning: Option "AbsTol" not set, new value 1e-6 is used
warning: Option "MaxStep" not set, new value 1.6e-01 is used
warning: Option "MaxOrder" not set, new value 3 is used
warning: Option "RelTol" not set, new value 1e-6 is used
warning: Option "AbsTol" not set, new value 1e-6 is used
warning: Option "InitialStep" not set, new value 1e-6 is used
warning: Option "MaxStep" not set, new value 1.6e-01 is used
warning: Option "MaxOrder" not set, new value 3 is used
warning: Option "RelTol" not set, new value 1e-6 is used
warning: Option "AbsTol" not set, new value 1e-6 is used
warning: Option "InitialStep" not set, new value 1e-6 is used
warning: Option "MaxStep" not set, new value 1.6e-01 is used
warning: Option "RelTol" not set, new value 1e-6 is used
warning: Option "AbsTol" not set, new value 1e-6 is used
warning: Option "InitialStep" not set, new value 1e-6 is used
warning: Option "MaxStep" not set, new value 1.6e-01 is used
warning: Option "MaxOrder" not set, new value 3 is used
warning: Option "RelTol" not set, new value 1e-6 is used
warning: Option "AbsTol" not set, new value 1e-6 is used
warning: Option "InitialStep" not set, new value 1e-6 is used
warning: Option "MaxStep" not set, new value 1.6e-01 is used
warning: Option "MaxOrder" not set, new value 3 is used
warning: Option "NewtonTol" will be ignored by this solver
warning: Option "RelTol" not set, new value 1e-6 is used
warning: Option "AbsTol" not set, new value 1e-6 is used
warning: Option "InitialStep" not set, new value 1e-6 is used
warning: Option "MaxStep" not set, new value 1.6e-01 is used
warning: Option "MaxOrder" not set, new value 3 is used
warning: Option "MaxNewtonIterations" will be ignored by this solver
PASSES 28 out of 28 tests
[ -e PKG_ADD.bak ] && mv PKG_ADD.bak PKG_ADD
/usr/share/cdbs/1/class/octave-pkg.mk:134: recipe for target 'check-pkg' failed
make: [check-pkg] Error 1 (ignored)
rmdir --ignore-fail-on-non-empty -p	\
	 /tmp/buildd/octave-odepkg-0.8.5/debian/octave-odepkg/usr/share/octave/packages	\
	 /tmp/buildd/octave-odepkg-0.8.5/debian/octave-odepkg/usr/lib/x86_64-linux-gnu/octave/packages
dh_installdocs -poctave-odepkg ./NEWS 
dh_installexamples -poctave-odepkg 
dh_installman -poctave-odepkg  
dh_installinfo -poctave-odepkg  
dh_installmenu -poctave-odepkg 
dh_installcron -poctave-odepkg 
dh_installinit -poctave-odepkg  
dh_installdebconf -poctave-odepkg 
dh_installemacsen -poctave-odepkg   
dh_installcatalogs -poctave-odepkg 
dh_installpam -poctave-odepkg 
dh_installlogrotate -poctave-odepkg 
dh_installlogcheck -poctave-odepkg 
dh_installchangelogs -poctave-odepkg  
dh_installudev -poctave-odepkg 
dh_lintian -poctave-odepkg 
dh_bugfiles -poctave-odepkg 
dh_install -poctave-odepkg  
dh_link -poctave-odepkg  
dh_installmime -poctave-odepkg 
dh_installgsettings -poctave-odepkg 
dh_strip -poctave-odepkg  
dh_strip_nondeterminism
dh_compress -poctave-odepkg  
dh_fixperms -poctave-odepkg  
dh_makeshlibs -poctave-odepkg  
dh_installdeb -poctave-odepkg 
dh_perl -poctave-odepkg 
dh_shlibdeps -poctave-odepkg    
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/octave-odepkg/usr/lib/x86_64-linux-gnu/octave/packages/odepkg-0.8.5/x86_64-pc-linux-gnu-api-v50+/dldsolver.oct was not linked against libquadmath.so.0 (it uses none of the library's symbols)
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/octave-odepkg/usr/lib/x86_64-linux-gnu/octave/packages/odepkg-0.8.5/x86_64-pc-linux-gnu-api-v50+/dldsolver.oct was not linked against libblas.so.3 (it uses none of the library's symbols)
dh_gencontrol -poctave-odepkg  
dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
dh_md5sums -poctave-odepkg 
dh_builddeb -poctave-odepkg 
dpkg-deb: building package 'octave-odepkg-dbgsym' in '../octave-odepkg-dbgsym_0.8.5-1_amd64.deb'.
dpkg-deb: building package 'octave-odepkg' in '../octave-odepkg_0.8.5-1_amd64.deb'.
 dpkg-genbuildinfo  >../octave-odepkg_0.8.5-1_amd64.buildinfo
 dpkg-distaddfile octave-odepkg_0.8.5-1_amd64.buildinfo math optional
dpkg-distaddfile: warning: File::FcntlLock not available; using flock which is not NFS-safe
 dpkg-genchanges -b >../octave-odepkg_0.8.5-1_amd64.changes
dpkg-genchanges: warning: package octave-odepkg-dbgsym listed in files list but not in control info
dpkg-genchanges: binary-only upload (no source code included)
 dpkg-source --after-build octave-odepkg-0.8.5
dpkg-buildpackage: binary-only upload (no source included)
I: user script /var/cache/pbuilder/build//7578/tmp/hooks/B01_cleanup starting
I: user script /var/cache/pbuilder/build//7578/tmp/hooks/B01_cleanup finished
I: unmounting /sys filesystem
I: unmounting /dev/shm filesystem
I: unmounting dev/pts filesystem
I: unmounting run/shm filesystem
I: unmounting proc filesystem
I: cleaning the build env 
I: removing directory /var/cache/pbuilder/build//7578 and its subdirectories
I: Current time: lundi 31 août 2015, 10:42:30 (UTC+1400)
+ false
+ set +x
I: pbuilder-time-stamp: 1440967350
Format: 1.8
Date: Sun, 19 Jul 2015 18:19:46 +0200
Source: octave-odepkg
Binary: octave-odepkg
Architecture: amd64
Version: 0.8.5-1
Distribution: unstable
Urgency: medium
Maintainer: Debian Octave Group <pkg-octave-devel at lists.alioth.debian.org>
Changed-By: Sébastien Villemot <sebastien at debian.org>
Description:
 octave-odepkg - solve differential equations and initial value problems in Octave
Changes:
 octave-odepkg (0.8.5-1) unstable; urgency=medium
 .
   * Team upload.
 .
   [ Rafael Laboissiere ]
   * Imported Upstream version 0.8.5
   * d/copyright: Reflect upstream changes
   * Bump Standards-Version to 3.9.6 (no changes needed)
   * show-progress-in-rodas.patch: New patch
   * d/p/autoload-yes.patch: Remove patch (deprecated upstream)
   * d/p/correct-fflags-for-f77.patch: Refresh for new upstream version
Checksums-Sha1:
 03625a2d8369a76e88078c943f1bc7c17ef06df4 2107712 octave-odepkg-dbgsym_0.8.5-1_amd64.deb
 360fcb389c4df28356ddc7aa150cea3491b019dd 12500 octave-odepkg_0.8.5-1_amd64.buildinfo
 b289369477c88ae3eba6af185c5075dbc8454a5d 323618 octave-odepkg_0.8.5-1_amd64.deb
Checksums-Sha256:
 92689cb51af00c2ea3a3ed56d94c6104c2c9c70b5e631067fbe2219b0d528ee1 2107712 octave-odepkg-dbgsym_0.8.5-1_amd64.deb
 73c48b09e86e82c1e90a264ea2bf3b79f38bb0739cd195e8422dcaef85ad09bc 12500 octave-odepkg_0.8.5-1_amd64.buildinfo
 7b59f66b5ef9a7d280172bb84bde2fd5121b175a46cc327932b9666be64bacac 323618 octave-odepkg_0.8.5-1_amd64.deb
Files:
 74c5493e082ef79bd45b34f858614626 2107712 debugsym extra octave-odepkg-dbgsym_0.8.5-1_amd64.deb
 fe93d626fd4741551ab1d359e5e31033 12500 math optional octave-odepkg_0.8.5-1_amd64.buildinfo
 f0bf5939c0f0cd71750c0dc8b071fc5e 323618 math optional octave-odepkg_0.8.5-1_amd64.deb
rm: missing operand
Try 'rm --help' for more information.
/srv/reproducible-results/tmp.yQOGuvrjbT/tmp.kLfh76tEKO:	 90.1% -- replaced with /srv/reproducible-results/tmp.yQOGuvrjbT/tmp.kLfh76tEKO.gz
INFO: Starting at 2015-08-30 20:42:30.779829
INFO: Finished at 2015-08-30 20:42:30.784987, took: 0:00:00.005167
Sun 30 Aug 20:42:30 UTC 2015 - /srv/jenkins/bin/reproducible_build.sh stopped running as /tmp/jenkins-script-0PsM3sjs, which will now be removed.
Build step 'Execute shell' marked build as failure

More information about the Qa-jenkins-scm mailing list