[Qa-jenkins-scm] Build failed in Jenkins: reproducible_builder_amd64_5 #146

jenkins at jenkins.debian.net jenkins at jenkins.debian.net
Tue Sep 1 00:21:33 UTC 2015


See <https://jenkins.debian.net/job/reproducible_builder_amd64_5/146/>

------------------------------------------
[...truncated 2899 lines...]
make[2]: Entering directory '/tmp/buildd/librecad-2.0.4/plugins'
cd asciifile/ && make -f Makefile check
cd align/ && make -f Makefile check
cd list/ && make -f Makefile check
cd sameprop/ && make -f Makefile check
cd importshp/ && make -f Makefile check
cd sample/ && make -f Makefile check
cd plotequation/ && make -f Makefile check
make[3]: Entering directory '/tmp/buildd/librecad-2.0.4/plugins/asciifile'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/tmp/buildd/librecad-2.0.4/plugins/asciifile'
make[3]: Entering directory '/tmp/buildd/librecad-2.0.4/plugins/align'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/tmp/buildd/librecad-2.0.4/plugins/align'
make[3]: Entering directory '/tmp/buildd/librecad-2.0.4/plugins/list'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/tmp/buildd/librecad-2.0.4/plugins/list'
make[3]: Entering directory '/tmp/buildd/librecad-2.0.4/plugins/importshp'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/tmp/buildd/librecad-2.0.4/plugins/importshp'
make[3]: Entering directory '/tmp/buildd/librecad-2.0.4/plugins/sample'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/tmp/buildd/librecad-2.0.4/plugins/sample'
make[3]: Entering directory '/tmp/buildd/librecad-2.0.4/plugins/plotequation'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/tmp/buildd/librecad-2.0.4/plugins/plotequation'
make[3]: Entering directory '/tmp/buildd/librecad-2.0.4/plugins/sameprop'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/tmp/buildd/librecad-2.0.4/plugins/sameprop'
make[2]: Leaving directory '/tmp/buildd/librecad-2.0.4/plugins'
cd tools/ && make -f Makefile check
make[2]: Entering directory '/tmp/buildd/librecad-2.0.4/tools'
cd ttf2lff/ && make -f Makefile check
make[3]: Entering directory '/tmp/buildd/librecad-2.0.4/tools/ttf2lff'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/tmp/buildd/librecad-2.0.4/tools/ttf2lff'
make[2]: Leaving directory '/tmp/buildd/librecad-2.0.4/tools'
make[1]: Leaving directory '/tmp/buildd/librecad-2.0.4'
 fakeroot debian/rules binary
dh binary --parallel
   dh_testroot -O--parallel
   dh_prep -O--parallel
   dh_auto_install -O--parallel
	make -j8 install DESTDIR=/tmp/buildd/librecad-2.0.4/debian/tmp AM_UPDATE_INFO_DIR=no INSTALL_ROOT=/tmp/buildd/librecad-2.0.4/debian/tmp
make[1]: Entering directory '/tmp/buildd/librecad-2.0.4'
cd libraries/ && make -f Makefile install
make[2]: Entering directory '/tmp/buildd/librecad-2.0.4/libraries'
cd libdxfrw/ && make -f Makefile install
cd jwwlib/ && make -f Makefile install
make[3]: Entering directory '/tmp/buildd/librecad-2.0.4/libraries/libdxfrw'
make[3]: Nothing to be done for 'install'.
make[3]: Leaving directory '/tmp/buildd/librecad-2.0.4/libraries/libdxfrw'
make[3]: Entering directory '/tmp/buildd/librecad-2.0.4/libraries/jwwlib'
make[3]: Nothing to be done for 'install'.
make[3]: Leaving directory '/tmp/buildd/librecad-2.0.4/libraries/jwwlib'
make[2]: Leaving directory '/tmp/buildd/librecad-2.0.4/libraries'
cd librecad/ && make -f Makefile install
make[2]: Entering directory '/tmp/buildd/librecad-2.0.4/librecad'
cd src/ && make -f Makefile install
make[3]: Entering directory '/tmp/buildd/librecad-2.0.4/librecad/src'
make[3]: Nothing to be done for 'install'.
make[3]: Leaving directory '/tmp/buildd/librecad-2.0.4/librecad/src'
make[2]: Leaving directory '/tmp/buildd/librecad-2.0.4/librecad'
cd plugins/ && make -f Makefile install
make[2]: Entering directory '/tmp/buildd/librecad-2.0.4/plugins'
cd asciifile/ && make -f Makefile install
cd align/ && make -f Makefile install
cd list/ && make -f Makefile install
cd sameprop/ && make -f Makefile install
cd importshp/ && make -f Makefile install
cd sample/ && make -f Makefile install
cd plotequation/ && make -f Makefile install
make[3]: Entering directory '/tmp/buildd/librecad-2.0.4/plugins/asciifile'
make[3]: Nothing to be done for 'install'.
make[3]: Leaving directory '/tmp/buildd/librecad-2.0.4/plugins/asciifile'
make[3]: Entering directory '/tmp/buildd/librecad-2.0.4/plugins/align'
make[3]: Nothing to be done for 'install'.
make[3]: Leaving directory '/tmp/buildd/librecad-2.0.4/plugins/align'
make[3]: Entering directory '/tmp/buildd/librecad-2.0.4/plugins/list'
make[3]: Entering directory '/tmp/buildd/librecad-2.0.4/plugins/sameprop'
make[3]: Nothing to be done for 'install'.
make[3]: Nothing to be done for 'install'.
make[3]: Leaving directory '/tmp/buildd/librecad-2.0.4/plugins/list'
make[3]: Leaving directory '/tmp/buildd/librecad-2.0.4/plugins/sameprop'
make[3]: Entering directory '/tmp/buildd/librecad-2.0.4/plugins/importshp'
make[3]: Nothing to be done for 'install'.
make[3]: Leaving directory '/tmp/buildd/librecad-2.0.4/plugins/importshp'
make[3]: Entering directory '/tmp/buildd/librecad-2.0.4/plugins/sample'
make[3]: Nothing to be done for 'install'.
make[3]: Leaving directory '/tmp/buildd/librecad-2.0.4/plugins/sample'
make[3]: Entering directory '/tmp/buildd/librecad-2.0.4/plugins/plotequation'
make[3]: Nothing to be done for 'install'.
make[3]: Leaving directory '/tmp/buildd/librecad-2.0.4/plugins/plotequation'
make[2]: Leaving directory '/tmp/buildd/librecad-2.0.4/plugins'
cd tools/ && make -f Makefile install
make[2]: Entering directory '/tmp/buildd/librecad-2.0.4/tools'
cd ttf2lff/ && make -f Makefile install
make[3]: Entering directory '/tmp/buildd/librecad-2.0.4/tools/ttf2lff'
make[3]: Nothing to be done for 'install'.
make[3]: Leaving directory '/tmp/buildd/librecad-2.0.4/tools/ttf2lff'
make[2]: Leaving directory '/tmp/buildd/librecad-2.0.4/tools'
make[1]: Leaving directory '/tmp/buildd/librecad-2.0.4'
   dh_install -O--parallel
   dh_installdocs -O--parallel
   dh_installchangelogs -O--parallel
   dh_installman -O--parallel
   dh_installmenu -O--parallel
   dh_installmime -O--parallel
   dh_icons -O--parallel
   dh_perl -O--parallel
   dh_link -O--parallel
   dh_strip_nondeterminism -O--parallel
   debian/rules override_dh_compress
make[1]: Entering directory '/tmp/buildd/librecad-2.0.4'
dh_compress -X.qch -X.qhc
make[1]: Leaving directory '/tmp/buildd/librecad-2.0.4'
   dh_fixperms -O--parallel
   dh_strip -O--parallel
   dh_makeshlibs -O--parallel
   dh_shlibdeps -O--parallel
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/librecad/usr/bin/librecad was not linked against libQtSql.so.4 (it uses none of the library's symbols)
   dh_installdeb -O--parallel
   dh_gencontrol -O--parallel
dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
   dh_md5sums -O--parallel
   dh_builddeb -O--parallel
dpkg-deb: building package 'librecad-dbgsym' in '../librecad-dbgsym_2.0.4-1_amd64.deb'.
dpkg-deb: building package 'librecad-data' in '../librecad-data_2.0.4-1_all.deb'.
dpkg-deb: building package 'librecad' in '../librecad_2.0.4-1_amd64.deb'.
 dpkg-genbuildinfo  >../librecad_2.0.4-1_amd64.buildinfo
 dpkg-distaddfile librecad_2.0.4-1_amd64.buildinfo graphics optional
dpkg-distaddfile: warning: File::FcntlLock not available; using flock which is not NFS-safe
 dpkg-genchanges -b >../librecad_2.0.4-1_amd64.changes
dpkg-genchanges: warning: package librecad-dbgsym listed in files list but not in control info
dpkg-genchanges: binary-only upload (no source code included)
 dpkg-source --after-build librecad-2.0.4
dpkg-buildpackage: binary-only upload (no source included)
I: unmounting /sys filesystem
I: unmounting /dev/shm filesystem
I: unmounting dev/pts filesystem
I: unmounting run/shm filesystem
I: unmounting proc filesystem
I: cleaning the build env 
I: removing directory /var/cache/pbuilder/build//14310 and its subdirectories
I: Current time: Mon Aug 31 12:23:37 GMT+12 2015
I: pbuilder-time-stamp: 1441067017
+ true
+ rm /srv/reproducible-results/tmp.XwsotUkFZV/pbuilderrc_6m7U
++ date -u
Tue Sep  1 00:23:37 UTC 2015 - build #1 for librecad/unstable/amd64 on profitbricks-build1-amd64 done
+ echo 'Tue Sep  1 00:23:37 UTC 2015 - build #1 for librecad/unstable/amd64 on profitbricks-build1-amd64 done'
+ exit 0
+ cleanup_all
+ '[' 0 -eq 1 ']'
+ '[' '' = failure ']'
+ '[' '!' -z '' ']'
+ gzip -9fvn /srv/reproducible-results/tmp.P2MDbMRY20/tmp.ev8a8mEPNk
/srv/reproducible-results/tmp.P2MDbMRY20/tmp.ev8a8mEPNk:	 96.7% -- replaced with /srv/reproducible-results/tmp.P2MDbMRY20/tmp.ev8a8mEPNk.gz
+ '[' 1 = legacy ']'
+ '[' 1 = ng ']'
+ false
+ rm -f /tmp/reproducible-lockfile-unstable-amd64-librecad
Tue Sep  1 00:23:37 UTC 2015 - /srv/jenkins/bin/reproducible_build.sh stopped running as /tmp/jenkins-script-w8zfQEKc, which will now be removed.
+ rsync -e 'ssh -p 22' -r profitbricks-build1-amd64.debian.net:/srv/reproducible-results/tmp.XwsotUkFZV/b1 /srv/reproducible-results/tmp.XwsotUkFZV/
jenkins_node_wrapper.sh[44271] remote_host called with rsync --server --sender -re.iLsfx . /srv/reproducible-results/tmp.XwsotUkFZV/b1
+ ls -R /srv/reproducible-results/tmp.XwsotUkFZV
/srv/reproducible-results/tmp.XwsotUkFZV:
b1
b2
librecad_2.0.8-1.debian.tar.xz
librecad_2.0.8-1.dsc
librecad_2.0.8.orig.tar.gz
tmp.5QNWcHFqcH

/srv/reproducible-results/tmp.XwsotUkFZV/b1:
build.log
librecad-data_2.0.4-1_all.deb
librecad-dbgsym_2.0.4-1_amd64.deb
librecad_2.0.4-1.debian.tar.xz
librecad_2.0.4-1.dsc
librecad_2.0.4-1_amd64.buildinfo
librecad_2.0.4-1_amd64.changes
librecad_2.0.4-1_amd64.deb
librecad_2.0.4.orig.tar.gz

/srv/reproducible-results/tmp.XwsotUkFZV/b2:
+ ssh -p 22 profitbricks-build1-amd64.debian.net 'rm -r /srv/reproducible-results/tmp.XwsotUkFZV'
jenkins_node_wrapper.sh[44276] remote_host called with rm -r /srv/reproducible-results/tmp.XwsotUkFZV
+ '[' '!' -f b1/librecad_2.0.8-1_amd64.changes ']'
+ '[' -f b1/librecad_2.0.4-1_amd64.changes ']'
+ echo 'Version mismatch between main node and first build node, aborting. Please upgrade the schroots...'
+ tee -a /srv/reproducible-results/tmp.XwsotUkFZV/tmp.5QNWcHFqcH
Version mismatch between main node and first build node, aborting. Please upgrade the schroots...
+ FTBFS=0
+ calculate_build_duration
++ date +%s
+ END=1441066891
+ DURATION=897
+ update_db_and_html depwait
+ STATUS=depwait
+ '[' -z 2.0.8-1 ']'
++ sqlite3 -init /var/lib/jenkins/reproducible.init /var/lib/jenkins/reproducible.db 'SELECT status FROM results WHERE package_id='\''10893'\'''
+ local OLD_STATUS=FTBFS
+ '[' FTBFS = reproducible ']'
+ '[' FTBFS '!=' depwait ']'
+ '[' 0 -eq 1 ']'
+ sqlite3 -init /var/lib/jenkins/reproducible.init /var/lib/jenkins/reproducible.db 'REPLACE INTO results (package_id, version, status, build_date, build_duration, builder) VALUES ('\''10893'\'', '\''2.0.8-1'\'', '\''depwait'\'', '\''2015-09-01 00:06'\'', '\''897'\'', '\''amd64_5/146'\'')'
+ '[' '!' -z 897 ']'
+ sqlite3 -init /var/lib/jenkins/reproducible.init /var/lib/jenkins/reproducible.db 'INSERT INTO stats_build (name, version, suite, architecture, status, build_date, build_duration, builder) VALUES ('\''librecad'\'', '\''2.0.8-1'\'', '\''unstable'\'', '\''amd64'\'', '\''depwait'\'', '\''2015-09-01 00:06'\'', '\''897'\'', '\''amd64_5/146'\'')'
+ sqlite3 -init /var/lib/jenkins/reproducible.init /var/lib/jenkins/reproducible.db 'DELETE FROM schedule WHERE package_id='\''10893'\'';'
+ gen_package_html librecad
+ cd /srv/jenkins/bin
+ python3 -c 'import reproducible_html_packages as rep
pkg = rep.Package('\''librecad'\'', no_notes=True)
rep.gen_packages_html([pkg], no_clean=True)'
INFO: Starting at 2015-09-01 00:21:32.616879
INFO: Finished at 2015-09-01 00:21:32.623098, took: 0:00:00.006229
+ cd -
+ echo

+ echo 'Successfully updated the database and updated https://reproducible.debian.net/rb-pkg/unstable/amd64/librecad.html'
Successfully updated the database and updated https://reproducible.debian.net/rb-pkg/unstable/amd64/librecad.html
+ echo

+ exit 1
+ cleanup_all
+ '[' 0 -eq 1 ']'
+ '[' '' = failure ']'
+ '[' '!' -z '' ']'
+ gzip -9fvn /srv/reproducible-results/tmp.XwsotUkFZV/tmp.5QNWcHFqcH
/srv/reproducible-results/tmp.XwsotUkFZV/tmp.5QNWcHFqcH:	 42.2% -- replaced with /srv/reproducible-results/tmp.XwsotUkFZV/tmp.5QNWcHFqcH.gz
+ '[' ng = legacy ']'
+ '[' ng = ng ']'
+ gen_package_html librecad
+ cd /srv/jenkins/bin
+ python3 -c 'import reproducible_html_packages as rep
pkg = rep.Package('\''librecad'\'', no_notes=True)
rep.gen_packages_html([pkg], no_clean=True)'
INFO: Starting at 2015-09-01 00:21:32.910468
INFO: Finished at 2015-09-01 00:21:32.916054, took: 0:00:00.005592
+ cd -
+ cd
+ rm -r /srv/reproducible-results/tmp.XwsotUkFZV
+ false
+ rm -f /tmp/reproducible-lockfile-unstable-amd64-librecad
Tue  1 Sep 00:21:33 UTC 2015 - /srv/jenkins/bin/reproducible_build.sh stopped running as /tmp/jenkins-script-vu4O1tbo, which will now be removed.
Build step 'Execute shell' marked build as failure



More information about the Qa-jenkins-scm mailing list