[Qa-jenkins-scm] Build failed in Jenkins: reproducible_builder_gamma #64267
jenkins at jenkins.debian.net
jenkins at jenkins.debian.net
Sun Aug 30 22:13:53 UTC 2015
See <https://jenkins.debian.net/job/reproducible_builder_gamma/64267/>
------------------------------------------
[...truncated 363 lines...]
Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ...
dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested:
pbuilder-satisfydepends-dummy depends on libmodule-build-perl; however:
Package libmodule-build-perl is not installed.
Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ...
Reading package lists...
Building dependency tree...
Reading state information...
Initializing package states...
Writing extended state information...
Building tag database...
The following NEW packages will be installed:
libcpan-meta-perl{a} libmodule-build-perl{a}
0 packages upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 387 kB of archives. After unpacking 956 kB will be used.
Writing extended state information...
Get: 1 http://ftp.de.debian.org/debian/ unstable/main libcpan-meta-perl all 2.150005-1 [129 kB]
Get: 2 http://ftp.de.debian.org/debian/ unstable/main libmodule-build-perl all 0.421400-1 [258 kB]
Fetched 387 kB in 0s (10.6 MB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package libcpan-meta-perl.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20252 files and directories currently installed.)
Preparing to unpack .../libcpan-meta-perl_2.150005-1_all.deb ...
Unpacking libcpan-meta-perl (2.150005-1) ...
Selecting previously unselected package libmodule-build-perl.
Preparing to unpack .../libmodule-build-perl_0.421400-1_all.deb ...
Adding 'diversion of /usr/bin/config_data to /usr/bin/config_data.diverted by libmodule-build-perl'
Adding 'diversion of /usr/share/man/man1/config_data.1.gz to /usr/share/man/man1/config_data.diverted.1.gz by libmodule-build-perl'
Unpacking libmodule-build-perl (0.421400-1) ...
Processing triggers for man-db (2.7.2-1) ...
Setting up libcpan-meta-perl (2.150005-1) ...
Setting up libmodule-build-perl (0.421400-1) ...
Reading package lists...
Building dependency tree...
Reading state information...
Reading extended state information...
Initializing package states...
Writing extended state information...
Building tag database...
-> Finished parsing the build-deps
Reading package lists...
Building dependency tree...
Reading state information...
disorderfs is already the newest version.
fakeroot is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
I: Copying source file
I: copying [libdata-bitmask-perl_0.91-2.dsc]
I: copying [./libdata-bitmask-perl_0.91.orig.tar.gz]
I: copying [./libdata-bitmask-perl_0.91-2.debian.tar.xz]
I: Extracting source
gpgv: keyblock resource `/tmp/buildd/.gnupg/trustedkeys.gpg': file open error
gpgv: Signature made sam 06 jun 2015 04:25:17 GMT-14 using RSA key ID 8649AA06
gpgv: Can't check signature: public key not found
dpkg-source: warning: failed to verify signature on ./libdata-bitmask-perl_0.91-2.dsc
dpkg-source: info: extracting libdata-bitmask-perl in libdata-bitmask-perl-0.91
dpkg-source: info: unpacking libdata-bitmask-perl_0.91.orig.tar.gz
dpkg-source: info: unpacking libdata-bitmask-perl_0.91-2.debian.tar.xz
dpkg-source: info: applying fix-spelling
I: Building the package
W: no hooks of type A found -- ignoring
I: Running cd tmp/buildd/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" dpkg-buildpackage -us -uc -b -rfakeroot
dpkg-buildpackage: source package libdata-bitmask-perl
dpkg-buildpackage: source version 0.91-2
dpkg-buildpackage: source distribution unstable
dpkg-buildpackage: source changed by gregor herrmann <gregoa at debian.org>
dpkg-source --before-build libdata-bitmask-perl-0.91
dpkg-buildpackage: host architecture amd64
fakeroot debian/rules clean
dh clean
dh_testdir
dh_auto_clean
dh_clean
debian/rules build
dh build
dh_testdir
dh_auto_configure
perl Build.PL --installdirs vendor
Created MYMETA.yml and MYMETA.json
Creating new 'Build' script for 'Data-BitMask' version '0.91'
dh_auto_build
perl Build
Building Data-BitMask
dh_auto_test
perl Build test --verbose 1
t/test.t ..
1..47
# Running under perl version 5.020002 for linux
# Current time local: Mon Aug 31 12:13:43 2015
# Current time GMT: Sun Aug 30 22:13:43 2015
# Using Test.pm version 1.26
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok 14
ok 15
ok 16
ok 17
ok 18
ok 19
ok 20
ok 21
ok 22
ok 23
ok 24
ok 25
ok 26
ok 27
ok 28
ok 29
ok 30
ok 31
ok 32
ok 33
ok 34
ok 35
ok 36
ok 37
ok 38
ok 39
ok 40
ok 41
ok 42
ok 43
ok 44
ok 45
ok 46
ok 47
ok
All tests successful.
Files=1, Tests=47, 0 wallclock secs ( 0.05 usr 0.01 sys + 0.07 cusr 0.01 csys = 0.14 CPU)
Result: PASS
fakeroot debian/rules binary
dh binary
dh_testroot
dh_prep
dh_auto_install
perl Build install --destdir /tmp/buildd/libdata-bitmask-perl-0.91/debian/libdata-bitmask-perl --create_packlist 0
Building Data-BitMask
Installing /tmp/buildd/libdata-bitmask-perl-0.91/debian/libdata-bitmask-perl/usr/share/perl5/Data/BitMask.pm
Installing /tmp/buildd/libdata-bitmask-perl-0.91/debian/libdata-bitmask-perl/usr/share/man/man3/Data::BitMask.3pm
dh_installdocs
dh_installchangelogs
dh_installman
dh_perl
dh_link
dh_strip_nondeterminism
dh_compress
dh_fixperms
dh_installdeb
dh_gencontrol
dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
dh_md5sums
dh_builddeb
dpkg-deb: building package 'libdata-bitmask-perl' in '../libdata-bitmask-perl_0.91-2_all.deb'.
dpkg-genbuildinfo >../libdata-bitmask-perl_0.91-2_amd64.buildinfo
dpkg-distaddfile libdata-bitmask-perl_0.91-2_amd64.buildinfo perl optional
dpkg-distaddfile: warning: File::FcntlLock not available; using flock which is not NFS-safe
dpkg-genchanges -b >../libdata-bitmask-perl_0.91-2_amd64.changes
dpkg-genchanges: binary-only upload (no source code included)
dpkg-source --after-build libdata-bitmask-perl-0.91
dpkg-buildpackage: binary-only upload (no source included)
I: user script /var/cache/pbuilder/build//7924/tmp/hooks/B01_cleanup starting
I: user script /var/cache/pbuilder/build//7924/tmp/hooks/B01_cleanup finished
I: unmounting /sys filesystem
I: unmounting /dev/shm filesystem
I: unmounting dev/pts filesystem
I: unmounting run/shm filesystem
I: unmounting proc filesystem
I: cleaning the build env
I: removing directory /var/cache/pbuilder/build//7924 and its subdirectories
I: Current time: lundi 31 août 2015, 12:13:53 (UTC+1400)
I: pbuilder-time-stamp: 1440972833
+ false
+ set +x
Format: 1.8
Date: Fri, 05 Jun 2015 16:24:43 +0200
Source: libdata-bitmask-perl
Binary: libdata-bitmask-perl
Architecture: all amd64
Version: 0.91-2
Distribution: unstable
Urgency: medium
Maintainer: Debian Perl Group <pkg-perl-maintainers at lists.alioth.debian.org>
Changed-By: gregor herrmann <gregoa at debian.org>
Description:
libdata-bitmask-perl - bitmask manipulation class
Changes:
libdata-bitmask-perl (0.91-2) unstable; urgency=medium
.
* Team upload.
.
[ Salvatore Bonaccorso ]
* Update Vcs-Browser URL to cgit web frontend
.
[ gregor herrmann ]
* Declare compliance with Debian Policy 3.9.6.
* Add build dependency on libmodule-build-perl.
* Mark package as autopkgtest-able.
* Fix Vcs-Git URL.
* Don't install README. Just a text version of the POD/manpage.
Checksums-Sha1:
c0ccccf752615a578736d8c46eda4137c370f259 11660 libdata-bitmask-perl_0.91-2_all.deb
f335fdf9297ab7aec3ae6b46c79d86bb2c7039a0 4677 libdata-bitmask-perl_0.91-2_amd64.buildinfo
Checksums-Sha256:
5a2635a641f58978ad1180ca2a298b128f0c1443bc63eb8a0ee17c05651680d2 11660 libdata-bitmask-perl_0.91-2_all.deb
6aaf1a28b5ba1dc39f54b683c1150e502e3658e5d061e4aa657303cab0e3701d 4677 libdata-bitmask-perl_0.91-2_amd64.buildinfo
Files:
400158774c553d1e9601c6ce26c04fd3 11660 perl optional libdata-bitmask-perl_0.91-2_all.deb
07f23a46fd25b6583f2a5522ea136582 4677 perl optional libdata-bitmask-perl_0.91-2_amd64.buildinfo
rm: missing operand
Try 'rm --help' for more information.
/srv/reproducible-results/tmp.ULlsoj6Cw5/tmp.6P9bFhDf1Q: 62.8% -- replaced with /srv/reproducible-results/tmp.ULlsoj6Cw5/tmp.6P9bFhDf1Q.gz
INFO: Starting at 2015-08-30 22:13:53.473715
INFO: Finished at 2015-08-30 22:13:53.482853, took: 0:00:00.009151
Sun 30 Aug 22:13:53 UTC 2015 - /srv/jenkins/bin/reproducible_build.sh stopped running as /tmp/jenkins-script-ZtmvDp5H, which will now be removed.
Build step 'Execute shell' marked build as failure
More information about the Qa-jenkins-scm
mailing list