[Qa-jenkins-scm] Build failed in Jenkins: reproducible_builder_gamma #64288

jenkins at jenkins.debian.net jenkins at jenkins.debian.net
Sun Aug 30 23:22:43 UTC 2015 

See <https://jenkins.debian.net/job/reproducible_builder_gamma/64288/>

------------------------------------------
[...truncated 1059 lines...]
ok 46 - session_memory_size: memory size matches between runs
ok 47 - session_memory_size(ID) causes no exceptions
ok 48 - session_memory_size(ID): memory size matches between runs
ok 49 - session_event_list() causes no exceptions
ok 50 - session_event_list() returns data
ok 51 - session_event_list() returns more than one value
ok 52 - session_event_list() returns correct list of events
ok
t/02-alias.t .............. 
1..24
ok 1 - use POE::API::Peek;
ok 2 - session_id_loggable() causes no exceptions
ok 3 - session_id_loggable() returns proper string when no alias
ok 4 - session_id_loggable(session) causes no exceptions
ok 5 - session_id_loggable(session) returns proper string when no alias
ok 6 - session_id_loggable(ID) causes no exceptions
ok 7 - session_id_loggable(ID) returns proper string when no alias
ok 8 - session_id_loggable() causes no exceptions
ok 9 - session_id_loggable() returns proper string when alias is set
ok 10 - session_alias_count() causes no exceptions
ok 11 - session_alias_count() returns the proper alias count
ok 12 - session_alias_count(session) causes no exceptions
ok 13 - session_alias_count(session) returns the proper alias count
ok 14 - session_alias_count(ID) causes no exceptions
ok 15 - session_alias_count(ID) returns the proper alias count
ok 16 - session_alias_list() causes no exceptions
ok 17 - session_alias_list() returns proper amount of data
ok 18 - session_alias_list() returns proper data
ok 19 - session_alias_list(session) causes no exceptions
ok 20 - session_alias_list(session) returns proper data
ok 21 - session_alias_list(ID) causes no exceptions
ok 22 - session_alias_list(ID) returns proper data
ok 23 - resolve_alias() causes no exceptions
ok 24 - resolve_alias() resolves the provided alias properly
ok
t/03-event.t .............. 
1..20
ok 1 - use POE::API::Peek;
ok 2 - event_count_to() causes no exceptions
ok 3 - event_count_to() returns proper count
ok 4 - event_count_to(session) causes no exceptions
ok 5 - event_count_to(session) returns proper count
ok 6 - event_count_to(ID) causes no exceptions
ok 7 - event_count_to(ID) returns proper count
ok 8 - event_count_from() causes no exceptions
ok 9 - event_count_from() returns proper count
ok 10 - event_count_from(session) causes no exceptions
ok 11 - event_count_from(session) returns proper count
ok 12 - event_count_from(ID) causes no exceptions
ok 13 - event_count_from(ID) returns proper count
ok 14 - event_queue() causes no exceptions
ok 15 - event_queue() returns POE::Queue object
ok 16 - event_queue_dump() causes no exceptions: 
ok 17 - event_queue_dump() returns the right number of items
ok 18 - event_queue_dump() item has proper type
ok 19 - event_queue_dump() item has proper event name
ok 20 - event_queue_dump() item has proper source and destination
ok
t/04-extref.t ............. 
1..11
ok 1 - use POE::API::Peek;
ok 2 - extref_count() does not cause exceptions
ok 3 - extref_count() returns proper count
ok 4 - get_session_extref_count() does not cause exceptions
ok 5 - get_session_extref_count() returns proper count
ok 6 - get_session_extref_count(session) does not cause exceptions
ok 7 - get_session_extref_count(session) returns proper count
ok 8 - get_session_extref_count(ID) does not cause exceptions
ok 9 - get_session_extref_count(ID) returns proper count
ok 10 - get_session_extref_count() returns adjusted count
ok 11 - get_session_extref_count() returns adjusted count
ok
t/05-filehandle.t ......... 
1..11
ok 1 - use POE::API::Peek;
ok 2 - handle_count() causes no exceptions
ok 3 - handle_count() returns proper count
ok 4 - session_handle_count() causes no exceptions
ok 5 - session_handle_count() returns proper count
ok 6 - session_handle_count(session) causes no exceptions
ok 7 - session_handle_count(session) returns proper count
ok 8 - session_handle_count(ID) causes no exceptions
ok 9 - session_handle_count(ID) returns proper count
ok 10 - is_handle_tracked() causes no exceptions
ok 11 - is_handle_tracked() properly returns that STDIN is not being tracked
ok
t/06-signals.t ............ 
1..26
ok 1 - use POE::API::Peek;
ok 2 - get_safe_signals() does not cause exceptions
ok 3 - get_safe_signals() returns a list
ok 4 - get_signal_type() causes no exceptions
ok 5 - get_signal_type() returns proper type for SIG INT
ok 6 - is_signal_watched() causes no exceptions
ok 7 - is_signal_watched() correctly returns that INT is not being watched
ok 8 - is_signal_watched() causes no exceptions
ok 9 - is_signal_watched() correctly returns that INT is being watched
ok 10 - signals_watched_by_session() causes no exceptions
ok 11 - data returned from signals_watched_by_session() correctly indicates that INT is watched by this session
ok 12 - data returned from signals_watched_by_session() indicates that INT is being watched by the correct event
ok 13 - signals_watched_by_session(session) causes no exceptions
ok 14 - data returned from signals_watched_by_session(session) indicates that INT is being watched by the correct event
ok 15 - signals_watched_by_session(ID) causes no exceptions
ok 16 - data returned from signals_watched_by_session(ID) indicates that INT is being watched by the correct event
ok 17 - signal_watchers() causes no exceptions
ok 18 - signal_watchers() returns data
ok 19 - signal_watchers() notes that this session is watching INT
ok 20 - signal_watchers() notes that the proper event from this session is watching INT
ok 21 - is_signal_watched_by_session() causes no exceptions
ok 22 - is_signal_watched_by_sesion() correctly notes that this session is watching INT
ok 23 - is_signal_watched_by_session(session) causes no exceptions
ok 24 - is_signal_watched_by_sesion(session) correctly notes that this session is watching INT
ok 25 - is_signal_watched_by_session(ID) causes no exceptions
ok 26 - is_signal_watched_by_sesion(ID) correctly notes that this session is watching INT
ok
t/07-kernel.t ............. 
1..11
ok 1 - use POE::API::Peek;
ok 2 - is_kernel_running() successfully reports that Kernel is in fact running.
ok 3 - active_event() returns proper event name
ok 4 - kernel_memory_size() causes no exceptions
ok 5 - kernel_memory_size() returns data
ok 6 - kernel_memory_size() returns non-zero value
ok 7 - event_list() causes no exceptions
ok 8 - event_list() returns hashref
ok 9 - event_list() returns populated hashref
ok 10 - event_list() returns correct list of sessions and events
ok 11 - which_loop() loop name check
ok
t/08-pid.t ................ 
1..10
ok 1 - use POE::API::Peek;
ok 2 # skip POE version less than 1.350 required for these tests
ok 3 # skip POE version less than 1.350 required for these tests
ok 4 # skip POE version less than 1.350 required for these tests
ok 5 # skip POE version less than 1.350 required for these tests
ok 6 # skip POE version less than 1.350 required for these tests
ok 7 # skip POE version less than 1.350 required for these tests
ok 8 # skip POE version less than 1.350 required for these tests
ok 9 # skip POE version less than 1.350 required for these tests
ok 10 # skip POE version less than 1.350 required for these tests
ok
t/release-pod-coverage.t .. skipped: these tests are for release candidate testing
t/release-pod-syntax.t .... skipped: these tests are for release candidate testing
All tests successful.
Files=11, Tests=168,  2 wallclock secs ( 0.10 usr  0.02 sys +  1.53 cusr  0.22 csys =  1.87 CPU)
Result: PASS
make[1]: Leaving directory '/tmp/buildd/libpoe-api-peek-perl-2.2000'
 fakeroot debian/rules binary
dh binary
   dh_testroot
   dh_prep
   dh_auto_install
	make -j1 install DESTDIR=/tmp/buildd/libpoe-api-peek-perl-2.2000/debian/libpoe-api-peek-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr
make[1]: Entering directory '/tmp/buildd/libpoe-api-peek-perl-2.2000'
Installing /tmp/buildd/libpoe-api-peek-perl-2.2000/debian/libpoe-api-peek-perl/usr/share/perl5/POE/API/Peek.pm
Installing /tmp/buildd/libpoe-api-peek-perl-2.2000/debian/libpoe-api-peek-perl/usr/share/man/man3/POE::API::Peek.3pm
make[1]: Leaving directory '/tmp/buildd/libpoe-api-peek-perl-2.2000'
   dh_installdocs
   dh_installchangelogs
   dh_installman
   dh_perl
   dh_link
   dh_strip_nondeterminism
   dh_compress
   dh_fixperms
   dh_installdeb
   dh_gencontrol
dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
   dh_md5sums
   dh_builddeb
dpkg-deb: building package 'libpoe-api-peek-perl' in '../libpoe-api-peek-perl_2.2000-1_all.deb'.
 dpkg-genbuildinfo  >../libpoe-api-peek-perl_2.2000-1_amd64.buildinfo
 dpkg-distaddfile libpoe-api-peek-perl_2.2000-1_amd64.buildinfo perl extra
dpkg-distaddfile: warning: File::FcntlLock not available; using flock which is not NFS-safe
 dpkg-genchanges -b >../libpoe-api-peek-perl_2.2000-1_amd64.changes
dpkg-genchanges: binary-only upload (no source code included)
 dpkg-source --after-build libpoe-api-peek-perl-2.2000
dpkg-buildpackage: binary-only upload (no source included)
I: user script /var/cache/pbuilder/build//52019/tmp/hooks/B01_cleanup starting
I: user script /var/cache/pbuilder/build//52019/tmp/hooks/B01_cleanup finished
I: unmounting /sys filesystem
I: unmounting /dev/shm filesystem
I: unmounting dev/pts filesystem
I: unmounting run/shm filesystem
I: unmounting proc filesystem
I: cleaning the build env 
I: removing directory /var/cache/pbuilder/build//52019 and its subdirectories
I: Current time: lundi 31 août 2015, 13:22:42 (UTC+1400)
I: pbuilder-time-stamp: 1440976962
+ true
+ '[' -f b2/libpoe-api-peek-perl_2.2000-1_amd64.changes ']'
+ FTBFS=0
+ cat b1/libpoe-api-peek-perl_2.2000-1_amd64.changes
+ tee -a /srv/reproducible-results/tmp.VcMNSd5SVT/tmp.J0zCaKGtce
Format: 1.8
Date: Thu, 12 Jan 2012 22:47:48 +0100
Source: libpoe-api-peek-perl
Binary: libpoe-api-peek-perl
Architecture: all amd64
Version: 2.2000-1
Distribution: unstable
Urgency: low
Maintainer: Debian Perl Group <pkg-perl-maintainers at lists.alioth.debian.org>
Changed-By: gregor herrmann <gregoa at debian.org>
Description:
 libpoe-api-peek-perl - module to peek into the internals of a running POE environment
Closes: 652777
Changes:
 libpoe-api-peek-perl (2.2000-1) unstable; urgency=low
 .
   * New upstream release:
     - Work around session_pid_count() not working in 1.350 of POE
     Closes: #652777
   * Update years of packaging and upstream copyright.
   * Remove lintian override (there is an upstream changelog now).
Checksums-Sha1:
 ab1ba14b898e7b55a1ee556b5baf5a7a8774ab5b 16078 libpoe-api-peek-perl_2.2000-1_all.deb
 2ebe28b92f2f72c36897f5c04eb7e111f7327cd1 5058 libpoe-api-peek-perl_2.2000-1_amd64.buildinfo
Checksums-Sha256:
 2d6ef7701200002854ee16a5bdd3271334d4b10ef9a71d5fa3bba6083c95822c 16078 libpoe-api-peek-perl_2.2000-1_all.deb
 9673cd5a21e93c3a44a1b52691f88ef371831b7da4a23d97a9b2d516c1bbc964 5058 libpoe-api-peek-perl_2.2000-1_amd64.buildinfo
Files:
 a8ad9829d2f8a2a951ff3a8e9260159c 16078 perl extra libpoe-api-peek-perl_2.2000-1_all.deb
 1460c6acfbf4c08e33f46941898cde0e 5058 perl extra libpoe-api-peek-perl_2.2000-1_amd64.buildinfo
+ rm
rm: missing operand
Try 'rm --help' for more information.
+ cleanup_all
+ '[' 0 -eq 1 ']'
+ '[' '' = failure ']'
+ '[' '!' -z '' ']'
+ gzip -9fvn /srv/reproducible-results/tmp.VcMNSd5SVT/tmp.J0zCaKGtce
/srv/reproducible-results/tmp.VcMNSd5SVT/tmp.J0zCaKGtce:	 73.9% -- replaced with /srv/reproducible-results/tmp.VcMNSd5SVT/tmp.J0zCaKGtce.gz
+ '[' legacy = legacy ']'
+ gen_package_html libpoe-api-peek-perl
+ cd /srv/jenkins/bin
+ python3 -c 'import reproducible_html_packages as rep
pkg = rep.Package('\''libpoe-api-peek-perl'\'', no_notes=True)
rep.gen_packages_html([pkg], no_clean=True)'
INFO: Starting at 2015-08-30 23:22:42.979903
INFO: Finished at 2015-08-30 23:22:42.989039, took: 0:00:00.009146
+ cd -
+ cd
+ rm -r /srv/reproducible-results/tmp.VcMNSd5SVT
+ false
+ rm -f /tmp/reproducible-lockfile-unstable-amd64-libpoe-api-peek-perl
Sun 30 Aug 23:22:43 UTC 2015 - /srv/jenkins/bin/reproducible_build.sh stopped running as /tmp/jenkins-script-BbC8DXkJ, which will now be removed.
Build step 'Execute shell' marked build as failure

More information about the Qa-jenkins-scm mailing list